EZVIZ CSA3WA Mode d'emploi

Taper
Mode d'emploi
COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the
properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”).
This user manual (hereinafter referred to as “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the
prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not
make any warranties, guarantees or representations, express or implied, regarding
to the Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to change,
without notice, due to firmware updates or other reasons. Please find the latest
version in the ™ website (http://www.ezvizlife.com).
Revision Record
New release – January, 2021
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the properties of
EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are
the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED
AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS,
OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG
OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS
PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT
SHALL EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL
PURCHASE PRICE OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR
PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE
TERMINATION CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN
AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C)
FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT
LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS,
AND AMONG OTHERS.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE
ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS
AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL
RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN
ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH
ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE
LAW, THE LATTER PREVAILS.
Table of Contents
Overview ��������������������������������������������������������� 1
1� Package Contents ����������������������������������������������������������������������������1
2� Basics ����������������������������������������������������������������������������������������������1
Get the EZVIZ App ������������������������������������������� 2
Select Appropriate Location ����������������������������� 2
Connect to Power Source ��������������������������������� 3
Connect to Network ����������������������������������������� 3
Add Device ������������������������������������������������������ 3
1� Add Gateway ������������������������������������������������������������������������������������3
2� Add Sub Devices �������������������������������������������������������������������������������4
Operations on the EZVIZ App ��������������������������� 5
1� Homepage ����������������������������������������������������������������������������������������5
2� Settings��������������������������������������������������������������������������������������������5
1
Overview
1� Package Contents
Home Gateway Power Adapter
USB Cable Regulatory Information Quick Start Guide
The power adapter's appearance is subject to the one you have bought.
2� Basics
LED Indicator Ring
Function Key
Speaker
Power Port
RESET Hole
Network Port
Antiskid Mat
Name Description
Functional
Button
• Press and hold the button for over 4s, the gateway will enter Wi-
Ficongurationmode.
• Press the button once, the gateway will enter device adding
mode; press again, the gateway will exit device adding mode.
• If the gateway sends alarms, press the button to clear alarms.
2
LED Indicator
Ring
White
• Solid: Working properly and has been connected to the EZVIZ
Cloud.
• Slow-ashing:Entereddeviceaddingmode.
• Fast-ashing:Conguringnetwork.
Orange
• Solid: Starting up or upgrading.
• Slow-ashing:Oine.
• Fast-ashing:Breakdownsoccuroralarmsproduced.
RESET Hole
While the gateway is running, poke the hole with SIM card eject
needles or clips for over 4 seconds, the gateway will restart, and
theWi-Ficonguration,localrecords,currentalarmstatusandall
sub devices will be cleared. After resetting the gateway, there will
be a voice prompt.
Get the EZVIZ App
1� Connect your mobile phone to Wi-Fi (suggested)�
2� Download and install the EZVIZ app by searching for “EZVIZ” in the App Store
or Google PlayTM
3� Launch the app and register an EZVIZ user account�
EZVIZ App
If you have already used the app, please make sure that it is the latest version. To
ndoutifanupdateisavailable,gototheappstoreandsearchfor"EZVIZ".
Select Appropriate Location
• The gateway needs to be plugged in�
• To ensure that the connection between the gateway and sub devices is stable,
please place the gateway at the center of the sub devices, and the distance
betweenthegatewayandtheroutershouldbe≤6meters.
• There should be no metal obstacles and walls between the gateway and sub
devices, and the gateway and the router
• Do not place any gateway or detector on the top of the router
Router
Gateway
≤6m
3
Connect to Power Source
Plugthegatewayin.Whenstartupthegatewayforthersttime,theLEDindicator
ring turns from solid orange to fast-flashing white, which means that the gateway
hasenterednetworkconguringmode.
Power Adapter
Outlet
Connect to Network
• Wired network is recommended� You need to connect the gateway to the LAN
port of the router with power cable (purchase separately) as displayed in the
gurebelow.
Router
• You can also use wireless network� Scan the QR code at the bottom of the
gateway with the EZVIZ app, and then connect the gateway to Wi-Fi by following
the on-screen instructions�
If Wi-Fi connection failed, or you want to connect the gateway to another Wi-Fi, you need
to makethegatewayoinerst.Pressandholdthefunctionalbuttonforover4seconds
until you hear the voice prompt, and then connect the gateway to Wi-Fi by following the on-
screen instructions.
Add Device
1� Add Gateway
1� Connect your phone to Wi-Fi�
2� Log in to your account through the EZVIZ app�
3� Tap the device adding icon, and then the QR code scanning interface will be
displayed�
4
4� Scan the QR code at the bottom of the gateway or on the cover of the user
manual�
Scan QR Code
5� Add the gateway by following the wizard on the app�
2� Add Sub Devices
1� Press the functional button of the gateway once to make the gateway enter
device adding mode, and the LED indicator ring is in slow-flashing white�
2� Make sub devices enter adding mode as instructed by user manuals of sub
devices�
3� There will be voice prompt reminding you that sub devices have been added
to the gateway automatically
5
Operations on the EZVIZ App
The app interface may be different due to version update, and the interface of the app you
installed on your phone shall prevail.
1� Homepage
When you launch the EZVIZ app, you can manage the gateway and the sub devices
as needed on the homepage�
Sub devices Click sub devices, you can see and manage it as needed.
Add smart sub-devices Click this icon, you can add your sub device to the
gateway.
Dismiss Clear alarms of all sub devices.
2� Settings
Parameter Description
Device Name Customize the name of your device.
Sub-devices upgrade
automatically
When enabled, the sub-devices will upgrade
automatically after downloading upgrading packages.
Alarm Settings Youcansetthenoticationparametersasneeded.
Light Setting When disabled, the indicator ring will be off.
Network Settings You can see the Wi-Fi name and the connection status.
Device Information You can see the device information here.
Delete Device Tap to delete the gateway from EZVIZ cloud.
Regulatory Information
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the Radio Equipment
Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For
more information see: www.recyclethis.info.
EC DECLARATION OF CONFORMITY
Hereby, Hangzhou EZVIZ Software Co., Ltd. declares that the radio equipment type [CS-A1S-32W (E2G),
CS-A1-32W, CS-A3, CS-T1C, CS-T2C, CS-T3C, CS-T9-A, CS-T4-A] is in compliance with Directive 2014/53/EU.
The full text of the EC DECLARATION OF CONFORMITY is available at the following web link:
http://www.ezvizlife.com/declaration-of-conformity.
2006/66/EC and its amendment 2013/56/EU (battery directive): This product contains a battery that
cannot be disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with this symbol, which may
include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the
battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info.
Use only power adapters listed in the Table.
Equipment model Adapter manufacture Adapter model
CS-A1-32W/
CS-T9-A/
CS-A3/
CS-A1S-32W (E2G)
ADS-5RE-06 05050EPCU/EPC(US), ADS-5RH-06 05050EPB(UK),
ADS-5RH-06 05050EPG(EU), ADS-5RH-06 05050EPSA(AU),
ADS-5RH-06 05050EPBR(BR), ADS-5RH-06 05050EPI(IN),
ADS-5MA-06A 05050GPK(KR)
Sichuan Jiuzhou Electronic Technology Co., Ltd DYS05100CP-U,DYS05100CP-E
Shenzhen Honor Electronic Co Ltd
Important Safety Information
Note: Please read the manual before using the device.
Direct current.
This symbol on the device indicates that the safety compatibility manual and / or installation manual must be read, which contains
information related to the safe operation of the device.
Caution: Be sure to read these instructions before operating the equipment.
Warning: If you want to disconnect the device from the power source, please unplug the DC power terminal that connects the
power adapter and device.
Warning: Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery that can result in an
explosion.
Warning: Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the
leakage of flammable liquid or gas.
Warning: A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or
gas.
Warning: Dispose of used batteries according to the instructions.
Warning: Replace only with the same or equivalent type recommended by the manufacturer.
Caution: THE PRODUCT IS BUILT IN A REPLACEABLE BATTERY.
Warning: Do not ingest battery, Chemical Burn Hazard.
Caution: This product contains a coin/button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
Caution: Keep new and used batteries away from children.
Caution: If the battery compartment does not close securely, stop using the product and keep it away from children.
Caution: If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical
attention.
Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.
Warning: For SELV DC input: the DC power source shall comply with the Safety Extra-Low Voltage (SELV) requirements of
IEC/EN 60950-1, IEC/EN 62368-1.
Warning: The power source should meet limited power source or PS2 requirements according to IEC/EN 60950-1 or IEC/EN
62368-1.
102030403, A
The power source should meet limited power source or PS2 requirements according
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and
your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the
device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and
your body.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de
licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par
Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres
utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée
équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication
satisfaisante.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.
IFETEL Information
La operación de este equipo está sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia perjudicialy
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su
operación no deseada.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

EZVIZ CSA3WA Mode d'emploi

Taper
Mode d'emploi

dans d''autres langues