Micron AT-NG5 Manuel utilisateur

AT-NG5
Micron
Marque
Micron
Modèle
AT-NG5
Taper
Manuel utilisateur
1
Tracker
AT-NG5
User Manual
Revision: 1.00
Document Title
AT-NG5 User manual
Version
1.00
Finale Date
2022-08-10
Status
Released
Document Control ID
TRACKER AT-NG5
2
Contents
1 Introduction ......................................................................................................................................3
2 Product Overview ............................................................................................................................ 3
2.1 Appearance ............................................................................................................................3
2.2 LED Description ...................................................................................................................4
3 Getting Started ................................................................................................................................. 5
3.1 Parts List ............................................................................................................................... 5
3.2 How GPS position Fix ..........................................................................................................5
3.3 Insert SIM Card .................................................................................................................... 6
3.4Device Power on ...................................................................................................................6
4 Trouble shooting and Safety info .................................................................................................... 7
4.1 Trouble shooting ...................................................................................................................7
4.2 Safety info .............................................................................................................................7
3
1 Introduction
AT-NG5 use lithium battery. it is a powerful GPS locator which is designed for vehicle, and
assets tracking . With superior receiving sensitivity, Its location can be real time or schedule
tracked by backend server or specified terminals. Based on the embedded wireless tracking
protocol, AT-NG5 can communicate with the backend server through LTE Cat-M and NB-IoT
network, and transfer reports of emergency, Geo-fencing, device status and scheduled GPS
position etc… Service provider is easy to setup their tracking platform based on the functional
wireless tracking protocol.
The WIFI function will be activated and report the MAC addresses once the device is in
alerting state.
2 Product Overview
2.1 Appearance
Figure 2-1
4
2.2 LED Description
Figure 2-2
There is one tricolour LED lights in AT-NG5 device, the description as following.
Light
Event
State
LED show blue
GPS fixed
Solid
LED show red
low power
Solid
5
3 Getting Started
3.1 Parts List
Name
Picture
AT-NG5
3.2 How GPS position Fix
Your device has an unobstructed view of the sky,lying face up,so it can obtain the initial
GPS Fix
Figure 3-1
6
3.3 Insert SIM Card
Figure 3-4
3.4 Device Power on
Long press the power button for 4 seconds, and the device will start when the red and
blue light lights up
Figure 3-5
7
4 Trouble shooting and Safety info
4.1 Trouble shooting
4.2 Safety info
The following items are suggestion for safety use, please pay more attention.
Please do not disassemble the device by yourself.
Please do not put the device on the overheating or too humid place, avoid exposure
to direct sunlight. Too high temperature will damage the device or even cause the
battery explosion.
Please do not use AT-NG5 on the airplane or near medical equipment.
Trouble
Possible Reason
Solution
Messages can’t be
reported to the
backend server by
Mobile network.
APN is wrong. Some
APN can not visit the
internet directly.
Ask the network operator for the right
APN.
The IP address or port of
the backend server is
wrong.
Make sure the IP address for the
backend server is an identified address
in the internet.
Unable to power
off AT-NG5.
The function of power key
was disabled by
AT+GTFKS.
Enable the function of power key by
AT+GTFKS.
Battery can not be
charged
The battery has not been
used for too long time and
has been locked.
Using a external power source with
3.65V DC power supply to active the
battery or apply for after sale help.
AT-NG5 can’t fix
GPS successfully.
The GPS signal is weak.
Please move AT-NG5 to a place with
open sky.
It is better to let the top surface face to
the sky. (The same surface with
indication LED)
8
The following warning statements
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Exposure to Radio Frequency Radiation. This equipment must be installed and operated in
accordance with provided instructions, and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons and must not be
collocated or operating in conjunction with any other antenna or transmitter.
This device complies with Industry Canada RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) il ne doit pas produire de brouillage et
(2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible de compromettre le fomctionnement du dispositif.
The distance between user and products should be no less than 20cm
La distance entre l'utilisateur et les produits ne doit pas être inférieure à 20 cm
- This Class B digital apparatus complies with Canadian ICES-003.
- Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Micron AT-NG5 Manuel utilisateur

AT-NG5
Micron
Marque
Micron
Modèle
AT-NG5
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Autres documents