Audioxtra AXIS JS358W Guide d'installation

Marque
Audioxtra
Modèle
AXIS JS358W
Catégorie
Systèmes vidéo de voiture
Taper
Guide d'installation
2
WARRANTY
YEAR
With no wires and no fuss, this
quick & simple plug & play wireless
solution is designed as a universal
hitch system to suit trailers,
horse floats, caravans, forklifts
& other vehicle applications.
JS358W
3.5” WIRELESS REARVIEW SYSTEM
PLUG n PLAY HITCH SYSTEM
• 20m Typical Range
• Magnetic/Adhesive/Screw-on Cam Mounting
• Normal/Mirror/Invert Image
MONITOR
TFT Panel: High Grade (A-Type) Colour LCD
LCD Size: 89mm (3.5-inch) Diagonal
Picture Format: 4:3
Resolution: 480 x 234 Pixels
Contrast: 200:1
Controls: Normal/Mirror/Invert Image
Connection: Cig Power Socket
Input Voltage: DC12V (+/- 20%)
Wireless Frequency: 2.4 GHz
Typical Wireless Range: 20 metres
CAMERA
Lens: 1/4” CMOS
Image Sensor: OC7959
Pixels (PAL): 580 x 540
Viewing Angle: 120°
White Balance: Automatic
Night Vision: 6 IR LED
Ingress Protection: IP67
Power Input: DC9V Battery (not supplied)
Wireless Transmission: 2.4GHz
Mounting:
Magnetic/Adhesive or Screw-on
CAMERA
IP69
WEATHER
PROOF
2.4GHz WIRELESS LCD IR CAMERAPOWER LEAD
Please read all of the installation instructions carefully before installing the product.
Improper installation may void the warranty.
CONTENTS:
Camera and Monitor
(Battery Not Included)
Introduction
Setup
Congratulations on purchasing an AXIS Rear View Backup Camera System. With this
manual, you will be able to properly install and operate the unit. The Backup Camera
System is intended to be installed as a supplement aid to your standard rear view mirror
that already exists in your vehicle. The Backup Camera System should not be used as a
substitute for the standard rear view mirror or for any other mirror that exists in your ve-
hicle. In some jurisdictions, it is unlawful for a person to drive a motor vehicle equipped
with a TV viewer or screen located toward the back of the drivers seat or in any location
that is visible, directly or indirectly, to the driver while operating the vehicle.
STEP 1: Load 9V battery to battery
compartment with its polarities matched.
STEP 2: Place camera above hitch ball
and push power button for 2 seconds on
camera until you see a steady blue light.
(To power off camera hold power button
down for 2 seconds).
Pairing:
1. Turn on camera (see step 2 above)
2. Hold power button on camera for 6 seconds
XQWLO/('ÀDVKHVEOXH
(camera is now in pair mode for 10 seconds)
3. Turn on monitor (see step 3 above).
4. Push the pair button on monitor until
PAIR OK is displayed.
5. Restart monitor (step 3). System is now PAIRED.
STEP 3: Attach monitor to cigarette
lighter port in vehicle.
(To power on/off monitor hold power
button down for 3 seconds).
*Remove screws to add battery
Magnetic Base - If surface not
ÀDWSOHDVHVHFXUHZLWKVFUHZV
cable ties, etc
System Comes Paired
Pairing Button
On/Off Button
Troubleshooting
Safety Information
Camera & Monitor Placement
Plug monitor into lighter socket
Place between ball and hitch Or behind trailer
Static, fuzziness or blue screen on Monitor
• Battery may be weak, try an alternative battery.
(Please note: 3-5 hrs battery life on camera).
• Out of range
• Place the monitor away from direct sunlight, heat, water or moisture.
This product is made with precise electronic components.
Handle with care. Improper use can cause a malfunction.
)LUPO\¿[WKHOLJKWHUSOXJWRFLJDUHWWHVRFNHW
• Do not install the monitor where it may obstruct driver’s view or obstruct
an air bag device.
• Do not attempt to service this product on your own. If the system has any
problem, disconnect the power and contact customer service.
• Dropping the unit may cause possible mechanical failure.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Audioxtra AXIS JS358W Guide d'installation

Marque
Audioxtra
Modèle
AXIS JS358W
Catégorie
Systèmes vidéo de voiture
Taper
Guide d'installation
Télécharger le PDF
rapport

dans d''autres langues

Autres documents