Bluewave BG2233 Mode d'emploi

SURE SHOT DUAL ELECTRONIC

BASKETBALL GAME

ASSEMBLY INSTRUCTIONS

NG2233BL

Please Do Not Hesitate to

Contact Our Consumer Hotline

at

800-759-0977

with Any Questions That May

Arise During Assembly or

Use of This Product!

THANK YOU!

Thank you for purchasing this product.

We work around the clock and around the globe to ensure that our products

maintain the highest possible quality. However, in the rare case of issues

during assembly or use of this product, please contact our Consumer Hotline

at 800-759-0977 for immediate assistance before contacting your retailer.

Please read the warranty information at the back of these assembly

instructions for further details.

IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS

IN ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.

2

PARTS IDENTIFIER (NOT TO SCALE)

3

HOME

VISITOR

TIME

9

10 11

12

13 14 15

16

Switch Sensor Control Box with Wire Electronic Scorer

2 3 4

x2 x2 x1 x1

6 7 85

x1 x2 x2

x2 x2 x1 x2

x4 x1 x2 x1

x1

Rim

18 19 20

Inflation Pump with NeedleRim Support Plate

x2 x1

21

Backboard

x1

M6 Washer

22

x64

M6 x 20mm Bolt

23

x16

M6 x 30mm Bolt

24

x6

25

M6 x 42mm Bolt

x4

M6 x 48mm Bolt

26

x4

M6 x 35mm Bolt

27

x2

M6 Nut

28

x32

29

3.5 x 10mm Bolt

x4

4 x 28mm Bolt

x2

Electronic Scorer Face Plate

30

x1

Basketball

7" Dia.

31

Wrench

32

x1

17

x2

End Cap

x2

Tube 1

Ø22x580x440mm

Tube 2

Ø22x685mm

Tube 3

Ø22x890mm

Tube 4

Ø22x890mm

Tube 7

Ø22x830mm

Tube 8

Ø22x835mm

Ø12.7x1070mm

Ø22x740mm

Tube 5

Ø22x755x580mm

Tube 6

Ø22x755x580mm

Ø22x540x385mm

Ø22x1065x520mm

1

NGP6020

NGP6034

NGP6023

NGP6033

NGP6024

NGP6022

NGP6027

NGP6021

NGP6028

NGP6026

NGP6031

NGP6025

NGP2217

NGP6030

NGP6035

NGP6029

NGP6036 NGP6038 NGP6039NGP6037

NGP6040 NGP6041* NGP6041*NGP6041*

NGP6041* NGP6041* NGP6041*NGP6041*

NGP6041* NGP6042 NGP6041*NGP6041*

Tube 11

Tube 12

Tube 9 Tube 10

*Items included in Hardware Pack, NGP6041 6/15 For replacement parts please call 800-759-0977.

PARTS IDENTIFIER (NOT TO SCALE)

4

For replacement parts please call 800-759-0977.

33

Allen Key

x1

34

Ball Return Net

x1

35

Lock Pin

Net

Spring Lock

Plastic Pole Insert

A1 A2

x2 x2

Self-Stick Strap

x2

x9

x2

A3

A4

PRE-INSTALLED PARTS

Power Tools

- Set Low Torque

High Torque

over tightened

X 2

Strong Adults Needed No Children in

Assembly Area

Keep away from pets Do not use or keep product

outdoors. For indoor use only.

No wet/humid conditions.

TOOLS REQUIRED

• Phillips Screwdriver - Not included

• Standard (Flat Head) Screwdriver - Not included

• Allen Wrench - Included

Electric Screwdrivers may be helpful during assembly;

however, please set a low torque and use extreme caution.

CAUTION!

NGP6043 NGP6044NGP6041*

*Items included in Hardware Pack, NGP6041

5/14

ASSEMBLY TIPS

5

1. Find a clean, level surface to begin the assembly of your basketball game. We recommend

that two adults work together to assemble this game. You may want to carefully cut or tear

the four corners of the box so that the bottom of the box can be used as your work surface.

2. Remove all of the contents from box and verify that you have all of the parts shown on

Note: Some parts may be pre-installed

or pre-assembled.

understand the text before beginning each assembly step.

4. When installing parts that have more than one screw or bolt, hand tighten all

5. Electric screwdrivers may be helpful during assembly; however, please set a low torque

and use extreme caution because screws may be stripped or overtightened, resulting in

damaged parts, if the electric screwdriver’s torque is set too high.

WARNINGS!

READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETY INSTRUCTIONS CAREFULLY.

CHOKE HAZARD - THIS TABLE CONTAINS SMALL BALLS AND PARTS

NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.

THANK YOU!

6

ASSEMBLY INSTRUCTIONS

FIG. 1 & 2

1. Attach Tubes 2 (#2) to Tube 3 and Tube 4 (#3 & #4) using spring lock (pre-installed) as shown in FIG.1.

2. Attach Tubes 7 (#7) to Tubes 8 (#8) using spring lock (pre-installed) as shown in FIG.2

2

3

4

7

8

X 2

X 1

X 2

FIG. 1

FIG. 2

Punched hole

7

8

A2

Spring Lock

A2

Spring Lock

FIG. 3

A2

Spring Lock

5

6

5

6

X 1

FIG. 3

3. Attach Tube 5 and Tube 6 (#5 & #6) together using spring lock (pre-installed) as shown in FIG.3.

FIG. 4

4. Attach Tube 5 and Tube 6 (#5 & #6) to Tube 3 and Tube 4 (#3 & #4) using Bolts (#26), Washers (#22) and Nuts (#28),

and then attach Tube 5 and Tube 6 (#5 & #6) to Tubes 8 (#8) using Bolts (#26), Washers (#22) and Nuts (#28) as shown

in FIG. 4, 4A and 4B.

5. Attach Tubes 7 and Tubes 8 (#7 & #8) to Tube 2 (#2) using Bolt (#24), Washers (#22) and Nuts (#28) as shown in

FIG. 4C, repeat this step for other side. NOTE: Make sure the spring lock is facing down.

ASSEMBLY INSTRUCTIONS (CONT.)

7

22

24

26

28

X 12

X 2

X 4

X 6

FIG. 4

5

3

4

2

8

6

7

2

FIG. 4A

26

28

22

FIG. 4B

22

26

22

28

FIG. 4C

22

28

24

FIG. 5

6. Attach Tube 12 (#12) to Tubes 2 (#2) using Bolts (#24), Washers

(#22) and Nuts (#28) as shown in Fig. 5A, and then insert Tubes 1

(#1) onto Tubes 2 (#2) as shown in FIG. 5.

7. Attach Tubes 9 (#9) to Tube 5 and Tube 6 (#5 & #6) using Bolt (#27),

Washers (#22) and Nuts (#28) as shown in FIG. 5 and 5B

ASSEMBLY INSTRUCTIONS (CONT.)

8

1

9

12

22

24

27

X 2

X 1

X 8

X 2

28

X 4

FIG. 5

1

FIG. 5A

12

2

1

2

24

28

22

9

5

6

9

28

22

27

FIG. 5B

A3

FIG. 6

8. Attach Tubes 10 (#10) to Tubes 9 (#9) using

spring locks (pre-installed), and then insert Tube 11 (#11)

onto Tubes 10 (#10) using spring locks (pre-installed) as shown in FIG. 6.

ASSEMBLY INSTRUCTIONS (CONT.)

9

10

FIG. 6

9

Long

Short

10

X 2

11

X 1

11

10

11

A2

Spring Lock

A2

Spring Lock

THANK YOU!

10

ASSEMBLY INSTRUCTIONS (CONT.)

FIG. 7

9. Attach Rims (#17) and Rim Support Plates (#18) to the Backboard (#21) using the Bolts (#23), Washers (#22) and

Nuts (#28). Attach the Switch Sensors (#15) to the Backboard (#21) using the Bolts (#23), Washers (#22) and Nuts (#28).

NOTE: Make sure that you use washer on both sides of the backboard as shown in FIG. 7.

FIG. 8

10. Attach the Electronic Scorer Face Plate (#31) to the front of Backboard and connect with the Electronic Scorer (#14)

using Bolts (#29) as shown in FIG. 8.

FIG. 7

28

15

17

22

23

28

22

18

21

15

17

18

21

22

23

28

X 2

X 1

X 32

X 16

FIG. 8

TIME

VISITOR

HOME

29

14

31

14

29

31

X 1

X 4

X 1

HOME

VISITOR

TIME

FIG. 9

11. Slide elastic straps and sleeve of Ball Return Net (#35) onto Top Tubes 1 (#1) as shown in FIG. 9A & 9B.

12. Slide Tube 12 (#12) through the sleeve on the front of the Ball Return Net (#35), attach the left side first using

Bolts (#24), Washers (#22) and Nuts (#28) as shown in FIG. 9C. Follow the same procedure on the right side.

ASSEMBLY INSTRUCTIONS (CONT.)

11

X 1

X 4

X 2

12

X 1

35

22

24

28

11

12

FIG.9

FIG.9A

FIG.9B

FIG.9C

A4

Lock Pin

FIG. 10

13. With the help of another adult, attach the Backboard (#21) to Top Tubes 1 (#1) using Bolts (#25), Washers (#22),

Nuts (#28) and End Caps (#20) as shown in FIG.10A. At each bottom hole of the backboard, attach the ramp tabs of

Ball Return Net (#35) using Bolts (#25), Washers (#22), Nuts (#28) as shown in FIG.10B.

14. Connect the Lock Pins (#A4) to Tube 5 andTube 6 (#5 & #6) and insert them into Tube 5 and Tube 6 (#5 & #6) as

shown in FIG.10C.

ASSEMBLY INSTRUCTIONS (CONT.)

12

FIG. 10

35

12

21

25 22

22

1

20

28

FIG. 10A

Ramp Tab

21

25

34

22

1

2

28

FIG. 10B

FIG. 10C

A1

X 8

X 4

22

25

28

X 2

20

A4

Lock Pin

FIG. 11

15. Attach the Control Box (#16) to the middle of Tube 11 (#11) using two Bolts (#30) as shown in FIG.11A.

16. Run the rest of the Control Wire through the loops on the bottom side of the Ball Return Net (#35). Hold the Control

Wire on Tube 11 (#11) using the Self-Stick Straps (#34) as shown in FIG.11.

ASSEMBLY INSTRUCTIONS (CONT.)

13

Control Wire

X1

16

X2

30

X2

34

FIG.11

11

16

34

30

11

35

FIG. 12

14

Sensor Wire

Electronic Scorer

Control Wire

FIG. 12A

ON / OFF

CONTROL

WIRE /

CONTROL

CABLE

VISITOR

FIG. 12

17. Connect the Sensor Wire from Switch Sensor (#15) to the Electronic Scorer (#14) as shown in FIG.12.

Connect the Control Wire to the Electronic Scorer (#14) as shown in FIG.12 and 12A.

FIG.11A

FIG. 13

18. To fold game up when not in use, remove Lock Pins (#A4), fold the front of the basketball game up and re-insert

Lock Pins (#A4) as shown in FIG.13. Note: The Lock Pins need to be removed before folding closed or open.

ASSEMBLY INSTRUCTIONS (CONT.)

14

FIG. 13

IMPORTANT!

Make sure to use the

Lock Pin (#A4) when folded.

A4

Lock Pin

ON / OFF

CONTROL

WIRE /

CONTROL

CABLE

VISITOR

ELECTRONIC SCORER OPERATION

Installing Batteries:

Using a screwdriver, unscrew lid and open the

battery box. Insert 3 “AA” batteries ( not included)

in the order of polarity as shown on the inside

cover. Close the cover and tighten screw.

Turn the power ON using the ON/OFF switch.

Reminders:

• Batteries must be installed according to the

correct polarization (+ and -) requirement.

• Please clean the battery contacts, and also those

of the device, prior to battery installation.

• If the game will not be used for a long period of time,

we recommend that the batteries should be removed.

ASSEMBLY INSTRUCTIONS (CONT.)

15

WARNING:

!

1) Requires 3 “AA” batteries (not included).

2) Do not mix old and new batteries.

3) Do not mix alkaline, standard (carbon zinc), or

rechangeable (nickel-cadmium) batteries.

ON/OFF

PLAY

SELECT

UP

SELECT

DOWN

SOUND

PAUSE

RESET

CONTROL PANEL

CONTROL BOX OPERATION

Press "ON/OFF" to activate the scorer.

Scoreboard "HOME" shows "01" (pre- set game 1).

Press "SELECT UP and DOWN" to select a game.

Press "PLAY" to enter selected game mode.

Press "SOUND" to switch sound ON/OFF while playing.

Press "PAUSE" to pause or start time counting.

Press and hold the button "ON/OFF" 3 seconds to turn off scorer.

Press and hold the button "RESET" 3 seconds to reset the games.

NOTE: If no shot is made or no button is pressed in 15 mins,

scorer will be turned off automatically.

1. Beat the Clock

Press "PLAY" to enter game 1.

Press "UP/Down" to select single/multiple players

(P1/P2/P3/P4).

Press "PLAY" after the number of players is selected.

Press "UP/Down" to select playing time, 30/45/60 seconds.

Press "PLAY" to begin the game.

Scoreboard "HOME" shows Player 1, 3;

Scoreboard "VISITOR" shows Player 2, 4.

All shots worth 2 points until last 10 seconds, then each

score counts 3 points. Countdown 5 seconds to next

player's turn when one player finishes game. Player with

most points scored wins ( LED will flash on player with

higher score).

Press "PLAY" to restart this game.

2. 3 Point Beat the Clock

Press "PLAY" to enter game 2.

Press "UP/Down" to select single/multiple players

(P1/P2/P3/P4).

Press "PLAY" after the number of players is selected.

Press "UP/Down" to select playing time, 30/45/60 seconds.

Press "PLAY" to begin the game.

Scoreboard "HOME" shows Player 1, 3;

Scoreboard "VISITOR" shows Player 2, 4.

All shots made count 3. Countdown 5 seconds to next

player's turn when one player finishes game. Player with

most points scored wins ( LED will flash on player with

higher score).

Press "PLAY" to restart this game.

3. Battle Back

Press "PLAY" to enter game 3.

Press "UP/Down" to select multiple players (P2/P4).

Press "PLAY" to begin the game.

Shot made in "HOME" frame, +2 points scored display on

"HOME" board and -2 points for "VISITOR".

Shot made in "VISITOR" frame, +2 points scored display

on "VISITOR" board and -2 points for "HOME".

Once a player scores 10 points they win and game

is finished.

Press "PLAY" to restart this game.

4. Horse

Press "PLAY" to enter game 4.

Press "UP/Down" to select multiple players (P2/P3/P4).

CHOOSE FROM 8 DIFFERENT GAME OPTIONS

16

Press "PLAY" after the number of players is selected.

Player has to make a shot in 2 seconds.

First player is allowed to shoot at any hoop (HOME or

VISITOR). If first player scores in 2 seconds, no letter is

given. Game continues for next player. Scoreboard will

display "next player (P2P3/P4)" and LED will flash twice

in a second. After flash, next player has to duplicate the

shot in the same hoop selected by first player.

If player can't score in 2 seconds, player receives the first

letter "H" which will display on scoreaboard. Game remains

for the same player untill the player scores. If player keeps

missing, player receives "O" followed by "R", "S", "E".

After the letter "E" is given, the player is out.

The first player to spell "horse" is out. Play continues until

last player to spell “horse” wins.

Press "PLAY" to restart this game.

5. Check Point

Press "PLAY" to enter game 5.

Press "UP/Down" to select single/multiple players

(P1/P2/P3/P4).

Press "PLAY" after the number of players is selected.

"HOME" displays "player", "VISITOR" displays "24" points,

pre-set 40 seconds playing time.

Points scored will display on scoreboard "HOME".

Before time is out, once 24/52/68/86 points is scored,

playing time increases 10/20/10/20 seconds respectively.

Countdown 5 seconds to next player's turn when one

player finishes game.

Player with most points scored wins ( LED will flash on

player with higher score).

Game is finished when a player scores 98 points.

Press "PLAY" to restart this game.

6. Around the World

Use tape to mark shooting lines.

Press "PLAY" to enter game 6.

Press "UP/Down" to select single/multiple players

(P1/P2/P3/P4).

Press "PLAY" after the number of players is selected.

"HOME" scoreboard displays Player 1/2/3/4, "VISITOR"

displays points scored.

Once score reaches 10 points or time reaches 99 seconds,

5 second countdown, until next player’s turn, when one

player finishes game.

Player who finishes the game first wins (LED will flash

on winner).

Press "PLAY" to restart this game.

7. Left and Right Shoot

Press "PLAY" to enter game 7.

Press "UP/Down" to select single/multiple players

(P1/P2/P3/P4).

Press "PLAY" after the number of players is selected.

Press "UP/Down" to select playing time, 30/45/60 seconds.

Press "PLAY" to begin the game.

Scoreboard "HOME" displays Player,

"VISITOR" displays points

Make a shot in "HOME" frame when LED is flasing on

"HOME", 2 points scored display on “HOME”.

Make a shot in "VISITOR" frame when LED is flasing on

"VISITOR", 2 points scored display on “VISITOR”.

5 second countdown, until next player’s turn, when one

player finishes game.

Player with most points scored wins ( LED will flash on

player with higher score).

Press "PLAY" to restart this game.

8. One on One

Press "PLAY" to enter game 8.

Press "UP/Down" to select single/multiple players

(P1/P2/P3/P4).

Press "PLAY" after the number of players is selected.

Press "UP/Down" to select playing time, 30/45/60 seconds.

Press "PLAY" to begin the game.

Scoreboard "HOME" displays Players 1 and 3,

"VISITOR" displays Players 2 and 4.

All shots worth 2 points until last 10 seconds, then each

score counts 3 points. Countdown 5 seconds to next

player's turn when one player finishes game. Player with

most points scored wins ( LED will flash on player with

higher score).

Press "PLAY" to restart this game.

CHOOSE FROM 8 DIFFERENT GAME OPTIONS

17

CONGRATULATIONS!

18

CARE AND USE

1. This product is intended for INDOOR use only.

2. Do NOT sit, climb or lean on the table.

3. Do NOT drag the table when moving it as this will damage the legs.

You have now assembled your Basketball Game.

Please note the Care and Use instructions below to

ensure years of trouble free use of your game table.

180-DAY LIMITED WARRANTY

19

This product is warranted to the original purchaser to be free from defects in material or workmanship

for a period of 180 days from the date of the original retail purchase.

This warranty does not cover defects or damage due to improper installation, alteration, accident or

any other event beyond the control of the manufacturer. Defects or damage resulting from misuse,

abuse or negligence will void this warranty. This warranty does not cover scratching or damage that

may result from normal usage.

This product is not intended for institutional or commercial use; the manufacturer does not assume

any liability for such use. Institutional or commercial use will void this warranty.

This warranty is nontransferable and is expressly limited to the repair or replacement of the defective

product. During the warranty period, the manufacturer shall repair or replace defective parts at no

cost to the purchaser. Shipping charges and insurance are not covered and are the responsibility of

the purchaser. Labor charges and related expenses for removal, installation or replacement of the

product or components are not covered under this warranty.

The manufacturer reserves the right to make substitutions to warranty claims if parts are unavailable

or obsolete.

The manufacturer shall not be liable for loss of use of the product or other consequential or incidental

costs, expenses or damages incurred by the consumer of any other use. The user assumes all risk of

injury resulting from the use of this product.

This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of

. Neither the manufac-

turer nor any of its representatives assumes any other liability in connection with this product.

All warranty claims must be made through the retailer where the product was originally

purchased. A purchase receipt or other proof of date of purchase will be required to process

all warranty claims. The model number and part numbers found within the assembly

instructions will be required when submitting any parts requests or warranty claims.

For further warranty information or inquiries, please call 800-759-0977

JEU DE BASKET-BALL

ÉLECTRONIQUE DOUBLE SURE SHOT

INSTRUCTIONS D’ASSEMBLAGE

NG2233BL

Contactez

notre

service à la clientèle au

800-759-0977

avec des questions sur le montage

ou l'utilisation de ce produit.

La page charge ...

Bluewave BG2233 Mode d'emploi

Ce manuel convient également à

Bluewave BG2233 Mode d'emploi

dans d''autres langues

Autres documents