Winmate W24L100-MLA2FP Manuel utilisateur

Please read this instructions before operating the device and retain them for future reference.

15~32” P-Cap Rack Mount

Military Display

Model No.R15L600-MLA3FP

R17L100-MLA1FP

R19L100-MLA3FP

W24L100-MLA2FP

W32L100-MLA3FP

User Manual

V1.0

For more information on this and

other Winmate products, please

visit our website at:

www.winmate.com

Document Part Number: 9152111I109B

User Manual Contents

- 2 -

CONTENTS

PREFACE - 3 -

ABOUT THIS USER MANUAL - 8 -

CHAPTER 1: INTRODUCTION - 10 -

1.1 Product Features ....................................................................... - 10 -

1.2 Package Contents ..................................................................... - 11 -

1.3 Rear Components ..................................................................... - 12 -

1.4 Panel Controls ........................................................................... - 13 -

1.5 Dimensions ................................................................................ - 14 -

CHAPTER 2: INSTALLATION - 18 -

2.1 Wiring Requirements ................................................................. - 18 -

2.2 Mounting the Display ................................................................. - 19 -

2.2.1 Console/ Rack Mount ................................................ - 19 -

2.2.2 VESA Mount ............................................................. - 20 -

2.2 Powering On .............................................................................. - 21 -

2.2.1 Connecting to AC Input Power Source (Default) ....... - 22 -

2.2.2 Connecting to DC Input Power Source (Optional)..... - 23 -

2.3 Connecting Other Devices ......................................................... - 24 -

2.3.1 VGA Connector ......................................................... - 24 -

2.3.2 BNC Connector ......................................................... - 25 -

2.3.3 DVI-D Connector....................................................... - 25 -

2.3.4 HDMI Connector ....................................................... - 26 -

CHAPTER 3: OPERATING THE DEVICE - 28 -

3.1 Navigating the OSD Menu ......................................................... - 28 -

3.2 OSD Menu in VGA Mode........................................................... - 29 -

3.3 OSD Menu in DVI Mode ............................................................ - 32 -

APPENDIX A: TECHNICAL SPECIFICATIONS - 35 -

APPENDIX B: MILITARY GRADE COMPLIANCE - 37 -

APPENDIX C: MAINTENANCE - 39 -

User Manual Preface

- 3 -

PREFACE

Copyright Notice

No part of this document may be reproduced, copied, translated, or

transmitted in any form or by any means, electronic or mechanical, for any

purpose, without the prior written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their

respective owners.

Disclaimer

We reserve the right to make changes, without notice, to any product,

including circuits and/or software described or contained in this manual in

order to improve design and/or performance. We assume no responsibility or

liability for the use of the described product(s) conveys no license or title

under any patent, copyright, or masks work rights to these products, and

make no representations or warranties that these products are free from

patent, copyright, or mask work right infringement, unless otherwise specified.

Applications that are described in this manual are for illustration purposes

only. We make no representation or guarantee that such application will be

suitable for the specified use without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material

and workmanship defects for a period of one year from the invoice date. If the

customer discovers a defect, we will, at his/her option, repair or replace the

defective product at no charge to the customer, provide it is returned during

the warranty period of one year, with transportation charges prepaid. The

returned product must be properly packaged in its original packaging to obtain

warranty service. If the serial number and the product shipping data differ by

over 30 days, the in-warranty service will be made according to the shipping

date. In the serial numbers the third and fourth two digits give the year of

manufacture, and the fifth digit means the month (e. g., with A for October, B

for November and C for December).

For example, the serial number 1W18Axxxxxxxx means October of year

2018.

User Manual Preface

- 4 -

Customer Service

We provide a service guide for any problem by the following steps: First, visit

the website of our distributor to find the update information about the product.

Second, contact with your distributor, sales representative, or our customer

service center for technical support if you need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers every

business day. We are always ready to give advice on application

requirements or specific information on the installation and operation of any of

our products.

Federal Communications Commission Radio

Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received

including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a

class "B" digital device, pursuant to part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at him own expense.

.

User Manual Preface

- 5 -

European Union

This equipment is in conformity with the requirement of

the following EU legislations and harmonized

standards. Product also complies with the Council

directions.

Electromagnetic Compatibility Directive (2014/30/EU)

 EN55024: 2010/ A1: 2015

o IEC61000-4-2: 2009

o IEC61000-4-3: 2006+A1: 2007+A2: 2010

o IEC61000-4-4: 2012

o IEC61000-4-5: 2014

o IEC61000-4-6: 2014

o IEC61000-4-8: 2010

o IEC61000-4-11: 2004

 EN55032: 2012/AC:2013

 EN61000-3-2:2014

 EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

 EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

User Manual Preface

- 6 -

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful

information or to alert you to the potential for hardware damage or personal injury.

These are Notes, Important, Cautions, and Warnings. The following is an

example of each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to

know.

CAUTION/ ATTENTION!

A Caution alert indicates potential damage to hardware and

explains how to avoid the potential problem.

Unealerted’ attention indique un dommage possible à

l’équipement et explique comment éviter le problem potentiel.

WARNING!/AVERTISSEMENT!

An Electrical Shock Warning indicates the potential harm from

electrical hazards and how to avoid the potential problem.

Un Avertissement de Choc Électriqueindique le potentiel de

chocssur des emplacements électriques et comment éviterces

problèmes.

ALTERNATING CURRENT / MISE À LE TERRE!

The Protective Conductor Terminal (Earth Ground) symbol

indicates the potential risk of serious electrical shock due to

improper grounding.

Le symbole de Miseà Terre indique le risqué potential de choc

électrique grave à la terre incorrecte.

User Manual Preface

- 7 -

Safety Information

WARNING!

This monitor is equipped with Mini USB port, signals and power is

obtained from standard USB 2.0 or USB 3.0 port. Do not expose

this unit in the rain or moisture environment to damage the

monitor.

CAUTION!

Do not touch the surface of the LCD panel. Pressure on the panel

may cause non-uniformity of color or disorientation of the liquid

crystals.

PRECAUTIONS:

• Do not use the monitor near water.

• Do not place the monitor on an unstable cart, stand, or table. If the monitor

falls, it can injure a person and cause serious damage to the appliance. Use

only a cart or stand recommended by the manufacturer or sold with the

monitor. If you mount the monitor on a wall or shelf, use a mounting kit

approved by the manufacturer and follows the kit instructions.

• The monitor should be operated with an USB cable with Mini USB B type

connector on monitor end and standard USB A type connector on the other

end to PC or USB signal source.

• Normally it is packed with monitor.

• Never spill liquids on the monitor.

• Do not attempt to service the monitor yourself; opening or removing covers

can damage to the monitor or panel. Please refer all servicing to qualified

service personnel.

• For Wall mount adaptor, wall socket shall be installed near the equipment and

shall be easily accessible.

User Manual About This User Manual

- 8 -

ABOUT THIS USER MANUAL

This User Manual provides information about using the 15~32” P-Cap Rack

Mount Display. The documentation set provides information for specific user

needs, and includes:

 15~32” P-Cap Rack Mount Display User Manual – contains detailed

description on how to use the display, its components and features.

NOTE:

Some pictures in this guide are samples and can differ from actual

product.

Document Revision History

Version

Date

Note

1.0

5-Mar-2018

New document release

User Manual Chapter 1 Introduction

- 9 -

INTRODUCTION

This chapter gives you product overview,

describes features and hardware

specification. You will find all accessories

that come with the display device in the

packing list. Mechanical dimensions and

drawings included in this chapter.

User Manual Chapter 1 Introduction

- 10 -

CHAPTER 1: INTRODUCTION

Congratulations on purchasing Winmate® 15~32” P-Cap Rack Mount Military

Display. Military Grade Display features anti-corrosive coating with aluminum

alloy housing withstands the harshest military environments. Armored power

connector MIL-DTL-38999 Type I initially developed for aerospace industry

perfectly fit in our Military grade product line.

Withstanding rigors of harsh environments and tough weather conditions these

Displays meet the most demanding requirements. Suitable for Army

Headquarters and being connected to mobile devices on the field Display can

provide up-to-date information for immediate commands.

1.1 Product Features

P-Cap Rack Mount Military Display features:

• 15~32” Projected Capacitive (P-Cap) multitouch screen

• Compliant with military standard MIL-STD-810G/F

• Anti-corrosion housing

• Flush and rack mount mechanical design (8U)

• Convenient on-screen display controls

• Built-in light sensor for auto brightness control

• Military grade power connector (MIL-DTL-38999/1)

• Default with Standard AR Glass

• DC 9~36V power input with isolation (Optional)

User Manual Chapter 1 Introduction

- 11 -

1.2 Package Contents

Carefully remove the box and unpack your display. Please check if all the items

listed below are inside your package. If any of these items are missing or

damaged contact us immediately.

Standard package includes:

Display

User Manual

(Hardcopy)

Power Cord

MIL-DTL-38999/1 (2m)

VGA Cable (2m)

DVI Cable (2m)

VGA to 5 BNC

Shielding Cable (2m)

*Not supplied for 32” model

The package may include the following optional items based on your order:

1 x Touch Driver CD

1 x Touch RS-232 Shielding Cable, 2 meter

1 x RS-232 Remote Control Shielding Cable, 2 meter

1 x HDMI Cable

User Manual Chapter 1 Introduction

- 12 -

1.3 Rear Components

Display connectors are located on the bottom rear side of the display.

*Notice that this is a picture for reference. I/O position varies by display size. Refer to the

section 1.5 Dimensions of this user manual to check mechanical drawing and I/O

position.

Component

Function

1

Power input connector

AC in 220V ±10%, 50 ± 3% Hz

2

BNC connectors

Transmits analog and serial digital interface

video signals or composite video.

3

VGA connector

The 15-pin VGA connector transmits video from

video source to display.

4

RS232 (Optional)

For touch interface.

5

DVI-D connector

Transmits uncompressed digital video from

video source to display.

User Manual Chapter 1 Introduction

- 13 -

1.4 Panel Controls

Panel controls are located on the front side of the display.

Control

Function

1

Power

Press to turn on or turn off the display.

2

Down

Press this key to decrease screen brightness.

Use to navigate items of a single OSD menu.

3

Up

Press this key to increase screen brightness.

Use to navigate items of a single OSD menu.

4

Exit/ Auto

Automatically adjusts brightness of the display screen, or

allows user to exit the OSD menu.

5

Menu

Allows user to enter the main menu.

6

Day/ Night

Tap this button to enter DAY MODE.

Tap this button to enter NIGHT MODE to increase visibility

in low-light conditions.

7

Power LED

Lights up green when the display turns on; signalizes

that display functions normally.

Lights up orange when display is suspended.

8

Lock LED

Lights up red when OSD button locked.

OFF Turns off when OSD button lock function disabled.

9

Lock/ Unlock

Tap this button to lock/ unlock the function of OSD panel.

10

Light Sensor

Detect light density.

User Manual Chapter 1 Introduction

- 14 -

1.5 Dimensions

15-inch Display, R15L600-MLA3FP

Unit: mm

Dimensions: 402 x 321 x 70

17-inch Display, R17L100-MLA1FP

Unit: mm

Dimensions: 482 x 399.3 x 79.6

User Manual Chapter 1 Introduction

- 15 -

19-inch Display, R19L100-MLA3FP

Unit: mm

Dimensions: 482.6 x 399.3 x 76.9

24-inch Display, W24L100-MLA2FP

Unit: mm

Dimensions: 635.2 x 430.9 x 66

User Manual Chapter 1 Introduction

- 16 -

32-inch Display, W32L100-MLA3FP

Unit: mm

Dimensions: 825 x 486 x 88.5

User Manual Chapter 2 Installation

- 17 -

INSTALLATION

This chapter provides hardware installation

instructions and mounting guide for all

available mounting options. Pay attention to

cautions and warning to avoid any damages.

User Manual Chapter 2 Installation

- 18 -

CHAPTER 2: INSTALLATION

This chapter provides hardware installation instructions and mounting guide for all

available mounting options. Pay attention to cautions and warning to avoid any

damages.

CAUTION/ ATTENTION

Follow mounting instructions and use recommended mounting

hardware to avoid the risk of injury.

Suivez les instructions de montage et d'utilisation recommandé le

matériel de montage pour éviter le risque de blessure.

CAUTION/ ATTENTION

Turn off the device and disconnect other peripherals before

installation.

Éteindre l’appareil et débrancher tous les périphériques avant

l’installation.

2.1 Wiring Requirements

The following common safety precautions should be observed before installing

any electronic device:

 Strive to use separate, non-intersecting paths to route power and

networking wires. If power wiring and device wiring paths must cross make

sure the wires are perpendicular at the intersection point.

 Keep the wires separated according to interface. The rule of thumb is that

wiring that shares similar electrical characteristics may be bundled

together.

 Do not bundle input wiring with output wiring. Keep them separate.

 When necessary, it is strongly advised that you label wiring to all devices

in the system.

 Do not run signal or communication wiring and power wiring in the same

conduit. To avoid interference, wires with different signal characteristics

(i.e., different interfaces) should be routed separately.

 Be sure to disconnect the power cord before installing and/or wiring your

device.

 Verify the maximum possible current for each wire gauge, especially for

the power cords. Observe all electrical codes dictating the maximum

current allowable for each wire gauge.

 If the current goes above the maximum ratings, the wiring could overheat,

causing serious damage to your equipment.

Be careful when handling the unit. When the unit is plugged in, the internal

components generate a lot of heat which may leave the outer casing too hot to

touch.

User Manual Chapter 2 Installation

- 19 -

2.2 Mounting the Display

The Military Display supports different mounting options. Refer to sub-sections

below for more details.

2.2.1 Console/ Rack Mount

The main mounting approach for military applications is rack mount - very user-

friendly in terms of installation.

Installation Instruction:

1. Prepare a fixture for the specific dimensions of the device.

2. Cut a hole on a sub frame or panel according to the cutout dimensions.

3. Install the device properly onto the cutout area of the sub frame or panel with

the sides of the front bezel.

4. Fix the device from the outside to the fixture with four M6 truss head screws.

Console / Rack Mount Installation

Size

Cutout Dimensions (W x D)

Screw Size

15”

358.6 x 300.2 mm

M4 truss head (4 pcs)

17”

449 x 367 mm

M4 truss head (4 pcs)

19”

447 x 378 mm

M4 truss head (4 pcs)

23.8”

555 x 387 mm

M6 truss head (4 pcs)

32”

769.5 x 468 mm

M6 truss head (4 pcs)

User Manual Chapter 2 Installation

- 20 -

2.2.2 VESA Mount

The Military Display supports VESA Mount installation. Notice that VESA Plate is

not included in Winmate’s standard accessories package.

Installation Instruction:

1. Turn off the display and disconnect peripherals.

2. Screw VESA bracket to the fixture (ex. swing arm) with four M4 VESA

screws.

3. Place the device on VESA bracket.

4. Follow instructions supplied with your mounting kit.

5. Connect cables, power on the display.

VESA Mount Installation

*Notice that VESA stand and mounting kit are not provided by Winmate.

Size

VESA Plate

Screw Size

15”

75 x 75 mm

M4 VESA, D=5 mm (4 pcs)

17”

100 x 100 mm

M6 VESA, D=6 mm (4 pcs)

19”

100 x 100 mm

M6 VESA, D=6 mm (4 pcs)

24”

100 x 100 mm

100 x 200 mm

M6 VESA, D=6 mm (4 pcs)

32”

100 x 100 mm

100 x 200 mm

M6 VESA, D=6 mm (4 pcs)

La page charge ...

Winmate W24L100-MLA2FP Manuel utilisateur

Ce manuel convient également à

Winmate W24L100-MLA2FP Manuel utilisateur

dans d''autres langues

Documents connexes