Maytag MVWB800VQ - Bravos Washer With Window Lid Mode d'emploi

Marque: Maytag

Modèle: MVWB800VQ - Bravos Washer With Window Lid

Catégorie: Machines à laver

Taper: Mode d'emploi

BRAVOS ®AUTOMATIC

USE & CARE GUIDE

WASHER

LAVEUSE AUTOMATIQU E

BRAVOS ®

GUIDE D'UTILISATION ET D'ENTRETIEN

FOR QUESTIONS ABOUT FEATURES, OPERATION/PERFORMANCE,

PARTS, ACCESSORIES OR SERVICE CAI.L: 1_800_688_9900

IN CANADA, CALL: 1_800_807_6777

VISIT OUR WEBSITE AI WWW.MAYTAG.COM

IN CANADA, WWW.MAYTAG.CA

AU CANADA, POUR ASSISTANCE, INSFAI.I.AFION OU SERVICE,

COMPOSER I.E : 1.800.807.6777

OU VISITER NOTRE SITE INTERNET ,_

WWW.MAYTAG.CA

PARA OBTENER ACCESO AI_ MANUAl_ DE USO Y CUIDADO EN ESPANOL, O PARA OBTENER INFORMACION ADICIONAL ACERCA DE SU PRODUCTO, VISITE: WWW.MAYTAG.COM.

TENGA I.ISTO SU NUMERO DE MOI)EIO COMPI.ETO. PODR, 4, ENCONTRAR El. NUMERO DE MOI)EIO Y DE SERIE EN I.A ETIQUETA UBICADA DEBAJO DE I.AFAPA DE I.A I.AVADORA.

W10092764A

TABLE OF CONTENTS

WASHER SAFETY ................................................................................................................. 3

INSTALILATION REQUIREMENTS ........................................................................................ 4

Tools and Parts .................................................................................................................. 4

Location Requirements ..................................................................................................... 5

Drain System .................................................................................................................... 6

Electrical Requirements ..................................................................................................... 6

INSTALLATION INSTRUCTIONS ......................................................................................... 7

Before YOu Start ................................................................................................................. 7

Remove Shipping Base and Packing Ring .......................................................................... 7

Connect Drain Hose ......................................................................................................... 8

Connect the Inlet Hoses .................................................................................................... 8

Secure the Drain Hose .................................................................................................... 10

[_eve[ the Washer ............................................................................................................ 10

Complete Installation ...................................................................................................... 11

BENEFITS AND FEATURES ................................................................................................. 11

Benefits ........................................................................................................................... 11

Features .......................................................................................................................... 12

WASHER USE ..................................................................................................................... 13

Starting Your Washer ....................................................................................................... 13

Pausing or Restarting the Washer ..................................................................................... 15

Stopping the Washer ....................................................................................................... 15

Changing Cycles, Modifiers, and Options ....................................................................... 15

Status Lights .................................................................................................................... 15

Cycles ............................................................................................................................. 15

Modifiers ........................................................................................................................ 17

Options ........................................................................................................................... 18

Operating Controls ......................................................................................................... 19

Normal Sounds ............................................................................................................... 19

[LAUNDRY T_PS .................................................................................................................. 19

WASHER CARE .................................................................................................................. 20

Cleaning Your Washer ..................................................................................................... 20

Water Inlet Hoses ........................................................................................................... 20

Vacation, Storage, and Moving Care ............................................................................... 20

TROUBLESHOOTING ....................................................................................................... 21

Washer and Components ................................................................................................ 21

Washer Operation ........................................................................................................... 23

Clothing Care .................................................................................................................. 24

ASSISTANCE OR SERVICE .................................................................................................. 26

In the U.S.A .................................................................................................................... 26

In Canada ....................................................................................................................... 26

Accessories ..................................................................................................................... 26

WARRANTY ....................................................................................................................... 27

TABLE DES MATIERES

SECUR_T[_ DE lLA lLAVEUSE ................................................................................................ 28

EXIGENcES D'INSTALLATION .......................................................................................... 29

Outillage et Pi6ces .......................................................................................................... 29

Exigences d'emplacement ............................................................................................... 30

Syst6me de vidange ........................................................................................................ 31

Sp6cifications 6[ectriques ................................................................................................ 31

INSTRUCTIONS D'INSTAILILATION ................................................................................... 32

Avant de commencer ...................................................................................................... 32

Retrait de [a base d'expddition et de ['anneau d'emballage ............................................. 33

Raccordement du tuyau de vidange ................................................................................ 33

Raccordement des tuyaux d'alimentation ........................................................................ 34

Immobilisation du tuyau de vidange ............................................................................... 3,5

R6glage de I'apIomb de la laveuse .................................................................................. 36

Achever ['installation ...................................................................................................... 37

AVANTAGES ET cARACTI_RISTIQUES ................................................................................ 37

Avantages ....................................................................................................................... 37

Caract6ristiques .............................................................................................................. 38

UTllLISATION DE LA LAVEUSE .......................................................................................... 39

Mise en marche de [a [aveuse ......................................................................................... 39

Pause ou remise en marche de [a [aveuse ........................................................................ 41

Arr6t de [a [aveuse .......................................................................................................... 41

Changement des programmes, modificateurs, et options ................................................. 41

T6moins [umineux ........................................................................................................... 41

Programmes .................................................................................................................... 42

Modificateurs .................................................................................................................. 44

Options ........................................................................................................................... 45

Fonctionnement des commandes .................................................................................... 45

Sons normaux ................................................................................................................. 46

CONSEllLS DE ILESSIVAGE .................................................................................................. 46

ENTRET_EN DE LA LAVEUSE .............................................................................................. 47

Nettoyage de la laveuse .................................................................................................. 47

Tuyaux d'arriv6e d'eau .................................................................................................... 47

Pr6cautions _ prendre avant [es vacances, un entreposage, ou un d6m6nagement .......... 47

DI_PANNAGE ..................................................................................................................... 48

[.a [aveuse et ses composants .......................................................................................... 48

Fonctionnement de [a [aveuse ......................................................................................... 50

Soin des v6tements ......................................................................................................... 52

ASSISTANCE OU SERVICE ................................................................................................. 54

Aux Etats-Unis ................................................................................................................ 54

Au Canada ...................................................................................................................... 54

Accessoires ..................................................................................................................... 54

GARANTIE ......................................................................................................................... 55

Your s_e_ a_ t_ s_ePt of others are verj impo_a_o

Pi"'i

iiiiiiiiiI

ii i!

.......!i......

iMPORTANT SAFETY iNSTRUCTiONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,

including the following:

[] Read all instructions before using the washer.

[] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline,

dry-cbaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or

explode.

[] Do not add gasoline, dry-charting solvents, or other

flammable, or explosive substances to the wash water.

These substances give off vapors that could ignite or

explode.

[] Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been

used for such a period, before using the washing

machine, turn on all hot water faucets and let the water

flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during

[]

Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is used

near children.

Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach into the washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where it will be exposed to

the weather.

[] Do not tamper with controls.

[] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user=repair instructions that you understand and

have the skills to carry out.

[] See "Electrical Requirements" for grounding instructions.

this time.

SAVE THESE iNSTRUCTiONS

iNSTALLATiON REOUIREMENTS

Gather the required tools and Parts before starting installation. The Parts suPPlied are in the

Washer basket.

Tools needed for connecting the drain hose and water inlet hoses:

[] Pliers that open to 1%G" (3.95 cm) [] Flashlight (optional)

NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record hose

installation or replacement dates for future reference.

Partssupplied:

B C D

A. Drain hose f(;m_

B. Water inlet hoses (2)

C. Hat water inlet hose washers (4)

D. Beaded tie strap

Tools needed for securing the drain hose and leveling the washer:

[] Adjustab[eor open end [] Wood block

wrench '¢lG"(14 mm) [] Ruler or measuring tape

[] [.eve[

Alternate parts

Your installation may require additional parts. If you are interested in purchasing one of the

items listed here, ca[[ the toll-free number on the cover or in the "Assistance or Service"

section.

ffYou Have: You Will Need to Buy:

Laundry tub or standpipe Sump pump system (if not already available)

taller than 96" (2.4 m)

1" (2.5 cm) diameter 2" (5 cm) diameter to 1" (2.5 cm) diameter standpipe

standpipe adapter, Part Number 3363920 and connector [<it, Part

Number 285835

Overhead sewer Standard 20 gal. (76 L) 39" (99.0 cm) tall drain tub or

utility sink, sump pump and connectors (available from

local plumbing suppliers)

Floor drain Siphon break, Part Number 285834; additional drain hose,

Part Number 8318155 and connector [<it,

Part Number 285835

Water faucets beyond reach 2 longer water fill hoses:

of fill hoses 6 ff (1.8 m), Part Number 76314,

10 ft (3.0 m), Part Number 350008

Lint dogged drain Drain protector, Part Number 367031

Selecting the proper location for your washer improves performance and minimizes noise and

possible washer "walk."

Your washer can be installed in a basement, laundry room, closet, or recessed area. See

"Drain System."

IMPORTANT: Do not install or store the washer where it will be exposed to the weather.

Proper installation is your responsibility.

You will need:

[] A water heater set to deliver 120°F (49°C) water to the washer.

[]

A grounded electrical outlet located within 4 ft (1.2 m) of where the power cord is

attached to the back of the washer. See "Electrical Requirements."

Hot and cold water faucets located within 3 ft (90 cm) of the hot and cold water fill valves,

and water pressure of 20-100 psi (138-690 kPa) for best performance.

A [eve[ floor with a maximum slope of 1" (2.5 cm) under entire washer. Installing the

washer on carpeting is not recommended.

Do not store or operate your washer in temperatures at or below 32°F (0°C). Some water can

remain in the washer and can cause damage in low temperatures. See "Washer Care" for

_HHHHH_

information on winterizing.

Installation spacing for recessed area and closet installations

The following spacing dimensions are recommended for this washer. This washer has been

tested for installation with spacing of 0" (0 cm) clearance on the sides. Recommended spacing

should be considered for the following reasons:

[] Additional spacing should be considered for ease of installation and servicing.

[] Additional spacing should be considered on all sides of the washer to reduce noise transfer.

[] For closet installation with a door, minimum ventilation openings in the top and bottom of

the door are required. Louvered doors with equivalent ventilation openings are acceptable.

[] Companion appliance spacing should also be considered.

17"*

(43.2cm)_

1" -.._JJ_- 2T/2'_1[__I" _[1"*[_ 27"...._5"*[_.-.

(2.5cm) --(69.9cm} ""(2.5cm)(2.5c_n)(68.6cm)'(12.7cm)

_,_ -2[- 3"*

_-_t[I,_"_rr_ax- [[ j (7.6cm}

24inY N i

/_._cm

A B C

A. Front view B. Side view C. Closet door with vents

*Required spacing

The washer can be installed using the standpipe drain system (floor or wail), the laundry tub

drain system, or the floor drain system. Select the drain hose installation method you need.

See "Tools and Parts."

Standpipe drain system--wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe of 2" (5.0 cm). The minimum

carry-away capacity can be no less than 17 gal. (64 I_)per minute. A 2" (5.0 cm) diameter to

1" (2.5 cm) diameter standpipe adapter kit is available. See "Tools and Parts."

The top of the standpipe must be at [east 39" (99.0 cm) high and no higher than

96" (244.0 cm) from the bottom of the washer.

-F-

(99cm)

A B

iLaundry tub drain system (view C)

The laundry tub needs a minimum 20 gal. (76 L) capacity. The top of the laundry tub must be

at least 39" (99.0 cm) above the floor and no higher than 96" (244.0 cm) from the bottom of

the washer.

Floor drain system (view D)

The floor drain system requires a siphon break that may be purchased separately. See "Tools

and Parts."

The siphon break must be a minimum of 28" (71.0 cm) from the bottom of the washer.

Additional hoses might be needed.

......... (728,,

[]

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A time-

delay fuse or circuit breaker is recommended. It is recommended that a separate circuit

serving only this appliance be provided.

This washer is equipped with a power supply cord having a 3 prong grounding plug.

To minimize possible shock hazard, the cord must be plugged into a mating, grounded

3 prong outlet, grounded in accordance with local codes and ordinances. If a mating

outlet is not available, it is the personal responsibility and obligation of the customer to

have the properly grounded outlet installed by a qualified electrician.

if codes permit and a separate ground wire is used, it is recommended that a qualified

electrician determine that the ground path is adequate.

Do not ground to a gas pipe.

[] Check with a qualified electrician if you are not sure the washer is properly grounded.

[] Do not have a fuse in the neutral or ground circuit.

GROUNDING iNSTRUCTiONS

For a grounded_ cord=connected washer:

This washer must be grounded. In the event of a malfunction

or breakdown, grounding wl[ reduce the risk of electrical

shock by providing a path of least resistance for electric

current. This washer is equipped with a cord having an

equipment=grounding conductor and a grounding plug. The

plug must be plugged into an appropriate outet that is

properly installed and grounded in accordance with al local

codes and ordinances.

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or serviceman if you are in

doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance - if it wl[

not fit the outlet, have a proper outlet installed by a qualified

electrician.

For a permanently connected washer:

This washer must be connected to a grounded metal,

permanent wiring system, or an equipment grounding

conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on

the appliance.

IMPORTANT:

[] Be sure the foam shipping base has been removed from the bottom of the washer as

directed in the Unpacking Instructions.

[] If foam shipping base has not been removed, be sure lid is secured with tape before laying

washer on its back.

[] Removing the foam shipping base is necessary for proper operation.

1. Place cardboard supports from shipping carton on floor behind washer for support.

2. Secure the lid with tape.

3. Using 2 or more people, tip the washer onto its back and place on cardboard supports.

4. Remove foam shipping base.

iiiiiiiiiI

ii i!

.......!i......

5. Set washer upright.

6. Remove tape from lid. Open lid and remove foam packing ring from washer tub.

Keep foam packing ring in case you need to move the washer in the future.

ili'',iii

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

NOTE: To avoid floor damage during installation, set the washer onto cardboard before

moving across floor.

Properconnectionofthedrainhoseprotectsyourfloorsfromdamageduetowaterleakage.

Readandfollowtheseinstructions.

The drain hose is connected to your washer and is stored inside the washer cabinet.

kaundry tub drain or standpipe drain

Connecting the drain hose form to the corrugated drain hose

)

Remove drain hose from washer cabinet

Pull the corrugated drain hose out of the washer by first grabbing the pull tie. Continue to

pull the hose until the end emerges. Do not force excess drain hose back into the rear of

the washer.

A. Drain hose relief._

1. Feed end of drain hose into one end of fom_. Place end of drain hose

fom_ into the drain hose relie£

2. Bend t/_e hose over the top of the fom_ and feed into the other end of

the form. Attach tl_e other end of the fom_ into the drain hose relie£

The hose must extend 4_//' ( 11.4 cm) beyond the form.

To keep drain water from going back into the washer:

[] Do not force excess drain hose into standpipe. Hose should be secure but loose enough

to provide a gap for air.

[] Do not lay excess hose on the bottom of the laundry tub.

Floor draln

Do not install the drain hose form onto the corrugated drain hose. You may need additional

parts. See Floor drain under "Tools and Parts."

Insert new flat washers (supplied) into each end of the inlet hoses. Firmly seat the washers

in the couplings.

A B

A. Coupling

B. Washer

Connect the inlet hoses to the water faucets

Make sure the washer basket is empty.

2. Attach the hose labeled hot to the hot water faucet. Screw on coupling by hand until it is

seated on the washer.

3. Attach the hose labeled cold to the cold water faucet. Screw on coupling by hand until it

is seated on the washer.

4. Using pliers, tighten the couplings with an additional two-thirds turn.

77ghten the couplings with an additional two-thirds turn.

NOTE: Do not over tighten or use tape or sealants on the valve. Damage to the valves

can result.

Clear the water lines

m Run water through both faucets and inlet hoses, into a laundry tub, drainpipe, or bucket,

to get rid of particles in the water lines that might clog the inlet valve screens.

[] Check the temperature of the water to make sure that the hot water hose is connected to

the hot water faucet and that the cold water hose is connected to the cold water faucet.

Connect the inlet hoses to the washer

f A B

.................. f

..................%'_'! ....if'i

A. Hot water inlet valve

B. Cold water inlet valve

Attach the hot water hose to the inlet valve labeled hot.

Attaching one hose coupling first makes it easier to tighten the connection with pliers.

Screw on coupling by hand until it is seated on the washer.

Using pliers, tighten the coupling an additional two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves

can result.

iiiiiiiiiI

ii i!

.......!i......

5. Attach the cold water hose to the inlet valve labeled cold.

6. Screw on coupling by hand until it is seated on the washer.

7. Using pliers, tighten the coupling an additional two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves

can result.

Check for leaks

I Turn on the water faucets and check for leaks. A small amount of water might enter the

washer. YOu will drain this in a later step.

NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record

hose installation or replacement dates for future reference.

m [f you connect only one water hose, you must cap off the remaining water inlet port.

m Periodically inspect and replace hoses if bulges, [<inks, cuts, wear, or leaks are found.

Drape the power cord over the console.

Remove any cardboard used to move washer.

Beaded tie .<rap

3. Fasten the drain hose to the laundry tub leg or drain standpipe with the beaded tie strap.

See view A or B.

If the washer faucets and the drain standpipe are recessed, put the formed end of the drain

hose into the standpipe. Tightly wrap the tie strap around the water inlet hoses and the

drain hose. See view C.

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

1. Slide the washer to its final location.

2. Push on upper front panel to be sure the washer is on its rear feet.

3. I.ower right front foot until it contacts the floor. By hand, firmly rotate foot as much as an

additional 1V2turns. The other three feet have been preset at the factory.

4. Check the levelness of the washer by first placing a level on the lid near the console.

level the #ont.

One washer foot has been installed at a different height on your new washer. The other

three feet were preset at the factory. Properly leveling your washer will minimize noise

and vibration.

Next, place the level on the side of the washer in the crease between the top of the

washer and the cabinet.

level the side.

6. If the washer is not [eve[, move the washer out slightly, tip back, prop up the front of the

washer on a wood block. Adjust the feet up or down as necessary by twisting the feet.

Repeat steps 1 through 5 until washer is [eve[.

7. Use a %_/' or 14 mm open-end wrench to turn the [ocknut counterclockwise on the foot

tightly against the washer cabinet.

IMPORTANT: If the [ocknut is not tight against the washer cabinet, the washer may

vibrate.

Co !iiii:::i !i!iiit ¸ iiiH i:,iii:ii iiiiiiiiiiiiilia:iiiii:iii i o

1. Check the electrical requirements. Be sure that you have the correct electrical supply and

the recommended grounding method. See "Electrical Requirements."

2. Check that all parts are now installed. If there is an extra part, go back through the steps

to see which step was skipped.

3. Check that you have all of your tools.

4. Keep the foam packing ring from the washer tub for future relocation of the washer.

Dispose of/recycle all packaging materials.

5. Check that the water faucets are on.

6. Check for leaks around faucets and inlet hoses.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

7. Plug into a grounded 3 prong outlet.

8. Remove any protective film or tape remaining on the washer. .......

9. Read "Washer Use."

10. To test and to clean your washer, measure 1/2of the detergent manufacturer's ....

recommended amount of High Efficiency (HE) powdered or liquid detergent for a medium-

size load and pour it into the detergent dispenser. Close the lid. Press

POWER/CANCEl_. Select a normal cycle and press START/PAUSE. Allow it to complete

one whole cycle.

BENEFITS AND FEATURES

Your washer has several benefits and features which are summarized here. Some items may

not apply to your model.

High-Effidency Wash System

Your new top loading, high-efficiency washer saves you time by allowing you to do fewer,

larger loads. It also conserves resources and lowers your water and energy bills by using the

following innovations.

INTELLIFILL TM Water Level Control

This washer senses the load size and composition through a series of fills and wash motion.

It then adjusts the water [eve[ for the best cleaning and rinsing performance. It eliminates the

guesswork. The water level is just right for every wash load size.

NOTE: You may notice during a cycle that the wash load is not completely submerged in

water. This is normal for your washer.

Auto Temperature Control

The Auto Temperature Control system on this washer electronically senses and maintains

a uniform water temperature by regulating incoming water temperatures. Using Auto

Temperature Control will help dissolve detergent,

Washer impeller System

Your new washer works differently than most washers that you may be accustomed to. The

most striking difference is that the washer has a washer impeller system, it uses this new

innovative washer impeller at the bottom of the wash basket to move your load through a

mixture of water and detergent. The load is moved from the outside toward the middle with

items coming up in the center and down on the outside edges.

Dispensers

The dispensers make your washer truly automatic. It is unnecessary for you to return to the

washer during the cycle to add detergent, bleach, fabric softener, laundry boosters, or oxi.

].aundry products are added to the load at the proper time in the wash cycle.

Spin Speeds

This washer is preset to automatically select the spin speed based on the cycle selected.

Depending on your wash load, you can change the preset speeds. The spin speed on this

washer is nearly twice as fast as that of a conventional washer. YOU may notice different

sounds during a spin cycle because of this higher speed.

Clean Boost with Heater

The Clean Boost with Heater option helps to ensure better soil and stain removal. Clean Boost

with Heater uses the heater within the washer to maintain the selected temperature setting

throughout the wash period. This option will add some additional time to the cycle based on

which temperature is selected. Clean Boost with Heater reduces the need for pretreatment and

is safe for all fabrics.

High Efficiency (HE) Detergent

This washer is designed for High Efficiency (HE) detergent use only. HE detergents are made to

produce the right amount of suds and give the best performance in low water wash systems.

Innovative Features

Your new washer includes these features that help to reduce noise, increase the ease of use,

and improve wash performance.

E[ectronlc Controls

Electronic controls with preset cycles are easy to use whether you are a beginner or an

"expert."

Qulet Operation

This washer is insulated with sound-dampening materials to reduce washer operation sounds

and noises.

Suspenslon System

To reduce washer "vibration," "walk," and "out of balance" conditions, your new washer

combines:

I 4 Spring damper struts to isolate vibration

Balance ring at the top and bottom of the wash basket to minimize vibration

Operating software designed to sense and correct off-balance loads

Clean Washer with AFFRi--'SH TM Cycle

This washer features an easy-to-use Clean Washer with AFFRESH T'_cycle that thoroughly

cleans the inside of your washing machine using higher water volumes in combination with

AFFRESH _'* washer cleaner or liquid chlorine bleach. The use of AFFRESW' washer cleaner or

liquid chlorine bleach with this cycle, will remove and help avoid odor-causing residue.

Stalnless Steel Basket

The stainless steel basket is corrosion resistant and enables higher spin speeds for more water

extraction, reducing drying time.

Self-clean Wash and Rinse Filter System

This washer filters 100% of the wash and rinse water. The water is filtered then recircu[ated.

The force filter traps sand and dirt, flushing them down the drain, so they are not redeposited

onto the clean clothes.

Delay Start

Delay Start allows you to load your washer and pause the start of the cycle for up to 10 hours.

End Signal - Off - ILow - Hi

The End Signal produces an audible sound when the wash cycle is finished. This signal is

helpful when you are removing items from the washer assoon as it stops.

Water Save Spray Rinse

This washer is designed to have the option of saving water by using a spray rinse instead of a

deep water rinse. This option is the default setting on some cycles. The option is selectable on

other cycles. When using fabric softener, always select the Fabric Softener button, or select

Extra Rinse; both of these options will dispense fabric softener in a deep rinse.

Sanitary with Oxl Cycle

This washer is NSF certified to eliminate 99.9% of bacteria when used in conjunction with the

Oxi Treat Stains option. To achieve NSF sanitization, set the washer on the Sanitary cycle. Be

sure to add an oxygen based stain fighter.

WASHER USE

estimated time remaining

MAYI_AG

delay =1=

start

delay fil wash rinse spin done

W heating M add a garment

III dean washer reminder

BFIAV06 quiet series4oo

modifiers

E cold W coot m warm R warm W hot wash temp

cold warm cold

sheets normal wrinkle control cold cold auto temperature control--

__a -- _...............

bu[ rks/colors Imno m[ow llm medium Wmax

spin extract

whites// f/ _ _\rapid

super_| |I I_ |_hand

reminder rinse asher fabric

Ill &s_

wilh ai_@ lid lock

NOTE: Your washer model may vary from the model shown.

Fire Hazard

Never place items in the washer that are dampened

with gasoline or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on

it (including cooking oils).

Doing so can result in death, explosion, or fire.

I Your Maytag Washer is equipped with an "Auto Wake-up" feature. Press any button

or open and close the washer lid, and the display will illuminate. The washer will

automatically shut down if a cycle is not selected and started right away.

m Your Maytag Washer will memorize and save all options and modifiers that have been

changed during setting mode (exceptions apply to options for Super Wash, Rapid Wash,

and Normal cycles. They will default back to factory default settings.)

Using the Proper Detergent

Use only High Efficiency detergents. The package for this type of detergent will be marked

"HE" or "High Efficiency." This wash system, along with less water, will create too much

sudsing with a regular non-HE detergent. Using regular detergent will likely result in washer

errors, longer cycle times, and reduced rinsing performance. It may also result in component

failures and noticeable mold or mildew. HE detergents are made to produce the right amount

of suds for the best performance. Follow the manufacturer's instructions to determine the

amount of detergent to use. Remember, concentrated detergents such as 2x or higher will use

less detergent based on load size.

iiiiiiiI

ii i!

_i,,i;¢i:i

.......!i......

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the

IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.

The following is a guide to starting your washer. Periodic references to other sections of this

manual provide more detailed information.

Place a load of sorted clothes into the washer. See "Laundry Tips."

[] Load evenly to maintain washer balance. Mix large and small items. Items should

move easily through the wash water.

[] Load only to the top of the basket as shown. Overloading can cause poor cleaning.

Items need to move easily through the wash water.

_____.__--------,

Pour measured powdered or liquid High Efficiency (HE) detergent into the High Efficiency

detergent dispenser. Always use the detergent dispenser, and do not put detergent directly

onto clothes in the washer.

Add laundry boosters (powdered or liquid) into the Oxi Treat Stains dispenser, if needed.

Laundry boosters are automatically dispensed at the proper time during the wash cycle.

Do not mix laundry boosters and chlorine bleach in the same cycle. Be sure to select Oxi

Treat Stains from the options to assure proper dispensing.

Pour measured liquid chlorine bleach into the liquid bleach dispenser, if needed.

Bleach is diluted and automatically dispensed at the proper time during the wash cycle.

[] Do not overfill. Do not dilute. [Do not use more than 1 cup (250 m[.) for a fuji load.

Use less with a smaller load size.

[] Follow the garment and the chlorine bleach manufacturer's directions for proper use.

[] To avoid spilling, use a cup with a pouring spout. Do not let bleach splash, drip,

or run down into the washer basket.

[] At the end of the cycle, a small amount of water may be left in the dispenser.

This is normal.

NOTE: Use only liquid chlorine bleach in this dispenser.

Pour measured liquid fabric softener into the fabric softener dispenser, if desired.

[] If you are using fabric softener, be sure to select Fabric Softener from the options to

assure proper dispensing.

[] Do not overfill. Do not dilute. The dispenser holds 3 oz (94 m[.), or a capful

of fabric softener.

[] Fabric softener is dispensed in a deep rinse when the Fabric Softener option is selected.

If Extra Rinse is selected, the fabric softener will be dispensed during the final rinse.

[] Do not use fabric softener dispensing balls in this washer. Dispensing balls will not

operate correctly with this washer.

[] Do not spill or drip any fabric softener onto the clothes.

[] At the end of the cycle, a small amount of water may be [eft in the dispenser.

This is normal.

NOTE: Use only liquid fabric softener in this dispenser.

6. Close the washer lid.

7. Select a Wash Cycle. See "Cycles."

8. Select the desired Modifiers. See "Modifiers."

9. Select an Option, if desired. See "Options." Select Fabric Softener or Extra Rinse option

if you are using liquid fabric softener.

10. Select Delay Start, if desired. See "Delay Start" in the "Modifiers" section.

11. Press START/PAUSE. The wash cycle begins, and the display shows the estimated

remaining time. The lid wi[[ lock.

NOTE: If you do not press Start/Pause within 5 minutes of pressing Power/Cancel, the

washer automatically shuts off.

iii::_',_:_i:_i_!!!!!i_iii_i_ij,_:_i_i_:ii!!__ii_,_F_i_¸¸¸,_¸!iiii:ii_:_:!_!!!iii_;Lii!_i_i_i_i_i,,ili_i_i_ii,_i_i_i_:ii!!_i::!l_i_i_i_i:!_¸'_i¢)i,_i!i_j_!!!ii;is_i:_i_.......

Add a Garment

YOU can place additional clothing in the wash when the "Add a Garment" status light is

glowing without sacrificing wash performance.

To add a garment or pause the washer at any time

1. Press START/PAUSE once.

2. Wait until the Lid Lock light turns off, then open the lid.

3. Add items.

To restart the washer

1. Close the lid and press START/PAUSE.

2. To unlock the lid after the Add a Garment period, press START/PAUSE once. Pressing

POWER/CANCEl. will cancel the wash cycle.

::!iiiil!io!::_i:ii_ii_iii_ii_i¸_i_i_i!iii!!il_i:i_i__i:!¸VV_ii!__!:iii;i!3__i:!_¸_i_.....

YOU can stop the wash cycle and drain the tub by pressing the Power/Cancel button once.

(]iiilis_:iii!i_i_i_i:i_!ii_!ilL_i!i;ii::iiiil)),_::ii_i:!_!!iii;,,_A_o_::!i_ii:iiiiiiii_i:!_i_%,_:_i_i_i:_/::i(iil)ii:3!il:iiiiiii,o_3_!!!iii_

YOu can change Cycles, Modifiers, and Options anytime before Start/Pause is pressed. Not all

Modifiers and Options are available for all cycles.

I A short tone sounds when a change is selected. If you press and hold the End Signal option

for more than five seconds, all valid beeps will be eliminated. To turn the signals back on,

press and hold the End Signal button for five seconds.

Three short tones sound if an unavailable combination is selected. The last selection will

not be accepted.

To return all options and modifiers to Factory Default, press POWER/CANCEL, select

Drain & Spin cycle, and then press Extra Rinse, Fabric Softener, Extra Rinse, or Fabric

Softener within 5 seconds. When done correctly, the 7-segment displays show "Fd" for

3 seconds and then unit returns to Standby Mode.

Changlng Cydes after presslng Start

1. Press POWER/CANCEl_ once to cancel the cycle. The washer will (]rain.

2. Select the desired wash cycle.

3. Select the desired Modifiers and Options.

4. Press START/PAUSE.

The washer restarts at the beginning of the new cycle.

NOTE: If you do not press Start/Pause within 5 minutes of pausing the washer, the washer

automatically shuts off.

Changlng Modifiers and Options after presslng Start/Pause

You can change a Modifier or Option anytime before the selected Modifier or Option begins

by choosing the desired Modifiers and/or Options.

NOTE: An error tone will sound if your selection is unavailable.

To manually draln the washer and spln the load

1. Press POWER/CANCEL once to cancel the wash cycle and drain the washer.

2. Turn knob to select DRAIN & SPIN.

3. Press START/PAUSE.

When the spin is complete, the lid unlocks. Items can be removed from the washer.

,ii,•}i_

These lights show which portion of the cycle is operating. They also indicate when you can

add other garments to the wash load.

delay fill wash rinse spin done

heating _ add a garment

dean washer reminder

Indlcator lights

An indicator light shows which Cycle, Modifiers, and Options you have selected.

Estimated Time Remainlng

When a wash cycle is started, the estimated time remaining for the cycle, including fills and

drains, will be displayed. The time will count down to the end of the cycle.

estimatedtime remaining

Turn the knob to choose the correct wash cycle for the type of fabrics you are washing. When

the knob points to a cycle, the cycle and Start/Pause indicator lights will blink. If the default

settings for the Modifiers and Options are acceptable, you may press Start/Pause to begin the

wash cycle.

, . normal .....

srlee_l rl Kle con_ro_

whites/f /_ _N _\rapid

I! // \\

super[| II II |l hand

wash _ _k Jl 1 2.

sanitary\_ \\ // Jr

wtth°=]L__X_.-_.--/y /

_n washer

soa k with Nr_SII

.......!i......

SanitarywithOxi

SuperWash

Whites

Bulky

Sheets

Normal

Wrinkle Control

Darks/Colors

Rapid Wash

Hand Wash

Clean Washer

with AFFRESH TM

Soak

Rinse & Spin

Drain & Spin

1:43 Extra Heavy Hot/Cold

1:31 Extra Heavy Hot/Cold

1:19 Extra Heavy Hot/Cold

0:52 Heavy Warm/Cold

0:49 Heavy Warm/Cold

0:41 Heavy Warm/Cold

0:44 Medium Warm/Cold

0:45 Heavy Warm/Cold

0:33 Light Warm M!arm

0:36 Light Cool/Cold

1:01 Not applicable Not applicable

0:31 Light Cool/Cold

0:24 Not applicable Cool/Cold

0:14 Not applicable Not applicable

*These times are for reference only and may not match your mode[ exactly.

**Cycle time in hour and minutes will appear in the display while you are malting selections.

The total cycle time will appear, including an estimated time for drain and fill times, once

Start/Pause is pressed.

NOTE: Load only to the top of the baskeL Overloading can cause poor cleaning. See "Starting

Your Washer."

IMPORTANT: When washing waterproof/water-resistant items such as plastic lined mattress

pads, shower curtains, tarps, jackets, or sleeping bags, select the lowest spin speed setting

available for the cycle and washer mode[ being used.

Sanitary with Oxi

Use this cycle to eliminate 99.9% of bacteria when used in conjunction with the Stain Boost

with Heater cycle. Presetcycle setting must be used to achieve the proper sanitization. Be

sure to add an oxygen based stain fighter or color safe bleach.

Super Wash

Use this cycle for heavily soiled or sturdy items. Cycle combines high-speed wash action and

high-speed spin. Stain Boost with Heater cycle is the default option for the wash cycle, but it

can be turned off. See "Changing Cycles, Modifiers, and Options." A Water Save Spray Rinse

is a preset cycle setting for this cycle.

Whites

This cycle introduces liquid chlorine bleach to the load at the proper time for improved

whitening of your heavily soiled white fabrics. This cycle combines high-speed wash action

and high-speed spin speed. For maximum soil and stain removal, liquid chlorine bleach can

be used in the liquid bleach dispenser or color safe bleach, laundry boosters, or oxi in the Oxi

Treat Stains dispenser. Cycle can also be used for sturdy color fabrics such as towels without

liquid chlorine bleach.

Bulky

Use this cycle to wash large items such as comforters, sleeping bags, and blankets. This cycle

starts with a soak to thoroughly saturate your large load. This is followed by medium wash

action and medium spin speeds to maintain load balance.

Sheets

Use this cycle for sheets, pillowcases, and light blankets or throws. The wash action of this

cycle is designed to keep large items from tangling and bailing up.

IMPORTANT: For best performance, drop items in loose heaps evenly around the basket wall.

Do not load items directly on the impeller for this cycle.

Normal

Use this cycle for normally soiled cottons and mixed fabric loads. This cycle combines high-

speed wash action and medium-speed spin. A Water Save Spray Rinse is a preset cycle setting

for this cycle.

When washing waterproof/water-resistant items such as plastic lined mattress pads, shower

curtains, tarps, jackets, or sleeping bags, select the lowest spin speed setting available for the

cycle and washer mode[ being used.

Wrinkle Control

Use this cycle to wash loads of no-iron fabrics such as sport shirts, blouses, casual business

clothes, permanent press, and blends. This cycle uses medium-speed wash action, a low-

speed spin, and a coo[ down process to help reduce wrinkling.

Darks/Colors

Use this cycle for lightly soiled, colored clothing or towels. This cycle uses medium-speed

wash action and medium-speed spin.

Rapid Wash

Use this cycle to wash small, lightly soiled loads that are needed in a hurry. This short cycle

combines high-speed wash action and high-speed spin for the optima[ cleaning and shortened

dry times. A Water Save Spray Rinse is a preset cycle setting for this cycle.

Hand Wash

This cycle combines low-speed wash and low-speed spin action to clean items labeled as

"Machine Washable" on the garment care [abe[. Pre Soak and Deep Clean options are not

available in this cycle.

Clean Washer with AFFRESH TM

Use the Clean Washer with AFFRESHT'_cycle once a month to keep the inside of your washer

fresh and clean. This cycle uses a higher water level. Use with AFFRESH_'washer cleaner

tablet or liquid chlorine bleach to thoroughly clean the inside of your washing machine. This

cycle should not be interrupted. See"Cleaning Your Washer."

IMPORTANT: Do not place garments or other items in the washer during the Clean Washer

with AFFRESH_'_cycle. Use this cycle with an empty wash tub.

Soak

This cycle is preset for a 31-minute cycle and soak time can be adjusted according to your

needs by selecting Soil Level. After the selected soak period has ended, the washer wi[[ drain

but does not spin the load. At the end of Soak, the washer wi[[ drain and wait for a wash cycle

to be selected, to complete the cleaning process.

NOTE: Automatic bleach dispensing is not part of the soak cycle.

Rinse & Spin

Use this option to get a deep rinse followed by a high-speed spin, The time display will

include an estimate of how long it will take to fill and drain the washer.

When to use RINSE & SPIN:

[] For loads that need rinsing only.

[] For completing a cycle after the power has been off. The machine wi[[ return to pause

mode if the power was interrupted or unplugged while cycle was running.

Drain & Spin

Drain & Spin may help shorten drying times for some heavy fabrics or special-care items.

Drain & Spin may also be used for draining the washer after canceling a cycle or completing

a cycle after a power failure.

Modifiers allow you to further customize your cycles and save energy.

modifiers

II cold I! cool

cold cold

m no

spin

@ light

mwarm II warm B hot wash temp

cold warm cold rinse temp

auto temperature control

II low II medium III max [ spin speed

extract

II medium III heavy II extra r soil level

heavy

]

Wash Temp/Rinse Temp

Select a water temperature based on the type of load you are washing. Use the warmest wash

water safe for fabrics. Follow garment [abe[ instructions.

Warm rinses leave the loads drier and more comfortable to handle than cold rinses. However,

warm rinses also increase wrinkling. Cold rinses may help with wrinkling and save energy.

Temperature Guide

Wash Water Temperature Suggested Fabrics

Hot Whites and pastels

Warm Bright colors

Cold Colors that bleed or fade

NOTE: In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well.

Soils may be difficult to remove.

Spin Speed

This washer automatically selects the spin speed based on the cycle selected. The preset

speeds can be changed. Spin speeds may vary by cycle.

Sol[ Level

Soil I_eve[ (wash time) is preset for each wash cycle. See "Preset Cycle Settings" in "Cycles."

As you press the Soil I_eve[ pad, the cycle time will increase or decrease in the Estimated Time

Remaining display and a different wash time will appear. To get the minimum wash time,

press the pad until the indicator light next to Light illuminates. This is the shortest wash time

available for that cycle with the wash options selected.

[] For most loads, use the time recommended in the preset cycle settings.

[] For heavy soil and sturdy fabrics, press Soil I.eve[ to select more wash time, if needed.

[] For light soil and delicate fabrics, press Soil I.eve[ to select less wash time, if needed.

iiiiiiiiiI

ii i!

.......!i......

Auto Temperature Control

Auto Temperature Control (ATC) electronically senses and maintains a uniform wash and rinse

water temperature. ATC regulates incoming hot and cold water. The ATC is automatically

turned On when a cycle is selected. (See "Preset Cycle Settings" in "Cycles.")

ATC is available with Warm/Warm, Warm/Cold, and Cool/Cold settings. The water

temperature in the Hot/Cold and Cold/Cold settings depends on the water temperature at the

water inlet faucets.

[] ATC ensures consistent cleaning.

[] Heated water consumes the largest amount of energy that a washer uses.

[] Today's detergents work well at temperatures above 60°F (15.6°C).

Delay Start

YOU can use the Delay Start feature to delay the start of a wash cycle for up to 10 hours

(depending on your model).

1. [.oad the washer and fi[[ the dispensers.

2. Close the washer lid.

3. Press POWER/CANCEl ....

4. Select the desired Cycle, Modifiers, and Options. Delay Start not valid for Drain & Spin

cycle.

5. Press + (plus) DELAY START. 1H (one hour) wi[[ be displayed in the time display window.

The indicator light for Delay wi[[ glow.

m delay _.,

start

For a longer delay time, press DELAY START + (plus). For a shorter delay time, press

DELAY START - (minus). The Start time will increase or decrease by 1-hour steps.

Press START/PAUSE. The countdown in hours and minutes to the wash cycle will show

in the time display window and the indicator light will begin to flash.

NOTE: The Start/Pause indicator light will not flash when Delay Start is chosen. You must

press Start/Pause to initiate a countdown for the cycle to begin. The cycle selections and

modifiers are lit during the Delay Start time.

To cancel Delay Start:

Press POWER/CANCEl_ once to cancel Delay Start or press START/PAUSE to cancel the

countdown and start the cycle.

Use these pads to select or dese[ect the options for your wash cycle. Options may add time

to the wash cycle.

options

Water save 1

spray rinse

fabric 1

softener

oxi treat 1

stains

extra rinse i

clean boost 1

with heater

end signal 1

off- low- hi

Water Save Spray Rinse

The Water Save Spray Rinse option reduces rinse water in the cycle. This option is available

on most cycles and must be selected prior to the start of the cycle. Do not use liquid fabric

softener with the Water Save Spray Rinse option. Select the Fabric Softener option if using

liquid fabric softener to assure proper dispensing.

Oxl Treat Stains

This washer is designed to dispense laundry boosters such as oxygenated stain treaters and

color-safe bleach at the right time in the cycle for best cleaning performance. Do not use

laundry boosters and chlorine bleach in the same cycle.

Clean Boost with Heater

The Clean Boost with Heater option helps to ensure better soil and stain removal. Clean

Boost uses a heater within the washer to maintain the selected temperature setting throughout

the wash period. This option will add some additional time to the cycle based on which

temperature is selected. It is a preset cycle setting on the Sanitary and Super Wash cycles.

Clean Boost with Heater may be selected as an option with other cycles. See table for details.

Cycle Clean Boost with Heater

Sanitary with Oxi Default

Super Wash Default

Whites O _tion

Bulky O _tion

Sheets O _tion

Normal O _tion

Wrinkle Control O _tion

Darks/Colors O _tion

Rapid Wash O _tion

Hand Wash O _tion

Clean Washer with AFFRESH'" Not available

Soak Not available

Rinse & Spin Not available

Drain & Spin Not available

Fabric Softener

Fabric- Softener option must be selected if liquid fabric- softener is added to the fabric- softener

dispenser. Fabric softener wii[ also be dispensed in the last rinse of the Extra Rinse cycle, if

selected. This option flushes the dispenser at the correct time in a deep water rinse for optima[

distribution.

Extra Rinse

An Extra Rinse can be used to aid in the removal of detergent or bleach residue, or particulates

such as sand and lint, from the load. This option provides an additional rinse with the same

water temperature as the first rinse. This is the default rinse setting for the Whites cycle.

End Signal - Off - Low - Hi Cycle Volume

The End Signal produces an audible sound when the wash cycle is finished. This signal is

helpful when you are removing items from the washer as soon as it stops. Select Off, Low,

or Hi for volume sound.

power

caacel start

pause

lid lock

POWER/CANCEL

PressPOWER/CANCEl_ to turn the washer on or off.

START/PAUSE

Press START/PAUSE to start your washer after a cycle has been selected. Be sure all desired

Modifiers and Options have been selected. Press START/PAUSE once to unlock the lid and

add a garment. Press START/PAUSE to complete the cycle from where it was stopped. The

lid must be closed for the washer to start. Press POWER/CANCEl. to stop the wash cycle.

The washer will then drain and turn off.

Lid Lock

When the lad I_ock status light glows, the washer lid is locked. The lid must be closed for the

washer to Start.

NOTE: YOu must wait until the Lid Lock Light turns off before the lid can be opened.

Your new washer may make sounds your old one didn't. Because the sounds might be

unfamiliar, you may be concerned about them. These sounds are normal.

During washing

YOu will hear spin/spray noise throughout the cycle.

During draln

If water is drained quickly from your washer (depending on your installation), you may hear

air being pulled through the pump during the end of draining.

During wash and spin

This washer does not have a transmission. The motor provides direct drive for agitation and

spin. You will hear sounds that are different from those of a conventional washer.

Preparing clothes for washing

Follow these recommendations to help you prolong the lifeof your garments.

Use only High Efficiency detergents. The package for this type of detergent will be marked

"HE" or "High Efficiency." This wash system, along with less water, will create too much

sudsing with a regular non-HE detergent. Using regular detergent will likely result in

washer errors, longer cycle times, and reduced rinsing performance. It may also result in

component failures and noticeable mold or mildew. HE detergents are made to produce

the right amount of suds for the best performance. Follow the manufacturer's instructions

to determine the amount of detergent to use. Remember, concentrated detergents such as

2x or higher will use less detergent based on load size.

iiiiiiiiiI

ii i!

%¢}

.......!i......

[] Treat spots and stains.

[] Stained or wet garments should be washed promptly for best results.

[] Turn wool and knits inside out before washing.

U._e only "HE" High Efficiency detergent.

Close zippers, snaps, and hooks to avoid snagging other items. Remove pins, buckles,

and other hard objects to avoid scratching the washer interior. Remove non-washable trim

and ornaments.

Empty pockets and turn them inside out.

Sorting

[] Separate heavily soiled items from lightly soiled ones, even if they would normally

be washed together. Separate lint-givers (towels, chenille) from lint-takers (corduroy,

synthetics, permanent press). When possible, turn lint-givers inside out.

[]

Separate dark colors from light colors, colorfast items from noncolorfast items.

Sort by fabric and construction (sturdy cottons, knits, de[kate items).

Separate bulky, nonabsorbent items such as comforters, pillows, and poly-filled jackets.

Use the Bulky cycle for these items.

Separate sheets, pillowcases, and light blankets or throws and use the Sheets cycle for

these items. For best performance, drop items in loose heaps evenly around the basket

wall and do not load items directly on the impeller for this cycle.

[]

[] Turn down cuffs; brush away lint and dirt. Unloading

[] Turn synthetic [<nits inside out to avoid pilling. [] Remove clothes from washer after the cycle is completed. Metal objects such as zippers,

snaps, and buckles may rust if left in the washer basket for a long time.

[] Tie strings and sashes so they will not tangle.

[] Mend tears, loose hems, and seams.

119

When washing waterproof/water-resistant items such as plastic lined mattress pads, shower

curtains, tarps, jackets, or sleeping bags, select the lowest spin speed setting available for

the cycle and washer model being used.

WASHER CARE

Washer Maintenance Procedure

Cleaning the exterior

Use a soft damp cloth or sponge to wipe up any spills. Occasionally wipe the outside of your

washer to keep it looking new. Use mild soap and water. Do not use abrasive products.

This washer has a special cycle that uses higher water volumes, in combination with

AFFRESH _''_washer cleaner or liquid chlorine bleach to thoroughly clean the inside

of the washer.

NOTES:

'_ii_i_i,,ii_i!i_!!ii:_ii!!!:_i_i:'_iiiii_i?_i_iiiii_i!!i;_!:!iiiiilO_!!!i;_ii!!_!_!!ii;

Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect

and replace inlet hoses if bulges, kinks, cuts, wear, or leaks are found.

[]

Read these instructions completely before beginning the cleaning process.

After every 45 cycles, the Clean Washer Reminder status light glows. Light can be

deactivated by running the Clean Washer with AFFRESH _''*cycle or you can press the

Reminder Reset button and start the Clean Washer Reminder cycle count over again.

It is recommended that you allow the cleanout cycle to complete without interruptions. If

necessary, the c[eanout cycle may be cancelled by pressing the Power/Cancel button once.

IMPORTANT: If the cleanout cycle is cancelled, run a Rinse & Spin cycle to ensure that all

remaining washer cleaner or bleach is rinsed from the washer.

When replacing your inlet hoses, marl< the date of replacement on the label with a permanent

marker.

Install and store your washer where it will not freeze. Because some water may stay in the

hoses, freezing can damage your washer. If storing or moving your washer during freezing

weather, winterize it.

Non-use or vacation care:

Begin procedure

1. Open the washer lid and remove any clothing or items from the washer.

2. Using the AFFRESH rm washer cleaner (Recommended):

Add one AFFRESH _'_washer cleaner tablet to the washer basket.

If using liquid chlorine bleach:

Add 1 cup (250 m[.) liquid chlorine bleach to the bleach dispenser.

NOTE: Do not add any detergent or load to this cleaning cycle. Use of more than

1 cup (250 m[.) of bleach will cause product damage over time.

3. Close the lid.

4. Turn Cycle Control knob to Clean Washer with AFFRESH _'* cycle.

[] The Estimated Time Remaining display will show approximately 1:02.

5. Press START/PAUSE.

[] The cycle will begin and water will dispense in the washer for a moment and pause,

then the lid will lock and the cycle will continue.

[] Once the cleaning cycle has begun, allow the cycle to complete. An estimated cycle

time will appear on the display.

Operate your washer only when you are at home. If you will be on vacation or not using your

washer for an extended period of time, you should:

[] Unplug washer or disconnect power.

[] Turn off the water supply to the washer. This helps avoid unintended flooding (due

to a water pressure surge) while you are away.

To wlnterize washer:

1. Shut off both water faucets.

2. Disconnect and drain water inlet hoses.

3. Put 1 qt (1 L) of R.V.-type antifreeze in the basket.

4. Run washer on the Rinse & Spin setting for about 30 seconds to mix the antifreeze and

remaining water.

5. Unplug washer or disconnect power.

Always do the foI[owlng to malntaln washer freshness

[] Use only High Efficiency (HE) detergent when washing a clothes load.

[] Repeat the cleaning procedure monthly, using one AFFRESH _'* clean washer tablet

or 1 cup (250 m[.) of liquid chlorine bleach.

[] If the procedure does not sufficiently improve washer freshness, evaluate your

installation and usage conditions for other causes.

La page charge ...

Maytag MVWB800VQ - Bravos Washer With Window Lid Mode d'emploi

Marque: Maytag

Modèle: MVWB800VQ - Bravos Washer With Window Lid

Catégorie: Machines à laver

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Maytag MVWB800VQ - Bravos Washer With Window Lid User guide

Documents connexes

Autres documents

Whirlpool Cabrio W10240441C - SP Manuel utilisateur