Dell W-IAP274/275 Mode d'emploi

Marque: Dell

Modèle: W-IAP274/275

Catégorie: Points d'accès WLAN

Taper: Mode d'emploi

Dell Networking W-IAP270 Series Outdoor Instant Access Point

Installation Guide

0511607-02 | August 2014 1

The Dell W-IAP274 and W-IAP275 Instant Access Point (IAP) are environmentally hardened, outdoor rated,

dual-radio IEEE 802.11ac wireless access points (AP). These Instant access points use MIMO (Multiple-Input,

Multiple-Output) technology and other high-throughput mode techniques to deliver high-performance, 802.11ac

2.4 GHz and 5 GHz functionality while simultaneously supporting existing 802.11a/b/g/n wireless services.

W-IAP270 Series Operations

 Wireless transceiver

 Wireless Instant access point (IEEE 802.11 a/b/g/n/ac)

 Wireless air monitor (IEEE 802.11 a/b/g/n/ac)

 Protocol-independent networking functionality

 Compatibility with IEEE 802.3at PoE

Guide Overview

 “W-IAP270 Series Hardware Overview” on page3 provides a detailed hardware overview of the W-IAP274

and W-IAP275 Instant access points.

 “Before You Begin” on page8 provides key questions to ask and items to consider when deploying an outdoor

wireless network.

 “Installing the IAP” on page9 describes the multi-step process for successful installation and deployment of

the W-IAP274 and W-IAP275 Instant access points.

 “Safety and Regulatory Compliance” on page13 provides an overview of safety and regulatory compliance

information.

Package Contents

 W-IAP274 or W-IAP275 Instant Access Point

 Cable Glands x2

 Copper Lug x1

 M4x6 Screw x1

 USB Console Cable

 Installation Guide (this document)

 Professional Installation Guide Supplement (included with W-IAP274 only)

 Quick Start Guide

 Dell Safety, Environmental, and Regulatory Information

 Dell Software License Agreement

 Dell Warranty and Support Information

NOTE: The W-IAP270 Series Instant access point requires Dell Instant 4.1 or later.

2 Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide

NOTE: The weatherproof caps for Ethernet, Console, and power interfaces are connected to the IAP in the package.

NOTE: Mounting kits for use with the W-IAP270 Series Instant access points are sold separately. Contact your Dell sales

representative for details.

NOTE: Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including the

original packing materials. Use these materials to repack and return the unit to the supplier if needed.

Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide 3

W-IAP270 Series Hardware Overview

Figure 1

W-IAP274 Front View (Aesthetic Cover Removed)

Figure 2

W-IAP275 Front View

System LED

NOTE: The antenna connectors of W-IAP274 Instant access point are covered by an aesthetic cover in the package. The aesthetic

cover can be removed when necessary.

System LED

4 Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide

LED

The W-IAP270 Series Instant access point is equipped with one LED that indicates the system status of the IAP.

Table 2

W-IAP270 Series LED Status during Operation

Figure 3

W-IAP274 Rear View

Table 1

W-IAP270 Series LED Status during Boot Up

LED Color/State Meaning

System LED Off No power to IAP

Red Initial power-up

Green - Flashing IAP booting

Green - Steady IAP ready and 1000Mbps Ethernet link established. The

LED turns off after 1200 seconds

Green - Yellow, 6 seconds

period

IAP ready and 10/100Mbps Ethernet link established. The

LED turns off after 1200 seconds

LED Color/State Meaning

System LED Solid Red General fault

One blink off every 3 seconds Radio 0 fault (5 GHz)

Two quick blink off 0.5 seconds

apart cycled every 3 second

Radio 1 fault (2.4GHz)

AC Power Interface

LAN Port

WAN Port

Grounding Point

USB Console Port and Reset button

Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide 5

Figure 4

W-IAP275 Rear View

USB Console Port

The USB Micro-B console port allows you to connect the IAP to a terminal or a laptop for direct local

management. Use the included USB console cable to connect the IAP. You can download the necessary driver for

USB-UART adapter from download.dell-pcw.com under the Tools & Resources tab.

Use the following setting to access the terminal:

Ethernet Ports

The W-IAP270 Series Instant access point is equipped with two 10/100/1000Base-T (RJ-45) Gigabit Ethernet

ports (WAN and LAN port) for wired network connectivity. The WAN port supports 802.3at Power over Ethernet

(PoE), accepting 48 VDC (nominal) as a standard defined Powered Device (PD) from a Power Sourcing

Equipment (PSE) such as a PoE midspan injector.

These ports have RJ-45 female connectors with the pin-outs shown in Figure 5.

Figure 5

Gigabit Ethernet port Pin-Out

Table 3

Console Settings

Baud Rate Data Bits Parity Stop Bits Flow Control

9600 8 None 1 None

AC Power Interface

LAN Port

WAN Port

Grounding Point

USB Console Port and Reset button

6 Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide

Reset Button

The reset button can be used to return the IAP to factory default settings. To reset the IAP:

1. Power off the IAP.

2. Press and hold the reset button using a small, narrow object, such as a paperclip.

3. Power-on the IAP without releasing the reset button. The system LED will flash within 5 seconds.

4. Release the reset button.

The system LED will flash again within 15 seconds indicating that the reset is completed. The IAP will now

continue to boot with the factory default settings.

AC Power Interface

The W-IAP270 Series Instant access point is capable of AC power in the range of 100 - 240 VAC. The power cord

or power connector kit is sold separately.

Grounding Point

Always remember to protect the IAP by installing grounding lines. The ground connection must be complete

before connecting power to the IAP enclosure.

Figure 6

W-IAP274 and W-IAP275 Top View

The solar shield with the mounting holder is fixed onto the W-IAP270 Series Instant access point before shipping

from the factory.

Solar Shield

Mounting Holder

Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide 7

Figure 7

W-IAP274 Bottom View

Figure 8

W-IAP275 Bottom View

External Antenna Connectors

The W-IAP274 Instant access point is equipped with six N-type female connectors for external antenna. The

connectors are labeled 2G0, 2G1, 2G2, 5G0, 5G1 and 5G2, and correspond to 2.4/5Ghz radio chains 0,1, and 2 .

Air Vent

The bottom of the W-IAP270 Series Instant access point has an air vent to balance the pressure and humidity

inside and outside the IAP. It also allows air exchange between the IAP and the environment in a controlled way

that doesn’t allow water to get in.

With Aesthetic Cover

Aesthetic Cover Removed

Air Vent

NOTE: Please install the external antennas according to the manufacturer’s instruction and connect the antennas to the N-type

female antenna connectors on the W-IAP274 Instant access point.

8 Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide

Before You Begin

Identifying Specific Installation Locations

You can mount the W-IAP270 Series Instant access point on a wall or pole. Use the IAP placement map

generated by Dell VisualRF Plan software tool to determine the proper installation location(s). Each location

should be as close as possible to the center of the intended coverage area and should be free from obstructions or

obvious sources of interference. These RF absorbers/reflectors/interference sources will impact RF propagation

and should have been accounted for during the planning phase and adjusted for in RF plan.

Identifying Known RF Absorbers/Reflectors/Interference Sources

Identifying known RF absorbers, reflectors, and interference sources while in the field during the installation

phase is critical. Make sure that these sources are taken into consideration when you attach an IAP to its fixed

location. Examples of sources that degrade RF performance include:

 Cement and brick

 Objects that contain water

 Metal

 Microwave ovens

 Wireless phones and headsets

CAUTION: FCC Statement: Improper termination of access points installed in the United States configured to non-US model

controllers will be in violation of the FCC grant of equipment authorization. Any such willful or intentional violation may result in a

requirement by the FCC for immediate termination of operation and may be subject to forfeiture (47 CFR 1.80).

CAUTION: EU Statement:

Lower power radio LAN product operating in 2.4 GHz and 5 GHz bands. Refer to the

Dell Networking W-Series

Instant User Guide

for details on restrictions.

Produit réseau local radio basse puissance operant dans la bande fréquence 2.4 GHz et 5 GHz. Merci de vous referrer au

Dell

Networking W-Series

Instant User Guide

pour les details des restrictions.

Low Power FunkLAN Produkt, das im 2.4 GHz und im 5 GHz Band arbeitet. Weitere Informationen bezlüglich Einschränkungen

finden Sie im

Dell Networking W-Series Instant User Guide.

Apparati Radio LAN a bassa Potenza, operanti a 2.4 GHz e 5 GHz. Fare riferimento alla

Dell Networking W-Series Instant User

Guide

per avere informazioni detagliate sulle restrizioni.

NOTE: Dell in compliance with governmental requirements, has designed the W-IAP270 Series Instant access point such that only

authorized network administrators can change configuration settings. For configuration information, refer to the

Dell Networking

W-Series Instant Quick Start Guide

and

Dell Networking W-Series Instant User Guide

CAUTION: Access points are radio transmission devices and as such are subject to governmental regulation. Network

administrators responsible for the configuration and operation of access points must comply with local broadcast regulations.

Specifically, access points must use channel assignments appropriate to the location in which the access point will be used.

Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide 9

Installing the IAP

Using the Mounting Kits

The W-IAP270 Series Instant access point can be installed on a wall or attached to a pole using one of the

following mounting kits:

Grounding the IAP

After the W-IAP270 Series Instant access point is installed using one of the mounting kits above, the grounding

must be completed before powering up the IAP. The grounding wire should be #8 AWG.

1. Peel the cover of one end of the grounding wire and place the bare grounding wire into the included copper

lug, and press firmly with the crimping pliers.

2. Fasten the copper lug to the grounding hole on the W-IAP270 Series Instant access point with the M4 x6

screw included in the IAP package as shown in Figure 9.

Figure 9

Grounding the IAP

NOTE: Service to all Dell Networking products should be performed by trained service personnel only.

Table 4

Mounting Kits for W-IAP270 Series Instant access point

Part Number Description

AP-270-MNT-V1 Long mounting kit for wall and vertical pole mounting, 300 mm from vertical mounting asset.

AP-270-MNT-V2 Short mounting kit for wall and vertical pole mounting, 75 mm from vertical mounting asset.

AP-270-MNT-H1 Mounting kit for hanging from inclined or horizontal structure.

NOTE: The W-IAP270 Series Instant access point does not ship with any mounting kits. These mounting kits are available as

accessories and must be ordered separately.

NOTE: For installation instructions on AP-270-MNT-V1, AP-270-MNT-V2 and AP-270-MNT-H1, please refer to the

AP-270-MNT-V1

Installation Guide, AP-270-MNT-V2 Installation Guide

and

AP-270-MNT-H1 Installation Guide

respectively

10 Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide

Connecting the Ethernet Cable

To connect the Ethernet cable to the W-IAP270 Series Instant access point, perform the following steps using

the cable glands that were shipped with the IAP.

Figure 10

Installing a Cable Gland

1. Slide the sealing nut over the cable (without the RJ45 connector attached to the end).

2. Slide the clamping ring over the cable.

3. Using a crimping tool, attach the shielded RJ45 connector to the end of the cable.

4. Remove the weatherproof cap on the Ethernet port.

5. Insert the RJ45 connector to the Ethernet port.

6. Screw the clamping ring onto the Ethernet port.

7. Screw the sealing nut onto the clamping ring.

Connecting the Power Cable

The W-IAP270 Series Instant access point offers two ways to connect the unit to AC power. Two power cord

variants are available. THere is also a connector kit option that allows you to assemble your own cable if the

standard offering does not meet deployment needs.

WARNING: Failure to use the included Ethernet cable glands can lead to connectivity and PoE issues.

NOTE: The cable is not included and must be purchased separately. Purchase a suitable UV-resistant, outdoor rated, CAT 5E or

better RJ45 cable for use with the W-IAP270 Series Instant access point.

Sealing Nut

Clamping Ring

CAT 5E or Better Cable

Seals

NOTE: The seals inside the clamping ring by factory default is applicable for cables with 5-8.5 mm diameter. In the cable gland kit,

another seals is provided for use with the cables with 7-10 mm diameter.

CAUTION: Installation and service of Dell products should be performed by professional installers in a manner that is consistent

with the electrical code in force in the jurisdiction of deployment. In many countries this will require a licensed electrician to

perform this operation. In Japan, this is a Certified Electrician by Ministry of Economy, Trade, and Industry.

NOTE: The W-IAP270 Series Instant access point does not ship with any power cables. These are available as accessories and

must be ordered separately.

Table 5

SKUs for Powering Options

Part Number Description

PC-OD-AC-P-NA Weatherproof AC power cable(5m), North America version

PC-OD-AC-P-INT Weatherproof AC power cable(5m), International (EU) version

Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide 11

The difference between the NA and INTL part variants is the color coding of the conductors.

 The North American cable uses Black (Hot), White (Neutral), and Green (Ground).

 The INTL part follows the international schema of Brown (Hot), Blue (Neutral) and Yellow/Green (Ground)

Best Practice for Outdoor Connection to AC Mains

In all circumstances and with any outdoor infrastructure, the recommended practice is to connect to AC mains in

an order grade weather protected junction box. This needs to be implemented by a qualified resource in a manner

that is consistent with the electrical code in force in the jurisdiction of deployment. In many countries this will

require a licensed electrician to perform this operation.

In Japan, this would is a Certified Electrician by Ministry of Economy, Trade and Industry.

The use of plugs with infrastructure equipment is suitable only for temporary installs where nuisance tripping of

GFI plugs is considered tolerable. Should it be desired to attach a plug to the cable assemblies then the installer is

expected to follow all directions provided with the plug end in a fashion consistent with local electrical code.

Use of the CKIT-OD-AC-P

Assembly instructions for this part are shipped with the part. All instructions must be followed to ensure proper

assembly of the connector onto the cable.

The required specifications for third party cable used with the CKIT solution are as follows:

 AC power cable specifications (when using AC connector kit and custom cable): minimum voltage/current

rating 250V/1A, diameter 6-12mm, rated for outdoor use and UV exposure

AC Power Cable Connector PIN OUT

Figure 11

AC power cable connector

Connecting the Power Cable to the IAP

1. Remove the weatherproof cap on the power interface.

2. Insert the power cable connector into the power interface and hand-fasten the locknut.

Verifying Post-Installation Connectivity

The integrated LEDs on the IAP can be used to verify that the IAP is receiving power and initializing successfully

(see Table 1and Table 2). Refer to the Dell Networking W-Series Instant Quick Start Guide for details on verifying

post-installation network connectivity.

CKIT-OD-AC-P Weatherproof connector kit for AC power interface

Table 5

SKUs for Powering Options

Part Number Description

HotNeutral

Ground

12 Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide

Product Specifications

Mechanical

 Device Dimensions (HxWxD)

 W-IAP274 (without aesthetic cover): 5.5 inches x 9 inches x 9.4 inches (14cm x 23cm x 24cm)

 W-IAP274 (with aesthetic cover): 7.5 inches x 9 inches x 9.4 inches (19cm x 23cm x 24cm)

 W-IAP275: 10.6 inches x 9 inches x 9.4 inches (27cm x 23cm x 24cm)

 Weight

 W-IAP274(without aesthetic cover): 5.3 lbs/2.4 kg

 W-IAP274 (with aesthetic cover): 6lbs/2.7kg

 W-IAP275: 5.3 lbs/2.4 kg

Electrical

 Ethernet

 2 x 10/100/1000Base-T auto-sensing Ethernet RJ-45 Interfaces

 MDI/MDX

 Power over Ethernet (IEEE 802.3at compliant), 48VDC/0.6A

 Power

 100-240 VAC 50/60 Hz from external AC power source

 PoE support on WAN port: 802.3at-compliant PoE sourcing devices

Environmental

 Operating

 Temperature: -40ºC to 60ºC (-40ºF to 140ºF)

 Humidity: 5% to 95% non-condensing

 Storage

 Temperature: -50ºC to 85ºC (-58ºF to 185ºF)

For additional specifications on this product, refer to the product data sheet on dell.com

Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide 13

Safety and Regulatory Compliance

Regulatory Model Name

The following regulatory model names apply to the W-IAP270 Series Instant access points:

 W-IAP274: APEX0101

 W-IAP275: APEX0100

FCC

This device is electronically labeled. To view the FCC ID:

1. Log into the controller WebUI

2. Navigate to Maintenance > Controller > About.

FCC Class B Part 15

This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is

subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instructions, may cause interference harmful to radio

communications.

If this equipment does cause interference, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

 Consult the dealer or an experienced radio or TV technician for help.

Complies with the Class B limits for radio noise emissions as set out in the interference-causing equipment

standard entitled “Digital Apparatus,” ICES-003 of Industry Canada.

NOTE: For country specific restrictions and additional safety and regulatory information, refer to the multi-language

Dell

Networking W-Series Safety, Environmental, and Regulatory Information

document included with this product.

CAUTION: Dell access points must be installed by a professional installer. The professional installer is responsible for ensuring

that grounding is available and it meets applicable local and national electrical codes.

CAUTION: RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits. This equipment

should be installed and operated with a minimum distance of 13.78 inches (35 cm) between the radiator and your body for 2.4 GHz

and 5 GHz operations. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

When operated in the 5.15 to 5.25 GHz frequency range, this device is restricted to indoor use to reduce the potential for harmful

interference with co-channel Mobile Satellite Systems.

CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the

user’s authority to operate this equipment.

14 Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide

Cet apareil numerique de la classe B respecte toutes les exigencies du Reglement sur le materiel brouilleur du

Canada.

Users are advised that high power Radars are allocated as primary users of the bands 5250-5350 MHz and 5650-

5850 MHz and these Radars could cause interference and/or damage to Licensed Exempt WLAN devices.

EU Regulatory Conformance

Dell, hereby declares that the APEX0101 and APEX0100 device models are in compliance with the

essential requirements and other relevant provisions of Directive 1999/5/EC -CE(!). The Declaration of

Conformity made under Directive 1999/5/EC is available for viewing on dell.com.

Proper Disposal of Dell Equipment

For the most current information about Global Environmental Compliance and Dell products, visit dell.com.

Waste of Electrical and Electronic Equipment

Dell products at end of life are subject to separate collection and treatment in the EU

Member States, Norway, and Switzerland and therefore are marked with the symbol shown at

the left (crossed-out wheelie bin). The treatment applied at end of life of these products in

these countries shall comply with the applicable national laws of countries implementing

Directive 2002/96/EC on Waste of Electrical and Electronic Equipment (WEEE).

European Union RoHS

Aruba Networks Inc., hereby, being the manufacturer of this product, declares that all CE

marked Dell wireless controller and access point products are manufactured in accordance

to the provisional requirements set forth in the RoHS Directive 2011/65/EC.

A copy of the Aruba Declaration of Conformity may be obtained upon request from:

Aruba Networks International Ltd.

Building 1000,

Citygate Mahon

Cork Ireland

Please include the regulatory model number located on the product’s regulatory nameplate with the request.

China RoHS

Dell products also comply with China environmental declaration requirements and are labeled

with the “EFUP 10” label shown at the left.

Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide 15

India RoHS

This product complies with RoHS requirements as prescribed by E-Waste (Management & Handling) Rules,

governed by the Ministry of Environment & Forests, Government of India.

Canadian Statement

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and

maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio

interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically

radiated power (e.i.r.p.) is not more than that necessary for successful communication.

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this

device must accept any interference, including interference that may cause undesired operation of the device.

Canadian Caution

This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by

Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna

impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum

gain indicated for that type, are strictly prohibited for use with this device.

Gain of antenna: 14.0dBi max/10dBi max;

Type of antenna: directional/ommi;

Impedance of antenna: 50ohm

Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait partie du

matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et

ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans

cette liste, ou dont le gain est supérieur au gain

maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.

Gain d'antenne: 14.0dBi maximal/10dBi maximal;

Type d'antenne: 50 ohm, directionnel/ommi.

᳝↦᳝ᆇ⠽䋼ໄᯢ

Hazardous Materials Declaration

᳝↦᳝ᆇ⠽䋼៪ܗ㋴(Hazardous Substance)

䚼ӊৡ⿄

(Parts)

䪙

3E

∲

+J

䬝

&G

݁Ӌ䫀

&U





໮⒈㘨㣃

3%%

໮⒈Ѡ㣃䝮

3%'(

⬉䏃ᵓ

(PCA Boards)

ƻƻ ƻ ƻ ƻ

ᴎẄ㒘ӊ

(Mechanical Sub-Assemblies)

h ƻƻ ƻ ƻ ƻ

ƻ˖

㸼⼎䆹᳝↦᳝ᆇ⠽䋼೼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼

SJ/T11363-2006 ᷛޚ㾘ᅮⱘ䰤䞣㽕∖ҹϟǄ

Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is

below the relevant threshold of the SJ/T11363-2006 standard.

h˖ 㸼⼎䆹᳝↦᳝ᆇ⠽䋼㟇ᇥ೼䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ৿䞣䍙ߎ6-7ᷛޚ㾘ᅮⱘ䰤䞣㽕∖Ǆ

Indicates that the concentration of the hazardous substance of at least one of all homogeneous materials

in the parts is above the relevant threshold of the SJ/T11363-2006 standard.

ᇍ䫔ଂП᮹ⱘ᠔ଂѻકᴀ㸼ᰒ⼎կᑨ䫒ⱘ⬉ᄤֵᙃѻકৃ㛑ࣙ৿䖭ѯ⠽䋼Ǆ

This table shows where these substances may be found in the supply chain of electronic information

products, as of the date of sale of the enclosed product.

ℸᷛᖫЎ䩜ᇍ᠔⍝ঞѻકⱘ⦃ֱՓ⫼ᳳᷛᖫᶤѯ䳊䚼ӊӮ᳝ϔϾϡৠⱘ⦃ֱՓ⫼ᳳ

՟བ⬉∴ऩܗ῵ഫ䌈೼݊ѻકϞ

ℸ⦃ֱՓ⫼ᳳ䰤া䗖⫼Ѣѻકᰃ೼ѻક᠟ݠЁ᠔㾘ᅮⱘᴵӊϟᎹ԰

The Environment- Friendly Use Period (EFUP) for all enclosed products and their parts are

per the symbol shown here. The Environment- Friendly Use Period is valid only when the

product is operated under the conditions defined in the product manual.

16 Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide

Philippines (W-IAP274)

Philippines (W-IAP275)

Hong Kong (W-IAP274)

Hong Kong (W-IAP275)

UAE (W-IAP274)

UAE (W-IAP275)

Type-Approval No.

ESD-1408699C

Type-Approval No.

ESD-1408698C

HK0011400885

HK0011400884

TRA

REGISTERED No:

DEALER No:

DA0039425/10

ER01290403/14

TRA

REGISTERED No:

DEALER No:

DA0039425/10

ER0129040/14

Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide 17

Singapore (W-IAP274 and W-IAP275)

DB101525

18 Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide

This page is intentionally left blank.

Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide 19

This page is intentionally left blank.

, Aruba Wireless Networks

, the registered Aruba the Mobile

Edge Company logo, and Aruba Mobility Management System

. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc.

Originated in the USA. All other trademarks are the property of their respective owners.

Open Source Code

Certain Aruba products include Open Source software code developed by third parties, including software code subject to the GNU General Public License (GPL), GNU

Lesser General Public License (LGPL), or other Open Source Licenses. The Open Source code used can be found at this site:

http://www.arubanetworks.com/open_source

Fenneberg, et al.

Legal Notice

The use of Aruba Networks, Inc. switching platforms and software, by all individuals or corporations, to terminate other vendors’ VPN client devices constitutes complete

acceptance of liability by that individual or corporation for this action and indemnifies, in full, Aruba Networks, Inc. from any and all legal actions that might be taken against it

with respect to infringement of copyright on behalf of those vendors.

Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide

Part Number 0511607-02 | August 2014

Contacting Dell

Website Support

Main Website dell.com

Contact Information dell.com/contactdell

Support Website dell.com/support

Documentation Website dell.com/support/manuals