Samsung MX-JS8000 Manuel utilisateur

PREMIUM HI-FI Component System

user manual

MX-JS9000

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 1 2015-03-23 오전 11:08:38

Safety Information

2 English

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

This symbol indicates "dangerous voltage"

inside the product that presents a risk of

electric shock or personal injury.

This symbol indicates important

instructions accompanying the product.

WARNING

• To reduce the risk of fire or electric shock, do

not expose this appliance to rain or moisture.

CLASS 1 LASER PRODUCT

This Compact Disc player is classified as a CLASS

1 LASER product. Use of controls, adjustments

or performance of procedures other than those

specified herein may result in hazardous radiation

exposure.

Complies with 21CFR 1040.10 except for

deviations pursuant to Laser Notice No. 50, dated

June 24, 2007.

DANGER :

• VISIBLE AND INVISIBLE LASER RADIATION

WHEN OPEN. AVOID DIRECT EXPOSURE TO

BEAM. (FDA 21 CFR)

CAUTION :

• CLASS 3B VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN. AVOID EXPOSURE

TO THE BEAM. (IEC 60825-1)

• THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS

OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE. DO NOT OPEN COVER AND DO

NOT REPAIR YOURSELF. REFER SERVICING

TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LÁSER CLASE 1

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 2 2015-03-23 오전 11:08:38

01 Safety Information

3 English

Precautions

• Ensure that the AC power supply in your house

complies with the identification sticker located

on the back of your product.

• Install your product horizontally, on a suitable

base (furniture), with enough space around it for

ventilation (3 - 4 inches/7.5 - 10 cm).

• Do not place the product on amplifiers or other

equipment which may become hot. Make sure

the ventilation slots are not covered.

• Do not stack anything on top of the product.

• Before moving the product, ensure the Disc

Insert tray is empty.

• To turn off the product completely, disconnect

the AC plug from the wall outlet. Disconnect the

AC plug from the wall outlet if you will leave the

device unused for a long period of time.

• During thunderstorms, disconnect the AC plug

from the wall outlet. Voltage spikes due to

lightning could damage the product.

• Do not expose the product to direct sunlight

or other heat sources. This could cause the

product to overheat and malfunction.

• Protect the product from moisture, excess heat,

and equipment creating strong magnetic or

electric fields (i.e. speakers.).

• Disconnect the power cable from the AC supply

if the product malfunctions.

• Your product is not intended for industrial use. It

is for personal use only.

• Condensation may occur if your product or

disc has been stored in cold temperatures. If

transporting the product during the winter, wait

approximately 2 hours until the product has

reached room temperature before using.

• The batteries used with this product contain

chemicals that are harmful to the environment.

Do not dispose of batteries in the general

household trash.

• Place the loudspeakers at a reasonable distance

on either side of the system to ensure good

stereo sound.

• Direct the loudspeakers towards the listening

area.

• Do not expose this apparatus to dripping or

splashing. Do not place objects filled with

liquids, such as vases, on the apparatus.

• To turn this apparatus off completely, you must

disconnect it from the wall outlet. Consequently,

the wall outlet and power plug must be readily

accessible at all times.

• Use only a properly grounded plug and

receptacle.

- An improper ground may cause electric shock

or equipment damage. (Class 1 Equipment

only.)

• Please check the volume level before playing

not to startle the elderly, infirm and pregnant

woman at a sudden loud sound.

Disc Storage & Management

• Holding Discs

- Fingerprints or scratches on

a disc may reduce sound and

picture quality or cause skipping.

- Avoid touching the surface of a disc where

data has been recorded.

- Hold the disc by the edges so that fingerprints

will not get on the surface.

- Do not stick paper or tape on the disc.

• Cleaning Discs

- If you get fingerprints or dirt on a

disc, clean it with a mild detergent

diluted in water and wipe with a

soft cloth.

- When cleaning, wipe gently from

the inside to the outside of the disc.

• Disc Storage

`

Do not keep in direct sunlight.

`

Keep in a cool ventilated area.

`

Keep in a clean protection jacket and store

vertically.

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 3 2015-03-23 오전 11:08:39

Contents

4 English

SAFETY INFORMATION

2 Warning

3 Precautions

3 Disc Storage & Management

GETTING STARTED

6 Front Panel

7 Rear Panel

8 Remote Control

9 Accessories

9 Connecting the Speakers

9 Cautions on Moving the Speakers

FUNCTIONS

10 Using Samsung Audio Remote App

10 Install Samsung Audio Remote App

10 Accessing the Samsung Audio Remote

App

10 The Display function

10 Changing Display mode

10 The DEMO function

11 Playing a CD

11 Loading a Compact Disc

11 CD/MP3/CD-R Playback

11 Selecting a Track

12 Searching for a Specific Music Passage on

a CD

12 Repeat One or All Tracks on a CD

12 Playing USB Devices

12 USB Device Playback

12 To Select a File from a USB Device

13 To repeat

13 To Use High Speed Search

13 To Delete a File

13 To Move to the Next/Previous Folder and

Next/Previous File

14 To safely remove a USB device

14 Read Before Connecting USB Storage

Devices

14 Searching for a Track Quickly

14 Using the MY LIST Function

15 Viewing or Editing MY LIST Tracks

15 Bluetooth

15 What is Bluetooth?

16 To connect the Hi-Fi Component to a

Bluetooth device

17 To disconnect the Bluetooth device from

the Hi-Fi Component

17 To disconnect the Hi-Fi Component from

the Bluetooth device

17 Using Bluetooth Power On

18 TV SoundConnect

18 To connect the Hi-Fi Component to a

SoundConnect Compatible Samsung TV

18 To disconnect the TV from the Hi-Fi

Component

18 To disconnect the Hi-Fi Component from

the TV

18 Using My Karaoke

19 Auto Change Function

19 Listening to the Radio

19 To Store the Stations You Want

20 Selecting a Stored Station

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 4 2015-03-23 오전 11:08:39

Contents

5 English

20 Timer Function

20 Setting the Clock

20 Setting the Timer

22 Cancelling the Timer

22 Setting the Sleep

22 The Recording Function

22 Basic Recording

24 Recording Speed

24 Special Sound Effects

24 Selecting PRESET EQ Mode

24 Selecting USER EQ Mode

25 FOOTBALL MODE function

25 GIGA PARTY Function

25 BEAT WAVING Function

25 DJ BEAT Function

26 +PANNING Function

26 NON-STOP MUSIC RELAY Function

26 TEMPO Function

27 BOOTING SOUND Function

27 PARTY BEAT Function

27 Software Update

28 Disc and Format Compatibility

28 Supported Audio Formats

APPENDIX

29 Troubleshooting

30 Specifications

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 5 2015-03-23 오전 11:08:39

Getting Started

Front Panel

1

Display Panel

2

PARTY BEAT Pads

3

PARTY SOUND ◄ / ► button

PARTY BEAT button

4

MIC 1/2 jacks

MIC VOL JOG

5

TEMPO button

AUTO CHANGE button

NON-STOP MUSIC RELAY button

BEAT WAVING button

6

SEARCH button

FOLDER -/+ button

MEMORY button

DELETE button

ENTER button

7

AUX 1/2 Source buttons

TUNER Source button

DJ BEAT button for DJ sound effect

+PANNING button for DJ sound effect

Remote control sensor

DISC tray

BACKWARD SEARCH/SKIP button

7

STOP button

CD Source button

PLAY/PAUSE button

FORWARD SEARCH/SKIP button

OPEN/CLOSE button for Disc

8

VOLUME/SEARCH JOG

9

MY LIST button

USB 1/2 Source buttons

USB REC button

USB 1 jack for Playback only.

USB 2 jack for Playing and USB Recording

0

Bluetooth Source button

TV SOUNDCONNECT Source button

POWER button

• Press this button to switch your product

on or off.

!

Equalizer Jogs for adjusting 5-Band EQ

80Hz / 200Hz / 800Hz / 2kHz / 8kHz

@

PRESET EQ button

USER EQ button

GIGA PARTY button

FOOTBALL MODE button

DISPLAY/DEMO button

1

3

4

5

9

76 8

!

0

2

@

2

6 English

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 6 2015-03-23 오전 11:08:50

02 Getting Started

Rear Panel

1

POWER

• Insert only the provided power cable.

2

FM Antenna Terminals

1. Connect the FM antenna to the FM

antenna connector terminal.

2.

Slowly move the antenna wire until you find

a location where reception is good, then

fasten it to a wall or other rigid surface.

3

AUX IN 2 Terminals

1.

Use an Audio Cable (not supplied) to

connect AUX IN 2 on the main unit to

Audio Out on an external analog output

device.

• Be sure to match connector colors.

• If the external analog output device has

only one Audio Out jack, connect either

left or right.

• Press the AUX 1/2 button to select

AUX 2.

• If the product is in AUX mode for more

than eight hours and no buttons on the

front panel or remote are pushed, the

system will turn off.

4

AUX IN 1 Terminals

1.

Use to connect an external device such as

an MP3 player.

• Connect AUX IN 1 on the rear panel

of the main unit to the Audio Out of an

external device/MP3 player.

• Press the AUX 1/2 button to select

AUX1.

5

LED Terminals for Speaker Beat

Waving.

6

ONLY FOR SERVICE

• This jack is for testing only. Please do

not use.

7

Cooling fan

• The fan operates while the unit is

powered on.

If you set the unit to the minimum

volume, the fan won't operate.

Secure a minimum 6 inches (15 cm) of

clear space on all sides of the fan when

installing the main unit.

8

2.2 CH Speaker Terminals

1. To achieve the correct sound quality,

when you connect the speakers, match

the color of the speaker plugs to the

color of the speaker jacks. See below.

• LEFT channel (marked

, White/Purple).

• RIGHT channel (marked

, Red/Purple).

• Don't force the Purple SUBWOOFER

connector into the White or Red speaker

jack.

7 English

2

1

34 5 6 87

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 7 2015-03-23 오전 11:08:51

Getting Started

Installing Batteries In The Remote Control

• Place batteries in the remote control so they

match the polarity of the illustrations in the

battery compartment. : (+) to (+) and (–) to (–).

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble, or overheat

the batteries.

• There is a danger of explosion if the battery is

replaced with the wrong battery type. Replace

only with the same or equivalent type.

• The remote control can be used up to

approximately 23 feet (7 meters) in a straight

line from the system.

Remote Control

Power

Bluetooth

TUNING MODE

PLAY/PAUSE

TIMER SET

MY KARAOKE

CD

USB

TUNER/AUX

NON-STOP MUSIC RELAY

PRESET EQ

STOP

FOOTBALL

VOLUME -

MY LIST

TIMER ON/OFF

DISPLAY

MIC VOLUME (-, +)

DELETE

BEAT WAVING

TV SoundConnect

REC SPEED

MO/ST, TEMPO

+PANNING

REPEAT

AUTO CHANGE

VOLUME +

SEARCH

SLEEP (Set a sleep time to shut off the

product.)

,

.

FORWARD, BACKWARD SEARCH

USB REC

DJ BEAT

GIGA PARTY

MUTE (Turn off the sound temporarily. Press

again to turn the sound back on.)

SKIP/TUNING

FOLDER (-, +), EFFECT (-, +)

AH59-02694D

MEMORY

USER EQ

8 English

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 8 2015-03-23 오전 11:08:52

02 Getting Started

Accessories

Check for the supplied accessories below.

AH59-02694D

User Manual Remote Control / Batteries

ON

OFF

Power Cable FM Antenna Microphone (MIC)

• Figures and illustrations in this user's manual are provided for reference only and may differ from actual

product appearance.

Connecting the Speakers

Recommended speaker setup.

| IMPORTANT |

✎

The product may not operate properly if it is

subject to shaking or external shocks or if the

speakers are not installed as recommended.

✎

Do not stretch the speaker wires or place a heavy

object on them.

Cautions on Moving the Speakers

• When moving the main unit and speakers, make sure to separate all connected speaker cables before.

9 English

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 9 2015-03-23 오전 11:08:54

Functions

Using Samsung Audio Remote App

Install Samsung Audio Remote App

To control the product with your Smart Device and

the Samsung Audio Remote app, download the

Samsung Audio Remote App by accessing the

app through Google Play store.

| NOTE |

✎

The APP function only supports Android mobile

phone devices running Android OS 3.0 or later.

Market search :

Samsung Audio Remote

ANDROID APP ON

Accessing the Samsung Audio Remote

App

After you install the Samsung Audio Remote

app, follow the instructions in the app.

The Display function

You can view functions available on the display,

adjust the brightness of the display and set the

Display/LED either on or off.

Changing Display mode

Press the DISPLAY/DEMO button on the main

unit.

Each time you press this button, the mode will

change as follows:

- The display automatically darkens if there is no

operation of the main unit or the remote control

for 5 minutes, and turns on again upon key/

remote operation.

Note that percussion input will not revive the

display.

- Set the Dimmer function to ON to keep the

display dimmed out.

• The Dimmer function

The Dimmer function is selected and the display

darkens.

• LED OFF

The Front display LED and speaker LED is

turned off while the dimmer function is working.

• Clock ON

The Clock you set is displayed.

• Display/LED ON

All displays and the LED are turned on.

The DEMO function

Press the DISPLAY/DEMO button for 5 seconds

to start the Demo mode.

When you press the DISPLAY/DEMO button

while displaying the demo, the function operates

as follows:

DIMMER

;

LED Off (unit/speaker)

;

--:-- [time

display]

;

LED On (unit/speaker)

To cancel the Demo mode

• Press the DISPLAY/DEMO again for 5 seconds.

The DEMO mode is canceled and the product

turns off.

•

Press the CD, Bluetooth, TUNER, AUX1/2,

TV SOUNDCONNECT or USB1, USB2 button.

The DEMO mode is canceled and the mode is

changed to the mode you selected.

| NOTES |

✎

When the DEMO function is on, only the

POWER (

), VOL, MUTE buttons and the

buttons mentioned above work.

✎

It mutes DEMO music automatically after 3

minutes. The message remains displayed on

the front panel after its playback.

✎

There are two tracks of DEMO music. You

can switch between them using

1

and

2

buttons while playing.

10 English

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 10 2015-03-23 오전 11:08:55

03 Functions

Playing a CD

Loading a Compact Disc

You can play standard compact discs that require

no adapter.

1. Press the OPEN/CLOSE button, Place a disc

gently into the tray with the disc's label facing

up.

After putting in the disc, press the OPEN/

CLOSE button to start playing the disc.

• You can load or unload compact discs

when the radio, USB, or auxiliary source

function is selected. When you press

the OPEN/CLOSE button, all the other

functions will change to the CD mode.

• If no buttons are pressed on the main unit.

or remote control for more than 3 minutes

when the product is in Pause mode, it will

change to Stop mode.

• If no buttons are pressed on the main unit.

or remote control for more than 25 minutes

when the product is in Stop mode, the

product will turn off.

CD/MP3/CD-R Playback

| IMPORTANT |

✎

This product is designed to play the following

audio disc types: CD-ROM, CD-R, CD-RW.

1. Press the OPEN/CLOSE button and put

a disc into the disc tray with its label face

upwards.

2. After putting in the disc, press the OPEN/

CLOSE button to start playing the disc.

• For MP3/WMA file, it may take several

minutes for the product to finish scanning

the disc tracks.

• If you play a file with an English title, the

song title will be shown in the display. (Titles

in other languages can not be displayed.)

• An English-titled track containing a

special character (@, $, *, etc.) will not be

displayed.

Track Indicator

Playtime

Indicator

3. To adjust the volume:

• Turn the VOLUME control on the main unit.

• Press the VOL+ or VOL- button on the

remote control.

The volume level can be adjusted in 51

steps (Vol min, Vol 1 ~ Vol 49, and Vol max).

4. PAUSING PLAYBACK

Main Unit/Remote control

To pause playback temporarily, press the

button.

Press the button to continue playing the

disc.

5. To end playing, press the

5

button.

| NOTES |

✎

If there is no CD inserted in the disc tray, the

unit displays "NO DISC".

✎

The quality of MP3/WMA-CD playback may

vary depending on the condition of the disc or

the condition of the recorder used to create the

disc.

✎

If a disc contains different types of files or

unnecessary folders, you will have problems

with playback.

✎

Gently insert a CD into the disc tray. Do not

apply excessive force.

- Do not apply force to the product or place a

heavy object on the product.

- Do not insert an out-of-spec or oddly

shaped CD (heart shaped, octangular, etc.).

You can damage the product.

- Carefully maintain your CDs.

Selecting a Track

You can select a desired track while the disc is

being played.

11 English

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 11 2015-03-23 오전 11:08:55

Functions

To play the current track from the

beginning

Press the

1

button, 3 seconds after the current

track started playing.

To play the previous track

Press the

1

button twice, 3 seconds or more

after the previous track starts playing.

To play the next track

Press the

2

button.

To play the track of your choice

Press the

1

or

2

button to move to a desired

track.

Searching for a Specific Music Passage

on a CD

When listening to a CD, you can quickly search for

a specific music passage on a track.

Forward Search ....................

4

Backward Search .................

3

You can also press and hold the

1

,

2

buttons

on the main unit to automatically scan for a track.

Repeat One or All Tracks on a CD

You can play a CD or tracks on a CD repeatedly.

1. Press the REPEAT button on the remote

control.

Each time you press this button, the mode

changes as follows:

MP3/WMA : OFF

;

TRACK

;

DIR

;

ALL

;

RANDOM

CD : OFF

;

TRACK

;

ALL

;

RANDOM

2. When you want to stop the repeat function,

press the REPEAT button until "OFF" is

displayed.

• OFF : Cancels repeat playback.

• TRACK : Repeatedly plays the selected

track.

• DIR (DIRECTORY) : Repeatedly plays all

tracks in the selected folder.

• ALL : Repeatedly plays the entire disc.

• RANDOM : Plays tracks in random order.

Playing USB Devices

Connect an external storage device such as a

USB flash memory or external HDD (Hard Disk

Drive) to the main unit. You can play files in MP3/

WMA format.

USB Device Playback

1. Connect the external USB storage device to

your main unit.

2. Select the USB mode by pressing the USB1,

USB2 button on the main unit or the USB

button on the remote control.

3. The first file of the first directory plays

automatically.

4. To stop playing

Press the

5

button to stop playing.

| IMPORTANT |

✎

Do not connect a USB recharger to the USB

port of this main unit. You can damage the

product.

✎

A maximum of 999 files can be played per USB

DEVICE.

To Select a File from a USB Device

You can select an MP3 file while the product is

playing.

| NOTE |

✎

If you want to move to the previous/next track,

press the

1

,

2

buttons briefly.

- The unit moves to the previous/next track

within the directory.

- If you press the

1

,

2

buttons more times

than the number of the files in the directory,

the unit moves to the next directory.

12 English

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 12 2015-03-23 오전 11:08:56

03 Functions

To repeat

1. Press the REPEAT button on the remote

control.

Each time you press this button, the mode

changes as follows:

OFF

;

TRACK

;

DIR

;

ALL

;

RANDOM

2. When you want to stop the repeat function,

press the REPEAT button until "OFF" is

displayed.

• OFF : Cancels repeat playback.

• TRACK : Repeatedly plays the selected

file.

• DIR (DIRECTORY) : Repeatedly plays all

files in the selected folder.

• ALL : Repeatedly plays all files.

• RANDOM : Plays files in random order.

| NOTE |

✎

If the file selected to be played is located in a

folder all the files within that folder are played

in random order. If the file selected is located in

the root folder all files will be played in random

order.

To Use High Speed Search

You can search a desired section quickly while the

product is playing.

Press the

3

,

4

button.

• Each time you press the

3

,

4

button, you

move through the section forward/backward

quickly.

| IMPORTANT |

✎

The product does not output sound during a

high speed search.

✎

You can also press and hold the

1

or

2

button on the main unit to automatically scan

for a track.

To Delete a File

You can delete a file from your USB device.

1. Select a file you want to delete.

2. Press the DELETE button on the main unit

or remote control. "DELETE YES/NO" is

displayed.

3. Use the VOLUME/SEARCH JOG on the

main unit or the

,

/

.

buttons on the remote

control to select YES/NO.

4. Please select "DELETE YES" and press the

¬

button. "DELETE END" appears and

deletion is completed.

To Move to the Next/Previous Folder

and Next/Previous File

Use SEARCH and FOLDER-, + buttons on the

remote control or on the main unit to move to the

next/previous file and folder.

1. Press the SEARCH button to display the

current and the next tracks on the panel.

2. To browse folders, press the FOLDER-, +

button on the main unit or remote control

once and the current folder is displayed.

Press it again to move to the next folder.

3. Press the

¬

button when the desired folder

is displayed, then it moves to the first track of

the selected folder. If no input is detected for

3 seconds after a folder is displayed, then it

moves to the first track of the folder.

4. File search remains the same as before. At

step 1, use VOLUME/SEARCH JOG on

the main unit or

,

/

.

button on the remote

control to select the desired file.

5. Once a folder is selected at step 2, Use

the adjusting VOLUME/SEARCH JOG on

the main unit or press

,

/

.

button on the

remote control. within 3 seconds to find the

desired file from the selected folder.

| NOTE |

✎

When sound files are stored in the root

directory rather than in a folder, press the

FOLDER-, + button to go to the first TRACK.

13 English

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 13 2015-03-23 오전 11:08:56

Functions

To safely remove a USB device

1. Press the

5

button twice while the USB is

playing or press the

5

button once when

play has stopped.

2. When the "REMOVE" message appears on

the display, remove the USB device.

Read Before Connecting USB Storage

Devices

• Some USB devices may not work properly with

this product.

• This product only supports external HDD`s that

are formatted in the FAT file system.

• USB 2.0 HDDs should be connected to a

separate power source. Otherwise, the USB 2.0

HDDs will not work.

• If multiple USB external storage are connected

together, only the music files in the first HDD will

be played.

• If a USB external device that has multi partition,

only the first partition which support file system

is recognized.

• Files with Digital Rights Management (DRM)

are not supported. DRM restricts unauthorized

access to a DRM file so that file is protected

from piracy.

• Even if a file has an .mp3 extension, the file

cannot be played if it is formatted in MPEG layer

1 or 2.

• Do not use an unrecognized USB hub.

• Only the first 15 characters of an audio file name

are shown on the product's display.

• Only removable HDDs with less than 160GB are

supported. Depending on the device, a 160GB-

or more removable HDD may not be supported.

• It can take several minutes for the product to

recognize the files on some USB devices.

• Some USB devices (USB HDDs, in particular)

may cause a delay when moving from track to

track.

• With USB storage devices supporting USB

VER1.1 only, the product may access files

slowly or may not recognize the file properties.

• The maximum electrical current provided by

each USB port to connected USB devices is

0.5A (based on DC 5V).

• If there is no USB connection or STOP mode

lasts for more than 25 minutes, the product will

automatically turn off.

• Some USB devices, digital cameras, USB card

readers, iPods, iPhones, and Smart Phones

may not be supported.

Searching for a Track Quickly

You can select a track directly without the

1

,

2

button.

CD-DA/MP3-CD/USB

1. Press the SEARCH button.

After pressing the SEARCH button, turn the

VOLUME/SEARCH JOG control on the main

unit to the left or right to select a desired

track.

2. Press the

¬

button when the desired track

is displayed, then it moves to the selected

track.

If no input is detected for 3 seconds, then it

moves to the selected track.

• You can move to the selected track directly.

3. When searching is done, the track will

automatically start playing.

Using the MY LIST Function

You can program the playback order of up to 99

tracks of your choice.

1. Press the MY LIST button to display the

message below:

LIST 01---

(01= LIST number, ---= track number)

14 English

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 14 2015-03-23 오전 11:08:56

03 Functions

2. Use the VOLUME/SEARCH JOG on the

main unit or

,

/

.

button on the remote

control to move to a desired track.

3. Press the

¬

button to confirm your

selection. The selection is stored and

LIST 02---

is displayed.

4. To select another track, follow Steps 2 and 3

above.

5. Press the

or MY LIST buttons to play the

my list tracks.

6. Press MY LIST button for 5 seconds to

display "MY LIST ON/OFF". Use VOLUME/

SEARCH JOG on the main unit or

,

/

.

button on the remote control to select ON or

OFF and press

¬

button to set.

• Selection will be cancelled automatically if

there is no input for 5 seconds.

Even when the MY LIST is set to OFF,

saved LIST items are maintained.

• If you eject the disc, CD list is deleted.

If you turn off the product, CD/USB list is

deleted.

• If a USB is disconnected while being used,

the USB list will be deleted.

| NOTES |

✎

CD/USB MY LIST play will stop if you try to

switch to another mode.

✎

USB REC and DELETE, SEARCH buttons will

not work in MY LIST mode. If you press such

buttons in MY LIST mode, "MY LIST PLAY"

will be displayed instead.

✎

If a file in the MY LIST to be played was not in

a supported format, playback skips to the next

file automatically.

✎

When the recording or copy is completed, the

My List of the USB 2 will be canceled.

Viewing or Editing MY LIST Tracks

You can view and edit a list of programmed tracks.

1. Press MY LIST once and FOLDER-, +

button to display the message below:

SAVED 01 002

(01= List number, 002= track number)

2. Repeatedly press the

¬

button until the

desired track is displayed.

3. Use the VOLUME/SEARCH JOG on the

main unit or

,

/

.

button on the remote

control to select a different track.

4. Press the

¬

button to confirm your

selection.

5. To play the my list tracks, press the

button.

6. If you press DELETE button while a SAVED

track is displayed, "REMOVE YES/NO"

appears. Use

,

/

.

button on the remote to

select an option and then press

¬

button to

remove the track of the My List track list.

• Selection will be cancelled automatically if

there is no input for about 5 seconds.

To repeat

1. Press the REPEAT button.

Each time you press this button, the mode

changes as follows:

OFF

;

TRACK

;

ALL

Bluetooth

You can use a Bluetooth device to enjoy music

with high quality stereo sound, all without wires!

What is Bluetooth?

Bluetooth is a technology that enables Bluetooth

compliant devices to interconnect easily with each

other using a short, wireless connection.

15 English

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 15 2015-03-23 오전 11:08:56

Functions

• A Bluetooth device may cause noise or

malfunction, depending on usage, when:

- A part of your body is in contact with the

receiving/transmitting system of the Bluetooth

device or the Hi-Fi Component.

- It is subject to electrical variation from

obstructions caused by a wall, corner, or

office partitioning.

- It is exposed to electrical interference from

same frequency-band devices including

medical equipment, microwave ovens, and

wireless LANs.

• Pair the Hi-Fi Component with the Bluetooth

device while they are close together.

•

The greater the distance between the Hi-Fi

Component and the Bluetooth device, the worse

the quality. If the distance exceeds the Bluetooth

operational range, the connection is lost.

• In poor reception areas, the Bluetooth

connection may not work properly.

• The Bluetooth connection only works when

the Bluetooth device and the Hi-Fi Component

are close together. The connection will be

automatically cut off if the Bluetooth device

is out of range. Even within range, the sound

quality may be degraded by obstacles such as

walls or doors.

• This wireless device may cause electric

interference during its operation.

To connect the Hi-Fi Component to a

Bluetooth device

Before you begin, confirm that your Bluetooth

device supports the Bluetooth-compliant stereo

headset function.

1. Press the Bluetooth button of the Hi-Fi

Component to display the BLUETOOTH

message.

• You will see WAIT for a short period of time

and then READY on the front display of the

Hi-Fi Component.

2. Select the Bluetooth menu on the Bluetooth

device you want to connect. (Refer to the

Bluetooth device's user manual.)

3. Select "[Samsung] HI-FI XXXXXX J-Series"

from the list.

• When the product is connected to the

Bluetooth device, it will display Device

name

;

CONNECTED

;

BLUETOOTH

on the front display.

• If the Bluetooth device has failed to pair

with the product, delete the previous

"[Samsung] HI-FI XXXXXX J-Series"

found by the Bluetooth device and have it

search for the product again.

4. You can listen to the music playing on the

connected Bluetooth device over the Hi-Fi

Component system.

• In Bluetooth mode, some model's Play/

Stop/Next/Back functions are not available.

| NOTES |

✎

The product only supports Middle Quality

SBC data (up to 237kbps@48kHz), and

does not support High Quality SBC data

([email protected]).

✎

The AVRCP feature is not supported.

✎

Connect only to a Bluetooth device that

supports the A2DP (AV) function.

✎

You cannot connect to a Bluetooth device that

supports only the HF (Hands Free) function.

✎

Only one Bluetooth device can be paired at a

time.

✎

Once you have turned off the Hi-Fi Component

and the pairing is disconnected, the pairing will

not be restored automatically. To reconnect, you

must pair the device again.

✎

The Hi-Fi Component system may not search

or connect properly in the following cases:

16 English

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 16 2015-03-23 오전 11:08:56

03 Functions

- If there is a strong electrical field around the

Hi-Fi Component.

- If the Bluetooth device is turned off, not in

place, or malfunctions.

- Note that such devices as microwave ovens,

wireless LAN adaptors, fluorescent lights,

and gas stoves use the same frequency

range as the Bluetooth device, which can

cause electric interference.

To disconnect the Bluetooth device

from the Hi-Fi Component

You can disconnect the Bluetooth device from

the Hi-Fi Component. For instructions, see the

Bluetooth device's user manual.

• The Hi-Fi Component will be disconnected.

• When the Hi-Fi Component is disconnected

from the Bluetooth device, the Hi-Fi Component

displays DISCONNECTED

;

READY on its

display.

To disconnect the Hi-Fi Component

from the Bluetooth device

Press another mode button on the front panel of

the Hi-Fi Component to switch from Bluetooth

mode to another mode or turn off the Hi-Fi

Component. The currently connected device is

disconnected.

| NOTES |

✎

The connected Bluetooth device will wait a

certain amount of time for a response from

the Hi-Fi Component before terminating the

connection. (Disconnection time may differ,

depending on the Bluetooth device.)

✎

In Bluetooth connection mode, the Bluetooth

connection will be lost if the distance between

the Hi-Fi Component and the Bluetooth device

exceeds 32.80 feet (10 meters).

✎

If the Bluetooth device comes back into the

effective range after disconnecting, you can

restart the Hi-Fi Component to restore the

pairing with the Bluetooth device.

✎

The Hi-Fi Component automatically turns off

after 25 minutes in the Ready mode.

✎

When a Bluetooth device is connected to the

Hi-Fi Component system, the Hi-Fi Component

System automatically switches to the Bluetooth

mode if it was in a different mode.

Using Bluetooth Power On

When the product is turned off, you can connect

your smart device to the product via a Bluetooth

connection to turn it on.

1. Press and hold the Bluetooth button on

the remote to set the Bluetooth Power On

function On. Bluetooth Power On appears

on the display.

2. When the product is off, connect your smart

device to the product via Bluetooth. (For

information on Bluetooth connections, refer

to your smart device’s manual.)

The Bluetooth device must have been paired

with the Hi-Fi Component before.

3. When the connection is complete, the

product turns itself on automatically in

Bluetooth mode.

• Select the desired music to play from your

smart device.

| NOTE |

✎

Press and hold the Bluetooth button on the

remote control to turn the Bluetooth Power On

function on or off.

Each time you press and hold this button, the

Hi-Fi Component displays Bluetooth Power

On

;

Off on its display.

17 English

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 17 2015-03-23 오전 11:08:56

Functions

TV SoundConnect

You can listen to the sound from your

SoundConnect Compatible Samsung TV

through the Hi-Fi Component by using the TV

SoundConnect function.

To connect the Hi-Fi Component to a

SoundConnect Compatible Samsung

TV

Before activating this function, be sure to set the

Samsung TV's SoundConnect or SoundShare

function to On.

1. Press the TV SoundConnect button of

the Hi-Fi Component to display the TV

SOUNDCONNECT message.

WAIT

;

SEARCH

;

REQUEST

2. Set Add New Device to On in the TV's

SoundConnect Settings menu. (Refer to the

TV's user manual for details.)

3. When the Hi-Fi Component is connected

to the TV, it will display [TV] Name

;

CONNECTED

;

TV on the front display.

4. The audio from the connected TV plays over

the Hi-Fi Component system.

| NOTES |

✎

The SoundConnect feature is available on some

Samsung TVs released since 2012. Check

whether your TV supports the SoundShare or

SoundConnect function. (For further details,

refer to the TV's user's manual.)

✎

If you unplug the Hi-Fi Component, the TV

SoundConnect connection is terminated. To

re-establish the connection, plug the Hi-Fi

Component into an outlet, and then set the TV

SoundConnect connection again.

✎

Only one Hi-Fi Component can be connected

to a TV via TV SoundConnect at time.

✎

To connect to another TV in TV SoundConnect

mode, press the

button for more than 5

seconds, and then connect to the other TV by

following the directions above.

To disconnect the TV from the Hi-Fi

Component

You can disconnect the TV from Hi- Fi

Component.

For instructions, see the TV's user manual.

• When the Hi-Fi Component is disconnected

from the TV, the Hi-Fi Component displays

DISCONNECTED

;

REQUEST on its display.

To disconnect the Hi-Fi Component

from the TV

Press another mode button on the front panel

of the Hi-Fi Component to switch from TV

SoundConnect mode to another mode or turn off

the Hi-Fi Component. The currently connected

device is disconnected.

| NOTES |

✎

The connected TV will wait a certain amount

of time for a response from the Hi-Fi

Component before terminating the connection.

(Disconnection time may differ, depending on

the TV)

✎

The connection may be lost or sound may

stutter if the distance between the TV and the

Hi-Fi Component exceeds 6.5 feet (2 m).

✎

Instability in the network environment may

cause the connection to be lost or sound to

stutter.

✎

The Hi-Fi Component automatically turns off

after 25 minutes if it is not connected to a TV.

Using My Karaoke

You can use the MY Karaoke function to sing

along with your favorite CDs and USB tracks.

1. Connect the microphone to the MIC jack on

the front of the main unit.

• If your microphone plug is smaller than the

6.3mm MIC jack, you need a Connector-

Adaptor (not supplied) to complete the

connection.

18 English

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 18 2015-03-23 오전 11:08:56

03 Functions

- First, connect the Connector-Adaptor to

the MIC jack on the front of the main unit.

- Second, connect the microphone (with

larger jack) to the Connector-Adaptor.

2.

Use the MIC VOL JOG on the main unit or

the

MIC VOL -, +

button on the remote control to

adjust the volume of the microphone.

3. Press the MY KARAOKE button on the

remote control to suppress the vocal if you

need to. Each time you press the button, the

selection changes as follows:

MY KARAOKE ON

;

MY KARAOKE OFF

• If you hear strange noises (squealing or

howling) while using the Karaoke feature,

move the microphone away from the

speakers. Turning down the microphone's

volume or the speaker volume is also

effective. Do not aim the MICROPHONE

towards the SPEAKERS.

• The microphone does not operate in the

AUX and TUNER mode.

• For My Karaoke mode, this mode works

only for CD/MP3, USB playback. and this

mode cannot be applied during Tuner,

Bluetooth, AUX and TV Sound Connect

modes.

• MY KARAOKE is available when a

microphone is disconnected to the Hi-Fi

component.

• When you turn My Karaoke off, all My

Karaoke settings are lost.

Auto Change Function

You can circularly play between the disc and the

USB.

1. Press the AUTO CHANGE button to select a

mode and press

¬

to apply your selection.

•

If MY LIST Play has not been set in CD/USB

AUTO CHANGE OFF

;

AUTO CHANGE ALL

• If MY LIST Play has been set in CD/USB

AUTO CHANGE OFF

;

AUTO CHANGE ALL

;

AUTO CHANGE MY LIST

• When the AUTO CHANGE mode is "ALL",

- The music will be played on DISC

;

USB1

;

USB2 continuously.

- When the AUTO CHANGE mode is "MY

LIST", the Hi-Fi Component will play My

List tracks from DISC, USB1, and USB2

continuously.

- If you press the POWER button, function

change button or the OPEN/CLOSE

button, the AUTO CHANGE function

automatically switches to "OFF" mode.

- The REPEAT function can't work and

automatically changes to OFF.

• When USB is playing, if you disconnected

the USB, the AUTO CHANGE function

automatically switches to "OFF" mode.

• If there's no USB1, it will jump to USB2.

• When the auto change mode is "ALL/MY

LIST", the DELETE , MY LIST and REPEAT

functions do not work, and the unit displays

"AUTO CHANGE ALL/MY LIST".

• When DISC play ends, if there's no USB 1,

the unit will play music from USB 2.

• When DISC play ends, if there's no USB

1 and USB 2, the unit will continue to play

the disc.

• When USB 2 play ends, if there's no DISC,

the unit will play music from USB 1.

Listening to the Radio

To Store the Stations You Want

You can store up to: 15 FM stations.

1. Select FM by pressing the TUNER button.

2. To search for a station, press the TUNING

MODE button on the remote control or the

@

button on the main unit one or more times

until MANUAL is displayed.

19 English

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 19 2015-03-23 오전 11:08:56

Functions

3. Press the MO/ST button to switch between

stereo and mono.

• In a poor reception area, select MONO for

a clear, interference-free broadcast.

• This applies only when listening to an FM

station.

4. Find a station by:

• Pressing and holding the TUNING

1

/

2

or

,

/

.

button on the remote control

to automatically search for broadcasting

stations.

5. If you do not want to store the radio station

found, go back to Step 3 and search for

another station.

Otherwise:

a. Press the

¬

button.

b. Or, press the TUNING

1

/

2

or

,

/

.

button on the remote control to select a

program number in the PRESET mode.

c. Press the

¬

button to save the preset.

6. To store other radio frequencies, repeat Steps

4 to 5.

| NOTE |

✎

In Tuner mode

- In the MANUAL mode, you can use the

1

or

2

button.

- In the PRESET mode, you can use the

1

or

2

button on the main unit to search a

stored radio station.

Selecting a Stored Station

To listen to a stored station, follow these steps:

1. Select FM by pressing the TUNER button on

the main unit or remote control.

2. Press the TUNING MODE button on the

remote control or the

5

button on the main

unit one or more times until "PRESET" is

displayed.

3. Press the MEMORY button on the main unit

or remote control, when the desired station is

displayed, then the station stored.

4. Press the

1

,

2

buttons on the main unit or

the TUNING

1

/

2

or

,

/

.

buttons on the

remote control to select a preset number.

or

You can use the TUNING

1

/

2

or

,

/

.

button to select the stored station.

Timer Function

Setting the Clock

For each step, you have a few seconds to set the

required options. If you exceed this time, you must

start again.

1. Press the TIMER SET button on the remote

control twice. "CLOCK SET" is displayed.

2. Press the

¬

button on the remote control.

The hour flashes.

•

To increase the hours:

,

•

To decrease the hours:

.

3. When the correct hour is displayed, press the

¬

button, and then the minutes flash.

• To increase the minutes:

,

•

To decrease the minutes:

.

4. When the correct minute is displayed, press

the

¬

button. "TIMER PLAY SET" appears

in the display.

Setting the Timer

The timer enables you to set the product to switch

on or off at specific times automatically.

• Before setting the timer, check that the current

time is correct.

• For each step, you have a few seconds to set

the required options. If you exceed this time,

you must start again.

• If you no longer want the product to be switched

on or off automatically, you must cancel the

timer by pressing the TIMER ON/OFF button.

20 English

[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 20 2015-03-23 오전 11:08:56

La page charge ...

Samsung MX-JS8000 Manuel utilisateur

Ce manuel convient également à

Samsung MX-JS8000 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents