Ubiquiti mPower Pro Guide de démarrage rapide

Catégorie
Antennes réseau
Taper
Guide de démarrage rapide
8-Port mFi Power Strip
with Ethernet and Wi-Fi
Model: mPower PRO
1
2
3
4
5
6
7
8
Introduction
Thank you for purchasing the Ubiquiti Networks® mF
mPower
PRO. The mFi mPower PRO is designed for use
with the mFi platform. Once connected, you can use the
mFi Controller software to monitor your devices and define
automation rules using your web browser. This Quick Start
Guide is designed to guide you through the installation and
also includes the warranty terms.
Package Contents
1
2
3
4
5
6
7
8
Wall Mount Slide
8-Port mFi Power Strip
with Ethernet and Wi-Fi
Model: mPower PRO
1
2
3
4
5
6
7
8
mPower PRO Mounting
Plate
Screws
(Qty. 2)
Anchors
(Qty. 2)
Quick Start
Guide
System Requirements
Microsoft Windows Vista, Windows 7, Windows 8, or
MacOSX
Java Runtime Environment 1.6 (or above)
Web Browser: Mozilla Firefox, Google Chrome, or Microsoft
Internet Explorer 8 (or above)
Hardware Overview
Top
Status
LED
Front
Circuit Breaker
Reset Button
Device Reset
Button
Ethernet Port
Status LED The Status LED primary states are listed below:
Solid yellow When first
powered on in factory
default mode.
Flashing blue
Connecting to mFi
Controller.
Solid blue Successfully
connected to mFi
Controller.
Device Reset Button The Device Reset button serves two
functions:
Restart Restarts the device when you press and release it
quickly.
Restore Factory Defaults Press and hold until the LED
alternates colors and then remains steady yellow to restore
the device to the factory default settings.
Ethernet Port Used to connect to an Ethernet network and
also configuration of Controller and Wi-Fi settings.
Circuit Breaker Reset Button When excessive current
triggers the circuit breaker, the outlets will shut off. Press this
button to reset the circuit breaker.
Hardware Installation
1. Connect the mPower PRO to a power outlet.
8
7
6
5
4
3
2
1
2. Connect an Ethernet cable to the Ethernet port on the
mPower PRO.
8
7
6
5
4
3
2
1
The mPower PRO can be connected to your network using one
of two methods:
Ethernet The mPower PRO is DHCP-enabled. Connect the
Ethernet cable from the mPower PRO to your LAN.
8
7
6
5
4
3
2
1
Wi‑Fi The mPower PRO can connect to a wireless network
once Wi-Fi settings have been configured using the Ethernet
connection. For instructions, refer to the Accessing the
Configuration Portal section.
*640-00099-02*
640-00099-02
Wall-Mount
The mPower PRO includes an optional mounting plate.
1. Position the Mounting Plate on the wall with the text in
the proper orientation, and mark the mounting holes on
the wall.
Wall Mount Slide
2. Use a 6 mm drill bit to drill the holes.
3. Insert the anchors into the holes and use a Phillips
screwdriver to secure Screws through the Mounting Plate
into the Anchors.
4. Align the back of the mPower PRO with the Mounting Plate.
Slide the mPower PRO to the right to lock it into place.
1
2
3
4
5
6
7
8
Software Download and Installation
For local mFi Controller installations, the mFi Controller
software is installed just once when you initially create a
mFi network. It is not necessary to go through the software
installation process every time you add another mFi device.
The mFi Controller software can be downloaded from the
Ubiquiti Networks website.
1. Go to downloads.ubnt.com/mfi
2. Mac users should download mFi.dmg and Windows users
should download mFi‑installer.exe.
3. Follow the instructions for your computer type.
Mac Users
1. Open the mFi.dmg file.
2. Click the Install icon.
3. Click Continue and follow the on-screen instructions to
install the software.
4. Go to Go > Applications and double-click the mFi icon.
Proceed to the Configuring the mFi Controller Software section.
PC Users
1. Launch mFi‑installer.exe.
2. Click Install.
3. If your computer doesn’t have Java 1.6 or above installed,
you will be prompted to install it. Click Install to continue.
4. Ensure the Start mFi Controller after installation option is
checked and click Finish.
Note: The mFi Controller software can also be
launched from Start > All Programs.
Configuring the mFi Controller Software
1. The mFi Controller software startup will begin. Click
Launch a Browser to Manage the Network.
2. The mFi Configuration Wizard will appear the first time you
launch the mFi Controller software. On the Welcome screen,
select your language and country.Click Next.
3. Select the device(s) that you want to configure. The
Refresh button can be used to refresh the list of devices.
Click Next to continue.
4. Enter an administrator name in the Admin Name field. Enter
a password in the Password and Confirm fields. Click Next.
5. Click Finish to confirm your settings.
6. A login screen will appear for the mFi Controller
management interface. Enter the Admin Name and
Password that you created and click Login.
Accessing the Configuration Portal
You need to connect to the Configuration Portal to configure
any of the following:
Access to local mFi Controller on a different IP network.
Wireless network access (Wi-Fi settings)
Note: If you are not using these configurations, you do
not need to access the Configuration Portal.
The Configuration Portal can be accessed in two ways:
Connect an Ethernet cable directly from your computer to
the Ethernet Port on the mPower PRO and configure your
computer with a static IP address.
Connect an Ethernet cable from your DHCP-enabled LAN to
the Ethernet Port on the mPower PRO.
Configuration Portal via Ethernet to Computer
1. Make sure that your computer is connected directly to the
mPower PRO using a standard Ethernet cable.
8
7
6
5
4
3
2
1
2. Configure the Ethernet adapter on your computer with a
static IP address on the 192.168.1.x subnet.
3. Launch your web browser and type http://192.168.1.20 in
the address field. Press enter (PC) or return (Mac).
4. Go to the Configuration Portal Interface Settings section.
Configuration Portal via LAN with DHCP
8
7
6
5
4
3
2
1
If it is not already installed, download the Ubiquiti Device
Discovery Tool (v2.3) at www.ubnt.com/download#app
1. Launch the Ubiquiti Device Discovery Tool.
2. A list of Ubiquiti devices on the network will appear. Locate
the appropriate device (named P8U) under Product Name
and double-click it.
Note: If you have more than one of the same device
model, you can determine which one you are selecting
by checking the Hardware (MAC) Address on the device
label.
3. Click WEB UI on the right.
Configuration Portal Interface Settings
1. The login screen will appear. Enter ubnt in the Username
and Password fields.
2. The Main tab of the Configuration Portal will appear. Click
the Configuration tab.
3. Enter your configuration information on the Configuration
tab:
mFi Controller Select the mFi Controller from the drop-down
and enter the Controller information:
Enter the following settings:
Address The IP address and http port used by the
Controller. (The port is usually 6080, for example:
1.1.1.1:6080 or mfi.acme.com:6080).
User The user name defined during the mFi Configuration
Wizard.
Password The password defined during the mFi
Configuration Wizard.
Wireless Settings To use the mPower PRO on a Wi-Fi network,
configure the Wireless Settings:
a. Click Scan for a list of available SSIDs and select the
appropriate SSID or type in the name manually in the
SSID field.
b. Select the appropriate Security and Authentication
settings for your network.
c. Enter your network key.
After you’ve entered the necessary settings, click Change. You
will be asked to apply the changes; click Apply.
4. Click the Main tab. The Controller and WLAN status
should be displayed confirming your connection. Click the
Refresh button, if necessary.
Note: If the status doesn’t appear to be connected after
several refresh attempts, go back to the Configuration
page and enter your settings again.
5. Log in to the mFi Controller.
6. The mPower PRO appears with the mPower icon in the
left panel under the Drag on to Map heading. Once you’ve
customized your map, you can position the mPower PRO in
the appropriate location.
For additional details on the mFi Controller software, please
refer to the mFi User Guide available on our website at:
documentation.ubnt.com/mfi
Specifications
mPower PRO
Dimensions 250.37 x 116.7 x 42 mm
Weight 754.4 g
Mounting Wall (Kit Included)
Power 110-125VAC, 50-60 Hz,
15 A Per Outlet,
15 A Total
Outlets 8
Networking Interface (1) 10/100 Ethernet Port
Wi-Fi Standards 802.11b/g/n
Memory 16 MB RAM, 8 MB Flash
LEDs 1 LED (Status)
Operating Temperature 0 to 40° C
Humidity 10 to 95% RH Max.
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING: Use only in a dry location.
WARNING: Do not plug in to another relocatable power
tap.
WARNING:
To reduce the risk of electric shock, use only
indoors.
Limited Warranty
UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the
product(s) furnished hereunder (the “Product(s)”) shall be free from defects
in material and workmanship for a period of one (1) year from the date
of shipment by UBIQUITI NETWORKS under normal use and operation.
UBIQUITI NETWORKS’ sole and exclusive obligation and liability under
the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion,
to repair or replace any Product that fails to conform to the above
warranty during the above warranty period. The expense of removal and
reinstallation of any Product is not included in this warranty. The warranty
period of any repaired or replaced Product shall not extend beyond its
original term.
Warranty Conditions
The above warranty does not apply if the Product:
(I) has been modified and/or altered, or an addition made thereto,
except by Ubiquiti Networks, or Ubiquiti Networks’ authorized
representatives, or as approved by Ubiquiti Networks in writing;
(II) has been painted, rebranded or physically modified in any way;
(III) has been damaged due to errors or defects in cabling;
(IV) has been subjected to misuse, abuse, negligence, abnormal physical,
electromagnetic or electrical stress, including lightning strikes, or
accident;
(V) has been damaged or impaired as a result of using third party
firmware;
(VI) has no original Ubiquiti MAC label, or is missing any other original
Ubiquiti label(s); or
(VII) has not been received by Ubiquiti within 30 days of issuance of
the RMA.
In addition, the above warranty shall apply only if: the product has been
properly installed and used at all times in accordance, and in all material
respects, with the applicable Product documentation; all Ethernet cabling
runs use CAT5 (or above), and for outdoor installations, shielded Ethernet
cabling is used, and for indoor installations, indoor cabling requirements
are followed.
Returns
No Products will be accepted for replacement or repair without obtaining
a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS
during the warranty period, and the Products being received at UBIQUITI
NETWORKS’ facility freight prepaid in accordance with the RMA process of
UBIQUITI NETWORKS. Products returned without an RMA number will not
be processed and will be returned freight collect or subject to disposal.
Information on the RMA process and obtaining an RMA number can be
found at: www.ubnt.com/support/warranty.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Ubiquiti mPower Pro Guide de démarrage rapide

Catégorie
Antennes réseau
Taper
Guide de démarrage rapide

dans d''autres langues