Samsung DVD-VR375 Le manuel du propriétaire

imagine the possibilities

Thanks you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/global/register

DVD & VCR

user manual

DVD-VR375

375 eng 1-18.indd 1375 eng 1-18.indd 1 2008-2-18   02:27:172008-2-18   02:27:17

getting started

WARNING

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that dangerous

voltage consisting a risk of electric shock

is present within this unit.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that there are

important operating and maintenance

instructions in the literature accompanying

this unit.

Do not install this equipment in a conﬁ ned space such as a bookcase or similar unit.

WARNING

To prevent damage which may result in ﬁ re or electric shock hazard, do not expose this appliance to rain or

moisture.

CAUTION

THIS DVD RECORDER & VCR USES AN INVISIBLE LASER BEAM WHICH CAN CAUSE HAZARDOUS RADIATION

EXPOSURE IF DIRECTED.

BE SURE TO OPERATE THE RECORDER AS INSTRUCTED.

CAUTION

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CAUTIONS

Caution : To prevent electric shock, match the wide blade of the plug to wide slot of the socket and fully insert.

This product satisﬁ es FCC regulations when shielded cables and connectors are used to connect the unit to other

equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use

shielded cables and connectors for connections.

FCC NOTE (for U.S.A):

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Caution : FCC regulations state that any unauthorized changes or modiﬁ cations to this equipment may void the

user’s authority to operate it.

•

375 eng 1-18.indd 2375 eng 1-18.indd 2 2008-2-18   02:27:202008-2-18   02:27:20

English _3

● GETTING STARTED

This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.

This DVD Recorder & VCR is designed and manufactured to respond to the Region Management Information. If the

Region number of a DVD disc does not correspond to the Region number of this , the DVD Recorder & VCR cannot

play the disc.

This device is protected by U.S. Patent Nos.4,631,603;4,819,098;4,907,093;5,315,448 and 6,516,132. This

product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property

rights. Use of this copyright protection technology must be authorized by Macrovision,and is intended for home and

other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is

prohibited.

This product is covered by one or more of the following U.S. patents:

5,060,220 5,457,669 5,561,649 5,705,762 5,987,417

6,043,912 6,222,983 6,272,096 6,377,524 6,377,531

6,385,587 6,389,570 6,408,408 6,466,532 6,473,736

6,477,501 6,480,829 6,556,520 6,556,521 6,556,522

6,578,163 6,594,208 6,631,110 6,658,588 6,674,697

6,674,957 6,687,455 6,697,307 6,707,985 6,721,243

6,721,493 6,728,474 6,741,535 6,744,713 6,744,972

6,765,853 6,765,853 6,771,890 6,771,891 6,775,465

6,778,755 6,788,629 6,788,630 6,795,637 6,810,201

6,862,256 6,868,054 6,894,963 6,937,552

PRECAUTION

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below.

Keep these operating instructions handy for future reference.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with a dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including ampliﬁ ers) that produce heat.

M



1)

2)

3)

4)

5)

6)

7)

8)

375 eng 1-18.indd 3375 eng 1-18.indd 3 2008-2-18   02:27:202008-2-18   02:27:20

4_ getting started

getting started

Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two

blades with one wider than the other. A groundingtype plug has two blades and a third grounding prong.

The wide blade or the third prong is provided for your safety. If the provided plug does not ﬁ t into your

outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

Only use attachments/accessories speciﬁ ed by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table speciﬁ ed by the manufacturer, or

sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused for long periods of time.

Refer all servicing to qualiﬁ ed service personnel. Service is required when the apparatus has been

damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus. Service is also required if the apparatus has been exposed to rain

or moisture, does not operate normally, or has been dropped.

Handling Cautions

Before connecting other components to this recorder, be sure to turn them all off.

Do not move the recorder while a disc is being played, or the disc may be scratched or broken, and the

recorder’s internal parts may be damaged.

Do not put a ﬂ ower vase ﬁ lled with water or any small metal objects on the recorder.

Be careful not to put your hand into the disc tray.

Do not place anything other than the disc in the disc tray.

Exterior interference such as lightning and static electricity can affect normal operation of this recorder.

If this occurs, turn the DVD Recorder & VCR off and on again with the POWER button, or disconnect and

then reconnect the AC power cord to the AC power outlet. The recorder will operate normally.

Be sure to remove the disc and turn off the recorder after use.

Disconnect the AC power cord from the AC outlet when you don’t intend to use the recorder for long

periods of time.

Clean the disc by wiping in a straight line from the inside to the outside of the disc.

Apparatus shall not be exposed to dripping or splashing and no objects ﬁ lled with liquids, such as vases,

shall be placed on the apparatus.

The Mains plug is used as a disconnect device and shall stay readily operable at any time.

Maintenance of Cabinet

For safety reasons, be sure to disconnect the AC power cord from the AC outlet.

Do not use benzene, thinner, or other solvents for cleaning.

Wipe the cabinet with a soft cloth.

Disc Handling

Use discs with regular shapes. If an irregular disc (a disc with a special shape) is

used, this DVD Recorder & VCR may be damaged.

Holding discs

Avoid touching the surface of a disc where recording is performed.

9)

10)

11)

12)

13)

14)

•

375 eng 1-18.indd 4375 eng 1-18.indd 4 2008-2-18   02:27:212008-2-18   02:27:21

English _5

● GETTING STARTED

DVD-RAM, DVD±RW and DVD±R

Clean with an optional DVD-RAM/PD disc cleaner. Do not use cleaners or cloths for CDs to

clean DVD-RAM/DVD±RW/DVD±R discs.

DVD-Video, Audio CD

Wipe off dirt or contamination on the disc with a soft cloth.

Cautions on handling discs

Do not write on the printed side with a ball-point pen or pencil.

Do not use record cleaning sprays or antistatic. Also, do not use volatile chemicals, such as benzene or

thinner.

Do not apply labels or stickers to discs. (Do not use discs ﬁ xed with exposed tape adhesive or leftover

peeled-off stickers.)

Do not use scratch-proof protectors or covers.

Do not use discs printed with label printers available on the market.

Do not load warped or cracked discs.

Disc Storage

Be careful not to damage the disc because the data on these discs are highly vulnerable to the environment.

Do not keep under direct sunlight.

Keep in a cool ventilated area.

Store vertically.

Keep in a clean protection jacket.

If you move your DVD Recorder & VCR suddenly from a cold place to a warm place, condensation may

generate on the operating parts, including the lens, and cause abnormal disc playback. In this case, do not

connect the plug to the power outlet and wait for two hours. Then insert the disc and try to play back again.

It will work properly when condensation has evaporated.

Disc Speciﬁ cations

DVD-Video

A digital versatile disc (DVD) can contain up to 135- minutes of images, 8 audio languages and 32 subtitle

languages. It is equipped with MPEG-2 picture compression and Dolby 3D surround, allowing you to enjoy

vivid and clear theater quality images in the comfort of your own home.

When switching from the ﬁ rst layer to the second layer of a double-layered DVD Video disc, there may be

momentary distortion in the image and sound. This is not a malfunction of the unit.

Once a

DVD-RW(V)/-R(V)/+R recorded is ﬁ nalized, it is playable in a standard DVD player.

Audio CD

An audio disc on which 44.1kHz PCM Audio is recorded.

Plays CD-DA format audio CD-R and CD-RW discs. This unit may not be able to play some CD-R or

CD-RW discs due to the condition of the recording.

CD-R/-RW

MP3 CD-R/-RW

Only CD-R discs with MP3 ﬁ les recorded with ISO9660 or JOLIET format can be played back

Only MP3 ﬁ les with the "mp3" or "M P3" extension can be used.

For MP3 ﬁ les recorded with a VBR(Variable Bit Rates), from 80 Kbps to 320 Kbps, the sound may cut in

and out.

Playable bitrate range is from 56Kbps to 320Kbps.

The unit can handle a maximum of

499 ﬁ les and folders.

DVD-RAM/±RW/±R discs that contain MP3 ﬁ les can be played back.

•

❖

•

375 eng 1-18.indd 5375 eng 1-18.indd 5 2008-2-18   02:27:212008-2-18   02:27:21

6_ getting started

getting started

JPEG CD-R/-RW

Only JPEG ﬁ les with the ".jpg", ".JPG" extension can be used.

The unit can handle a maximum of 1000 ﬁ les and folders.

Maximum size of progressive JPEG is 3M pixels.

MOTION JPEG is not supported.

DVD-RAM/±RW/±R discs that contain JPEG ﬁ les can be played back.

Using CD-R/-RW

Use a 700MB(80 minutes) CD-R/-RW disc. If possible, do not use a 800MB(90 minutes) or above disc, as

the disc may not play back.

If the CD-R/-RW disc was not recorded as a closed session, you may experience a delay in the early

play-back time, and all recorded ﬁ les may not play.

Some CD-R/-RW discs may not be playable with this unit, depending on the device which was used to

burn them. For contents recorded on CD-R/-RW media from CDs for your personal use, playability may

vary depending on contents and discs.

When recording from CDs for your personal use to CD-R/-RW discs, playability may vary depending on the

contents and discs.

DVD-R/-RW Disc Playback and Recording

Recording and playback can be performed on DVD-R/-RW discs in both Video and VR Modes.

Once a DVD-R/-RW is recorded in VR or Video mode and ﬁ nalized, you cannot perform additional

recordings.

Once a DVD-R/-RW is recorded in Video Mode and ﬁ nalized, it becomes a DVD-Video.

In both modes, playback can be performed before and after ﬁ nalization, but additional recording, deleting

and editing can not be performed after ﬁ nalization.

If you want to record the disc in VR Mode and then record in V Mode, be sure to execute format. Be careful

when executing Format because all the recorded data may be lost. You can change the disc mode only

one times when the unused DVD-R disc is inserted.

• DVD-R/-RW (VR mode)

- You can record multiple titles, edit, delete, partial delete, create a playlist, etc.

- A disc that is recorded in this mode may not be played by existing DVD players.

• DVD-R/-RW (Video mode)

- The disc can be played by an existing DVD player once it has been ﬁ nalized.

- If a disc that has been recorded in Video mode by a different manufacturer's recorder but has not been

ﬁ nalized it cannot be played or recorded by this recorder.

- When programing is erased from a DVD-R, that space does not become available. Once an area on a DVD-R

is recorded on, that area is no longer available for recording, whether the recording is erased or not.

DVD+R Disc Playback and Recording

Once a DVD+R is recorded and ﬁ nalized, it is playable in a standard DVD player.

You can record onto the available space on the disc and perform editing functions such as giving titles to

discs and programs and erasing programs before ﬁ nalizing.

When programing is erased from a DVD+R, that space does not become available. Once an area on a

DVD+R is recorded on, that area is no longer available for recording, whether the recording is erased or not.

It takes about 30 seconds for the unit to update the recorded information after recording ﬁ nishes.

This product optimizes the DVD+R for each recording. Optimizing is executed when you start recording

after inserting the disc or turning on the unit. Recording onto the disc may become impossible if optimizing

is performed too many times.

Playback may be impossible in some cases due to the condition of recording.

This unit can play back DVD+R discs recorded and ﬁ nalized with a Samsung DVD video recorder. It may

not be able to play some DVD+R discs depending on the disc and the condition of the recording.

❖

•

❖

•

375 eng 1-18.indd 6375 eng 1-18.indd 6 2008-2-18   02:27:212008-2-18   02:27:21

English _7

● GETTING STARTED

DVD+RW Disc Playback and Recording

With DVD+RW discs, there is no difference between DVD-Video format (Video mode) and DVD-Video

Recording format (VR mode).

Finalizing is generally unnecessary when using a DVD+RW disc.

DVD-RAM Disc Playback and Recording

For cartridge type DVD-RAM discs, remove the cartridge and use only the disc.

You cannot play a DVD-RAM in most DVD players due to compatibility issues.

Only DVD-RAM standard Version 2.0 discs can be played in this unit.

DVD-RAM discs recorded on this unit may not work with other DVD Players. To determine compatibility

with these DVD-RAM discs, refer to the user’s manual for the player.

COPY PROTECTION

• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD Recorder & VCR

directly to your TV, not to a VCR. Connecting your recorder to a VCR results in a distorted picture from copy-protected

DVD discs.

• This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents

and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright

protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited

viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is

prohibited.

Protection

Program-protection: See page 70 “Locking a Title”

Disc-protection: See page

76 “Disc Protection”

❋ DVD-RAM/DVD±RW/DVD±R discs that are incompatible with the DVD-VIDEO format cannot be played

with this product.

❋

For more information on DVD recording compatibility, consult your DVD-RAM/DVD±RW/DVD±R manufacturer.

❋ Use of poor quality DVD-RAM/DVD±RW/DVD±R discs may cause the following unexpected problems

including, recording failure, loss of recorded or edited materials, or damage to the recorder.

Do not use the following discs!

LD, CD-G, CD-I, CD-ROM and DVD-ROM discs should not be used in this product.

[Note]

Some commercial discs and DVD discs purchased outside your region may not be playable with this

product. When these discs are played, either “No Disc” or “The disc cannot be played. Please check the

regional code of the disc.” will be displayed.

If your DVD-RAM/DVD±RW/DVD±R disc is an illegal copy or is not in DVD video format, it may also not be playable.

Disc Compatibility

Not all brands of discs will be compatible with this unit.

The latest ﬁ rmware upgrade to improve recording & playback quality can be downloaded from our web site.

(Download Center at www.samsung.com/global/register)

If disc compatibility problems continue, or there is an issue upgrading your recorder, contact the Call Center

at 1-800-SAMSUNG.

•

❖

•

375 eng 1-18.indd 7375 eng 1-18.indd 7 2008-2-18   02:27:212008-2-18   02:27:21

8_ getting started

getting started

GETTING STARTED

2

2 Warning

3 Precaution

10 General Features

11 Before Reading the User's Manual

12 How to use the DVD Recorder & VCR

13 Unpacking

17 Description

CONNECTING & SETTING UP

19

19 Connecting the Antenna Cable

22 Connecting HDMI/DVI to a TV

24 Connecting the Video Output

25 Connecting the Audio Cable

27 Connecting External Devices

SYSTEM SETUP

29

29 On-Screen Menu Navigation

29 Easy Setup

31 Tuner Preset

32 Clock Set

34 Setting up the Video Options

36 Progressive Scan

36 Setting up the Audio Options

39 Setting up the Features

41 Setting up the Options

42 Setting up the Parental

44 VCR Function Setting

PLAYBACK

45

45 Region code (DVD-Video only)

45 Logos of Discs that can be played

46 Disc types that can be played

47 Playing a Disc

48 Using the Disc Menu and Title Menu

48 Using the Search & Skip Functions

49 Slow Motion Play/Step Motion Play

50 Using the ANYKEY button

50 Selecting the Audio Language

51 Remain

51 Selecting the Subtitle Language

51 Changing the Camera Angle

52 Playing back an Audio CD (CD-DA)/MP3

53 Playing back a Picture Disc

54 Playing back a MPEG4 Disc

55 Playing back a VHS Tape (VCR)

375 eng 1-18.indd 8375 eng 1-18.indd 8 2008-2-18   02:27:222008-2-18   02:27:22

English _9

● GETTING STARTED

RECORDING

57

57 Recordable Discs

58 Recordable Mode

59 Unrecordable Video

60 Recording immediately

61 Recording through the DV Input jack

62 Making a One Touch Recording (OTR)

62 Making a Timer Recording

64 Editing the Timer List

64 Erasing the Timer List

65 Basic VCR Recording

66 Check Remaining Time

66 Special Recording Features

67 Dubbing to DVD or Video

68 DV/D8 Dubbing

EDITING

69

69 Playing the Title List

70 Basic Editing (Title List)

73 Advanced Editing (Playlist)

76 Disc

Setting

REFERENCE

80

80 Troubleshooting (DVD-VIDEO/DVD-RAM/

DVD±RW/DVD±R)

81 Troubleshooting (DVD)

82 Troubleshooting (VCR)

83 Problems and Solutions (Display Error

Message)

APPENDIX

85

85 Speciﬁ cations

375 eng 1-18.indd 9375 eng 1-18.indd 9 2008-2-18   02:27:222008-2-18   02:27:22

10_ getting started

getting started

GENERAL FEATURES

The DVD-VR375 allows you to record, edit and play high quality digital video on DVD-RAM/DVD±RW/DVD±R discs.

High quality digital audio/video recording and playback

You can record up to approximately 16-hours of video on a double side 9.4 GB DVD-RAM disc,up to 15-

hours on a dual-layer 8.5GB DVD±R disc, and up to 8-hours on a 4.7 GB DVD-RAM/DVD±RW/DVD±R disc,

depending on the recording mode.

Creating DVD video titles using DVD±RW/DVD±R discs

With the DVD-VR375, you can create your own DVD video titles on 4.7 GB DVD±RW/DVD±R or 8.5GB

DVD±R discs.

A Variety of Recording Options

You can set your DVD Recorder & VCR to one of eight different recording modes, each varying in recording

quality and length. Select a recording mode according to the time and picture quality you need.

For example, if picture quality is your top priority, select “HQ” (high quality).

If recording time is your priority, “SLP” may be a possible choice.

Dual layer DVD±Rs have approximately double the capacity of single layer DVD±Rs.

Dubbing digital camcorder content using DV input jack

Record digital camcorder images onto DVD-RAM/DVD±RW/DVD±R discs using the DV input jack (IEEE

1394-4pin). (See page

61.)

High quality progressive scan

Progressive scanning provides high resolution and ﬂ icker free video. The 10-bit 54-MHz DAC, 2D Y/C

Separating circuitry and Time Base Corrector processor technology provide you with the highest image

playback and recording quality. (See page

24.)

Component progressive scan output video is available in both DVD and VCR modes.

When the HDMI cable is connected, ‘off’ can not be selected. (See page 36)

A variety of functions with an easy-to-use user interface

The Integrated menu systems and messaging functionality allow you to perform the desired operations easily

and conveniently. With a DVD-RAM/DVD-RW/

DVD-R(VR mode) disc, you can edit recorded images, create

playlist, and edit videos in a speciﬁ c sequence according to your needs.

HDMI (High Deﬁ nition Multimedia Interface)

HDMI reduces picture noise by allowing a pure digital video/audio signal path from the

DVD Recorder & VCR to your TV.

Divx Trademark

Divx,Divx Certiﬁ ed,and associate logos are trademarks of DivXNetworks,Inc and are used

under license.

EZ REC MODE

This function allows you Finalize a disc automatically. (See page

40.)

375 eng 1-18.indd 10375 eng 1-18.indd 10 2008-2-18   02:27:222008-2-18   02:27:22

English _11

● GETTING STARTED

BEFORE READING THE USER’S MANUAL

Make sure to check the following terms before reading the user’s manual.

Icons that will be used in manual

Icon Term Deﬁ nition

Z

DVD

This involves a function available with DVD or DVD-R(V)/DVD-RW(V)/+R discs

that have been recorded and ﬁ nalized.

X

RAM This involves a function available with DVD-RAM discs.

C

-RW This involves a function available with DVD-RW discs.

V

-R This involves a function available with DVD-R discs.

K

+RW This involves a function available with DVD+RW discs.

L

+R This involves a function available with DVD+R discs.

B

CD This involves a function available with a data CD (CD-R or CD-RW).

G

JPEG

This involves a JPEG function available with CD-R/-RW or DVD±R/±RW/-

RAM discs.

MPEG4

This involves an MPEG4 function available with DVD±R/±RW/-RAM discs.

A

MP3

This involves an MP3 function available with CD-R/-RW or DVD±R/±RW/-

RAM discs.

VHS This involves a function available with VIDEO Tape.

J

Caution

This involves a case where a function does not operate or settings may be

cancelled.

M

NOTE This involves tips or instructions on the page that help each function operate.

N

One-Touch

button

A function that can be operated by using only one button.

H

ANYKEY

button

A function that can be operated by using the ANYKEY button.

About the use of this user’s manual

Be sure to be familiarize yourself with the Safety Instructions before using this product. (See pages 2~7)

If a problem occurs, check the Troubleshooting section.

(See pages

80~82)

Copyright

written permission of Samsung Electronics Co.

1)

2)

375 eng 1-18.indd 11375 eng 1-18.indd 11 2008-2-18   02:27:222008-2-18   02:27:22

12_ getting started

getting started

HOW TO USE THE DVD RECORDER & VCR

Step 1 : Select the disc type

This unit can record on the following types of discs.

If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a

rewritable DVD±RW or DVD-RAM type disc. If you want to save a recording without making any changes,

choose a non-rewritable DVD±R.

Step 2 : Format the disc to start recording

Unlike a VCR, the recorder automatically starts formatting when an unused disc is inserted.

Using a DVD-RAM/±RW/+R

When an unused DVD-RAM/±RW/+R disc is ﬁ rst inserted, the message "Unformatted Disc. Formatting.

Please wait." will be displayed.

Using a DVD-R

It is not necessary to format a new DVD-R disc. When it is inserted, it will operate in Video mode.

It can also be formatted in VR mode in the setup menu.

You can change the disc mode only once when an unused disc is inserted.

You can only use either the VR or Video mode on a DVD-RW/-R, but not both at the same time.

You can format a DVD-RW/-R to V or VR mode using disc setting.

It should be noted that the disc's data will be lost when changing formats.

Step 3 : Recording

There are two different recording methods, Direct Recording(recording a program you are currently watching)

and Timer Recording.

Timer recording is classiﬁ ed as follows : Recording mode : HQ (high quality mode), HSP, SP (standard quality

mode), LSP, ESP, LP, EP, SLP (Long duration mode) according to the recording mode.

When recording is set in the AUTO mode, the best quality picture is recorded with regards to the remaining

time on the disc.

Step 4 : Playing

To start playback, select the title you want to play from the title list.

A DVD consists of sections called titles, and sub sections called chapters.

During recording, a title is created between two points where you start and stop recording. Chapters will be

created automatically regardless of the disc type when it is set at the setup menu.

Step 5 : Editing a recorded disc

Editing on discs is easier than conventional video tapes. The recorder supports many different edit functions,

possible only with DVDs.

With a simple and easy edit menu, you can operate various edit functions, such as delete, dubbing, rename,

lock, etc., on a recorded title.

M



375 eng 1-18.indd 12375 eng 1-18.indd 12 2008-2-18   02:27:222008-2-18   02:27:22

English _13

● GETTING STARTED

Creating a playlist (DVD-RAM/-RW/-R in VR mode)

With this recorder, you can create/edit a new playlist on the same disc without changing the original

recording.

Step 6 : Finalizing & Playing on other DVD components

To play your DVD on other DVD players, ﬁ nalizing may be necessary. First, ﬁ nish all editing and recording

operations, then ﬁ nalize the disc.

When using a DVD-RW/-R disc in VR Mode

Although ﬁ nalizing is generally unnecessary when playing the disc on a VR Mode compatible component, a

ﬁ nalized disc should be used for playback.

When using a DVD-RW/-R disc in Video Mode

The disc should be ﬁ nalized ﬁ rst to enable playback on anything other than this recorder. No more editing or

recording can be made on the disc once it has been ﬁ nalized.

When using a DVD+R disc

You should ﬁ nalize the disc to play it on other DVD players. No more editing or recording can be made on the

disc once it has been ﬁ nalized.

You can ﬁ nalize automatically using the EZ REC MODE. (See page 40)

UNPACKING

Accessories

Check for the supplied accessories below.

Video/Audio Cable

(AC39-00073A)

RF cable

(AC39-42001J)

Remote Control

(AK59-00084D)

Batteries for Remote Control (AAA Size)

(AC43-12002H)

Instruction Manual

(AK68-01549A)

Quick Guide

(AK68-01551A)

M



375 eng 1-18.indd 13375 eng 1-18.indd 13 2008-2-18   02:27:232008-2-18   02:27:23

14_ getting started

getting started

Connecting the Power Cord

After all connections are complete, plug the power cord into a wall outlet.

"Auto" appears in the panel display. This means that the current time is being set automatically (Auto

Program) through the antenna under connection and also the channel is being set. The setup may take a few

minutes.

When the DVD Recorder operates normally, the current time is automatically set and displayed in the front

panel display.

After the current time is set automatically, the recorder will perform Auto Preset for about 3 minutes. If power is on

before ﬁ nishing the Auto Preset process, Auto Preset will stop. In this case, do Auto Preset from MENU. (See page

31)

Preparing the Remote Control

If the remote control does not operate properly:

Check the polarity +

/- of the batteries.

Check if the batteries are drained.

Check if the remote sensor is blocked by obstacles.

Check if there is any ﬂ uorescent lighting nearby.

Dispose of batteries according to local environmental regulations.

Do not put them in the household trash.

M



•

Installing batteries in the Remote Control

1. Lift the cover at the back of the

remote control upward as shown.

2. Install two AAA size batteries.

Make sure to match the “+” and “–”

ends of the batteries with the diagram

inside the compartment.

3. Replace the cover.

Assuming typical TV usage,

the batteries last for about

one year.

375 eng 1-18.indd 14375 eng 1-18.indd 14 2008-2-18   02:27:242008-2-18   02:27:24

English _15

● GETTING STARTED

You can control part of another manufacturer’s TV functions with this remote control.

Buttons that can be controlled on your TV : TV POWER, INPUT SEL., TV VOL +/-, CH/TRK CH (,/.), TV

MUTE, 0~9,100+ Button.

To determine whether your television is compatible, follow the instructions below.

Switch your television on.

Point the remote control towards the television.

Press and hold the TV button and enter the two-ﬁ gure code simultaneously corresponding to the brand of

your television by pressing the appropriate number buttons.

Result: If your television is compatible with the remote control, it will switch off.

It is now

programmed to operate with the remote control.

If several codes are indicated for your television brand, try each one in turn until you ﬁ nd one that works. If you

replace the remote control’s batteries, you must set the brand code again.

You can then control the television using the following buttons.

Button Function

TV POWER Used to switch the television on and off.

INPUT SEL. Used to select an external source.

TV VOL +/- Used to adjust the volume of the television.

CH/TRK (,.) Used to select the desired channel.

TV MUTE Used to toggle the sound on and off.

0~9 Used to input number directly.

100+ Button Used to select channels over 100.

The various functions may not be able to be controlled on all televisions. If you encounter problems, operate the

television directly.

•

1.

2.

3.

M



M



BRAND CODES

SAMSUNG 01, 14, 15, 23, 31

DAEWOO 19

EMERSON 21

GRADIENTE 30

HITACHI 10

JVC 11

LG 06, 08, 18

LOEWE 28

MAGNAVOX 04

MITSUBISHI 13

BRAND CODES

NEWSAN 27

NOBLEX 25

PANASONIC 12, 24

RCA 07, 29

SANYO 05, 20

SHARP 02, 16, 22

SONY 03

TELEFUNKEN 26

TOSHIBA 09

ZENITH 17

375 eng 1-18.indd 15375 eng 1-18.indd 15 2008-2-18   02:27:262008-2-18   02:27:26

16_ getting started

getting started

Tour of the Remote Control

❋ This is a special remote control for the visually

impaired, and has Braille points on the

POWER(

), STOP( ) and PLAY( )

buttons.

Playback-related Buttons

Forward/Rewind, Search, Skip, Stop, Play, Pause.

TV VOL (Volume) Button

TV volume adjustment

ENTER/DIRECTION Buttons

(UP/DOWN or LEFT/RIGHT Buttons)

This button functions as a toggle switch.

INFO Button

Press this to display current setting or disc status.

TITLE LIST/DISC MENU Button

Press this to enter the TITLE LIST/Disc menu.

SUBTITLE Button

Press this to switch the DVD’s subtitle language.

ANYKEY Button

Press this to set the status of the disc that is being played.

AUDIO Button

Press this to access various audio functions. Selects one

of the audio tracks recorded on the disc

when pressed repeatedly.

DVD-RW(VR)/-R (VR) : Selects the main or sub sound.

DVD VIDEO : Selects the audio source.

TV MUTE Button

This operates as sound mute. (TV mode)

RETURN Button

Returns to a previous menu.

CH/TRK Button

Press this to adjust the tape tracking.

Use this to select a TV channel.

EXIT Button

Exit the current menu.

PLAY LIST/TITLE MENU Button

Press this to enter the Edit playlist/Title menu.

TV/VCR Button

If you press this button,the tuner will select the output.

(TV signal or VCR signal).

EZ REC MODE Button (See page 40)

Use this to set the EZ REC MODE.

MENU Button

Press this to bring up the DVD Recorder & VCR’s setup menu.

REC SPEED Button

Press this to set the desired recording time and picture quality.

TIMER REC Button

Press this when you use Timer Recording.

TO VCR DUBBING Button

Press this when you dubbing from the DVD to the VCR.

CANCEL Button

TV POWER Button

Press to power your TV on and off.

DVD Button

Press this when you use the DVD recorder/player.

POWER Button

Press to power the DVD Recorder & VCR on and off.

NUMBER Buttons

TV 100+ Button

Press this to select channels 100 or higher.on a TV.

F.ADV/SKIP Button

Press to skip a disc backwards or forwards.

REC Button

Press this to make a recording on VCR, DVD-RAM/±RW/±R discs.

TO DVD DUBBING Button

Press this when you dubbing from the VCR to the DVD.

VCR Button

Press this when you use the VCR.

OPEN/CLOSE Button

Press this to open and close the disc tray.

TV Button

Press this to operate your TV.

INPUT SEL. Button

Press this to select the AV input signal in external input

mode. (AV input, DV input).

375 eng 1-18.indd 16375 eng 1-18.indd 16 2008-2-18   02:27:262008-2-18   02:27:26

English _17

● GETTING STARTED

DESCRIPTION

Front Panel

DVD OPEN/CLOSE BUTTON VCR DECK VCR EJECT BUTTON

CH (./,), SEARCH/SKIP BUTTON

PLAY/PAUSE BUTTON STOP BUTTON

RECORD BUTTON DUBBING BUTTON DVD/VCR SELECT BUTTON

FRONT PANEL DISPLAY DVD DECK DV INPUT JACK

AUDIO L, R INPUT JACKS

(AV 2 IN)

VIDEO INPUT JACK (AV 2 IN) POWER BUTTON

10 11 12

13 14 15

375 eng 1-18.indd 17375 eng 1-18.indd 17 2008-2-18   02:27:272008-2-18   02:27:27

18_ getting started

getting started

Front Panel Display

Playback-related indicator In Disc Indicator

DVD VIEW Indicator

VCR VIEW Indicator

Disc Media Indicator TIMER Indicator

HDMI Indicator REC Indicator STATUS Indicator

Rear Panel

HDMI OUT VIDEO INPUT JACK (AV 1 IN) VIDEO OUT JACK (AV OUT)

AUDIO OUT JACKS

(COMPONENT OUT)

COMPONENT VIDEO OUT JACKS ANT IN JACK

DIGITAL AUDIO OUT JACK

(COAXIAL)

AUDIO OUT JACKS (AV OUT) AUDIO INPUT JACKS (AV 1 IN)

375 eng 1-18.indd 18375 eng 1-18.indd 18 2008-2-18   02:27:282008-2-18   02:27:28

English

_19

● CONNECTING & SETTING UP

Connecting & Setting up

CONNECTING THE ANTENNA CABLE

There are several ways to connect your DVD Recorder & VCR. Select the antenna connection that best suits you

below.

Antenna + DVD Recorder & VCR + TV: No Cable box

You can record non-scrambled channels by selecting the channel on the DVD Recorder & VCR. Also use

this method if you watch channels without a cable box.

If you are using an off-air antenna that has 300-ohm twin ﬂ at leads, use an external antenna connector (300-75 ohm

adaptor : not supplied) to connect the antenna to the DVD Recorder & VCR.

If you have two separate antennas (one VHF and the other UHF), use a UHF/VHF combineradaptor (available at most

electronics shops) to connect the antenna to the DVD Recorder & VCR.

J



Wall

TO ANT OUT

TO ANT INPUT

RF Cable

(supplied)

375 eng 19-28 1.indd 19375 eng 19-28 1.indd 19 2008-2-18   02:29:362008-2-18   02:29:36

20_ connecting & setting up

connecting & setting up

Antenna + Cable box + DVD Recorder & VCR + TV : Cable box with

many scrambled channels.

You can record channels by selecting the channel on the cable box. You cannot record one channel while

watching another channel. Be sure that the cable box is turned on.

IN

OUT

Wall

TO ANT IN

TO ANT OUT

TO ANT INPUT

Cable box

375 eng 19-28 1.indd 20375 eng 19-28 1.indd 20 2008-2-18   02:29:382008-2-18   02:29:38

La page est en cours de chargement...

Samsung DVD-VR375 Le manuel du propriétaire

Samsung DVD-VR375 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents