Extron TLE 350 Manuel utilisateur

Marque: Extron

Modèle: TLE 350

Taper: Manuel utilisateur

Ce manuel convient également à

68-1692-01 Rev. B

01 19

TLP 350CV and TLE 350

User Guide

TouchLink

TouchLink 3.5" Cable Cubby Touchpanel

and matching Cable Cubby Enclosure

Safety Instructions • English

WARNING: This symbol, , when used on the product, is intended to

alert the user of the presence of uninsulated dangerous voltage within the

product’s enclosure that may present a risk of electric shock.

ATTENTION: This symbol, , when used on the product, is intended

to alert the user of important operating and maintenance (servicing)

instructions in the literature provided with the equipment.

For information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics, see the Extron Safety and

Regulatory Compliance Guide, part number 68-290-01, on the Extron

website, www.extron.com.

Sicherheitsanweisungen • Deutsch

WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer darauf

aufmerksam machen, dass im Inneren des Gehäuses dieses Produktes

gefährliche Spannungen herrschen, die nicht isoliert sind und die einen

elektrischen Schlag verursachen können.

VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in

der im Lieferumfang enthaltenen Dokumentation besonders wichtige

Hinweise zur Bedienung und Wartung (Instandhaltung) geben.

Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,

EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie

in den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer

68-290-01) auf der Extron-Website, www.extron.com.

Instrucciones de seguridad • Español

ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,

avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del

producto, lo que puede representar un riesgo de descarga eléctrica.

ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa

al usuario de la presencia de importantes instrucciones de uso y

mantenimiento recogidas en la documentación proporcionada con el

equipo.

Para obtener información sobre directrices de seguridad, cumplimiento

de normativas, compatibilidad electromagnética, accesibilidad y

temas relacionados, consulte la Guía de cumplimiento de normativas

y seguridad de Extron, referencia 68-290-01, en el sitio Web de Extron,

www.extron.com.

Instructions de sécurité • Français

AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le

produit, signale à l’utilisateur la présence à l’intérieur du boîtier du

produit d’une tension électrique dangereuse susceptible de provoquer

un choc électrique.

ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,

signale à l’utilisateur des instructions d’utilisation ou de maintenance

importantes qui se trouvent dans la documentation fournie avec le

matériel.

Pour en savoir plus sur les règles de sécurité, la conformité à la

réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets

connexes, lisez les informations de sécurité et de conformité Extron, réf.

68-290-01, sur le site Extron, www.extron.com.

Istruzioni di sicurezza • Italiano

AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad

avvertire l’utente della presenza di tensione non isolata pericolosa

all’interno del contenitore del prodotto che può costituire un rischio di

scosse elettriche.

ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad avvertire

l’utente della presenza di importanti istruzioni di funzionamento e

manutenzione nella documentazione fornita con l’apparecchio.

Per informazioni su parametri di sicurezza, conformità alle normative,

compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento

alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo

68-290-01, sul sito web di Extron, www.extron.com.

Instrukcje bezpieczeństwa • Polska

OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma na celu

poinformować użytkownika o obecności izolowanego i niebezpiecznego

napięcia wewnątrz obudowy produktu, który może stanowić zagrożenie

porażenia prądem elektrycznym.

UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do

ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji

(obsługi) w literaturze, wyposażone w sprzęt.

Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji

wzajemnej zgodności, zgodność EMI/EMF, dostępności i Tematy

pokrewne, zobacz Extron bezpieczeństwa i regulacyjnego zgodności

przewodnik, część numer 68-290-01, na stronie internetowej Extron, www.

extron.com.

Инструкция по технике безопасности • Русский

ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан

на продукте, предупреждает пользователя о наличии

неизолированного опасного напряжения внутри корпуса

продукта, которое может привести к поражению

электрическим током.

ВНИМАНИЕ: Данный символ, , если указан на продукте,

предупреждает пользователя о наличии важных инструкций

по эксплуатации и обслуживанию в руководстве,

прилагаемом к данному оборудованию.

Для получения информации о правилах техники безопасности,

соблюдении нормативных требований, электромагнитной

совместимости (ЭМП/ЭДС), возможности доступа и других

вопросах см. руководство по безопасности и соблюдению

нормативных требований Extron на сайте Extron: ,

www.extron.com, номер по каталогу - 68-290-01.

安全说明 • 简体中文

警告：产品上的这个标志意在警告用户该产品机壳内有暴露的危险电压，

有触电危险。

注意：产品上的这个标志意在提示用户设备随附的用户手册中有

重要的操作和维护(维修）说明。

关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍

使用的特性等相关内容，敬请访问 Extron 网站 , www.extron.com，参见

Extron 安全规范指南，产品编号 68-290-01。

Safety Instructions

安全記事 • 繁體中文

警告: 若產品上使用此符號，是為了提醒使用者，產品機殼內存在著

可能會導致觸電之風險的未絕緣危險電壓。

注意若產品上使用此符號，是為了提醒使用者，設備隨附的用戶手冊中有

重要的操作和維護（維修）説明。

有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關主題的詳細

資訊，請瀏覽 Extron 網站：www.extron.com，然後參閱《Extron 安全性與

法規遵守手冊》，準則編號 68-290-01。

安全上のご注意 • 日本語

警告: この記号が製品上に表示されている場合は、筐体内に絶縁されて

いない高電圧が流れ、感電の危険があることを示しています。

注意:この記号が製品上に表示されている場合は、本機の取扱説明書に

記載されている重要な操作と保守(整備)の指示についてユーザーの注意

を喚起するものです。

安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目に

ついては、エクストロンのウェブサイト www.extron.com より『 Extron Safety

and Regulatory Compliance Guide』 ( P/N 68-290-01) をご覧ください。

안전 지침 • 한국어

경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는

접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을

경고합니다.

주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와

있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.

안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에 대한

자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및 규제 준수

안내서, 68-290-01 조항을 참조하십시오.

Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.

The following registered trademarks®, registered service marks(SM), and trademarks(TM) are the property of RGBSystems, Inc. or

Extron Electronics (see the current list of trademarks on the Terms of Use page at www.extron.com):

Registered Trademarks

(

)

Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Extron, Flat Field, FlexOS, Glitch Free, Global Configurator,

Global Scripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, Key Minder, LinkLicense, LockIt, MediaLink, MediaPort,

NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, Show Me, SoundField, SpeedMount, SpeedSwitch, StudioStation,

SystemINTEGRATOR, TeamWork, TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP, XTP Systems, and ZipClip

Registered Service Mark

(SM)

: S3 Service Support Solutions

Trademarks

(

™

)

AAP, AFL (Accu-Rate Frame Lock), ADSP (Advanced Digital Sync Processing), Auto-Image, AVEdge, CableCover, CDRS (Class D

Ripple Suppression), Codec Connect, DDSP (Digital Display Sync Processing), DMI (Dynamic Motion Interpolation), DriverConfigurator,

DSPConfigurator, DSVP (Digital Sync Validation Processing), eLink, EQIP, Everlast, FastBite, FOX, FOXBOX, IP Intercom HelpDesk, MAAP,

MicroDigital, Opti-Torque, PendantConnect, ProDSP, QS-FPC (QuickSwitch Front Panel Controller), Room Agent, Scope-Trigger, ShareLink, SIS,

Simple Instruction Set, Skew-Free, SpeedNav, Triple-Action Switching, True4K, Vector™ 4K, WebShare, XTRA, and ZipCaddy

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause interference.

This interference must be corrected at the expense of the user.

NOTE:

• This unit was tested with shielded I/O cables on the peripheral devices. Shielded

cables must be used to ensure compliance with FCC emissions limits.

• For more information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics, see the Extron Safety and

Regulatory Compliance Guide on the Extron website.

Battery Notice

This product contains a battery. Do not open the unit to replace the battery. If the

battery needs replacing, return the entire unit to Extron (for the correct address, see the Extron

Warranty section on the last page of this guide).

CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used

Batteries According to the Instructions.

ATTENTION : Risque d’explosion. Ne pas remplacer la pile par le mauvais type de pile.

Débarrassez-vous des piles utilisées selon le mode d’emploi.

Conventions Used in this Guide

Notiﬁcations

In this user guide, the following are used:

WARNING: Potential risk of severe injury or death.

AVERTISSEMENT : Risque potentiel de blessure grave ou de mort.

CAUTION: Risk of minor personal injury.

ATTENTION : Risque de blessuremineure.

ATTENTION:

• Risk of property damage.

• Risque de dommages matériels.

NOTE: A note draws attention to important information.

Software Commands

Commands are written in the fonts shown here:

^AR Merge Scene,,Op1 scene 1,1 ^B 51 ^W^C

[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]

X1&

X2)

X2#

X2!

}

NOTE: For commands and examples of computer or device responses mentioned

in this guide, the character “0” is used for the number zero and “O” represents the

capital letter “o”.

Computer responses and directory paths that do not have variables are written in the font shown

here:

Reply from 208.132.180.48: bytes=32 times=2ms TTL=32

C:\Program Files\Extron

Variables are written in slanted form as shown here:

ping xxx.xxx.xxx.xxx —t

SOH R Data STX Command ETB ETX

Selectable items, such as menu names, menu options, buttons, tabs, and field names are written

in the font shown here:

From the File menu, select New.

Click the OK button.

Specifications Availability

Product specifications are available on the Extron website, www.extron.com.

Extron Glossary of Terms

A glossary of terms is available at www.extron.com/technology/glossary.aspx.

Contents

Introduction............................................................ 1

About this Guide .....................................................1

About the TLP 350CV .............................................1

About the TLE 350 .................................................. 2

Features .................................................................. 2

TLP 350CV .........................................................2

TLE 350 .............................................................. 2

Requirements for the TLP 350CV ............................ 3

Software .............................................................3

Hardware ............................................................3

Application Diagram ................................................3

Installation Overview ........................................... 4

Mounting ................................................................. 6

Planning .................................................................. 6

Tools Required for Installation .................................. 7

Included Parts ......................................................... 7

Ensure Adequate Under-table Clearance for

Retractors .............................................................. 8

Cutting the Table .....................................................8

Cut-out Dimensions ............................................8

Cutting the Surface .............................................8

Running Cables ....................................................10

Installing Cable Retractors (Optional) .....................10

Installing Power Modules (Optional) ....................... 11

Preparing and Installing the AAP Assemblies ......... 12

Installing AAPs ..................................................12

Inserting the AAP Assemblies ............................13

Mounting the Enclosure.........................................14

Bottom Panel Features (TLP 350CV only) .............. 15

Power on the TLP 350CV .................................16

Front Panel Features ......................................... 17

Front Panel Features .............................................17

On-screen Menus ............................................... 19

Setup Menu ..........................................................19

Main..................................................................19

Volume ..............................................................20

Time .................................................................21

IP ...................................................................... 21

Video ................................................................23

Calibration Screen ................................................. 24

Conﬁguration Software ..................................... 25

Conﬁguration and Control Software ......................25

Installing Software .................................................26

GUI Conﬁgurator and Global Conﬁgurator

Installation ........................................................26

Using the TouchLink Panel Web Pages .................27

GUI Design and Conﬁguration ...............................29

Using GUI Conﬁgurator .....................................29

Using Global Conﬁgurator .................................33

Reference Material ............................................. 38

Reset Modes.........................................................38

Use Factory Firmware .......................................38

Run or Stop Events ........................................... 39

Reset All IP Settings .......................................... 39

Reset to Factory Defaults ..................................39

Updating Firmware ................................................ 40

Obtaining the Latest Firmware File ....................40

Updating Firmware Using Firmware Loader ....... 42

Updating Firmware Using GUI Conﬁgurator ....... 43

Updating Firmware Using the Touchpanel

Web Pages ......................................................43

Button Kits and Replacement ................................44

Button Kits ........................................................ 44

Button Replacement .........................................44

TLP 350CV and TLE 350 • Contents vii

TLP 350CV and TLE 350 • Contents viii

Introduction

The touchpanels are ideal for any AV applications requiring medium or large touchpanels with

flexible mounting options and fully customizable interfaces.

This section provides an overview of these products:

• About this Guide

• About the TLP 350CV

• About the TLE 350

• Features

• Requirements for the TLP 350CV

• Application Diagram

About this Guide

This guide describes the function, installation of both the Extron TLP350CV Cable Cubby

TouchLink touchpanel and the matching Extron TLE 350 Cable Cubby enclosure and operation

of the TLP350CV.

Unless otherwise stated, the terms “touchpanel,” “TLP,” or “TLP350CV” refer to the TLP 350CV.

The terms “TLE” or “TLE350” refer to the TLE350. The term “enclosure” refers to either product.

NOTES:

• The ﬁrst part of this guide (pages 1-14) describes the procedure for installing the

cable cubby enclosure and refers to both the TLP 350CV and the TLE 350.

• The second part of the guide (from page 15 onwards) describes the touchpanel and

refers only to the TLP 350CV.

About the TLP 350CV

The Extron TLP 350CV TouchLink 3.5 inch Cable Cubby Touchpanel combines AV system

control with cable management. It features a tilt-up, full-color touchscreen in an elegant, metal

enclosure that can be mounted securely into a tabletop, lectern or other flat surface.

In addition, ten customizable backlit buttons provide expanded control capabilities to ensure that

critical functions are easily accessible. The TLP 350CV touchpanel enables integrators to deploy

a fully configurable furniture-mounted touchscreen control with cable management and easy

access to AV connectivity and power.

Global Configurator and GUI Configurator software, along with ready-to-use templates, make

system setup fast and easy, with no programming required. An integrated Ethernet port provides

communication with IP Link-enabled control processors for controlling and monitoring AV

equipment such as projectors, displays, switchers, and source devices over a standard Ethernet

network.

AV connectivity and cable management is provided by convenient pullout cables such as VGA,

3.5 mm audio, AV, network, HDMI, DVI and Display port cables. Passive AAP plates and a dual

AC outlet are also available. Using the video input, the panel can monitor video source devices

whether as a preview aid or a personal viewer for the operator.

TLP 350CV and TLE 350 • Introduction 1

About the TLE 350

The Extron TLE 350 Cable Cubby is a furniture-mountable enclosure that provides easy access

to AV, data, and power connections. It has a low-profile design with flip-up lid and nine single-

space AAP openings that can be populated with Extron AAPs and Retractors. The dimensions

are identical to the TLP 350CV, making it an ideal, complementary solution for these touchpanels.

Features

TLP 350CV

• 3.5 inch flip-up color touchscreen — with 320x240 resolution and 18-bit color depth.

• Ten customizable backlit buttons — can be assigned functions with Extron Global

Conﬁgurator.

NOTE: Use GUIConfigurator (version 1.3 or later) and Global Configurator (version 3.3

or later) to configure the TLP 350CV touchpanel. Do not use GUI Designer or Global

Configurator Plus and Professional.

• Full-motion video display — for preview and monitoring

• Compatible with all IP Link controllers

NOTE: The TLP 350CV is not compatible with IPLink Pro or IPCP Pro controllers.

• Built-in speaker — provides audio for video preview and audible feedback from button

presses.

• Light sensor — adjusts screen brightness as the ambient room lighting changes.

• AV connectivity options:

• Holds up to 9 single-space AAP-Architectural Adapter Plates

• Holds up to 6 Retractor Cable Retraction Systems

• Cable Cubby design — offers easy access to AV, data, and power connections.

• AC power modules available for US, Europe, and other major world markets.

• Convenient LED lighting — illuminates power and AV Cable Cubby area.

• Integrated lid switch — automatically wakes the touchpanel when opened and can trigger

any other system function.

• Fully configurable — using Extron GUI Conﬁgurator and Global Conﬁgurator.

• Supports the Extron Control App.

TLE 350

• Dimensions are identical to the TLP 350CV — makes it an ideal, complementary

solution for this touchpanel.

• Furniture-mountable enclosure — provides easy access to AV, data, and power

connections.

• Low profile design — with ﬂip-up lid.

• Nine single-space AAP openings — can be populated with Extron AAPs and Retractors.

• AC power modules available for US, Europe, and other major world markets.

TLP 350CV and TLE 350 • Introduction 2

Requirements for the TLP 350CV

Software

NOTE: You must use GUIConfigurator (version 1.3 or later) and Global Configurator (version

3.3 or later) to configure the TLP 350CV. Do not use GUI Designer or Global Configurator

Plus and Professional.

For a complete list of the requirements to run GUI Configurator or Global Configurator 3, see

product page at www.extron.com for the appropriate software.

Hardware

An Extron IP Link controller must also be connected to the same network domain as the

TouchLink panel. See the TLP 350CV product page at www.extron.com for suitable products.

NOTE: The TLP 350CV is not compatible with Extron IP Link Pro controllers.

Application Diagram

Extron

TLP 350CV

3.5" TouchLink

Touchpanel

Cable Cubby

UNSWITCHED

100-240V/ 5A MAX

UNSWITCHED

100-240V/ 5A MAX

LAPTOP

DVD

DOC CAM

AUXILIARY

DISPLAY ON

DISPLAY OFF

MUTE

VOLUME

Extron

DVD

Video

<< More

UNSWITCHED

100-240V/ 5A MAX

UNSWITCHED

100-240V/ 5A MAX

Extron

TLE 350

3.5" TouchLink

Enclosure

Extron

TLP 350CV

3.5" Cable Cubby

TouchLink

Touchpanel

Figure 1. Application Diagram

TLP 350CV and TLE 350 • Introduction 3

Installation

Overview

Follow all these steps to mount and install the TLP 350CV. Follow steps 3 and 4 to mount the

TLE 350:

1. Before starting, download and install the latest versions of the following software:

 GUI Configurator — for designing layouts for Extron TouchLink touchpanels.

 Global Configurator — for setting up and conﬁguring the control processor and

touchpanel.

See Configuration Software on page 25.

2. Obtain the following network information from your network administrator:

 DHCP status (On or Off). If DHCP is off, you also require

 IP address

 Subnet mask

 Gateway

 User name — this can be either admin or user.

 Password — by default this is extron (for either admin or user).

 MAC address — make a note of the touchpanel MAC address.

3. Prepare to mount the CableCubby:

 Make sure you are familiar with all the Included Parts (see page 7) and have all the

Tools Required for Installation (see page 7) for installing the cable cubby.

 Plan where you are going to install the Cable Cubby and how you are going to cut the

hole.

 Ensure the TLP 350CV is oriented correctly and that there is adequate room for cables

and cable retractors (optional).

 Ensure you are using the correct cut-out template or dimensions (see Cut-out

Dimensions on page 8).

 Ensure the installation complies with all necessary regulations.

4. Mount the Cable Cubby:

 Cut the table surface (see Cutting the Table on page 8).

 Run all cables to the unit (see Running Cables on page 10).

 Install cable retractors (see Installing Cable Retractors (Optional) on page 10).

 Install the power module (see Installing Power Modules (Optional) on page 11).

 Put together and install the AAP assembly (see Preparing and Installing the AAP

Assemblies on page 12).

 Mount the Cable Cubby (see Mounting the Enclosure on page14).

TLP 350CV and TLE 350 • Installation Overview 4

5. Connect cables to the touchpanel. The unit is powered by a 12 VDC power supply.

 Connect the power supply (see 12 VDC External Power Supply on page 15).

ATTENTION:

• Do not power on the touchpanels or control processors until you have read the

Attention notice on page 15.

• Ne branchez pas les écrans tactiles ou les contrôleurs avant d’avoir lu les mises

en garde page15.

6. Set up the TLP 350CV for Network Communication:

 Connect the PC that you are using for the setup, the control processor, and the

touchpanel to the same Ethernet subnetwork.

 Use the Setup Menu (see page 19) or Global Configurator to set the DHCP status

and, if necessary, the IP address, subnet mask, gateway, and related settings for the

touchpanel.

 Configure the TLP 350CV — the GUI Configurator Help File and the Global Configurator

Help File provide step-by-step instructions and detailed information.

 The Global Configurator Help File also includes an introduction to that software and

sections on how to start a project and configuration.

TLP 350CV and TLE 350 • Installation Overview 5

Mounting

This section describes how to mount the TLP 350CV Cable Cubby enclosure. The TLE 350 is

installed in exactly the same way. The section covers covers:

• Planning

• Tools Required for Installation

• Included Parts

• Ensure Adequate Under-table Clearance for Retractors

• Cutting the Table

• Running Cables

• Installing Cable Retractors (Optional)

• Installing Power Modules (Optional)

• Preparing and Installing the AAP Assemblies

• Mounting the Enclosure

• Bottom Panel Features (TLP 350CV only)

Planning

1. Before making any cuts, select the best location for the enclosure.

 Ensure that the edge that opens on the lid is oriented correctly.

 Ensure there is enough space for all the system cables and components, above and

below the table. Take account of:

• Clearances for under-table cabling, especially if the cable has a large bend radius.

• Ensure Adequate Under-table Clearance for Retractors if they are to be

installed (see page 8).

• The number and type of AAPs required for the installation.

• The location of devices that connect to the AAPs either above or below the table.

2. Verify that you have the correct template or Cut-out Dimensions (see page 8).

3. Decide on the method for cutting a hole in the table (see Cutting the Table on page 8).

There are three methods available:

• Router with routing template — requires a router template, which must be

purchased separately.

• CNC router — must be programmed with the correct dimensions.

• Reciprocating saw or jigsaw — requires a paper template (available at

www.extron.com).

The hand router used with the routing template or the CNC wood router are the most

accurate methods for cutting the hole. Either one of these methods is recommended by

Extron. The jigsaw is less accurate, but is also acceptable.

4. Check all relevant regulations.

 Ensure that the installation complies with local, state, and national building and electrical

codes.

 Ensure that the installation complies with the Americans with Disabilities Act or other

accessibility requirements.

TLP 350CV and TLE 350 • Mounting 6

Tools Required for Installation

Safety Glasses

Phillips Screw Driver

Tape Measure

1/4" Hex Nut Driver

Marking Pen

Square

Vacuum Cleaner

Figure 2. Tools Required for Installaton

Included Parts

Open the shipping container and verify that all the following components are present:

Table Clamps

Zip Ties

#4−40 Screws

and Nuts

TLP 350CV or TLE 350

AC Power Module*

Blank AAPs

Pass-thru AAPs

2 Pos

AAP Shelf Bracket Kits

(2 brackets/kit)

3 Pos1 Pos

1A MAX

100-240V 50-60Hz

12 VDC, 1.5 A

Power Supply

* The unit may be provided without a power module or with a different power module (see the

table below).

With Power

Module

Without Power

Module

AC Power Module

1 0

Pass-through AAPs†

4 4

Blank AAPs

3 5

1-position Bracket Kit

0 0

2-position Bracket Kit

2 3

3-position Bracket Kit

1 1

NOTES:

* Inside the US, the TLP 350CV may be purchased with or without an AC power module. If a

power module is required for the TLE 350, it must be purchased separately.

Outside the US, see www.extron.com to purchase an AC power module that is suitable for

your location.

† Active or Passive AAPs must be purchased separately (see www.extron.com).

Figure 3. Parts Included with the TLP 350CV and TLE 350

TLP 350CV and TLE 350 • Mounting 7

Ensure Adequate Under-table Clearance for Retractors

Retractors are optional accessories for handling cables with the TLP 350CV. If you are using

retractors, ensure that there is sufficient room beneath the table to accommodate them.

Horizontal mounting provides maximum legroom and protects the retractors from accidental

damage. Vertical mounting is used if space or access makes horizontal mounting difficult. To

satisfy ADA compliance requirements, there is also an option to mount the retractors at a 30°

angle (see the Retractors User Guide, which is available at www.extron.com).

Horizontal Mounting Clearance

XL Models

Vertical Mounting Clearance

XL Models

3.0"

(7.6 cm)

2.7" (6.9 cm)

17.0"

(43.3 cm)

23.0" (58.5 cm)

24.1"

(61.2 cm)

30.1"

(76.5 cm)

2.7" (6.9 cm)

9.8"

(24.9 cm)

3.0"

(7.6 cm)

9.8"

(24.9 cm)

Figure 4. Under-table Clearance Requirements for Retractors

Cutting the Table

Cut-out Dimensions

There are three alternative methods of making the hole for the TLP 350CV (see Cutting the

Surface below):

• If using a Router with routing template, you should purchase the TLP 350CV routing

template.

• If using a CNC router, use the exact cut-out dimensions.

• If using a Reciprocating saw or jigsaw use the paper cut-out template.

Cutting the Surface

WARNING: Wear safety glasses when operating power equipment. Failure to comply can

result in eye injury.

AVERTISSEMENT : Portez des lunettes de sécurité lorsque vous utilisez l’équipement

électrique. Ne pas respecter cela peut conduire à une blessure à l’oeil.

TLP 350CV and TLE 350 • Mounting 8

ATTENTION:

• The opening in the table for the Cable Cubby should be cut only by licensed and

bonded craftspeople. Exercise care to prevent scarring or damaging the furniture.

• L’ouverture dans la table pour le CableCubby devrait être coupée seulement par

des artisans autorisés et qualiﬁés. Faites attention à ne pas faire de marques sur le

meuble et à ne pas l’endommager.

• Use the appropriate metal Extron routing template or refer to the surface cutout

dimensions before cutting a hole in the furniture or other surface. Pay special

attention to the direction the unit will face. The connector access side is underlined

(see CNC Router below). Extron is not responsible for miscut mounting holes.

• Utilisez le gabarit de détourage métallique approprié ou reportez-vous aux

dimensions de découpe de la surface indiquées ci-après avant de découper

le meuble ou la surface. Faites particulièrement attention à la directions dans

laquelle l’unité sera dirigée. Le côté pour accéder au connecteurs est souligné (voir

CNCRouter ci-dessous). Extron ne sera pas responsable des erreurs de coupe.

• The surfaces of the Cable Cubby enclosure have screws and other protrusions that

could damage ﬁne furniture. Do not rest the enclosure on unprotected furniture.

• La surface du boîtier Cable Cubby a des vis et d’autres éléments en saillie qui

pourrait endommager des meubles ﬁns. N’appuyez pas le boîtier sur du moblier

non protégé.

• Ensure the table surface is at least 0.375 inches (0.95 cm) thick.

• Assurez vous que la surface de la table est au moins 0,95 cm (0,375”) d’épaisseur.

Be certain the cut is laid out in exactly the desired location and the edge that opens on the lid

is correctly oriented. After verifying and checking dimensions, cut a hole in the surface of the

furniture where the enclosure is being installed.

Router with routing template

If using a routing template, make sure it is

the correct template for the TLP350CV (see

www.extron.com). For complete instructions,

see the RoutingTemplateUserGuide,

available at www.extron.com.

NOTE: The metal router guide must be

purchased separately. It is reusable

and should not be discarded when the

installation is complete.

CNC router

If using a CNC router, enter the correct dimensions for the TLP350CV:

7.50 +0.00/-0.02 inches W x 6.00 +0.00/-0.02 inches D

19.05 +0.00/-0.05 cm W x 15.24 +0.00/-0.05 cm D

NOTE: The width dimension (underlined)

refers to the side with AAP access.

Reciprocating saw or jigsaw

If using a reciprocating saw or jigsaw, make sure to

use the paper cutout template for the TLP350CV.

The template is available at www.extron.com.

HSA 200

USER ACCESS

HSA 200

CABLE CUBBY 300

USER ACCESS

Cut-Out Template for the Extron

TLP 710CV

Outer Edge of Trim Ring

(Do not cut this line.)

1. Confirm the product to be installed.

2. Remove the surface cut-out area

(gray) from the template.

3. Mark the position on the wall or

furniture where the TLP 710MV

is being installed.

4. Cut the opening.

P/N 68-2046-01 Rev. B

Page size: 11" x 17"

Print scale 1:1

Do not shrink.

P/N

TLP 350CV and TLE 350 • Mounting 9

Running Cables

Run all cables necessary to support the AC connector, the cables stored in the cubby, and all

planned AAP connectors. Run the cables below the table and through the hole that was cut in

the previous step (Cutting the Surface). Leave enough slack in the cables to connect or route

them before the cubby is installed in the table. Leave enough slack for the external power supply

and to connect AV cables and the cable for PoE and LAN to the TLP350CV.

Installing Cable Retractors (Optional)

Extron cable retractors retract and store extended cables in Cable Cubby systems, preventing

them from tangling underneath the table. Retractor kits are available for several cable types. Up

to six retractors can be installed in the TLP350CV enclosure (three at either end). They are not

provided with the TLP350CV and must be purchased separately.

The buttons on the retractors must be placed at one end of the unit and must, therefore, be the

first or the last items added.

Secur

e the bolt

with the nut.

Secure the locking screw

on each retractor.

Do not overtighten.

Insert the bolt thr

ough the

etractor mounting hole on

the side of the Cable Cubby

and r

etractor assembly.

Insert retractors into the

touchpanel enclosure

from underneath.

Figure 5. Installing Cable Retractors

To mount the retractors horizontally and for further information and installation instructions,

see the Retractors User Guide, which is available at www.extron.com. The guide also

provides information about mounting the retractors at a 30° angle to satisfy ADA compliance

requirements.

TLP 350CV and TLE 350 • Mounting 10

Installing Power Modules (Optional)

WARNING:

AVERTISSEMENT :

• Switch off all electrical power before connecting the AC conduit to a junction box, and

keep power off until installation is complete.

• Débranchez toutes les sources d’alimentation électrique avant de connecter le

conduit d’alimentation à un boîtier d’encastrement, et gardez l’alimentation éteinte

jusqu’à ce que l’installation soit complète.

• If the power cable is installed next to the retractors, ensure the power cable cannot

get tangled in the cable retractor mechanism.

• Si le câble d’alimentation est installé à côté des rétracteurs, assurez vous qu’il ne

puisse pas s’emmêler dans le mécanisme du rétracteur de câbles.

ATTENTION:

• All electrical installation must be performed by qualiﬁed personnel in accordance with

local and national building codes and electrical codes.

• Toute installation électrique, doit être effectuée par un personnel qualiﬁé,

conformément aux codes du bâtiment, aux codes incendie et sécurité, et aux codes

électriques, locaux et nationaux.

NOTE: Different countries require different power adapters. See www.extron.com to select

a power module that is suitable for your location.

The power module takes up two or three AAP spaces and may be installed before or after the

AAP assembly is installed or, if desired, with AAPs on either side.

Secure the po

wer module

to the

TLP 350CV frame

with #4-40 Phillips head

scre

ws and star washers.

Figure 6. Installing a Power Module in the TLP 350CV

1. Secure the power module with at least two #4-40 Phillips head screws and star washers.

CAUTION: Risk of electric shock: To ensure proper electrical grounding, use the

provided grounding screws and star washers.

ATTENTION : Risque de choc électrique: Afin d’assurer une mise à la terre correcte,

utilisez les fixations de mise à la terre et les rondelles en étoile fournies.

2. Run the cable or conduit to a convenient junction box. Extron recommends the circuit be

attached to a junction box that is directly wired to the main circuit.

TLP 350CV and TLE 350 • Mounting 11

Preparing and Installing the AAP Assemblies

The AAP assembly organizes the AAPs onto a frame that can easily be inserted or removed from

the TLP350CV enclosure. Pass-through and blank AAP plates are provided with the TLP350CV.

Active or passive AAPs must be purchased separately. For the complete range of available AAPs,

see www.extron.com.

If neither power modules nor cable retractors are installed, up to 9 AAPs can be accommodated.

Cable retractors, if installed, occupy the space of two AAP slots. The power modules occupy the

space of two (US) or three (European or Universal) AAP slots.

AAP brackets are available in one-space, two-space, and three-space configurations. Decide the

location of each AAP prior to assembly. Pass-through AAPs provide direct cable connection and

the cable must be installed as they are being mounted on the brackets.

TIP: The recommended way to install the cables and AAPs is to populate the brackets

with AAP plates outside the enclosure as shown in Installing AAPs below, then install

the populated AAP assemblies into the enclosure, as shown in Inserting the AAP

Assemblies on the following page.

NOTE: An extra column of AAP bracket mounting points is available

for use with TLP single-space AAP mounting brackets (see the

illustration to the right). Single-space brackets do not fit in any other

location.

Rear Bracke

Front Brackets

Figure 7. Preparing the AAP Assembly

Installing AAPs

1. Determine how many AAPs are being used and how many front and rear brackets are

needed. The brackets come in one-space, two-space, and three-space conﬁgurations. The

rear brackets are taller than the front brackets.

2. Place the AAP onto the bracket. Ensure one end of the AAP is secured to a front bracket

and the other end is secured to a rear bracket. Whenever possible match the width of the

front and rear brackets.

NOTES:

• Active, passive and pass-through AAPs can be mixed.

• Cables can be attached to the active or passive AAPs after assembly.

• Insert cables into each pass-through AAP before the next AAP is added.

The extra column of

mounting points is fo

installing single-space

AAP brackets.

TLP 350CV and TLE 350 • Mounting 12

La page charge ...

Extron TLE 350 Manuel utilisateur

Marque: Extron

Modèle: TLE 350

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Extron TLE 350 User manual

Extron TLE 350 Manuel utilisateur

Ce manuel convient également à

Extron TLE 350 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents