Ubiquiti MPORT Guide de démarrage rapide

Marque: Ubiquiti

Modèle: MPORT

Taper: Guide de démarrage rapide

mFi Networked Machine

Interface and Monitor

Model: mPort

Introduction

Thank you for purchasing the Ubiquiti Networks® mFi® mPort

™

The mFi mPort is designed for use with the mFi platform.

Once connected, you can use the mFi Controller software to

monitor your devices and define automation rules using your

web browser.

Package Contents

mPort Wall-Mount

Bracket

PoE Adapter and

Power Cord

Terminal

Block (Male)

mFi Networked Machine

Interface and Monitor

Model: mPort

Screws (Qty. 4) Anchors (Qty. 4) Quick Start Guide

System Requirements

• Microsoft Windows Vista, Windows 7, Windows 8, or

MacOSX

• Java Runtime Environment 1.6 (or above)

• Web Browser: Mozilla Firefox, Google Chrome, or Microsoft

Internet Explorer 8 (or above)

Hardware Overview

Front View

Power LED

Ethernet LED

Status LED

Power The Power LED will light steady green when the

mPort is properly connected to a power source.

Ethernet The Ethernet LED will light steady green

when an active Ethernet connection is made and flash

when there is activity.

Status The Status LED will light yellow when the

mPort is first powered on in factory default mode

out of the box. The Status LED will light steady green

when the mPort has been successfully integrated into

a network and is working properly. The Status LED

will flash when the Locate button is used in the mFi

Controller software.

Side View

mFi RJ45 Ports

mFi Terminal

Block Port

USB

Port*

Ethernet Port

Wall-Mount

Bracket

* The USB port is reserved for future use.

Hardware Installation

Remove the Wall-Mount Bracket from the mPort by pressing

the Release Tabs.

Release Tabs

Wall-Mount (Optional)

1. Position the Wall-Mount Bracket with the Release Tabs

ontop.

Release Tab

2. To secure the Wall-Mount Bracket to the wall:

a. Use a pencil to mark the holes on the wall.

b. Use a 6 mm drill bit to drill the holes in the wall.

c. Insert the four Anchors into the wall.

d. Insert the Screws into the anchors.

3. Angle the mPort so that the notches on the bottom of the

Wall-Mount Bracket are inserted into the mPort. Then press

the mPort into the Release Tabs and snap it into place.

Connecting Ethernet

1. Connect an Ethernet cable to the Ethernet port on the

mPort.

2. Connect the other end of the Ethernet cable to the

Ethernet port labeled POE on the PoE Adapter.

3. Connect an Ethernet cable from your LAN to the Ethernet

port labeled LAN on the PoE Adapter.

Note: Wi-Fi settings for the mPort can be configured via

LAN or by connecting an Ethernet cable directly from

your computer to the LAN port on the PoE Adapter. For

details, refer to the Accessing the Configuration Portal

section.

4. Connect the power cord to the power port on the PoE

Adapter. Connect the other end of the power cord to a

power outlet. The Power LED should light up on the mPort.

Software Download and Installation

For local mFi Controller installations, the mFi Controller

software is installed just once when you initially create a

mFi network. It is not necessary to go through the software

installation process every time you add another mFi device.

The mFi Controller software can be downloaded from the

Ubiquiti Networks website.

1. Go to downloads.ubnt.com/mfi

2. Mac users should download mFi.dmg and Windows users

should download mFi-installer.exe.

3. Follow the instructions for your computer type.

Mac Users

1. Click the Install icon.

2. Click Continue and follow the on-screen instructions to

install the software.

3. Go to Go > Applications and double-click the mFi icon.

Proceed to the Configuring the mFi Controller Software section.

PC Users

1. Launch mFi-installer.exe.

2. Click Install.

3. If your computer doesn’t have Java 1.6 or above installed,

you will be prompted to install it. Click Install to continue.

4. Ensure the Start mFi Controller after installation option is

checked and click Finish.

Note: The mFi Controller software can also be launched

from Start > All Programs.

Configuring the mFi Controller Software

1. The mFi Controller software startup will begin. Click

Launch a Browser to Manage the Network.

2. The mFi Configuration Wizard will appear the first time you

launch the mFi Controller software. On the Welcome screen,

select your language and country.Click Next.

3. Select the device(s) that you want to configure. The

Refresh button can be used to refresh the list of devices.

Click Next to continue.

4. Enter an administrator name in the Admin Name field. Enter

a password in the Password and Confirm fields. Click Next.

5. Click Finish to confirm your settings.

6. A login screen will appear for the mFi Controller

management interface. Enter the Admin Name and

Password that you created and click Login.

Accessing the Configuration Portal

You need to connect to the Configuration Portal to configure

any of the following:

• Access to local mFi Controller on a different IP network

• Wireless network access (Wi-Fi settings)

Note: If you are not using these configurations, you do

not need to access the Configuration Portal.

The Configuration Portal can be accessed in two ways:

• Connect an Ethernet cable from your computer to the LAN

port on the PoE Adapter and configure your computer with

a static IP address.

• Connect an Ethernet cable from your DHCP-enabled LAN to

the LAN port on the PoE Adapter.

Configuration Portal via Ethernet to Computer

1. Make sure that your computer is connected via Ethernet to

the LAN port on the PoE Adapter.

WARNING: Do not connect the computer to the port

labeled POE on the PoE Adapter.

2. Configure the Ethernet adapter on your computer with a

static IP address on the 192.168.1.x subnet.

3. Launch your web browser and type http://192.168.1.20 in

the address field. Press enter (PC) or return (Mac).

4. Go to the Configuration Portal Interface Settings section.

Configuration Portal via LAN with DHCP

If it is not already installed, download the Ubiquiti Device

Discovery Tool (v2.3) at www.ubnt.com/download#app

1. Launch the Ubiquiti Device Discovery Tool.

2. A list of Ubiquiti devices on the network will appear. Locate

the appropriate device (named M2M) under Product Name

and double-click it.

Note: If you have more than one of the same device

model, you can determine which one you are selecting

by checking the Hardware (MAC) Address on the

devicelabel.

3. Click WEB UI on the right.

*640-00037-04*

640-00037-04

Configuration Portal Interface Settings

1. The login screen will appear. Enter ubnt in the Username

and Password fields.

2. The Main tab of the Configuration Portal will appear. Click

the Configuration tab.

3. Enter your configuration information on the Configuration

tab:

mFi Controller Enter the mFi Controller settings:

a. Enter the mFi Controller address.

• The IP address and http port used by the

Controller. (The port is usually 6080, for example:

192.168.25.161:6080 or mfi.acme.com:6080)

b. Enter the User Name and Password.

• The admin name and password defined during the

mFi Configuration Wizard.

Wireless Settings To use the mPort on a Wi-Fi network,

configure the Wireless Settings:

a. Click Scan for a list of available SSIDs. Select the

appropriate SSID or type in the name manually in the

SSID field.

b. Select the appropriate Security and Authentication

settings for your network.

c. Enter your network key.

After you’ve entered the necessary settings, click Change. You

will be asked to apply the changes; click Apply.

4. Log in to the mFi Controller.

5. The mPort appears with the mPort

icon in the left

panel under the Drag on to Map heading. Once you’ve

customized your map, you can position the mPort in the

appropriate location.

For details on connecting sensors to the mPort, refer to the

Quick Start Guide included with your sensor.

For additional details on the mFi Controller software, refer to

the User Guide on our website at www.ubnt.com/mfi

Specifications

mPort

Dimensions 100 x 60 x 27.5 mm (H x W x D)

100 x 60 x 36.5 mm (with Bracket)

Weight 4.2 oz (with Bracket)

Power Supply 24V, 0.5A Surge Protection

Integrated PoE Adapter (Included)

Max. Power Consumption 3 W

Networking Interface (1) 10/100 Ethernet Port

Ports (2) mFi RJ45 Ports

(1) mFi Terminal Block Port

Wi-Fi Standards 802.11b/g/n

Memory 16 MB RAM, 8 MB Flash

LEDs 3 LEDs (Power, Ethernet, Status)

Mounting Wall-Mount Bracket (Included)

Operating Temperature -10° to 70° C

Operating Humidity 5 to 80% Condensing

Safety Notices

1. Read, follow, and keep these instructions.

2. Heed all warnings.

3. Only use attachments/accessories specified by the manufacturer.

WARNING: Do not use this product in location that can

be submerged by water.

WARNING: Avoid using this product during an electrical

storm. There may be a remote risk of electric shock from

lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current

requirements indicated on the manufacturer’s label. Connection to a

different power source than those specified may result in improper

operation, damage to the equipment or pose a fire hazard if the

limitations are not followed.

2. There are no operator serviceable parts inside this equipment. Service

should be provided only by a qualified service technician.

3. This equipment is provided with a detachable power cord which has

an integral safety ground wire intended for connection to a grounded

safety outlet.

a. Do not substitute the power cord with one that is not the provided

approved type. Never use an adapter plug to connect to a 2-wire

outlet as this will defeat the continuity of the grounding wire.

b. The equipment requires the use of the ground wire as a part of the

safety certification, modification or misuse can provide a shock

hazard that can result in serious injury or death.

c. Contact a qualified electrician or the manufacturer if there

are questions about the installation prior to connecting the

equipment.

d. Protective earthing is provided by Listed AC adapter. Building

installation shall provide appropriate short-circuit backup

protection.

e. Protective bonding must be installed in accordance with local

national wiring rules and regulations.

Limited Warranty

UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the

product(s) furnished hereunder (the “Product(s)”) shall be free from defects

in material and workmanship for a period of one (1) year from the date

of shipment by UBIQUITI NETWORKS under normal use and operation.

UBIQUITI NETWORKS’ sole and exclusive obligation and liability under

the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion,

to repair or replace any Product that fails to conform to the above

warranty during the above warranty period. The expense of removal and

reinstallation of any Product is not included in this warranty. The warranty

period of any repaired or replaced Product shall not extend beyond its

original term.

Warranty Conditions

The above warranty does not apply if the Product:

(I) has been modified and/or altered, or an addition made thereto,

except by Ubiquiti Networks, or Ubiquiti Networks’ authorized

representatives, or as approved by Ubiquiti Networks in writing;

(II) has been painted, rebranded or physically modified in any way;

(III) has been damaged due to errors or defects in cabling;

(IV) has been subjected to misuse, abuse, negligence, abnormal physical,

electromagnetic or electrical stress, including lightning strikes, or

accident;

(V) has been damaged or impaired as a result of using third party

firmware;

(VI) has no original Ubiquiti MAC label, or is missing any other original

Ubiquiti label(s); or

(VII) has not been received by Ubiquiti within 30 days of issuance of

the RMA.

In addition, the above warranty shall apply only if: the product has been

properly installed and used at all times in accordance, and in all material

respects, with the applicable Product documentation; all Ethernet cabling

runs use CAT5 (or above), and for outdoor installations, shielded Ethernet

cabling is used, and for indoor installations, indoor cabling requirements

are followed.

Returns

No Products will be accepted for replacement or repair without obtaining

a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS

during the warranty period, and the Products being received at UBIQUITI

NETWORKS’ facility freight prepaid in accordance with the RMA process of

UBIQUITI NETWORKS. Products returned without an RMA number will not

be processed and will be returned freight collect or subject to disposal.

Information on the RMA process and obtaining an RMA number can be

found at: www.ubnt.com/support/warranty.

La page est en cours de chargement...

Ubiquiti MPORT Guide de démarrage rapide

Marque: Ubiquiti

Modèle: MPORT

Taper: Guide de démarrage rapide

Télécharger le PDF

rapport

dans d''autres langues

italiano: Ubiquiti MPORT Guida Rapida
English: Ubiquiti MPORT Quick start guide
română: Ubiquiti MPORT Ghid de inițiere rapidă

Ubiquiti MPORT Guide de démarrage rapide

Ubiquiti MPORT Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents