VTech CS5219-3 Manuel utilisateur

Marque: VTech

Modèle: CS5219-3

Catégorie: Téléphones

Taper: Manuel utilisateur

Ce manuel convient également à

Go to www.vtechphones.com (US)

to register your product for enhanced

warranty support and latest VTech

product news.

Go to phones.vtechcanada.com

(Canada) for the latest VTech product

news.

User’s manual

CS5219

CS5219-16

CS5219-2

CS5219-26

CS5219-3

CS5219-36

DECT 6.0 cordless telephone

Congratulations

on purchasing your new VTech product.

Before using this telephone, please read

Important safety instructions.

This manual has all the feature

operations and troubleshooting

necessary to install and operate your

new VTech telephone. Please review

this manual thoroughly to ensure

proper installation and operation of

this innovative and feature rich VTech

product.

For support, shopping, and everything

new at VTech, visit our website at

www.vtechphones.com.

In Canada, please visit

phones.vtechcanada.com.

Telephones identified with

this logo have reduced

noise and interference

when used with most T-coil

equipped hearing aids

and cochlear implants.

The TIA-1083 Compliant

Logo is a trademark of

the Telecommunications

Industry Association. Used

under license.

The ENERGY STAR®

program (www.energystar.

gov) recognizes and

encourages the use of

products that save energy

and help protect our

environment. We are proud

to mark this product with

the ENERGY STAR® label

indicating it meets the

latest energy efficiency

guidelines.

Important safety

instructions

When using your telephone equipment,

basic safety precautions should always

be followed to reduce the risk of fire,

electric shock and injury, including the

following:

1. Read and understand all instructions.

2. Follow all warnings and instructions

marked on the product.

3. Unplug this product from the wall

outlet before cleaning. Do not use

liquid or aerosol cleaners. Use a

damp cloth for cleaning.

4. CAUTION: Do not install the

telephone base at a height above 2

meters.

5. Do not use this product near water

such as near a bath tub, wash bowl,

kitchen sink, laundry tub or swimming

pool, or in a wet basement or shower.

6. Do not place this product on an

unstable table, shelf, stand or other

unstable surfaces.

7. Avoid placing the telephone system

in places with extreme temperature,

direct sunlight, or other electrical

devices. Protect your phone from

moisture, dust, corrosive liquids and

fumes.

8. Slots and openings in the back or

bottom of the telephone base and

handset are provided for ventilation.

To protect them from overheating,

these openings must not be blocked

by placing the product on a soft

surface such as a bed, sofa or rug.

This product should never be placed

near or over a radiator or heat register.

This product should not be placed in

any area where proper ventilation is

not provided.

9. This product should be operated

only from the type of power source

indicated on the marking label. If

you are not sure of the type of power

supply in your home or office, consult

your dealer or local power company.

10. Do not allow anything to rest on

the power cord. Do not install this

product where the cord may be

Compatible with

Hearing Aid T-Coil

TIA-1083

walked on.

11. Never push objects of any kind into

this product through the slots in the

telephone base or handset because

they may touch dangerous voltage

points or create a short circuit. Never

spill liquid of any kind on the product.

12. To reduce the risk of electric shock,

do not disassemble this product,

but take it to an authorized service

facility. Opening or removing parts of

the telephone base or handset other

than specified access doors may

expose you to dangerous voltages or

other risks. Incorrect reassembling

can cause electric shock when the

product is subsequently used.

13. Do not overload wall outlets and

extension cords.

14. Unplug this product from the wall

outlet and refer servicing to an

authorized service facility under the

following conditions:

• When the power supply cord or

plug is damaged or frayed.

• If liquid has been spilled onto the

product.

• If the product has been exposed

to rain or water.

• If the product does not operate

normally by following the

operating instructions. Adjust only

those controls that are covered

by the operation instructions.

Improper adjustment of other

controls may result in damage and

often requires extensive work by

an authorized technician to restore

the product to normal operation.

• If the product has been dropped

and the telephone base and/or

handset has been damaged.

• If the product exhibits a distinct

change in performance.

15. Avoid using a telephone (other than

cordless) during an electrical storm.

There is a remote risk of electric

shock from lightning.

16. Do not use the telephone to report

a gas leak in the vicinity of the

leak. Under certain circumstances,

a spark may be created when the

adapter is plugged into the power

outlet, or when the handset is

replaced in its cradle. This is a

common event associated with the

closing of any electrical circuit. The

user should not plug the phone

into a power outlet, and should

not put a charged handset into

the cradle, if the phone is located

in an environment containing

concentrations of flammable or

flame-supporting gases, unless there

is adequate ventilation. A spark in

such an environment could create a

fire or explosion. Such environments

might include: medical use of

oxygen without adequate ventilation;

industrial gases (cleaning solvents;

gasoline vapors; etc.); a leak of

natural gas; etc.

17. Only put the handset of your

telephone next to your ear when it is

in normal talk mode.

18. The power adapters are intended to

be correctly oriented in a vertical or

floor mount position. The prongs are

not designed to hold the plug in place

if it is plugged into a ceiling,

under-the-table or cabinet outlet.

19. For pluggable equipment, the

socket-outlet shall be installed near

the equipment and shall be easily

accessible.

20. CAUTION: Use only the

batteries indicated in this manual.

There may be a risk of explosion if

a wrong type of battery is used for

the handset. Use only the supplied

rechargeable batteries or replacement

batteries (BT162342/BT262342)

for the handset. Do not dispose of

batteries in a fire. They may explode.

Dispose of used battery according to

the instruction.

21. Use only the adapter included with

this product. Incorrect adapter polarity

or voltage can seriously damage the

product.

22. The applied nameplate is located at

the bottom or near of the product.

SAVE THESE INSTRUCTIONS

Battery

• Use only the battery provided or

equivalent. To order a replacement,

visit our website at

www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to

phones.vtechcanada.com or call

1 (800) 267-7377.

• Do not dispose of the battery in a fire.

Check with local waste management

codes for special disposal instructions.

• Do not open or mutilate the battery.

Released electrolyte is corrosive and

may cause burns or injury to the eyes

or skin. The electrolyte may be toxic if

swallowed.

• Exercise care in handling batteries in

order not to create a short circuit with

conductive materials.

• Charge the battery provided with this

product only in accordance with the

instructions and limitations specified

in this manual.

Precautions for users of

implanted cardiac pacemakers

Cardiac pacemakers (applies only to

digital cordless telephones):

Wireless Technology Research, LLC

(WTR), an independent research entity,

led a multidisciplinary evaluation of the

interference between portable wireless

telephones and implanted cardiac

pacemakers. Supported by the U.S.

Food and Drug Administration, WTR

recommends to physicians that:

Pacemaker patients

• Should keep wireless telephones at

least six inches from the pacemaker.

• Should NOT place wireless telephones

directly over the pacemaker, such as in

a breast pocket, when it is turned ON.

• Should use the wireless telephone at

the ear opposite the pacemaker.

WTR’s evaluation did not identify any

risk to bystanders with pacemakers

from other persons using wireless

telephones.

About cordless telephones

• Privacy: The same features that make

a cordless telephone convenient

create some limitations. Telephone

calls are transmitted between the

telephone base and the cordless

handset by radio waves, so there is a

possibility that the cordless telephone

conversations could be intercepted

by radio receiving equipment within

range of the cordless handset. For

this reason, you should not think of

cordless telephone conversations as

being as private as those on corded

telephones.

• Electrical power: The telephone

base of this cordless telephone must

be connected to a working electrical

outlet. The electrical outlet should not

be controlled by a wall switch. Calls

cannot be made from the cordless

handset if the telephone base is

unplugged, switched off or if the

electrical power is interrupted.

• Potential TV interference: Some

cordless telephones operate

at frequencies that may cause

interference to televisions and

VCRs. To minimize or prevent

such interference, do not place

the telephone base of the cordless

telephone near or on top of a TV or

VCR. If interference is experienced,

moving the cordless telephone farther

away from the TV or VCR often

reduces or eliminates the interference.

• Rechargeable batteries: Exercise

care in handling batteries in order

not to create a short circuit with

conducting material such as rings,

bracelets and keys. The battery or

conductor may overheat and cause

harm. Observe proper polarity

between the battery and the battery

charger.

• Nickel-metal hydride rechargeable

batteries: Dispose of these batteries

in a safe manner. Do not burn or

puncture the battery. Like other

batteries of this type, if burned or

punctured, they could release caustic

material which could cause injury.

Table of contents

What’s in the box.........................1

Overview ......................................2

Handset overview ...............................2

Telephone base overview ...................3

Charger overview ...............................3

Display icons overview .......................4

Handset and Telephone base lights

overview ..........................................4

Connect ........................................5

Connect the telephone base ...............5

Connect the charger ........................... 5

Mount the telephone base .................. 5

Install and charge the battery .............6

Charge the battery ..............................7

Before use ....................................8

Set date and time ...............................8

Check for dial tone ..............................8

Operating range ..................................8

Configure your telephone ..........9

Using the handset menu .....................9

Set language ......................................9

Set date and time ...............................9

Home area code ................................. 9

Dial mode .........................................10

Temporary tone dialing .....................10

Telephone Operations ..............10

Make a call .......................................11

Predial a call ..................................... 11

Answer a call ....................................11

End a call ..........................................11

Speakerphone ..................................11

Volume ..............................................11

Mute ..................................................11

Join a call in progress ....................... 11

Call waiting .......................................12

Chain dialing .....................................12

Find handset .....................................13

Redial list ..................................13

Review a redial list entry ...................13

Dial a redial list entry ........................13

Delete a redial list entry .................... 13

Multiple handset use .................14

Intercom ...........................................14

Answer an incoming call during an

intercom call ..................................14

Call transfer using intercom .............. 14

Phonebook .................................15

Add a phonebook entry ....................15

Review the phonebook entries .........16

Alphabetical search ..........................16

Edit a phonebook entry ....................16

Delete a phonebook entry ................17

Dial a phonebook entry ....................17

Caller ID ......................................17

Review the caller ID log ....................17

Memory match ..................................18

Missed call indicator .........................18

View dialing options ..........................18

Dial a caller ID log entry ...................19

Save a caller ID log entry to the

phonebook ....................................19

Delete the caller ID log entries .........19

Call block ...................................20

Block unknown calls .........................20

Add a call block entry .......................20

Review call block list ......................... 20

Edit a call block list entry ..................21

Save a caller ID log entry to call

block list ........................................21

Delete a call block list entry ..............21

Mute rings of blocked calls ...............21

Sound settings .........................22

Key tone ............................................22

Ringer tone ....................................... 22

Ringer volume ..................................22

Temporary ringer silencing ...............22

Quiet mode ....................................... 23

Retrieve voicemail from

telephone service ...................23

Retrieve voicemail ............................23

Set your voicemail number ...............23

Turn off the new voicemail

indicators .......................................24

Expand your telephone system ...

Screen messages ......................25

Frequently asked questions .....26

ECO mode ..................................29

General product care ................30

The RBRC® seal .........................30

FCC, ACTA and IC regulations ...

California Energy Commission

battery charging testing

instructions .............................33

For C-UL compliance only ........33

Disclaimer and Limitation of

Liability ....................................39

Limited Warranty .......................37

Technical Specifications ........... 39

What’s in the box

Your telephone package contains the

following items. Save your sales receipt

and original packaging in case it is

necessary to ship your telephone for

warranty service.

NOTE

To purchase replacement batteries or power

adapters, visit our website at

www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to

phones.vtechcanada.com or dial

1 (800) 267-7377.

Quick start guide

1 set for CS5219/CS5219-16/

CS5219-2/CS5219-26/CS5219-3/

CS5219-36

1 set for CS5219/ CS5219-16

2 sets for CS5219-2/CS5219-26

3 sets for CS5219-3/CS5219-36

1 set for CS5219-2/CS5219-26

2 sets for CS5219-3/CS5219-36

1 set for CS5219/CS5219-16/

CS5219-2/CS5219-26/CS5219-3/

CS5219-36

Overview

Handset overview

1 – Handset earpiece

2 – LCD display

3 –

• Show the menu.

• While in a menu, press to select

an item, or save an entry or

setting.

4 –

• Review the phonebook when the

phone is not in use.

• Increase the listening volume

during a call.

• Scroll up while in a menu,

phonebook, caller ID log, or

redial list.

• Move the cursor to the right when

entering numbers or names.

• Review the caller ID log when the

phone is not in use.

• Decrease the listening volume

during a call.

• Scroll down while in a menu,

phonebook, caller ID log, or

redial list.

• Move the cursor to the left when

entering numbers or names.

5 –

• Hang up a call.

• Silence the ringer temporarily

while the handset is ringing.

• Press and hold to erase the

missed call indicator while the

phone is not in use.

• Press to return to the previous

menu; or press and hold to return

to idle mode, without making

changes.

6 –

• Press repeatedly to show other

dialing options when reviewing a

caller ID log entry.

7 –

• Press to start an intercom

conversation or transfer a call (for

multi-handset models only).

8 –

• Mute the microphone during a

call.

• Delete digits or characters while

using the dialing keys.

• Silence the ringer temporarily

while the handset is ringing.

9 – light

• On when the handset is

charging.

10 –

• Press repeatedly to review the

redial list.

• Press and hold to insert a dialing

pause while entering a number.

11 –

• Make or answer a call.

• Answer an incoming call when

you hear a call waiting alert.

12 –

• Press repeatedly to add or

remove 1 in front of the caller ID

log entry before dialing or saving

it to the phonebook.

• Press and hold to set or dial your

voicemail number.

13 –

• While you have set the dial mode

to pulse and on a call, press to

switch to tone dialing temporarily.

14 –

• Make or answer a call using the

handset speakerphone.

• During a call, press to switch

between the speakerphone and

the handset earpiece.

15 – Microphone

Telephone base overview

1 – light

• Flashes when there is an

incoming call, or another

telephone sharing the same line

is in use.

• Flashes when handsets are

being deregistered.

• On when the handset is in use or

being registered.

2 – /FIND HS

• Press to page all system

handsets.

3 – Charging pole

Charger overview

1 – Charging pole

Display icons overview

The battery icon flashes

when the battery is low

and needs charging.

The battery icon animates

when the battery is charging.

The handset ringer is off.

There are new voicemail

received from your

telephone service

provider.

ECO The ECO mode activates

automatically to reduce

power consumption when

the handset is within range

from the telephone base.

NEW There are new caller ID

log entries.

Handset and Telephone base

lights overview

Handset lights

On when the handset

speakerphone is in use.

On when the handset

is charging in the

telephone base or

handset charger.

Telephone base lights

On when the

telephone line is in

use.

On when you

are registering a

handset.

Flashes quickly

when there is an

incoming call.

Flashes when

another telephone

sharing the same

line is in use.

Flashes when you

are deregistering all

handsets.

Connect

You can choose to connect the telephone

base for desktop usage or wall mounting.

NOTE

• Use only the adapters provided.

• Make sure the electrical outlets are not

controlled by wall switches.

• The adapters are intended to be correctly

oriented in a vertical or floor mount

position. The prongs are not designed to

hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

TIP

• If you subscribe to digital subscriber line

(DSL) high-speed Internet service through

your telephone line, make sure you install

a DSL filter (not included) between the

telephone line cord and telephone wall

jack. Contact your DSL service provider

for more information.

Connect the telephone base

Connect the charger

Mount the telephone base

1. Connect the telephone line cord to

the telephone base. Route it through

the wall mount bracket, and then

connect it to the wall jack.

2. Align and place the wall mount

bracket on the standard wall plate.

3. Align and place the telephone base on

the wall mount bracket. Slide it down

until it clicks securely in place.

4. Connect the power adapter.

Install and charge the battery

Install the battery as shown below.

NOTE

• Use only the battery provided.

• Charge the battery provided with this

product only in accordance with the

instructions and limitations specified in this

manual.

• If the handset will not be used for a long

time, disconnect and remove the battery to

prevent possible leakage.

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT183342/BT283342 (2.4V 400mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1535

THIS SIDE UP

CÔTÉ VERS LE HAUT

s :

2.4V 400mAh Ni-MH)

EMENT :

URE BATTERIES.

ERLES PILES.

CR1535

Charge the battery

Place the handset in the telephone base

or the charger to charge.

Once you have installed the battery,

the handset LCD display indicates the

battery status (see the table below).

NOTE

• For best performance, keep the handset in

the telephone base or charger when not

in use.

• The battery is fully charged after 12 hours

of continuous charging.

• If you place the handset in the telephone

base or the charger without plugging

in the battery, the screen displays

No battery.

Battery

indicators

Battery

status

Action

The screen

is blank, or

shows Put

in charger

and

flashes.

The battery

has no

charge or

very little

charge. The

handset

cannot be

used.

Charge

without

interruption

(at least 30

minutes).

The screen

shows Low

battery and

flashes.

The battery

has enough

charge to be

used for a

short time.

Charge

without

interruption

(at least 30

minutes).

The screen

shows

HANDSET X.

The battery is

charged.

To keep

the battery

charged,

place it in the

telephone

base or

charger when

not in use.

When it is fully charged, you can expect

the following performance:

Operation Operating time

While in handset

use (talking*)

Seven hours

While in

speakerphone

mode (talking*)

Three and a half

hours

While not in use

(standby**)

Five days

* Operating times vary depending on your actual

use and the age of the battery.

** Handset is not charging or in use.

Before use

After you install your telephone or

power returns following a power outage,

the handset will prompt you to set the

date and time.

Set date and time

1. Use the dialing keys (0-9) to enter

the month (MM), date (DD) and year

(YY). Then press SELECT.

2. Use the dialing keys (0-9) to enter the

hour (HH) and minute (MM). Then

press or to choose AM or PM.

3. Press SELECT to save.

Check for dial tone

Press . If you hear a dial tone, the

installation is successful.

If you do not hear a dial tone:

• Make sure the installation procedures

described above are properly done.

• It may be a wiring problem. If you

have changed your telephone

service to digital service from a cable

company or a VoIP service provider,

the telephone line may need to be

rewired to allow all existing telephone

jacks to work. Contact your cable/

VoIP service provider for more

information.

Operating range

This cordless telephone operates with

the maximum power allowed by the

Federal Communications Commission

(FCC). Even so, this handset and

telephone base can communicate over

only a certain distance - which can

vary with the locations of the telephone

base and handset, the weather, and the

layout of your home or office.

When the handset is out of range, the

handset displays Out of range or no pwr

at base.

If there is a call while the handset is

out of range, it may not ring, or if it

does ring, the call may not connect well

when you press . Move closer to the

telephone base, and then press

to answer the call. If the handset

moves out of range during a telephone

conversation, there may be interference.

To improve reception, move closer to the

telephone base.

Configure your telephone

Using the handset menu

1. Press MENU when the phone is not

in use.

2. Press or until the screen displays

the desired feature menu.

3. Press SELECT to enter that menu.

• To return to the previous menu, press

CANCEL on the handset.

• To return to idle mode, press and hold

CANCEL on the handset.

Set language

The LCD language is preset to English.

You can select English, French or

Spanish to be used in all screen displays.

1. Press MENU when the handset is not

in use.

2. Press or to choose Settings,

and then press SELECT.

3. Press SELECT to choose LCD

language.

4. Press or to choose English,

Français or Español, and then press

SELECT. Then the handset returns

to the previous menu. You hear a

confirmation tone.

Set date and time

1. Press MENU when the handset is not

in use.

2. Press or to choose Set date/time,

and then press SELECT.

3. Use the dialing keys (0-9) to enter

the month (MM), date (DD) and year

(YY). Then press SELECT.

4. Use the dialing keys (0-9) to enter the

hour (HH) and minute (MM). Then

press or to choose AM or PM.

5. Press SELECT to save. Then the

handset returns to the previous

menu. You hear a confirmation tone.

Home area code

If you dial your local calls using only

seven digits (area code not required),

you can program your home area code

so that when you receive a call within

your local area, the telephone number

is automatically stored without the area

code in the caller ID log.

1. Press MENU when the phone is not

in use.

2. Press or to choose Settings, and

then press SELECT.

3. Press or to choose Home area

code, and then press SELECT.

4. Use the dialing keys to enter a

three-digit home area code.

5. Press SELECT to save your

selection. Then the handset returns

to the previous menu. You hear a

confirmation tone.

NOTE

• If, in the future, your telephone service

provider requires you to dial the area

code when making a local call, or, if you

move to a location that requires it, delete

the home area code you have already

programmed, following the steps above.

After you have deleted the home area

code, _ _ _ will appear on the display.

Dial mode

The dial mode is preset to touch-

tone dialing. If you have pulse (rotary)

service, you need to change the dial

mode to pulse dialing before using the

telephone to make a call.

1. Press MENU when the phone is not

in use.

2. Press or to choose Settings,

and then press SELECT.

3. Press or to choose Dial mode,

and then press SELECT.

4. Press or to choose Touch-tone

or Pulse.

5. Press SELECT to save your

selection. Then the handset returns

to the previous menu. You hear a

confirmation tone.

Temporary tone dialing

If you have pulse (rotary) service only,

you can switch from pulse to touch-tone

dialing temporarily during a call. This

is useful if you need to send touch-

tone signals to access your telephone

banking or long distance services.

1. During a call, press .

2. Use the dialing keys to enter the

number. The telephone sends

touch-tone signals. The telephone

automatically returns to pulse dialing

mode after you end the call.

Telephone Operations

Handset control key panel:

Make a call

1. Press or on the handset.

2. When you hear a dial tone, dial the

number.

• The handset displays Unable to

call if the telephone line is in use.

NOTE

• The handset shows the elapsed time as

you talk (in hours, minutes and seconds).

• While entering numbers, press and hold

PAUSE to insert a dialing pause

(a p appears).

Predial a call

1. Enter the telephone number.

2. Press or to dial.

NOTE

• The handset displays Unable to call if

the telephone line is in use.

• The handset shows the elapsed time as

you talk (in hours, minutes and seconds).

• While entering numbers, press DELETE

or CANCEL to make corrections;

press and hold PAUSE to insert a dialing

pause (a p appears).

Answer a call

Press , , or any dialing key (0-9,

, or ) to answer.

End a call

Press OFF on the handset, or place the

handset in the telephone base or

handset charger.

Speakerphone

During a call, press to switch

between the speakerphone

and the handset earpiece. When the

speakerphone is active, the handset

displays Speaker.

Volume

During a call, press /VOLUME/ to

adjust the listening volume.

NOTE

• The handset and speakerphone volume

settings are independent.

• When the volume reaches the minimum

or maximum setting, you hear two beeps.

Mute

The mute function allows you to hear

the other party but the other party

cannot hear you.

• During a call, press MUTE. The

handset displays Muted until the

mute function is turned off.

• Press MUTE again to resume the

conversation. The handset briefly

displays Microphone on.

Join a call in progress

You can use up to two system handsets

at a time on an outside call.

• When a handset is already on a call,

press or on another handset to

join the call.

• Press OFF or place the handset

in the telephone base or handset

charger to exit the call. The call

continues until all handsets hang up.

NOTE

• If you have paired a DECT 6.0 cordless

headset and speakerphone to the

telephone base, you can also join a call

in progress using the paired device. Refer

to the user’s manuals of the respective

product for more information.

Call waiting

When you subscribe to call waiting

service with your telephone service

provider, you hear an alert tone if there

is an incoming call while you are on

another call.

• Press FLASH to put the current call

on hold and take the new call.

• Press FLASH at any time to switch

back and forth between calls.

If you also subscribe to caller ID

service, it will let you see the name and

telephone number of the caller during

call waiting.

It may be necessary to change your

telephone service to use this feature.

Contact your telephone service provider

if:

• You have both caller ID and call

waiting, but as separate service (you

may need to combine these service);

• You have only caller ID service, or

only call waiting service; or

• You do not subscribe to caller ID or

call waiting services.

There are fees for caller ID services. In

addition, services may not be available

in all areas.

Chain dialing

Use this feature to initiate a dialing

sequence from numbers stored in the

phonebook, caller ID log or redial list

while you are on a call.

Chain dialing can be useful if you wish

to access other numbers (such as bank

account numbers or access codes)

from the phonebook, caller ID log or

redial list.

To access a number from the

phonebook while on a call:

1. Press MENU.

2. Press SELECT to select Phonebook.

3. Press or to scroll to the desired

entry.

4. Press SELECT to dial the displayed

number.

To access a number from the

caller ID log while on a call:

1. Press MENU.

2. Press or to choose Caller ID log,

and then press SELECT.

3. Press or to scroll to the desired

entry.

4. Press SELECT to dial the displayed

number.

To access a number from the

redial list while on a call:

1. Press REDIAL to enter the redial list.

2. Press , , or REDIAL repeatedly to

browse to the desired entry.

3. Press SELECT to dial the displayed

number.

Find handset

This feature helps you find all system

handsets.

To start paging:

• Press /FIND HANDSET on the

telephone base.

All idle handsets ring and display

** Paging **.

To end paging:

• Press /FIND HANDSET again on

the telephone base.

-OR-

• Press , OFF, or any dialing key

(0-9, , or ) on the handset.

-OR-

• Place the handset in the telephone

base or charger.

NOTE

• Press MUTE to turn off the ringer of a

handset temporarily. Paging tone continues

on the other handset.

• Do not press and hold /FIND HANDSET

for more than four seconds. It may lead

to handset deregistration. If the handset

displays To register HS... and ...see

manual, refer to the Frequently asked

questions section to register the handset

back to the telephone base.

Redial list

Each handset stores the last

10 telephone numbers dialed. Entries

are shown in reverse chronological

order. When there are already

10 entries, the oldest entry is deleted to

make room for the new entry.

Review a redial list entry

1. Press REDIAL to enter the redial list.

2. Press , , or REDIAL repeatedly

to browse until the desired entry

displays.

NOTE

• You hear a double beep when you reach

the beginning or end of the redial list.

Dial a redial list entry

1. Press REDIAL to enter the redial list.

2. Press , , or REDIAL repeatedly

to browse until the desired entry

displays.

3. Press or to dial.

-OR-

1. Press or to take the line.

2. Press REDIAL to enter the redial list.

3. Press , , or REDIAL repeatedly

to browse until the desired entry

displays.

4. Press SELECT to dial the displayed

number.

Delete a redial list entry

1. Press REDIAL to enter the redial list.

2. Press , , or REDIAL repeatedly

to browse until the desired entry

displays.

3. When the handset displays the number

you want to delete, press DELETE.

You hear a confirmation tone.

Multiple handset use

Intercom

Use the intercom feature for

conversations between two handsets.

Your telephone base supports up to

five handsets. You can buy additional

expansion handsets (CS6909) for this

telephone base.

1. Press INT on your handset when not

in use.

• If you have only one handset, your

handset displays INT needs 2 HS.

• If you have two handsets, your

handset displays Calling HS X.

• If you have three or more

handsets, your handset displays

Intercom to. Use the dialing keys

to enter a destination handset. Your

handset displays Calling HS X.

The destination handset rings and its

screen displays HS X is calling.

2. To answer the intercom call, press ,

, INT or any dialing key (0-9,

or ) on the destination

handset. Both handsets now display

Intercom.

3. To end the intercom call, press OFF

or place the handset back in the

telephone base or charger.

NOTE

• To cancel the intercom call before it is

answered, press OFF or INT.

• Press OFF or MUTE on the destination

handset to temporarily silence the intercom

ringer.

• If the destination handset does not answer

the intercom call within 100 seconds, is on

a call or out of range, the originating

handset displays Unable to call and

returns to idle mode.

• If there is an incoming call while the

originating handset displays Calling HS X,

the intercom request will be stopped and

the screen displays Incoming call.

• You can use four handsets on two pairs

of intercom calls. For example, when four

handsets are used on two pairs of intercom

calls, use the fifth handset for an outside call.

Answer an incoming call during

an intercom call

When you receive an outside call during

an intercom call, there is an alert tone.

• To answer the outside call, press .

The intercom call ends automatically.

• To end the intercom call without

answering the outside call, press

OFF. The telephone continues to

ring.

Call transfer using intercom

Use the intercom feature to transfer an

outside call to another system handset.

1. During a call, press INT.

• If you have two handsets, the

outside call is put on hold and your

handset displays Calling HS X.

• If you have three or more

handsets, your handset displays

Intercom to. Use the dialing keys

to enter a handset number. The

outside call is put on hold and your

handset displays Calling HS X.

The destination handset rings and its

screen displays HS X is calling.

2. To answer the intercom call on the

destination handset, press , , INT or

any dialing key (0-9, , or ).

The outside call is still on hold and both

handsets now display Intercom. Yo u

can now have a private conversation

with the destination handset.

La page charge ...

VTech CS5219-3 Manuel utilisateur

Marque: VTech

Modèle: CS5219-3

Catégorie: Téléphones

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: VTech CS5219-3 User manual

VTech CS5219-3 Manuel utilisateur

Ce manuel convient également à

VTech CS5219-3 Manuel utilisateur

dans d''autres langues

Documents connexes