AEG IKE64473IB Manuel utilisateur

Marque: AEG

Modèle: IKE64473IB

Catégorie: Plaques de cuisson

Taper: Manuel utilisateur

USER

MANUAL

EN User Manual 2

Hob

DE Benutzerinformation 25

Kochfeld

FR Notice d'utilisation 50

Table de cuisson

IT Istruzioni per l’uso 75

Piano cottura

ES Manual de instrucciones 100

Placa de cocción

IKE64473IB

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable

performance for many years, with innovative technologies that help make life simpler –

features you might not find on ordinary appliances. Please spend a few minutes reading

to get the very best from it.

Visit our website to:

Get usage advice, brochures, trouble shooter, service and repair information:

www.aeg.com/support

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the following data

available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

CONTENTS

1. SAFETY INFORMATION................................................................................................ 2

2. SAFETY INSTRUCTIONS.............................................................................................. 4

3. INSTALLATION...............................................................................................................6

4. PRODUCT DESCRIPTION.............................................................................................9

5. DAILY USE....................................................................................................................11

6. FLEXIBLE INDUCTION COOKING AREA....................................................................15

7. HINTS AND TIPS..........................................................................................................18

8. CARE AND CLEANING................................................................................................ 20

9. TROUBLESHOOTING.................................................................................................. 21

10. TECHNICAL DATA..................................................................................................... 23

11. ENERGY EFFICIENCY...............................................................................................23

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully read

the supplied instructions. The manufacturer is not responsible

for any injuries or damage that are the result of incorrect

2 ENGLISH

installation or usage. Always keep the instructions in a safe

and accessible location for future reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

the use of the appliance in a safe way and understand the

hazards involved. Children of less than 8 years of age and

persons with very extensive and complex disabilities shall

be kept away from the appliance unless continuously

supervised.

• Do not let children play with the appliance.

• Keep all packaging away from children and dispose of it

appropriately.

• WARNING: Keep children and pets away from the

appliance when it operates or when it cools down.

Accessible parts become hot during use.

• If the appliance has a child safety device, it should be

activated.

• Children shall not carry out cleaning and user maintenance

of the appliance without supervision.

1.2 General Safety

• WARNING: The appliance and its accessible parts become

hot during use. Care should be taken to avoid touching

heating elements.

• WARNING: Unattended cooking on a hob with fat or oil can

be dangerous and may result in fire.

• NEVER try to extinguish a fire with water, but switch off the

appliance and then cover flame e.g. with a lid or a fire

blanket.

• CAUTION: The appliance must not be supplied through an

external switching device, such as a timer, or connected to

a circuit that is regularly switched on and off by a utility.

ENGLISH 3

• CAUTION: The cooking process has to be supervised. A

short term cooking process has to be supervised

continuously.

• WARNING: Danger of fire: Do not store items on the

cooking surfaces.

• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they can get

hot.

• Do not use the appliance before installing it in the built-in

structure.

• Do not use a steam cleaner to clean the appliance.

• After use, switch off the hob element by its control and do

not rely on the pan detector.

• If the glass ceramic surface / glass surface is cracked,

switch off the appliance and unplug it from the mains. In

case the appliance is connected to the mains directly using

junction box, remove the fuse to disconnect the appliance

from power supply. In either case contact the Authorised

Service Centre.

• If the supply cord is damaged, it must be replaced by the

manufacturer, an authorized Service or similarly qualified

persons in order to avoid a hazard.

• WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by the

manufacturer of the appliance in the instructions for use as

suitable or hob guards incorporated in the appliance. The

use of inappropriate guards can cause accidents.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

WARNING!

Risk of injury or damage to the

appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instructions

supplied with the appliance.

• Keep the minimum distance from other

appliances and units.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Seal the cut surfaces with a sealant to

prevent moisture from causing swelling.

4 ENGLISH

• Protect the bottom of the appliance from

steam and moisture.

• Do not install the appliance next to a door

or under a window. This prevents hot

cookware from falling from the appliance

when the door or the window is opened.

• Each appliance has cooling fans on the

bottom.

• If the appliance is installed above a

drawer:

– Do not store any small pieces or

sheets of paper that could be pulled

in, as they can damage the cooling

fans or impair the cooling system.

– Keep a distance of minimum 2 cm

between the bottom of the appliance

and parts stored in the drawer.

• Remove any separator panels installed in

the cabinet below the appliance.

2.2 Electrical Connection

WARNING!

Risk of fire and electric shock.

• All electrical connections should be made

by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make

sure that the appliance is disconnected

from the power supply.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Make sure the appliance is installed

correctly. Loose and incorrect electricity

mains cable or plug (if applicable) can

make the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable

tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near sockets.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug (if applicable) or to the mains

cable. Contact our Authorised Service

Centre or an electrician to change a

damaged mains cable.

• The shock protection of live and insulated

parts must be fastened in such a way that

it cannot be removed without tools.

• Connect the mains plug to the mains

socket only at the end of the installation.

Make sure that there is access to the

mains plug after the installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have an

isolation device which lets you disconnect

the appliance from the mains at all poles.

The isolation device must have a contact

opening width of minimum 3 mm.

2.3 Use

WARNING!

Risk of injury, burns and electric

shock.

• Remove all the packaging, labelling and

protective film (if applicable) before first

use.

• This appliance is for household use only.

• Do not change the specification of this

appliance.

• Make sure that the ventilation openings

are not blocked.

• Do not let the appliance stay unattended

during operation.

• Set the cooking zone to “off” after each

use.

• Do not rely on the pan detector.

• Do not put cutlery or saucepan lids on the

cooking zones. They can become hot.

• Do not operate the appliance with wet

hands or when it has contact with water.

• Do not use the appliance as a work

surface or as a storage surface.

• If the surface of the appliance is cracked,

disconnect immediately the appliance

from the power supply. This to prevent an

electrical shock.

• Users with a pacemaker must keep a

distance of minimum 30 cm from the

ENGLISH 5

induction cooking zones when the

appliance is in operation.

• When you place food into hot oil, it may

splash.

WARNING!

Risk of fire and explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or

heated objects away from fats and oils

when you cook with them.

• The vapours that very hot oil releases can

cause spontaneous combustion.

• Used oil, that can contain food remnants,

can cause fire at a lower temperature than

oil used for the first time.

• Do not put flammable products or items

that are wet with flammable products in,

near or on the appliance.

WARNING!

Risk of damage to the appliance.

• Do not keep hot cookware on the control

panel.

• Do not put a hot pan cover on the glass

surface of the hob.

• Do not let cookware boil dry.

• Be careful not to let objects or cookware

fall on the appliance. The surface can be

damaged.

• Do not activate the cooking zones with

empty cookware or without cookware.

• Do not put aluminium foil on the

appliance.

• Cookware made of cast iron, aluminium or

with a damaged bottom can cause

scratches on the glass / glass ceramic.

Always lift these objects up when you

have to move them on the cooking

surface.

• This appliance is for cooking purposes

only. It must not be used for other

purposes, for example room heating.

2.4 Care and cleaning

• Clean the appliance regularly to prevent

the deterioration of the surface material.

• Switch off the appliance and let it cool

down before cleaning.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Use only neutral detergents. Do not

use abrasive products, abrasive cleaning

pads, solvents or metal objects.

2.5 Service

• To repair the appliance contact the

Authorised Service Centre. Use original

spare parts only.

• Concerning the lamp(s) inside this product

and spare part lamps sold separately:

These lamps are intended to withstand

extreme physical conditions in household

appliances, such as temperature,

vibration, humidity, or are intended to

signal information about the operational

status of the appliance. They are not

intended to be used in other applications

and are not suitable for household room

illumination.

2.6 Disposal

WARNING!

Risk of injury or suffocation.

• Contact your municipal authority for

information on how to discard the

appliance correctly.

• Disconnect the appliance from the mains

supply.

• Cut off the mains electrical cable close to

the appliance and dispose of it.

3. INSTALLATION

WARNING!

Refer to Safety chapters.

3.1 Before the installation

Before you install the hob, write down the

information below from the rating plate. The

rating plate is on the bottom of the hob.

Serial number ...........................

6 ENGLISH

3.2 Built-in hobs

Only use the built-in hobs after you assemble

the hob into correct built-in units and work

surfaces that align to the standards.

3.3 Connection cable

• The hob is supplied with a connection

cable.

• To replace the damaged mains cable, use

the cable type: H05V2V2-F which

withstands a temperature of 90 °C or

higher. Speak to your local Service

Centre. The connection cable may only be

replaced by a qualified electrician.

WARNING!

All electrical connections must

be made by a qualified

electrician.

CAUTION!

Do not drill or solder the wire

ends. It is forbidden.

CAUTION!

Do not connect the cable without

cable end sleeve.

Two-phase connection

1. Remove the cable end sleeve from black

and brown wires.

2. Remove an insulation of the brown and

black cable ends.

3. Apply a new wire end sleeve of 1.5 mm²

on common cable end (special tool

required).

Cable cross section

230V~ 400V 2~N

One-phase connection - 230 V~ Two-phase connection - 400 V 2 ~ N

Green - yellow Green - yellow

N Blue and blue Blue and blue N

L Black and brown Black L1

Brown L2

3.4 Attaching the seal - Integrated

installation

1. Clean the rabbets in the worktop.

2. Cut the supplied 3x10mm seal stripe into

4 stripes. The stripes must have the

same length as the rabbets.

3. Cut the ends of the stripes at an angle of

45°. They should fit in the corners of the

rabbets accurately.

4. Attach the stripes to the rabbets. Do not

stretch the stripes. Do not bond the ends

of the stripes one over the other.

After you assemble the hob, seal the

remaining gap between the glass ceramic

and the worktop with silicone. Make sure the

silicone does not get under the glass

ceramic.

3.5 Attaching the seal - On-top

installation

1. Clean the worktop around the cut out

area.

2. Attach the supplied 2x6mm seal stripe to

the lower edge of the hob, along the

outer edge of the glass ceramic. Do not

stretch it. Make sure that the ends of the

seal stripe are located in the middle of

one side of the hob.

3. Add some millimetres to the length when

you cut the seal stripe.

ENGLISH 7

4. Join the two ends of the seal stripe

together.

3.6 Assembly

If you install the hob under a hood, please

see the installation instructions of the hood

for the minimum distance between the

appliances.

min.

50mm

min.

500mm

If the appliance is installed above a drawer,

the hob ventilation can warm up the items

stored in the drawer during the cooking

process.

ON-TOP INSTALLATION

580

510

INTEGRATED INSTALLATION

min.

28 mm

www.youtube.com/electrolux

www.youtube.com/aeg

How to install your AEG

Induction Hob - Worktop installation

www.youtube.com/electrolux

www.youtube.com/aeg

How to install your AEG induction hob

flush installation

8 ENGLISH

4. PRODUCT DESCRIPTION

4.1 Cooking surface layout

Induction cooking zone

Control panel

Flexible induction cooking area

consisting of four sections

4.2 Control panel layout

1 2 3

12 1113 10

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which

functions operate.

Sensor

field

Function Comment

ON / OFF To activate and deactivate the hob.

Lock / Child Safety Device To lock / unlock the control panel.

PowerSlide To activate and deactivate the function.

FlexiBridge To switch between three modes of the function.

- Heat setting display To show the heat setting.

- Timer indicators of cooking zones To show for which zone you set the time.

- Timer display To show the time in minutes.

Hob²Hood To activate and deactivate the manual mode of the func‐

tion.

ENGLISH 9

Sensor

field

Function Comment

PowerBoost To activate and deactivate the function.

- Control bar To set a heat setting.

- To select the cooking zone.

- To increase or decrease the time.

- Control bar To set the heat setting for flexible induction cooking

area.

4.3 Heat setting displays

Display Description

The cooking zone is deactivated.

The cooking zone operates.

Automatic Heat Up operates.

PowerBoost operates.

+ digit

There is a malfunction.

/ /

OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / resid‐

ual heat.

Lock / Child Safety Device operates.

Incorrect or too small cookware or no cookware on the cooking zone.

Automatic Switch Off operates.

/ /

PowerSlide operates.

4.4 OptiHeat Control (3 step

Residual heat indicator)

WARNING!

/ / As long as the

indicator is on, there is a risk of

burns from residual heat.

The induction cooking zones produce the

heat necessary for the cooking process

directly in the bottom of the cookware. The

glass ceramic is heated by the heat of the

cookware.

The indicators / / appear when a

cooking zone is hot. They show the level of

the residual heat for the cooking zones you

are currently using.

The indicator may also appear:

• for the neighbouring cooking zones even

if you are not using them,

• when hot cookware is placed on cold

cooking zone,

• when the hob is deactivated but the

cooking zone is still hot.

The indicator disappears when the cooking

zone has cooled down.

10 ENGLISH

5. DAILY USE

WARNING!

Refer to Safety chapters.

5.1 Activating and deactivating

Touch for 1 second to activate or

deactivate the hob.

5.2 Automatic Switch Off

The function deactivates the hob

automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after you

activate the hob,

• you spill something or put something on

the control panel for more than 10

seconds (a pan, a cloth, etc.). An acoustic

signal sounds and the hob deactivates.

Remove the object or clean the control

panel.

• the hob gets too hot (e.g. when a

saucepan boils dry). Let the cooking zone

cool down before you use the hob again.

• you use incorrect cookware. The symbol

comes on and the cooking zone

deactivates automatically after 2 minutes.

• you do not deactivate a cooking zone or

change the heat setting. After some time

comes on and the hob deactivates.

The relation between the heat setting and

the time after which the hob deactivates:

Heat setting The hob deactivates

after

, 1 - 3

6 hours

4 - 7 5 hours

8 - 9 4 hours

10 - 14 1.5 hour

5.3 The heat setting

To set or change the heat setting:

Touch the control bar at the correct heat

setting or move your finger along the control

bar until you reach the correct heat setting.

5.4 Using the cooking zones

Place the cookware in the centre of the

selected zone. Induction cooking zones

adapt to the dimension of the bottom of the

cookware automatically.

5.5 Automatic Heat Up

Activate this function to get a desired heat

setting in a shorter time. When it is on, the

zone operates on the highest setting in the

beginning and then continues to cook at the

desired heating setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch ( comes on). Immediately

touch a desired heat setting. After 3 seconds

comes on.

To deactivate the function: change the

heat setting.

5.6 PowerBoost

This function makes more power available to

the induction cooking zones. The function

can be activated for the induction cooking

zone only for a limited period of time. After

this time the induction cooking zone

automatically sets back to the highest heat

setting.

Refer to “Technical data”

chapter.

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: change the

heat setting.

5.7 Timer

• Count Down Timer

ENGLISH 11

You can use this function to set the length of

a single cooking session.

First set the heat setting for the cooking

zone, then set the function.

To set the cooking zone: touch

repeatedly until the indicator of a cooking

zone appears.

To activate the function: touch

of the

timer to set the time (00 - 99 minutes). When

the indicator of the cooking zone starts to

flash, the time counts down.

To see the remaining time: touch to set

the cooking zone. The indicator of the

cooking zone starts to flash. The display

shows the remaining time.

To change the time: touch to set the

cooking zone. Touch

or .

To deactivate the function: touch to set

the cooking zone and then touch . The

remaining time counts down to 00. The

indicator of the cooking zone disappears.

When the countdown ends, an

acoustic signal sounds and 00

flashes. The cooking zone

deactivates.

To stop the sound: touch .

• CountUp Timer

You can use this function to monitor how

long the cooking zone operates.

To set the cooking zone: touch

repeatedly until the indicator of a cooking

zone appears.

To activate the function: touch of the

timer. appears. When the indicator of the

cooking zone starts to flash, the time counts

up. The display switches between and the

counted time (in minutes).

To see how long the cooking zone

operates: touch to set the cooking zone.

The indicator of the cooking zone starts to

flash. The display shows how long the zone

operates.

To deactivate the function: touch and

then touch or . The indicator of the

cooking zone disappears.

• Minute Minder

You can use this function when the hob is

activated and the cooking zones do not

operate. The heat setting display shows

To activate the function: touch and then

touch or of the timer to set the time.

When the time finishes, an acoustic signal

sounds and 00 flashes.

To stop the sound: touch

The function has no effect on the

operation of the cooking zones.

5.8 Lock

You can lock the control panel while cooking

zones operate. It prevents an accidental

change of the heat setting.

Set the heat setting first.

To activate the function: touch .

comes on for 4 seconds. The Timer stays on.

To deactivate the function: touch . The

previous heat setting comes on.

When you deactivate the hob,

you also deactivate this function.

5.9 Child Safety Device

This function prevents an accidental

operation of the hob.

To activate the function: activate the hob

with . Do not set any heat setting. Touch

for 4 seconds. comes on. Deactivate

the hob with .

To deactivate the function: activate the hob

with . Do not set any heat setting. Touch

for 4 seconds. comes on. Deactivate

the hob with .

To override the function for only one

cooking time: activate the hob with .

comes on. Touch for 4 seconds. Set the

heat setting in 10 seconds. You can

12 ENGLISH

operate the hob. When you deactivate the

hob with the function operates again.

5.10 OffSound Control

(Deactivating and activating the

sounds)

Deactivate the hob. Touch for 3 seconds.

The display comes on and goes out. Touch

for 3 seconds. or comes on. Touch

of the timer to choose one of the

following:

• - the sounds are off

• - the sounds are on

To confirm your selection wait until the hob

deactivates automatically.

When the function is set to

you can hear

the sounds only when:

• you touch

• Minute Minder comes down

• Count Down Timer comes down

• you put something on the control panel.

5.11 Power limitation

The hob is set to its highest possible power

level by default.

To decrease or increase the power level:

1. Deactivate the hob.

2. Press and hold

for 3 seconds. The

display flashes.

3. Press and hold for 3 seconds. or

appears.

4. Press . P72 appears.

5. Press / of the timer to set the

power level.

Power levels

Refer to “Technical data” chapter.

CAUTION!

Make sure that the selected

power fits the house installation

fuses.

• P72 — 7200 W

• P15 — 1500 W

• P20 — 2000 W

• P25 — 2500 W

• P30 — 3000 W

• P35 — 3500 W

• P40 — 4000 W

• P45 — 4500 W

• P50 — 5000 W

• P60 — 6000 W

5.12 Power management

If multiple zones are active and the

consumed power exceeds the limitation of

the power supply, this function divides the

available power between all cooking zones.

The hob controls heat settings to protect the

fuses of the house installation.

• Cooking zones are grouped according to

the location and number of the phases in

the hob. Each phase has a maximum

electricity loading (3700 W). If the hob

reaches the limit of maximum available

power within one phase, the power of the

cooking zones will be automatically

reduced.

• The heat setting of the cooking zone

selected last is always prioritised. The

remaining power will be divided between

the previously activated cooking zones in

reverse order of selection.

• The heat setting display of the reduced

zones changes between the initially

selected heat setting and the reduced

heat setting.

• Wait until the display stops flashing or

reduce the heat setting of the cooking

zone selected last. The cooking zones will

continue operating with the reduced heat

setting. Change the heat settings of the

cooking zones manually, if necessary.

Power management with Power limitation

When you set the Power limitation function to

6000 W or less, the power of the hob is

divided among all cooking zones.

Refer to the illustration for possible

combinations in which power can be

distributed among the cooking zones.

ENGLISH 13

When you set the Power limitation function to

more than 6000 W, the power of the hob is

divided between its left and right side.

5.13 Hob²Hood

It is an advanced automatic function which

connects the hob to a special hood. Both the

hob and the hood have an infrared signal

communicator. Speed of the fan is defined

automatically on basis of mode setting and

temperature of the hottest cookware on the

hob. You can also operate the fan from the

hob manually.

For most of the hoods the

remote system is originally

deactivated. Activate it before

you use the function. For more

information refer to hood user

manual.

Operating the function automatically

To operate the function automatically set the

automatic mode to H1 – H6. The hob is

originally set to H5. The hood reacts

whenever you operate the hob. The hob

recognizes temperature of the cookware

automatically and adjusts the speed of the

fan.

Automatic modes

Automat‐

ic light

Boiling

Frying

Mode H0 Off Off Off

Mode H1 On Off Off

Mode

On Fan speed

Fan speed

Mode H3 On Off Fan speed

Mode H4 On Fan speed

Fan speed

Mode H5 On Fan speed

Fan speed

Mode H6 On Fan speed

Fan speed

The hob detects the boiling process and acti‐

vates fan speed in accordance with automatic

mode.

The hob detects the frying process and acti‐

vates fan speed in accordance with automatic

mode.

This mode activates the fan and the light and

does not rely on the temperature.

Changing the automatic mode

1. Deactivate the appliance.

2. Touch

for 3 seconds. The display

comes on and goes off.

3. Touch for 3 seconds.

4. Touch a few times until comes on.

5. Touch of the Timer to select an

automatic mode.

To operate the hood directly on

the hood panel deactivate the

automatic mode of the function.

When you finish cooking and

deactivate the hob, the hood fan

may still operate for a certain

period of time. After that time the

system deactivates the fan

automatically and prevents you

from accidental activation of the

fan for the next 30 seconds.

Operating the fan speed manually

You can also operate the function manually.

To do that touch when the hob is active.

14 ENGLISH

This deactivates automatic operation of the

function and allows you to change the fan

speed manually. When you press you

raise the fan speed by one. When you reach

an intensive level and press again you will

set fan speed to 0 which deactivates the

hood fan. To start the fan again with fan

speed 1 touch

To activate automatic operation

of the function, deactivate the

hob and activate it again.

Activating the light

You can set the hob to activate the light

automatically whenever you activate the hob.

To do so set the automatic mode to H1 – H6.

The light on the hood

deactivates 2 minutes after

deactivating the hob.

6. FLEXIBLE INDUCTION COOKING AREA

WARNING!

Refer to Safety chapters.

6.1 FlexiBridge function

The flexible induction cooking area consists

of four sections. The sections can be

combined into two cooking zones with

different size, or into one large cooking area.

You choose the combination of the sections

by choosing the mode applicable to the size

of the cookware you want to use. There are

three modes: Standard (activated

automatically when you activate the hob), Big

Bridge and Max Bridge.

To set the heat setting use two

left side control bars.

Switching between the modes

To switch between the modes use sensor

field:

When you switch between the

modes the heat setting is set

back to 0.

Diameter and position of the cookware

Choose the mode applicable to the size and

the shape of the cookware. The cookware

should cover the selected area as much as

possible. Place the cookware centrally on the

selected area!

Place the cookware with the bottom diameter

smaller than 160 mm centrally on a single

section.

100-160mm

Place the cookware with the bottom diameter

larger then 160 mm centrally between two

sections.

ENGLISH 15

> 160 mm

6.2 FlexiBridge Standard mode

This mode is active when you activate the

hob. It connects the sections into two

separate cooking zones. You can set the

heat setting for each zone separately. Use

two left side control bars.

Correct cookware position:

Incorrect cookware position:

6.3 FlexiBridge Big Bridge mode

To activate the mode touch until you see

the correct mode indicator . This mode

connects three rear sections into one cooking

zone. The front section is not connected and

operates as a separate cooking zone. You

can set the heat setting for each zone

separately. Use two left side control bars.

Correct cookware position:

To use this mode you have to place the

cookware on the three connected sections. If

you use cookware smaller than two sections

the display shows and after 2 minutes the

zone switches off.

Incorrect cookware position:

16 ENGLISH

6.4 FlexiBridge Max Bridge mode

To activate the mode touch until you see

the correct mode indicator . This mode

connects all sections into one cooking zone.

To set the heat setting use any of the two

control bars on the left side.

Correct cookware position:

To use this mode you have to place the

cookware on the four connected sections. If

you use cookware smaller than three

sections the display shows and after 2

minutes the zone switches off.

Incorrect cookware position:

6.5 PowerSlide

This function allows you to adjust the

temperature by moving the cookware to a

different position on the induction cooking

area.

The function divides the induction cooking

area into three areas with different heat

settings. The hob detects the position of the

cookware and adjust the heat setting

corresponding with the position. You can

place the cookware in the front, middle or

rear position. If you place the cookware in the

front you get the highest heat setting. To

decrease it, move the cookware to middle or

rear position.

Use only one pot when you

operate the function.

General information:

• 160 mm is the minimum bottom diameter

of the cookware for this function.

• Heat setting display for the left rear

control bar shows the position of the

cookware on the induction cooking area.

ENGLISH 17

Front , middle , rear .

• Heat setting display for the left front

control bar shows the heat setting. To

change the heat setting use left front

control bar.

• When you activate the function for the first

time you will get heat setting

for the

front position, for the middle position

and for the rear position.

You can change the heat settings for each

position separately. The hob will

remember your heat settings next time

you activate the function.

Activating the function

To activate the function place the cookware

in the correct position on the cooking area.

Touch . The indicator above the symbol

comes on. If you do not place the cookware

on the cooking area comes on and after 2

minutes the flexible induction cooking area is

set to

Deactivating the function

To deactivate the function touch or set the

heat setting to . The indicator above the

symbol

goes off.

7. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

7.1 Cookware

For induction cooking zones a

strong electro-magnetic field

creates the heat in the cookware

very quickly.

Use the induction cooking zones with

suitable cookware.

• The bottom of the cookware must be as

thick and flat as possible.

• Ensure pan bases are clean and dry

before placing on the hob surface.

• In order to avoid scratches, do not slide or

rub the pot across the ceramic glass.

Cookware material

• correct: cast iron, steel, enamelled steel,

stainless steel, multi-layer bottom (with a

correct marking from a manufacturer).

• not correct: aluminium, copper, brass,

glass, ceramic, porcelain.

Cookware is suitable for an induction hob

if:

• water boils very quickly on a zone set to

the highest heat setting.

• a magnet pulls on to the bottom of the

cookware.

Cookware dimensions

• Induction cooking zones adapt to the

dimension of the bottom of the cookware

automatically.

• The cooking zone efficiency is related to

the diameter of the cookware. The

18 ENGLISH

cookware with a diameter smaller than the

minimum receives only a part of the

power generated by the cooking zone.

• For both safety reasons and optimal

cooking results, do not use cookware

larger than indicated in "Cooking zones

specification". Avoid keeping cookware

close to the control panel during the

cooking session. This might impact the

functioning of the control panel or

accidentally activate hob functions.

Refer to "Technical data".

7.2 The noises during operation

If you can hear:

• crack noise: cookware is made of different

materials (a sandwich construction).

• whistle sound: you use a cooking zone

with a high power level and the cookware

is made of different materials (a sandwich

construction).

• humming: you use a high power level.

• clicking: electric switching occurs.

• hissing, buzzing: the fan operates.

The noises are normal and do not indicate

any malfunction.

7.3 Öko Timer (Eco Timer)

To save energy, the heater of the cooking

zone deactivates before the count down

timer sounds. The difference in the operation

time depends on the heat setting level and

the length of the cooking operation.

7.4 Examples of cooking

applications

The correlation between the heat setting of a

zone and its consumption of power is not

linear. When you increase the heat setting, it

is not proportional to the increase of the

consumption of power. It means that a

cooking zone with the medium heat setting

uses less than a half of its power.

The data in the table is for

guidance only.

Heat setting Use to: Time

(min)

Hints

- 1

Keep cooked food warm. as neces‐

sary

Put a lid on the cookware.

1 - 3 Hollandaise sauce, melt: butter, choco‐

late, gelatine.

5 - 25 Mix from time to time.

1 - 3 Solidify: fluffy omelettes, baked eggs. 10 - 40 Cook with a lid on.

3 - 5 Simmer rice and milkbased dishes,

heat up ready-cooked meals.

25 - 50 Add at least twice as much liquid as

rice, mix milk dishes halfway through

the procedure.

5 - 7 Steam vegetables, fish, meat. 20 - 45 Add a couple of tablespoons of liquid.

7 - 9 Steam potatoes. 20 - 60 Use max. ¼ l of water for 750 g of po‐

tatoes.

7 - 9 Cook larger quantities of food, stews

and soups.

60 - 150 Up to 3 l of liquid plus ingredients.

9 - 12 Gentle fry: escalope, veal cordon bleu,

cutlets, rissoles, sausages, liver, roux,

eggs, pancakes, doughnuts.

as neces‐

sary

Turn halfway through.

12 - 13 Heavy fry, hash browns, loin steaks,

steaks.

5 - 15 Turn halfway through.

14 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

Boil large quantities of water. PowerBoost is activated.

ENGLISH 19

7.5 Hints and Tips for Hob²Hood

When you operate the hob with the function:

• Protect the hood panel from direct

sunlight.

• Do not spot halogen light on the hood

panel.

• Do not cover the hob control panel.

• Do not interrupt the signal between the

hob and the hood (e.g. with the hand, a

cookware handle or a tall pot). See the

picture.

The hood in the picture is only exemplary.

Other remotely controlled

appliances may block the signal.

Do not use any such appliances

near to the hob while Hob²Hood

is on.

Cooker hoods with the Hob²Hood function

To find the full range of cooker hoods which

work with this function refer to our consumer

website. The AEG cooker hoods that work

with this function must have the symbol

8. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

8.1 General information

• Clean the hob after each use.

• Always use cookware with a clean base.

• Scratches or dark stains on the surface

have no effect on how the hob operates.

• Use a special cleaner suitable for the

surface of the hob.

• Use a special scraper for the glass.

The printing on the flexible

induction cooking area may

become dirty or change its

colour from sliding the cookware.

You can clean the area in a

standard way.

8.2 Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar,

otherwise, the dirt can cause damage to

the hob. Take care to avoid burns. Use a

special hob scraper on the glass surface

at an acute angle and move the blade on

the surface.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat

stains, shiny metallic discoloration. Clean

the hob with a moist cloth and a non-

abrasive detergent. After cleaning, wipe

the hob dry with a soft cloth.

• Remove shiny metallic discoloration:

use a solution of water with vinegar and

clean the glass surface with a cloth.

20 ENGLISH

La page charge ...

AEG IKE64473IB Manuel utilisateur

Marque: AEG

Modèle: IKE64473IB

Catégorie: Plaques de cuisson

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

italiano: AEG IKE64473IB Manuale utente
English: AEG IKE64473IB User manual
español: AEG IKE64473IB Manual de usuario
Deutsch: AEG IKE64473IB Benutzerhandbuch

AEG IKE64473IB Manuel utilisateur

AEG IKE64473IB Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents