Plantronics 58270000 Manuel utilisateur

CLARITY, a Division of Plantronics, Inc.

6131 Preservation Drive • Chattanooga, TN 37416

Tel: 800-426-3738 • Fax: 800-325-8871

E-mail: [email protected] • Website: www.clarityproducts.com

XLC3.4, XLC3.5HS, XLC3.5HSB, ClarityLogic, Digital Clarity Power and the amplied gure are

trademarks or registered trademarks of Plantronics, Inc.

Rev. D (03-12)

Printed in China

E

S

P

A

~

N

O

L

F

R

A

N

Ç

A

I

S

E

N

G

L

I

S

H

User Guide

Extra Loud Cordless

Speakerphone with Caller ID

and ClarityLogic

1

E

N

G

L

I

S

H

XLC3.4

IMPORTANT SAFETY INSTRUCTIONS 2

CONTENTS & PARTS CHECKLIST 5

INSTALLATION 6

WALL MOUNTING YOUR XLC3.4 8

BASE - Quick Reference Guide 10

HANDSET - Quick Reference Guide 11

CLARITYLOGIC INFORMATION 14

BATTERY INFORMATION 16

PLACING & ANSWERING CALLS 17

VOLUME & TONE ADJUSTMENTS 18

CALLER ID FUNCTION 19

PHONEBOOK 20

SCREEN DETAILS 20

TELEPHONE MENU 21

HANDSET REGISTRATION 30

TROUBLESHOOTING 31

TECHNICAL SPECIFICATIONS 34

REGULATORY COMPLIANCE 35

WARRANTY INFORMATION 38

TABLE OF CONTENTS

2

XLC3.4

SAVE THESE INSTRUCTIONS

When using your telephone

equipment, basic safety precautions

should always be followed to

reduce the risk of re, electric

shock and injury to persons,

including the following:

1. Read and understand all

instructions.

2. Follow all warnings and

instructions marked on the

telephone.

3. Avoid contact with liquids. Do

not locate base unit or handset

near water, for example, near

a bathtub, wash basin, sink or

laundry tub, in a wet basement

or near a swimming pool.

4. Avoid using a telephone (other

than a cordless type) during a

storm. There may be a remote

risk of electrical shock from

lightning.

5. Do not use the telephone to

report a gas leak in the vicinity

of the leak.

6. Unplug this telephone from the

wall outlets before cleaning.

Do not use liquid cleaners

or aerosol cleaners on the

telephone. Use a damp cloth

for cleaning.

7. Place this telephone on a stable

surface. Serious damage and/

or injury may result if the

telephone falls.

8. Do not cover the slots and

openings on this telephone.

This telephone should never be

placed near or over a radiator

or heat register. This telephone

should not be placed in a built-

in installation unless proper

ventilation is provided.

9. Operate this telephone using

the electrical voltage as stated

on the base unit or the owner’s

manual. If you are not sure

of the voltage in your home,

consult your dealer or local

power company.

10. Do not allow anything to rest

on the power cord or locate

this product in an area where

the power cord is likely to be

damaged by furniture or foot

trafc.

11. Do not overload wall outlets

or extension cords as this can

increase the risk of re or

electrical shock.

12. Never push any objects through

the slots in the telephone. They

can touch dangerous voltage

points or short out parts that

could result in a risk of re

or electrical shock. Never

spill liquid of any kind on the

telephone.

13. To reduce the risk of electrical

shock, do not take this phone

apart. Opening or removing

covers may expose you to

dangerous voltages or other

IMPORTANT SAFETY INSTRUCTIONS

3

E

N

G

L

I

S

H

XLC3.4

SAVE THESE INSTRUCTIONS

risks. Incorrect reassembly can

cause electric shock when the

appliance is subsequently used.

14. Unplug this product from the

wall outlet and refer servicing

to the manufacturer under the

following conditions: when the

power supply cord or plug is

frayed or damaged; if liquid has

been spilled into the product;

if the telephone has been

exposed to rain or water; if the

telephone has been dropped

or the case has been damaged;

if the telephone exhibits a

distinct change in performance;

if the telephone does not

operate normally by following

the operating instructions.

Adjust only those controls that

are covered by the operating

instructions. Improper

adjustment may require

extensive work by a qualied

technician to restore the

telephone to normal operation

if the telephone does not

operate normally by following

the operating instructions.

15. This product should be

operated only from the type

of power source indicated on

the marking label. If you are

not sure of the type of power

supply to your home, consult

your local power company.

16. 16. Do not attempt to open

the AC adapter. There are

potentially dangerous voltages

inside, and there are no

serviceable parts.

17. Discontinue use of product and

contact Clarity if the product

overheats, has a damaged cord

or plug, if the product has been

dropped or damaged or if the

product has come into contact

with liquids.

18. Use only the AC adapter

provided with this product

or a replacement AC adapter

provided by Clarity.

19. This phone amplies sound

to loud volumes. To prevent

hearing damage, all users of the

phone should be informed of

the high volume capability of

the phone and children should

only use the phone when

supervised by an adult.

20. Exposure to high volume sound

levels or excessive sound

pressure may cause temporary

or permanent damage to your

hearing. Although there is no

single volume setting that is

appropriate for everyone,

you should always use your

telephone with the volume

set at moderate levels and

avoid prolonged exposure to

high volume sound levels. The

louder the volume, the less

time is required before your

IMPORTANT SAFETY INSTRUCTIONS

4

XLC3.4

SAVE THESE INSTRUCTIONS

hearing could be affected. If you

experience hearing discomfort,

you should have your hearing

checked by a doctor. To protect

your hearing, you should:

A) Set the volume control

in a low position and

gradually increase the

volume as needed.

Before pressing the

BOOST

button, reduce the

volume to the lowest

level. Use the phone on the

lowest volume setting as

possible.

B) Limit the amount of

time you use the telephone

at high volume levels.

21. If you experience a skin

irritation after using this

product, discontinue use and

contact Clarity.

BATTERY SAFETY

INSTRUCTIONS

Dispose of used batteries

according to the

instructions.

1. Do not dispose of the battery

in a re as it may explode.

Check with local codes for

possible special disposal

instructions.

2. Do not open or mutilate the

battery. Released electrolyte

is corrosive and may cause

damage to the eyes and skin. It

may be toxic if swallowed.

3. Exercise care in handling

batteries in order not to short

the battery with conducting

materials such as rings,

bracelets and keys. The battery

or conduction material may

overheat and cause burns.

4. Remove batteries when they

are discharged and when the

equipment will not be used for

an extended period of time.

Dispose of batteries according

to local environmental laws.

5. Do not disassemble, heat, crush,

deform or puncture batteries.

6. Do not attempt to charge non-

rechargeable batteries.

7. Keep batteries out of the reach

of children.

WARNING: Risk of explosion if

battery is replaced by an incorrect

type.

IMPORTANT SAFETY INSTRUCTIONS

5

E

N

G

L

I

S

H

XLC3.4

TONE

INTERC OM

Base

Handset

Belt clip

AC power adapter

Long

Phone cord

User

guide

Short

Phone cord

XLC3.4

User Guide

































Wall mount bracket

CONTENTS & PARTS CHECKLIST

6

XLC3.4

Connect your telephone as shown on the enclosed Quick Start guide.

Your telephone should arrive pre-assembled. To install it:

1. Remove base from package; pull yellow tab in the direction of the

arrow.

2. Hold one end of your XLC3.4’s long phone line cord tightly. The

correct end to hold should already be plugged into your phone’s jack.

Simultaneously pull the other end of the phone cord away from the

phone, unraveling it and allowing you to plug that end of the cord into a

wall telephone outlet.

3. Plug the loose end of the phone cord into the wall telephone outlet.

4. Hold one end of your phone’s white power adapter cord tightly. The

correct end to hold should already be plugged into the back of your

telephone base unit. Simultaneously pull the other end of the adapter

cord away from the phone, unraveling it and allowing you to plug that

end of the cord into a wall electrical outlet.

5. Plug white power adapter cord on left rear of the base into a wall

electrical outlet.

6. Remove handset from package.

7. Pull the handset’s battery tab located on the bottom of the device in

the direction of the arrow.

8. Place the handset in the base charger. The batteries in the handset must

be fully charged for 10 hours before using the telephone for the rst

time.

9. Lift handset and press TALK to test. If you hear a dial tone, your

telephone is ready for use. If not, check all connections again.

INSTALLATION

7

E

N

G

L

I

S

H

XLC3.4

apide Guía de Inicio Rápido

INSTALLATION

8

XLC3.4

Wall mount your telephone as shown on the enclosed Quick Start guide.

(This is optional.)

1. Follow the instructions in the Installation section on page 6 to remove

the base and handset from the base – steps 1, 4, 6.

2. Unplug the long phone line cord from the phone jack located on the

back of your XLC3.4. Plug one end of the short phone line cord into

the same jack identied by LINE on the back of your base.

3. Install the XLC3.4 base onto the wall mount bracket as shown on page

9. Guide the short phone cord through the wall mount bracket as

shown in the diagram.

4. Using a screwdriver, loosen the screws on your phone wall outlet (1-2

turns).

5. Plug the loose end of the short phone cord into the wall phone outlet.

6. Attach the wall mount bracket (with the XLC3.4 base) onto the wall

phone outlet.

7. Plug the power adapter into a wall electrical outlet.

8. Pull the handset’s battery tab located on the bottom of the device in

the direction of the arrow.

9. Place the handset in the base and allow 10 hours for full charge.

WALL MOUNTING YOUR XLC3.4

9

E

N

G

L

I

S

H

XLC3.4

WALL MOUNTING YOUR XLC3.4

10

XLC3.4

1 Visual Ringer

Lights up when phone rings;

turns on when phone is in

use.

2 IN USE / CHARGE

Light

The light turns red when the

phone is charging, and it turns

green when the phone is in

use.

3 POWER Light

Light is lit green when the

power adapter is plugged in.

During a power outage, the

POWER light will blink green

once every two seconds

when base backup batteries

are installed.

4 FIND

Press this key to locate

handset.

5 SILENT

Press if you want to turn off

the base ringer. The button

lights up red when the ringer

is turned off.

6 VOLUME (UP / DOWN)

Use these keys to increase or

decrease the ringer volume.

7 RINGER STYLE

Use this key to choose the

most comfortable base ring

tone for your environment.

There are six ring tones

available.

NOTE (Base): You can only

set the ringer volume or style

when the phone is not in use.













1

2

7

4

3

5

6

RINGER

STYLE

HIGH OUTPUT

RINGER

BASE - Quick Reference Guide

11

E

N

G

L

I

S

H

XLC3.4





















1

2

4

5

3

8

9

10

6

11

7

1 VOLUME Control

Wheel

Use the rotary control to

increase or decrease the

volume of the incoming call.

The volume level is displayed

on the screen, lower right

corner.

2 BOOST

Press this button to engage

the extra amplication. The

BOOST button turns red

when Boost function is active.

For more details on the

Boost function, see page 16.

3 Speaker



During a call, press to activate

handset speakerphone. Press

again to switch back to

earpiece.

When in speakerphone mode,

the speakerphone icon is

displayed on the screen (to

the left of the battery icon),

and the speakerphone button

lights up red.

4 Phonebook

This button allows you to

access your XLC3.4’s list of

saved names and numbers.

HANDSET - Quick Reference Guide

12

XLC3.4

See page 21.

5 TALK

This button allows you to

make or answer phone calls. It

lights up green during a call.

6 Arrow Buttons (UP /

DOWN)

Press UP or DOWN

arrows to navigate through

the menus.

In standby mode, press UP

or DOWN to access your

Caller List.

7 MENU Button

Press this button to engage

your phone’s available options.

See page 19 for details.

8 Blue ClarityLogic

Button: press the blue

button for direct access

to a Customer Care

Representative.

9 MUTE / BACK (EDIT)

Button

Mute: Allows you to conduct

private conversations you

don’t want heard (during a

call).

Back: In MENU mode, allows

you to return to the previous

screen.

(Edit): When a phone

number is displayed, allows

you to toggle between 7/10/11

digit formats for the number

you are viewing.

10 FLASH / EXIT

FLASH: While on a call,

press FLASH / EXIT to

receive another incoming

call. (Call Waiting service is

required.)

EXIT: In MENU mode,

allows you to return to

standby mode.

11 RD / P (Redial / Pause)

Press to redial last number

dialed or insert pause (two

seconds) when programming

memories or pre-dialing.

12 Headset

A 2.5 mm headset can be

used in the Headset Port. (We

recommend the Plantronics

M175C headset.)

13 TONE

Press to select the audio tone

for the handset. See page 16.

14 Intercom

Press to call other handset on

system.

15 RINGER ON / OFF

Switch to turn handset ringer

on or off.

16 NECKLOOP

A 3.4B mm neckloop can be

used in the Neckloop Port.

(We recommend the Clarity

CE30 Neckloop.)

HANDSET - Quick Reference Guide

13

E

N

G

L

I

S

H

XLC3.4

VOLUME

TONE

INTERCOM

ON OFF

NECK

LOOP

12

13

14

15

16

17

18

19

17 Belt Clip

The belt clip comes pre-

attached.

18 Speaker Grill

19 Battery Compartment

HANDSET - Quick Reference Guide

14

XLC3.4

ClarityLogic is the name of our simplied and easy-to-

use customer support service. While talking to a Clarity

representative, the telephone sends information such as its

model name and settings to Clarity. The representative is

immediately aware of the type and current settings of the

phone. This will allow any troubleshooting call to be quick

and simple, helping you nd exactly what you are looking for.

Just call 1-877-LOGIC24 (1-877-564-4224) to nd out how

Clarity is there to make life easier.

ClarityLogic® Memory Dial

For your convenience, Clarity has pre-programmed

the customer support number into your phone’s blue

ClarityLogic button.

NOTE: ClarityLogic has been designed to work with the

Plain Old Telephone Service (POTS). If your phone service is

provided by a broadband service provider, ClarityLogic may

not work. ONLY CLARITYLOGIC MAY BE DISABLED. ALL

OTHER FEATURES WORK AS DESCRIBED IN THIS USER

GUIDE.

Introduction to ClarityLogic

15

E

N

G

L

I

S

H

XLC3.4

Your device will automatically send Clarity various types

of information as part of the Clarity services, which may

include the phone number associated with your device.

This information may be combined with account and other

information we have on record regarding you or your

device or may be transmitted to us by your device. To

assist with remote diagnostics and other customer services

functions, your device may also regularly send us certain

information associated with your device, including software

and hardware settings, the phonebook, caller ID history

and other information you have stored on the device.

All of such information, together with other information

that we have on record regarding you and your device, is

collectively referred to as the “Subscription Data.” We use

this information to diagnose and troubleshoot any device

issues as well as to provide you with the services.

You agree that Clarity and its subsidiaries, afliates, partners,

suppliers and agents (collectively, “Afliates”) may collect,

store, access, disclose, transmit, process and otherwise

use your subscription data to provide you with the Clarity

services, address your requests, provide technical support,

process transactions for your account and otherwise use

such subscription data in accordance with Clarity’s privacy

policy (http://clarityproducts.com/about-clarity/privacy-

policy/), which is hereby incorporated by reference. Clarity

may also provide or enable certain services through your

device that rely upon location information. In order to

provide such services, Clarity and its Afliates may collect,

store, access, disclose, transmit, process and otherwise

use your location data (including real time geographic

information) in accordance with Clarity’s privacy policy.

Subscription Data and Privacy

16

XLC3.4

HANDSET

The batteries in the handset must be fully charged for 10 hours before using the

telephone for the rst time.

Battery life: Talk time is 6.5 hours, while standby is 130 hours without usage. Actual

times will vary depending on the amplier settings used. Replace batteries every two

years.

Battery spec (as supplied with your phone): 3xAAA NiMH rechargeable

batteries,(1.2V 600mAh NiMH - model 60AAAHC, GPI International Ltd. or HFR-

44AAAJ600, Shenzhen Highpower Technology Co., Ltd).

To replace batteries, remove the handset battery cover and install new batteries, then

close battery cover.

BASE

The base backup batteries ensure the functionality of your cordless phone (3-4 hours)

in case of a power outage.

When the base unit operates in battery mode (no AC power). the base POWER light

Open battery

compartment door

here.

BATTERY INFORMATION

will blink once every two seconds.

To install batteries in the base:

1. Turn base over and open battery compartment door.

2. Install batteries according to the polarity shown inside the battery compartment.

NOTE: To replace handset batteries or to install base backup

batteries, use ONLY standard rechargeable AAA NiMH batteries -

600mAh.

LOW BATTERY INFORMATION

Handset

1. The battery icon on the screen shows no bars; the screen displays “Low Battery”.

2. The handset beeps every two seconds in OFF HOOK mode.

3. The TALK button blinks green twice every 15 seconds in standby mode. It will not

ash an alert in OFF HOOK mode.

Base (if optional batteries are installed)

1. The POWER light will blink green once every ve seconds.

WARNING: Use rechargeable batteries only.

Do NOT use alkaline batteries!

17

E

N

G

L

I

S

H

XLC3.4

TO PLACE A CALL:

1. Press TALK, then dial the number

using the numeric keypad. See

lighting pattern for the TALK button

on the bottom of the page.

2. Adjust the volume to the most

comfortable level - using the Volume

Control and BOOST button (if

necessary).

3. Press the TONE button on the

side of the handset to adjust the

tonality of the incoming voice to

the most comfortable level.

WARNING: VOLUME MAY BE

LOUD!

NOTE:

1. If the Voice Assist function is

enabled, you will hear the digits of

the incoming phone number.

2. Step 1 above can be replaced with

one of the following options:

• Dial from CID records: Choose a

record from your Caller List (see

page 17), then press TALK.

• Dial from PHONEBOOK: Choose a

record from your Phonebook (see

page 18), then press TALK.

• Pre-dial: before pressing TALK,

dial the number you wish to call;

digits will display on the screen;

press TALK when the number is

complete.

Follow with steps 2-3 above to

enjoy a clear and comfortable phone

conversation.

TO ANSWER A CALL:

1. When phone is ringing, press

TALK to answer the call.

2. Adjust the volume and tone of the

incoming voice according to your

preferences.

3. When nished, press TALK to

hang up.

NOTE:

1. For an explanation of the TALK

button light, see the bottom of the

page.

2. If you have CID service, note the

incoming phone number displayed

on your screen.

3. If the Voice Assist function is

enabled, you will hear the digits of

the incoming phone number.

4. At any point during the

conversation, press the

speakerphone button



to

switch to handsfree mode. Use the

volume control for adjusting the

level of the incoming audio. Switch

back to earpiece mode by pressing

the speakerphone button again.

Talk Button Lighting Pattern

Green: Phone is in use.

Flashing Green every 15 seconds in

standby mode: Low batteries.

PLACING & ANSWERING CALLS

La page est en cours de chargement...

Plantronics 58270000 Manuel utilisateur

Ce manuel convient également à

Plantronics 58270000 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents