SportsArt G886 Le manuel du propriétaire

G886 OWNER’S MANUAL CONTENTS

1. INTRODUCTION ............................................................................. 2

2. SAFETY PRECAUTIONS ................................................................ 3

3. LIST OF PARTS ............................................................................... 8

4. ASSEMBLE THE PRODUCT ........................................................... 10

STEP 1 Prepare for Assembly ............................................................. 10

STEP 2 Install the Main Frame ............................................................ 12

STEP 3 Move the Product into Place ................................................... 14

STEP 4 Level the Product .................................................................... 15

STEP 5 Install the Front Support Assembly ......................................... 16

STEP 6 Place the Mat .......................................................................... 17

STEP 7 Install the Power Cord ............................................................ 18

STEP 8 Unit Inspection ........................................................................ 19

STEP 9 Beware of Moving Parts .......................................................... 20

5. UNDERSTAND THE G886 DISPLAY .............................................. 21

DISPLAY Overview .............................................................................. 21

DISPLAY Keys ..................................................................................... 21

DISPLAY Exercise Feedback Window ................................................. 23

DISPLAY Specications ....................................................................... 24

6. OPERATE THE PRODUCT ............................................................. 25

OPERATION Safety Operating Area ................................................... 25

OPERATION Safety Get On/Off .......................................................... 26

OPERATION Proper Workout Position ................................................ 27

OPERATION Assistive Handle Switch ................................................. 28

OPERATION Start Screen ................................................................... 29

OPERATION Quick Start ..................................................................... 29

OPERATION Start a Workout Program ............................................... 30

OPERATION Display ........................................................................... 32

OPERATION Pause ............................................................................ 33

OPERATION Cool Down ..................................................................... 33

OPERATION Idle Mode ....................................................................... 33

OPERATION Energy Smart Function .................................................. 33

OPERATION Workout Programs ......................................................... 34

OPERATION REVIEW SUMMARY ...................................................... 40

OPERATION User Preferences and Component Versions................... 40

7. ABOUT HEART RATE DETECTION ................................................ 42

HEART RATE Telemetry ...................................................................... 42

HEART RATE Contact ......................................................................... 42

8. GUIDELINES FOR EXERCISE ....................................................... 43

9. MICRO INVERTER ......................................................................... 44

MICRO INVERTER Important Safety Instructions ............................... 44

MICRO INVERTER Cautionary Messages .......................................... 44

MICRO INVERTER Electronic Specications ...................................... 46

MICRO INVERTER Circuit Board & Product Settings ......................... 47

G886 OWNER’S MANUAL CONTENTS

10. MAINTENANCE ............................................................................. 49

MAINTENANCE Safety Precautions ................................................... 49

MAINTENANCE Error Messages ......................................................... 50

MAINTENANCE Circuit Breaker .......................................................... 52

MAINTENANCE Disassemble the Product .......................................... 53

MAINTENANCE Schedule ................................................................... 56

MAINTENANCE Task List .................................................................... 57

MAINTENANCE One-Year Maintenance Log ...................................... 58

11. ACCESSORIES .............................................................................. 59

ACCESSORIES Entertainment Cap .................................................... 60

ACCESSORIES MYE Wireless TV Audio_Channel Receivers ........... 61

ACCESSORIES Options ..................................................................... 62

12. APPENDIXES ................................................................................ 63

APPENDIXES Specications ............................................................... 63

APPENDIXES Electronics Block Diagram ........................................... 64

*We reserve the right to revise this manual at any time without notice.

2

1. INTRODUCTION

Congratulations on your purchase of one of the nest exercise products on the

market today, the SportsArt VERSO ECO-POWR™ G886 3-in-1 Cross Trainer.

Constructed of high quality materials and designed for years of reliable usage,

this product was made to become an integral part of your commercial tness

venue.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of

this product will help ensure that exercisers obtain their tness goals safely and

successfully.

3

2. SAFETY PRECAUTIONS

Your SportsArt 3-in-1 Cross Trainer was designed and built for optimum safety.

However certain precautions apply whenever you use your 3-in-1 Cross Trainer.

Please read the entire manual before assembly and operation. Also, please note the

following safety precautions:

● Please read the instructions carefully and install the cross trainer as instructed.

● Assemble and operate the cross trainer on a solid, level surface. DO NOT use

outdoors or near water.

● Check the cross trainer before every use. Make sure all parts are assembled, and

all fasteners are tightened. DO NOT use the cross trainer if the unit is disassembled

in any way.

● Keep your hands away from moving parts.

● Wear proper workout clothing; DO NOT wear loose clothing. DO NOT wear

shoes with leather soles or high heels. Tie all long hair back. DO NOT go barefoot

on this product.

● Be careful when mounting and dismounting the unit.

● The cross trainer may or may not stop immediately if an object becomes caught

or impedes normal motion.

● Do not use accessories or parts that are not specically recommended by the

manufacturer (SportsArt). Such parts might cause injuries or cause the unit to fail

and void the warranty. We will not be responsible for any safety issue that arises

due to the misuse of accessories or parts. At the same time, we will terminate the

warranty terms of this equipment.

● Close supervision is necessary when this cross trainer is used by, on, or near

children 12 or younger, invalids, or disabled persons.

● Use this cross trainer only for its intended use as described in this manual.

● Never operate this cross trainer if it has been damaged in any way. If it is not

working properly, or has been dropped or damaged, contact your dealer.

● Keep all air ventilation areas free of blockage.

● Never drop or insert any object into any opening.

● DO NOT operate where aerosol (spray) products are being used or where oxygen

is being administered.

● The general user weight limit for this cross trainer is 227kg (500lb).

● This cross trainer is not intended for use by persons (including children 12

or younger) with reduced physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they have been given supervision or

instruction concerning use of this cross trainer by a person responsible for

their safety.

4

2. SAFETY PRECAUTIONS (CONTINUED)

● Children 12 or younger should be supervised to ensure that they do not

play on or near the product..

● Maintenance and repair must be performed by trained service personnel

only. Improper maintenance would not only damage the machine, but also

may present a danger to the exerciser.

● Warning that any of the adjustment devices that could interfere with the

user’s movement should not be left projecting.

● It is not suitable for therapeutic purposes.

● “WARNING — This stationary training equipment is not suitable for high

accuracy purposes.”

Caution

If you feel any pain or abnormal sensation, STOP YOUR WORKOUT and

consult your physician immediately. Work within your recommended exer-

cise level. DO NOT work to exhaustion.

Before beginning any exercise program, you should consult with your doc-

tor. It is recommended that you undergo a complete physical examination.

DO NOT step onto the highest footplate. While holding onto supports for

stability, step onto the lowest footplate.

Note: This equipment has been tested and found to comply with the limits

for a digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particu-

lar installation. If the user desires to correct such interference, it is at the

user’s own expense.

Warning

Heart rate monitoring systems may be inaccurate. Over exercise may

result in serious injury or death. If you feel faint, stop exercise immediately

and consult a medical physician.

5

AVERTISSEMENT:

Lire le mode d 'emploi ava nt utilisat ion. Ne pas laisser les enfants su r ou à prox imité

du produit. Po ur réduire le risque d e blessure, se tenir su r les rails latéraux a vant de dém arrer le t apis

roulant. Pour réduire le risque de b lessures ca usées par de s pièces en mouvement ou de choc

électrique, dé branchez-le tapis roul ant avant d e le nettoy er ou de l'e ntretenir.

ATTENTION!

Les systèmes d e surveilla nce de la f réquence ca rdiaque peuv ent être in exacts. L'e xercice

excessif peut entraîner d es blessure s graves ou la mort. Si vous vous sentez faib le, cessez

immédiatement de vous ent raîner. Tou jours fixer le clip de sécurité su r les vêtem ents avant utilisation .

AVERTISSEMENT:

Lire le mode d'emploi avant utilisation. Ne pas laisser les enfants sur ou à proximité

du produit. Pour réduire le risque de blessure, se tenir sur les rails latéraux avant de démarrer le tapis

roulant. Pour réduire le risque de blessures causées par des pièces en mouvement ou de choc

électrique, débranchez-le tapis roulant avant de le nettoyer ou de l'entretenir.

ATTENTION!

Les systèmes de surveillance de la fréquence cardiaque peuvent être inexacts. L'exercice

excessif peut entraîner des blessures graves ou la mort. Si vous vous sentez faible, cessez

immédiatement de vous entraîner. Toujours fixer le clip de sécurité sur les vêtements avant utilisation.

2. SAFETY PRECAUTIONS (CONTINUED)

If you are a French speaking person in North America, please place the

following label contained in the owner’s manual on the console as shown.

Customers outside of North America will not receive this French warning

label.

(Note: If there are any other warning labels contained in the owner’s manual,

please place them on the clearly displayed location on the console as well.)

6

• Votre cross trainer SportsArt a été conçu et fabriqué an d’assurer une

sécurité optimale. Cependant certaines précautions s’appliquent chaque

fois que vous utilisez votre tapis de course.

• Lisez entièrement le manuel avant l’assemblage et l’utilisation. Veuillez

aussi noter les consignes de sécurité suivantes:

• Veuillez lire attentivement les instructions et installer cross trainer selon

les instructions.

• Assemblez et faites fonctionner cross trainer sur une surface solide et

plane; NE PAS l’utiliser à l’extérieur ou près de l’eau.

• En aucun cas, ne laissez des enfants à proximité ou sur cross trainer .

• Vériez cross trainer avant chaque utilisation. Assurez-vous que toutes

les pièces sont assemblées et que tous les éléments de xation sont

serrés. NE PAS utiliser cross trainer si l’appareil est démonté de quelque

façon.

• Gardez vos mains loin des pièces mobiles.

• Portez des vêtements d’entraînement appropriés; NE PORTEZ PAS de

vêtements amples. NE PORTEZ PAS de chaussures à semelles en cuir

ou à talons hauts. Attachez les cheveux longs. Ne marchez pas pieds nus

sur l’appareil.

• Soyez prudent lors du montage et démontage de l’appareil.

• Cross trainer peut s’arrêter ou ne s’arrêter pas immédiatement si quelque

chose obstacle le mouvement.

• NE PAS utiliser d’accessoire non spéciquement recommandé par le

fabricant. Car cela pourraient provoquer des blessures ou entraîner une

panne de l’appareil.

• Débranchez l’appareil de la prise avant l’entretien ou la suppression de

toute pièce.

• Une surveillance étroite est nécessaire quand cross trainer est utilisé

par ou à proximité d’enfants, de malades ou de personnes handicapées.

• Utilisez cross trainer uniquement pour l’usage prévu dans ce manuel.

• N’utilisez jamais cross trainer s’il a été endommagé de quelque façon

que ce soit. S’il ne fonctionne pas correctement, ou s’il est tombé ou en-

dommagé, contactez votre vendeur.

• NE PAS transporter cross trainer par le cordon d’alimentation et

n’utilisez pas le cordon comme poignée.

• Maintenez le cordon éloigné de toute surface chaude.

• Veillez à ce qu’aucun orice de ventilation ne soit obstrué.

• Ne faites jamais tomber ou n’insérez jamais d’objet dans les orices.

• NE PAS l’utiliser là où des produits aérosols (vaporisés) sont utilisés ou

lorsque de l’oxygène est administré.

• La limite de poids de l’utilisateur pour cet cross trainer est de 227 Kgs

(500 lbs).

• Les enfants doivent être encadrés an d’empêcher qu’ils ne jouent avec

cross trainer.

2. CONSIGNES DE SÉCURITÉ

7

2. CONSIGNES DE SÉCURITÉ (SUITE)

ATTENTION

Si vous ressentez une douleur ou si vous avez une sensation anormale,

ARRÊTEZ VOTRE ENTRAÎNEMENT et consultez immédiatement votre médecin.

Entraînez-vous à votre niveau d’exercice recommandé. NE PAS s’entraîner jusqu’à

l’épuisement.

Avant de commencer un programme d’exercice, vous devriez consulter votre

médecin. Il est recommandé de faire un examen physique complet.

NE PAS monter sur l’étape plus haute. En maintenant sur les supports de stabilité,

monter sur l’ étape plus bas.

Pour diminuer le risque de choc électrique, débranchez toujours ce vélo de course

de la prise de courant, immédiatement après utilisation et avant le nettoyage.

Un branchement incorrect du connecteur de mise à la terre de l’équipement risque

d’entraîner un choc électrique. En cas de doute sur la mise à la terre correcte de

vélo, faites appel à un technicien ou un électricien qualié. NE PAS modier la che

fournie avec cross trainer, si elle ne correspond pas à la prise, faites installer une

prise adéquate par un technicien qualié.

Remarque: Ce matériel a été testé et déclaré conforme aux normes des appareils

digitaux de, conformément à la partie 15 du Règlement de la FCC. Ces limites sont

conçues pour offrir une protection raisonnable contre les interférences nuisibles dans

une installation résidentielle. Cet appareil génère, utilise, et peut diffuser des signaux

radioélectriques, et, s’il n’est pas installé et utilisé conformément aux instructions,

peut provoquer des interférences nuisibles aux communications radio. Cependant,

il n’y a aucune garantie que des interférences ne se produiront pas dans une instal-

lation particulière.

Si l’utilisateur désire corriger les interférences, ces corrections seront à la charge de

l’utilisateur.

Dans ce manuel, les mots “gauche” et “droit” sont utilisés en référence aux pièces et

au produit. Comme tels, les mots “gauche” et “droit” font respectivement référence

aux côtés gauche et droit de l’exerciseur. De même pour plus de concision, le

mot est utilisé dans certains cas où des rondelles, des vis et autres matériels sont

associés.

ATTENTION!

Les systèmes de surveillance de la fréquence cardiaque peuvent s’avérer imprécis.

Un entraînement excessif risque de nuire sérieusement à la santé ou d’entraîner la

mort. En cas d’étourdissement, arrêtez immédiatement l’entraînement.

8

3. LIST OF PARTS

Assembly Parts

No. Name Qty. No. Name Qty.

A1 Main frame 1 A9 Hardware kit 1

A2 Front support assembly 1 A10 Mat 1

A3

Right pedestal side

cover

1 A11

Left support tube end

cap

1

A4 Owner’s manual 1 A12

Right support tube end

cap

1

A5 Pivot cover 2 A13 Left PU handle 1

A6

Right footplate

assembly

1 A14 Right PU handle 1

A7 Left footplate assembly 1 A15 Left joint cover 2

A8 Left pedestal side cover 1 A16 Right joint cover 2

A1

A3

A5

A14

A16

A15

A13

A8

A2

A10

A4

A9

A7

A11

A12

A6

9

Components in the Hardware Kit

No. Name Qty. Specication Notes

12

Mushroom head Phillips self

tapping screw

12 M4*L12

13

Round head Phillips screw 4 M5*P0.8*L10

Soft cap 4

Screwdriver bit 1 Flat and Phillips

L-shaped Allen wrench 2 M5

T-shaped Allen wrench 1 M4

Double open-end wrench 1 8*17mm

Ground wire 1

Yellow/Green

L1500

Components on the Product

No. Name Specication Notes

31

Flat head hex socket screw M8*P1.25*L20

Flat Washer M8

Axle B

33

Flat head hex socket screw M8*P1.25*L20

Flat Washer M8

Axle C

35 Round head hex socket screw M5*P0.8*L12

36 Anti-slip insert

37 Mushroom head Phillips screw M5*P0.8*L12

3. LIST OF PARTS (CONTINUED)

10

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual

the words “left” and “right” are used to refer to the product and its parts.

As such, these designations correspond to the “left” and “right” sides of a

person in position to exercise on this product. Also, for brevity, the word

“screws” is used where screws, washers, and other hardware may be

involved.

STEP 1 Prepare for Assembly

Please follow instructions (a) through (f) to prepare for assembly.

(a) Remove the cover (AB) and then take out the carton (AA), front support

assembly (A2) and the right/left footplate assembly (A6) (A7).

(b) Remove the set pin attached to the main frame and then secure the

front support assembly (A2) to the main frame with the set pin as

shown.

(c) Remove screws at the rear of the main frame (A1) attached to the pallet.

A7

A2

AA

AB

A6

A1

(a)

(c)

(b)

11

STEP 1 Prepare for Assembly (Continued)

(d) Remove screws from the main frame (A1) attached to the pallet.

(e) Grasp the pallet and then have two people to grasp the front support

assembly (A2) with both hands and rotate the main frame

counterclockwise to move it out of the pallet as shown.

(f) Remove the front support assembly (A2) to move the main frame into

position as desired.

(Note: For safety, four people are required for this procedure.)

A2

(d)

(e)

(f)

12

(a)

A13

A14

A6

A7

A16

(b)

31

12

A5

13

33

35

A15

31

12

33

STEP 2 Install the Main Frame

Please follow instructions (a) through (d) to install the main frame.

(a) Handle installation:

Remove screws (35) from the main frame as shown. Insert the left PU

handle (A13) and press the left PU handle (A13) forward slightly when

securing screws (35). (Note: Repeat the same procedure to install the

right PU handle (A14).)

(b1) Footplate assembly installation: First, remove the axles (31) (33) from

the stride arms as shown. Install the left footplate assembly (A7) and

then secure it with the axles (31) (33). (Note: Repeat the same

procedure to install the right footplate assembly (A6).

(b2) Secure the left/right joint inner cover (A15) (A16) with screws (12) and

then press the left/right joint exterior cover into place.

(b3) Secure the pivot right cover with screws (12) and then press the pivot

left cover into place and secure with screws. Finally insert the soft

cap (13) as shown. (Note: Make sure to secure the right cover rst.)

13

Warning: Consult the manual and follow all assembly

instructions carefully. Please note that incorrect assembly

may present a danger to the exercise, will damage the

product and void the warranty.

STEP 2 Install the Main Frame (Continued)

(c) Press the left/right pedestal side cover (A8) (A3) into place as shown.

(d) Remove the last anti-slip insert (36) from the main frame and then

remove screws (37). Set the left support tube end cap (A11) into place

and then press it forward slightly when securing with screws (37). Finally

press the last anti-slip insert (36) back into place.

(Note: Repeat the same procedure to install the right support tube end cap

(A11).

A8

A3

A11

A12

36

(c)

(d)

37

14

STEP 3 Move the Product into Place

(Note: For safety, two people are required for this procedure.)

Stand on the left and right sides. Grip the handle in area A with one hand,

another hand on the left/right support tube as shown). Simultaneously lift the

unit and roll it into place for use. (Note: Be careful to avoid pinching fingers

when moving the product or setting it down.)

15

STEP 4 Level the Product

For the user’s safety and the proper functioning of the product, this 3-in-1

cross trainer must sit level on a flat floor. If necessary, adjust the levelers by

following instructions (a) through (c) below.

(a) Loosen the leveler nut.

(b) Rotate the leveler foot downward so it firmly touches the floor.

(c) To secure this position, secure the leveler nut upward against the product

frame.

a

b

c

16

STEP 5 Install the Front Support Assembly

Remove the set pins (33) attached to the main frame and then secure the

front support assembly (A2) to the main frame with the set pins (33) as

shown.

(Note: Make sure to remove the front support assembly that is for the

safety before moving the product.)

17

STEP 6 Place the Mat

Place the mat (A10) as shown below.

18

124

STEP 7 Install the Power Cord

(a) Insert the power cord plug into the connector on the product.

(b) Secure power cord connector screws (124) and then insert the other end

of the power cord into the appropriate power supply socket in the wall.

19

STEP 8 Unit Inspection

After completing the assembly, please follow instructions (a) through (b)

below to inspect the unit.

(a) Before plugging the power cord, make sure the unit is steady and on a

level surface. If the unit is not steady, make adjustments according to the

instructions “Level the product” of this manual.

(b) After plugging the power cord, operate the control panel to test and

ensure that the unit is working properly. If the unit cannot be operated

after the power on, please check the connection and the fuse. Consult an

experienced technician from SportsArt for help with any questions.

La page est en cours de chargement...

SportsArt G886 Le manuel du propriétaire

SportsArt G886 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents