SportsArt S775 Le manuel du propriétaire

S775 OWNER’S MANUAL CONTENTS

1. INTRODUCTION .............................................................................. 2

2. SAFETY PRECAUTIONS ................................................................ 3

3. LIST OF PARTS ............................................................................... 7

4. ASSEMBLE THE PRODUCT ........................................................... 10

STEP 0 Prepare for Assembly ............................................................. 10

STEP 1 Install the Rear Adjustment Base ........................................... 11

STEP 2 Install the Left and Right Glide Track ...................................... 13

STEP 3 Install the Belts ........................................................................ 18

STEP 4 Install the Display Neck and Pedestal Assembly .................... 20

STEP 5 Install the Pedestal Assembly and the Main Frame ................ 25

STEP 6 Install the Left and Right Support ........................................... 26

STEP 7 Install the Covers .................................................................... 27

STEP 8 Moving the Unit ....................................................................... 30

STEP 9 Leveling the Unit ..................................................................... 31

STEP 10 Install the Left and Right Support Lower Cover .................... 32

STEP 11 Install the Bottle Holder ......................................................... 33

STEP 12 How to Connect the Ground Wire ......................................... 34

STEP 13 Unit Inspection ...................................................................... 35

5. UNDERSTAND THE S775 DISPLAY ............................................... 36

DISPLAY Overview .............................................................................. 36

DISPLAY Specications ....................................................................... 37

DISPLAY Windows ............................................................................... 37

DISPLAY Keys ...................................................................................... 37

6. OPERATE THE PRODUCT ............................................................. 39

OPERATION Quick Start ..................................................................... 39

OPERATION Start a Workout Program ............................................... 39

OPERATION Display ........................................................................... 39

OPERATION Cool Down ..................................................................... 41

OPERATION Workout Programs ......................................................... 41

OPERATION User Preferences and Component Versions................... 44

7. ABOUT HEART RATE DETECTION ................................................ 45

HEART RATE Telemetry ...................................................................... 45

HEART RATE Contact ......................................................................... 45

8. GUIDELINES FOR EXERCISE ....................................................... 46

9. ACCESSORIES ............................................................................... 47

ACCESSORIES Entertainment Cap .................................................... 48

ACCESSORIES MYE Wireless TV Audio_Channel Receivers ............ 49

10. MAINTENANCE ............................................................................. 51

MAINTENANCE Messages .................................................................. 51

MAINTENANCE Lubrication ................................................................ 52

MAINTENANCE Inspect Belt ............................................................... 53

MAINTENANCE Schedule ................................................................... 54

MAINTENANCE Task List (Pinnacle Trainer) ....................................... 55

MAINTENANCE One-Year Maintenance Log ...................................... 56

MAINTENANCE Electronics Block Diagram ........................................ 57

2

1. INTRODUCTION

Congratulations on your purchase of one of the nest exercise products on the

market today, the SportsArt S775 pinnacle trainer. Constructed of high quality

materials and designed for years of reliable usage, this product was made to

become an integral part of your commercial tness venue.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of

this product will help ensure that exercisers obtain their tness goals safely and

successfully.

L

R

3

2. SAFETY PRECAUTIONS

Your SportsArt pinnacle trainer was designed and built for optimum safety. However

certain precautions apply whenever you use your pinnacle trainer.

Please read the entire manual before assembly and operation. Also, please note the

following safety precautions:

● Please read the instructions carefully and install the pinnacle trainer as instructed.

● Assemble and operate the pinnacle trainer on a solid, level surface. DO NOT use

outdoors or near water.

● Never allow children on or near the pinnacle trainer.

● Check the pinnacle trainer before every use. Make sure all parts are assembled,

and all fasteners are tightened. DO NOT use the pinnacle trainer if the unit is

disassembled in any way.

● Keep your hands away from moving parts.

● Wear proper workout clothing; DO NOT wear loose clothing. DO NOT wear

shoes with leather soles or high heels. Tie all long hair back. DO NOT go barefoot

on this product.

● Be careful when mounting and dismounting the unit.

● The pinnacle trainer may or may not stop immediately if an object becomes

caught or impedes normal motion.

● DO NOT use any accessories that are not specically recommended by the

manufacturer. Such parts might cause injuries or cause the unit to fail.

● Close supervision is necessary when this pinnacle trainer is used by, on, or near

children, invalids, or disabled persons.

● Use this pinnacle trainer only for its intended use as described in this manual.

● Never operate this pinnacle trainer if it has been damaged in any way. If it is not

working properly, or has been dropped or damaged, contact your dealer.

● Keep all air ventilation areas free of blockage.

● Never drop or insert any object into any opening.

● DO NOT operate where aerosol (spray) products are being used or where oxygen

is being administered.

● The general user weight limit for this pinnacle trainer is 227kg (500lb). Note that

at resistance level 40 this product meets standards for users of up to 150kg (330lb).

● This pinnacle trainer is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of this pinnacle trainer by a person responsible for their

safety.

● Children should be supervised to ensure that they do not play with the

pinnacle trainer.

4

2. SAFETY PRECAUTIONS (CONTINUED)

Caution

If you feel any pain or abnormal sensation, STOP YOUR WORKOUT and

consult your physician immediately. Work within your recommended exer-

cise level. DO NOT work to exhaustion.

Before beginning any exercise program, you should consult with your doc-

tor. It is recommended that you undergo a complete physical examination.

DO NOT step onto the highest footplate rst. While holding onto supports

for stability, step onto the lowest footplate.

Note: This equipment has been tested and found to comply with the limits

for a digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particu-

lar installation. If the user desires to correct such interference, it is at the

user’s own expense.

Warning

Heart rate monitoring systems may be inaccurate. Over exercise may

result in serious injury or death. If you feel faint, stop exercise immediately

and consult a medical physician.

5

2. CONSIGNES DE SÉCURITÉ IMPORTANTES

• Votre pinnacle croix trainer SportsArt a été conçu et fabriqué an

d’assurer une sécurité optimale. Cependant certaines précautions

s’appliquent chaque fois que vous utilisez votre pinnacle croix trainer de

course.

• Lisez entièrement le manuel avant l’assemblage et l’utilisation. Veuillez

aussi noter les consignes de sécurité suivantes:

• Veuillez lire attentivement les instructions et installer l’ pinnacle croix

trainer de course selon les instructions.

• Assemblez et faites fonctionner l’ pinnacle croix trainer sur une surface

solide et plane; NE PAS l’utiliser à l’extérieur ou près de l’eau.

• En aucun cas, ne laissez des enfants à proximité ou sur l’ pinnacle croix

trainer.

• Vériez l’ pinnacle croix trainer de course avant chaque utilisation.

Assurez-vous que toutes les pièces sont assemblées, et que tous les élé-

ments de xation sont serrés. NE PAS utiliser l’ pinnacle croix trainer de

course si l’appareil est démonté de quelque façon.

• Gardez vos mains loin des pièces mobiles.

• Portez des vêtements d’entraînement appropriés; NE PORTEZ PAS de

vêtements amples. NE PORTEZ PAS de chaussures à semelles en cuir

ou à talons hauts. Attachez les cheveux longs. Ne marchez pas pieds nus

sur l’appareil.

• Soyez prudent lors du montage et démontage de l’appareil.

• Le pinnacle croix trainer peut s’arrêter ou ne s’arrêter pas immédiate-

ment si quelque chose obstacle le mouvement.

• NE PAS utiliser d’accessoire non spéciquement recommandé par le

fabricant. Car cela pourraient provoquer des blessures ou entraîner une

panne de l’appareil.

• Une surveillance étroite est nécessaire quand l’ pinnacle croix trainer

est utilisé par ou à proximité d’enfants, de malades ou de personnes hand-

icapées.

• Utilisez l’ pinnacle croix trainer de course uniquement pour l’usage

prévu dans ce manuel.

• N’utilisez jamais l’ pinnacle croix trainer de course s’il a été endommagé

de quelque façon que ce soit. S’il ne fonctionne pas correctement, ou s’il

est tombé ou endommagé, contactez votre vendeur.

• Veillez à ce qu’aucun orice de ventilation ne soit obstrué.

• Ne faites jamais tomber ou n’insérez jamais d’objet dans les orices.

• NE PAS l’utiliser là où des produits aérosols (vaporisés) sont utilisés ou

lorsque de l’oxygène est administré.

• La limite de poids de l’utilisateur pour cet l’ pinnacle croix trainer est de

227 Kgs (500 lbs). Remarquez que la résistance de 40 convient jusqu’à

150kgs (330 lbs).

• NE PAS transporter l’ pinnacle croix trainer de course par le cordon

d’alimentation et n’utilisez pas le cordon comme poignée.

• Maintenez le cordon éloigné de toute surface chaude.

• Débranchez l’appareil de la prise avant l’entretien ou la suppression de

toute pièce.

6

2. CONSIGNES DE SÉCURITÉ (SUITE)

• Pour diminuer le risque de choc électrique, débranchez toujours ce l’

pinnacle croix trainer de course de la prise de courant, immédiatement

après utilisation et avant le nettoyage.

Ce pinnacle croix trainer n’est pas destiné à être utilisé par des personnes (y compris

des enfants) dont les capacités physiques, sensorielles ou mentales sont réduites

ou qui ne disposent pas de l’expérience ou du savoir nécessaires, sauf si celles-ci

ont au préalable été formées eu égard à l’utilisation de ce pinnacle croix trainer par

une personne responsable de leur sécurité. Les enfants doivent être encadrés an

d’empêcher qu’ils ne jouent avec l’ pinnacle croix trainer.

ATTENTION

Si vous ressentez une douleur ou si vous avez une sensation anormale,

ARRÊTEZ VOTRE ENTRAÎNEMENT et consultez immédiatement votre médecin.

Entraînez-vous à votre niveau d’exercice recommandé. NE PAS s’entraîner jusqu’à

l’épuisement.

Avant de commencer un programme d’exercice, vous devriez consulter votre

médecin. Il est recommandé de faire un examen physique complet.

Remarque: Ce matériel a été testé et déclaré conforme aux normes des appareils

digitaux de Classe B, conformément à la partie 15 du Règlement de la FCC. Ces

limites sont conçues pour offrir une protection raisonnable contre les interférences

nuisibles dans une installation résidentielle. Cet appareil génère, utilise, et peut

diffuser des signaux radioélectriques, et, s’il n’est pas installé et utilisé conformément

aux instructions, peut provoquer des interférences nuisibles aux communications

radio. Cependant, il n’y a aucune garantie que des interférences ne se produiront

pas dans une installation particulière.

Si l’utilisateur désire corriger les interférences, ces corrections seront à la charge de

l’utilisateur.

Dans ce manuel, les mots “gauche” et “droit” sont utilisés en référence aux pièces et

au produit. Comme tels, les mots “gauche” et “droit” font respectivement référence

aux côtés gauche et droit de l’exerciseur. De même pour plus de concision, le

mot est utilisé dans certains cas où des rondelles, des vis et autres matériels sont

associés.

ATTENTION!

Les systèmes de surveillance de la fréquence cardiaque peuvent s’avérer imprécis.

Un entraînement excessif risque de nuire sérieusement à la santé ou d’entraîner la

mort. En cas d’étourdissement, arrêtez immédiatement l’entraînement.

• Un branchement incorrect du connecteur de mise à la terre de

l’équipement risque d’entraîner un choc électrique. En cas de doute sur

la mise à la terre correcte de l’ pinnacle croix trainer, faites appel à un

technicien ou un électricien qualié. NE PAS modier la che fournie avec

l’elliptique, si elle ne correspond pas à la prise, faites installer une prise

adéquate par un technicien qualié.

• Les enfants doivent être encadrés an d’empêcher qu’ils ne jouent avec

l’ pinnacle croix trainer.

7

3. LIST OF PARTS

Assembly Parts

No. Name Qty. No. Name Qty.

A1 Display neck assembly 1 A10 Left support lower cover 1

A2 Pedestal assembly 1 A11 Right support lower cover 1

A3 Main frame 1 A12 Feeder cord 1

A4 Right glide track 1 A13 Right handle cover 1

A5 Left glide track 1 A14 Left handle cover 1

A6 Rear adjustment base 1 A15 Connecting board 1

A7 Right support 1 A16 Right pedal 1

A8 Left support 1 A17 Left pedal 1

A9 Front cover 1 A18 Bottle holder 1

8

Components in the Hardware Kit

No. Name Qty. Specication Notes

30 Cover cap 3

31 Mushroom top Phillips screw 20 M4*L16

32 Phillips screw 4 M5*L15

33 Ground wire 1

Screw socket 20

L shaped Allen wrench 1 (M4)

L shaped Allen wrench 1 (M5)

L shaped Allen wrench 1 (M6)

Double open end wrench 2 (13*17)

Double open end wrench 1 (17*23)

T shaped Allen wrench 1 (M5)

Screwdriver shank 1 Phillips and at

Components on the Product

No. Name Specication Notes

51 Right rear cover

52 Mushroom top Phillip screw M4*L16

53 Rear footplate

54 Left rear cover

56

Inner hex screw M8*P1.25*L25

Serrated washer D22*d8.5*t2.0*28T

57

Hex head screw M8*P1.25*L100

Flat washer D17*d8.3*t2

Bushing ØD12*d8*L82

58 Left/Right mount

59 Cover cap ØD23*t8.8

60 Front cover

61 Mushroom top Phillip screw M4*L16

62 Top cover

3. LIST OF PARTS (CONTINUED)

9

Components on the Product

No. Name Specication Notes

63

Nylon hex lock nut M10

Flat washer D26*d10.5*t3

Axle F M10*L60

64

Axle C M10*L78

Bushing B ØD20*d12.2*L14.5

Nylon hex lock nut M10

65 Fan cover

66 Mushroom top Phillip screw M4*L16

67 Bevelled head inner hex screw M6*L15

68 Pedestal cover

69 Mushroom top Phillip screw M4*L16

70

Inner hex screw M8*P1.25*L25

Serrated washer D18*d8.5*t2.0*19T

71 Connecting board

73

Serrated washer D20*d6.2*t2.0*19T

Inner hex screw M6*P1.0*L15

75 Phillip screw M5*P0.8*L10

76 Pedestal mount

77 Axle E

78 Mushroom top Phillip screw Ø8.5 M4*L16

79 Mushroom top inner hex screw M5*L16

80

Spring washer M8

Serrated washer D18*d8.5*t2.0*19T

Mushroom top inner hex screw M8*P1.25*L15

3. LIST OF PARTS (CONTINUED)

10

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual

the words “left” and “right” are used to refer to the product and its parts. As

such, these designations correspond to the “left” and “right” sides of a person

in position to exercise on this product. Also, for brevity, the word “screws” is

used where screws, washers, and other hardware may be involved.

STEP 0 Prepare for Assembly

Please follow instructions (a) through (b) to prepare for assembly.

(a) First, remove all parts and the hardware kit and then remove the product

from the box.

(b) Adjust the leveler in area A downward until it presses the floor and then

begin product assembly.

11

STEP 1 Install the Rear Adjustment Base

Please follow instructions (a) through (d) to install the rear adjustment base.

(a) First, remove the rear footplate (53) and screws (52) from the rear

adjustment base (A6)

(b) Remove the mount (58) and screws (57) from the rear adjustment base

(A6)

Note: The removed parts are bilateral.

(b)

(a)

12

STEP 1 Install the Rear Adjustment Base (Continued)

(c) Remove screws (56) from the main frame (A3).

(b) Secure the rear adjustment base (A6) to the main frame (A3) with screws

(56). Secure screws at area A first. and then secure screws at area B.

(Note: Make sure the serrated side of washer touches the frame.)

(d)

A

B

(c)

B

13

STEP 2 Install the Left and Right Glide Track

Please follow instructions (a) through (j) to install the left and right glide track.

(a) First, remove screws (79) from the right glide track (A4).

(b) There are rubber pads on the foot pedals (A16). Fold the rubber pad up

to access screws. (Note: Please do not pull out the nibes in the middle

at area A.) Secure the foot pedals (A16) onto the foot plate with screws

(79) as shown. Secure screws at area B first and then secure screws at

area C. Finally, press the rubber pads onto foot pedals (A16) firmly by

inserting the nibs on the rubber pads through the holes in the foot pedals

(A16). Make sure that the nibs protrude through the foot pedals (A16).

Note: Follow the same procedure to install the left glide pedal (A17).

(a)

(b)

14

STEP 2 Install the Left and Right Glide Track

(c) First, remove the covers (59) (60) (62) from the main frame (A3).

(d) Remove the axle (63A) and the nut (63) from the main frame (A3). (Note:

The axle may drop off.)

(c)

(d)

15

STEP 2 Install the Left and Right Glide Track (Continued)

Install the right glide track (A4) and the main frame (A3)

(e) First, loosen 3 piece screws from area (d1) covers (Do not reomove

these screws) and then place the right glide track (A4) on the main frame

(A3) and insert the axle (63) into the main frame (A3) and the right glide

track (A4), and loosely secure it with nut. Do not tighten the nut. (Fully

tighten the nut only after STEP 2 is completed.)

d1

(e)

16

STEP 2 Install the Left and Right Glide Track (Continued)

(f) Follow the same procedure to install the left glide track (A5).

L

(f)

17

STEP 2 Install the Left and Right Glide Track (Continued)

Install the right and left glide track (A4) (A5) and the rear adjustment base

(A6).

(g) Remove the axle (77) from the right and left glide track (A4) (A5) and

insert the ball socket.

(h) Secure the ball socket and the glide track with the axle (77) as shown.

(i) Insert the mount (58) back into the place in the rear adjustment base and

secure it with screws (57).

(j) Fully tighten three screws at area (d1) and all the screws of the glide track.

(j)

d1

(i)

(g)

(h)

18

STEP 3 Install the Belts

Do not cross the belts, make sure the belts are parallel as shown. (Note: The

belt are side-specific.)

Please follow instructions (a) through (d) to install the belts.

(a) First, remove the axle (64) from the left glide track (A5).

(b) Insert two belts and bushing from the main frame through the axle. (Follow

the order as shown.) and then secure the nut back into place.

(d) Have another people to hold the left glide track in order to install the right

glide track easlily, but be careful the glide track might glide and cause

injuries when installing.

Note: Follow the same procedure to secure the right side of the belt.

(c)

(a)

(b)

(d)

19

STEP 3 Install the Belts (Continued)

After installing the belts, please inspect the position of the belt on the idler

pulley. The belt should be in the middle of the idler pulley. Make sure that the

belt is not outside of the idler pulley.

If the belt is in the wrong position, lift the pedal to loosen the belt and then

place the belt in the middle of the idler pulley.

20

STEP 4 Install the Display Neck and Pedestal Assembly

Please follow instructions (a) through (l) to install the display neck and

pedestal assembly.

(a) First, remove the fan cover (65) and screws (66) (79) from the display

neck assembly (A1)

(b) Remove the pedestal mount (76), pedestal cover (68) and screws (67)

(69) from the pedestal assembly (A2).

(a)

(b)

La page charge ...

SportsArt S775 Le manuel du propriétaire

SportsArt S775 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents