VTech CS5329 Manuel utilisateur

Marque: VTech

Modèle: CS5329

Catégorie: Téléphones

Taper: Manuel utilisateur

Ce manuel convient également à

5329

5329-2

5329-3

5329-4

Click on the in the manual

to watch the video tutorials.

User’s manual

Scan the QR code to go and

subscribe our tutorial channel

Congratulations

on purchasing your new VTech product. Before

using this telephone, please read Important safety

instructions.

This manual has all the feature operations and

troubleshooting necessary to install and operate your

new VTech telephone. Please review this manual

thoroughly to ensure proper installation and operation

of this innovative and feature rich VTech product.

For support, shopping, and everything new at VTech,

visit our website at www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to

phones.vtechcanada.com or call 1 (800) 267-7377.

Compatible with

Hearing Aid T-Coil

TIA-1083

Telephones identiﬁed with

this logo have reduced

noise and interference

when used with most T-coil

equipped hearing aids

and cochlear implants.

The TIA-1083 Compliant

Logo is a trademark of

the Telecommunications

Industry Association. Used

under license.

The ENERGY STAR® program

(www.energystar.gov)

recognizes and encourages

the use of products that save

energy and help protect

our environment. We are

proud to mark this product

with the ENERGY STAR®

label indicating it meets

the latest energy efﬁciency

guidelines.

Important safety instructions

When using your telephone equipment, basic safety

precautions should always be followed to reduce the

risk of ﬁre, electric shock and injury, including the

following:

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on

the product.

3. Unplug this product from the wall outlet before

cleaning. Do not use liquid or aerosol cleaners.

Use a damp cloth for cleaning.

4. CAUTION: Do not install the telephone base at a

height above 2 meters.

5. Do not use this product near water such as near a

bath tub, wash bowl, kitchen sink, laundry tub or a

swimming pool, or in a wet basement or shower.

6. Do not place this product on an unstable table,

shelf, stand or other unstable surfaces.

7. Avoid placing the telephone system in places

with extreme temperature, direct sunlight, or

other electrical devices. Protect your phone from

moisture, dust, corrosive liquids and fumes.

8. Slots and openings in the back or bottom of the

telephone base and handset are provided for

ventilation. To protect them from overheating,

these openings must not be blocked by placing

the product on a soft surface such as a bed, sofa

or rug. This product should never be placed near

or over a radiator or heat register. This product

should not be placed in any area where proper

ventilation is not provided.

9. This product should be operated only from the

type of power source indicated on the marking

label. If you are not sure of the type of power

supply in your home or ofﬁce, consult your dealer

or local power company.

10. Do not allow anything to rest on the power cord.

Do not install this product where the cord may be

walked on.

11. Never push objects of any kind into this product

through the slots in the telephone base or handset

because they may touch dangerous voltage

points or create a short circuit. Never spill liquid of

any kind on the product.

12. To reduce the risk of electric shock, do not

disassemble this product, but take it to an

authorized service facility. Opening or removing

parts of the telephone base or handset other

than speciﬁed access doors may expose you

to dangerous voltages or other risks. Incorrect

reassembling can cause electric shock when the

product is subsequently used.

13. Do not overload wall outlets and extension cords.

14. Unplug this product from the wall outlet and refer

servicing to an authorized service facility under

the following conditions:

• When the power supply cord or plug is

damaged or frayed.

• If liquid has been spilled onto the product.

• If the product has been exposed to rain or

water.

• If the product does not operate normally by

following the operating instructions. Adjust

only those controls that are covered by the

operation instructions. Improper adjustment

of other controls may result in damage and

often requires extensive work by an authorized

technician to restore the product to normal

operation.

• If the product has been dropped and the

telephone base and/or handset has been

damaged.

• If the product exhibits a distinct change in

performance.

15. Avoid using a telephone (other than cordless)

during an electrical storm. There is a remote risk

of electric shock from lightning.

16. Do not use the telephone to report a gas leak in the

vicinity of the leak. Under certain circumstances,

a spark may be created when the adapter is

plugged into the power outlet, or when the

handset is replaced in its cradle. This is a common

event associated with the closing of any electrical

circuit. The user should not plug the phone into

a power outlet, and should not put a charged

handset into the cradle, if the phone is located

in an environment containing concentrations of

ﬂammable or ﬂame-supporting gases, unless

there is adequate ventilation. A spark in such an

environment could create a ﬁre or explosion.

Such environments might include: medical use of

oxygen without adequate ventilation; industrial

gases (cleaning solvents; gasoline vapors; etc.); a

leak of natural gas; etc.

17. Only put the handset of your telephone next to

your ear when it is in normal talk mode.

18. The power adapter is intended to be correctly

oriented in a vertical or ﬂoor mount position. The

prongs are not designed to hold the plug in place

if it is plugged into a ceiling, under-the-table or

cabinet outlet.

19. For pluggable equipment, the socket outlet shall

be installed near the equipment and shall be

easily accessible.

20. Use only the batteries indicated in

this manual. There may be a risk of explosion if

a wrong type of battery is used for the handset.

Use only the supplied rechargeable batteries or

replacement batteries (BT162342/BT262342) for

the handset. Do not dispose of batteries in a ﬁre.

They may explode.

• Do not use the battery in following conditions:

»High or low extreme temperature during

use, storage or transportation.

»Replacement of a battery with an incorrect

type that can defeat a safeguard.

»Disposal of a battery into ﬁre or a hot

oven, or mechanically crushing or cutting

of a battery, that can result in an explosion.

»Leaving a batteryin an extremely high

temperature surrounding environment

that can result in an explosion or the

leakage of ﬂammable liquid or gas.

»A battery subjected to extremely low air

pressure that can result in an explosion or

the leaka

21. Use only the adapter included with this product.

Incorrect adapter polarity or voltage can seriously

damage the product.

22. The applied nameplate is located at the bottom or

near of the product.

SAVE THESE INSTRUCTIONS

Battery

• CAUTION: Use Only Supplied Battery. To

order a replacement, visit out website at

website at www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to

phones.vtechcanada.com or call 1 (800) 267-7377.

• Do not dispose of the battery in a ﬁre. Check

with local waste management codes for special

disposal instructions.

• Do not open or mutilate the battery. Released

electrolyte is corrosive and may cause burns or

injury to the eyes or skin. The electrolyte may be

toxic if swallowed.

• Exercise care in handling batteries in order not to

create a short circuit with conductive materials.

• Charge the battery provided with this product

only in accordance with the instructions and

limitations speciﬁed in this manual.

Precautions for users of implanted cardiac

pacemakers

Cardiac pacemakers (applies only to digital cordless

telephones):

Wireless Technology Research, LLC (WTR), an

independent research entity, led a multidisciplinary

evaluation of the interference between portable

wireless telephones and implanted cardiac

pacemakers. Supported by the U.S. Food and Drug

Administration, WTR recommends to physicians that:

Pacemaker patients

• Should keep wireless telephones at least six inches

from the pacemaker.

• Should NOT place wireless telephones directly over

the pacemaker, such as in a breast pocket, when it is

turned ON.

• Should use the wireless telephone at the ear opposite

the pacemaker.

WTR’s evaluation did not identify any risk to bystanders

with pacemakers from other persons using wireless

telephones.

About cordless telephones

• Privacy: The same features that make a cordless

telephone convenient create some limitations.

Telephone calls are transmitted between the

telephone base and the cordless handset by radio

waves, so there is a possibility that the cordless

telephone conversations could be intercepted

by radio receiving equipment within range of

the cordless handset. For this reason, you should

not think of cordless telephone conversations as

being as private as those on corded telephones.

• Electrical power: The telephone base of this

cordless telephone must be connected to a

working electrical outlet. The electrical outlet

should not be controlled by a wall switch. Calls

cannot be made from the cordless handset if the

telephone base is unplugged, switched off or if

the electrical power is interrupted.

• Potential TV interference: Some cordless

telephones operate at frequencies that may cause

interference to televisions and VCRs. To minimize

or prevent such interference, do not place

the telephone base of the cordless telephone

near or on top of a TV or VCR. If interference is

experienced, moving the cordless telephone

farther away from the TV or VCR often reduces or

eliminates the interference.

• Rechargeable batteries: Exercise care in handling

batteries in order not to create a short circuit with

conducting material such as rings, bracelets and

keys. The battery or conductor may overheat and

cause harm. Observe proper polarity between

the battery and the battery charger.

• Nickel-metal hydride rechargeable batteries:

Dispose of these batteries in a safe manner. Do not

burn or puncture the battery. Like other batteries

of this type, if burned or punctured, they could

release caustic material which could cause injury.

Contents

Install | Set up 10

What’s in the box 10

Connect the telephone base 11

Connect the charger 11

Install the battery 12

Charge the battery 12

Check the battery level 13

Check for dial tone 13

Before use 14

Set date and time (before use) 14

Set up through voice guide -

Answering system (before use) 14

Alternate way to set up 15

Install 15

Mount the telephone base 15

Overview 16

Telephone base 16

Handset 17

Display 19

Handset lights 19

Telephone base lights 20

Operating range 20

Operate 21

Make, answer or end a call 21

Make a call 21

Predial a call 21

Answer a call 21

End a call 21

View dialing options 21

Sound 22

Use speakerphone 22

Volume control 22

Mute the microphone 22

Temporary ringer silencing 22

Join a call 23

Join a call in progress (for

multiple handset models only) 23

Call waiting 23

Intercom 24

Initiate an intercom call 24

Answer an incoming call during

an intercom call 24

Transfer a call via intercom 25

Find handset 26

Page/ ﬁnd handset 26

Use phone menu 26

Phonebook |

Phonebook entry 27

Add a phonebook entry 27

Review the phonebook entries 28

Dial a phonebook entry 28

Delete a phonebook entry 28

Delete all phonebook entries 28

Edit a phonebook entry 29

Alphabetical search 30

Redial list 31

Review a redial list entry 31

Dial a redial list entry 31

Delete a redial list entry 31

Chain dialing 32

Caller ID 33

Review the caller ID log 33

Save a caller ID log entry to the

phonebook 33

Save a caller ID log entry to call

block list 34

Dial a caller ID log entry 35

Delete caller ID log entries 35

Caller ID memory match 35

Missed call indicator 36

Call block 36

Block unknown calls 36

Add a call block list entry 36

Review call block list 37

Edit a call block list entry 37

Save a caller ID log entry to the

call block list 38

Unblock a telephone number 38

Mute ﬁrst ring 38

Answering system 39

Difference between the built-in

answering system and voicemail

service 39

Use your built-in answering

system 40

Turn on or off the answering

system 40

Playback messages 41

Adjust listening volume during

message playback 42

Skip to the next message 42

Repeat the playing message 42

Listen to previous message 42

Stop the message playback 42

Delete a message 42

Delete all messages 43

Answering system remote access 43

Call intercept while using

answering system 44

Recording memo 44

Turn on or off the call screening 45

Screen a call with answering

system 45

Contents

Announcement 46

Record a new outgoing

announcement 46

Play your announcement 46

Delete your annoucement 47

Voicemail (via Telephone

service provider) 47

Turn off the new voicemail

indicators 48

Conﬁgure | Settings 48

Answering system settings 48

Set your built-in answering

system 48

Set answering system through

voice guide 49

Set voice language 49

Set remote access code 50

Turn on or off the message

alert tone 50

Dial modes 51

Temporary tone dialing 51

Set dial mode 51

Ringer 52

Set ringer tone 52

Set ringer volume 52

Set date and time 53

Set languages 53

Set LCD language 53

Sound settings 54

Set number of rings 54

Set QUIET mode 54

Set listening volume 55

Set key tone 55

Voicemail settings 55

Set speed dial voicemail number 55

Add and register handset 56

General product care 57

Taking care of your telephone 57

Avoid rough treatment 57

Avoid water 57

Electrical storms 57

Cleaning your telephone 57

Technical speciﬁcations 57

DECT 6.0 digital technology 58

Telephone operating range 58

Redeﬁning long range

coverage and clarity 58

Simulated full-duplex handset

and base speakerphones 58

Frequently asked questions 59

The RBRC seal 62

FCC, ACTA and IC regulations 62

California Energy Commission

battery charging testing

instructions 64

For C-UL compliance only 64

10 11

Install | Set up

What’s in the box

Your telephone package contains the

following items. Save your sales receipt

and original packaging in case it is

necessary to ship your telephone for

warranty service.

NOTE

• To purchase replacement batteries

or power adapters, visit our website

at www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to

phones.vtechcanada.com or dial

1 (800) 267-7377.

Quick

start

guide

• 1 set for CS5329

• 2 sets for CS5329-2

• 3 sets for CS5329-3

• 4 sets for CS5329-4

• 1 set for CS5329-2

• 2 sets for CS5329-3

• 3 sets for CS5329-4

Connect the telephone base

TIPS

• If you want to mount the base, make

sure telephone line pass through the

mounting bracket before connecting

to the DSL ﬁlter.

• If you subscribe to digital subscriber

line (DSL) high-speed Internet

service through your telephone line,

make sure you connect a DSL ﬁlter

(not included) to the telephone wall

jack.

Connect the charger

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT162342/BT262342 (2.4V 300mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1951

12 13

Install the battery

1. Plug the battery connector securely

into the socket inside the handset

battery compartiment.

• Make sure the battery label THIS

SIDE UP is facing up, as indicated.

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT183342/BT283342 (2.4V 400mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1535

THIS SIDE UP

2. Align the cover ﬂat against the battery

compartment, then slide it upwards

until it clicks into place.

RS LE HAUT

h Ni-MH)

BATTERIES.

ES PILES.

CR1535

Charge the battery

The following table summarizes the

battery indicators and actions to take.

Battery

indicators

Battery

status

Action

• The screen

is blank, or

shows Put in

charger and

ﬂashes.

• The battery

has no

charge or

very little

charge. The

handset

cannot be

used.

• Charge

without

interruption

(at least 30

minutes).

• The screen

shows Low

battery and

ﬂashes.

• The battery

has enough

charge to be

used for a

short time.

• Charge

without

interruption

(at least 30

minutes).

• The screen

shows

HANDSET X.

• The battery is

charged.

• To keep

the battery

charged,

place it in

the handset

charger

when not in

use.

When it is fully charged, you can expect

the following performance:

Operation • Operating time *

Talk time (cordless

handset)

• 7 hours

Standby • 5 days

* Operating times vary depending

on your actual use and the age of the

battery.

Check the battery level

After you have installed the battery,

check the battery level on the handset

screen.

• If the screen is blank, or ﬂashes,

then the battery needs to be

charged. Go to Charge the battery

section before you do any setting or

operation.

• If the battery icon is , , or , then

go to Set the date and time and

Set the answering system through

voice guide section.

Check for dial tone

Press . If you hear a dial

tone, the installation is successful.

If you do not hear a dial tone

• Make sure the installation

procedures are properly done.

• The handset may take a second or

two to ﬁnd the telephone base and

produce a dial tone. This is normal.

Wait an extra second before dialing.

• If the previous suggestions do not

work, disconnect the telephone

line cord from your telephone and

connect the telephone line cord to

another telephone.

• If there is no dial tone on that other

telephone either, your telephone

line cord may be defective. Install a

new telephone line cord.

• If changing the telephone line

cord does not help, the wall jack

(or the wiring to this wall jack) may

be defective. Try using a different

wall jack in your home to connect

your CS5329/CS5329-2/CS5329-3/

CS5329-4 telephone, or contact your

telephone service provider (charges

may apply).

12 hrs

14 15

Before use

Set date and time (before use)

After you install your telephone or

power returns following a power outage

and battery depletion, the handset will

prompt you to set the date and time,

and to conﬁgure the answering system

through voice guide.

NOTE

• Make sure you set the date and

time including the year correctly;

otherwise the answering system does

not announce the correct day of the

week for your recorded messages

time stamp.

1. Use the dialing keys (0-9) to enter the

month (MM), date (DD) and year (YY).

Then, press .

2. Use the dialing keys (0-9) to enter the

hour (HH) and minute (MM). Then

press q CID or p to choose AM

or PM.

3. Press to save.

After setting the date and time, the

handset will prompt if you want to set

Answering system (before use).

TIP

• To skip setting the date and time,

press on the handset.

Set up through voice guide - Answering

system (before use)

After the date and time setting is done or

skipped, the handset will then prompt if

you want to set up the answering system.

This feature assists you to do the basic

setup of the answering system. You can

follow the voice guide to record your

own announcement, set the number of

rings and the message alert tone.

1. Press to start the

answering system setup via voice

guide. You hear the voice prompt “

Hello! This voice guide will assist you

with the basic setup of your answering

system.”

• To skip the set up, press

2. Setup your answering system by

inputting the designated numbers as

instructed in the voice guide.

Alternate way to set up

1. Press on the

telephone base in idle mode.

2. Press q CID or p to scroll to

Answering sys, and then press

3. Press q CID or p to scroll to Voice

guide, the press .

You hear the voice prompt “Hello!

This voice guide will assist you with

the basic setup of your answering

system.”

4. Set up your answering system by

inputting designated numbers as

instructed in the voice guide.

NOTE

• You can press to quit

the voice guide at any time.

Install

Mount the telephone base

Your telephone base is ready for tabletop

use. If you want to mount your telephone

on a wall, use the provided wall-mount

bracket to attach to a standard dual-stud

telephone wall-mounting plate.

If you do not have this wall-mounting

plate, you can purchase one from many

hardware or consumer electronics

retailers. You may need a professional to

install the wall-mounting plate.

16 17

Overview

Telephone base

light

• On when the phone

is in use, or when the

answering system is

answering a call.

• On when a handset is

being registered.

• Flashes when there is

an incoming call.

• Flashes when

handsets are being

deregistered.

• Flashes when another

telephone on the

same line is in use.

2Message

window

• Shows the number of

unread messages.

• X/DELETE

• Press to delete

the message or

announcement

currently playing.

• When the phone

is not in use, press

twice to delete all

previously reviewed

messages.

• /REPEAT

• Press to repeat a

message or press

twice to play the

previous message.

• /SKIP

• During message

playback, press to skip

to the next message.

• /PLAY/STOP

• Press to play

messages.

• Press to stop message

playback.

• Flashes when there

are new messages

or memos in the

answering system.

4- VOL +

• Press to adjust the

listening volume during

a call.

• When the phone is not

in use, press to adjust

the telephone base

ringer volume.

5 ANS ON

• Press to turn on the

answering system and

press again to turn off.

The light is on when on

the answering system is

on.

6 /

FIND HS

• Press the button to page

all system handsets.

7Charging pole

Handset

1Handset earpiece

2LCD display

3MENU/

SELECT

• Press to display the

menu.

• Once in the menu, press

to select an item or save

an entry or setting.

/ pVOLUME

• Press to show

phonebook entries

when the telephone is

not in use.

• Press to scroll up while

in a menu.

• Press to increase the

listening volume when

on a call, or increase

the message playback

volume.

• While entering names

or numbers, press to

move the cursor to the

right.

18 19

VOLUMEq/CID

• Press to review the

caller ID log when the

telephone is not in

use.

• Press to scroll down

while in a menu.

• Press to decrease the

listening volume when

on a call, or decrease

the message playback

volume.

• While entering names

or numbers, press to

move the cursor to the

left.

5OFF/

CANCEL

• During a call, press to

hang up.

• While in a menu, press

to cancel an operation,

back up to the previous

menu, or exit the menu

display; or press and

hold this button to exit

to idle mode.

• When the handset is

ringing, press to mute

the ringer temporarily.

• Press and hold while

the handset is not in use

to erase the missed call

indicator.

6QUIET #

• Press and hold to set

and turn on the QUIET

mode, or turn it off.

• When reviewing a

caller ID log entry, press

repeatedly to view other

dialing options.

7INT

• Press to start an intercom

conversation or transfer

a call (for multi-handset

models only).

8MUTE/

DELETE

• Mute the microphone

during a call.

• Delete digits or

characters while using

the dialing keys.

• Silence the ringer

temporarily while the

handset is ringing.

9CHARGE

light

• On when the handset

is charging in the

telephone base or

charger.

10 REDIAL/

PAUSE

• Press repeatedly to view

the last 10 numbers

dialed.

• While entering numbers,

press and hold to insert a

dialing pause.

TALK/

FLASH

• Press to make or answer

a call.

• During a call, press to

answer an incoming call

when you receive a call

waiting alert.

12 1

• While reviewing a caller

ID log entry, press

repeatedly to add or

remove 1 in front of

the telephone number

before dialing or saving

it in the phonebook.

• Press and hold to set

or dial your voicemail

number.

• Press to switch to tone

dialing temporarily

during a call if you have

pulse service.

• Press to make or

answer a call using the

speakerphone.

• Press to turn on the

handset speakerphone,

press again to resume

normal handset use.

15 Microphone

1Charging pole

Display

HANDSET

ECO

NEW

ANS ON

10:15pm

MSG#

5/10

1• The battery is low

and needs charging.

2• The battery is

charging.

3• The battery is fully

charged.

4• Handset ringer is off.

• New voicemail

received from your

telephone service

provider.

NEW

• New caller ID log

entry.

7ANS ON • Answering system is

on.

MSG#

5/10 • Number of new/old

messages recorded.

9ECO

• The ECO

mode activates

automatically to

reduce power

consumption when

the handset is

within range of the

telephone base.

Handset lights

1CHARGE

• On when the

handset is charging

in the telephone

base or charger.

• On when the

speakerphone is in

use.

20 21

Telephone base lights

1IN USE

• On when the telephone

line is in use.

• On when the answering

system is answering a

call.

• On when you are

registering a handset.

• Flashes quickly when

there is an incoming call.

• Flashes when another

telephone sharing the

same line is in use.

• Flashes when you

are deregistering all

handsets.

2 ANS ON • On when the answering

system is turned on.

Operating range

This cordless telephone operates with

the maximum power allowed by the

Federal Communications Commission

(FCC). Even so, this handset and

telephone base can communicate over

only a certain distance which can vary

with the locations of the telephone base

and handset, the weather, and the layout

of your home or ofﬁce.

When the handset is out of range, the

handset displays Out of range or no pwr

at base.

If there is a call while the handset is out

of range, it may not ring, or if it does

ring, the call may not connect well when

you press . Move closer

to the telephone base, and then press

to answer the call. If

the handset moves out of range during

a telephone conversation, there may

be interference. To improve reception,

move closer to the telephone base.

Operate

Make, answer or end a call

Make a call

Press or on the

handset, then enter the telephone

number.

Predial a call

Enter the telephone number, then press

or to dial.

Answer a call

Press or , or any

dialing keys (0-9 or or QUIET#).

End a call

Press or put the handset

in the telephone base or charger.

NOTES

• The handset displays Unable to call if

the telephone line is in use.

• The screen shows the elapsed time

as you talk (in hours, minutes and

seconds).

• When predialing (preview numbers

before dialing), press

on the handset to backspace

and delete; press and hold

to insert a dialing

pause (a P appears).

View dialing options

The incoming caller ID log entries have

10 digits (the area code plus the seven-

digit number). You can add 1 in front

of the telephone number before you

dial in the caller ID log or store to the

phonebook.

While reviewing the caller ID log, press

# (pound key) or 1 repeatedly to add

or remove 1 in front of the telephone

number before dialing or saving it in

the phonebook.

When the number shows the correct

format for dialing:

Press or on the

handset to call the number.

To save the number to the phonebook,

see Save a caller ID log entry to the

phonebook.

22 23

Sound

Use speakerphone

During a call, press to switch between

the speakerphone and normal handset

use.

To hand up, press or return

the handset to the telephone base or

charger.

Volume control

During a call, press VOLUMEq or

VOLUMEp to adjust the listening

volume.

Mute the microphone

Use the mute function to turn off the

microphone. You can hear the caller, but

the caller cannot hear you.

To mute a call

While on a call, press on

the handset. The screen displays Muted

until the mute function is turned off.

To end mute a call

Press on the handset

again and resume speaking. The screen

brieﬂy displays Microphone on.

Mute is automatically cancelled when

you end the call.

Temporary ringer silencing

When the telephone is ringing, you can

temporarily silence the ringer of the

handset without disconnecting the call.

The next call rings normally at the preset

volume.

To silence the handset ringer

Press or on

the handset. The handset screen shows

Ringer muted.

To silence the telephone base ringer

Press VOL - once.

Join a call

Join a call in progress (for multiple

handset models only)

Another handset can join you on a call.

You can use up to four handsets at a

time on an outside call.

• When a handset is already on a call,

• press or on

another handset to join the call.

• Press or place the

handset in the telephone base or

handset charger to exit the call. The

call continues on the other handset

until both handsets hang up.

Call waiting

If you subscribe to call waiting service

from your telephone service provider,

and someone calls while you are already

on a call, you hear an alert tone.

1. Press on the handset

to put your current call on hold and

take the new call.

2. Press on the handset

at any time to switch back and forth

between calls.

If you also subscribe to caller ID service, it

will let you see the name and telephone

number of the caller during call waiting.

It may be necessary to change your

telephone service to use this feature.

Contact your telephone service provide

if:

• You have both caller ID and call

waiting, but as separate service

(you may need to combine these

service);

• You have only caller ID service, or

only call waiting service; or

• You do not subscribe to caller ID or

call waiting services.

There are fees for caller ID services. In

addition, services may not be available

in all areas.

24 25

Intercom

Use the intercom feature for conversations

between two handsets.

NOTES

• Your CS5329/CS5329-2/CS5329-3/

CS5329-4 telephone base supports

up to ﬁve handsets. You can buy

additional expansion handsets

(CS5309, available in US version only)

for your CS5329/CS5329-2/CS5329-3/

CS5329-4 telephone system.

• You can use four handsets on two

pairs of intercom calls. For example,

when four handsets are used on two

pairs of intercom calls, use the ﬁfth

handset for an outside call.

Initiate an intercom call

1. Press INT on your handset when not

in use.

• If you have only one handset, your

handset displays INT needs 2 HS.

• If you have two handsets, your

handset displays Calling HS X.

• If you have three or more

handsets, your handset displays

Intercom to. Use the dialing keys

to enter a destination handset.

Your handset displays Calling HS

The destination handset rings and its

screen displays HS X is calling.

2. To answer the intercom call, press

, , INT or any

dialing key on the destination handset.

Both handsets now display Intercom.

3. To end the intercom call, press

or place the handset

back in the telephone base or charger.

Both handsets now display Intercom

ended.

NOTES

• To cancel the intercom call before it is

answered, press or INT.

• Press or

on the destination handset to

temporarily silence the intercom

ringer.

• If the destination handset does not

answer the intercom call within 100

seconds, is accessing the answering

system, on a call or out of range, the

originating handset displays Unable

to call and returns to idle mode.

• If there is an incoming call while the

originating handset displays Calling

HS X, the intercom request will be

stopped and the screen displays

Incoming call.

Answer an incoming call during an

intercom call

When you receive an outside call during

an intercom call, there is an alert tone.

• To answer the outside call, press

. The intercom call

ends automatically.

• To end the intercom call without

answering the outside call, press

. The telephone

continues to ring.

Transfer a call via intercom

Use the intercom feature to transfer an

outside call to another system handset.

1. During a call, press INT.

• If you have two handsets, the

outside call is put on hold and

your handset displays Calling HS

• If you have three or more

handsets, your handset displays

Intercom to. Use the dialing keys

to enter a handset number. The

outside call is put on hold and

your handset displays Calling HS

The destination handset rings and its

screen displays HS X is calling.

2. To answer the intercom call on

the destination handset, press

, , INT or any

dialing key on the destination

handset. The outside call is still on

hold and both handsets now display

Intercom. You can now have a private

conversation with the destination

handset.

• To cancel the intercom call

before it is answered, press

, or INT.

• If the destination handset does

not answer within 100 seconds,

is in use, on a call or is out of

range, the originating handset

displays Unable to call and then

reconnects to the outside call.

3. For this intercom call, you have the

following options:

• You can let the destination

handset join you on the outside

call in a three-way conversation.

Press and hold INT on the

originating handset.

• You can transfer the call. Press

, or place your

handset back in the telephone

base or charger. Your handset

displays Line in use. The

destination handset is then

connected to the outside call.

• You can press INT to switch

between the outside call (Outside

call displays) and the intercom call

(Intercom displays).

• The destination handset can end

the intercom call by pressing

, or by placing the

handset back in the telephone

base or charger. The outside call

continues with the original system

handset.

26 27

Find handset

Page/ ﬁnd handset

CAUTIONS

• Do not press and hold /FIND HS for

more than four seconds. It may lead

to handset deregistration.

• If the handset displays To register HS...

and ...see manual, refer to Add and

handset back to the telephone base.

This feature helps you ﬁnd all system

handsets.

To start paging

Press /FIND HS on the telephone base

when it is not in use. All idle handsets ring

and display ** Paging **.

To end paging

• Press , ,

or any dialing key (0-9,

or QUIET#) on the handset ;

-OR-

• Press /FIND HS again on the

telephone base;

-OR-

• Place the handset in the telephone

base or charger.

NOTES

• If you press on a

handset, the ringer of that handset

is silenced but the paging tone

continues on the other handsets.

• If a handset is accessing the answering

system, on a call (intercom call or

outside call), or out of range, that

handset does not beep when paged.

• You cannot use the ﬁnd handset

feature while the telephone base is

playing messages or the answering

system is being accessed remotely.

Use phone menu

1. Press in idle mode

(when the telephone is not in use) to

enter the main menu.

2. Press q CID or p to scroll through

menu items.

3. Press to select or save

the highlighted item.

-OR-

Press to cancel an

operation, back up to the previous

menu, or exit the menu display.

Phonebook |

Phonebook entry

The phonebook can store up to

50 entries, which are shared by all

handsets. Each entry may consist of a

telephone number up to 30 digits, and

a name up to 15 characters.

Any additions, deletions or edits made

on one handset will be reﬂected on

other handsets.

If the telephone number in the

phonebook exceeds 15 digits, a dash

appears after the 14th digit and then the

remaining digits are shown beginning

with a dash, alternately.

Add a phonebook entry

1. Enter the number when the phone

is not in use. Press ,

then go to Step 3.

-OR-

Press on the handset

in idle mode., then press q CID or

p to highlight Phonebook. Press

twice to choose Add

new entry.

• The screen shows Enter number.

2. Use the dialing keys to enter a

telephone number (up to 30 digits).

• Press q CID or p to move the

cursor to the left or right.

• Press on the

handset to erase a digit.

• Press and hold on

the handset to erase all digits.

• Press and hold

to insert a three-second dialing

pause (a P appears). -OR-

Press to copy

a number from the redial list.

Press q CID or p , or press

repeatedly to

locate the desired number.

Press to copy the

displayed number.

3. Press to proceed to

entering name.

• The screen shows Enter name.

4. Use the dialing keys to enter a

name (up to 15 characters) when

prompted.

• Press a key repeatedly until the

desired character shows on the

screen.

• Press q CID or p to move the

cursor to the left or right.

• Press 0 to add a space.

• Press on the

handset to erase a character.

• Press and hold

on the handset to erase all

characters.

5. Press to store your

new phonebook entry.

28 29

Review the phonebook entries

1. Press p when in idle mode.

• The screen shows the number of

entries.

2. Press q CID or p to browse

through the phonebook or use the

dialing keys to start a name search.

-OR-

1. Press when in idle

mode.

2. Press q CID or p to scroll to

Phonebook, then press .

3. Press q CID or p to scroll to

Review, then press .

• The screen shows the ﬁrst entry in

the phonebook.

4. Press q CID or p to scroll to browse

through the phonebook.

• Entries appear alphabetically by

the ﬁrst letter in the name.

Dial a phonebook entry

1. Search for the desired entry in

the phonebook (see Review the

phonebook entries or Alphabetical

search).

2. When the displayed number is in the

correct format, press

or on the handset to dial.

Delete a phonebook entry

1. While reviewing a phonebook

entry (see Review the phonebook

entries or Alphabetical search), press

• The screen shows Delete entry?.

2. Press to delete the

displayed entry from the phonebook.

• The handset shows Deleting... and

then you hear a conﬁrmation tone.

NOTE

• Once deleted, you cannot retrieve

that entry.

Delete all phonebook entries

1. Press on the handset

when in idle mode.

2. Press q CID or p to scroll to

Phonebook, then press .

3. Press q CID or p to scroll to Delete

all, then press .

• The handset shows Delete all?.

4. Press to conﬁrm.

• The handset shows Deleting....

You hear a conﬁrmation tone.

Edit a phonebook entry

1. While reviewing a phonebook entry,

press .

• The screen shows Enter number

with the current number of the

entry.

2. Use the dialing keys to edit the

number (up to 30 digits).

• Press q CID or p to move the

cursor to the left or right.

• Press and hold

to insert a three-second dialing

pause (a P appears).

• Press on the

handset to erase a digit.

• Press and hold

on the handset to erase all

digits. -OR- Copy a number

from the redial list by pressing

and then

q CID or p , or pressing

repeatedly

to locate the desired number.

Press to copy the

number.

3. Press to save the

number.

• The screen shows Enter name

brieﬂy and then the current name

of the entry.

4. Edit the characters.

• Press 0 to add a space.

• Press q CID or p to move the

cursor to the left or right.

• Press on the

handset to erase a character.

• Press and hold

on the handset to erase all

characters.

5. Press to save.

• The handset shows the updated

entry.

30 31

Alphabetical search

You can use the enhanced 3-character

search to ﬁnd your contacts quickly and

efﬁciently.

1. Press p when the handset is in idle

mode.

2. When an entry appears, use the

dialing keys (0-9) to start a name

search (alphabetical search).

• The phonebook shows the ﬁrst

name beginning with the ﬁrst

letter associated with the dialing

key, i.e. if there is an entry in the

phonebook that begins with that

letter.

• Press q CID or p to scroll

through the entries beginning

with that letter.

3. To see other names that start with the

letters on the same dialing key, keep

pressing the key until the desired

letter is shown.

• The names appear in alphabetical

order.

For example, if you have the names

Jennifer, Jessie, Kevin and Linda in your

phonebook:

If you press 5 (JKL) once, J and then

Jennifer displays.

If you press 5 (JKL) once, J displays. Press

q. Jessie displays.

If you press 5 (JKL) twice, K and then

Kevin displays.

If you press 5 (JKL) three times, L and

then Linda displays.

If you press 5 (JKL) four times, 5 displays.

If you press 5 (JKL) ﬁve times, J displays

and then Jennifer displays again.

NOTE

• If you press a dialing key (0-9) and

no name starts with any letter on that

key, the phonebook shows the entry

that matches the next letter in the

phonebook.

Redial list

Each handset stores the last 10 telephone

numbers dialed. Entries are shown in

reverse chronological order. When

there are already 10 entries, the oldest

entry is deleted to make room for the

new entry.

Review a redial list entry

1. Press in idle mode.

2. Press p , q CID or

repeatedly to browse until the

desired number displays. The

handset beeps twice at the end of

the list.

3. Press on the handset

to exit.

Dial a redial list entry

When the desired redial entry displays,

press or to dial.

- OR -

1. Press or .

2. Press to enter the

redial list.

3. Press p , q CID or

repeatedly to browse until the

desired entry displays.

4. Press to dial the

displayed number.

Delete a redial list entry

1. Press in idle mode.

2. Press p , q CID or

repeatedly to browse until the

desired number displays.

3. Press on the handset

to delete the displayed number.

• You hear a conﬁrmation tone.

32 33

Chain dialing

Use this feature to initiate a dialing

sequence from numbers stored in the

phonebook, caller ID log or redial list

while you are on a call.

Chain dialing is useful if you wish to

access other numbers (such as bank

account numbers or access codes) from

the phonebook, caller ID log or redial

list.

Access a number in the phonebook

while on a call

1. Press .

2. Press to select

Phonebook .

3. Press q CID or p to scroll to

the desired entry or perform an

alphabetical search, then press

to dial the displayed

number.

Access a number in the caller ID log

while on a call

1. Press .

2. Press q CID or p to scroll to Caller

ID log, then press .

3. Press q CID or p to scroll to

the desired entry, and then press

to dial the displayed

number.

Access the redial list while on a call

1. Press .

2. Press p , q CID or

until the desired number displays.

3. Press to dial the

displayed number.

NOTES

• You cannot edit a phonebook entry

while on a call.

• You cannot copy a caller ID log entry

into the phonebook while on a call.

• You can only view the numbers in the

phonebook, caller ID log or redial list

while on a call and cannot edit, delete

or save entries.

• Press on the handset to

exit redial list, phonebook or caller ID

log while on a call.

Caller ID

If you subscribe to caller ID service,

information about each caller appears

after the ﬁrst or second ring. If

you answer a call before the caller

information appears on the screen, it

will not be saved in the caller ID log.

The caller ID log stores up to 30 entries.

Each entry has up to 24 digits for the

phone number and 15 characters for

the name.

Review the caller ID log

Review the caller ID log to ﬁnd out who

called, to return the call or to copy the

caller’s name and number into your

phonebook.

1. When a handset is in idle mode,

press q CID to view the caller ID

starting with the most recent call.

-OR-

You can also review the caller ID

log by pressing in

idle mode, then press q CID or p

to scroll to Caller ID log. Press

twice to select

Review.

2. Press q CID or p to scroll through

the list. The handset beeps twice

when you reach the beginning or

end of the caller ID log.

3. Press to exit the caller

ID log.

Save a caller ID log entry to the

phonebook

1. While reviewing the caller ID log,

press q CID or p to browse

through the caller ID log.

2. When the desired entry displays,

press .

3. Press again to choose

To Phonebook.

4. When the screen shows Enter

number, use the dialing keys to

modify the telephone number (up

to 30 digits).

• Press q CID or p to move the

cursor to the left or right.

• Press and hold to

enter a 3-second dialing pause (a

P appears).

• Press to erase a

digit.

• Press and hold to

erase all digits.

5. Press to save the

number in the display.

• The screen shows Enter name.

6. Use the dialing keys to modify the

name (up to 15 characters).

• Press 0 to add a space.

• Press q CID or p to move the

cursor to the left or right.

• Press on the

handset to erase a character.

• Press and hold

on the handset to erase all

characters.

7. Press to save.

• You hear a conﬁrmation tone.

34 35

NOTES

• If a number is already in the

phonebook. You cannot save the

same number more than once.

• If you try to save a caller ID log entry

to the phonebook without a number,

the handset sounds an error tone.

• If the telephone number has more

than 15 digits, only the last 15 digits

appear in the caller ID log. However,

the telephone can still save all digits

(up to 24 digits) of that telephone

number from the caller ID log in the

phonebook.

• You might need to change how a caller

ID number is saved in the phonebook

if the entry does not appear in the

correct format. Caller ID numbers

might appear with an area code that is

not necessary for local calls, or without

a 1 that is necessary for long distance

calls.

• Caller ID log entries are shared by all

system handsets. Any deletions made

on one handset are reﬂected on all

other handsets.

Save a caller ID log entry to call block

list

1. Search for the desired caller ID log

entry (see Review call block list).

2. When the desired entry displays,

press .

3. Press q CID or p to scroll to To

Block list, then press .

4. The handset displays Enter number.

Use the dialing keys to edit the

number, when necessary.

• Press q CID or p to move the

cursor to the left or right.

• Press to backspace

and erase a digit.

• Press and hold to

erase the entire entry.

• Press and hold to

enter a 3-second dialing pause (a P

appears).

5. Press to move to the

name.

• The screen shows Enter name.

6. Use the dialing keys to to add or edit

the name.

• Press q CID or p to move the

cursor to the left or right.

• Press 0 to add a space.

• Press on the

handset to erase a character.

• Press and hold on

the handset to erase all characters.

7. Press to save.

Dial a caller ID log entry

1. Search for the desired entry in the

caller ID log (see Review the caller

ID log).

2. When the desired entry is displayed

and is in the correct format for

dialing:

• Press or

on the handset to dial with the

home line.

Delete caller ID log entries

1. Search for the desired entry in the

caller ID log (see Review the caller

ID log).

2. When the desired entry is displayed,

press on the handset.

You hear a conﬁrmation tone.

To delete all entries

1. Press on the handset

in idle mode.

2. Press q CID or p to highlight Caller

ID log, then press .

3. Press q CID or p to highlight

Delete all, then press .

4. When the screen shows Delete all?,

press to conﬁrm.

• There is a conﬁrmation tone

and the screen returns to the

previous menu.

Caller ID memory match

If the incoming telephone number

matches the last 7 digits of a telephone

number in your phonebook, the name

that appears on the screen matches

the corresponding name in your

phonebook.

For example, if Christine Smith calls,

her name appears as Chris if this is how

you entered it into your phonebook.

NOTE

• The number you see on your caller ID

is in the format sent by the telephone

service provider. It usually delivers

10-digit telephone numbers (area

code plus telephone number). If

the last 7 digits of the incoming

telephone number do not match

a number in your phonebook, the

name appears as it is delivered by

the telephone service provider.

36 37

Missed call indicator

When a cordless handset or the

telephone base is in idle mode and has

new or missed calls, its screen shows XX

Missed calls.

All new and missed entries are counted

as missed calls. Each time you review a

new caller ID log entry (indicated by

NEW

on the screen), the missed calls

message goes away. When there is a

new unanswered call, the missed calls

message displays again. The number of

missed calls includes all new

and missed entries that have not been

reviewed.

If you do not want to review the missed

calls one by one, but still want to keep

them in the caller ID log, you can press

and hold on the handset

for four seconds when the handset is

idle.

• You will hear a conﬁrmation tone.

• All the entries in the caller ID log

become old (reviewed already).

• Missed calls message disappears.

Call block

If you have subscribed to caller ID service,

you can set the telephone to block

unknown calls and certain undesired

calls. The call block list can store up to

150 entries.

When a call is blocked, the caller will

hear a simulated busy tone for one ring

cycle. The call recipient may pick up the

call during the ﬁrst ring when there is no

caller ID information. Otherwise, the call

is disconnected.

Block unknown calls

All incoming calls with unknown numbers

will be blocked.

1. Press when the phone

is not in use.

2. Press q CID or p to select Call block

and then press .

3. Press q CID or p to select Calls

w/o num then press .

4. Press q CID or p to choose Unblock

or Block, then press .

You hear a conﬁrmation tone.

Add a call block list entry

1. Press when the phone

is not in use.

2. Press q CID or p to select Call block

and then press .

3. Press to choose Block

list.

4. Press q CID or p to select Add

new entry then press .

5. When Enter number displays, use

the dialing keys to enter the number.

-OR-

Copy a number from the redial list by

pressing and then

press p , q CID or

repeatedly to select a number. Press

to copy the number.

6. Press to move on to

enter the name. The handset displays

Enter name.

7. Use the dialing keys to enter the

name. Additional key presses show

other characters of that particular

key. The ﬁrst character of every word

is capitalized.

8. Press to save. You

hear a conﬁrmation tone.

While entering names and numbers,

you can:

• Press to backspace

and erase a digit or character.

• Press and hold to

erase the entire entry.

• Press q CID or p to move the

cursor to the left or right.

• Press and hold to

insert a dialing pause (for entering

numbers only).

• Press 0 to add a space (for entering

names only).

Review call block list

1. Press when the

phone is not in use.

2. Press q CID or p to select Call

block and then press .

3. Press to choose Block

list.

4. Press to choose

Review.

5. Press q CID or p to browse

through the call block list.

Edit a call block list entry

1. Search for the desired entry in the

call block list (see Review call block

list).

2. When the desired entry appears,

press . The handset

displays Enter number and the

stored number.

3. Use the dialing keys to edit the

number, then press

. The handset displays Enter name

and then the stored name.

4. Use the dialing keys to edit the

name. Additional key presses show

other characters of that particular

key. The ﬁrst character of every word

is capitalized.

5. Press to save. You

hear a conﬁrmation tone.

38 39

Save a caller ID log entry to the call block

list

1. When in the caller ID log, press q CID

or p to browse.

2. When the desired caller ID log entry

displays, press twice

to choose To Call block. The handset

displays Enter number and the stored

number.

3. Use the dialing keys to modify the

number, if necessary. Then press

. The handset displays

Enter name and then the stored name.

4. Use the dialing keys to modify the

name, if necessary. Then press

to save. You hear a

conﬁrmation tone.

Unblock a telephone number

1. Press when the phone

is not in use.

2. Press q CID or p to select Call block

and then press .

3. Press to choose Block

list.

4. Press to choose

Review.

5. Press q CID or p to browse through

the call block list.

6. When the desired call block list entry

displays, press and

you hear a conﬁrmation tone.

Mute ﬁrst ring

Your telephone rings once for blocked

calls. You can choose to mute the ﬁrst ring

for all incoming calls, so that there will be

no ring for blocked calls. By default, the

ﬁrst ring is set to On.

1. Press when the

handset is not in use.

2. Press 7464# on the handset.

3. Press q CID or p to choose First

ring:On to keep the ﬁrst ring, or First

ring:Off to mute the ﬁrst ring.

4. Press to save. You hear

a conﬁrmation tone.

NOTE

• If you have muted the ﬁrst ring, you

will hear one ring less before the

answering system and voicemail

answer the incoming calls.

Answering system

Diﬀerence between the built-in

answering system and voicemail

service

Your telephone has separate indicators

for two different types of voice

messages: those recorded on its built-

in digital answering system and those

recorded in your telephone service

provider’s voicemail (fees may apply).

Your telephone’s built-in digital

answering system messages and

voicemail messages are separate.

The main differences between them

are:

VTech CS5329 Manuel utilisateur

Marque: VTech

Modèle: CS5329

Catégorie: Téléphones

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: VTech CS5329 User manual

VTech CS5329 Manuel utilisateur

Ce manuel convient également à

VTech CS5329 Manuel utilisateur

dans d''autres langues

Documents connexes