Samsung MXHS9000 Manuel utilisateur

Catégorie
Lecteur CD
Taper
Manuel utilisateur
PREMIUM HI-FI Component System
user manual
MX-HS9000
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
02687L-01-MX-HS9000-ZC-ENG.indd 1 2014-03-20 오후 12:16:29
Safety Information
• An administration fee may be charged if either
an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user's manual).
you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user's manual).
• The amount of such administration charge will be advised to you before any work or home visit is
carried out.
2 English
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important
instructions accompanying the product.
WARNING
• To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS
1 LASER product. Use of controls, adjustments
or performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
Complies with 21CFR 1040.10 except for
deviations pursuant to Laser Notice No. 50, dated
June 24, 2007.
DANGER :
• VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO
BEAM. (FDA 21 CFR)
CAUTION :
• CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID EXPOSURE
TO THE BEAM. (IEC 60825-1)
• THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVER AND DO
NOT REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1
02687L-01-MX-HS9000-ZC-ENG.indd 2 2014-03-20 오후 12:16:29
01 Safety Information
3 English
Important Safety Instructions
Read these operating instructions carefully before
using the unit. Follow all the safety instructions
listed below. Keep these operating instructions
handy for future reference.
1. Read these instructions.
2. Keep these Instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or groundingtype plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11. Only use attachment/accessories specified
by the manufacturer.
12. Use only with the cart,
stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus.
When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or plug
is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Precautions
• Ensure that the AC power supply in your house
complies with the identification sticker located
on the back of your product.
• Install your product horizontally, on a suitable
base (furniture), with enough space around it for
ventilation (3 - 4 inches/7.5 - 10 cm).
• Do not place the product on amplifiers or other
equipment which may become hot. Make sure
the ventilation slots are not covered.
• Do not stack anything on top of the product.
• Before moving the product, ensure the Disc
Insert Slot is empty.
• To turn off the product completely, disconnect
the AC plug from the wall outlet. Disconnect the
AC plug from the wall outlet if you will leave the
device unused for a long period of time.
• During thunderstorms, disconnect the AC plug
from the wall outlet. Voltage spikes due to
lightning could damage the product.
• Do not expose the product to direct sunlight
or other heat sources. This could cause the
product to overheat and malfunction.
• Protect the product from moisture, excess heat,
and equipment creating strong magnetic or
electric fields (i.e. speakers.).
• Disconnect the power cable from the AC supply
if the product malfunctions.
• Your product is not intended for industrial use. It
is for personal use only.
02687L-01-MX-HS9000-ZC-ENG.indd 3 2014-03-20 오후 12:16:30
Safety Information
4 English
• Condensation may occur if your product or
disc has been stored in cold temperatures. If
transporting the product during the winter, wait
approximately 2 hours until the product has
reached room temperature before using.
• The batteries used with this product contain
chemicals that are harmful to the environment.
Do not dispose of batteries in the general
household trash.
• Please check the volume level before playing
not to startle the elderly, infirm and pregnant
woman at a sudden loud sound.
• Place the loudspeakers at a reasonable distance
on either side of the system to ensure good
stereo sound.
• Direct the loudspeakers towards the listening
area.
• Do not expose this apparatus to dripping or
splashing. Do not place objects filled with
liquids, such as vases, on the apparatus.
• To turn this apparatus off completely, you must
disconnect it from the wall outlet. Consequently,
the wall outlet and power plug must be readily
accessible at all times.
• Use only a properly grounded plug and
receptacle.
- An improper ground may cause electric shock
or equipment damage. (Class l Equipment
only.)
Disc Storage & Management
• Holding Discs
- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
- Avoid touching the surface of a disc where
data has been recorded.
- Hold the disc by the edges so that fingerprints
will not get on the surface.
- Do not stick paper or tape on the disc.
• Cleaning Discs
- If you get fingerprints or dirt on a
disc, clean it with a mild detergent
diluted in water and wipe with a
soft cloth.
- When cleaning, wipe gently from the inside to
the outside of the disc.
• Disc Storage
`
Do not keep in direct sunlight.
`
Keep in a cool ventilated area.
`
Keep in a clean protection jacket and store
vertically.
Disc and Format Compatibility
This product does not support Secure (DRM)
Media files.
CD-R Discs
• Some CD-R discs may not be playable
depending on the disc recording device (CD-
Recorder or PC) and the condition of the disc.
• Use 650MB/74 minute CD-R discs.
Do not use CD-R discs over 700MB/80 minutes
as they may not be played back.
• Some CD-RW (Rewritable) media may not be
playable.
• Only CD-Rs that are properly "closed" can be
fully played. If the session is closed, but the disc
is left open, you may not be able to fully play the
disc.
02687L-01-MX-HS9000-ZC-ENG.indd 4 2014-03-20 오후 12:16:31
01 Safety Information
5 English
MP3-CD Discs
• Only CD-R discs with MP3 files in ISO 9660 or
Joliet format can be played.
• MP3 file names should contain no blank spaces
or special characters (. / = +).
• Use discs recorded with a compression/
decompression data rate greater than 128Kbps.
• Only a consecutively written multisession disc
can be played. If there is a blank segment in the
Multisession disc, the disc can be played only
up to the blank segment.
• If the disc is not closed, it will take longer to
begin playback and not all of the recorded files
may play.
• For files encoded in the Variable Bit Rate (VBR)
format,( i.e. files encoded in both low bit rate
and high bit rate - 32Kbps ~ 320Kbps), the
sound may skip during playback.
• A maximum of 999 files can be played per CD.
Supported Audio Formats
File
Extension
Audio
Codec
Sampling
Rate
Bit Rate
*.mp3
MPEG 1 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
MPEG 2 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
MPEG 2.5 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
*.wma
Wave_Format_
MSAudio1
16KHz ~
48KHz
56Kbps ~
128Kbps
Wave_Format_
MSAudio2
16KHz ~
48KHz
56Kbps ~
128Kbps
| NOTES |
Does not support WMA Professional codec.
The above table shows supported sampling
rates and bit rates. Files of not supported
formats may not be played properly.
02687L-01-MX-HS9000-ZC-ENG.indd 5 2014-03-20 오후 12:16:31
Contents
6 English
SAFETY INFORMATION
2 Warning
3 Precautions
4 Disc Storage & Management
4 Disc and Format Compatibility
5 Supported Audio Formats
GETTING STARTED
7 Front Panel
8 Rear Panel
9 Remote Control
10 Accessories
10 Connecting the Speakers
10 Attaching the speaker foot
FUNCTIONS
11 The Display function
11 Changing Display mode
11 The DEMO Music function
11 Playing a CD
11 Loading a Compact Disc
11 CD/MP3/CD-R Playback
12 Selecting a Track
12 Searching for a Specific Music Passage on
a CD
12 Repeat One or All Tracks on a CD
13 Playing USB Devices
13 USB Device Playback
13 To Select a File from a USB Device
14 To Use High Speed Search
14 To Delete a File
14 To Move to the Next/Previous Folder
14 To safely remove a USB device
14 Read Before Connecting USB Storage
Devices
15 Searching for a Track Quickly
15 Using the Program Function
15 Viewing or Editing Programmed Tracks
16 Bluetooth
16 What is Bluetooth?
16 To connect the Hi-Fi Component to a
Bluetooth device
17 To disconnect the Bluetooth device from
the Hi-Fi Component
17 To disconnect the Hi-Fi Component from
the Bluetooth device
17 Using Bluetooth Power On
18 TV SoundConnect
18 To connect the Hi-Fi Component to a
SoundConnect Compatible Samsung TV
18 To disconnect the TV from the Hi-Fi
Component
18 To disconnect the Hi-Fi Component from
the TV
19 Using My Karaoke
19 Auto Change Function
19 Listening to the Radio
19 To Store the Stations You Want
20 Selecting a Stored Station
20 Timer Function
20 Setting the Clock
20 Setting the Timer
22 Cancelling the Timer
22 The Recording Function
22 Basic Recording
23 Recording Speed
24 Special Sound Effects
24 Selecting EQ Mode
24 FOOTBALL MODE function
24 GOAL Function
25 GIGA SOUND Function
25 BEAT WAVING Function
25 DJ BEAT Function
26 +PANNING Funcion
26 NON-STOP MUSIC RELAY Function
26 DANCE TIME Function
26 TEMPO Function
26 Booting Sound Function
APPENDIX
27 Troubleshooting
28 Specifications
02687L-01-MX-HS9000-ZC-ENG.indd 6 2014-03-20 오후 12:16:32
02 Getting Started
Getting Started
Front Panel
1
Display Panel
2
FORWARD SEARCH/SKIP button
3
PLAY/PAUSE button
4
TUNER/AUX button
5
EQ button
6
BEAT WAVING button
7
TV SOUNDCONNECT button
8
POWER button
• Press this button to switch your product
on or off.
9
Eject button for Disc
0
SEARCH button
!
VOLUME/SEARCH JOG
@
ENTER button
#
PROGRAM button
$
DISC slot
%
REMOTE CONTROL SENSOR
^
CD/ Bluetooth button
&
STOP button
*
BACKWARD SEARCH/SKIP button
(
MIC jack
)
AUX IN 1 jack
Use to connect an external device such as
an MP3 player.
• Connect AUX IN 1 on the front panel
of the product to the Audio Out of an
external device/MP3 player.
• Press the TUNER/AUX button to select
AUX1.
a
USB REC button
b
+PANNING button
c
DJ BEAT button
d
TEMPO button
e
USB 2 jack for Playing and USB Recording
f
USB 1 jack for Playback only.
g
USB button
h
NON-STOP MUSIC RELAY button
i
DANCE TIME button
j
DJ JOG
k
FOOTBALL MODE button
l
GIGA SOUND BEAT button
m
DISPLAY / DEMO button
ij 5b 6^ 1 43&c * 2
7
9
8l
m
h
k
0#% $) (daefg @ !
7 English
02687L-01-MX-HS9000-ZC-ENG.indd 7 2014-03-20 오후 12:16:33
Getting Started
Rear Panel
1
FM Antenna Terminals
1. Connect the FM antenna to the FM
antenna connector terminal.
2.
Slowly move the antenna wire until you find
a location where reception is good, then
fasten it to a wall or other rigid surface.
3.
If reception is poor, you may need to
install an outdoor antenna. To do so,
connect an outdoor FM antenna to the
FM socket on the rear of the system
using a 75Ω coaxial cable (not supplied).
2
ONLY FOR SERVICE
• This jack is for testing only. Please do
not use.
3
AUX IN 2 Terminals
1.
Use an Audio Cable (not supplied) to
connect AUX IN 2 on the product to Audio
Out on an external analog output device.
• Be sure to match connector colors.
• If the external analog output device has
only one Audio Out jack, connect either
left or right.
• Press the TUNER/AUX button to select
AUX 2.
• If the product is in AUX mode for more
than eight hours and no buttons on the
front panel or remote are pushed, the
system will turn off.
4
LED Terminals for Speaker Beat
Waving.
5
2.2 CH Speaker Terminals
1. To achieve the correct sound quality,
when you connect the speakers, match
the color of the speaker plugs to the
color of the speaker jacks. See below.
• LEFT channel (marked
, White/Purple).
• RIGHT channel (marked
, Red/Purple).
• Don't force the Purple SUBWOOFER
connector into the White or Red speaker
jack.
6
Cooling fan
• The fan operates while the unit is
powered on.
If you set the unit to the minimum
volume, the fan won't operate.
Secure a minimum 6 inches (15 cm) of
clear space on all sides of the fan when
installing the product.
7
POWER
• Insert only the provided power cable.
23 4 5 6 7
1
8 English
02687L-01-MX-HS9000-ZC-ENG.indd 8 2014-03-20 오후 12:16:33
02 Getting Started
Installing Batteries In The Remote Control
• Place batteries in the remote control so they
match the polarity of the illustrations in the
battery compartment. : (+) to (+) and (–) to (–).
• Do not dispose of batteries in a fire.
• Do not short circuit, disassemble, or overheat
the batteries.
• There is a danger of explosion if the battery is
replaced with the wrong battery type.
• The remote control can be used up to
approximately 23 feet (7 meters) in a straight
line from the system.
Remote Control
Power
Bluetooth
TUNING MODE
PLAY/PAUSE
TIMER SET
MY KARAOKE
CD
USB
TUNER/AUX
NON-STOP MUSIC RELAY
TEMPO
STOP
FOOTBALL
EQ
PROGRAM
TIMER ON/OFF
DISPLAY
MIC VOLUME –, +
AUTO CHANGE
BEAT WAVING
TV SoundConnect
REC SPEED
MO/ST
DJ BEAT
EFFECT LEVEL
REPEAT
GOAL
DANCE TIME
DELETE
SLEEP (Set a sleep time to shut off the
product.)
TUNING/ALBUM
,
,
.
SEARCH
USB REC
+PANNING
GIGA SOUND BEAT
MUTE (Turn off the sound temporarily. Press
again to turn the sound back on.)
SKIP
VOLUME (–, +)
9 English
02687L-01-MX-HS9000-ZC-ENG.indd 9 2014-03-20 오후 12:16:34
Getting Started
Accessories
Check for the supplied accessories below.
User Manual Remote Control / Batteries FM Antenna
Power Cable Rubber Foot (4ea)
• Figures and illustrations in this user's manual are provided for reference only and may differ from actual
product appearance.
Connecting the Speakers
Recommended speaker setup.
| IMPORTANT |
The product may not operate properly if it is
subject to shaking or external shocks or if the
speakers are not installed as recommended.
Do not stretch the speaker wires or place a heavy
object on them.
Attaching the speaker foot
Attach the supplied speaker feet to the bottom rear corners of
each speaker as shown in the illustration to stabilize the speakers
and prevent them from slipping.
10 English
Rubber Foot
02687L-01-MX-HS9000-ZC-ENG.indd 10 2014-03-20 오후 12:16:36
03 Functions
Functions
The Display function
You can view functions available on the
display, adjust the brightness of the display
and set the Display/LED either on or off.
Changing Display mode
Press the DISPLAY/DEMO button on the product.
Each time you press this button, the mode will
change as follows:
• The Dimmer function
The Dimmer function is selected and the display
darkens.
• LED OFF
The Front display LED is turned off while the
dimmer function is working.
• Clock ON
The Clock you set is displayed.
• Display/LED ON
All displays and the LED are turned on.
The DEMO Music function
Press the DISPLAY/DEMO button on the product
or the DISPLAY button on the remote control for
5 seconds to start the Demo mode.
Each time you press either of these buttons, the
mode will change as follows:
DIMMER
;
LED Off (unit/speaker)
;
--:-- [time
display]
;
LED On (unit/speaker)
To cancel the Demo Music mode
• Press the DISPLAY/DEMO button on the
product or DISPLAY button on the remote
control again for 5 seconds.
The DEMO mode is cancelled and the product
turns off.
• Press TUNER/AUX, CD/Bluetooth, or USB
button on the product.
The DEMO mode is cancelled and the mode is
changed to the mode you selected.
| NOTES |
When the DEMO music function is on, only the
POWER (
), VOL, MUTE ( ) buttons and
the buttons mentioned above work.
The DEMO sampler plays for 3 minutes; only
the message remains displayed on the front
panel after its playback.
Playing a CD
Loading a Compact Disc
You can play standard compact discs that
require no adapter.
1. Insert a disc gently into the disc slot with the
disc's label facing up. The disc will be played
automatically.
• You can load or unload compact discs
when the radio, USB, or auxiliary source
function is selected. When you press the
8
button, all the other functions will
change to the CD mode.
• If no buttons are pressed on the product
or remote control for more than 3 minutes
when the product is in Pause mode, it will
change to Stop mode.
• If no buttons are pressed on the product
or remote control for more than 25 minutes
when the product is in Stop mode, the
product will turn off.
CD/MP3/CD-R Playback
| IMPORTANT |
This product is designed to play the following
audio disc types: CD, CD-R, CD-RW.
1. Insert a disc gently into the disc slot with the
disc's label facing up.
2. The disc is played automatically.
• For MP3/WMA file, it may take several
minutes for the product to finish scanning
the disc tracks.
• If you play a file with an English title, the
song title will be shown in the display. (Titles
in other languages can not be displayed.)
• An English-titled track containing a
special character (@, $, *, etc.) will not be
displayed.
<CD Playback Display>
Track Indicator
Playtime
Indicator
11 English
02687L-01-MX-HS9000-ZC-ENG.indd 11 2014-03-20 오후 12:16:37
Functions
3. To adjust the volume:
• Turn the VOLUME control on the product.
• Press the VOL+ or VOL- button on the
remote control.
The volume level can be adjusted in 31
steps (VOLUME MIN, VOLUME 01 ~
VOLUME 29, and VOLUME MAX).
4. PAUSING PLAYBACK
Main Unit
To pause playback temporarily, press the
button.
Press again to continue playing the disc.
Remote control
To pause playback temporarily, press the
button.
Press the button to continue playing the
disc.
5. To end playing, press the
5
button.
| NOTES |
If no CD is in the disc slot, “NO DISC” appears
on the display.
The quality of MP3/CD-R playback may vary
depending on the condition of the disc or the
condition of the recorder used to create the
disc.
If a disc contains different types of files or
unnecessary folders, you will have problems
with playback.
Gently insert a CD into the disc slot. Do not
apply excessive force.
- Do not apply force to the product or place a
heavy object on the product.
- Do not insert an out-of-spec or oddly
shaped CD (heart shaped, octangular, etc.).
You can damage the product.
- Carefully maintain your CDs.
Selecting a Track
You can select a desired track while the disc is
being played.
To play the previous track
Press the
1
button within 3 seconds after the
current track has started playing.
Press the
1
button twice, 3 seconds or more
after the current track starts playing.
To play the next track
Press the
2
button.
To play the current track from the
beginning
Press the
1
button, 3 seconds after the current
track started playing.
To play the track of your choice
Press the
1
or
2
button to move to a desired
track.
Searching for a Specific Music Passage
on a CD
When listening to a CD, you can quickly search for
a specific music passage on a track.
Forward Search ....................
3
Backward Search .................
4
You can also press and hold the
1
,
2
buttons
on the product to automatically scan for a track.
Repeat One or All Tracks on a CD
You can play a CD or tracks on a CD repeatedly.
1. Press the REPEAT button on the remote
control.
Each time you press this button, the mode
changes as follows:
MP3 : OFF
;
TRACK
;
DIR
;
ALL
;
RANDOM
CD : OFF
;
TRACK
;
ALL
;
RANDOM
12 English
02687L-01-MX-HS9000-ZC-ENG.indd 12 2014-03-20 오후 12:16:38
03 Functions
2. When you want to stop the repeat function,
press the REPEAT button until "OFF" is
displayed.
• OFF : Cancels repeat playback.
• TRACK : Repeatedly plays the selected
track.
• DIR (DIRECTORY) : Repeatedly plays all
tracks in the selected folder.
• ALL : Repeatedly plays the entire disc.
• RANDOM : Plays tracks in random order.
Playing USB Devices
Connect an external storage device such as a
USB flash memory or external HDD (Hard Disk
Drive) to the product. You can play files in MP3/
WMA format.
USB Device Playback
1. Connect the external USB storage device to
your product.
2. Select the USB mode by pressing the USB
button on the product or the USB button on
the remote control.
3. The first file of the first directory plays
automatically.
4. To stop playing
Press the
5
button to stop playing.
| NOTES |
To remove the USB device
- If you press the
5
button again, you can
remove the USB device safely.
| IMPORTANT |
Do not connect a USB recharger to the USB
port of this product. You can damage the
product.
To Select a File from a USB Device
You can select an MP3 file while the product is
playing.
| NOTES |
If you want to move to the previous/next track,
press the
1
,
2
buttons briefly.
- The unit moves to the previous/next track
within the directory.
- If you press the
1
,
2
buttons more times
than the number of the files in the directory,
the unit moves to the next directory.
To repeat
1. Press the REPEAT button.
Each time you press this button, the mode
changes as follows:
OFF
;
TRACK
;
DIR
;
ALL
;
RANDOM
2. When you want to stop the repeat function,
press the REPEAT button until "OFF" is
displayed.
• OFF : Cancels repeat playback.
• TRACK : Repeatedly plays the selected
file.
• DIR (DIRECTORY) : Repeatedly plays all
files in the selected folder.
• ALL : Repeatedly plays all files.
• RANDOM : Plays files in random order.
| NOTES |
If the file selected to be played is located in a
folder all the files within that folder are played
in random order. If the file selected is located in
the root folder all files will be played in random
order.
13 English
02687L-01-MX-HS9000-ZC-ENG.indd 13 2014-03-20 오후 12:16:38
Functions
To Use High Speed Search
You can search a desired section quickly while the
product is playing.
Press the
3
,
4
button.
• Each time you press the button, you move
through the section forward/backward quickly.
| IMPORTANT |
The product does not output sound during a
high speed search.
You can also press and hold the
1
or
2
button on the main unit to automatically scan
for a track.
To Delete a File
You can delete a file from your USB device.
1. Select a file you want to delete.
2. Press the DELETE button on the remote
control. "DELETE NO" is displayed.
3. Press the DELETE button on the remote
control and “DELETE YES” is displayed.
4. Press the
¬
button. “DELETE END
appears and deletion is completed.
To Move to the Next/Previous Folder
Press the TUNING/ALBUM
,
/
.
button on the
remote control to move to the previous/next folder.
| NOTES |
When sound files are stored in the root
directory rather than in a folder, press the
TUNING/ALBUM
,
/
.
button to go to the
first TRACK.
To safely remove a USB device
1. Press the
5
button twice while the USB is
playing or press the
5
button once when
play has stopped.
2. When the REMOVE message appears on the
display, remove the USB device.
Read Before Connecting USB Storage
Devices
• Some USB devices may not work properly with
this product.
• This product only supports external HDD`s that
are formatted in the FAT file system.
• USB 2.0 HDDs should be connected to a
separate power source. Otherwise, the USB 2.0
HDDs will not work.
• If multiple USB external storage are connected
together, only the MP3 files in the first HDD will
be played.
• Files with Digital Rights Management (DRM)
are not supported. DRM restricts unauthorized
access to a DRM file so that file is protected
from piracy.
• Even if a file has an .mp3 extension, the file
cannot be played if it is formatted in MPEG layer
1 or 2.
• Do not use an unrecognized USB hub.
• Only the first 15 characters of an audio file name
are shown on the product's display.
• Only removable HDDs with less than 160GB are
supported. Depending on the device, a 160GB-
or more removable HDD may not be supported.
• It can take several minutes for the product to
recognize the files on some USB devices.
• Some USB devices (USB HDDs, in particular)
may cause a delay when moving from track to
track.
• With USB storage devices supporting USB
VER1.1 only, the product may access files
slowly or may not recognize the file properties.
• The maximum electrical current provided by
each USB port to connected USB devices is
0.5A (based on DC 5V).
• If there is no USB connection or STOP mode
lasts for more than 25 minutes, the product will
automatically turn off.
• Some USB devices, digital cameras, USB card
readers, iPods, iPhones, and Smart Phones
may not be supported.
14 English
02687L-01-MX-HS9000-ZC-ENG.indd 14 2014-03-20 오후 12:16:38
03 Functions
Searching for a Track Quickly
You can select a track directly without the
1
,
2
button.
CDDA/MP3-CD/USB
1. Press the SEARCH button.
After pressing the SEARCH button, turn
the VOLUME/SEARCH JOG control on the
product to the left or right to select a desired
track.
• You can move to the selected track directly.
2. When searching is done, the track will
automatically start playing.
Using the Program Function
This function is not available during playback of an
MP3-CD/USB.
• You can program the playback order of up to 99
tracks of your choice.
• However, you must stop playing the CD/USB
before selecting tracks.
1. While in CD/USB playback mode, press the
5
button to stop playing the CD/USB.
2. Press the PROGRAM button to display the
message below:
PROG 01 TRACK---
(01= program number, ---= track number)
3. Use the
1
or
2
button or the VOLUME/
SEARCH JOG to move to a desired track.
• Press
1
to move to the previous track.
• Press
2
to move to the next track.
4. Press the
¬
button to confirm your
selection. The selection is stored and
is displayed.
5. To select another track, follow Steps 3 and 4
above.
6. Press the
button to play the programmed
tracks.
7. Press the
5
button to stop playing the
programmed tracks, Press the
5
button
again to cancel playing the programmed
tracks.
• If you eject the disc, CD programming is
cancelled.
If you turn off the product, CD/USB
programming is cancelled.
| NOTES |
CD/USB program play will continue if you try to
switch to another mode.
USB REC, DELETE and TUNING/ALBUM
buttons will not work in Program mode. If
you press such buttons in Program mode,
“PROGRAM PLAY” will be displayed instead.
Viewing or Editing Programmed Tracks
You can view and edit a list of programmed tracks.
1. If a programmed track is being played, press
the
5
button once.
2. Press the PROGRAM button twice to display
the message below:
SAVED 01 TRACK002
(01= program number, 002= track number)
3. Repeatedly press the
¬
button until the
desired track is displayed.
4. Press the
1
or
2
button to select a
different track.
5. Press the
¬
button to confirm your
selection.
6. To play the programmed tracks, press the
button.
To repeat
1. Press the REPEAT button.
Each time you press this button, the mode
changes as follows:
OFF
;
TRACK
;
ALL
15 English
02687L-01-MX-HS9000-ZC-ENG.indd 15 2014-03-20 오후 12:16:38
Functions
Bluetooth
You can use a Bluetooth device to enjoy music
with high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth is a technology that enables Bluetooth
compliant devices to interconnect easily with each
other using a short, wireless connection.
• A Bluetooth device may cause noise or
malfunction, depending on usage, when:
- A part of your body is in contact with the
receiving/transmitting system of the Bluetooth
device or the Hi-Fi Component.
- It is subject to electrical variation from
obstructions caused by a wall, corner, or
office partitioning.
- It is exposed to electrical interference from
same frequency-band devices including
medical equipment, microwave ovens, and
wireless LANs.
• Pair the Hi-Fi Component with the Bluetooth
device while they are close together.
• The greater the distance between the Hi-
Fi Component and the Bluetooth device, the
worse the quality. If the distance exceeds the
Bluetooth operational range, the connection is
lost.
• In poor reception areas, the Bluetooth
connection may not work properly.
• The Bluetooth connection only works when
the Bluetooth device and the Hi-Fi Component
are close together. The connection will be
automatically cut off if the Bluetooth device
is out of range. Even within range, the sound
quality may be degraded by obstacles such as
walls or doors.
• This wireless device may cause electric
interference during its operation.
To connect the Hi-Fi Component to a
Bluetooth device
Before you begin, confirm that your Bluetooth
device supports the Bluetooth-compliant stereo
headset function.
1. Press the CD/Bluetooth button of the Hi-
Fi Component to display the BLUETOOTH
message.
• You will see WAIT for a short period of time
and then READY on the front display of the
Hi-Fi Component.
2. Select the Bluetooth menu on the Bluetooth
device you want to connect. (Refer to the
Bluetooth device's user manual.)
3. Select the Stereo headset menu on the
Bluetooth device.
• You will see a list of scanned devices.
4. Select "[Samsung] HI-FI XXXXXX" from the
list.
• When the product is connected to
the Bluetooth device, it will display
CONNECTED
;
BLUETOOTH on the
front display.
• If the Bluetooth device has failed to pair
with the product, delete the previous
“[Samsung] HI-FI XXXXXX” found by the
Bluetooth device and have it search for the
product again.
5. You can listen to the music playing on the
connected Bluetooth device over the Hi-Fi
Component system.
• In Bluetooth mode, some model's Play/
Stop/Next/Back functions are not available.
| NOTES |
The product only supports Middle Quality
SBC data (up to 237kbps@48kHz), and
does not support High Quality SBC data
The AVRCP feature is not supported.
Connect only to a Bluetooth device that
supports the A2DP (AV) function.
You cannot connect to a Bluetooth device that
supports only the HF (Hands Free) function.
16 English
02687L-01-MX-HS9000-ZC-ENG.indd 16 2014-03-20 오후 12:16:38
03 Functions
Only one Bluetooth device can be paired at a
time.
Once you have turned off the Hi-Fi Component
and the pairing is disconnected, the pairing will
not be restored automatically. To reconnect,
you must pair the device again.
The Hi-Fi Component system may not search
or connect properly in the following cases:
- If there is a strong electrical field around the
Hi-Fi Component.
- If several Bluetooth devices are
simultaneously paired with Hi-Fi Component.
- If the Bluetooth device is turned off, not in
place, or malfunctions.
- Note that such devices as microwave ovens,
wireless LAN adaptors, fluorescent lights,
and gas stoves use the same frequency
range as the Bluetooth device, which can
cause electric interference.
To disconnect the Bluetooth device
from the Hi-Fi Component
You can disconnect the Bluetooth device from
the Hi-Fi Component. For instructions, see the
Bluetooth device's user manual.
• The Hi-Fi Component will be disconnected.
• When the Hi-Fi Component is disconnected
from the Bluetooth device, the Hi-Fi Component
displays DISCONNECTED
;
READY on its
display.
To disconnect the Hi-Fi Component
from the Bluetooth device
Press another mode button on the front panel of
the Hi-Fi Component to switch from Bluetooth
mode to another mode or turn off the Hi-Fi
Component. The currently connected device is
disconnected.
| NOTES |
The connected Bluetooth device will wait a
certain amount of time for a response from
the Hi-Fi Component before terminating the
connection. (Disconnection time may differ,
depending on the Bluetooth device)
In Bluetooth connection mode, the Bluetooth
connection will be lost if the distance between
the Hi-Fi Component and the Bluetooth device
exceeds 16.25 feet (5 meters).
If the Bluetooth device comes back into the
effective range after disconnecting, you can
restart the Hi-Fi Component to restore the
pairing with the Bluetooth device.
The Hi-Fi Component automatically turns off
after 25 minutes in the Ready mode.
When a Bluetooth device is connected to the
Hi-Fi Component system, the Hi-Fi Component
System automatically switches to the Bluetooth
mode if it was in a different mode.
Using Bluetooth Power On
When the product is turned off, you can connect
your smart device to the product via a Bluetooth
connection to turn it on.
1. Press and hold the Bluetooth button on
the remote to set the Bluetooth Power On
function On. Bluetooth Power On appears
on the display.
2. When the product is off, connect your smart
device to the product via Bluetooth. (For
information on Bluetooth connections, refer
to your smart device’s manual.)
3. When the connection is complete, the
product turns itself on automatically in
Bluetooth mode.
• Select the desired music to play from your
smart device.
| NOTES |
Press and hold the Bluetooth button on the
remote control to turn the Bluetooth Power On
function on or off.
Each time you press and hold this button, the
Hi-Fi Component displays Bluetooth Power
On
;
Off on its display.
17 English
02687L-01-MX-HS9000-ZC-ENG.indd 17 2014-03-20 오후 12:16:38
Functions
TV SoundConnect
You can listen to the sound from your
SoundConnect Compatible Samsung TV
through the Hi-Fi Component by using the TV
SoundConnect function.
To connect the Hi-Fi Component to a
SoundConnect Compatible Samsung
TV
Before activating this function, be sure to set the
Samsung TV's SoundConnect or SoundShare
function to On.
1. Press the TV SoundConnect button of
the Hi-Fi Component to display the TV
SOUNDCONNECT message.
WAIT
;
SEARCH
;
REQUEST
2. Set Add New Device to On in the TV's
SoundConnect Settings menu. (Refer to the
TV's user manual for details.)
3. When the Hi-Fi Component is connected
to the TV, it will display [TV] Name
;
CONNECTED on the front display.
4. The audio from the connected TV plays over
the Hi-Fi Component system.
| NOTES |
The SoundConnect feature is available on some
Samsung TVs released since 2012. Check
whether your TV supports the SoundShare or
SoundConnect function.
(For further details, refer to the TV's user's
manual.)
If you unplug the Hi-Fi Component, the TV
SoundConnect connection is terminated. To
re-establish the connection, plug the Hi-Fi
Component into an outlet, and then set the TV
SoundConnect connection again.
Only one Hi-Fi Component can be connected
to a TV via TV SoundConnect.
To connect to another TV in TV SoundConnect
at time mode, press the
button for more
than 5 seconds, and then connect to the other
TV by following the directions above.
To disconnect the TV from the Hi-Fi
Component
You can disconnect the TV from Hi- Fi
Component.
For instructions, see the TV's user manual.
• When the Hi-Fi Component is disconnected
from the TV, the Hi-Fi Component displays
DISCONNECTED
;
REQUEST on its display.
To disconnect the Hi-Fi Component
from the TV
Press another mode button on the front panel
of the Hi-Fi Component to switch from TV
SoundConnect mode to another mode or turn off
the Hi-Fi Component. The currently connected
device is disconnected.
| NOTES |
The connected TV will wait a certain amount
of time for a response from the Hi-Fi
Component before terminating the connection.
(Disconnection time may differ, depending on
the TV)
The connection may be lost or sound may
stutter if the distance between the TV and the
Hi-Fi Component exceeds 6.5 feet (2 m).
Instability in the network environment may
cause the connection to be lost or sound to
stutter.
The Hi-Fi Component automatically turns off
after 25 minutes if it is not connected to a TV.
18 English
02687L-01-MX-HS9000-ZC-ENG.indd 18 2014-03-20 오후 12:16:38
03 Functions
Using My Karaoke
You can use the MY Karaoke function to sing
along with your favorite CDs and USB tracks.
1. Connect the microphone to the MIC jack on
the front of the product.
• If your microphone plug is smaller than the
6.3mm MIC jack, you need a Connector-
Adaptor (not supplied) to complete the
connection.
- First, connect the Connector-Adaptor to
the MIC jack on the front of the product,
- Second, connect the microphone (with
larger jack) to the Connector-Adaptor.
2. Press the MIC VOL-, + button on the
remote control to adjust the volume of the
microphone.
3. Press the MY KARAOKE button on the
remote control to suppress the vocal if you
need to. Each time you press the button, the
selection changes as follows:
MY KARAOKE ON
;
MY KARAOKE OFF
• If you hear strange noises (squealing or
howling) while using the Karaoke feature,
move the microphone away from the
speakers. Turning down the microphone's
volume or the speaker volume is also
effective. Do not aim the MICROPHONE
towards the SPEAKERS.
• The microphone does not operate in the
AUX and TUNER mode.
• If you connect a microphone, GIGA
SOUND automatically turns off. To turn
Giga Sound back on you must remove
the microphone, and then press the GIGA
SOUND BEAT button.
• When My Karaoke is on, GIGA SOUND
does not work.
• When you turn My Karaoke off, all My
Karaoke settings are lost.
• My Karaoke is only available when a
microphone is connected to the Hi-Fi
Component.
• My Karaoke does not operate in the
Bluetooth, TV SoundConnect, FM and AUX
mode.
Auto Change Function
You can circularly play between the disc and the
USB.
1. Press the AUTO CHANGE button to select a
mode and press
¬
to apply your selection.
• If Program Play has not been set in CD/
USB
AUTO CHANGE OFF
;
AUTO CHANGE ALL
• If Program Play has been set in CD/USB
AUTO CHANGE OFF
;
AUTO CHANGE ALL
;
AUTO CHANGE PROGRAM
• When the AUTO CHANGE mode is "ALL",
- the music will be played on DISC
;
USB1
;
USB2 continuously.
- if you press the POWER button, function
change button or the EJECT button, the
AUTO CHANGE function automatically
switches to "OFF" mode.
- the recording can't work.
- the REPEAT function can't work and
automatically changes to OFF.
- the REC SPEED, USB REC button can't
work.
• When USB is playing, if you disconnected
the USB, the AUTO CHANGE function
automatically switches to "OFF" mode.
• If there's no USB1, it will jump to USB2.
Listening to the Radio
To Store the Stations You Want
You can store up to:
15 FM stations.
1. Select FM by pressing the TUNER/AUX
button.
2. To search for a station, press the TUNING
MODE button on the remote control or the
@
button on the product one or more times until
MANUAL is displayed.
19 English
02687L-01-MX-HS9000-ZC-ENG.indd 19 2014-03-20 오후 12:16:38
Functions
3. Find a station by:
• Pressing and holding the TUNING/ALBUM
,
or
.
button on the remote control
to automatically search for broadcasting
stations.
4. Press the MO/ST button to switch between
stereo and mono.
• In a poor reception area, select MONO for
a clear, interference-free broadcast.
• This applies only when listening to an FM
station.
5. If you do not want to store the radio station
found, go back to Step 3 and search for
another station.
Otherwise:
a. Press the
¬
button.
b. Or, press the TUNING/ALBUM button
on the remote control to select a program
number in the PRESET mode.
c. Press the
¬
button to save the preset.
6. To store other radio frequencies, repeat Steps
3 to 5.
| NOTES |
In Tuner mode
- In the Manual mode, you can use the
1
or
2
button or the DJ JOG control.
- In the Preset mode, you can use the
1
or
2
button or the DJ JOG control on the
product to search a stored radio station.
Selecting a Stored Station
To listen to a stored station, follow these steps:
1. Select FM by pressing the TUNER/AUX
button on the product or remote control.
2. Press the TUNING MODE button on the
remote control until “PRESET” is displayed.
3. Press the
1
,
2
buttons on the main unit or
the TUNING/ALBUM
,
,
.
buttons on the
remote control to select a preset number.
or
Turn the DJ JOG control left or right on the
main unit to select the stored station.
Timer Function
Setting the Clock
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Press the TIMER SET button on the remote
control twice. "CLOCK SET" is displayed.
2. Press the
¬
button on the remote control.
The hour flashes.
•
To increase the hours: TUNING/ALBUM
,
•
To decrease the hours: TUNING/ALBUM
.
3. When the correct hour is displayed, press the
¬
button, and then the minutes flash.
•
To increase the minutes: TUNING/ALBUM
,
•
To decrease the minutes: TUNING/ALBUM
.
4. When the correct minute is displayed, press
the
¬
button. "TIMER PLAY SET" appears
in the display.
Setting the Timer
The timer enables you to set the product to switch
on or off at specific times automatically.
• Before setting the timer, check that the current
time is correct.
• For each step, you have a few seconds to set
the required options. If you exceed this time,
you must start again.
• If you no longer want the product to be switched
on or off automatically, you must cancel the
timer by pressing the TIMER ON/OFF button.
Example: You want to wake up to
music every morning.
1. Press the TIMER SET button until TIMER
PLAY SET is displayed.
2. Press the
¬
button.
Result: ON TIME is displayed for a few
seconds. You can set the timer switch-on
time.
20 English
02687L-01-MX-HS9000-ZC-ENG.indd 20 2014-03-20 오후 12:16:38
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Samsung MXHS9000 Manuel utilisateur

Catégorie
Lecteur CD
Taper
Manuel utilisateur

dans d''autres langues