Ubiquiti mPower Guide de démarrage rapide

Marque: Ubiquiti

Modèle: mPower

Taper: Guide de démarrage rapide

mFi Power Strip with

Wi-Fi Connectivity

Model: mPower

Introduction

Thank you for purchasing a Ubiquiti Networks

™

mFi

™

mPower

™

. The mPower is a power strip with Wi-Fi

capability that is designed for use with the Ubiquiti mFi

platform. Once connected, you can use the mFi Controller

software to define rules using your web browser. Rules

detail what actions occur when trigger conditions are met.

This Quick Start Guide is designed to guide you through

the installation and also includes the Warranty terms.

Package Contents

Wall Mount Slide

mFi Power Strip with

Wi-Fi Connectivity

Model: mPower

mPower Mounting

Plate

Screws

(Qty. 2)

Anchors

(Qty. 2)

Quick Start

Guide

System Requirements

• Wi-Fi Network

• Drill with 6 mm Drill Bit (Optional for Wall-Mount)

• Phillips Screwdriver (Optional for Wall-Mount)

Cloud Support

The mFi Controller software can be installed on a local

system or run from the cloud at mfi.ubnt.com. Using the

cloud allows you access from anywhere with an Internet

connection.

mPower

™

Quick Start Guide

Hardware Overview

Top

Status

LED

Front

Circuit Breaker

Reset Button

Device Reset

Button

Hardware Overview

Status LED The Status LED has four primary states:

• Solid yellow When first

powered on in factory

default mode.

• Flashing yellow

Connecting to a Wi-Fi

network.

• Solid blue Successfully

connected to mFi Cloud

or Controller.

• Flashing blue

Connecting to mFi Cloud

or Controller.

Device Reset Button The Device Reset button serves two

functions:

• Restart Restarts the device when you press and release

it quickly.

• Restore Factory Defaults Press and hold until the LED

alternates colors and then remains steady yellow to

restore the device to the factory default settings.

Circuit Breaker Reset Button When excessive current

triggers the circuit breaker, the outlets will shut off. Press

this button to reset the unit.

mPower

™

Quick Start Guide

Hardware Installation

The mPower includes an optional mounting plate.

Wall-Mount

1. Position the Mounting Plate on the wall with the text in

the proper orientation, and mark the mounting holes

on the wall.

Wall Mount Slide

2. Use a 6 mm drill bit to drill the holes.

3. Insert the anchors into the holes and use a Phillips

screwdriver to secure Screws through the Mounting

Plate into the Anchors.

Hardware Installation

4. Align the back of the mPower with the Mounting Plate.

Slide the mPower to the right to lock it into place.

mPower

™

Quick Start Guide

Software Download and Installation

For local mFi Controller installations, the mFi Controller

software is installed just once when you initially create a

mFi network. Devices can be added at any time through

the controller interface but you do not need to go through

the software installation process every time you add

another mFi device.

Note: If using the cloud, there is no need to install

the mFi Controller software on a local system. Skip to

Configuring the mPower via Wi-Fi on page 13.

The mFi Controller software can be downloaded from the

Ubiquiti Networks website.

1. Go to downloads.ubnt.com/mfi

2. Mac users should download mFi.dmg and Windows

users should download mFi-installer.exe.

3. Follow the instructions for your computer type.

Mac Users

1. Open the mFi.dmg file.

2. Click the Install icon.

Software Download and Installation

3. Click Continue and follow the on-screen instructions

to install the software.

4. Go to Go > Applications and double-click the mFi

icon.

Proceed to Configuring the mFi Controller Software on page 10.

mPower

™

Quick Start Guide

PC Users

1. Launch mFi-installer.exe.

2. Click Install.

3. If your computer doesn’t have Java 1.6 or above

installed, you will be prompted to install it. Click Install

to continue.

Software Download and Installation

4. Ensure the Start mFi Controller after installation option

is checked and click Finish.

Note: The mFi Controller software can also be

launched from Start > All Programs.

mPower

™

Quick Start Guide

Configuring the mFi Controller Software

1. The mFi Controller software startup will begin. Click

Launch a Browser to Manage the Network.

2. The mFi Configuration Wizard will appear the first

time you launch the mFi Controller software. On the

Welcome screen, select your language and country.

Click Next.

Software Download and Installation

3. Select the device(s) that you want to configure.

The Refresh button can be used to refresh the list of

devices. Click Next to continue.

4. Enter an administrator name in the Admin Name field.

Enter a password in the Password and Confirm fields.

Click Next.

mPower

™

Quick Start Guide

5. Click Finish to confirm your settings.

6. A login screen will appear for the mFi Controller

management interface. Enter the Admin Name and

Password that you created and click Login.

Configuring the mPower via Wi-Fi

To configure the mPower, you must access it via Wi-Fi

from a computer. The mPower has a default SSID (wireless

network name) labeled mFi followed by the last six

characters of the MAC address.

Windows

1. Go to Connect to Network.

- Windows 8 Click the Network icon.

- Windows 7 Right-click the Network icon.

- Windows Vista Go to Start > Connect To.

- Windows XP Right-click the Wireless Network

icon in the System Tray (lower right corner of the

screen). Click View Available Wireless Networks.

2. Select the wireless network (SSID) that begins with

mFi and then click Connect. Go to Accessing the

Configuration Portal on page 14.

Mac

1. Click the AirPort icon in the menu bar (top right

side of the screen).

2. Select the wireless network (SSID) that begins with

mFi. Once connected, the AirPort icon will change

from gray to solid black.

mPower

™

Quick Start Guide

Accessing the Configuration Portal

1. Launch your web browser. Type https://192.168.2.20

in the address field. Press enter (PC) or return (Mac).

2. You may receive a security certificate warning. Click

Proceed Anyway.

3. The Configuration Portal will appear. Select the wireless

network name (SSID) of your existing wireless network

from the drop-down list. To refresh the list, click the

blue arrows on the right.

Configuring the mPower via Wi-Fi

4. Enter your Wi-Fi security credentials. The options that

appear are based on the encryption method used on

your Wi-Fi network.

5. Select either the Cloud or Local mFi Controller and

enter the account settings:

- Cloud Enter the email and password used to

- Local Enter the following settings:

• Address The IP address and http port used by

the Controller. (The port is usually 6080, for

example: 1.1.1.1:6080 or mfi.acme.com:6080).

• User The user name defined during the mFi

Configuration Wizard.

• Password The password defined during the mFi

Configuration Wizard.

mPower

™

Quick Start Guide

6. Click Apply.

7. A flashing yellow checkmark will appear while

attempting to connect to the Wi-Fi network. It will

appear green once the mPower is connected.

8. A flashing yellow checkmark will appear while

attempting to connect to the Controller. It will appear

green once the mPower is connected.

9. Reconnect your computer to your wireless network by

selecting the SSID from your wireless network utility.

Configuring the mPower via Wi-Fi

10. Access your Controller, and the mPower appears with

the mPower icon in the left panel under the Drag

on to Map heading. You can position the mPower in

the appropriate location.

For additional details on the mFi Controller software, please

refer to the mFi User Guide available on our website at:

documentation.ubnt.com/mfi

mPower

™

Quick Start Guide

Specifications

mPower

Dimensions 241.3 x 116.9 x 41.27 mm

Weight 790 g

Mounting Wall (Kit Included)

Power 110-125VAC, 50-60 Hz,

15 A Per Outlet,

15 A Total

Outlets 3

Memory 16 MB RAM, 8 MB Flash

Wi-Fi Standards 802.11b/g/n

LEDs 1 LED (Status)

Operating Temperature -10 to 45° C

Humidity 95% RH Max.

La page charge ...

Ubiquiti mPower Guide de démarrage rapide

Marque: Ubiquiti

Modèle: mPower

Taper: Guide de démarrage rapide

Télécharger le PDF

rapport

dans d''autres langues

English: Ubiquiti mPower Quick start guide

Ubiquiti mPower Guide de démarrage rapide

Ubiquiti mPower Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents