Winmate W18L100-PTA2HB Manuel utilisateur

Please read these instructions carefully before using this product, and save this manual for future use.

PT Series Display

15”/ 15.6”/ 18.5”/ 32”

Model No. R15L100-PTC3

W15L100-PTA3

W18L100-PTA2(HB)

W32L100-PTA2

User Manual

Document Version 1.1

Document Part Number: 91521110105R

2 PT Series Display User Manual

Contents

Preface 3

About This User Manual 6

Chapter 1: Introduction 7

1.1 Overview 8

1.2 Product Features 8

1.3 Package Contents 8

1.4 Product Overview 9

1.5 Control Buttons and LED Indicators 11

Chapter 2: Installation 14

2.1 Wiring Requirements 15

2.2 Mounting Guide 15

2.3 Cable Mounting Considerations 17

2.4 Connecting Power 17

2.5 Connecting Peripherals 18

2.6 Connector Description 19

2.6.1 VGA Connector 19

2.6.2 HDMI Connector 19

2.6.3 USB for Touch 19

2.6.4 RS-232 for Remote Control 20

2.7 Turning on the System 20

Chapter 3: Operating the Device 21

3.1 OSD Menu Navigation 22

3.2 Troubleshooting Guide 23

Appendix 24

Appendix A: Technical Specifications 25

Appendix B: Frequency Table 26

3 Preface

Preface

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted in any form or

by any means, electronic or mechanical, for any purpose, without the prior written permission

of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits and/or

software described or contained in this manual in order to improve design and/or performance.

We assume no responsibility or liability for the use of the described product(s) conveys no

license or title under any patent, copyright, or masks work rights to these products, and make

no representations or warranties that these products are free from patent, copyright, or mask

work right infringement, unless otherwise specified. Applications that are described in this

manual are for illustration purposes only. We make no representation or guarantee that such

application will be suitable for the specified use without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and workmanship

defects for a period of one year from the invoice date. If the customer discovers a defect, we

will, at his/her option, repair or replace the defective product at no charge to the customer,

provide it is returned during the warranty period of one year, with transportation charges

prepaid. The returned product must be properly packaged in its original packaging to obtain

warranty service. If the serial number and the product shipping data differ by over 30 days, the

in-warranty service will be made according to the shipping date. In the serial numbers the third

and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g.,

with A for October, B for November and C for December).

For example, the serial number 1W20Axxxxxxxx means October of year 2020.

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of

our distributor to find the update information about the product. Second, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance.

You may need the following information ready before you call:

• Product serial number

• Software (OS, version, application software, etc.)

• Description of complete problem

• The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We are

always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

4 PT Series Display User Manual

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or

to alert you to the potential for hardware damage or personal injury. These are Notes,

Important, Cautions, and Warnings. The following is an example of each type of advisory.

Note:

A note is used to emphasize helpful information

Important:

An important note indicates information that is important for you to know.

Caution A Caution alert indicates potential damage to hardware and

explains how to avoid the potential problem.

Attention Unealerted’ attention indique un dommage possible à

l’équipement et explique comment éviter le problem potentiel.

Warning! An Electrical Shock Warning indicates the potential harm from

electrical hazards and how to avoid the potential problem.

Avertissement! Un Avertissement de Choc Électriqueindique le potentiel

de chocssur des emplacements électriques et comment éviterces problèmes.

Alternating Current The Protective Conductor Terminal (Earth Ground)

symbol indicates the potential risk of serious electrical shock due to improper

grounding.

Mise à la Terre Le symbole de Miseà Terre indique le risqué potential de

choc électrique grave à la terre incorrecte.

5 Preface

Safety Information

Warning!

Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections while the

power is on. Sensitive electronic components can be damaged by sudden

power surges. Only experienced electronics personnel should open the PC

chassis.

Avertissement! Toujours débrancher le cordon d’alimentation du chassis

lorsque vous travaillez sur celui-ci. Ne pas brancher de connections lorsque

l’alimentation est présente. Des composantes électroniques sensibles

peuvent être endommagées par des sauts d’alimentation. Seulement du

personnel expérimenté devrait ouvrir ces chassis.

Caution

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very sensitive to static

electric charges. As a safety precaution, use a grounding wrist strap at all

times. Place all electronic components in a static-dissipative surface or static-

shielded bag when they are not in the chassis.

Attention Toujours verifier votre mise à la terre afin d’éliminer toute charge

statique avant de toucher la carte CPU. Les équipements électroniques

moderns sont très sensibles aux décharges d’électricité statique. Toujours

utiliser un bracelet de mise à la terre comme précaution. Placer toutes les

composantes électroniques sur une surface conçue pour dissiper les charge,

ou dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.

Safety Precautions

For your safety carefully read all the safety instructions before using the device. Keep this

user manual for future reference.

• Always disconnect this equipment from any AC outlet before cleaning. Do not use liquid

or spray detergents for cleaning. Use a damp cloth.

• For pluggable equipment, the power outlet must be installed near the equipment and

must be easily accessible.

• Keep this equipment away from humidity.

• Put this equipment on a reliable surface during installation. Dropping it or letting it fall

could cause damage.

• The openings on the enclosure are for air convection and to protect the equipment from

overheating.

• Before connecting the equipment to the power outlet make sure the voltage of the power

source is correct.

• Position the power cord so that people cannot step on it. Do not place anything over the

power cord.

• If the equipment is not used for a long time, disconnect it from the power source to avoid

damage by transient over-voltage.

• Never pour any liquid into an opening. This could cause fire or electrical shock.

• Never open the equipment. For safety reasons, only qualified service personnel should

open the equipment.

• All cautions and warnings on the equipment should be noted.

• Always ground yourself to remove any static charge before touching the board.

6 PT Series Display User Manual

About This User Manual

This User Manual provides information about using the Winmate® PT Series Display. The

documentation set provides information for specific user needs, and includes:

• PT Series Display User Manual – contains detailed description on how to use the

display, its components and features.

Note: Some pictures in this guide are samples and can differ from actual

product.

Document Revision History

Version Date Note

1.0 2-Mar-2020 New document release.

7 0BChapter 1: Introduction

Chapter 1: Introduction

This chapter gives you product overview, describes features and hardware

specification. You will find all accessories that come with the device in the packing list.

Mechanical dimensions and drawings included in this chapter.

8 PT Series Display User Manual

1.1 Overview

Congratulations on purchasing Winmate® PT Series Display. Versatile display in a chassis

standalone housing designed for wall and VESA mounting with integrated bracket design for

industrial and commercial applications.

1.2 Product Features

Winmate® PT Series Display features:

• 15”/ 15.6”/ 18.5”/ 32” TFT LCD

• 1 x HDMI, 1 x VGA

• USB for touch

• Chassis housing

• Supports VESA mount

• Suitable for industrial and commercial applications

1.3 Package Contents

Carefully remove the box and unpack your display. Please check if all the items listed below

are inside your package. If any of these items are missing or damaged contact us immediately.

Factory shipment list:

• Display

• User Manual (Hardcopy)

• 110~240V AC Power

Adapter

Varies by product

Part No. 91521110105R

Varies by product

• Power Cord

• VGA Cable

• HDMI Cable

Varies by country

Part No. 9441151150Q8

Part No. 94E0190190P3

• USB Cable for Touch

• RS232 Cable (Optional)

Part No. 948018102100

9 0BChapter 1: Introduction

1.4 Product Overview

This section describes physical appearance of the PT Series Display.

Note: Notice that standard input terminals include VGA and HDMI. Your device

may be equipped with DVI, S-Video or Composite input terminals based on your

order.

Note: All dimensions in the drawing below has tolerance ± 1 mm.

15”, R15L100-PTC3

Unit: mm

Dimensions: 352.5x 276.7 x 45

№ Description № Description

①

12V DC in

④

HDMI

②

Audio in

⑤

USB for Touch

③

VGA

10 PT Series Display User Manual

15.6”, W15L100-PTA3

Unit: mm

Dimensions:388 x 233 x 40

№ Description № Description

①

VGA

⑤

USB for Touch

②

HDMI

⑥

Power LED Indicator

③

Audio-in



7 key OSD Panel

④

12V DC in

18.5”, W18L100-PTA2 (HB)

Unit: mm

Dimensions: 467 x 305 x 35

11 0BChapter 1: Introduction

№ Description № Description

①

USB for Touch

④

12V DC (Power Jack)

②

VGA

⑤

5 Key OSD Buttons

③

HDMI

32”, W32L100-PTA2

Unit: mm

Dimensions:799 x 478 x 63.7

№ Description № Description

①

12V DC in

④

USB for Touch

②

VGA

⑤

RS-232 (Optional)

③

HDMI

1.5 Control Buttons and LED Indicators

Control Buttons and LED Indicators are located on the OSD control panel on the rear side of

the device. OSD Control Panel varies by product specifications.

Note:

The type of the OSD control panel varies by product. Please refer to your

product specifications for more details.

12 PT Series Display User Manual

Type A OSD control panel (7 Key)

Type B OSD control panel (5 Key)

Icon Function

Press to decrease the value / Select up.

Press to increase the value / Select down.

Press to power on or power off the device.

Press to Exit / Auto adjustment.

Press to Enter / Call main OSD menu.

Power LED- Lights up in "Green" when the monitor turns on.

Stand by - Lights up "Orange" when the device cannot detect any input

source.

Icon

Function

Press to ENTER.

Press to EXIT.

Press to move RIGHT in the navigation menu.

Press to move LEFT in the navigation menu.

Press to move UP in the navigation menu.

Press to move DOWN in the navigation menu.

Press to power on or power off the device.

13 0BChapter 1: Introduction

Type C OSD Control Panel (5 Key)

Icon

Function

Select left.

Select right / Call main OSD menu.

Decrease the value / Select up.

Increase the value / Select down.

Power switch.

14 PT Series Display User Manual

Chapter 2: Installation

This chapter provides hardware installation instructions and mounting guide for all

available mounting options. Pay attention to cautions and warning to avoid any

damages.

15 1BChapter 2: Installation

2.1 Wiring Requirements

The following common safety precautions should be observed before installing any electronic

device:

• Strive to use separate, non-intersecting paths to route power and networking wires. If

power wiring and device wiring paths must cross make sure the wires are perpendicular

at the intersection point.

• Keep the wires separated according to interface. The rule of thumb is that wiring that

shares similar electrical characteristics may be bundled together.

• Do not bundle input wiring with output wiring. Keep them separate.

• When necessary, it is strongly advised that you label wiring to all devices in the system.

• Do not run signal or communication wiring and power wiring in the same conduit. To

avoid interference, wires with different signal characteristics (i.e., different interfaces)

should be routed separately.

• Be sure to disconnect the power cord before installing and/or wiring your device.

• Verify the maximum possible current for each wire gauge, especially for the power cords.

Observe all electrical codes dictating the maximum current allowable for each wire

gauge.

• If the current goes above the maximum ratings, the wiring could overheat, causing

serious damage to your equipment.

Be careful when handling the unit. When the unit is plugged in, the internal components

generate a lot of heat which may leave the outer casing too hot to touch.

2.2 Mounting Guide

The PT Series Display can be applied for several different installation methods, including wall

mount, VESA mount. Refer to sub-sections below for more details.

Caution Follow mounting instructions and use recommended mounting

hardware to avoid the risk of injury.

Attention Suivez les instructions de montage et d'utilisation recommandé le

matériel de montage pour éviter le risque de blessure.

PT Series Display comes with VESA Mount holes for mounting. Winmate provides VESA

mounting kit by request.

VESE plate dimensions and screw size:

Size

VESA Plate

Screw Size

15” 75x75 mm, 100x100 mm M4, D=5

15.6” 75x75 mm, 100x100 mm M4, D=5

18.5” 75x75 mm, 100x100 mm M4, D=5

32” 200x200 mm, 200x100 mm M6, D=10

16 PT Series Display User Manual

VESA Mount Installation Instruction

1. Screw VESA bracket to the fixture (ex. desk stand) with four VESA screws.

2. Place the device on VESA bracket.

Notice: VESA stand and mounting kit are not provided by Winmate.

17 1BChapter 2: Installation

2.3 Cable Mounting Considerations

For a nice look and safe installation, make sure cables are neatly hidden behind the device.

Caution Observe all local installation requirements for connection cable type

and protection level.

Attention Suivre tous les règlements locaux d’installations, de câblage et

niveaux de protection.

Caution

Turn off the device and disconnect other peripherals before

installation.

Attention Éteindre l’appareil et débrancher tous les périphériques avant

l’installation.

2.4 Connecting Power

This section provides information on how to use connectors on the PT Series Display. Be

cautious while working with these modules. Please carefully read the content of this chapter in

order to avoid any damages.

Installation instruction:

1. Connect the AC cord to the AC IN terminal on the AC adaptor.

2. Connect the DC OUT terminal of the AC adaptor to the DC IN terminal on the monitor.

3. Align the notch on the cord connector with the guiding groove and plug it in.

4. Connect the AC cord plug to the power outlet.

18 PT Series Display User Manual

2.5 Connecting Peripherals

The panel control port is designed for monitors that work with a variety of compatible video

sources. Due to the possible deviations between these signal sources, you may have to make

adjustments to the monitor settings from the OSD menu when switching between these

sources.

Note: Notice that standard input terminals include VGA and HDMI.

Your device may be equipped with additional input terminals based on

your order.

Use VGA or HDMI cable to connect your display to external device.

19 1BChapter 2: Installation

2.6 Connector Description

2.6.1 VGA Connector

PT Series Display uses standard 15pin D-sub connector. Plug 15-pin VGA signal cable to the

VGA connector in the rear of motherboard, and plug the other end to the monitor. Secure cable

connectors with hexagonal copper pillars M3x4mm.

Pin assignment and signal names for VGA connector

2.6.2 HDMI Connector

PT Series Display uses standard HDMI connector. Plug HDMI signal cable to the HDMI

connector on the rear side of PC system, and plug the other end to the monitor.

Pin assignment and signal names for HDMI connector

2.6.3 USB for Touch

PT Series Display uses USB port for touch capabilities. Use USB cable to connect display to

touch.

Pin assignment and signal name of USB port for touch

Pin №

Signal Name

Pin №

Signal Name

1

RED

2

GREEN

3

BLUE

4

NC

5

GND

6

AGND

7

AGND

8

AGND

9

VGA_5V

10

GND

11

NC

12

DDCSDA

13

H Sync

14

V Sync

15

DDCSCL

Pin №

Signal Name

Pin №

Signal Name

1

HDMI_RX2+

2

GND

3

HDMI_RX2-

4

HDMI_RX1+

5

GND

6

HDMI_RX1-

7

HDMI_RX0+

8

GND

9

HDMI_RX0-

10

HDMI_RXC+

11

GND

12

HDMI_RXC-

13

HDMI_CON_CEC

14

NC

15

HDMI_CON_SCL

16

HDMI_CON_SDA

17

GND

18

+5V_HDMI

19

HDMI_CON_HP

Pin No.

Signal Name

Pin No.

Signal Name

1

+5V

2

Data-

3

Data+

4

GND

20 PT Series Display User Manual

2.6.4 RS-232 for Remote Control

Notice that RS-232 terminal for remote control is an optional connector of PT Series Display

and may not be present in your device.

Pin assignment and signal name of RS-232 terminal

2.7 Turning on the System

To turn on the system:

1. Connect the power adapter cable to the DC IN of the display.

2. Connect the power cord to the power adapter.

3. Connect the power cord to a power outlet.

4. Press the power button located on the OSD control panel on the rear to turn on the

system.

Pin No.

Signal Name

1

CD

NC (no connection)

2

RXD

Transmission data

3

TXD

Reception data

4

DTR

Data terminal ready

5

GND

6

DSR

Data set ready

7

RTS

Request to send

8

CTS

Short circuit at pin 7 on the

monitor

9

RI

NC (no connection)

La page est en cours de chargement...

Winmate W18L100-PTA2HB Manuel utilisateur

Ce manuel convient également à

Winmate W18L100-PTA2HB Manuel utilisateur

dans d''autres langues

Documents connexes