VTech VG104-11 Manuel utilisateur

Marque: VTech

Modèle: VG104-11

Catégorie: Téléphones

Taper: Manuel utilisateur

Ce manuel convient également à

User’s manual

CS6324 VG104

CS6324-2 VG104-2

CS6324-3 VG104-3

CS6324-11 VG104-11

CS6324-21 VG104-21

CS6324-31 VG104-31

DECT 6.0 cordless telephone

Go to www.vtechphones.com (US) to

warranty support and the latest VTech

product news.

Go to phones.vtechcanada.com

(Canada) for the latest VTech product

news.

For support information

US CAN

Congratulations

on purchasing your new VTech product.

Before using this telephone, please read

Important safety instructions.

This manual has all the feature operations

and troubleshooting necessary to install

and operate your new VTech telephone.

Please review this manual thoroughly to

ensure proper installation and operation

of this innovative and feature rich VTech

product.

For support, shopping, and everything

new at VTech, visit our website at

www.vtechphones.com. In Canada, please

visit phones.vtechcanada.com.

Compatible with

Hearing Aid T-Coil

TIA-1083

Telephones identiﬁed with

this logo have reduced noise

and interference when used

with most T-coil equipped

hearing aids and cochlear

implants. The TIA-1083

Compliant Logo is a trademark

of the Telecommunications

Industry Association. Used

under license.

Important safety instructions

When using your telephone equipment,

basic safety precautions should always be

followed to reduce the risk of ﬁre, electric

shock and injury, including the following:

1. Read and understand all instructions.

2. Follow all warnings and instructions

marked on the product.

3. Unplug this product from the wall

outlet before cleaning. Do not use

liquid or aerosol cleaners. Use a damp

cloth for cleaning.

4. CAUTION: Do not install the telephone

base at a height above 2 meters.

5. Do not use this product near water

such as near a bath tub, wash

bowl, kitchen sink, laundry tub or a

swimming pool, or in a wet basement

or shower.

6. Do not place this product on an

unstable table, shelf, stand or other

unstable surfaces.

7. Avoid placing the telephone system

in places with extreme temperature,

direct sunlight, or other electrical

devices. Protect your phone from

moisture, dust, corrosive liquids and

fumes.

8. Slots and openings in the back or

bottom of the telephone base and

handset are provided for ventilation.

To protect them from overheating,

these openings must not be blocked

by placing the product on a soft

surface such as a bed, sofa or rug. This

product should never be placed near

or over a radiator or heat register. This

product should not be placed in any

area where proper ventilation is not

provided.

9. This product should be operated

only from the type of power source

indicated on the marking label. If you

are not sure of the type of power

supply in your home or ofﬁce, consult

your dealer or local power company.

10. Do not allow anything to rest on the

power cord. Do not install this product

where the cord may be walked on.

11. Never push objects of any kind into

this product through the slots in the

telephone base or handset because

they may touch dangerous voltage

points or create a short circuit. Never

spill liquid of any kind on the product.

12. To reduce the risk of electric shock,

do not disassemble this product, but

take it to an authorized service facility.

Opening or removing parts of the

telephone base or handset other than

speciﬁed access doors may expose

you to dangerous voltages or other

risks. Incorrect reassembling can cause

electric shock when the product is

subsequently used.

13. Do not overload wall outlets and

extension cords.

14. Unplug this product from the wall

outlet and refer servicing to an

authorized service facility under the

following conditions:

• When the power supply cord or

plug is damaged or frayed.

• If liquid has been spilled onto the

product.

• If the product has been exposed to

rain or water.

• If the product does not operate

normally by following the operating

instructions. Adjust only those

controls that are covered by the

operation instructions. Improper

adjustment of other controls may

result in damage and often requires

extensive work by an authorized

technician to restore the product to

normal operation.

• If the product has been dropped

and the telephone base and/or

handset has been damaged.

• If the product exhibits a distinct

change in performance.

15. Avoid using a telephone (other than

cordless) during an electrical storm.

There is a remote risk of electric shock

from lightning.

16. Do not use the telephone to report

a gas leak in the vicinity of the leak.

Under certain circumstances, a spark

may be created when the adapter

is plugged into the power outlet,

or when the handset is replaced in

its cradle. This is a common event

associated with the closing of any

electrical circuit. The user should

not plug the phone into a power

outlet, and should not put a charged

handset into the cradle, if the phone is

located in an environment containing

concentrations of ﬂammable or

ﬂame-supporting gases, unless there

is adequate ventilation. A spark in

such an environment could create a

ﬁre or explosion. Such environments

might include: medical use of oxygen

without adequate ventilation; industrial

gases (cleaning solvents; gasoline

vapors; etc.); a leak of natural gas; etc.

17. Only put the handset of your

telephone next to your ear when it is in

normal talk mode.

18. The power adapter is intended to be

correctly oriented in a vertical or ﬂoor

mount position. The prongs are not

designed to hold the plug in place if

it is plugged into a ceiling, under-the-

table or cabinet outlet.

19. For pluggable equipment, the

socket outlet shall be installed near

the equipment and shall be easily

accessible.

20. Use only the batteries

indicated in this manual. There may

be a risk of explosion if a wrong type

of battery is used for the handset.

Use only the supplied rechargeable

batteries or replacement batteries

(BT162342/BT262342) for the handset.

Do not dispose of batteries in a ﬁre.

They may explode.

• Do not use the battery in following

conditions:

» High or low extreme temperature

during use, storage or

transportation.

» Replacement of a battery with an

incorrect type that can defeat a

safeguard.

» Disposal of a battery into ﬁre or a

hot oven, or mechanically crushing

or cutting of a battery, that can

result in an explosion.

» Leaving a batteryin an extremely

high temperature surrounding

environment that can result in

an explosion or the leakage of

ﬂammable liquid or gas.

» A battery subjected to extremely

low air pressure that can result in

an explosion or the leakage of

ﬂammable liquid or gas.

21. Use only the adapter included with

this product. Incorrect adapter polarity

or voltage can seriously damage the

product.

SAVE THESE INSTRUCTIONS

Battery

• Use only the batteries provided or

equivalent. To order a replacement, visit

our website at www.vtechphones.com

or call 1 (800) 595-9511. In Canada, go

to phones.vtechcanada.com or call

1 (800) 267-7377.

• Do not dispose of the battery in a ﬁre.

Check with local waste management

codes for special disposal instructions.

• Do not open or mutilate the battery.

Released electrolyte is corrosive and

may cause burns or injury to the eyes

or skin. The electrolyte may be toxic if

swallowed.

• Exercise care in handling batteries in

order not to create a short circuit with

conductive materials.

• Charge the battery provided with this

product only in accordance with the

instructions and limitations speciﬁed in

this manual.

Precautions for users of implanted

cardiac pacemakers

Cardiac pacemakers (applies only to digital

cordless telephones):

Wireless Technology Research, LLC

(WTR), an independent research entity,

led a multidisciplinary evaluation of the

interference between portable wireless

telephones and implanted cardiac

pacemakers. Supported by the U.S.

Food and Drug Administration, WTR

recommends to physicians that:

Pacemaker patients

• Should keep wireless telephones at least

six inches from the pacemaker.

• Should NOT place wireless telephones

directly over the pacemaker, such as in a

breast pocket, when it is turned ON.

• Should use the wireless telephone at the

ear opposite the pacemaker.

WTR’s evaluation did not identify any risk

to bystanders with pacemakers from other

persons using wireless telephones.

About cordless telephones

• Privacy: The same features that make a

cordless telephone convenient create

some limitations. Telephone calls are

transmitted between the telephone

base and the cordless handset by radio

waves, so there is a possibility that

the cordless telephone conversations

could be intercepted by radio receiving

equipment within range of the

cordless handset. For this reason, you

should not think of cordless telephone

conversations as being as private as

those on corded telephones.

• Electrical power: The telephone base

of this cordless telephone must be

connected to a working electrical outlet.

The electrical outlet should not be

controlled by a wall switch. Calls cannot

be made from the cordless handset

if the telephone base is unplugged,

switched off or if the electrical power is

interrupted.

• Potential TV interference: Some

cordless telephones operate at

frequencies that may cause interference

to televisions and VCRs. To minimize or

prevent such interference, do not place

the telephone base of the cordless

telephone near or on top of a TV or

VCR. If interference is experienced,

moving the cordless telephone farther

away from the TV or VCR often reduces

or eliminates the interference.

• Rechargeable batteries: Exercise care in

handling batteries in order not to create

a short circuit with conducting material

such as rings, bracelets and keys. The

battery or conductor may overheat and

cause harm. Observe proper polarity

between the battery and the battery

charger.

• Nickel-metal hydride rechargeable

batteries: Dispose of these batteries in

a safe manner. Do not burn or puncture

the battery. Like other batteries of this

type, if burned or punctured, they

could release caustic material which

could cause injury.

Table of contents

Important safety instructions ..........................II

What’s in the box ............................................ 1

Overview ........................................................ 2

Telephone base overview ...................................2

Handset overview .................................................2

Charger overview .................................................3

Display icons overview.........................................3

Telephone base lights overview ........................3

Connect ...........................................................4

Connect the telephone base ............................. 4

Connect the charger ............................................ 4

Mount the telephone base ................................ 4

Install and charge the battery ............................ 4

Before use .......................................................6

Set date and time ................................................. 6

Check for dial tone............................................... 6

Operating range .................................................. 6

Conﬁgure your telephone .............................. 7

Use the handset menu .........................................7

Set language .......................................................... 7

Set date and time .................................................. 7

Dial mode ............................................................... 7

Temporary tone dialing .......................................7

Telephone operations .....................................8

Make a call ............................................................. 8

Predial a call .......................................................... 8

Answer a call ......................................................... 8

End a call: ............................................................... 8

Volume ................................................................... 8

Mute ....................................................................... 8

Join a call in progress (for multiple handset

models only) .................................................... 9

Call waiting ............................................................ 9

Chain dialing ......................................................... 9

Find handset ....................................................... 10

Redial list ....................................................... 10

Review a redial list entry ................................... 10

Dial a redial list entry.......................................... 10

Delete a redial list entry .................................... 10

Phonebook ................................................... 11

Add a phonebook entry .................................... 11

Review a phonebook entry ...............................11

Alphabetical search ............................................12

Delete a phonebook entry ................................ 12

Edit a phonebook entry .....................................12

Dial a phonebook entry ..................................... 12

Caller ID ......................................................... 13

Review a caller ID log entry...............................13

Memory match ....................................................13

Missed call indicator ...........................................13

View dialing options.......................................... 14

Dial a caller ID log entry .................................... 14

Save a caller ID log entry to the phonebook .... 14

Delete the caller ID log entries ........................ 14

Sound settings .............................................. 15

Key tone ................................................................15

Ringer tone ..........................................................15

Telephone base ringer volume ........................15

Handset ringer volume ......................................15

Temporary ringer silencing ...............................15

About the built-in answering system and

voicemail service ......................................16

Set your built-in answering system ...............17

Turn the answering system on or off ...............17

Default announcement ......................................17

Record your own announcement ....................17

Play the announcement .................................... 18

Delete the announcement ............................... 18

Set number of rings ........................................... 18

Turn the call screening on or off ...................... 18

Turn the message alert tone on or off ............ 19

Use your built-in answering system ............. 19

New message indication .................................. 19

Message playback .............................................20

Adjust listening volume during message

playback: .........................................................21

Skip to the next message: ..................................21

Repeat the playing message: ...........................21

Listen to the previous message: .......................21

Stop the message playback: .............................21

Delete a message: ..............................................21

Delete all messages ............................................22

Remote access .....................................................22

Set your remote access code ............................23

Call screening ......................................................23

Call intercept ........................................................23

Record, play or delete memos .........................23

Use the built-in answering system and

voicemail service ......................................24

Retrieve voicemail from telephone service ... 24

Screen messages ........................................... 25

General product care .................................... 26

Frequently asked questions .......................... 26

The RBRC seal ................................................30

FCC, ACTA and IC regulations .......................30

California Energy Commission battery

charging testing instructions ................... 32

For C-UL compliance only ............................. 33

Limited warranty ...........................................36

Disclaimer and Limitation of Liability ........... 38

Technical speciﬁcations ................................ 39

What’s in the box

Your telephone package contains the

following items. Save your sales receipt

and original packaging in the event

warranty service is necessary.

NOTE

• To purchase a replacement battery or power

adapter, visit our website at

www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to

phones.vtechcanada.com or call

1 (800) 267-7377.

1 set for CS6324/CS6324-11/

VG104/VG104-11

2 sets for CS6324-2/CS6324-21/

VG104-2/VG104-21

3 sets for CS6324-3/CS6324-31/

VG104-3/VG104-31

1 set for CS6324-2/CS6324-21/

VG104-2/VG104-21

2 sets for CS6324-3/CS6324-31/

VG104-3/VG104-31

Quick Start

Guide with

Important

safety

instructions

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT162342/BT262342 (2.4V 300mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1939

Overview

Telephone base overview

1 – IN USE light

• Flashes when there is an incoming call,

or another telephone sharing the same

line is in use.

• On when the telephone is in use, or the

answering system is answering a call.

2 – VOL+/VOL-

• Adjust the listening volume.

• Adjust the telephone base ringer

volume.

3 – X/DELETE

• Delete the playing message.

• Press twice to delete all old messages.

– /SKIP

• Skip to the next message.

– /PLAY/STOP

• Play messages.

• Stop playing messages.

– /REPEAT

• Repeat a message.

• Press twice to play the previous

message.

4 – Message window

5 – ANS ON

• Turn on or off the answering system.

6 – FIND HS

• Page all system handsets.

7 – Charging pole

Handset overview

1 – LCD display

2 – VOL /

• Review the phonebook when the

phone is not in use.

• Scroll up while in a menu, or in the

phonebook, caller ID log or redial list.

• Move the cursor to the right when

entering numbers or names.

• Increase the listening volume during a

call or message playback.

3 – MENU/SELECT

• Show the menu.

• While in a menu, press to select an item,

or save an entry or setting.

4 – OFF/CANCEL

• Hang up a call.

• Return to the previous menu or idle

mode without making changes.

• Delete digits while predialing.

• Silence the handset ringer temporarily

while the phone is ringing.

• Erase the missed call indicator while the

handset is not in use.

5 – #

• Show other dialing options when

reviewing a caller ID log entry.

6 – REDIAL/PAUSE

• Review the redial list.

• Insert a dialing pause while dialing or

entering numbers into the phonebook.

7 – MUTE /DELETE

• Mute the microphone during a call.

• Silence the handset ringer temporarily

while the phone is ringing.

• Delete the displayed entry while

reviewing the phonebook, caller ID log

or redial list.

• Delete digits or characters when

entering numbers or names.

8 – VOL /CID

• Review the caller ID log when the

telephone is not in use.

• Scroll down while in a menu, or in the

phonebook, caller ID log or redial list.

• Move the cursor to the left when

entering numbers or names.

• Decrease the listening volume during a

call or message playback.

9 – TALK/FLASH

• Make or answer a call.

• Answer an incoming call when you

receive a call waiting alert.

10 – 1

• Press repeatedly to add or remove 1 in

front of the caller ID log entry before

dialing or saving it to the phonebook.

11 – TONE

• Switch to tone dialing temporarily

during a call.

12 – /Speakerphone

• Hands-free to make or answer a call.

13 – 0/OPER/

• Enter space character during text

editing.

Charger overview

1 – Charging pole

Display icons overview

The battery icon ﬂashes when

the battery is low and needs

charging.

The battery icon animates

when the battery is charging.

The battery icon becomes

solid when the battery is fully

charged.

Handset ringer is off.

There are new voicemail

received from your telephone

service provider.

NEW The entry you are reviewing is

new in the caller ID log.

ANS ON The answering system is

turned on.

10/16

MSG #MSG # The message number currently

playing and the total number

of messages.

Telephone base lights overview

IN USE • On when the telephone line

is in use.

• On when the answering

system is answering a call.

• Flashes quickly when there is

an incoming call.

• Flashes when another

telephone sharing the same

line is in use.

/ANS ON/

OFF On when the answering

system is turned on.

Connect

You can choose to connect the telephone

base for desktop usage or wall mounting.

NOTESNOTE

NOTES

• Use only the adapters provided.

• Make sure the electrical outlets are not

controlled by wall switches.

• The adapters are intended to be correctly

oriented in a vertical or ﬂoor mount position.

The prongs are not designed to hold the

plug in place if it is plugged into a ceiling,

under-the-table or cabinet outlet.

TIP

• If you subscribe to digital subscriber line

(DSL) high-speed Internet service through

your telephone line, make sure you install

a DSL ﬁlter (not included) between the

telephone line cord and telephone wall jack.

Contact your DSL service provider for more

information.

Connect the telephone base

Connect the charger

Mount the telephone base

Install and charge the battery

Install the battery

Install the battery as shown below.

NOTESNOTE

NOTES

• Use only supplied battery.

• Charge the battery provided with this

product only in accordance with the

instructions and limitations speciﬁed in this

manual.

• If the handset will not be used for a long

time, disconnect and remove the battery to

prevent possible leakage.

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT162342/BT262342 (2.4V 300mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1939

THIS SIDE UP

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT162342/BT262342 (2.4V 300mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1939

Charge the battery

Place the handset in the telephone base or

the charger to charge.

Once you have installed the battery, the

handset LCD display indicates the battery

status (see the following table).

NOTESNOTE

NOTES

• For best performance, keep the handset in

the telephone base or charger when not in

use.

• The battery is fully charged after 16 hours of

continuous charging.

• If you place the handset in the telephone

base or the charger without plugging in the

battery, the screen displays No battery.

Battery

indicators Battery

status Action

The screen

is blank, or

displays Put in

charger and

ﬂashes.

The battery

has no or

very little

charge. The

handset

cannot be

used.

Charge

without

interruption

(at least 30

minutes).

The screen

displays

Low battery

and ﬂashes.

The battery

has enough

charge to be

used for a

short time.

Charge

without

interruption

(about 30

minutes).

The screen

displays

HANDSET X.

The battery

is charged. To keep

the battery

charged,

place it in the

telephone

base or

charger when

not in use.

When the battery is fully charged, you can

expect the following performance:

Operation Operating

time

While in use (talking*) Seven hours

While not in use (standby**) Five days

* Operating times vary depending on your

actual use and the age of the battery.

** Handset is not charging nor in use.

Before use

After you install your telephone or power

returns following a power outage, the

handset will prompt you to set the date

and time.

Set date and time

NOTESNOTE

NOTE

• Make sure you set the date and time

including the year correctly; otherwise the

answering system does not announce the

correct day of the week for your recorded

messages time stamp.

1. Use the dialing keys (0-9) to enter the

month (MM), date (DD) and year (YY).

Then press SELECT.

2. Use the dialing keys (0-9) to enter the

hour (HH) and minute (MM). Then

press q or p to choose AM or PM.

3. Press SELECT to save.

Check for dial tone

Press TALK. If you hear a dial tone, the

installation is successful.

If you do not hear a dial tone:

• Make sure the installation procedures

described above are properly done.

• It may be a wiring problem. If you have

changed your telephone service to

digital service from a cable company or

a VoIP service provider, the telephone

line may need to be rewired to allow

all existing telephone jacks to work.

Contact your cable/VoIP service

provider for more information.

Operating range

This cordless telephone operates with the

maximum power allowed by the Federal

Communications Commission (FCC). Even

so, this handset and telephone base can

communicate over only a certain distance

- which can vary with the locations of the

telephone base and handset, the weather,

and the layout of your home or ofﬁce.

When the handset is out of range, the

handset displays Out of range or no pwr

at base.

If there is a call while the handset is out of

range, it may not ring, or if it does ring, the

call may not connect well when you press

TALK. Move closer to the telephone

base, then press TALK to answer the

call.

If the handset moves out of range during

a telephone conversation, there may be

interference. To improve reception, move

closer to the telephone base.

Conﬁgure your telephone

Use the handset menu

1. Press MENU when the phone is not in

use.

2. Press or until the screen displays

the desired feature menu.

3. Press SELECT.

• To return to the previous menu, press

CANCEL.

• To return to idle mode, press and hold

CANCEL.

Set language

The LCD language is preset to English. You

can select English, French or Spanish to be

used in all screen displays.

1. Press MENU when the handset is not

in use.

2. Press q or p to choose Settings and

then press SELECT twice.

3. Press q or p to choose English,

Français or Español.

4. Press SELECT twice to save your

setting. You hear a conﬁrmation tone.

NOTES

• If you accidentally set the LCD language to

Spanish or French, press MENU and then

enter 364# to change the handset LCD

language back to English while the handset

is not in use.

Set date and time

NOTESNOTE

NOTE

• Make sure you set the date and time

including the year correctly; otherwise the

answering system does not announce the

correct day of the week for your recorded

messages time stamp.

1. Press MENU on the handset when not

in use.

2. Press q or p to choose Set

date/time and then press SELECT.

3. Use the dialing keys (0-9) to enter the

month (MM), date (DD) and year (YY).

Then press SELECT.

4. Use the dialing keys (0-9) to enter the

hour (HH) and minute (MM). Then

press q or p to choose AM or PM.

5. Press SELECT to save your setting. Your

hear a conﬁrmation tone.

Dial mode

The dial mode is preset to touch-tone

dialing. If you have pulse (rotary) service,

you need to change the dial mode to

pulse dialing before using the telephone.

1. Press MENU when the handset is not

in use.

2. Press q or p to choose Settings, and

then press SELECT.

3. Press q or p to choose Dial mode,

then press SELECT.

4. Press or to choose Touch-tone or

Pulse, then press SELECT to conﬁrm

your selection. You hear a conﬁrmation

tone.

Temporary tone dialing

If you have pulse (rotary) service only,

you can switch from pulse to touch-tone

dialing temporarily during a call. This is

useful if you need to send touch-tone

signals to access your telephone banking

or long distance services.

1. During a call, press TONE .

2. Use the dialing keys to enter the

number. The telephone sends touch-

tone signals. It automatically returns to

pulse dialing mode after you end the

call.

Telephone operations

Make a call

• Press TALK or , and then dial the

telephone number.

NOTESNOTE

NOTES

• The screen shows the elapsed time as you

talk (in hours, minutes and seconds).

• If the handset is moved out of range while

on a call, it will beep three times.

Predial a call

• Enter the telephone number using

the dialing keys (0-9), then press

TALK to dial.

NOTESNOTE

NOTE

• When predialing (preview numbers

before dialing), press DELETE or CANCEL

to backspace and delete; press and hold

PAUSE to insert a dialing pause (a P appears).

Answer a call

• Press TALK. or any of the dialing

keys.

End a call:

• Press OFF or put the handset back in the

telephone base or charger.

Volume

• During a call, press VOLp or VOLq to

adjust the listening volume.

Mute

The mute function allows you to hear the

other party but the other party cannot hear

you.

1. During a call, press MUTE. The handset

displays Muted.

2. Press MUTE again to resume the

conversation. The handset displays

Microphone on brieﬂy.

Handset control key panel:

Join a call in progress (for multiple

handset models only)

You can use three handsets at a time on an

outside call.

• When a handset is already on a call,

press TALK on another handset to

join the call.

• To exit the call, press OFF on the

handset or place it in the telephone

base or charger. The call continues until

all handsets hang up.

Call waiting

When you subscribe to call waiting service

from your telephone service provider, you

hear an alert tone if there is an incoming

call while you are already on a call.

• Press FLASH to put the current call on

hold and take the new call.

• Press FLASH at any time to switch back

and forth between calls.

If you also subscribe to caller ID service, it

will let you see the name and telephone

number of the caller during call waiting.

It may be necessary to change your

telephone service to use this feature.

Contact your telephone service provide if:

• You have both caller ID and call waiting,

but as separate service (you may need

to combine these service);

• You have only caller ID service, or only

call waiting service; or

• You do not subscribe to caller ID or call

waiting services.

There are fees for caller ID services. In

addition, services may not be available in

all areas.

Chain dialing

Use this feature to initiate a dialing

sequence from numbers stored in the

phonebook, caller ID log or redial while

you are on a call.

Chain dialing can be useful if you wish

to access other numbers (such as bank

account numbers or access codes) from

the phonebook, caller ID log or redial list.

To access a number in the phonebook

while on a call:

1. Press MENU/SELECT twice to enter the

phonebook.

2. Press q or p to scroll to the desired

entry.

3. Press SELECT to dial the displayed

number.

To access a number in the caller ID log

while on a call:

1. Press MENU and then press q or p to

select Caller ID log.

2. Press SELECT and then press q or p

to scroll to the desired entry.

3. Press SELECT to dial the displayed

number.

To access a number in the redial list

while on a call:

1. Press REDIAL.

2. Press q, p or REDIAL repeatedly to

browse to the desired entry.

3. Press SELECT to dial the displayed

number.

NOTESNOTE

NOTES

• You cannot edit a phonebook entry while

on a call. Refer to the Phonebook section for

more details.

• You cannot copy a caller ID log entry into

the phonebook while on a call. Refer to the

Caller ID log section for more details.

• You cannot erase a redial entry while on a

call. Refer to the Redial list section for more

details.

• Press CANCEL to exit redial, phonebook or

caller ID log when you are on a call.

Find handset

Use this feature to ﬁnd the system handset.

To start paging:

• Press FIND HS on the telephone base

when not in use.

All idle handsets ring and display

** Paging **.

To end paging:

• Press FIND HS at the telephone base.

-OR-

• Press TALK or any of the dialing keys

on the handset.

NOTESNOTE

NOTES

• Press MUTE to turn off the ringer of a

handset temporarily. Paging tone continues

on the other handset.

• Do not press and hold FIND HS for more

than four seconds. It may lead to handset

deregistration. If the handset displays To

handset back to the telephone base.

Redial list

Each handset stores the last ﬁve telephone

numbers dialed. Entries are shown in

reverse chronological order. When there

are already ﬁve entries, the oldest entry is

deleted to make room for the new entry.

Review a redial list entry

1. Press REDIAL when the handset is not

in use.

2. Press q, p or REDIAL repeatedly until

the desired entry displays.

Dial a redial list entry

1. Press REDIAL when the handset is not

in use.

2. Press q, p or REDIAL repeatedly until

the desired entry displays.

3. Press TALK to dial.

-OR-

1. Press TALK when the handset is not

in use.

2. Press REDIAL and then press q, p or

REDIAL repeatedly until the desired

entry displays.

3. Press SELECT to dial.

Delete a redial list entry

1. Press REDIAL when the handset is not

in use.

2. Press q, p or REDIAL repeatedly to

browse to the desired entry.

3. Press DELETE to delete the displayed

number. You hear a conﬁrmation tone.

Phonebook

The phonebook can store up to 30 entries,

which are shared by all handsets. Each

entry may consist of a telephone number

up to 30 digits, and a name up to

15 characters.

Each handset phonebook is independent

(for multiple handset models only). Any

additions, deletions or edits made on

one handset are not reﬂected on other

handsets.

If the telephone number in the

phonebook exceeds 15 digits, a dash

appears after the 14th digit and then the

remaining digits are shown beginning with

a dash, alternately.

Add a phonebook entry

1. Enter the number when the phone is

not in use. Press MENU, then go to

Step 3.

-OR-

Press MENU when the phone is not

in use, then press or to scroll to

Phonebook. Press SELECT twice to

choose Add contact.

2. When Enter number displays, use the

dialing keys to enter the number.

-OR-

Copy a number from the redial list

by pressing REDIAL and then press

q, p or REDIAL repeatedly to select

a number. Press SELECT to copy the

number.

3. Press SELECT to move on to enter

the name. The handset displays Enter

name.

4. Use the dialing keys to enter the

name. Additional key presses show

other characters of that particular key.

The ﬁrst character of every word is

capitalized.

5. Press SELECT to save. The handset

displays Saved and then you hear a

conﬁrmation tone.

While entering names and numbers, you

can:

• Press DELETE to backspace and erase a

digit or character.

• Press and hold DELETE to erase the

entire entry.

• Press q or p to move the cursor to the

left or right.

• Press and hold PAUSE to insert a dialing

pause (for entering numbers only).

• Press 0 to add a space (for entering

names only).

Review a phonebook entry

Entries are sorted alphabetically.

1. Press when the phone is not in use.

2. Press q or p to browse through the

phonebook, or use the dialing keys to

start a name search.

-OR-

1. Press MENU when the handset is not

in use.

2. Press q or p to scroll to Phonebook

then press SELECT.

3. Press q or p to scroll to Review and

then press SELECT.

4. Press q or p to browse.

Alphabetical search

1. Follow the steps in Review a

phonebook entry above to enter the

phonebook.

2. Use the dialing keys to enter the

letter associated with the name. For

example, if you have entries for Jenny,

Jessie, Kristen and Laura in your

phonebook, press 5 (JKL) once to see

Jenny (when Jenny displays, press

q to see Jessie), twice to see Kristen,

or three times to see Laura. If there is

no name entry matching your search,

the next closest match in alphabetical

order appears. If necessary, press q or

p to browse.

Delete a phonebook entry

1. Search for the desired entry in the

phonebook (see Review a phonebook

entry or Alphabetical search).

2. When the desired entry appears, press

DELETE. The handset displays Delete

contact? and the number.

3. Press SELECT to conﬁrm. The handset

displays Deleting ... and then Contact

deleted. You hear a conﬁrmation tone.

Edit a phonebook entry

1. Search for the desired entry in the

phonebook (see Review a phonebook

entry or Alphabetical search).

2. When the desired entry appears, press

SELECT. The handset displays Edit

number and the stored number.

3. Use the dialing keys to edit the

number, then press SELECT. The

handset displays Edit name and then

the stored name.

4. Use the dialing keys to enter the

name. Additional key presses show

other characters of that particular key.

The ﬁrst character of every word is

capitalized.

5. Press SELECT to save. The handset

displays Saved and then you hear a

conﬁrmation tone.

Dial a phonebook entry

1. Search for the desired entry in the

phonebook (see Review a phonebook

entry or Alphabetical search).

2. When the desired entry appears, press

TALK to dial.

Caller ID

If you subscribe to caller ID service,

information about each caller appears after

the ﬁrst or second ring. If you answer a call

before the caller information appears on

the screen, it will not be saved in the caller

ID log.

The caller ID log stores up to 30 entries.

Each entry has up to 24 digits for the

phone number and 15 characters for the

name.

If the telephone number has more that 15

digits, only the last 15 digits appear.

If the name has more than 15 characters,

only the ﬁrst 15 characters are shown and

saved in the caller ID log.

Entries appear in reverse chronological

order. When the caller ID log is full, the

oldest entry is deleted to make room for

new incoming call information.

Caller ID log entries are shared by all

system handsets (for multiple handset

models only). Any deletions made on

one handset are reﬂected on all other

handsets.

NOTESNOTE

NOTE

• This product can provide information

only if both you and the caller are in areas

offering caller ID service and if both

telephone service providers use compatible

equipment. The time and date are sent by

your telephone service provider along with

the call information.

Review a caller ID log entry

1. Press CID when the phone is not in

use.

2. Press q or p to browse through the

caller ID log.

-OR-

1. Press MENU when the phone is not in

use. Press q or p to select Caller ID

log.

2. Press SELECT twice and then press q

or p to browse.

NOTESNOTE

NOTE

• You hear two beeps when you reach the

beginning or end of the caller ID log.

Memory match

When the incoming telephone number

matches the last seven digits of a

telephone number in your phonebook,

the screen displays the stored name of the

phonebook entry.

For example, if Linda Jones calls, her name

appears as Linda if this is how you entered

it into your phonebook.

NOTESNOTE

NOTE

• The number shown in the caller ID log

is in the format sent by the telephone

service provider. It usually delivers 10-digit

telephone numbers (area code plus phone

number). If the last seven digits of the

incoming telephone number does not match

a number in your phonebook, the name

appears as it is delivered by the telephone

service provider.

Missed call indicator

When there are calls that have not been

reviewed in the caller ID log, the handset

displays XX missed calls.

Each time you review a caller ID log entry

marked NEW, the number of missed calls

decreases by one.

When you have reviewed all the missed

calls, the missed call indicator no longer

displays.

If you do not want to review the missed

calls one by one, press and hold CANCEL

on the idle handset to erase the missed

call indicator. All the entries are then

considered old.

La page charge ...

VTech VG104-11 Manuel utilisateur

Marque: VTech

Modèle: VG104-11

Catégorie: Téléphones

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: VTech VG104-11 User manual

VTech VG104-11 Manuel utilisateur

Ce manuel convient également à

VTech VG104-11 Manuel utilisateur

dans d''autres langues

Documents connexes