Jenn-Air JGCP636HM Le manuel du propriétaire

Marque: Jenn-Air

Modèle: JGCP636HM

Catégorie: Cuisinières

Taper: Le manuel du propriétaire

JENNAIR

COMMERCIAL-STYLE

GAS COOKTOP

TABLE DE CUISSON À GAZ DE STYLE

COMMERCIAL DE JENNAIR

W11114328A

Use & Care Guide

For questions about features, operation/performance, parts, accessories, or service in the U.S.A., call

1-800-JENNAIR (1-800-536-6247) or visit our website at www.jennair.com.

In Canada, call 1-800-JENNAIR (1-800-536-6247) or visit our website at www.jennair.ca.

Guide d’utilisation et d’entretien

Pour des questions à propos des caractéristiques, du fonctionnement/rendement, des pièces, accessoires ou service aux É.-U.,

composer le 1 800 JENNAIR (1 800 536-6247) ou visiter le www.jennair.com.

Au Canada, composer le 1 800 JENNAIR (1 800 536-6247) ou visiter le www.jennair.ca.

Table of Contents

SAFETY INFORMATION ................................................................3

PARTS AND FEATURES ................................................................5

Cooktop ............................................................................5

Control Knobs ...................................................................6

COOKTOP FEATURES ................................................................... 7

Burners .............................................................................. 7

Grill ....................................................................................8

Chrome Electric Griddle ....................................................9

CARE AND CLEANING ................................................................10

Cooktop Surface .............................................................10

Sealed Surface Burners ..................................................10

Porcelain-Coated Grates and Caps ...............................11

Grill ..................................................................................11

Griddle .............................................................................12

Cooktop Controls ............................................................13

Stainless Steel .................................................................13

TROUBLESHOOTING ..................................................................14

ASSISTANCE OR SERVICE .........................................................15

ACCESSORIES .............................................................................15

Table de matières

INFORMATIONS DE SÉCURITÉ..................................................16

PIÈCES ET CARACTÉRISTIQUES ..............................................18

Table de cuisson .............................................................18

Boutons de commande ..................................................19

CARACTÉRISTIQUES DE LA TABLE DE CUISSON ..................20

Brûleurs ...........................................................................20

Gril ...................................................................................21

Plaque à frire chromée ....................................................22

ENTRETIEN ET NETTOYAGE ......................................................23

Surface de la table decuisson .......................................23

Brûleurs de surface scellés .............................................23

Grilles et chapeaux émaillés ...........................................24

Gril ...................................................................................24

Plaque à frire ...................................................................25

Commandes de la table decuisson ...............................26

Acier inoxydable ..............................................................26

DÉPANNAGE .................................................................................27

ASSISTANCE OU SERVICE .........................................................28

ACCESSOIRES .............................................................................28

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

WARNING: If the information in these instructions is not followed exactly, a fire or

explosion may result causing property damage, personal injury or death.

– Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this

or any other appliance.

– WHAT TO DO IF YOU SMELL GAS:

•

Do not try to light any appliance.

•

Do not touch any electrical switch.

•

Do not use any phone in your building.

•

Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

•

If you cannot reach your gas supplier, call the fire department.

–

Installation and service must be performed by a qualified installer, service agency or

the gas supplier.

WARNING: Gas leaks cannot always be detected by smell.

Gas suppliers recommend that you use a gas detector approved by UL or CSA.

For more information, contact your gas supplier.

If a gas leak is detected, follow the “What to do if you smell gas” instructions.

SAFETY INFORMATION

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock,

injury to persons, or damage when using the cooktop, follow

basic precautions, including the following:

■ WARNING:

NEVER use this appliance as a space

heater to heat or warm the room. Doing so may result in

carbon monoxide poisoning and overheating of the cooktop.

■ CAUTION: Do not store items of interest to children in

cabinets above the cooktop – children climbing on the

cooktop to reach items could be seriously injured.

■ Proper Installation – The cooktop, when installed, must be

electrically grounded in accordance with local codes or, in

the absence of local codes, with the

National Electrical

Code, ANSI/NFPA70 or the Canadian Electrical Code,

Part 1

. Be sure the cooktop is properly installed and

grounded by a qualified technician.

■

This cooktop is equipped with a three-prong grounding

plug for your protection against shock hazard and should

be plugged directly into a properly grounded receptacle. Do

not cut or remove the grounding prong from this plug.

■

Disconnect the electrical supply before servicing the

cooktop.

■ Injuries may result from the misuse of the cooktop such as

stepping, leaning, or sitting on the top surface.

■ Maintenance – Keep cooktop area clear and free from

combustible materials, gasoline, and other flammable

vapors and liquids.

■ Storage on the cooktop – Flammable materials should not

be stored on or near surface units.

■ Top burner flame size should be adjusted so it does not

extend beyond the edge of the cooking utensil.

These instructions cover several different models. The cooktop you have purchased may have some or all of the items listed. The

locations and appearances of the features shown here may not match those of your model. Refer to these instructions or the

“Frequently Asked Questions (FAQs)” section of our website at producthelp.jennair.com for more detailed instructions. In Canada,

refer to the Customer Service Section at www.jennair.ca.

COOKTOP

Grill (on some models)

Cooktop grate

Electric griddle (on some models)

Island trim

Drip tray (on griddle models)

Console panel

48" (121.9 cm) cooktop shown*

*Cooktop conguration may differ.

PARTS AND FEATURES

CONTROL KNOBS

The cooktop features are accessed through the cooktop knobs.

Cooktop Knobs and Indicator Lights

Left Rear Knob

Left Front Knob

Grill Knob

Center Right Rear Knob

Center Right Front Knob

Griddle Knob

Griddle Preheat Light

Griddle Cooktop ON Light

48" (121.9 CM)

NOTE: Cooktop conguration, features, and controls may differ.

FEATURE DESCRIPTION/BEHAVIOR INSTRUCTIONS

Griddle Cooktop ON

Light

Left Griddle indicator light - The Griddle Cooktop

ON light illuminates when the griddle knob is

powered on.

Griddle Preheat Light Right Griddle indicator light - The Griddle Preheat

light ashes while the griddle is preheating. Once

preheat temperature has been reached, the

indicator lights solid.

PARTS AND FEATURES

WARNING

Fire Hazard

Do not let the burner flame extend beyond the edge of

the pan.

Turn off all controls when not cooking.

Failure to follow these instructions can result in death

or fire.

Turn knob counterclockwise further for Simmer Hi and Simmer Lo.

BTU/hr

BURNER

APPEARANCE

FEATURES

Large

stacked

burner

This burner has an upper

and lower level of ame.

The Hi setting uses both

ame levels at full power to

provide the highest heat.

It is ideal for cooking large

quantities of food or liquid

and using large pots and

pans. The Simmer Hi and

Lo settings use the lower

ame only.

Small

burner

This burner is ideal for

cooking smaller quantities

of food and melting

chocolate or butter.

Igniting Burners:

■ Electric igniters automatically light the surface burners

when burner knobs are turned to IGNITE.

■ Before setting a burner knob, place lled cookware on the

grate. Do not operate a burner using empty cookware or

without any cookware on the grate.

■ Visually check that the burner has lit. If the burner does not

ignite, listen for the clicking sound. If you do not hear the

igniter click, turn off the burner. Check for a tripped circuit

breaker or blown fuse.

■ Check that the burner knob is pressed completely down

on the valve shaft. If the spark igniter still does not operate,

call a trained repair specialist.

■ When the burner knob for the desired burner is turned to the

IGNITE position, the burner will click independent of the other

burners.

Flame-Sensing™ Reignition Feature

During cooktop use, if one or more burners are extinguished

due to external causes (such as a water spill, wind, or

ventilation draft), the ignition system will turn on to reignite

the flame. When the flame comes back on, the system will

stop sparking. If the draft in the room is not removed, occasional

sparking may continue. Sparking may also occasionally occur

when using the low setting on a burner.

REMEMBER: When cooktop is in use or during the Self-

Cleaning cycle, the entire cooktop area may become hot.

In Case of Power Failure

Hold a lit match near a

burner and turn knob

counterclockwise to Hi.

After burner lights, turn

knob to desired setting.

To Set a Burner:

Push in and turn

counterclockwise

2. Turn knob

counterclockwise

to IGNITE.

between Hi and Lo.

BURNERS

COOKTOP FEATURES

SEALED SURFACE BURNERS

Sealed surface burners are designed to minimize gaps and

seams that can allow liquids and spills to get under the

cooktop. This design makes cleanup quick and easy.

Burner

Burner cap

Burner base

IMPORTANT: Do not obstruct the ow of combustion and

ventilation air around the burner grate edges.

Burner cap: Always keep the burner cap in place when

using a surface burner. A clean burner cap will help avoid poor

ignition and uneven ames. Always clean the burner cap after a

spillover, and routinely remove and clean the caps according to

the “Care and Cleaning” section.

Gas opening: Gas must ow freely throughout the gas

opening for the burner to light properly. Keep this area free of

soil and do not allow spills, food, cleaning agents, or any other

material to enter the gas opening. Keep spillovers out of the gas

opening by always using a burner cap.

Burner Ports:

Check burner ames occasionally for proper size and shape as

shown above. A good ame is blue in color, not yellow. Keep

this area free of soil and do not allow spills, food, cleaning

agents, or any other material to enter the burner ports.

Upper

(main)

ﬂame

Lower

(simmer)

ﬂame

Large Burner

GRILL (on some models)

The grill module consists of a cast-iron grate, a burner assembly,

deector and a drip tray.

NOTE: The burner assembly is not removable and should not be

removed except by a qualied service technician.

Grate

Deﬂector

Burner assembly

Drip tray

When using the grill, follow the guidelines below:

■ Trim excess fat to reduce spattering. Slit the remaining fat on

the edges to avoid curling.

■ Allow space between food on the grill. Crowding food will

result in uneven cooking.

■ For most even results, center foods on the grate directly over

the heat source.

■ Use a metal spatula or tongs to turn food.

■ For even cooking, foods such as chicken quarters should be

turned several times.

■ To check for doneness of meats and poultry, use an instant

read thermometer or make a small cut in the center of the

food.

■ Do not leave the grill unattended while cooking.

■ To avoid damage to the grill, do not use aluminum foil,

charcoal or wood chips.

■ To avoid damage to cookware, do not place cookware on the

grill when in use. Food should be cooked directly on the grill

grate.

COOKTOP FEATURES

CHROME ELECTRIC GRIDDLE

(on some models)

The chrome electric griddle provides the perfect cooking

surface for grilled sandwiches, pancakes, eggs, burgers,

sautéed vegetables, and many more family favorites. The

attractive low-stick surface is designed to make cleanup easy.

The chrome electric griddle system provides a convenient

cooking surface.

■ Be sure plastic lm has been removed and wash with hot

water before rst use.

■ To avoid scratching the griddle, do not place any pots or

pans on the griddle. Use only heat-resistant plastic or

wooden utensils.

■ The griddle surface is ready to use and does not need to be

seasoned.

■ Pouring cold water on a hot griddle may warp the griddle,

resulting in an uneven cooking surface.

Griddle

Drip tray

The left griddle indicator

light shows that there

is power applied to the

griddle.

The right griddle indicator

light blinks to show that

the griddle is preheating.

When preheat is complete,

the right griddle indicator

lights solid.

To Use:

1. Position drip tray.

2. Push in and turn

knob

to desired temperature.

4. Place food on the

griddle

and cook to desired doneness.

To Use:

1. Turn on

overhead hood.

2. Push in and turn

knob

to IGNITE. The ame will

ignite in 1-4 seconds.

3. Turn knob to ON

and allow grill to preheat.

4. Place food on

grill.

Griddle Cooktop ON Light

Griddle Preheat Light

Cooking Chart

The settings and times are guidelines only and may need to be

adjusted for individual tastes.

FOOD ITEM TEMPERATURE

COOK TIME

(IN MINUTES)

Toast/Pancakes 350ºF (175ºC) 4-10

Eggs 250ºF (120ºC) 7-10

Meats 350ºF (175ºC) 10-20

Potatoes 350-450ºF (175-230ºC) 10-20

Fish 250-350ºF (120-175ºC) 8-15

3. Wait for preheat

light to solid

indicating the griddle

has reached preheat.

COOKTOP FEATURES

1. Wipe off cooktop, grates, and caps.

2. Clean food spills.

To preserve the nish, clean food spills containing acids,

such as vinegar and tomato, as soon as the entire appliance

is cool.

SEALED SURFACE BURNERS

1. Remove burner cap.

2. Clean gas opening with damp cloth.

4. Replace burner cap.

Burner

Incorrect

Correct

5. Turn on burner.

If the burner does not light, check cap alignment. If the

burner still does not light, do not service the sealed burner

yourself. Contact a trained repair specialist.

3. Clean clogged burner ports.

Use a straight pin. Do not enlarge or distort the port. Do not

use a wooden toothpick. If the burner needs to be adjusted,

contact a trained repair specialist.

COOKTOP SURFACE

IMPORTANT:

■ Before cleaning, make sure all cooktop knobs are OFF

and cooktop is cool. Always follow label instructions on

cleaning products.

■ Soap, water, and a soft cloth or sponge are suggested rst

unless otherwise noted.

After Each Use:

CARE AND CLEANING

PORCELAIN-COATED GRATES

AND CAPS

Use scrub and cleanser.

Know Your Grates and Caps

■ Food spills containing acids, such as vinegar and tomato,

should be cleaned as soon as the cooktop, grates, and

caps are cool. These spills may affect the nish.

■ To avoid chipping, do not bang grates and caps against

each other or hard surfaces such as cast iron cookware.

■ Do not reassemble caps on burners while wet.

■ Do not clean in the Self-Cleaning cycle.

■ Do not clean in dishwasher.

Clean with a nonabrasive nylon scrub pad and mildly abrasive

cleanser.

GRILL

To Remove for Cleaning:

Before removing or replacing grill components, make sure

the control knobs are turned to OFF. Allow the grill to cool

completely before handling.

1. Remove grill grate and deector.

Grill grate

Deector

2. Remove and clean drip tray.

Drip tray

To Clean:

Do not use oven cleaners, metal brushes, abrasive scouring

pads or other scrubbers made to clean grill components.

Grate:

■ Do not clean grill grate in dishwasher.

■ Do not clean in a self-cleaning oven.

Deector:

Drip Tray:

■ Allow cooktop to cool before cleaning.

Module Basin:

1. Scrub with

brush while

grate is still

warm.

Use a soft-bristle brush.

Oven mitts may be

worn while cleaning.

2. Soak in warm,

soapy water for

30 minutes.

After soaking, scrub

with nonabrasive pad.

Soak in warm, soapy water to loosen soil.

After soaking, scrub with non-abrasive pad.

Wipe with warm, soapy water or

non-abrasive cleanser.

Use damp cloth or non-abrasive pad.

1. Wipe with warm,

soapy water or

non-abrasive

cleanser.

Use damp cloth or

non-abrasive pad.

2. For heavy soil,

soak with paper

towels.

Soak paper towels in

household cleanser and

lay them on the soil for

at least 30 minutes.

After soaking, scrub

with a nonabrasive pad.

CARE AND CLEANING

To Replace:

Slide drip tray into opening on the left front side of the grill

basin.

1. Replace drip tray.

2. Place deector on top of burner

assembly.

3. Place grill grate into position.

Drip tray

1. Turn knob to 300°F (149°C) to preheat.

2. Pour water on soiled area.

Using a measuring cup, pour up to 1 cup (236.6 mL) tap

water over the soiled area. Start at the back, allowing the

water to run toward the drip tray in the front. Allow the water

to bubble on the griddle for 3–4 seconds.

Wait until preheat is complete before cleaning.

GRIDDLE

Tips:

■ Prior to cleaning the griddle, make sure that all cooktop

burners have been turned off.

■ For best results, clean the griddle shortly after removing the

food.

Do Not Use:

■ Soap

■ Abrasive materials

■ Cleaning materials, including stainless steel cleaner

After Each Use:

3. Scrape residue into drip tray.

Use a pad holder or wooden spoon with a non-abrasive pad

or cloth. Use pressure on soiled areas. Repeat if needed for

heavy soils.

CARE AND CLEANING

6. Wipe off griddle.

7. Remove, empty, and clean drip tray.

Clean the drip tray with warm, soapy water. Wipe the area

under the drip tray clean. Once dry, put the drip tray back in

position.

Once cool, wipe the griddle with a clean, damp terry

cloth towel. Then buff with a microber cloth. If streaking,

rainbowing, or ghosting occurs, use a mixture of 1 part white

vinegar to 2 parts water on a towel to wipe the griddle.

Fold a damp towel and, with the pad holder or wooden spoon,

go over the griddle to remove remaining residue.

4. Remove remaining residue.

5. Turn off griddle and let cool.

COOKTOP CONTROLS

1. Remove knobs.

2. Clean with warm, soapy water.

Know Your Cooktop Controls

■ To avoid damage to the cooktop controls, do not use steel

wool, abrasive cleansers, or an oven cleaner.

■ To avoid damage, do not soak knobs.

■ When replacing knobs, make sure knobs are in the Off

position.

■ When replacing knobs after cleaning either the surface

burner controls or the griddle module control, make sure the

knobs are replaced to the correct location. See the “Knob

Variations” section for reference.

Pull the knobs straight away from the control panel to remove.

STAINLESS STEEL

Use cleaner or wipes.

Do Not Use:

■ Soap-lled scouring pads

■ Abrasive cleaners

■ Cooktop polishing creme

■ Steel-wool pads

■ Gritty washcloths

■ Abrasive paper towels

Use affresh

Stainless Steel Cleaner or affresh

Stainless Steel

Cleaning Wipes (not included). Rub in direction of grain to

avoid possible damage to the steel surface.

CARE AND CLEANING

IF YOU EXPERIENCE POSSIBLE CAUSES SOLUTION

Nothing will operate. A household fuse has blown

or a circuit breaker has tripped.

Replace the fuse or reset the circuit breaker. If the problem

continues, call an electrician.

Surface burners will not

operate.

This is the rst time the surface

burners have been used.

Turn on any one of the surface burner knobs to release air from

the gas lines.

The control knob is not set

correctly.

Push in knob before turning to a setting.

The burner ports are clogged. Clean clogged burner ports with a straight pin.

Surface burner ames

are uneven, yellow, and/

or noisy.

The burner ports are clogged. Clean clogged burner ports with a straight pin.

The burner caps are not

positioned properly.

Make sure cap is properly aligned with the burner.

Propane gas is being used. The cooktop may have been converted improperly. Contact

a trained repair specialist.

Surface burner makes

popping noises.

The burner is wet. Let it dry.

Burner sparks but does

not light.

There is continuous sparking, but

the burner does not light.

Make sure cap is properly aligned with burner.

If sparking continues, discontinue use of the surface burner and

contact a service technician.

Excessive heat around

cookware on cooktop.

The cookware is not the proper

size.

Use cookware about the same size as the surface cooking

area or surface burner. Cookware should not extend more

than 1/2" (1.3 cm) outside the cooking area.

Cooktop cooking results

not what expected.

The proper cookware is not being

used.

Use medium-to-heavy cookware made of the material that

cooks food the way you want. The best cookware should have

a at bottom, straight sides, and a well-tting lid.

The control knob is not set to the

proper heat level.

Set the Cooktop Control to HI, MED, or LO, depending upon

the type of cooking you want to do.

The cooktop is not level. The cooktop must be level for the griddle to operate properly.

See the Installation Instructions for leveling instructions.

First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a

service call, refer to the “Warranty,” or visit https://jennair.custhelp.com. In Canada, visit http://www.jennair.ca.

TROUBLESHOOTING

Before calling for assistance or service, please check “Troubleshooting.” It may save you the cost of a service call. If you still need

help, follow the instructions below. When calling, please know the purchase date and the complete model and serial number of your

appliance. This information will help us to better respond to your request.

If You Need Replacement Parts

If you need to order replacement parts, we recommend that you use only factory specied parts. These factory specied parts will t

right and work right because they are made with the same precision used to build every new JennAir

appliance.

To locate factory specied parts in your area, call us or your nearest JennAir designated service center.

In the U.S.A.

Call the JennAir Customer eXperience Center toll-free:

1-800-JENNAIR (1-800-536-6247) or visit our website at

www.jennair.com.

Our consultants provide assistance with:

■ Scheduling of service. JennAir

appliances designated

service technicians are trained to fulll the product warranty

and provide after-warranty service anywhere in the United

States.

■ Features and specications on our full line of appliances.

■ Referrals to local JennAir

appliance dealers.

■ Installation information.

■ Use and maintenance procedures.

■ Accessory and repair parts sales.

■ Specialized customer assistance (Spanish speaking, hearing

impaired, limited vision, etc.).

For further assistance

If you need further assistance, you can write to JennAir with any

questions or concerns at:

JennAir Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

In Canada

Call the JennAir Canada Customer eXperience Centre toll-free:

1-800-JENNAIR (1-800-536-6247) or visit our website at

www.jennair.ca.

Our consultants provide assistance with:

■ Scheduling of service. JennAir

appliances designated

service technicians are trained to fulll the product warranty

and provide after-warranty service anywhere in Canada.

■ Features and specications on our full line of appliances.

■ Referrals to local JennAir

appliance dealers.

■ Installation information.

■ Use and maintenance procedures.

■ Accessory and repair parts sales.

For further assistance

If you need further assistance, you can write to JennAir Canada

with any questions or concerns at:

Customer eXperience Centre

JennAir Canada

200 - 6750 Century Ave.

Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence.

For accessories in the U.S.A., you can visit our website at www.jennair.com or call us at 1-800-JENNAIR (1-800-536-6247).

In Canada, visit our website at www.jennair.ca or call us at 1-800-JENNAIR (1-800-536-6247).

Affresh

Stainless Steel Cleaner

(stainless steel models)

Affresh

Stainless Steel Cleaning Wipes

(stainless steel models)

Gas Grate/Drip Pan Cleaner

Affresh

Kitchen and Appliance Cleaner

Stainless Steel Grill Cover

Wok Ring

Backguard and Backsplash

Brass Burner Caps

Chrome/Brass Bezels

ASSISTANCE OR SERVICE

ACCESSORIES

Risque possible de décès ou de blessure grave si vous ne

suivez pas immédiatement les instructions.

Risque possible de décès ou de blessure grave si vous

ne suivez pas les instructions.

Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

Votre sécurité et celle des autres est très importante.

Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de

toujours lire tous les messages de sécurité et de vous y conformer.

AVERTISSEMENT

DANGER

Voici le symbole d’alerte de sécurité.

Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous

et à d’autres.

Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou

“AVERTISSEMENT”. Ces mots signifient :

AVERTISSEMENT : Si les renseignements dans ces instructions ne sont pas

exactement observés, un incendie ou une explosion peut survenir, causant des

dommages au produit, des blessures ou un décès.

– Ne pas entreposer ni utiliser de l’essence ou d’autres vapeurs ou liquides inflammables

à proximité de cet appareil ou de tout autre appareil électroménager.

– QUE FAIRE DANS LE CAS D’UNE ODEUR DE GAZ :

•

Ne pas tenter d’allumer un appareil.

•

Ne pas toucher à un commutateur électrique.

•

Ne pas utiliser le téléphone se trouvant sur les lieux.

•

Appeler immédiatement le fournisseur de gaz à partir du téléphone d'un voisin. Suivre

ses instructions.

•

À défaut de joindre votre fournisseur de gaz, appeler les pompiers.

– L’installation et l’entretien doivent être effectués par un installateur qualifié, une agence

de service ou le fournisseur de gaz.

AVERTISSEMENT : L’odorat ne permet pas toujours la détection d’une fuite de gaz.

Les distributeurs de gaz recommandent l’emploi d’un détecteur de gaz (homologation UL ou CSA).

Pour d'autres informations, contacter le fournisseur de gaz local.

En cas de détection d’une fuite de gaz, exécuter les instructions “Que faire dans le cas d’une odeur de gaz”.

INFORMATIONS DE SÉCURITÉ

IMPORTANTES INSTRUCTIONS DE SÉCURITÉ

CONSERVEZ CES INSTRUCTIONS

AVERTISSEMENT :

Pour réduire le risque d’incendie, de

choc électrique, de blessures ou de dommages lors de

l’utilisation de la table de cuisson, il convient d’observer

certaines précautions élémentaires dont les suivantes :

■

AVERTISSEMENT :

NE JAMAIS utiliser cet appareil

comme dispositif de chauffage de la pièce. Le non-respect

de cette instruction peut entraîner une intoxication au

monoxyde de carbone et une surchauffe de la table de

cuisson.

■

MISE EN GARDE –

Ne pas remiser dans des

armoires au-dessus de la table de cuisson, des objets que

des enfants pourraient vouloir atteindre. Les enfants

pourraient se blesser gravement en grimpant sur la table

de cuisson.

■

Installation appropriée – La table de cuisson lorsqu’elle est

correctement installée doit être reliée à la terre

conformément aux codes locaux ou, en l’absence de codes

locaux, selon le

Code national électrique, ANSI/NFPA70 ou

le Code canadien des installations électriques, Partie 1

S’assurer que la table de cuisson est correctement

installée et reliée à la terre par un technicien qualifié.

■

La table de cuisson est munie d’une fiche de liaison à la

terre à trois broches pour votre protection contre les

risques de choc électrique et doit être branchée

directement dans une prise de courant bien reliée à la

terre. Ne pas couper ni enlever la broche de liaison à la

terre de cette fiche.

■ Débrancher l’alimentation électrique avant d’exécuter des

réparations à la table de cuisson.

■

Des blessures peuvent survenir du mauvais usage de la

table de cuisson tel que se tenir debout sur la surface, se

pencher ou s’asseoir sur le dessus de la surface.

■

Entretien – Garder l’espace autour de la table de cuisson

dégagé et exempt de matériaux combustibles, d’essence

et d’autres vapeurs et liquides inflammables.

■ Remisage sur la table de cuisson – Des produits

inflammables ne doivent pas être remisés sur ou près des

éléments de surface.

■

La taille de la flamme des brûleurs de surface devrait être

ajustée de sorte qu’elle ne dépasse pas le bord d’un

ustensile de cuisson.

Ce manuel couvre plusieurs modèles différents. La table de cuisson que vous avez achetée peut comporter l’ensemble des

articles énumérés ou seulement certains d’entre eux. L’emplacement et l’apparence des caractéristiques illustrées peuvent ne pas

correspondre à ceux de votre modèle. Se reporter à ce manuel ou à la section Foire Aux Questions (FAQ) de notre site Web sur

www.jennair.com pour des instructions plus détaillées. Au Canada, consulter la section Service à la clientèle sur www.jennair.ca.

TABLE DE CUISSON

Gril (sur certains modèles)

Grille de la table de cuisson

Plaque à frire électrique (sur certains

modèles)

Garniture d’îlot

Plateau d’égouttement (sur modèles

avec plaque à frire)

Panneau de la console

Modèle de table de cuisson de 48 po (121,9 cm) illustré*

PIÈCES ET CARACTÉRISTIQUES

*La conguration de la table de cuisson peut varier.

PIÈCES ET CARACTÉRISTIQUES

BOUTONS DE COMMANDE

Les fonctions de la table de cuisson sont accessibles à partir des boutons de la table de cuisson.

Témoin lumineux et boutons de la table de cuisson

Bouton arrière gauche

Bouton avant gauche

Bouton de gril

Bouton arrière droit central

Bouton avant droit central

Bouton de la plaque à frire

Témoin de préchauffage de la plaque à frire

Témoin lumineux d’allumage de la plaque à

frire de la table de cuisson

48 PO (121,9 CM)

REMARQUE: La conguration, les fonctions et les commandes de la table de cuisson peuvent

être différentes.

FONCTION DESCRIPTION/COMPORTEMENT INSTRUCTIONS

Témoin lumineux

d’allumage de la

plaque à frire de

latable de cuisson

Témoin lumineux de plaque à frire gauche – Le témoin de

plaque à frire de la table de cuisson en marche s’illumine

lorsque le bouton de la plaque à frire est enmarche.

Témoin de

préchauffage de

laplaque à frire

Témoin lumineux de plaque à frire droite – Le témoin

de préchauffage de la plaque à frire clignote lors du

préchauffage de la plaque à frire. Une fois la température de

préchauffage atteinte, le témoin resteallumé.

Risque d’incendie

La flamme d'un brûleur ne devrait pas dépasser le bord

du récipient de cuisson.

Fermer tous les réglages lorsque la cuisson est

terminée.

Le non-respect de ces instructions peut causer un

décès ou un incendie.

AVERTISSEMENT

Tourner le bouton encore plus loin dans le sens antihoraire vers

Simmer HI et LO (mijotage élevé et faible).

BTU/hr

APPARENCE

DU BRÛLEUR

CARACTÉRISTIQUES

Gros

brûleurs

superpo-

sés

Ce brûleur est muni

d’une amme supérieure

et inférieure. Le réglage

ÉLEVÉ permet d’utiliser les

deux ammes à puissance

maximale pour offrir la plus

grande chaleur. Il est idéal

pour la cuisson de grandes

quantités d’aliments ou

de liquides ou lors de

l’utilisation de grandes

marmites et casseroles.

Lesréglages de mijotage

ÉLEVÉ et FAIBLE n’utilisent

que la amme du bas.

Petit

brûleur

Ce brûleur est recommandé

pour cuisiner de plus petites

quantités d’aliments et pour

faire fondre le chocolat ou le

beurre.

Allumer les brûleurs:

■ Les allumeurs électriques allument automatiquement les

brûleurs de surface quand les boutons de brûleurs sont

placés sur IGNITE (allumage).

■ Avant d’utiliser un bouton de brûleur, placer un ustensile de

cuisson plein sur la grille. Ne pas faire fonctionner un brûleur

avec un ustensile de cuisson vide ou sans ustensile de

cuisson sur la grille.

■ Vérier visuellement que le brûleur est allumé. Si le brûleur

ne s’allume pas, écouter pour savoir si un déclic se produit.

Sil’allumeur n’émet aucun déclic, éteindre le brûleur.

Vériersi le disjoncteur ne s’est pas déclenché ou si

unfusible n’est pas grillé.

■ Vérier que le bouton de brûleur est complètement enfoncé

sur la tige de la soupape. Si l’allumeur ne fonctionne toujours

pas, appeler un technicien de réparation qualié.

■ Lorsque le bouton de brûleur est activé, le brûleur désiré est

tourné à la position ALLUMAGE, ce brûleur émet des déclics

indépendamment des autres brûleurs.

Caractéristique de rallumage Flame-Sensing™

Durant l’utilisation de la table de cuisson, si un ou plusieurs

brûleurs s’éteignent en raison de causes extérieures (tel qu’un

renversement de liquide, un courant d’air ou un mouvement

d’air lié à l’aspiration), le système d’allumage s’active pour

rallumer la flamme. Lorsque la flamme réapparaît, la production

d’étincelles cesse. Si l’on n’élimine pas le courant d’air

dans la pièce, laproduction épisodique d’étincelles peut se

poursuivre. Uneproduction d’étincelles peut aussi se produire

occasionnellement lorsqu’on utilise le débit thermique minimal

sur l’un des brûleurs.

NE PAS OUBLIER: Lors de l’utilisation de la cuisson ou

durant le programme d’autonettoyage, toute la surface de

cuisson peut devenir chaude.

En cas de panne de courant

Tenir une allumette

allumée près d’un

brûleur et tourner le

bouton dans le sens

antihoraire à ÉLEVÉ.

Une fois le brûleur

allumé, tourner le

boutonau réglage

souhaité.

Pour régler un brûleur:

Pousser et tourner

dans le sens

antihoraire

2. Tourner le bouton

dans le sens

antihoraire

pour ALLUMER.

entre ÉLEVÉ et FAIBLE.

BRÛLEURS

CARACTÉRISTIQUES DE LA TABLE DE CUISSON

La page charge ...

Jenn-Air JGCP636HM Le manuel du propriétaire

Marque: Jenn-Air

Modèle: JGCP636HM

Catégorie: Cuisinières

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Jenn-Air JGCP636HM Owner's manual

Jenn-Air JGCP636HM Le manuel du propriétaire

Jenn-Air JGCP636HM Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents