Lenco SCD-720 Manuel utilisateur

Catégorie
Lecteur CD
Taper
Manuel utilisateur
User Manual - Portable Boombox with DAB+/ FM radio,
Bluetooth, CD, cassette and USB Player
DRAAGBARE BOOMBOX MET DAB+/FM-RADIO, BLUETOOTH®, CD-,
CASSETTE- EN USB-SPELER
Bedienungsanleitung – Tragbare Boombox mit DAB+- und FM-Radio,
Bluetooth, CD- und USB-Player sowie Kassettenlaufwerk
Mode d’emploi - Boombox portable avec radio DAB+/ FM, Bluetooth,
CD, cassette et lecteur USB
Manual de usuario – Radiocasete portátil con radio DAB+/ FM,
Bluetooth, CD, casete y reproductor USB
Model SCD-720
-2-
V2.0
INDEX
English••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 3
Nederlands•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••20
Deutsch•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••37
Franç ais•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••55
Españ ol•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••72
-3-
ENGLISH
CAUTION:
Usage of controls or adjustments or performance of procedures other than those specied herein may result in
hazardous radiation exposure.
PRECAUTIONS BEFORE USE
K EEP THESE INSTRUCTIONS IN MIND:
1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2) free
space around the whole device.
2. Install in accordance with the supplied user manual.
3. Keep the device aay from heat sources such as radiators, heaters, stoves, candles and other heat-
generating products or naked ame. The device can only be used in moderate climates. Extremely cold or
arm environments should be avoided. Working temperature beteen 0 and 35C.
4. Avoid using the device near strong magnetic elds.
5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device
folloing the instruction manual. During le transmission, please handle ith care and operate in a static-
free environment.
6. Warning Never insert an object into the product through the vents or openings. High voltage os through
the product and inserting an object can cause electric shock and/or short circuit internal parts. For the
same reason, do not spill ater or liquid on the product.
7. Do not use in et or moist areas such as bathrooms, steamy kitchens or near simming pools.
8. The device shall not be exposed to dripping or splashing and make sure that no objects lled ith liquids,
such as vases, are placed on or near the apparatus.
9. Do not use this device hen condensation may occur. When the unit is used in a arm et room ith
damp, ater droplets or condensation may occur inside the unit and the unit may not function properly;
let the unit stand in poer OFF for 1 or 2 hours before turning on the poer: the unit should be dry before
getting any poer.
10. Although this device is manufactured with the utmost care and checked several times before leaving the
factory, it is still possible that problems may occur, as ith all electrical appliances. If you notice smoke, an
excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the
main poer socket immediately.
11. This device must operate on a poer source as specied on the specication label. If you are not sure of
the type of poer supply used in your home, consult your dealer or local poer company.
12. Keep aay from animals. Some animals enjoy biting on poer cords.
13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based uids. To remove severe
stains, you may use a damp cloth ith dilute detergent.
14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modication of the
device or battery replacement.
15. Do not interrupt the connection hen the device is formatting or transferring les. Otherise, data may be
corrupted or lost.
16. If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t
use an USB extension cable because it can cause interference resulting in failing of data.
17. The rating label has been marked on the bottom or back panel of the device.
18. This device is not intended for use by people (including children) ith physical, sensory or mental
disabilities, or a lack of experience and knoledge, unless they’re under supervision or have received
instructions about the correct use of the device by the person ho is responsible for their safety.
19. This product is intended for non professional use only and not for commercial or industrial use.
20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable
position vibrations or shocks or by failure to follo any other arning or precaution contained ithin this
user manual ill not be covered by arranty.
21. Never remove the casing of this device.
22. Never place this device on other electrical equipment.
23. Do not allow children access to plastic bags.
24. Only use attachments/accessories specied by the manufacturer.
-4-
25. Refer all servicing to qualied service personnel. Servicing is required hen the device has been damaged
in any ay, such as the poer supply cord or the plug, hen liquid has been spilled or objects have fallen
into the device, hen the device has been exposed to rain or moisture, does not operate normally, or has
been dropped.
26. Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing
loss.
27. If the product is delivered ith poer cable or AC poer adaptor:
If any trouble occur, disconnect the AC poer cord and refer servicing to qualied personnel.
Don’t step on or pinch the poer adaptor. Be very careful, particularly near the plugs and the cable’s exit
point. Do not place heavy items on the poer adaptor, hich may damage it. Keep the entire device out
of children’s reach When playing ith the poer cable, they can seriously injure themselves.
Unplug this device during lightning storms or when unused for a long period.
The socket outlet must be installed near the equipment and must be easily accessible.
Do not overload ac outlets or extension cords. Overloading can cause re or electric shock.
Devices with class 1 construction should be connected to a main socket outlet with a protective earthed
connection.
Devices ith class 2 construction do not require a earthed connection.
Alays hold the plug hen pulling it out of the main supply socket. Do not pull the poer cord. This can
cause a short circuit.
Do not use a damaged poer cord or plug or a loose outlet. Doing so may result in re or electric shock.
28. If the product contains or is delivered ith a remote control containing coin/cell batteries:
Warning:
Do not ingest battery, Chemical Burn Hazard or equivalent orking.
The remote control supplied ith This product contains a coin/button cell battery. If the battery is sal-
loed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep ne and used batteries aay from children.
If the battery compartment does not close securely, stop using the product and keep it aay from child-
ren.
If you think batteries might have been salloed or placed inside any part of the body, seek immediate
medical attention.
29. Caution about the use of Batteries:
Danger of explosion if battery is incorrectly replaced. Replace only ith the same or equivalent type.
Battery cannot be subjected to high or lo extreme temperatures, lo air pressure at high altitude
during use, storage or transportation.
Replacement of a battery ith an incorrect type that can result in an explosion or the leakage of amma-
ble liquid or gas.
Disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, that can
result in an explosion.
Leaving a battery in an extremely high temperature surrounding environment that can result in an explo-
sion or that leakage of ammable liquid or gas.
A battery subjected to extremely lo air pressure that may result in an explosion or the leakage of am-
mable liquid or gas.
Attention should be dran to the environmental aspects of battery disposal.
INSTALLATION:
Unpack all parts and remove protective material.
Do not connect the unit to the mains before checking the mains voltage and before all other connections
have been made.
-5-
W ARNING FOR CD / DVD PLAYER:
This product contains a lo poer laser device
CLASS 1 LASER PRODUCT
APPAREIL  LASER DE CALSSE 1
PRODUCO LASER DE CLASE 1
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED
AVOID EXPOSURE TO BEAM
W ARNING: DO NOT TOUCH THE LENS.
W ARNING: When participating in the trac listening to a personal music
player can make the listener less aare of potential dangers such as
approaching cars.
W ARNING: To prevent possible hearing damage, do not listen at high
volume levels for long periods.
ACCESSORIES:
Poer cord
Remote control
Instruction manual
Class 1 Laser Product
-6-
OVERVIEW
12 3 4+
SOURCE
MENU
INFO
ENTER
SCAN
VOLUME
1 2 3 4 5 6 7 8 9 10 11 12 13
1. USB input: Input for USB stick
2. SOURCE: Press this key to choose dierent modes: DAB+/FM/CD/USB/BLUETOOTH/CASSETTE TAPE/AUX IN.
3. MENU / INFO: DAB+: Press to display station information.
Press and hold to enter the Menu for setting change. Press or to select menu item.
FM: Press to display station information.
Press and hold to enter the Menu for setting change. Press or to select menu item.
4. PREVIOUS :DAB+: Press to display the previous station information.
FM: Short press to tune to a dierent frequency. Press and hold to scan the previous available station.
CD/USB/BT: Press to search to the previous track.
5. POWER :Press to turn on the unit. Press again to turn o and go to Standby mode.
6. NUMERIC BUTTONS:
12
3
4+
DAB+/FM: Press these buttons ill recall the stored radio station directly. Press and hold to save the radio
station.
CD/USB: Press the REPEAT button to change to dierent repeat playback operaton. Press the PROGRAM
button to setup the program playback operation. Press the FOLDER button to change the folder
(only for MP3).
BT: Press and hold the PAIR button ill disconnect the current connection and start to search another
ne Bluetooth device.
7. DISPLAY: Display the unit operation status and information.
8. CASSETTE CONTROL BUTTONS: (PAUSE / STOP/EJECT / FORWARD / REWIND / PLAY / RECORD)
9. VOLUME: Adjust the main volume.
10. STOP / ENTER: DAB+ / FM: Press to select the change setting in the menu operation.
CD / USB: Press to stop the playback.
11. NEXT :DAB+: Press to display the next station information.
FM: Short press to tune to a dierent frequency. Press and hold to scan the next available station.
CD/USB/BT:Press to search to the next track.
12. PLAY-PAUSE/SCAN
:
DAB+: Press to start auto scanning all the available DAB+ stations.
FM: Short press to toggle beteen stereo and mono audio. Press and hold to start auto scanning all
the available FM stations.
CD/USB/BT Press to toggle beteen pause and resume playback.
13. CD Disc compartment door
14. Cassette tape compartment door
15. Bass port
16. Loudspeaker
17. Carrying handle
-7-
SOURCE
MENU
INFO
ENTER
SCAN
FOLDER PAIR REPEAT PROGRAM
1234+
VOLUME
CASSETTE RECORDER
1416 15 1615
~AC IN
OPEN OPEN
AUX IN
17 18 19 20 2221
18. Battery compartment door
19. AUX IN: Connect to external audio player
20. Headphone out: Connect to the external headphone
21. Antenna: The antenna should be extended to ensure a good DAB+ / FM reception
22. ~AC in: Connect the poer cord to this jack
REPEAT
RANDOM
VOL
DISPLAY
23
24
25
26
27
28
29
30
31
32
43
42
41
40
39
38
37
36
35
34
44
33
23. Standby
24. Numeric buttons
25. Memory
26. Previous / Tune
27. Folder
28. Repeat
29. Folder
30. Info - Scan - Menu
31. BT Previous - BT Next - BT Play/pause
32. ID3 Tag display - CD/USB Stop - CD/USB Play/pause
33. Volume +/-
34. Mute
35. Random
36. CH-
37. Next / Tune
38. Enter
39. Mono/Stereo
40. CH+
41. Sleep
42. X-Bass
43. Equalizer
44. Source
-8-
BATTERY INSERT
~AC IN
AUX IN
C 1,5V C 1,5V C 1,5V
C 1,5V C 1,5V C 1,5V
+
+
OPEN OPEN
+ 1,5V
+ 1,5V
+ 1,5V
1,5V + 1,5V + 1,5V +
BATTERY OPERATION:
For DC operation, rstly remove the AC plug from the AC outlet and
disconnect the AC cord from the ~ AC IN jack. Remove the battery
compartment door at the rear of the unit. Install 6pcs UM-2 (LR14)
C size batteries (NOT supplied) according to the polarity markings
shon inside of the compartment. Install the battery compartment
door.
Note:
- Since the unit dras a little poer from the batteries in standby
mode, remove the batteries if the unit is not going to be used for
a long time.
- Since the unit is at poer saving status hen it is in battery stand
by mode, you can ONLY use the unit’s STANDBY button by press
and hold it more than 5 seconds to turn on the unit. To turn o,
press the STANDBY button again.
REMOTE CONTROL OPERATION:
A CR2025 battery is already installed in the remote control unit.
Before using, pull out the battery insulation sheet as shon on the
left.
To replace a ne battery, please refer to the gure shon on the left.
When inserting a battery, be sure to do so in the proper direction.
-9-
POW ER ON THE SCD-720
~AC IN
OPEN OPEN
AUX IN
SOURCE
MENU
INFO
ENTER
SCAN
FOLDER PAIR REPEAT PROGRAM
1234+
VOLUME
CASSETTE RECORDER
EAR/HEADPHONE USE
On the back site of the SCD-720 you ill nd the headphone connection.
Use a ear set or headphone ith 3, 5mm stereo jack to connect the headphone to the SCD-720.
If you put in the 3,5mm stereo jack the speakers of the SCD-720 ill turned o.
Only the headphone ill ork no.
You can control the volume by the volume knob. All other functions are the same as normal use ithout headset connected.
~AC IN
OPEN OPEN
AUX IN
SOURCE
MENU
INFO
ENTER
SCAN
FOLDER PAIR REPEAT PROGRAM
1234+
VOLUME
CASSETTE RECORDER
Connect the SCD-720 ith the poer cable to the AC outlet.
If you connect the poer cable into the SCD-720, the batte-
ry poer ill be automatically shut don.
Press the STANDBY button to turn on the unit.
To turn o, press the STANDBY button again.
With the SOURCE button you can select input source
You can selected:
DAB+ RADIO
FM RADIO
CD
USB
BLUETOOTH
TAPE (CASSETTE)
AUDIO IN (AUX)
VOLUME CONTROL:
Rotate the VOLUME knob to change the volume.
-10-
Adjusting the Antenna
The antenna at the rear panel of the unit should be fully extended to ensure a good DAB+ / FM reception. Alter the antenna
position for the best reception.
DAB+ OPERATION
The rst time the DAB+ mode is selected, it ill automatically scan for available DAB+ stations. Wait until the scanning has
nished. The display ill sho the scanning progress. After scanning it ill tune to the rst station.
The available stations in a certain reception band ill be shon in the display. In case of eak reception, the station
may falter or give no sound. Try to move the receiver or rotate the antenna so that the eak DAB+ signal comes in
ithout faltering (station names are still shon hen the signal is eak).
Auto Scan
1. Turn on the unit in DAB+ mode.
2. Press and hold the SCAN button (or press the SCAN button on the remote control) to start auto scanning the available
stations.
Manual Scan
By using the manual scan operation, it can help you to adjust the antenna or search station that is missed hile auto scanning.
1. Turn on the unit in DAB+ mode.
2. Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control.
3. Press the or button until Manual is displayed and then press the ENTER button.
4. Press the or button to select the desired channel (e.g. 12C 227.360MHz) (Selection beteen 5A and 13F).
5. Press the ENTER button to conrm.
6. To select another channel (5A~13F), press the or button and then press the ENTER button to conrm.
7. When the station is found, press the ENTER button to select.
8. To quit manual scan, press the MENU button.
Tuning
After scanning all the available DAB stations, press the or button to display and navigate the station list. Then press
the ENTER button to tune to this station within a few seconds.
Storing DAB+ Presets
You can save up to 20 DAB+ stations.
To use the unit buttons to store the preset:
1. Tune to the station you ish to store.
2. To save it to the preset 1 or 2 or 3, press and hold the numeric button respectively. Then it ill save to that preset number.
3. To save it to other preset channel from 4 to 20, press and hold the numeric button 4. Store ill be displayed.
4. Press the or button to select the desired preset number to store.
5. Press the ENTER to store.
To use the remote control button to store the preset:
1. Tune to the station you ish to store.
2. Press and hold the MEMORY button, Store ill be displayed.
3. Press the or button to select the desired preset number to store.
4. Press the ENTER to store.
Recall Stored DAB+ Presets
To use the unit buttons to recall the preset:
1. To recall the preset channel 1 or 2 or 3, press the numeric button respectively. Then it ill tune to that preset channel.
2. To recall other preset channel from 4 to 20, press the numeric button 4. Recall ill be displayed.
3. Press the or button to select the desired preset number to recall.
4. Press the ENTER to recall.
To use the remote control button to recall the preset:
1. Press the MEMORY button, Recall ill be displayed.
2. Press the or button to select the desired preset number to recall.
3. Press the ENTER to recall.
REPEAT
RANDOM
VOL
DISPLAY
REPEAT
RANDOM
VOL
DISPLAY
DAB+ RADIO
-11-
Displaying DAB+ Station Inf ormation
There are several types of information as listed belo. To change the display information, press the INFO button repeatedly.
Radio Text scrolling Signal Bar Program Type (PTY)
Multiplex Name Frequency Signal Error Rate Audio Bit Rate
1. Radio Text scrolling: Shos music titles or program details provided by the broadcaster.
2. Signal Bar: Transmission signal level. The more characters are displayed, the stronger the signal being received.
To improve the reception adjust the antenna position.
3. Program Type (PTY): Type of program provided by the broadcaster.
4. Multiplex Name: Displays name of multiplex to hich the current station belongs.
5. Frequency: Current channel frequency.
6. Signal Error Rate: Shos the error rate. The larger this value, the more errors it receives. To improve the reception, adjust
the antenna position.
7. Audio Bit Rate: This is the current channel audio Bitrate.
OTHER DAB+ MENU OPERATION
Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control. Then press
the or button for dierent options as described belo.
Dynamic Range Control (DRC) (see Note.)
DRC can make quieter sounds easier to hear hen the unit is used in a noisy environment. The DRC level of a broadcast is
set by the broadcaster and transmitted ith the service. Changing the DRC value on your unit enables you to apply a scaling
factor to this level.
There are three levels of compression:
DRC high: Maximum compression as sent ith the transmitted service
DRC lo: Set to 1/2 that of the sent transmitted service
DRC o: No compression
1. Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control.
2. Press the or button until DRC is displayed and then press the ENTER button.
3. Press the or button to select the DRC value and then press the ENTER to conrm.
4. Press the MENU button to exit the menu control.
Note:
- Not all DAB+ broadcasts are able to use DRC function. If the broadcast does not support DRC then the DRC setting in the
unit ill have no eect.
- After you have adjusted the DRC level the sound may be louder.
Prune
This function removes inactive stations.
1. Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control.
2. Press the or button until Prune is displayed and then press the ENTER button.
3. Press the or button to select Yes and then press the ENTER button to prune the unit.
4. Press the MENU button to exit the menu control.
-12-
Adjusting the Antenna
The antenna at the rear panel of the unit should be fully extended to ensure a good DAB+ / FM reception. Alter the antenna
position for the best reception.
FM RADIO OPERATION
Auto Scan
1. Turn on the unit in FM mode.
2. Press and hold the SCAN button to start auto-scanning and saving the available stations (max. 20 storage).
Manual Scan
1. Press the or button repeatedly to tune to a dierent frequency.
2. Alternatively press and hold the or button to automatically search to the next available station.
Storing FM Presets
You can save up to 20 FM stations.
To use the unit buttons to store the preset:
1. Tune to the station you ish to store.
2. To save it to the preset 1 or 2 or 3, press and hold the numeric button respectively. Then it ill save to that preset number.
3. To save it to other preset channel from 4 to 20, press and hold the numeric button 4. Store ill be displayed.
4. Press the or button to select the desired preset number to store.
5. Press the ENTER to store.
To use the remote control button to store the preset:
1. Tune to the station you ish to store.
2. Press and hold the MEMORY button, Store ill be displayed.
3. Press the or button to select the desired preset number to store.
4. Press the ENTER to store.
Recall Stored FM Presets
To use the unit buttons to recall the preset:
1. To recall the preset channel 1 or 2 or 3, press the numeric button respectively. Then it ill tune to that preset channel.
2. To recall other preset channel from 4 to 20, press the numeric button 4. Recall ill be displayed.
3. Press the or button to select the desired preset number to recall.
4. Press the ENTER to recall.
To use the remote control button to recall the preset:
1. Press the MEMORY button, Recall ill be displayed.
2. Press the or button to select the desired preset number to recall.
3. Press the ENTER to recall.
Stereo/Force Mono Selection
When receiving a Stereo FM radio station, press the button on the unit (or MONO/ST. button on the remote control) ill
switch between stereo audio and force mono audio.
Displaying FM Station Inf ormation
There are several types of information as listed belo. To change the display information press the INFO button repeatedly.
Radio Text Program Type (PTY) Frequency Audio Type
1. Radio Text: Scrolling text hich shos information about music titles or program details provided by the radio
station
2. Program Type (PTY): Type of program provided by the broadcaster
3. Frequency: Current channel frequency
4. Audio Type: Stereo or Mono
OTHER FM MENU OPERATION
Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control. Then press
the or button for dierent options as described on next page.
REPEAT
RANDOM
VOL
DISPLAY
REPEAT
RANDOM
VOL
DISPLAY
FM RADIO
-13-
Scan Setting
1. Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control.
2. Press the or button until Scan is displayed and then press the ENTER button.
3. Press the or button to toggle beteen Strong and All and then press the ENTER button conrm. When the
Strong is selected, only the strong stations are detected. Scanning ill ignore the noisy stations. When All is selected,
all stations ill be detected during FM scanning even if the radio station is a bit noisy.
4. The next time doing a FM scan the unit ill search for the stations based on this conrmed setting.
Audio Setting
1. Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control.
2. Press the or button until Audio is displayed and then press the ENTER button.
3. Press the or button to toggle beteen Stereo or Mono selection and then press the ENTER button conrm.
CD/USB OPERATION
Loading and Playing CD Disc
Open the CD door. Install a disc ith the CD label side facing up. Close the CD door. Press the SOURCE button to CD mode.
After reading, the total number of tracks ill be shon on the display and it ill automatically start to play.
Reading and Playing USB Device
Insert a USB device into the USB input jack. Press the SOURCE button to USB mode. After reading the total number of tracks
ill be shon on the display. It ill automatically start to play.
Play/Pause Control
To pause playback press the button. Press the button again to resume playback.
Stop Control
To stop playback press the button.
Skip Track
During playback press the or button to skip to the previous or next track.
High Speed Music Search
During playback press  hold the or button to start high speed searching.
When you release the or button normal speed playback ill resume.
Repeat Play / Random Play
CD Disc mode
During playback press the REPEAT button once, the display shos REP.ONE. The current track ill be played repeatedly.
When pressing the REPEAT button again, the display shos REP.ALL. All tracks ill be played repeatedly.
When pressing the REPEAT button again, the display shos RANDOM. All tracks ill be played in random sequence.
When pressing the REPEAT button again, the unit ill resume to normal playback.
MP3 Disc or MP3 USB mode
During playback press the REPEAT button once, the display shos REP.ONE. The current track ill be played repeatedly.
When pressing the REPEAT button again, the display shos REP.ALBUM. All tracks in the current folder ill be played
repeatedly.
When pressing the REPEAT button again, the display shos REP.ALL. All tracks ill be played repeatedly.
When pressing the REPEAT button again, the display shos RANDOM. All tracks ill be played in random sequence.
When pressing the REPEAT button again, the unit ill resume to normal playback.
Programmed Playback
CD Disc mode
This unit can be programmed to play a sequence of tracks selected.
1. In stop mode press the PROGRAM button, the display shos the program number and the track number.
2. Press the or button to select the desired track.
3. Press the PROGRAM button to save the desired track.
4. Repeat steps 2-3 to store up to 30 programmed tracks.
5. Press the button to start playing the programmed tracks.
6. To clear the program play, press the button twice or change to another mode.
7. During program play you can also do the Repeat One or Repeat All operation, hoever the random play is not
supported.
-14-
MP3 Disc or MP3 USB mode
1. In stop mode press the PROGRAM button, the display shos the program number and the folder number.
2. Press the FOLDER button (or the FOLDER˄ / FOLDER˅ button on the remote control) to select the desired folder.
3. Press the PROGRAM button to save the desired folder.
4. Press the or button to select the desired track.
5. Press the PROGRAM button to save the desired track.
6. Repeat steps 2-3 to program up to 99 programmed tracks.
7. Press the button to start playing the programmed tracks.
8. To clear the program play, press the button twice or change to another mode.
9. During program play you can also do the Repeat One or Repeat All operation, hoever the random play is not
supported.
Note:
- The USB port is only for playback purpose, NOT for external device charging
- Besides playing CDDA audio disc, the unit can also play MP3 le format in CD / USB operation. Hoever, WMA le and
others are not supported.
- If your USB device is loaded ith MP3’s but the display keeps shoing NO on the display, the format of your USB device
might not be compatible with the unit.
- The unit supports USB version 1.1 and 2.0.
- The unit supports USB devices ith capacity up to 32GB.
- The unit may not be compatible ith all USB devices, this is not a problem of the unit.
- For MP3 playback, a maximum of 255 folders ith a maximum of 999 les is supported.
- Due to the USB le read/rite mechanism, the rst le ritten to the usb device ill be played rst and the last le ritten
ill be played last. (The unit ill not sort alphabetically)
Folder Select (MP3 le onl)
During MP3 playback press the FOLDER button (or the FOLDER˄ / FOLDER˅ button on the remote control) to change to the
folder.
In stop mode press the FOLDER button (or the FOLDER˄ / FOLDER˅ button on the remote control) to change to the folder.
Then press the or button to select your desired track to play. Press the button to start track playback.
ID3 Tag Displa (MP3 le onl in hich the ID3 Tag information is included)
Press the DISPLAY button on the remote control ill toggle the ID3 Tag display on/o. When it is on, the MP3 track’s title,
artist and album details ill be displayed.
BLUETOOTH
Please follo the pairing instructions belo to link the unit to your Bluetooth device.
1. Press the SOURCE button repeatedly to enter the Bluetooth mode. The display ill sho BT AUDIO. It ill start
searching and ill display a ashing BT AUDIO.
2. If the unit has never been paired ith a Bluetooth device before or cannot nd the last paired device, the display and the
Bluetooth status indicator ill keep on ashing. Turn on the Bluetooth function of your device and enable the search until
Lenco SCD-720 is found. Select Lenco SCD-720 on the Bluetooth device to make connection. Enter the pass code
0000 if required.
3. After successfully paired the unit ill display the steady BT AUDIO.
4. You can no start playing music from your smartphone irelessly to the speaker.
5. You can press the button to pause or resume the playback.
6. You can press the or button to search to the previous or next song.
Note:
Press and hold the PAIR button ill disconnect the current connection and start to search another ne Bluetooth
device.
This product has a bluetooth reception function, you cannot transmit any bluetooth sound ith it (Bluetooth headset or
earset don’t receive signal of the SCD-720): this means that you can receive irelessly a bluetooth sound signal from
an external source like a smartphone.
-15-
CASSETTE TAPE
Press the SOURCE button repeatedly to enter the Cassette tape mode. The display ill sho TAPE. The cassette control
buttons are location at the top front of the unit.
1. Press the CASSETTE STOP/EJECT button to open the cassette tape door.
2. Insert the cassette tape and close the door rmly.
Play side is facing forard
Insert the cassette tape with the tape side
facing up
3. Press the CASSETTE PLAY button to playback.
4. Press the CASSETTE PAUSE button to pause the playback. To resume the playback, press the CASSETTE PAUSE
button to release it.
5. To stop playback, press the CASSETTE STOP/EJECT button.
6. While it is in stop mode, press the CASSETTE FORWARD or REWIND button to forward or rewind the tape.
7. To open the cassette door during stop, press the CASSETTE STOP/EJECT button once.
8. To open the cassette door during playback, press the CASSETTE STOP/EJECT button twice.
9. To record, press the CASSETTE PLAY and RECORD button together.
NOTE:
- Only type 1 Normal cassette tape can be used for recording.
- If there is tape slack, reind the slack using a pencil to avoid damaging the tape or the unit.
- On the back of the cassette are left and right tabs. This tab can be broken out. If this tab is broken out, it is no longer
possible to record on that side of the cassette. When both tabs are removed, it is no longer possible to record to the
cassette. The RECORD button then locks and cannot be pressed anymore.
-16-
OTHER FUNCTIONS
AUX IN
This allos you to connect the sound from an external player through your unit.
1. Plug a 3.5mm audio cable (not included) into your external player line out and the other end into the AUX IN jack.
2. Press the SOURCE button to enter AUX mode. Display shos AUDIO IN.
3. Start your external player to play music.
4. The unit plays the sound.
EQ OPERATION / X BASS
You can enjoy dierent EQ sound eect modes. Press the EQUALIZER button on the remote control ill change to dierent
sound eects of FLAT / ROCK / CLASSIC / POP / VOCAL / JAZZ.
You can also boost the bass eect of the music. Press the X BASS button on the remote control ill toggle the X Bass eect
beteen ON and OFF.
Note:
- When X-Bass is enabled, the EQ sound eect ill be disabled. Pressing EQUALIZER button ill only sho X-Bass On
ithout any EQ eect. To resume the EQ sound eect, press the X-BASS button to turn o rst.
SLEEP FUNCTION
1. When the unit is sitched on, press the SLEEP button on the remote control repeatedly to select a sleep duration from
either SLEEP OFF, 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes. When the sleep timer is set, the remaining timer ill
periodically be shon on the display.
2. When the sleep timer is zero, the unit ill turn o automatically.
3. To cancel the sleep function, press the STANDBY button to turn o the unit. Or press the SLEEP button repeatedly to
select SLEEP OFF.
LANGUAGE SETUP
You can set the language of the unit.
1. Turn on the unit in DAB+ mode or FM mode.
2. Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control.
3. Press the or button until System is displayed and then press the ENTER button.
4. Press the or button until Language is displayed and then press the ENTER button.
5. Press the or button to toggle beteen dierent languages. Select your desired language and then press the
ENTER button to conrm.
6. Press the MENU button to exit the menu control.
SOFTW ARE VERSION CHECK
You can check the softare version of the unit.
1. Turn on the unit in DAB+ mode or FM mode.
2. Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control.
3. Press the or button until System is displayed and then press the ENTER button.
4. Press the or button until SW ver is displayed and then press the ENTER button to show the software version
number.
5. Press and hold the MENU button (or press the MENU button on the remote control) to exit the menu control
FACTORY RESET
This function resets the unit to the original factory settings.
1. Turn on the unit in DAB+ mode or FM mode.
2. Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control.
3. Press the or button until System is displayed and then press the ENTER button.
4. Press the or button until Reset is displayed and then press the ENTER button.
5. Press the or button until Yes is displayed and then press the ENTER button to reset the unit.
ENERGY SAVING
Due to ErP requirement and protect the environment, the unit ill turn o to the standby mode automatically once no music
has been playing around 15 minutes.
When the unit is poer o due to ErP, you can press the STANDBY button to turn on the unit again.
-17-
FUNCTIONS REMOTE CONTROL
Standby: Press the STANDBY button to turn on the unit.
To turn o, press the STANDBY button again.
Source: Selection of user function: DAB+ RADIO, FM-RA-
DIO, CD, USB, BLUETOOTH, TAPE (CASSET-
TE), AUDIO IN (AUX).
Equalize r: EQ setup: FLAT / ROCK / CLASSIC / POP / VO-
CAL / JAZZ.
X-Bass: Super bass on/o.
Sleep: Sleep time setup: 90-80-70-60-50-40-30-20-10 min.
Mono/Stereo: Mono Stereo selection for FM radio only.
Folder ˄˅: Folder selection for USB and MP3-CD.
Memory: CD: programm CD tracks.
DAB+: programm presets or recall presets.
FM: programm presets or recall presets.
Tune˅ / tune˄: CD/USB/BT: track backard or next.
( / )DAB+: Select scanned stations
FM: Freq. up/don ith 50kHz.
CH+ / CH-: DAB+/FM: Recall presets.
CD/USB/BT: No function.
Repeat : CD: Repeat one or Repeat all.
USB: Repeat one, album or repeat all.
Random: CD/USB: Random function on/o.
DAB/FM FUNCTIONS:
INFO: Sho data information hen receiving dab+ stati-
on.
SCAN: Scanning all dab+ stations.
MENU: Acces to menu functions in combination ith
buttons or and ENTER button.
DAB+/FM f unct ions a nd setup f unct ions.
BLUETOOTH FUNCTIONS:
:backward.
:next.
:play/pause function.
CD/USB FUNCTIONS:
DISPLAY: ID-3 tag on or o.
:Stop function.
:Pause/play function.
VOLUME:
VOL +: Volume up
VOL -: Volume don
REPEAT
RANDOM
VOL
DISPLAY
-18-
o poer
Ensure that the mains cable is securely connected.
Ensure that the unit is sitched on.
The unit does not respond hen pressing an uttons.
Remove the batteries (hen inserted) and remove the poercord for a minute. Then reinsert the batteries.
No sound output
Turn up the volume.
I can’t nd the Bluetooth name of this unit on m Bluetooth device for Bluetooth pairing
Ensure that the unit is sitched on.
Ensure that the Bluetooth function is activated on your Bluetooth device.
The unit has a Bluetooth function that can receive a signal ithin 10 metres.
Disc in place ut the unit on’t pla
Ensure that the disc label is facing up.
Ensure that the disc is clean.
PAUSE mode may be activated, deactivate it.
Disc may be dirty, check and clean the disc. If the disc is damaged, replace another undamaged one.
DAB+/FM reception
Ensure the antenna ire is fully extended.
Electrical interference in your home can cause poor reception. Move the unit aay from them (especially those
ith motors and transformers).
The unit sitches o automaticall during pla
Increase the volume level of your connected sound source (DVD player/TV etc.)
Sound interference coming from ireless devices in Speaers
Move any ireless devices (mobile phone, bluetooth device etc.) aay from the unit.
TROUBLE SHOOTING
-19-
TECHNICAL SPECIFICATIONS
DAB+ radio frequency range: 174.928-239.2 MHz
FM radio frequency range: 87.5-108 MHz
Bluetooth frequency range: 2.402-2.480 GHz
Bluetooth transmission poer: 4 dBm
AC poer input: 230V~ 50Hz 25W
Batteries operation: 6 x 1.5V C (UM-2), not supplied
Speaker output poer: 2 x 6 W
Bluetooth: V5.0
Aux in: 3.5mm stereo jack
Headphone out: 3.5mm stereo jack
Remote control battery: CR2025 x 1pcs
Unit dimension (L x D x H): 390 x 228 x 138 mm
Working Temperature: 0-45C
Total eight: 2.1 kg
The specication presents only as a reference. The value of eight and size are approximation.
Our product is improved ceaselessly and the specication and function may be changed ithout prior notice.
Guarantee
Lenco oers service and arranty in accordance to European la, hich means that in case of repairs (both during and after
the arranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non ocial service center in any ay, the arranty expires.
This device is not suitable for professional use. In case of professional use, all arranty obligations of the manufacturer ill be
voided.
Disclaimer
Updates to Firmare and/or hardare components are made regularly. Therefore some of the instruction, specications and
pictures in this documentation may dier slightly from your particular situation. All items described in this guide for illustration
purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description
made in this manual.
Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as general household aste in
Europe. To ensure the correct aste treatment of the product and battery, please dispose them in accordance to any appli-
cable local las of requirement for disposal of electrical equipment or batteries. In so doing, you ill help to conserve natural
resources and improve standards of environmental protection in treatment and disposal of electrical aste (Waste Electrical
and Electronic Equipment Directive).
CE Marking
Hereby, Commaxx B.V. Wiebachstraat 37, 6466 NG Kerkrade, The Netherlands, declares that this product is in compliance
ith the essential EU directive requirements.
The declaration of conformity may be consulted via [email protected]
Service
For more information and helpdesk support, please visit www.lenco.com
Commaxx B.V. Wiebachstraat 37, 6466 NG Kerkrade, The Netherlands.
TECHNICAL OVERVIEW
-20-
NEDERLANDS
LET OP:
H et gebruik van afstandsbedieningen of aanpassingen of de uitvoering van procedures die niet in dit docu-
ment zijn gespeciceerd, kan leiden tot gevaarlijke blootstelling aan straling.
VOORZORGSMAATREGELEN VOOR GEBRUIK
ONTHOUD DE VOLGENDE INSTRUCTIES:
1. Bedek of blokkeer de ventilatieopeningen niet. Wanneer u het apparaat op een schap plaatst, dient u 5 cm
(2) vrije ruimte rondom het gehele apparaat te behouden.
2. Installeer het product volgens de meegeleverde gebruikershandleiding.
3. Houd het apparaat uit de buurt van hittebronnen, zoals radiatoren, verarmingen, kachels, kaarsen
en andere hittegenererende producten of open vuur. Het apparaat kan alleen orden gebruikt in
een gematigd klimaat. Extreem koude of arme omgevingen dienen te orden vermeden. Het
bedrijfstemperatuurbereik ligt tussen 0 C en 35 C.
4. Gebruik dit apparaat niet in de buurt van krachtige magnetische velden.
5. Elektrostatische ontlading kan normaal gebruik van dit apparaat verstoren. U hoeft het apparaat in dit
geval slechts te resetten en opnieu op te starten volgens de gebruikershandleiding. Wees voorzichtig
tijdens bestandsoverdracht en gebruik het product in een omgeving zonder statische interferentie.
6. Waarschuing Steek nooit een voorerp via de ventilatie- of andere openingen in het product. Er is
hoogspanning in het product aanezig en als u er een object insteekt, kan dat een elektrische schok
veroorzaken en/of kortsluiting in de interne onderdelen. Mors om dezelfde reden geen ater of vloeistof
op het product.
7. Gebruik het toestel niet in vochtige ruimtes, zoals badkamers, stomende keukens of in de buurt van
zembaden.
8. Het apparaat mag niet orden blootgesteld aan druppels en spetters en zorg ervoor dat er geen met
vloeistof gevulde voorerpen, zoals vazen, op of in de buurt van het apparaat orden geplaatst.
9. Gebruik dit apparaat niet anneer condensatie kan optreden. Wanneer het apparaat in een arme, natte
ruimte ordt gebruikt, kunnen zich aterdruppels of condens vormen in het apparaat en kan het apparaat
niet goed functioneren. Laat het apparaat 1 of 2 uur uit staan voordat u het inschakelt: het apparaat dient
droog te zijn voordat deze stroom ontvangt.
10. Alhoeel dit apparaat met grote zorg gefabriceerd en verschillende keren genspecteerd is voordat
het de fabriek verlaat, is het nog steeds mogelijk dat er problemen optreden, zoals met alle elektrische
apparaten. Als u rook, een overmatige hitteontikkeling of enig ander onveracht verschijnsel opmerkt,
moet u onmiddellijk de stekker van het netsnoer uit het stopcontact halen.
11. Dit apparaat moet orden gebruikt met een voedingsbron zoals gespeciceerd op het specicatielabel.
Als u tijfelt over het type voeding dat gebruikt ordt in u huis, raadpleeg dan u dealer of plaatselijk
energiebedrijf.
12. Buiten bereik van dieren houden. Sommige dieren kauen graag op voedingskabels.
13. Gebruik een zacht, droog doekje om het apparaat te reinigen. Gebruik geen oplosmiddelen of op benzine
gebaseerde vloeistoen. U kunt een vochtig doekje met verdund schoonmaakmiddel gebruiken om
hardnekkige vlekken te verijderen.
14. De leverancier is niet verantoordelijk voor schade of verloren gegevens veroorzaakt door storing,
misbruik, modicatie van het apparaat of batterijvervanging.
15. Onderbreek nooit de verbinding anneer het apparaat formatteert of bestanden overdraagt. De gegevens
kunnen anders corrupt of verloren raken.
16. Indien het apparaat een USB-afspeelfunctie heeft, moet de USB-geheugenstick rechtstreeks op het
apparaat orden aangesloten. Gebruik geen USB-verlengkabel, omdat die kan leiden tot storingen met
foutieve gegevens als gevolg.
17. Het classicatielabel bevindt zich op de onderkant of het achterpaneel van het apparaat.
18. Dit hulpmiddel is niet bedoeld voor gebruik door mensen (inclusief kinderen) met een fysieke, zintuiglijke
of mentale handicap, of een gebrek aan ervaring en kennis, tenzij zij toezicht of instructies hebben
gekregen over het juiste gebruik van het hulpmiddel door een persoon die verantoordelijk is voor hun
veiligheid.
19. Dit product is alleen voor niet-professioneel gebruik bedoeld en niet voor commercieel of industrieel
gebruik.
20. Verzeker u ervan dat het apparaat in een stabiele positie staat opgesteld. Schade die ordt veroorzaakt
door het gebruik van dit product in een onstabiele positie, trillingen of schokken of het niet opvolgen van
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88

Lenco SCD-720 Manuel utilisateur

Catégorie
Lecteur CD
Taper
Manuel utilisateur

dans d''autres langues