Ubiquiti mFi mPower mini Guide de démarrage rapide

mFi Power Adapter with

Wi-Fi Connectivity

Model: mPower mini

1

Introduction

Thank you for purchasing the Ubiquiti mFi

™

mPower

™

mini.

The mPower mini is a power adapter with Wi-Fi capability

that is designed for use with the Ubiquiti mFi platform.

Once connected, you can use the mFi Controller software

to monitor the energy usage of the attached device and

define automation rules using your web browser. Rules

detail what actions occur when trigger conditions are met.

This Quick Start Guide is designed to guide you through

the installation and also includes the Warranty terms.

Package Contents

mFi Power Adapter with

Wi-Fi Connectivity

Model: mPower Mini

mPower mini Quick Start Guide

System Requirements

• Wi-Fi Network

Cloud Support

The mFi Controller software can be installed on a local

system or run from the cloud at mfi.ubnt.com. Using the

cloud allows you access from anywhere with an Internet

connection.

2

mPower

™

mini Quick Start Guide

Hardware Overview

Front

Status

LED

Device Reset

Button

Status LED The Status LED has four primary states:

• Solid yellow When first

powered on in factory

default mode.

• Flashing yellow

Connecting to a Wi-Fi

network.

• Solid blue Successfully

connected to mFi Cloud

or Controller.

• Flashing blue

Connecting to mFi Cloud

or Controller.

3

Hardware Installation

Device Reset Button The Device Reset button serves two

functions:

• Restart Restarts the device when you press and release

it quickly.

• Restore Factory Defaults Press and hold until the LED

alternates colors to restore the device to the factory

default settings.

Hardware Installation

The mPower mini plugs into a standard power outlet.

Software Download and Installation

For local mFi Controller installations, the mFi Controller

software is installed just once when you initially create a

mFi network. It is not necessary to go through the software

installation process every time you add another mFi device.

Note: If you are using the cloud, there is no need to

install the mFi Controller software on a local system.

Skip to Configuring the mPower mini via Wi-Fi

on page 11.

4

mPower

™

mini Quick Start Guide

The mFi Controller software can be downloaded from the

Ubiquiti Networks website.

1. Go to downloads.ubnt.com/mfi

2. Mac users should download mFi.dmg and Windows

users should download mFi-installer.exe.

3. Follow the instructions for your computer type.

Mac Users

1. Open the mFi.dmg file.

2. Click the Install icon.

5

Software Download and Installation

3. Click Continue and follow the on-screen instructions

to install the software.

4. Go to Go > Applications and double-click the mFi

icon.

Proceed to Configuring the mFi Controller Software on page 8.

6

mPower

™

mini Quick Start Guide

PC Users

1. Launch mFi-installer.exe.

2. Click Install.

3. If your computer doesn’t have Java 1.6 or above

installed, you will be prompted to install it. Click Install

to continue.

7

Software Download and Installation

4. Ensure the Start mFi Controller after installation option

is checked and click Finish.

Note: The mFi Controller software can also be

launched from Start > All Programs.

8

mPower

™

mini Quick Start Guide

Configuring the mFi Controller Software

1. The mFi Controller software startup will begin. Click

Launch a Browser to Manage the Network.

2. The mFi Configuration Wizard will appear the first

time you launch the mFi Controller software. On the

Welcome screen, select your language and country.

Click Next.

9

Software Download and Installation

3. Select the device(s) that you want to configure.

The Refresh button can be used to refresh the list of

devices. Click Next to continue.

4. Enter an administrator name in the Admin Name field.

Enter a password in the Password and Confirm fields.

Click Next.

10

mPower

™

mini Quick Start Guide

5. Click Finish to confirm your settings.

6. A login screen will appear for the mFi Controller

management interface. Enter the Admin Name and

Password that you created and click Login.

11

Configuring the mPower mini via Wi-Fi

To configure the mPower mini, you must access it via Wi-Fi

from a computer. The mPower mini has a default SSID

(wireless network name) labeled mFi followed by the last

six characters of the MAC address.

Windows

1. Go to Connect to Network.

- Windows 8 Click the Network icon.

- Windows 7 Right-click the Network icon.

- Windows Vista Go to Start > Connect To.

- Windows XP Right-click the Wireless Network

icon in the System Tray (lower right corner of the

screen). Click View Available Wireless Networks.

2. Select the wireless network (SSID) that begins with

mFi and then click Connect. Go to Accessing the

Configuration Portal on page 12.

Mac

1. Click the AirPort icon in the menu bar (top right

side of the screen).

2. Select the wireless network (SSID) that begins with

mFi. Once connected, the AirPort icon will change

from gray to solid black.

12

mPower

™

mini Quick Start Guide

Accessing the Configuration Portal

1. Launch your web browser. Type https://192.168.2.20

in the address field. Press enter (PC) or return (Mac).

2. You may receive a security certificate warning. Click

Proceed Anyway.

3. The Configuration Portal will appear. Select the wireless

network name (SSID) of your existing wireless network

from the drop-down list. To refresh the list, click the

blue arrows on the right.

13

Configuring the mPower mini via Wi-Fi

4. Enter your Wi-Fi security credentials. The options that

appear are based on the encryption method used on

your Wi-Fi network.

5. Select either the Cloud or Local mFi Controller and

enter the account settings:

- Cloud Enter the email and password used to

register at mfi.ubnt.com.

- Local Enter the following settings:

• Address The IP address and http port used by

the Controller. (The port is usually 6080, for

example: 1.1.1.1:6080 or mfi.acme.com:6080).

• User The user name defined during the mFi

Configuration Wizard.

• Password The password defined during the

mFi Configuration Wizard.

14

mPower

™

mini Quick Start Guide

6. Click Apply.

7. A flashing yellow checkmark will appear while

attempting to connect to the Wi-Fi network. It will

appear green once the mPower mini is connected.

8. A flashing yellow checkmark will appear while

attempting to connect to the Controller. It will appear

green once the mPower mini is connected.

9. Reconnect your computer to your wireless network by

selecting the SSID from your wireless network utility.

15

Configuring the mPower mini via Wi-Fi

10. Access your Controller, and the mPower mini appears

with the mPower icon in the left panel under the

Drag on to Map heading. You can position the mPower

mini in the appropriate location.

For additional details on the mFi Controller software, please

refer to the mFi User Guide available on our website at:

documentation.ubnt.com/mfi

16

mPower

™

mini Quick Start Guide

Specifications

mPower mini

Dimensions 110.8 x 71 x 67.7 mm

Weight 150 g

Power 110-125VAC, 50-60 Hz, 15 A

Outlets 1

Memory 16 MB RAM, 8 MB Flash

Wi-Fi Standards 802.11b/g/n

LEDs 1 LED (Status)

Operating Temperature 0 to 45° C

Humidity 10-95%, Noncondensing

17

Safety Notices

1. Read, follow, and keep these instructions.

2. Heed all warnings.

3. Only use attachments/accessories specified by the

manufacturer.

WARNING: Use only in a dry location.

WARNING: Do not plug in to another relocatable

power tap.

WARNING: To reduce the risk of electric shock, use

only indoors.

18

mPower

™

mini Quick Start Guide

Limited Warranty

UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants

that the product(s) furnished hereunder (the “Product(s)”)

shall be free from defects in material and workmanship

for a period of one (1) year from the date of shipment by

UBIQUITI NETWORKS under normal use and operation.

UBIQUITI NETWORKS’ sole and exclusive obligation

and liability under the foregoing warranty shall be for

UBIQUITI NETWORKS, at its discretion, to repair or replace

any Product that fails to conform to the above warranty

during the above warranty period. The expense of removal

and reinstallation of any Product is not included in this

warranty. The warranty period of any repaired or replaced

Product shall not extend beyond its original term.

Warranty Conditions

The above warranty does not apply if the Product:

(I) has been modified and/or altered, or an addition

made thereto, except by Ubiquiti Networks, or Ubiquiti

Networks’ authorized representatives, or as approved

by Ubiquiti Networks in writing;

(II) has been painted, rebranded or physically modified

in any way;

(III) has been damaged due to errors or defects in cabling;

(IV) has been subjected to misuse, abuse, negligence,

abnormal physical, electromagnetic or electrical stress,

including lightning strikes, or accident;

(V) has been damaged or impaired as a result of using

third party firmware; or

(VI) has no original Ubiquiti MAC label, or is missing any

other original Ubiquiti label(s).

La page charge ...

Ubiquiti mFi mPower mini Guide de démarrage rapide

Ce manuel convient également à

Ubiquiti mFi mPower mini Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents