Winmate R15L100-MLC3HB Manuel utilisateur

Marque
Winmate
Modèle
R15L100-MLC3HB
Catégorie
Téléviseurs
Taper
Manuel utilisateur
Please read this instructions before operating the device and retain them for future reference.
15” G-WIN Military Display
R15L100-MLC3HB
User Manual
Version 1.0
Document Part Number: 915211101039
2
15" G-WIN Military Display User Manual
Contents
Preface ........................................................................................................................... 3
About This User Manual ............................................................................................. 7
Chapter 1: Introduction ................................................................................................ 8
1.1 About G-WIN Military Display ............................................................................... 9
1.2 Product Features .................................................................................................. 9
1.3 Package Overview ............................................................................................... 9
1.4 Product Overview ............................................................................................... 10
1.5 External Connectors ........................................................................................... 11
1.6 Physical Buttons and LED Indicators ................................................................. 11
Chapter 2: Installation ................................................................................................ 12
2.1 Mounting Guide .................................................................................................. 13
2.2 Cable Mounting Considerations ......................................................................... 14
2.3 Connecting the Power ........................................................................................ 14
2.4 Connecting Peripherals ...................................................................................... 16
2.5 Connector Description ........................................................................................ 16
2.5.1 Power Input Connector ............................................................................. 16
2.5.2 VGA Connector ........................................................................................ 17
2.5.3 RS-232 Connector for Touch .................................................................... 17
Chapter 3: Operating the Device ............................................................................... 18
3.1 Turning On/ Off the System ................................................................................ 19
3.2 Troubleshooting Guide ....................................................................................... 19
3.3 On-Screen Display Menu Navigation ................................................................. 20
Appendix...................................................................................................................... 21
Appendix A: Specifications ....................................................................................... 22
Appendix B: Frequency Table .................................................................................. 23
Appendix C: Military Grade Compliance ................................................................... 24
Appendix D: Remote Control Commands ................................................................ 25
Appendix E: Maintenance ........................................................................................ 27
3
Preface
Preface
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any form or
by any means, electronic or mechanical, for any purpose, without the prior written permission
of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective owners.
Disclaimer
We reserve the right to make changes, without notice, to any product, including circuits and/or
software described or contained in this manual in order to improve design and/or performance.
We assume no responsibility or liability for the use of the described product(s) conveys no
license or title under any patent, copyright, or masks work rights to these products, and make
no representations or warranties that these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified. Applications that are described in this
manual are for illustration purposes only. We make no representation or guarantee that such
application will be suitable for the specified use without further testing or modification.
Warranty
Our warranty guarantees that each of its products will be free from material and workmanship
defects for a period of one year from the invoice date. If the customer discovers a defect, we
will, at his/her option, repair or replace the defective product at no charge to the customer,
provide it is returned during the warranty period of one year, with transportation charges
prepaid. The returned product must be properly packaged in its original packaging to obtain
warranty service. If the serial number and the product shipping data differ by over 30 days, the
in-warranty service will be made according to the shipping date. In the serial numbers the third
and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g.,
with A for October, B for November and C for December). For example, the serial number
1W16Axxxxxxxx means October of year 2016.
Customer Service
We provide a service guide for any problem by the following steps: First, visit the website of
our distributor to find the update information about the product. Second, contact with your
distributor, sales representative, or our customer service center for technical support if you
need additional assistance.
You may need the following information ready before you call:
Product serial number
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers every business day. We are
always ready to give advice on application requirements or specific information on the
installation and operation of any of our products.
4
15" G-WIN Military Display User Manual
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful information or to
alert you to the potential for hardware damage or personal injury. These are Notes, Important,
Cautions, and Warnings. The following is an example of each type of advisory.
Note:
A note is used to emphasize helpful information
Important:
An important note indicates information that is important for you to know.
Caution/ Attention
A Caution alert indicates potential damage to hardware and explains how to
avoid the potential problem.
Unealerted’ attention indique un dommage possible à l’équipement et explique
comment éviter le problem potentiel.
Warning!/ Avertissement!
An Electrical Shock Warning indicates the potential harm from electrical
hazards and how to avoid the potential problem.
Un Avertissement de Choc Électriqueindique le potentiel de chocssur des
emplacements électriques et comment éviterces problèmes.
Alternating Current / Mise à la Terre
The Protective Conductor Terminal (Earth Ground) symbol indicates the
potential risk of serious electrical shock due to improper grounding.
Le symbole de Miseà Terre indique le risqué potential de choc électrique grave
à la terre incorrecte.
5
Preface
Safety Information
Caution/ Attention
Always ground yourself to remove any static charge before touching the CPU
card. Modern electronic devices are very sensitive to static electric charges. As
a safety precaution, use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded bag when they are
not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute charge statique avant
de toucher la carte CPU. Les équipements électroniques moderns sont très
sensibles aux décharges d’électricité statique. Toujours utiliser un bracelet de
mise à la terre comme précaution. Placer toutes les composantes
électroniques sur une surface conçue pour dissiper les charge, ou dans un sac
anti-statique lorsqu’elles ne sont pas dans le chassis.
6
15" G-WIN Military Display User Manual
Safety Precautions
For your safety carefully read all the safety instructions before using the device. Keep
this user manual for future reference.
Always disconnect this equipment from any AC outlet before cleaning. Do not use
liquid or spray detergents for cleaning. Use a damp cloth.
For pluggable equipment, the power outlet must be installed near the equipment
and must be easily accessible.
Keep this equipment away from humidity.
Put this equipment on a reliable surface during installation. Dropping it or letting it
fall could cause damage.
The openings on the enclosure are for air convection and to protect the equipment
from overheating.
Caution/ Attention
Do not cover the openings!
Before connecting the equipment to the power outlet make sure the voltage of the
power source is correct.
Position the power cord so that people cannot step on it. Do not place anything over
the power cord.
If the equipment is not used for a long time, disconnect it from the power source to
avoid damage by transient over-voltage.
Never pour any liquid into an opening. This could cause fire or electrical shock.
Never open the equipment. For safety reasons, only qualified service personnel
should open the equipment.
All cautions and warnings on the equipment should be noted.
Caution/ Attention
Always ground yourself to remove any static charge before touching the
board. Modern electronic devices are very sensitive to static electric
charges. As a safety precaution, use a grounding wrist strap at all times.
Place all electronic components in a static-dissipative surface or static-
shielded bag when they are not in the chassis.
7
Preface
About This User Manual
This User Manual provides information about using the Winmate® G-WN Military Display. The
documentation set provides information for specific user needs, and includes:
G-WIN Military Display User Manual – contains detailed description on how to use the
display, its components and features.
Models
Size
Model Name
15”
R15L100-MLC3HB
Note:
Some pictures in this guide are samples and can differ from actual product.
Document Revision History
Version
Date
Note
1.0
12-Dec-2018
New document release
8
15" G-WIN Military Display User Manual
Chapter 1: Introduction
This chapter gives you product overview, describes features and
hardware specification. You will find all accessories that come
with the display device in the packing list. Mechanical dimensions
and drawings included in this chapter.
9
Chapter 1: Introduction
1.1 About G-WIN Military Display
Congratulations on purchasing Winmate® WN Military Display. G-WIN Military series is designed
for use in military vehicles, standing up to the harshest environments and weather conditions. The
ultra-rugged display was developed to survive in-vehicle military applications with MIL-STD 810F
that withstands shocks and vibration.
1.2 Product Features
Winmate® G-WIN Military Display features:
15” LCD
Full IP65 dust and water protection
Aluminum housing with anti-corrosion treatments
Anti-shock and vibration MIL-STD-810F/G
Built-in ambient light sensor
5 wire resistive touchscreen / anti-reflection protection glass (Optional)
Wide Range Power Input 9 ~36V DC (Optional)
1.3 Package Overview
Carefully remove the box and unpack your display. Please check if all the items listed below are
inside your package. If any of these items are missing or damaged contact us immediately.
Standard accessories:
Display
User Manual
Touch Driver CD
Open Wire Cable
Varies by product
specifications
P/N: 915211101039
P/N: 9171111T100H
P/N: 94J003L020K2
Optional Accessories:
AC Adapter
50W:90PO12050000
80W:90PO12800000
Power Cord
Varies by destination
10
15" G-WIN Military Display User Manual
1.4 Product Overview
This section describes physical appearance of the G-WIN Military Display.
All dimensions shown in mm.
R15L100-MLC3HB
11
Chapter 1: Introduction
1.5 External Connectors
Terminal interfaces are located on the rear bottom side of the display.
Item
Description
Power Input - Military grade lockable power connector (MS27467T9F98S).
Example: DC power supply.
VGA - Transmits video from a PC to a monitor.
Example: A notebook PC to a monitor.
RS232 for Touch - Connects touch interface to the monitor.
Example: A touch to a monitor.
1.6 Physical Buttons and LED Indicators
Physical buttons and LED indicators located in front or on the rear side of the Display.
Physical Buttons
Icon
Function
PWR
Power - Turn on or turn off the display.
MENU
Menu - Call main OSD menu.
AUTO
Auto - Press this key to trigger the function for automatic adjustment (VGA channel only).
SWAP
Volume Up/ Swap - Press this key to increase the volume or SWAP function in OSD menu.
PIP
Volume Down/ PIP - Press this key to decrease the volume or PIP function in OSD menu.
Brightness Up - Increase the brightness of the display screen.
Brightness Down - Decrease the brightness of the display screen.
LED Adjustment - Adjust the brightness of the LED. Press this key to switch + and - to LED
sensor’s brightness adjustment from backlight brightness adjustment.
LED Indicators
Icon
Function
Power Indicator - Lights up in "Green" when the monitor turn on and the device functions
normally. Lights up in "Orange" when display is suspended.
Sleep - Lights up in "Orange" when the device cannot detect any input source.
12
15" G-WIN Military Display User Manual
Chapter 2: Installation
This chapter provides hardware installation instructions and
mounting guide for all available mounting options. Pay attention
to cautions and warning to avoid any damages
13
Chapter 2: Installation
2.1 Mounting Guide
15” G-WIN Military Display compatible with VESA mount solution. Follow the instruction below to
complete mounting.
VESA mounting instruction:
1. Screw VESA Bracket to the fixture (ex. wall) with M4 flathead screws.
2. Place the device on VESA bracket.
3. Carefully mount the device to the fixture (for ex. wall).
4. When the installation is complete, plug the power cord into a grounded AC outlet. Turn on
the power.
*Notice that VESA stand and mounting kit are not provided by Winmate
14
15" G-WIN Military Display User Manual
2.2 Cable Mounting Considerations
For a nice look and safe installation, make sure cables are neatly hidden behind the display.
Warning!/ Avertissement!
Observe all local installation requirements for connection cable type and
protection level.
Suivre tous les règlements locaux d’installations, de câblage et niveaux de
protection.
Warning!/ Avertissement!
Turn off the device and disconnect other peripherals before installation.
Éteindre l’appareil et débrancher tous les périphériques avant l’installation.
Warning!/ Avertissement!
Follow mounting instructions and use recommended mounting hardware to
avoid the risk of injury.
Suivez les instructions de montage et d'utilisation recommandé le matériel de
montage pour éviter le risque de blessure.
2.3 Connecting the Power
Safety Precautions:
Do not use the adapter in a high moisture environment.
Never touch the adapter with wet hands or foot.
Allow adequate ventilation around adapter while using.
Do not cover the adapter with paper or other objects that will reduce cooling.
Do not use the adapter while it is inside a carrying case.
Do not use the adapter if the cord is damaged.
There are NO serviceable parts inside.
Replace the unit if it is damaged or exposed to excess moisture.
Alternating Current !/ Mise a le Terre!
To prevent electrical shock, the Safety Ground location on the rear must be
bonded to the local earth ground through a minimum 12 AWG wire as short as
possible
Pour éviter les chocs électriques, l’emplacement de la prise terre à l’arrière
doit être lié à terre locale, à travers un 12 AWG minimum et aussi court que
possible.
15
Chapter 2: Installation
Connecting to Power Source
1. Connect a power cable to military power connector located on the back side of the display.
2. Connect open wires to the source of power.
16
15" G-WIN Military Display User Manual
2.4 Connecting Peripherals
The 15-inch G-WIN Military Display feature military grade connectors: Power, VGA and RS-232 for
touch.
2.5 Connector Description
2.5.1 Power Input Connector
The display has one 3-pin military grade lockable power input connector (MS27467T9F98S).
Pin assignment and signal names of power input connector
Pin
Signal Name
1
VCC+
2
VCC-
3
GND
17
Chapter 2: Installation
2.5.2 VGA Connector
The display has one 13-pin VGA connector (JY27466T11F35PN) for video input.
2.5.3 RS-232 Connector for Touch
The display has one 13-pin RS-232 connector (JY27466T11F35PN) for touch.
18
15" G-WIN Military Display User Manual
Chapter 3: Operating the Device
In this chapter you will find instructions on how to operate the
display.
19
Chapter 3: Operating the Device
3.1 Turning On/ Off the System
To turn on the system:
1. Connect VGA cable to the connector of your device.
2. Connect the other side of VGA cable to external computer.
3. Turn on the external computer.
4. The device will boot automatically when powered on.
To turn on the system:
1. Disconnect the Display from external computer to completely turn off the device.
3.2 Troubleshooting Guide
If your monitor fails to operate correctly, check the following chart for possible solution before
calling for repairs:
Condition
Check Point
The picture does not
appear
• Check if the signal cable is firmly seated in the socket.
• Check if the Power is ON at the computer
• Check if the brightness control is at the appropriate
position, not at the minimum.
The screen is not
synchronized
• Check if the signal cable is firmly seated in the socket.
• Check if the output level matches the input level of your
computer.
• Make sure the signal timings of the computer system are
within the specification of the monitor.
The position of the
screen is not in the
center
• Adjust the H-position, and V-position, or Perform the Auto
adjustment.
The screen is too
bright (too dark)
• Check if the brightness or contrast control is at the
appropriate position, not at the Maximum (Minimum).
The screen is shaking
or waving
• Perform the Auto adjustment.
• Moving all objects which emit a magnetic field such as
motor or transformer, away from the monitor.
• Check if the specific voltage is applied.
• Check if the signal timing of the computer system is
within the specification of monitor.
*If you are unable to correct the fault by using this chart, stop using your monitor and contact your
distributor or dealer for further assistance
20
15" G-WIN Military Display User Manual
3.3 On-Screen Display Menu Navigation
OSD Icon
Sub-menu
Settings
Note
BRICONTRAST
BRIGHTNESS
slider bar
Default 50
Use to adjust the screen’s brightness. Range 0 to 100.
CONTRAST
slider bar
Default 50
Use to adjust the screen’s contrast. Range 0 to 100.
POSITION
H POSITION
slider bar
Use to adjust the image to the left or right on the screen.
V POSITION
slider bar
Use to adjust the image up or down on the screen.
IMAGE
AUTO
Select and execute
Use to choose the best settings for the current input signal
CLOCK
slider bar
Default 50
Use to adjust the value of horizontal image. Range 0 to 100
PHASE
slider bar
Default 50
Use to adjust the phase control (May be required to optimize the display quality).
WHITE BALANCE
Select and execute
Use to set RGB signal voltage level.
COLOR
USER
R.G.B slider bar
Choose RED/GREEN/BLUE to set value of color temperature brightness.
9300K
Select and execute
Use to set value of monitor for the CIE coordinate 9300 color temperature.
6500K
Select and execute
Use to set value of monitor for the CIE coordinate 6500 color temp.
GAMMA
GAMMA 0
Select and execute
Default GAMMA0
Choose the parameter of GAMMA 0 as default setting.
GAMMA 1
Select and execute
Choose the parameter of GAMMA 1 as default setting.
GAMMA 2
Select and execute
Choose the parameter of GAMMA 2 as default setting.
AUDIO
VOLUME ADJUST
Select and execute
Optional item
Use to adjust the volume of speaker.
SPEAKER ON/OFF
Select and execute
Optional item
Use to make the speaker work or mute.
CHANNEL
ANALOG
Select and execute
Default
Use to change the input signal to Analog mode.
CVBS
Select and execute
Optional item
Use to change the input signal to Composite mode.
S-VIDEO
Select and execute
Optional item
Use to change the input signal to S-Video mode.
RECALL
YES
Select and execute
Recall the factory default setting
NO
Select and execute
Return to main menu
EXIT
YES
Select and execute
Exit the OSD menu
NO
Select and execute
Return to main menu
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Winmate R15L100-MLC3HB Manuel utilisateur

Marque
Winmate
Modèle
R15L100-MLC3HB
Catégorie
Téléviseurs
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents