Sony HT-MT300/B Manuel utilisateur

Catégorie
Équipement musical supplémentaire
Taper
Manuel utilisateur

Ce manuel convient également à

H:\186-PC115\ML\chizi\877537S-00 US-CaFR-LaES\GB
data\4688010111\4688010211HTMT300UC2\010COV.fm
masterpage:
Right
HT-MT300
4-688-010-11(1)
Sound Bar
HT-MT300
Operating Instructions
US
Manuel d’instructions
FR
Manual de instrucciones
ES
H:\0186-PC115\ML\4688010141_HT-MT300_US-CaFR-
LaES\01_US\110BCO.fm
masterpage: Left
©2017 Sony Corporation Printed in Malaysia 4-688-010-14(1)
http://www.sony.net/
HT-MT300
4-688-010-14(1)
2
US
Owner’s Record
The model and serial numbers are
located on the bottom of the Bar
Speaker. Record the serial numbers in
the space provided below. Refer to
them whenever you call upon your Sony
dealer regarding this product.
Model No. HT-MT300
Serial No.
To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
The unit is not disconnected from the
mains as long as it is connected to the
AC outlet, even if the unit itself has been
turned off.
To reduce the risk of fire, do not cover
the ventilation opening of the appliance
with newspapers, tablecloths, curtains,
etc.
Do not expose the appliance to naked
flame sources (for example, lighted
candles).
To reduce the risk of fire or electric
shock, do not expose this appliance to
dripping or splashing, and do not place
objects filled with liquids, such as vases,
on the appliance.
As the main plug is used to disconnect
the unit from the mains, connect the
unit to an easily accessible AC outlet.
Should you notice an abnormality in the
unit, disconnect the main plug from the
AC outlet immediately.
As the main plug of AC power adapter is
used to disconnect the AC power
adapter from the mains, connect it to an
easily accessible AC outlet. Should you
notice an abnormality in it, disconnect it
from the AC outlet immediately.
Do not install the appliance in a
confined space, such as a bookcase or
built-in cabinet.
Do not expose batteries or appliances
with battery-installed to excessive
heat, such as sunshine and fire.
Indoor use only.
For the Bar Speaker
The nameplate and date of
manufacture are located on the bottom
of the Bar Speaker.
For the AC adapter
Labels for AC adapter Model No. and
Serial No. are located at the bottom of
AC adapter.
For the customers in the U.S.A.
This symbol is intended to alert
the user to the presence of
uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
This symbol is intended to alert
the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
WARNING
3
US
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near
water.
6) Clean only with dry cloth.
7) Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
8) Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of
the polarized or grounding-type
plug. A polarized plug has two
blades with one wider than the
other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety. If
the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
11) Only use attachments/accessories
specified by the manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during
lightning storms or when unused for
long periods of time.
14) Refer all servicing to qualified service
personnel. Servicing is required
when the apparatus has been
damaged in any way, such as power-
supply cord or plug is damaged,
liquid has been spilled or objects
have fallen into the apparatus, the
apparatus has been exposed to rain
or moisture, does not operate
normally, or has been dropped.
The following FCC statement applies
only to the version of this model
manufactured for sale in the U.S.A.
Other versions may not comply with FCC
technical regulations.
NOTE:
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio or
television reception, which can be
determined by turning the equipment
off and on, the user is encouraged to try
to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving
antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet
on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
US
4
US
Properly shielded and grounded cables
and connectors must be used for
connection to host computers and/or
peripherals in order to meet FCC
emission limits.
CAUTION
You are cautioned that any changes or
modifications not expressly approved in
this manual could void your authority to
operate this equipment.
This equipment must not be co-located
or operated in conjunction with any
other antenna or transmitter.
This equipment complies with FCC
radiation exposure limits set forth for an
uncontrolled environment and meets
the FCC radio frequency (RF) Exposure
Guidelines. This equipment should be
installed and operated keeping the
radiator at least 20cm or more away
from person’s body (excluding
extremities: hands, wrists, feet and
ankles).
For the customers in Canada
Properly shielded and grounded cables
and connectors must be used for
connection to host computers and/or
peripherals.
This device complies with Industry
Canada’s licence-exempt RSSs.
Operation is subject to the following
two conditions:
This equipment complies with IC
radiation exposure limits set forth for an
uncontrolled environment and meets
RSS-102 of the IC radio frequency (RF)
Exposure rules. This equipment should
be installed and operated keeping the
radiator at least 20cm or more away
from person’s body (excluding
extremities: hands, wrists, feet and
ankles).
(1) This device may not cause
interference; and
(2) This device must accept any
interference, including interference
that may cause undesired operation
of the device.
5
US
Table of Contents
About these operating
instructions ..............................5
What’s in the Box ..........................6
Guide to Parts and Controls ..........7
Listening to the Sound
Listening to a TV and Other
Devices .................................. 14
Listening to Music on a USB
Devi
ce .
................................... 15
Selecting the Sound Effect
Setting the Sound Effect that is
Tailored to Sound Sources .....17
Enjoying Clear Sound with Low
Volume
at
Midnight
(NIGHT) ...................................17
Making Dialogues Clearer
(VOICE) ................................... 18
Making Sound with Low Volume
Easy to Hear by Compressing
Dynamic Range ..................... 18
Adjusting the Volume of the
Subwoofer ............................. 19
Listening to Music/Sound
with the BLUETOOTH Function
Listening to Music from a Mobile
Device ....................................20
Listening to Music on the Mobile
Devi
ce w
ith SongPal .............22
Turning the System On by
Operating the BLUETOOTH
Device ....................................23
Using the Various Functions
Activating Wireless Transmission
Between Specific Units
(SECURE LINK) ........................24
Enjoying Multiplex Broadcast Sound
(A
UDI
O) ..................................25
Saving Power Consumption ........25
Optimizing the Subwoofer Sound
When Installing under a
Sofa ........................................26
Setting the Attenuation Function for
the ANALOG IN and TV IN
(OPTICAL) Jacks .....................26
Troubleshooting
Troubleshooting .......................... 27
Resetting the System ..................30
Additional Information
Specifications ............................... 31
Playable Types of Files ................ 33
Supported Input Audio
Formats ..................................33
On BLUETOOTH
Communication .....................34
Precautions ..................................35
About these operating
instructions
The instructions in these Operating
Instructions describe the controls on
the remote control.
Some illustrations are presented as
conceptual drawings, and may be
different from the actual products.
The default settings are underlined on
each feature description.
Basic Setup
Startup Guide
(separate
document)
6
US
What’s in the Box
•Bar Speaker (1)
•Subwoofer (1)
Remote control (1)
R03 (size AAA) battery (2)
Optical digital cable (1)
•AC adapter (1)
AC power cord (mains lead) (1)
Speaker pad for the subwoofer (4)
•Startup Guide
• Operating Instructions
7
US
Guide to Parts and Controls
Details are omitted from the illustrations.
Front
Remote control sensor
Point the remote control at the
remote control sensor to operate
the system.
N-Mark (page 21)
When using the NFC function, touch
your NFC-compatible device to the
mark.
(input select) button
(page 14)
BLUETOOTH PAIRING button
(page 20)
+/– (volume) buttons
 (power) button
Turns on the system or sets it to
standby mode.
Indicators
For details, see “About the
indicators on the main unit”
(page 8).
Bar Speaker (Main Unit)
8
US
About the indicators on the main unit
Lighting and flashing of the indicator(s) on the main unit indicate the input or status
of the input device.
The indicators flash when turning on/off the function setting or operating the remote
control.
Indicators Status
Lights: TV input is selected.
Flashes once: While changing the volume/subwoofer volume.
Lights in blue: BLUETOOTH connection is established (BLUETOOTH input is
selected).
Flashes once: While changing the volume/subwoofer volume.
Flashes quickly in blue: During pairing standby status.
Flashes in blue: BLUETOOTH connection is being attempted.
Lights: USB input is selected.
Flashes once: While changing the volume/subwoofer volume.
Flashes quickly: While reading data of the connected USB device.
Flashes twice repeatedly: When connecting an unsupported device.
Lights: Analog input is selected.
Flashes once: While changing the volume/subwoofer volume.
Light(s): Sound effect is selected. (page 17)
Indicators Status
Flash twice: One of the following functions is set to on.
–Dolby DRC (page 18)
BLUETOOTH standby (page 23)
Auto standby (page 25)
Sofa mode (page 26)
Attenuation (page 26)
Flashes twice: One of the following functions is set to off.
–Dolby DRC (page 18)
BLUETOOTH standby (page 23)
Auto standby (page 25)
Sofa mode (page 26)
Attenuation (page 26)
Flash twice: The audio channel is set to Main (page 25) or one of the following
functions is set to on.
–Night mode (page 17)
–Voice mode (page 18)
Light for 2 seconds and turn off: The sound effect is set to CLEAR AUDIO+.
• Flash alternately: The subwoofer is attempting to connect to the system with the
Secure Link function (page 24).
Flashes twice: The audio channel is set to Sub (page 25) or one of the following
functions is set to off.
–Night mode (page 17)
–Voice mode (page 18)
9
US
Flashes twice: The audio channel is set to Main/Sub (page 25).
Flash three times: The volume/subwoofer volume level is set to
maximum/minimum.
Flash repeatedly: The sound is muted.
Flash for 10 seconds and the system is turned off: The
protection feature is activated (page 30).
Flash slowly: The system enters standby mode by the
auto standby function.
Indicators Status
10
US
Rear
(USB) port (page 15)
ANALOG IN jack
TV IN (OPTICAL) jack
DC IN jack
11
US
 (power) button
Turns on the subwoofer or sets it
to standby mode.
Power indicator
– Lights in red: The subwoofer is in
standby mode
– Lights in green: The subwoofer is
co
nnected to the system
Lights in orange: The subwoofer is
co
nnected to the system with the
Secure Link function
Flashes in green: The subwoofer is
attem
pting to connect to the
system
– Flashes in orange: The subwoofer
is
attempting to connect to the
system with the Secure Link
function
– Flashes in red: The protection
f
e
ature of the subwoofer is
activated (page 28).
SECURE LINK button (page 24)
Ventilation holes
For safety, do not block the
ventilation holes.
Subwoofer
12
US
Some buttons function differently
depending on how long the button is
pressed. The icons below indicate how
long to press the button.
: Press the button.
: Press and hold the button for
five seconds.
TV (page 14)
Selects the TV connected to the
TV IN (OPTICAL) jack for output
sound.
BLUETOOTH (page 21)
Activates the BLUETOOTH
function on the system.
USB (page 15)
Selects the USB connected to the
(USB) port for output sound.
ANALOG
: Selects the TV connected to
the ANALOG IN jack for output
sound. (page 14)
: Turns on/off the audio
attenuation function. (page 26)
(volume) +*/–
Adjusts the volume.
SW (subwoofer volume) +/–
(page 19)
Adjusts the volume of the
subwoofer.
/ (previous/next)
(page 15, 20)
Go to the beginning of the
previous or next file.
+ (select) (page 15)
Switches between previous and
next folder to be played for USB
playback.
CLEAR AUDIO+
: Selects CLEAR AUDIO+ for the
sound effect. (page 17)
: Activates the secure link
mode. (page 24)
 (power)
Turns on the system or sets it to
standby mode.
Remote Control
13
US
AUDIO*
: Selects the audio channel for
Dolby Digital multiplex broadcast.
(page 25)
: Turns on/off the Dolby DRC
function. (page 18)
VOICE
: Turns on/off the voice mode.
(page 18)
: Turns on/off the sofa mode.
(page 26)
NIGHT
: Turns on/off the night mode.
(page 17)
: Turns on/off the
BLUETOOTH standby mode.
(page 23)
(muting)
Turns off the sound temporarily.
 (play/pause)* (page 15, 20)
Pauses or resumes playback.
MOVIE/MUSIC
: Selects MOVIE or MUSIC for
the sound effect. (page 17)
: Turns on/off the auto
standby function. (page 25)
*The AUDIO, , and + buttons have
a tactile dot. Use it as a guide during
operation.
14
US
Listening to a TV and
Other Devices
1 Press TV, ANALOG, BLUETOOTH,
or USB to select the input that the
desired device is connected.
The indicator of the selected input
on the main unit lights up.
2 Adjust the volume.
Adjust the volume by pressing
+/– on the remote control.
Adjust the subwoofer volume by
pressing SW +/– on the remote
control (page 19).
Tip
If you press on the main unit, the
device changes cyclically as follows.
TV BLUETOOTH USB ANALOG
Listening to the Sound
TV
BLUETOOTH
USB
ANALOG
SW +/–
+/–
TV
TV that is connected to the TV IN
(OPTICAL) jack
ANALOG
TV that is connected to the ANALOG IN
jack
BLUETOOTH
BLUETOOTH device that supports A2DP
For details, see “Listening to Music/
Sound with the BLUETOOTH Function”
(page 20).
USB
USB device that is connected to the
(USB) port
For details, see “Listening to Music on a
USB Device” (page 15).
15
US
Listening to the Sound
Listening to Music on a
USB Device
You can play music files stored on a
connected USB device.
For playable types of files, see “Playable
Types of Files” (page 33).
1 Connect the USB device to the
(USB) port.
2 Press USB.
3 Press  (play/pause).
4 Press – + to switch between
previous and next folder to be
played.
You can go to the beginning of the
previous or next file by using /
on the remote control.
5 Adjust the volume.
Adjust the volume by pressing
+/– on the remote control.
Adjust the subwoofer volume by
pressing SW +/– on the remote
control (page 19).
Do not remove the USB device during
operation. To avoid data corruption or
damage to the USB device, turn the system
off before connecting or removing the USB
device.
If there is a folder on the USB device,
music files are played in order from the
music files on the first hierarchy.
The playback order of music files differs
depending on the file system of the USB
device.
USB
+
SW +/–
+/–

/
Note
Playback Order of Music
First
hierarchy
Second
hierarchy
: Folder
: Music file
16
US
Tip
You can select the playback method by
using SongPal (page 22).
File system Playback order of the folder
and music file
FAT32 Recorded date and time
order (old to new)
NTFS Folder or file name order
17
US
Selecting the Sound Effect
Setting the Sound Effect
that is Tailored to Sound
Sources
You can easily enjoy pre-programmed
sound effects that are tailored to
different kinds of sound sources.
Press CLEAR AUDIO+ or MOVIE/MUSIC
to select the sound effects.
When selecting MOVIE or MUSIC, press
MOVIE/MUSIC repeatedly.
Enjoying Clear Sound
with Low Volume at
Midnight (NIGHT)
You can compresses sound in
accordance with the information
contained in the content by setting the
night mode to on.
Sound is output at low volume with
minimum loss of fidelity and clarity of
dialogue.
Press NIGHT to set the function to on
or off.
When you turn the system off, the night
mode is set to off automatically.
Selecting the Sound Effect
CLEAR AUDIO+
You can enjoy the sound with Sony-
recommended sound field. Sound field is
automatically optimized according to
playback content and function.
The MOVIE and MUSIC indicators light up for
2 seconds and turn off.
MOVIE
Sounds are played back with surround
effects, and they are realistic and powerful,
making them suitable for movies.
The MOVIE indicator lights up.
MUSIC
Sound effects are optimized for listening to
music.
The MUSIC indicator lights up.
MOVIE/MUSIC
CLEAR AUDIO+
Night mode on
The MOVIE and MUSIC indicators flash twice.
Night mode off
The MOVIE indicator flashes twice.
Note
NIGHT
18
US
Making Dialogues
Clearer (VOICE)
You can make dialogs clearer by setting
the voice mode to on.
Press VOICE to set the function to on
or off.
Making Sound with Low
Volume Easy to Hear by
Compressing Dynamic
Range
This function works only when playing
the Dolby Digital signal of the device
that is connected to the TV IN (OPTICAL)
jack. When you set Dolby DRC (Dynamic
Range Control) to on, dynamic range of
the audio signal (range between the
maximum and minimum volume) is
compressed and sound with low
volume is easy to hear.
Hold down AUDIO for 5 seconds to set
the function to on or off.
Voice mode on
The MOVIE and MUSIC indicators flash twice.
Voice mode off
The MOVIE indicator flashes twice.
VOICE
Dolby DRC on
The USB and ANALOG indicators flash twice.
Dolby DRC off
The USB indicator flashes twice.
AUDIO
19
US
Selecting the Sound Effect
Adjusting the Volume of
the Subwoofer
The subwoofer is designed for playback
of bass or low frequency sound.
Press SW (subwoofer volume) +/–
to adjust the volume of the
subwoofer.
When the input source does not contain
much bass sound, such as in TV programs,
the bass sound from the subwoofer may
be difficult to hear.
Note
SW +/–
20
US
Listening to Music from
a Mobile Device
You can listen to music stored on a
mobile device such as a smartphone or
tablet via a wireless connection by
connecting the system and the mobile
device with the BLUETOOTH function.
When connecting to the mobile device
with the BLUETOOTH function, you can
operate by simply using the supplied
remote control without turning the TV
on.
1 Press BLUETOOTH PAIRING on the
main unit.
The system enters the pairing mode
and the BLUETOOTH indicator
flashes quickly.
2 Turn on the BLUETOOTH function,
and then select “HT-MT300/301”
after searching for it on the mobile
device.
If a Passkey is requested, enter
“0000.”
3 Make sure that the BLUETOOTH
indicator on the main unit lights in
blue.
A connection between the system
and mobile device has been
established.
4 Start audio playback with the
music app on the connected
mobile device.
Sound is output from the main unit.
5 Adjust the volume.
Adjust the volume by pressing
+/– on the remote control.
Adjust the subwoofer volume by
pressing SW +/– on the remote
control (page 19).
 and / on the remote
control can be used for the
BLUETOOTH function.
You can pair up to 10 BLUETOOTH
devices. If the 11th BLUETOOTH device is
paired, the least recently connected
device will be replaced by the new one.
Perform pairing for the second and
subsequent mobile devices.
Tip
You can check the connection status of the
BLUETOOTH function by checking the
BLUETOOTH indicator status (page 8).
Listening to Music/Sound with the
BLUETOOTH Function
Listening to Music by Pairing
with a Mobile Device
BLUETOOTH
BLUETOOTH
indicator
BLUETOOTH
PAIRING
Notes
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119

Sony HT-MT300/B Manuel utilisateur

Catégorie
Équipement musical supplémentaire
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues