Bluewave NG2233BL Mode d'emploi

NG2233BL
Marque
Bluewave
Modèle
NG2233BL
Taper
Mode d'emploi

Ce manuel convient également à

SURE SHOT DUAL ELECTRONIC
BASKETBALL GAME
ASSEMBLY INSTRUCTIONS
NG2233BL
Please Do Not Hesitate to
Contact Our Consumer Hotline
at
800-759-0977
with Any Questions That May
Arise During Assembly or
Use of This Product!
THANK YOU!
Thank you for purchasing this product.
We work around the clock and around the globe to ensure that our products
maintain the highest possible quality. However, in the rare case of issues
during assembly or use of this product, please contact our Consumer Hotline
at 800-759-0977 for immediate assistance before contacting your retailer.
Please read the warranty information at the back of these assembly
instructions for further details.
IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS
IN ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.
2
PARTS IDENTIFIER (NOT TO SCALE)
3
HOME
VISITOR
TIME
9
10 11
12
13 14 15
16
Switch Sensor Control Box with Wire Electronic Scorer
2 3 4
x2 x2 x1 x1
6 7 85
x1 x2 x2
x2 x2 x1 x2
x4 x1 x2 x1
x1
Rim
18 19 20
Inflation Pump with NeedleRim Support Plate
x2 x1
21
Backboard
x1
M6 Washer
22
x64
M6 x 20mm Bolt
23
x16
M6 x 30mm Bolt
24
x6
25
M6 x 42mm Bolt
x4
M6 x 48mm Bolt
26
x4
M6 x 35mm Bolt
27
x2
M6 Nut
28
x32
29
3.5 x 10mm Bolt
x4
4 x 28mm Bolt
x2
Electronic Scorer Face Plate
30
x1
Basketball
7" Dia.
31
Wrench
32
x1
17
x2
End Cap
x2
Tube 1
Ø22x580x440mm
Tube 2
Ø22x685mm
Tube 3
Ø22x890mm
Tube 4
Ø22x890mm
Tube 7
Ø22x830mm
Tube 8
Ø22x835mm
Ø12.7x1070mm
Ø22x740mm
Tube 5
Ø22x755x580mm
Tube 6
Ø22x755x580mm
Ø22x540x385mm
Ø22x1065x520mm
1
NGP6020
NGP6034
NGP6023
NGP6033
NGP6024
NGP6022
NGP6027
NGP6021
NGP6028
NGP6026
NGP6031
NGP6025
NGP2217
NGP6030
NGP6035
NGP6029
NGP6036 NGP6038 NGP6039NGP6037
NGP6040 NGP6041* NGP6041*NGP6041*
NGP6041* NGP6041* NGP6041*NGP6041*
NGP6041* NGP6042 NGP6041*NGP6041*
Tube 11
Tube 12
Tube 9 Tube 10
*Items included in Hardware Pack, NGP6041 6/15 For replacement parts please call 800-759-0977.
PARTS IDENTIFIER (NOT TO SCALE)
4
For replacement parts please call 800-759-0977.
33
Allen Key
x1
34
Ball Return Net
x1
35
Lock Pin
Net
Spring Lock
Plastic Pole Insert
A1 A2
x2 x2
Self-Stick Strap
x2
x9
x2
A3
A4
PRE-INSTALLED PARTS
Power Tools
- Set Low Torque
High Torque
over tightened
X 2
Strong Adults Needed No Children in
Assembly Area
Keep away from pets Do not use or keep product
outdoors. For indoor use only.
No wet/humid conditions.
TOOLS REQUIRED
• Phillips Screwdriver - Not included
• Standard (Flat Head) Screwdriver - Not included
• Allen Wrench - Included
Electric Screwdrivers may be helpful during assembly;
however, please set a low torque and use extreme caution.
CAUTION!
NGP6043 NGP6044NGP6041*
*Items included in Hardware Pack, NGP6041
5/14
ASSEMBLY TIPS
5
1. Find a clean, level surface to begin the assembly of your basketball game. We recommend
that two adults work together to assemble this game. You may want to carefully cut or tear
the four corners of the box so that the bottom of the box can be used as your work surface.
2. Remove all of the contents from box and verify that you have all of the parts shown on
Note: Some parts may be pre-installed
or pre-assembled.
understand the text before beginning each assembly step.
4. When installing parts that have more than one screw or bolt, hand tighten all
5. Electric screwdrivers may be helpful during assembly; however, please set a low torque
and use extreme caution because screws may be stripped or overtightened, resulting in
damaged parts, if the electric screwdriver’s torque is set too high.
WARNINGS!
READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETY INSTRUCTIONS CAREFULLY.
CHOKE HAZARD - THIS TABLE CONTAINS SMALL BALLS AND PARTS
NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.
THANK YOU!
6
ASSEMBLY INSTRUCTIONS
FIG. 1 & 2
1. Attach Tubes 2 (#2) to Tube 3 and Tube 4 (#3 & #4) using spring lock (pre-installed) as shown in FIG.1.
2. Attach Tubes 7 (#7) to Tubes 8 (#8) using spring lock (pre-installed) as shown in FIG.2
2
2
2
3
3
4
4
7
8
X 2
X 1
X 1
X 2
X 2
FIG. 1
FIG. 2
Punched hole
7
8
A2
Spring Lock
A2
Spring Lock
FIG. 3
A2
Spring Lock
5
6
5
6
X 1
X 1
FIG. 3
3. Attach Tube 5 and Tube 6 (#5 & #6) together using spring lock (pre-installed) as shown in FIG.3.
FIG. 4
4. Attach Tube 5 and Tube 6 (#5 & #6) to Tube 3 and Tube 4 (#3 & #4) using Bolts (#26), Washers (#22) and Nuts (#28),
and then attach Tube 5 and Tube 6 (#5 & #6) to Tubes 8 (#8) using Bolts (#26), Washers (#22) and Nuts (#28) as shown
in FIG. 4, 4A and 4B.
5. Attach Tubes 7 and Tubes 8 (#7 & #8) to Tube 2 (#2) using Bolt (#24), Washers (#22) and Nuts (#28) as shown in
FIG. 4C, repeat this step for other side. NOTE: Make sure the spring lock is facing down.
ASSEMBLY INSTRUCTIONS (CONT.)
7
22
24
26
28
X 12
X 2
X 4
X 6
FIG. 4
5
3
4
2
8
8
6
7
7
2
FIG. 4A
26
28
22
22
FIG. 4B
22
26
22
28
FIG. 4C
22
22
28
24
FIG. 5
6. Attach Tube 12 (#12) to Tubes 2 (#2) using Bolts (#24), Washers
(#22) and Nuts (#28) as shown in Fig. 5A, and then insert Tubes 1
(#1) onto Tubes 2 (#2) as shown in FIG. 5.
7. Attach Tubes 9 (#9) to Tube 5 and Tube 6 (#5 & #6) using Bolt (#27),
Washers (#22) and Nuts (#28) as shown in FIG. 5 and 5B
ASSEMBLY INSTRUCTIONS (CONT.)
8
1
9
12
22
24
27
X 2
X 2
X 1
X 8
X 2
X 2
28
X 4
FIG. 5
1
FIG. 5A
12
12
2
2
1
1
2
24
28
22
22
9
5
6
9
28
22
22
27
FIG. 5B
A3
FIG. 6
8. Attach Tubes 10 (#10) to Tubes 9 (#9) using
spring locks (pre-installed), and then insert Tube 11 (#11)
onto Tubes 10 (#10) using spring locks (pre-installed) as shown in FIG. 6.
ASSEMBLY INSTRUCTIONS (CONT.)
9
10
FIG. 6
9
9
Long
Short
10
10
X 2
11
X 1
11
10
11
A2
Spring Lock
A2
Spring Lock
THANK YOU!
10
ASSEMBLY INSTRUCTIONS (CONT.)
FIG. 7
9. Attach Rims (#17) and Rim Support Plates (#18) to the Backboard (#21) using the Bolts (#23), Washers (#22) and
Nuts (#28). Attach the Switch Sensors (#15) to the Backboard (#21) using the Bolts (#23), Washers (#22) and Nuts (#28).
NOTE: Make sure that you use washer on both sides of the backboard as shown in FIG. 7.
FIG. 8
10. Attach the Electronic Scorer Face Plate (#31) to the front of Backboard and connect with the Electronic Scorer (#14)
using Bolts (#29) as shown in FIG. 8.
FIG. 7
28
15
15
17
17
22
22
23
23
28
22
22
18
18
21
15
17
18
21
22
23
28
X 2
X 2
X 2
X 1
X 32
X 16
X 16
FIG. 8
TIME
VISITOR
HOME
29
14
31
14
29
31
X 1
X 4
X 1
HOME
VISITOR
TIME
FIG. 9
11. Slide elastic straps and sleeve of Ball Return Net (#35) onto Top Tubes 1 (#1) as shown in FIG. 9A & 9B.
12. Slide Tube 12 (#12) through the sleeve on the front of the Ball Return Net (#35), attach the left side first using
Bolts (#24), Washers (#22) and Nuts (#28) as shown in FIG. 9C. Follow the same procedure on the right side.
ASSEMBLY INSTRUCTIONS (CONT.)
11
X 1
X 4
X 2
X 2
12
12
12
X 1
35
35
35
22
22
22
22
22
24
24
24
24
28
28
28
28
11
11
12
FIG.9
FIG.9A
FIG.9B
FIG.9C
A4
Lock Pin
FIG. 10
13. With the help of another adult, attach the Backboard (#21) to Top Tubes 1 (#1) using Bolts (#25), Washers (#22),
Nuts (#28) and End Caps (#20) as shown in FIG.10A. At each bottom hole of the backboard, attach the ramp tabs of
Ball Return Net (#35) using Bolts (#25), Washers (#22), Nuts (#28) as shown in FIG.10B.
14. Connect the Lock Pins (#A4) to Tube 5 andTube 6 (#5 & #6) and insert them into Tube 5 and Tube 6 (#5 & #6) as
shown in FIG.10C.
ASSEMBLY INSTRUCTIONS (CONT.)
12
FIG. 10
35
12
21
25 22
22
1
20
28
FIG. 10A
Ramp Tab
21
25
34
22
22
1
2
28
FIG. 10B
FIG. 10C
A1
X 8
X 4
X 4
22
25
28
X 2
20
A4
Lock Pin
FIG. 11
15. Attach the Control Box (#16) to the middle of Tube 11 (#11) using two Bolts (#30) as shown in FIG.11A.
16. Run the rest of the Control Wire through the loops on the bottom side of the Ball Return Net (#35). Hold the Control
Wire on Tube 11 (#11) using the Self-Stick Straps (#34) as shown in FIG.11.
ASSEMBLY INSTRUCTIONS (CONT.)
13
Control Wire
X1
16
X2
30
X2
34
FIG.11
11
16
34
30
11
35
FIG. 12
14
Sensor Wire
Sensor Wire
Electronic Scorer
Control Wire
FIG. 12A
ON / OFF
CONTROL
WIRE /
CONTROL
CABLE
VISITOR
FIG. 12
17. Connect the Sensor Wire from Switch Sensor (#15) to the Electronic Scorer (#14) as shown in FIG.12.
Connect the Control Wire to the Electronic Scorer (#14) as shown in FIG.12 and 12A.
FIG.11A
FIG. 13
18. To fold game up when not in use, remove Lock Pins (#A4), fold the front of the basketball game up and re-insert
Lock Pins (#A4) as shown in FIG.13. Note: The Lock Pins need to be removed before folding closed or open.
ASSEMBLY INSTRUCTIONS (CONT.)
14
FIG. 13
IMPORTANT!
Make sure to use the
Lock Pin (#A4) when folded.
A4
Lock Pin
ON / OFF
CONTROL
WIRE /
CONTROL
CABLE
VISITOR
ELECTRONIC SCORER OPERATION
Installing Batteries:
Using a screwdriver, unscrew lid and open the
battery box. Insert 3 “AA” batteries ( not included)
in the order of polarity as shown on the inside
cover. Close the cover and tighten screw.
Turn the power ON using the ON/OFF switch.
Reminders:
• Batteries must be installed according to the
correct polarization (+ and -) requirement.
• Please clean the battery contacts, and also those
of the device, prior to battery installation.
• If the game will not be used for a long period of time,
we recommend that the batteries should be removed.
ASSEMBLY INSTRUCTIONS (CONT.)
15
WARNING:
!
1) Requires 3 “AA” batteries (not included).
2) Do not mix old and new batteries.
3) Do not mix alkaline, standard (carbon zinc), or
rechangeable (nickel-cadmium) batteries.
ON/OFF
PLAY
SELECT
UP
SELECT
DOWN
SOUND
PAUSE
RESET
CONTROL PANEL
CONTROL BOX OPERATION
Press "ON/OFF" to activate the scorer.
Scoreboard "HOME" shows "01" (pre- set game 1).
Press "SELECT UP and DOWN" to select a game.
Press "PLAY" to enter selected game mode.
Press "SOUND" to switch sound ON/OFF while playing.
Press "PAUSE" to pause or start time counting.
Press and hold the button "ON/OFF" 3 seconds to turn off scorer.
Press and hold the button "RESET" 3 seconds to reset the games.
NOTE: If no shot is made or no button is pressed in 15 mins,
scorer will be turned off automatically.
1. Beat the Clock
Press "PLAY" to enter game 1.
Press "UP/Down" to select single/multiple players
(P1/P2/P3/P4).
Press "PLAY" after the number of players is selected.
Press "UP/Down" to select playing time, 30/45/60 seconds.
Press "PLAY" to begin the game.
Scoreboard "HOME" shows Player 1, 3;
Scoreboard "VISITOR" shows Player 2, 4.
All shots worth 2 points until last 10 seconds, then each
score counts 3 points. Countdown 5 seconds to next
player's turn when one player finishes game. Player with
most points scored wins ( LED will flash on player with
higher score).
Press "PLAY" to restart this game.
2. 3 Point Beat the Clock
Press "PLAY" to enter game 2.
Press "UP/Down" to select single/multiple players
(P1/P2/P3/P4).
Press "PLAY" after the number of players is selected.
Press "UP/Down" to select playing time, 30/45/60 seconds.
Press "PLAY" to begin the game.
Scoreboard "HOME" shows Player 1, 3;
Scoreboard "VISITOR" shows Player 2, 4.
All shots made count 3. Countdown 5 seconds to next
player's turn when one player finishes game. Player with
most points scored wins ( LED will flash on player with
higher score).
Press "PLAY" to restart this game.
3. Battle Back
Press "PLAY" to enter game 3.
Press "UP/Down" to select multiple players (P2/P4).
Press "PLAY" to begin the game.
Shot made in "HOME" frame, +2 points scored display on
"HOME" board and -2 points for "VISITOR".
Shot made in "VISITOR" frame, +2 points scored display
on "VISITOR" board and -2 points for "HOME".
Once a player scores 10 points they win and game
is finished.
Press "PLAY" to restart this game.
4. Horse
Press "PLAY" to enter game 4.
Press "UP/Down" to select multiple players (P2/P3/P4).
CHOOSE FROM 8 DIFFERENT GAME OPTIONS
16
Press "PLAY" after the number of players is selected.
Player has to make a shot in 2 seconds.
First player is allowed to shoot at any hoop (HOME or
VISITOR). If first player scores in 2 seconds, no letter is
given. Game continues for next player. Scoreboard will
display "next player (P2P3/P4)" and LED will flash twice
in a second. After flash, next player has to duplicate the
shot in the same hoop selected by first player.
If player can't score in 2 seconds, player receives the first
letter "H" which will display on scoreaboard. Game remains
for the same player untill the player scores. If player keeps
missing, player receives "O" followed by "R", "S", "E".
After the letter "E" is given, the player is out.
The first player to spell "horse" is out. Play continues until
last player to spell “horse” wins.
Press "PLAY" to restart this game.
5. Check Point
Press "PLAY" to enter game 5.
Press "UP/Down" to select single/multiple players
(P1/P2/P3/P4).
Press "PLAY" after the number of players is selected.
"HOME" displays "player", "VISITOR" displays "24" points,
pre-set 40 seconds playing time.
Points scored will display on scoreboard "HOME".
Before time is out, once 24/52/68/86 points is scored,
playing time increases 10/20/10/20 seconds respectively.
Countdown 5 seconds to next player's turn when one
player finishes game.
Player with most points scored wins ( LED will flash on
player with higher score).
Game is finished when a player scores 98 points.
Press "PLAY" to restart this game.
6. Around the World
Use tape to mark shooting lines.
Press "PLAY" to enter game 6.
Press "UP/Down" to select single/multiple players
(P1/P2/P3/P4).
Press "PLAY" after the number of players is selected.
"HOME" scoreboard displays Player 1/2/3/4, "VISITOR"
displays points scored.
Once score reaches 10 points or time reaches 99 seconds,
5 second countdown, until next player’s turn, when one
player finishes game.
Player who finishes the game first wins (LED will flash
on winner).
Press "PLAY" to restart this game.
7. Left and Right Shoot
Press "PLAY" to enter game 7.
Press "UP/Down" to select single/multiple players
(P1/P2/P3/P4).
Press "PLAY" after the number of players is selected.
Press "UP/Down" to select playing time, 30/45/60 seconds.
Press "PLAY" to begin the game.
Scoreboard "HOME" displays Player,
"VISITOR" displays points
Make a shot in "HOME" frame when LED is flasing on
"HOME", 2 points scored display on “HOME”.
Make a shot in "VISITOR" frame when LED is flasing on
"VISITOR", 2 points scored display on “VISITOR”.
5 second countdown, until next player’s turn, when one
player finishes game.
Player with most points scored wins ( LED will flash on
player with higher score).
Press "PLAY" to restart this game.
8. One on One
Press "PLAY" to enter game 8.
Press "UP/Down" to select single/multiple players
(P1/P2/P3/P4).
Press "PLAY" after the number of players is selected.
Press "UP/Down" to select playing time, 30/45/60 seconds.
Press "PLAY" to begin the game.
Scoreboard "HOME" displays Players 1 and 3,
"VISITOR" displays Players 2 and 4.
All shots worth 2 points until last 10 seconds, then each
score counts 3 points. Countdown 5 seconds to next
player's turn when one player finishes game. Player with
most points scored wins ( LED will flash on player with
higher score).
Press "PLAY" to restart this game.
CHOOSE FROM 8 DIFFERENT GAME OPTIONS
17
CONGRATULATIONS!
18
CARE AND USE
1. This product is intended for INDOOR use only.
2. Do NOT sit, climb or lean on the table.
3. Do NOT drag the table when moving it as this will damage the legs.
You have now assembled your Basketball Game.
Please note the Care and Use instructions below to
ensure years of trouble free use of your game table.
180-DAY LIMITED WARRANTY
19
This product is warranted to the original purchaser to be free from defects in material or workmanship
for a period of 180 days from the date of the original retail purchase.
This warranty does not cover defects or damage due to improper installation, alteration, accident or
any other event beyond the control of the manufacturer. Defects or damage resulting from misuse,
abuse or negligence will void this warranty. This warranty does not cover scratching or damage that
may result from normal usage.
This product is not intended for institutional or commercial use; the manufacturer does not assume
any liability for such use. Institutional or commercial use will void this warranty.
This warranty is nontransferable and is expressly limited to the repair or replacement of the defective
product. During the warranty period, the manufacturer shall repair or replace defective parts at no
cost to the purchaser. Shipping charges and insurance are not covered and are the responsibility of
the purchaser. Labor charges and related expenses for removal, installation or replacement of the
product or components are not covered under this warranty.
The manufacturer reserves the right to make substitutions to warranty claims if parts are unavailable
or obsolete.
The manufacturer shall not be liable for loss of use of the product or other consequential or incidental
costs, expenses or damages incurred by the consumer of any other use. The user assumes all risk of
injury resulting from the use of this product.
This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of
. Neither the manufac-
turer nor any of its representatives assumes any other liability in connection with this product.
All warranty claims must be made through the retailer where the product was originally
purchased. A purchase receipt or other proof of date of purchase will be required to process
all warranty claims. The model number and part numbers found within the assembly
instructions will be required when submitting any parts requests or warranty claims.
For further warranty information or inquiries, please call 800-759-0977
JEU DE BASKET-BALL
ÉLECTRONIQUE DOUBLE SURE SHOT
INSTRUCTIONS D’ASSEMBLAGE
NG2233BL
Contactez
notre
service à la clientèle au
800-759-0977
avec des questions sur le montage
ou l'utilisation de ce produit.
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38

Bluewave NG2233BL Mode d'emploi

NG2233BL
Marque
Bluewave
Modèle
NG2233BL
Taper
Mode d'emploi
Ce manuel convient également à
Télécharger le PDF
rapport

dans d''autres langues

Autres documents