Lenco PDR-036 Manuel utilisateur

Model PDR-036

User Manual - DAB +, FM radio with rechargeable

battery and bluetooth

Gebruikshandleiding - DAB +, FM-radio met

oplaadbare batterij en Bluetooth

Benutzerhandbuch - DAB +, FM Radio mit

wiederaufladbarer Batterie und Bluetooth

Manuel d’utilisation - DAB +, radio FM avec batterie

rechargeable et fonction bluetooth

Manual de usuario - DAB +, radio FM con batería

recargable y bluetooth

2

Index

English.........................................................................................................................................3

Nederlands................................................................................................................................18

Deutsch.....................................................................................................................................36

Français.....................................................................................................................................56

Español......................................................................................................................................73

Version: 1.0

3

English

PDR-036

CAUTION:

Usage of controls or adjustments or performance of procedures other than those specified

herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not cover or block any ventilation openings. When placing the device on a shelf,

leave 5 cm (2”) free space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and

other heat-generating products or naked flame. The device can only be used in

moderate climates. Extremely cold or warm environments should be avoided. Working

temperature between 0° and 35°C.

4. Avoid using the device near strong magnetic fields.

5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and

restart the device following the instruction manual. During file transmission, please

handle with care and operate in a static-free environment.

6. Warning! Never insert an object into the product through the vents or openings. High

voltage flows through the product and inserting an object can cause electric shock

and/or short circuit internal parts. For the same reason, do not spill water or liquid on

the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near

swimming pools.

8. The device shall not be exposed to dripping or splashing and make sure that no objects

filled with liquids, such as vases, are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm

wet room with damp, water droplets or condensation may occur inside the unit and

the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours

before turning on the power: the unit should be dry before getting any power.

10. Although this device is manufactured with the utmost care and checked several times

before leaving the factory, it is still possible that problems may occur, as with all

electrical appliances. If you notice smoke, an excessive build-up of heat or any other

unexpected phenomena, you should disconnect the plug from the main power socket

immediately.

11. This device must operate on a power source as specified on the specification label. If

you are not sure of the type of power supply used in your home, consult your dealer or

local power company.

12. Keep away from animals. Some animals enjoy biting on power cords.

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To

remove severe stains, you may use a damp cloth with dilute detergent.

14. The supplier is not responsible for damage or lost data caused by malfunction, misuse,

modification of the device or battery replacement.

15. Do not interrupt the connection when the device is formatting or transferring files.

Otherwise, data may be corrupted or lost.

4

16. If the unit has USB playback function, the USB memory stick should be plugged into the

unit directly. Don’t use an USB extension cable because it can cause interference

resulting in failing of data.

17. The rating label has been marked on the bottom or back panel of the device.

18. This device is not intended for use by people (including children) with physical, sensory

or mental disabilities, or a lack of experience and knowledge, unless they’re under

supervision or have received instructions about the correct use of the device by the

person who is responsible for their safety.

19. This product is intended for non professional use only and not for commercial or

industrial use.

20. Make sure the unit is adjusted to a stable position. Damage caused by using this

product in an unstable position vibrations or shocks or by failure to follow any other

warning or precaution contained within this user manual will not be covered by

warranty.

21. Never remove the casing of this device.

22. Never place this device on other electrical equipment.

23. Do not allow children access to plastic bags.

24. Only use attachments/accessories specified by the manufacturer.

25. Refer all servicing to qualified service personnel. Servicing is required when the device

has been damaged in any way, such as the power supply cord or the plug, when liquid

has been spilled or objects have fallen into the device, when the device has been

exposed to rain or moisture, does not operate normally, or has been dropped.

26. Long exposure to loud sounds from personal music players may lead to temporary or

permanent hearing loss.

27. If the product is delivered with power cable or AC power adaptor:

• If any trouble occur, disconnect the AC power cord and refer servicing to

qualified personnel.

• Don’t step on or pinch the power adaptor. Be very careful, particularly near the

plugs and the cable’s exit point. Do not place heavy items on the power adaptor,

which may damage it. Keep the entire device out of children’s reach! When

playing with the power cable, they can seriously injure themselves.

• Unplug this device during lightning storms or when unused for a long period.

• The socket outlet must be installed near the equipment and must be easily

accessible.

• Do not overload ac outlets or extension cords. Overloading can cause fire or

electric shock.

• Devices with class 1 construction should be connected to a main socket outlet

with a protective earthed connection.

• Devices with class 2 construction do not require a earthed connection.

• Always hold the plug when pulling it out of the main supply socket. Do not pull

the power cord. This can cause a short circuit.

• Do not use a damaged power cord or plug or a loose outlet. Doing so may result

in fire or electric shock.

28. If the product contains or is delivered with a remote control containing coin/cell

batteries:

Warning:

• “Do not ingest battery, Chemical Burn Hazard” or equivalent working.

5

• [The remote control supplied with] This product contains a coin/button cell

battery. If the battery is swallowed, it can cause severe internal burns in just 2

hours and can lead to death.

• Keep new and used batteries away from children.

• If the battery compartment does not close securely, stop using the product and

keep it away from children.

• If you think batteries might have been swallowed or placed inside any part of the

body, seek immediate medical attention.

29. Caution about the use of Batteries:

• Danger of explosion if battery is incorrectly replaced. Replace only with the same

or equivalent type.

• Battery cannot be subjected to high or low extreme temperatures, low air

pressure at high altitude during use, storage or transportation.

• Replacement of a battery with an incorrect type that can result in an explosion

or the leakage of flammable liquid or gas.

• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting

of a battery, that can result in an explosion.

• Leaving a battery in an extremely high temperature surrounding environment

that can result in an explosion or that leakage of flammable liquid or gas.

• A battery subjected to extremely low air pressure that may result in an explosion

or the leakage of flammable liquid or gas.

• Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

• Unpack all parts and remove protective material.

• Do not connect the unit to the mains before checking the mains voltage and before all

other connections have been made.

6

WARNING

WARNING: When participating in the traffic listening to a personal music

player can make the listener less aware of potential dangers such as

approaching cars.

WARNING: To prevent possible hearing damage, do not listen at high

volume levels for long periods.

ACCESSORIES

• Instruction manual USB charging cable

FRONT & SIDE PANEL

1. SPEAKER

2. DISPLAY

Display the operation status and information.

3. /TU –

DAB +: After scanning all the available DAB stations, press to display and navigate the

station list.

FM: Press to fine tune to the lower frequency. Press and hold to search the next lower

frequency station.

Bluetooth: Press to skip to the previous track.

7

4. SOURCE

Press this button to choose diﬀerent modes of operation DAB +/FM/Bluetooth/AUX.

5. RADIO STATION NUMBERIC BUTTONS

Press these buttons will recall the stored radio station directly. Press and hold to save the

radio station.

6. BACK/PLAY - PAUSE/UNPAIR

DAB +/FM:

When it is in the menu operation, press this button to exit the current menu page back

to the previous menu page.

FM: Press and hold to start auto-scanning all the available FM stations.

Bluetooth:

Press to pause the playback. Press again to resume the playback.

Press and hold to unpair the current bluetooth connection and start to search another

new Bluetooth device.

7. INFO/MENU

DAB +/FM: Press repeatedly to display different radio station information. Press and hold

to enter the settings menu.

8. STANDBY

Press and hold to turn on the unit. Press and hold again to turn off and go to Standby

mode.

9. /TU +

DAB +: After scanning all the available DAB stations, press to display and navigate the

station list.

FM: Press to fine tune to the higher frequency. Press and hold to search the next higher

frequency station.

Bluetooth: Press to skip to the next track.

10. SELECT/ENTER/SNOOZE/VOLUME CONTROL KNOB

When it is not in the menu operation, rotating this knob will change the volume.

When it is in the menu operation, rotating this knob to select different options to set and

press to confirm.

FM: When it is not in the menu operation, press to toggle between stereo and force

mono when FM station is received.

When the alarm is activated, press this knob repeatedly to enable snooze for 5, 10, 15 or

30min.

11. HEADPHONE

Connect to an external headphone. Headphone connection (3.5mm).

12. AUX IN

Connect to an external audio player.

13. CHARGE IN

Connect your USB power adapter (not included) to charge the unit’s battery or keep it

connected to use it on mains power.

BASIC OPERATION

Press and hold the STANDBY button to turn on the unit. To turn off, press and hold the

STANDBY button again.

8

DAB +/FM/Bluetooth/AUX

When the unit is turned on, press the SOURCE button to toggle between DAB +, FM,

Bluetooth and AUX mode.

Volume Control

Tune the rotary knob to change the volume.

Adjusting the Antenna

The telescopic antenna at the rear panel of the unit should be fully extended to ensure a

good DAB +/FM reception. Alter the antenna position for the best reception.

DAB+ OPERATION

The first time the DAB + mode is selected, it will automatically scan for available DAB +

stations. Wait until the scanning has finished. The display will show the scanning progress.

Full Scan

1. Press and hold the INFO/MENU button to access the menu control.

2. Rotate the ENTER knob (or press the or button) until the “Full Scan” is selected.

3. Then press the ENTER knob to start auto-scanning the available stations.

Manual Scan

1. Press and hold the INFO/MENU button to access the menu control.

2. Rotate the ENTER knob (or press the or button) until the “Manual Tune” is

selected and then press the ENTER knob.

3. Rotate the ENTER knob (or press the or button) to select the desired channel

(5A - 13F).

4. Press the ENTER knob to confirm.

5. To select another channel (example 5A - 13F), press the or button and then

press the ENTER knob to confirm.

6. To quit the menu control, press the BACK button repeatedly.

Tuning

After scanning all the available DAB stations, press the or button to display and

navigate the station list. Then press the ENTER knob to tune to the station within a few

seconds.

Storing DAB + Presets

You can save up to 20 DAB + stations.

1. Tune to the station you wish to store.

Progress bar

Number of

stations found

9

2. To save it to the preset channel 1 or 2 or 3, press and hold the numeric button

respectively. Then it will save to that preset channel.

3. To save it to other preset channel from 4 to 20, press and hold the numeric button

“4+”. Preset channel list will be displayed.

4. Rotate the ENTER knob (or press the or button) to select the desired preset

channel to save.

5. Press the ENTER knob to save.

Recall Stored DAB + Presets

1. To recall the preset channel 1 or 2 or 3, press the numeric button respectively. Then it

will tune to that preset channel.

2. To recall other preset channel from 4 to 20, press the numeric button “4+”. Preset

channel list will be displayed.

3. Rotate the ENTER knob (or press the or button) to select the desired preset

channel to recall.

4. Press the ENTER knob to recall.

Note:

- The telescopic antenna at the rear panel of the unit should be fully extended to ensure

a good reception. Alter the antenna position for the best reception.

Displaying DAB + Station Information

There are several types of information as listed below. To change the display information,

press the INFO/MENU repeatedly.

1. Radio Text scrolling

Shows music titles or program details provided by the selected radio station.

2. Signal Bar

Transmission signal level. The more the rectangles are filled, the stronger the signal is

received. The unfilled rectangle is the threshold level where the signal strength

received should exceed this threshold. To improve the reception, adjust the antenna

position.

3. Program Type (PTY)

Type of program provided by the radio station

4. Multiplex Name

Displays name of multiplex to which the current station belongs

5. Frequency

Current channel number and frequency

6. Signal Error Rate

Shows the error rate. The larger this value, the more errors it receives. To improve the

reception, adjust the antenna position.

7. Audio Bit Rate

This is the current channel audio Bitrate

8. Time

Displays the current time provided by the radio station

9. Date

Displays the current date provided by the radio station

10

OTHER DAB + MENU OPERATIONS

Press and hold the INFO/MENU button to access the menu control. Then rotate the ENTER

knob (or press the or button) for different options as described below.

Prune Invalid

This function removes inactive stations.

1. Press and hold the INFO/MENU button to access the menu control.

2. Rotate the ENTER knob (or press the or button) until the “Prune Invalid” is

selected and then press the ENTER knob.

3. Rotate the ENTER knob (or press the or button) to select “Yes”.

4. Press the ENTER knob to confirm.

5. To quit the menu control, press the BACK button repeatedly.

Dynamic Range Control (DRC)

DRC can make quieter sounds easier to hear when the unit is used in a noisy environment.

The DRC level of a broadcast is set by the selected radio channel and transmitted with the

service. Changing the DRC value on your unit enables you to apply a scaling factor to this

level.

There are three levels of compression:

DRC high :

Maximum compression as sent with the transmitted service

DRC low :

Set to 1/2 that of the sent transmitted service

DRC off :

No compression

1. Press and hold the INFO/MENU button to access the menu control.

2. Rotate the ENTER knob (or press the or button) until the “DRC” is selected and

then press the ENTER knob.

3. Rotate the ENTER knob (or press the or button) to select “High”, “Low” or “Off”.

4. Press the ENTER knob to confirm.

5. To quit the menu control, press the BACK button repeatedly.

Note:

- Not all DAB + radio stations are able to use DRC function. If the station does not support

DRC then the DRC setting will have no effect.

- After you have adjusted the DRC level the sound may be louder.

FM RADIO OPERATION

Auto Scan

1. Turn on the unit in FM mode.

2. Press and hold the button to start auto-scanning and saving the available stations

(max. 20 storage).

Manual Scan

1. Turn on the unit in FM mode.

2. Press the or button repeatedly to manually tune to a different frequency.

3. Or press and hold the or button to automatically search to the next available

channel.

11

Storing FM Presets

You can save up to 20 FM presets.

1. Tune to the station you wish to store.

2. To save it to the preset channel 1 or 2 or 3, press and hold the prefered preset number.

Then it will save to that preset channel.

3. To save it to other preset channel from 4 to 20, press and hold the numeric button

“4+”. A preset channel list will be displayed.

4. Rotate the ENTER knob (or press the or button) to select the desired preset

channel to save.

5. Press the ENTER knob to save.

Recall Stored FM Presets

1. To recall the preset channel 1 or 2 or 3, press the numeric button respectively. Then it

will tune to that preset channel.

2. To recall other preset channel from 4 to 20, press the numeric button “4+”. The preset

channel list will be displayed.

3. Rotate the ENTER knob (or press the or button) to select the desired preset

channel to recall.

4. Press the ENTER knob to recall.

Stereo/Force Mono Selection

When receiving a Stereo FM radio channel, pressing the ENTER knob will switch between

stereo audio and force mono audio.

Note:

- The telescopic antenna at the rear panel of the unit should be fully extended to

ensure a good reception. Alter the antenna position for the best reception.

Displaying FM Station Information

There are several types of information as listed below. To change the display information, press

the INFO/MENU repeatedly.

1. Radio Text

Scrolling text which shows information on music titles or program details provided by

the radio station

2. Program Type (PTY)

Type of program provided by the broadcaster

3. Frequency

Current channel frequency

4. Audio Type

Stereo or Mono

5. Date

Displays the current date provided by the radio station

OTHER FM MENU OPERATIONS

Press and hold the INFO/MENU button to access the menu control. Then rotate the ENTER

knob (or press the or button) for different options as described below.

12

Scan Setting

1. Press and hold the INFO/MENU button to access the menu control.

2. Rotate the ENTER knob (or press the or button) until the “Scan Setting” is

selected and then press the ENTER knob.

3. Rotate the ENTER knob (or press the or button) to select “Strong Stations Only”

or “All Stations” and then press the ENTER knob confirm. When the “Strong Stations

Only” is selected, only the strong stations are detected. Scanning will ignore the noisy

stations. When “All Stations” is selected, all stations will be detected during FM

scanning even if the radio station is noisy.

4. The next time doing the FM scan the unit will search for the stations based on this

confirmed setting.

5. To quit the menu control, press the BACK button repeatedly.

Audio Setting

1. Press and hold the INFO/MENU button to access the menu control.

2. Rotate the ENTER knob (or press the or button) until the “Audio Setting” is

selected and then press the ENTER knob.

3. Rotate the ENTER knob (or press the or button) until to select “Stereo Allowed”

or “Forced Mono” and then press the ENTER knob to confirm.

4. To quit the menu control, press the BACK button repeatedly.

BLUETOOTH AUDIO

Please follow the pairing instructions below to link the unit to your Bluetooth device.

1. Press the SOURCE button to enter the Bluetooth mode. The display will show

“Disconnected”. It will start searching.

2. Turn on the Bluetooth function of your device and enable the search until “Lenco PDR-

036” is found. Select “Lenco PDR-036” on the Bluetooth device to make connection.

Enter the pass code “0000” if required.

3. After successfully paired the display will show “Bluetooth Connected”.

4. You can now start playing music from your smartphone wirelessly to the speaker.

5. You can press the button to pause or resume the playback.

6. You can press the or button to skip to the previous or next song.

Note:

• Press and hold the UNPAIR button will disconnect the connection and start to search

another new Bluetooth device.

• Due to ErP stage 2 requirement and protect the environment, the unit will turn off in

standby mode automatically once no music has been playing for around 20 minutes

in Bluetooth mode. When the unit is power off due to ErP, press and hold the

STANDBY button to turn on the unit again.

“This product has a bluetooth reception function, you can not transmit any bluetooth sound

with it: this means that you can receive wirelessly a bluetooth sound signal from an external

source like a smartphone.”

AUX IN

This allows you to connect an external player’s sound through your unit.

1. You need to plug in a 3.5mm audio cable (not included) first into the unit’s AUX IN

terminal.

13

2. Press the SOURCE button to enter the AUX IN mode.

3. Start your external player to play music.

4. The unit will output the sound.

Note:

• Due to ErP stage 2 requirement and protect the environment, the unit will turn off in

standby mode automatically when it is in AUX mode for more than 4 hours. 10

minutes before entering the standby mode you will be notified with “AUTO POWER

OFF” on the display. To extend the AUX mode you can press the button. When the

unit is power off due to ErP, press and hold the STANDBY button to turn on the unit

again.

SYSTEM SETTINGS

There are several system settings available for user to select their preference. Press and hold

the INFO/MENU button to access the menu control. Rotate the ENTER knob (or press the

or button) until “SYSTEM” is selected and then press the ENTER knob. Then rotate the

ENTER knob (or press the or button) for different selections as shown below. Then

press the ENTER knob to setup. To quit the menu control, press the MENU button repeatedly.

• Theme

• Night Mode

• Sleep

• Alarm

• Equaliser

• Time/Date

• Backlight

• Language

• Factory Reset

• Software Version

Theme

This is to change different display background colours.

Night Mode

It is to set the night mode duration. When the night mode is activated, the display will be

dimmed.

Sleep Function

You can set the sleep timer function among off, 15, 30, 45, 60 and 90 minutes.

1. During the sleep timer count down, there is a moon icon shown on the display bottom

area.

2. When the sleep timer is zero, the unit will be turned off automatically.

3. To cancel the sleep function, press and hold the STANDBY button.

Alarm Setup (Only in Adaptor Charging Mode. Adaptor Not Included.)

There are 2 alarms that can be set independently. Each alarm can be set as Daily, Once,

Weekends and Weekdays. Alarm source can be Buzzer, DAB + or FM. Finally alarm duration

and alarm volume can be set.

14

To enable the alarm, set the alarm to be “On”. To disable the alarm, set it to “Off”.

When the alarm starts, press and hold the STANDBY button to stop the alarm.

Note:

- The alarm function is available only when the unit is in Adaptor charging mode.

- When the unit is operated using built-in battery, the alarm setup cannot be done,

because the time will not be memorized in battery standby mode.

Snooze Function (Only in Adaptor Charging Mode. Adaptor Not Included.)

Snooze function can be operated normally only when it is in adaptor charging mode.

You can activate the "Snooze" function by pressing the ENTER knob when the alarm starts.

The alarm sound will be muted and you can sleep for another short period of time according

to the snooze time set. Press the ENTER knob repeatedly to set the snooze time of 5, 10, 15 or

30 minutes. After the snooze time, the alarm will sound again. To stop the snooze function,

press and hold the STANDBY button.

Equaliser Operation

You can also enjoy different EQ sound presets. These EQ presets are Classic, Jazz, Pop, Rock,

Speech and My EQ.

At My EQ Setup, Treble/Bass can be configured manually.

Time/Date

Under the Time/Date selection, there are several setups as described below.

Set Time/Date

You can manually set the time and the date under this menu.

Auto Update

You can set the Time/Date update condition as listed below.

“from Any” :

Time/Date will be updated by either DAB or FM broadcast

“from Digital Radio” :

Time/Date will be updated by DAB broadcast only

“from FM” :

Time/Date will be updated by FM broadcast only

“No Update” :

Time/Date will never be updated

Set 12/24 Hour

You can set the time display format as 12 or 24 Hour display.

Set Date Format

You can set the date display format as DD-MM-YYYY or MM-DD-YYYY.

Clock Style

You can set the clock style display in Standby mode. They are Normal Digital, Big Digital,

Classic Analog and Modern Analog.

Note:

15

- Clock display in Standby mode is only available when it is in adaptor charging mode.

Adaptor not included.

Note:

- The clock function is operated only when the unit is in adaptor charging mode. Adaptor

not included. When it is operated using the built-in battery, the clock time will not be

memorized in standby mode.

Backlight

If there is no user operation on the unit for a period of time (timeout), the unit’s display

backlight level could automatically be lowered to save power. The timeout can be set to

10sec, 20sec, …, upto 180sec. If the timeout is set to “On”, it means the display is always on

without any auto-dim function. In addition, you can set the display backlight level and dim

level respectively.

Language

You can set the unit in different operation languages.

Factory Reset

This function resets the unit to the original factory settings.

Software Version

It will show the unit software version.

16

Trouble Shooting

No power

• Ensure that the unit is switched on and the battery is fully charged.

No sound output

• Make sure that the unit is not muted.

I can’t find the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing

• Ensure that the unit is switched on.

• Ensure that the Bluetooth function is activated on your Bluetooth device.

• The unit has a Bluetooth function that can receive a signal within 10 meters.

DAB +/FM reception

• Ensure the telescopic antenna at the rear panel should be extended fully to improve

the DAB +/FM reception.

• Electrical interference in your home can cause poor reception. Move the unit to

another location and check the reception again.

Interferences in Speakers

• Check that you have not left a mobile phone near the unit.

TECHNICAL SPECIFICATIONS

DAB + radio frequency range

FM radio frequency range

Bluetooth frequency range

Transmitter output power

Charge in

174.928 - 239.2 MHz

87.5 - 108 MHz

2.402 - 2.480 GHz

Less than 10 mW

DC 5 V 1 A

Built-in battery

2000 mAh

Speaker output power

1 x 2 W RMS

Bluetooth version

V5.0

Aux in

Headphone out

3.5 mm stereo jack

Dimension

153 (L) x 45 (D) x 93 (H) mm

Weight

350 g

• The specification presents only as a reference. The value of weight and size are

approximation.

• Our product is improved ceaselessly and the specification and function may be changed

without prior notice.

17

GUARANTEE

Lenco offers service and warranty in accordance to European law, which means that in case of

repairs (both during and after the warranty period) you should contact your local dealer.

Important note: It is not possible to send products that need repairs to Lenco directly.

Important note: If this unit is opened or accessed by a non-official service center in any way,

the warranty expires.

This device is not suitable for professional use. In case of professional use, all warranty

obligations of the manufacturer will be voided.

DISCLAIMER

Updates to Firmware and/or hardware components are made regularly. Therefore some of the

instruction, specifications and pictures in this documentation may differ slightly from your

particular situation. All items described in this guide for illustration purposes only and may not

apply to particular situation. No legal right or entitlements may be obtained from the

description made in this manual.

DISPOSAL OF THE OLD DEVICE

This symbol indicates that the relevant electrical product or battery

should not be disposed of as general household waste in Europe. To

ensure the correct waste treatment of the product and battery, please

dispose them in accordance to any applicable local laws of requirement

for disposal of electrical equipment or batteries. In so doing, you will

help to conserve natural resources and improve standards of

environmental protection in treatment and disposal of electrical waste

(Waste Electrical and Electronic Equipment Directive).

CE MARKING

Hereby, Commaxx B.V. Wiebachstraat 37, 6466 NG Kerkrade, The Netherlands, declares that

this product is in compliance with the essential EU directive requirements.

The declaration of conformity may be consulted via [email protected]

SERVICE

For more information and helpdesk support, please visit www.lenco.com

Commaxx B.V. Wiebachstraat 37, 6466 NG Kerkrade, The Netherlands

18

Nederlands

PDR-036

LET OP:

Gebruik van bedieningen of afstellingen of uitvoer van procedures anders dan gespecificeerd

in deze documentatie kan leiden tot blootstelling aan schadelijke straling.

VOORZORGSMAATREGELEN VOOR GEBRUIK

ONTHOUD DE VOLGENDE INSTRUCTIES:

1. Bedek of blokkeer de ventilatieopeningen niet. Wanneer u het apparaat op een schap

plaatst, dient u 5 cm (2”) vrije ruimte rondom het gehele apparaat te behouden.

2. Installeer het product volgens de meegeleverde gebruikershandleiding.

3. Houd het apparaat uit de buurt van hittebronnen, zoals radiatoren, verwarmingen,

kachels, kaarsen en andere hittegenererende producten of open vuur. Het apparaat

kan alleen worden gebruikt in een gematigd klimaat. Extreem koude of warme

omgevingen dienen te worden vermeden. Bedrijfstemperatuur tussen 0 °C en 35 °C.

4. Gebruik dit apparaat niet in de buurt van krachtige magnetische velden.

5. Elektrostatische ontlading kan normaal gebruik van dit apparaat verstoren. U hoeft het

apparaat in dit geval slechts te resetten en opnieuw op te starten volgens de

gebruikershandleiding. Wees voorzichtig tijdens bestandsoverdracht en gebruik het

product in een omgeving zonder statische interferentie.

6. Waarschuwing! Steek nooit een voorwerp via de ventilatie- of andere openingen in het

product. Er is hoogspanning in het product aanwezig en als u er een object insteekt,

kan dat een elektrische schok veroorzaken en/of kortsluiting in de interne onderdelen.

Mors om dezelfde reden geen water of vloeistof op het product.

7. Gebruik het toestel niet in vochtige ruimtes, zoals badkamers, stomende keukens of in

de buurt van zwembaden.

8. Het apparaat mag niet worden blootgesteld aan druppels en spetters en zorg ervoor

dat er geen met vloeistof gevulde voorwerpen, zoals vazen, op of in de buurt van het

apparaat worden geplaatst.

9. Gebruik dit apparaat niet wanneer condensatie kan optreden. Wanneer het apparaat

in een warme en vochtige kamer wordt gebruikt, dan kunnen er waterdruppeltjes of

condensatie binnenin het apparaat worden gevormd waardoor het apparaat mogelijk

niet meer goed werkt; houd en apparaat 1 of 2 uur op UIT staan voordat u de voeding

weer inschakelt: het apparaat dient droog te zijn voordat deze stroom ontvangt.

10. Alhoewel dit apparaat met grote zorg gefabriceerd en verschillende keren

geïnspecteerd is voordat het de fabriek verlaat, is het nog steeds mogelijk dat er

problemen optreden, zoals met alle elektrische apparaten. Als u rook, een overmatige

hitteontwikkeling of enig ander onverwacht verschijnsel, moet u onmiddellijk de

stekker van het netsnoer uit het stopcontact halen.

11. Dit apparaat moet werken op een voedingsbron, zoals aangegeven op het

specificatieplaatje. Als u twijfelt over het type voeding dat gebruikt wordt in uw huis,

raadpleeg dan uw dealer of plaatselijk energiebedrijf.

12. Buiten bereik van dieren houden. Sommige dieren bijten graag op voedingskabels.

13. Gebruik een zacht, droog doekje om het apparaat te reinigen. Gebruik geen

oplosmiddelen of op benzine gebaseerde vloeistoffen. U kunt een vochtig doekje met

verdund schoonmaakmiddel gebruiken om hardnekkige vlekken te verwijderen.

19

14. De leverancier is niet verantwoordelijk voor schade of verloren gegevens veroorzaakt

door storing, misbruik, modificatie van het apparaat of batterijvervanging.

15. Onderbreek nooit de verbinding wanneer het apparaat formatteert of bestanden

overdraagt. De gegevens kunnen anders corrupt of verloren raken.

16. Indien het apparaat een USB-afspeelfunctie heeft, moet de USB-geheugenstick

rechtstreeks op het apparaat worden aangesloten. Gebruik geen USB-verlengkabel,

omdat die kan leiden tot storingen met foutieve gegevens als gevolg.

17. Het nominale specificatielabel is te vinden op het paneel aan de onder- of achterkant

van het apparaat.

18. Dit apparaat is niet bestemd voor gebruik door mensen (inclusief kinderen) met

fysieke, zintuiglijke of geestelijke gebreken of gebrek aan kennis en ervaring, tenzij zij

onder toezicht staan of instructies hebben over het juiste gebruik van het apparaat

hebben gekregen van de persoon die verantwoordelijk is voor hun veiligheid.

19. Dit product is alleen voor niet-professioneel gebruik bedoeld en niet voor commercieel

of industrieel gebruik.

20. Verzeker u ervan dat het apparaat in een stabiele positie staat opgesteld.

Beschadigingen veroorzaakt door het gebruik van dit apparaat in een onstabiele

positie, trillingen of schokken of door het niet opvolgen van andere waarschuwingen of

voorzorgsmaatregelen beschreven in deze gebruikshandleiding worden niet gedekt

door de garantie.

21. Verwijder nooit de behuizing van dit apparaat.

22. Plaats dit apparaat nooit op andere elektrische apparatuur.

23. Geef kinderen geen gelegenheid in aanraking met plastic zakken te komen.

24. Gebruik uitsluitend uitbreidingen/accessoires gespecificeerd door de fabrikant.

25. Laat alle reparaties over aan gekwalificeerd onderhoudspersoneel. Onderhoud is

vereist als het toestel hoe dan ook is beschadigd, zoals bijvoorbeeld het netsnoer of de

stekker, wanneer er vloeistof of een voorwerp in het apparaat is terechtgekomen,

wanneer het apparaat is blootgesteld aan regen of vocht, als het niet normaal werkt of

is gevallen.

26. Langdurige blootstelling aan harde geluiden van persoonlijke muziekspelers kan leiden

tot tijdelijk of permanent gehoorverlies.

27. Als het product wordt geleverd met voedingskabel of AC-stroomadapter: Als er

problemen optreden, koppel de wisselstroomvoedingskaart dan los en laat reparaties

over aan bevoegd personeel.

• Nooit op de stroomadapter stappen of deze indrukken. Wees voornamelijk

voorzichtig in de buurt van de stekkers en het punt waar de kabel uit het

apparaat komt. Plaats geen zware voorwerpen op de stroomadapter, om

beschadiging ervan te voorkomen. Houd het gehele apparaat buiten bereik van

kinderen! Wanneer kinderen met de voedingskabel spelen, kunnen zij ernstig

letsel oplopen.

• Haal de stekker uit het stopcontact tijdens onweer of wanneer u deze langere

tijd niet gebruikt.

• Het stopcontact moet in de buurt van de apparatuur zijn geïnstalleerd en

eenvoudig te bereiken zijn.

• Overbelast stopcontacten of verlengsnoeren niet. Overbelasting kan brand of

een elektrische schok veroorzaken.

20

• Apparaten met een Klasse 1 structuur dienen te worden aangesloten op een

stopcontact met een beschermende aardverbinding.

• Apparaten met een Klasse 2 structuur vereisen geen aardverbinding.

• Houd altijd de stekker vast wanneer u deze uit het stopcontact trekt. Trek nooit

aan de voedingskabel. Dit kan tot een kortsluiting leiden.

• Gebruik nooit een beschadigde voedingskabel of stekker of een los stopcontact.

Dit vormt namelijk een risico op brand of elektrische schokken.

28. Indien het product knoopcelbatterijen bevat of wordt geleverd met een

afstandsbediening die knoopcelbatterijen bevat:

Waarschuwing:

• "Batterij niet inslikken, chemisch brandgevaar" of gelijkwaardige werking.

• [De afstandsbediening meegeleverd met] Dit product bevat een munt-

/knoopcelbatterij. Als de batterij wordt ingeslikt, kan deze in slechts 2 uur

ernstige interne brandwonden veroorzaken en tot de dood leiden.

• Houd nieuwe en gebruikte batterijen buiten bereik van kinderen.

• Als de batterijhouder niet goed kan worden gesloten, dient u het product niet

meer te gebruiken en buiten bereik van kinderen te houden.

• Als u denkt dat batterijen zijn ingeslikt of binnenin een willekeurig lichaamsdeel

terecht zijn gekomen, dient u onmiddellijk medische hulp te zoeken.

29. Waarschuwing m.b.t. het gebruik van batterijen:

• Als de batterij onjuist wordt geplaatst, bestaat er explosiegevaar. Vervang de

batterij alleen door een zelfde of vergelijkbare soort batterij.

• Stel de batterij niet bloot aan extreem hoge of lage temperaturen of een lage

luchtdruk op grote hoogte tijdens gebruik, opslag of transport.

• Vervanging van een batterij door een incorrect type kan leiden tot een

ontploffing of de lekkage van ontvlambare vloeistoffen of gas.

• Verwijdering van een batterij in vuur of een hete oven of het mechanisch

verpletteren of snijden van een batterij kan leiden tot een ontploffing.

• Laat een batterij nooit achter in omgevingen met extreem hoge temperaturen,

anders kan dit leiden tot een ontploffing of de lekkage van ontvlambare

vloeistoffen of gas.

• Stel een batterij nooit bloot aan een extreem lage luchtdruk, anders kan dit

leiden tot een ontploffing of de lekkage van ontvlambare vloeistoffen of gas.

• Aandacht voor het milieu is nodig bij het verwijderen van de batterijen.

INSTALLATIE

• Pak alle onderdelen uit en verwijder de beschermende materialen.

• Sluit het apparaat niet aan op het stopcontact, voordat u de netspanning hebt

gecontroleerd en voordat alle andere aansluitingen zijn gemaakt.

La page charge ...

Lenco PDR-036 Manuel utilisateur

Lenco PDR-036 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents