Xiaomi S1 Manuel utilisateur

S1
Xiaomi
Marque
Xiaomi
Modèle
S1
Taper
Manuel utilisateur
SMART RGB LED
TABLE LAMP
S1
User Manual Questions or Concerns?
SAFETY INSTRUCTIONS
· To ensure correct and safe installation, usage and functioning of
the unit, always follow these instructions carefully and keep for
future reference.
· DO NOT place or operate near extreme heat sources, moisture, or
corrosive substances.
· DO NOT operate any lamp with a damaged cord or after
malfunction occurs, or damaged in any manner. Discard the lamp,
or return it to an authorized service facility for examination or repair.
· DO NOT operate the product with wet hands as it may cause
electrical shock.
· DO NOT dismantle the unit by yourself, always ask professional
electricians or authorized technicians for repair.
· It is not a toy. Close attention is necessary when used by or near
children. Children should be supervised to ensure that they do not
play with the unit.
1. Short Press: switch light mode; Long Press: clear pair information
with phone; Double Click: change work mode.
2. Short Press: previous song; Long Press: volume -
3. Short Press: play and pause; Long Press: power on
4. Short Press: next song; Long Press: volume +
• For BT speaker: Connect BT SSID named “COZYLIFE_XX”
• For CozyLife APP:
1. Download CozyLife APP, and sign in.
2. Add device in the pop-up, and choose the preferred interface.
1 x Table Lamp
1 x TF Card (Built-in)
1 x Type-C Charging Cable (1m)
1 x User Manual
Specifications
Package Contents
Input
Power
Battery Capacity
CRI
Energy Efficiency Level
Color Temp
DC 5V / 1A
5W
2200mAH
≥80
G
RGBIC
USING YOUR TABLE LAMP
Control Panel
Connections
Bluetooth music mood light
CLEANING AND MAINTENANCE
Note:
Always turn off the light and unplug the cord before
cleaning or maintenance.
Do not use abrasive
cleaning tools or
aggressive liquids
to clean the lamp.
Do not immerse in
water or any other
liquids.
Correct Disposal of This Product (Waste Electrical &
Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that
the product and its electronic accessories should not be disposed of
with other household waste at the end of their working life. To
prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other
types of waste and recycle them responsibly to promote the
sustainable reuse of material resources. Household users should
contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can
take these items for environmentally safe recycling. Business users
should contact their supplier and check the terms and conditions of
the purchase contract. This product and its electronic accessories
should not be mixed with other commercial wastes for disposal.
WEEE Compliance
Made in China
FCC STATEMENT:
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The device must not be co-located or operating in conjunction with
any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation
IC STATEMENT
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
The device is compliance with RF field strength limits, users can
obtain Canadian information on RF exposure and compliance.
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 0cm between
the radiator & your body.
Déclaration d’exposition aux radiations
Cet équipement est conforme aux limites d’exposition aux
rayonnements IC établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de
0cm de distance entre la source de rayonnement et votre corps.
  • Page 1 1
  • Page 2 2

Xiaomi S1 Manuel utilisateur

S1
Xiaomi
Marque
Xiaomi
Modèle
S1
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Autres documents