1
Package Contents
RT-1016A 15.6” fanless touch terminal…..x1
Power adapter……………………………..x1
Power cord………………………………...x1
User manual……………………………….x1
Screw for back cover……………………...x1
Views of RT-1016A
Front View
RT-1016A
Fanless Touch POS Terminal
User Manual
P-Cap Touch Panel
LED indicator
Camera (Optional)
16950903010 Ver. A0
http://www.posiflex.com
2
SOME IMPORTANT NOTES
FCC NOTES
This system meets industry & government requirements and applicable
standards. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions
manual, may cause interference to radio communications. It has been tested
and found to comply with limits for a Class A digital device pursuant to
subpart B of Part 15 of FCC Rules, which are designed to provide reasonable
protection against interference when operated in a commercial environment.
Operation of this equipment in a residential area is likely to cause interference
in which case the user at his own expense will be required to take whatever
measures to correct the interference.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CE CLASS A WARNING
This equipment is compliant with Class A of CISPR 32. In a residential
environment this equipment may cause radio interference.
WARRANTY LIMITS
Warranty will terminate automatically when the machine is opened by any
person other than the authorized technicians. The user should consult his/her
dealer for the problem happening. Warranty voids if the user does not follow
the instructions in application of this merchandise. The manufacturer is by no
means responsible for any damage or hazard caused by improper application.
警告使用者
這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在這種情
況下，使用者會被要求採取某些適當的對策。
3
BATTERY CAUTION NOTES
Dispose of used batteries according to the instructions.
Replacement of a battery with an incorrect type that can defeat a
safeguard (for example, in the case of some lithium battery types)
Disposal of a battery into fire or a hot oven, or mechanically crushing
or cutting of a battery that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of flammable
liquid or gas.
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
BATTERIE ATTENTION NOTES
Jetez les piles usagées conformément aux instructions.
Remplacement d'une batterie avec un type incorrect qui peut annuler
une sauvegarde (par exemple, dans le cas de certains types de batterie
au lithium)
Mise au rebut d'une batterie dans le feu ou dans un four chaud, ou
écrasement ou coupure mécanique d'une batterie pouvant entraîner une
explosion.
Laisser une batterie dans un environnement environnant à des
températures extrêmement élevées pouvant entraîner une explosion ou
la fuite de liquide ou de gaz inflammable.
Une batterie soumise à une pression atmosphérique extrêmement basse
pouvant provoquer une explosion ou une fuite de liquide ou de gaz
inflammable.
警告
本電池如果更換不正確會有爆炸的危險，請依製造商說明書處理用過之
電池。
4
Rear View
Bottom View
Right-Side View
System Back Cover
Attachment Bay
Wall- Mount
Screw Hole
Release Lever for System Back Cover
Brightness Adjustment Button ＋
Power Button
Brightness Adjustment Button －
Screw Hole
5
Left-Side View
View of I/O Interface of RT-1016A
Bottom Side
Left Side
Connecting Power Adapter and Cables
The following provides instructions required to connect your cables.
1. To remove the back cover, hold down the
release levers at the bottom of the system
back cover and then pulling the cover
outwards.
DB9 COM Port
CR Port
LAN Port
DC IN Power Connector
RJ50 COM Port
USB 3.0 Port
Rubber Shield for USB2.0 Port
USB 2.0 Port
USB 2.0 Ports
Micro USB Port
HDMI Port
SD Card Slot
6
2. Connect the connector of the power adapter to
the DC-IN power jack. If necessary, properly
insert other cables into the correct ports.
3. Neatly arrange the cables along the cable slots.
4. Place back the sytem back cover. Make sure it
is well locked into place with a click sound.
5. Make sure the cable could be pulled out of the cable exit from the bottom
of the base.
6. Please insert another screw into the screw hole
indicated in the figure, and secure it.
7
CAUTION: On doing insertion or extraction of a cable
connector, please always hold the connector head itself
instead of pulling the cable wire. Doing this could damage the
cables and ports, which is considered as an artificial damage
and is not covered by the warranty. The means of power cord
should be connected to a socket-outlet with earthing
connection.
Installing Optional Upgrade Kits and Peripherals
RT-1016A is an expandable model which allows you to upgrade its own
capacity by additionally installing multiple peripheral devices, such as
magnetic stripe reader (MSR), fingerprint or iButton sensors, and 2
nd
POS
monitor, according to your preference. The following will give you brief
instructions on how to expand on your current POS system with these optional
upgrade kits. Before proceeding with the installation of peripherals, please
make sure the POS system is completely shut down to prevent damage.
Status LED Indicator
LED status indicator, which is located at the bottom edge of the LCD panel, is
mainly responsible for notifying users of the current system status by emitting
various LED signals. In the chart provided below, it describes all the possible
LED status as a quick reference.
LED Status
Description
Off
System power OFF
Orange
System standby
Blue
System power ON
Powering ON/OFF RT-1016A
Power ON RT-1016A
Press down the power button to power on the POS.
Power OFF RT-1016A
In most cases, press the power button of the POS to power
the system off. If the terminal fails to turn off the machine
for unknown reasons, please be advised to hold the power
button more than 10 seconds to force a shutdown of the
system.
Power
Button
8
Installing an Operating System
You are highly advised not to install an operating system on
RT-1016A without professional instructions. Improper installation could lead
to system malfunction or failure. Please contact with your dealers about the
issues of operating system installation.
Performing System Recovery
For RT-1016A model with preloaded operating systems, Recovery DVD
which includes useful utilities will be provided in the package to assist you in
efficiently restoring or repairing your damaged system. However, you are not
encouraged to recover your system without the help of system integrators.
Please be advised to contact your service center for further assistance with
system recovery.
Operation Environment
To prevent RT-1016A from overheating, it is suggested to position your
terminal in a well-ventilated working environment. In doing so, please be
advised to keep the POS terminal at least 25mm away from other devices to
ensure the machine is properly cooled down and functioning normally.
Specifications
RT-1016A
CPU
Rockchip RK3399
System Memory
2GB / 4GB onboard
Storage Device
16GB / 32GB /64GB eMMC onboard + micro SD
slot
OS
Android 9.0
Power Supply
1 x 12V DC-in jack, 4-pin (12V/40W)
LCD Panel
15.6" TFT LCD with LED backlight
LCD Resolution
1920 x 1080
Touch
P-CAP touch with multi-touch support
Serial Port
2 ports, DB9 x 1+ RJ-50 x 1
External USB
Port
5 ports, USB3.0 x 1+ USB2.0 x 4
Internal USB
Port
3 x USB2.0 (pin header)
OTG USB
1 x micro USB
LAN Port
1 x 10/100/1000 Mb
Display Port
1 x VGA (internal connector) 1 x HDMI
(for 2
nd
display, VGA connector and HDMI port
can’t be used at the same time)
CR Port
1 port, controlling 2 CR, 24V power support only
9
Audio Port
1 x 2W speaker
Extension Slot
1 x mini-PCIe slot
Wireless
Connectivity
Wifi via mini-PCIe expansion slot or USB
Power Button
1 x power button
Reset Button
1 x reset button
Dimension
(W x V x D in mm)
402 x 251 x 41.2
Environmental
Requirements
Operating：0°C 〜 40°C, 20%RH - 90%RH
Storage：-20°C 〜 70°C, 10%RH - 90%RH
Regulation Rules
FCC/CE
Attachment
RA-101
Slim MSR attachment for RT series
RA-103
iButton (or RFID) with one USB port attachment
for RT series
RA-104
2D scanner attachment for RT series
RA-301
3-in-1 MSR + Fingerprint Sensor + 2D scanner
attachment for RT series
LM/TM-4010DP
9.7" 2nd display for RT series terminal
LM/TM-4011DP
10.1" 2nd display for RT series terminal
※ The product information and specifications are subject to change
without prior notice. To get the detailed information on the RT-1016A,
please check this model from Posiflex Global Website.
10
<MEMO>
11
<MEMO>
12
<MEMO>
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
dans d''autres langues
- English: Posiflex RT-1016A User manual
Documents connexes
-
Posiflex RT-1016A Manuel utilisateur
-
-
-
Posiflex RT-5015E Manuel utilisateur
-
-
-
-
Posiflex RT-5115 Manuel utilisateur
-
Posiflex RT-6115 Manuel utilisateur
-