LG 24LM520S-WU Manuel utilisateur

Marque: LG

Modèle: 24LM520S-WU

Taper: Manuel utilisateur

Ce manuel convient également à

*MFL70524104*

www.lg.com

AAA

24LM530S

LED TV

TÉLÉVISEUR À DEL

TV MONITOR LED

DC-IN

(19 V )

DC-IN

(19 V )

(2002-REV00)

Printed in Korea

English

Read Safety and Reference.

Français

Lire le document Sécurité et références.

Español

Leer Seguridad y referencias.

English Easy Setup Guide

Please read this manual carefully before operating your set and retain it for future reference.

Français Guide de configuration rapide

Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver an de pouvoir le consulter

ultérieurement.

Español Guía Rápida de Configuración

Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas.

: Depending on model / Selon le modèle / Según el modelo

English

MODELS 24LM530S

Dimensions

(W x H x D)

With stand

563.1 x 393.8 x 148.6 (mm)

22.1 x 15.5 x 5.8 (inches)

Without stand

563.1 x 340.9 x 58 (mm)

22.1 x 13.4 x 2.2 (inches)

Weight

With stand 3.6 kg (7.9 lbs)

Without stand 3.25 kg (7.1 lbs)

Français

MODÈLES 24LM530S

Dimensions

(L x H x P)

Avec socle

563,1 x 393,8 x 148,6 (mm)

22,1 x 15,5 x 5,8 (po)

Sans socle

563,1 x 340,9 x 58 (mm)

22,1 x 13,4 x 2,2 (po)

Poids

Avec socle 3,6 kg (7,9 lb)

Sans socle 3,25 kg (7,1 lb)

Español

MODELOS 24LM530S

Dimensiones

(Ancho x Altura x Profundidad)

Con base 563,1 x 393,8 x 148,6 (mm)

Sin base 563,1 x 340,9 x 58 (mm)

Peso

Con base 3,6 kg

Sin base 3,25 kg

Consumo de potencia (Predeterminado) 26 W

Alimentación requerida 19 V

2,0 A

Adaptador de CA-CC

Entrada AC 100 – 240 V ~ 50/60 Hz

Salida 19 V

2,1 A

VIDEO

AUDIO

AUDIO OUT

DVI OUT

USB IN

HDMI OUT

www.lg.com

Printed in Korea

*MFL69376206*

(2002-REV01)

24LM520S

28LM520S

24LM500S

24LM530S

* LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your TV and retain it for

future reference.

OWNER’S MANUAL

Safety and Reference

(LED TV*)

ENGLISH

Table of contents

Important safety instructions -------------------3

Licenses

-----------------------------------------------7

Open Source Software Notice Information

---7

Preparing

---------------------------------------------7

Lifting and moving the TV

------------------------ 8

Setting up the TV

-----------------------------------8

Using the button

------------------------------------ 9

Mounting on a table

-------------------------------9

Mounting on a wall

------------------------------- 10

Connections (Notications)

-------------------- 12

Remote control

------------------------------------ 13

Troubleshooting

---------------------------------- 14

Specications

-------------------------------------- 15

Regulatory

------------------------------------------ 16

Important safety

instructions

Always comply with the following precautions to avoid dangerous

situations and ensure peak performance of your product.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER

(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

The lightning ash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated dangerous voltage within the product’s

enclosure that may be of sucient magnitude to constitute a risk

of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the device.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT

EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may be seriously injured

or there is a possibility of accident or death.

CAUTION

If you ignore the caution message, you may be slightly injured or

the product may be damaged.

NOTE

The note helps you understand and use the product safely.

Please read the note carefully before using the product.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

y Do not use this apparatus near water.

y Clean only with dry cloth.

y Do not block any ventilation openings. Install in accordance with

the manufacturer’s instructions.

y Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliers) that

produce heat.

y Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than

the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided

for your safety. If the provided plug does not t into your outlet,

consult an electrician for replacement of the obsolete outlet.

ENGLISH

y Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

y Only use attachments/accessories specied by the manufacturer.

y Use only with the cart, stand, tripod, bracket, or table specied by

the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

y Unplug this apparatus during lightning storms or when unused for

long periods of time.

y Refer all servicing to qualied service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has

been dropped.

y Do not press strongly upon the panel with a hand or a sharp object

such as a nail, pencil, or pen, or make a scratch on it.

y Do not stick metal objects or any other conductive material into

the power cord. Do not touch the end of the power cord while it

is plugged in.

y Keep the packing anti-moisture material or vinyl packing out

of the reach of children. Anti-moisture material is harmful if

swallowed. If swallowed, induce vomiting and go to the nearest

hospital. Additionally, vinyl packing can cause suocation. Keep it

out of the reach of children.

y CAUTION concerning the Power Cord (Can dier by country):

Check the specication page of this owner’s manual to be certain

concerning current requirements. Do not connect too many

devices to the same AC power outlet as this could result in re

or electric shock. Do not overload wall outlets. Overloaded wall

outlets, loose or damaged wall outlets, extension cords, frayed

power cords, or damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric shock or re.

Periodically examine the cord of your device, and if its appearance

indicates damage or deterioration, unplug it, discontinue use of

the device, and have the cord replaced with an exact replacement

part by an authorized servicer. Protect the power cord from

physical or mechanical abuse, such as being twisted, kinked,

pinched, closed in a door, or walked upon. Pay particular attention

to plugs, wall outlets, and the point where the cord exits the

device. Do not move the TV with the power cord plugged in. Do

not use a damaged or loose power cord. Be sure to grasp the plug

when unplugging the power cord. Do not pull on the power cord

to unplug the TV.

y Warning - To reduce the risk of re or electrical shock, do not

expose this product to rain, moisture or other liquids. Do not touch

the TV with wet hands. Do not install this product near ammable

objects such as gasoline or candles, or expose the TV to direct air

conditioning.

y Do not expose to dripping or splashing and do not place objects

lled with liquids, such as vases, cups, etc. on or over the

apparatus (e.g., on shelves above the unit).

ENGLISH

y Grounding

- (Except for devices which are not grounded.)

Ensure that you connect the earth ground wire to prevent

possible electric shock (i.e., a TV with a three-prong grounded

AC plug must be connected to a three-prong grounded AC

outlet).

If grounding methods are not possible, have a qualied

electrician install a separate circuit breaker. Do not try to

ground the unit by connecting it to telephone wires, lightning

rods, or gas pipes.

Circuit

Breaker

Power Supply

y As long as this unit is connected to the AC wall outlet, it is not

disconnected from the AC power source even if the unit is turned

o.

y Do not attempt to modify this product in any way without written

authorization from LG Electronics. Unauthorized modication

could void the user’s authority to operate this product.

y Outdoor Antenna Grounding

- (Can dier by country):

If an outdoor antenna is installed, follow the precautions

below. An outdoor antenna system should not be located in

the vicinity of overhead power lines or other electric light or

power circuits, or where it can come in contact with such power

lines or circuits as death or serious injury can occur. Be sure

the antenna system is grounded to provide some protection

against voltage surges and built-up static charges. Section

810 of the National Electrical Code (NEC) in the U.S.A. provides

information with respect to proper grounding of the mast

and supporting structure, grounding of the lead-in wire to an

antenna discharge unit, size of grounding conductors, location

of antenna discharge unit, connection to grounding electrodes,

and requirements for the grounding electrode.

y Antenna grounding according to the National Electrical

Code, ANSI/NFPA 70

Ground Clamp

Grounding Conductor

(NEC Section 810-21)

Antenna Lead in Wire

Electric Service

Equipment

Antenna Discharge Unit

(NEC Section 810-20)

Ground Clamp

Power Service

Grounding

Electrode System

(NEC Art 250, Part H)

NEC: National Electrical Code

y Cleaning

- When cleaning, unplug the power cord and wipe gently with

a soft cloth to prevent scratching. Do not spray water or other

liquids directly on the TV as electric shock may occur. Do not

clean with chemicals such as alcohol, thinners, or benzene.

y Moving

- Make sure the product is turned o, unplugged, and all cables

have been removed. It may take 2 or more people to carry larger

TVs. Do not press or put stress on the front panel of the TV.

y Ventilation

- Install your TV where there is proper ventilation. Do not install

in a conned space such as a bookcase. Do not cover the

product with cloth or other materials while plugged in. Do not

install in excessively dusty places.

y If you smell smoke or other odors coming from the TV, unplug the

power cord and contact an authorized service center.

y If water or another substance enters the product (like an AC

adapter, power cord, or TV), disconnect the power cord and contact

the service center immediately. Otherwise, this may result in re

or electric shock.

y Use only an authorized AC adapter and power cord approved by

LG Electronics.

Otherwise, this may result in re, electric shock, malfunction, or

product deformation.

y Never disassemble the AC adapter or power cord. This may result in

re or electric shock.

ENGLISH

y Handle the adapter carefully to avoid dropping or striking it. An

impact could damage the adapter.

y Keep the product away from direct sunlight.

y Never touch this apparatus or antenna during a lightning storm.

y When mounting a TV on the wall, make sure not to install the TV

by hanging the power and signal cables on the back of the TV.

y Do not allow an impact shock or any objects to fall into the

product, and do not drop anything onto the screen.

y Disconnecting the Device from the Main Power

- The power plug is the disconnecting device. In case of an

emergency, the power plug must remain readily accessible.

y Make sure the power cord is connected securely to the power plug

on the TV.

y Batteries

Store the accessories (battery, etc.) in a safe location out of the

reach of children.

y This apparatus uses batteries. In your community there might be

regulations that require you to dispose of these batteries properly

due to environmental considerations. Please contact your local

authorities for disposal or recycling information.

y Do not dispose of batteries in a re.

y Do not short circuit, disassemble, or allow the batteries to

overheat.

y Do not use high voltage electrical equipment near the TV, (e.g., a

bug zapper).

This may result in product malfunction.

y Dot Defect

- The panel is a high technology product with resolution of two

million to six million pixels. In a very few cases, you could see

ne dots on the screen while you’re viewing the TV. Those dots

are deactivated pixels and do not aect the performance and

reliability of the TV.

y Generated Sound

- Cracking noise A cracking noise that occurs when watching

or turning o the TV is generated by plastic thermal contraction

due to temperature and humidity. This noise is common for

products where thermal deformation is required.

- Electrical circuit humming/panel buzzing

A low level noise is generated from a high-speed switching

circuit, which supplies a large amount of current to operate a

product. It varies depending upon the product. This generated

sound does not aect the performance and reliability of the

product.

y Take care not to touch the ventilation openings. When watching

the TV for a long period, the ventilation openings may become

hot. This does not aect the performance of the product or cause

defects in the product.

y Do not install this product on a wall if it could be exposed to oil or

oil mist. This may damage the product and cause it to fall.

y If the TV feels cold to the touch, there may be a small icker when

it is turned on. This is normal; there is nothing wrong with TV.

Some minute dot defects may be visible on the screen, appearing

as tiny red, green, or blue spots. However, they have no adverse

eect on the TV’s performance. Avoid touching the LCD screen or

holding your nger(s) against it for long periods of time. Doing so

may produce some temporary distortion eects on the screen.

y Displaying a still image for a prolonged time may cause image

sticking. Avoid displaying a xed image on the TV screen for a long

period of time.

ENGLISH

Licenses

Supported licenses may dier by model. For more information about

licenses, visit www.lg.com

Open Source Software

Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open

source licenses, that is contained in this product, please visit

http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty

disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM

for a charge covering the cost of performing such distribution (such

as the cost of media, shipping, and handling) upon email request to

opensourc[email protected].

This oer is valid for a period of three years after our last shipment

of this product. This oer is valid to anyone in receipt of this

information.

Preparing

NOTE

(Depending upon model)

y If the TV is turned on for the rst time after it was shipped from

the factory, initialization of the TV may take a few minutes.

y Image shown may dier from your TV.

y Your TV’s OSD (On Screen Display) may dier slightly from that

shown in this manual.

y The available menus and options may dier from the input source

or product model that you are using.

y New features may be added to this TV in the future.

y The items supplied with your product may vary depending upon

the model.

y Product specications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

y For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm (0.3 inches) thick and 18 mm (0.7

inches) width.

y Use an extension cable that supports USB 2.0 if the USB cable or

USB ash drive does not t into your TV’s USB port.

y Use a certied cable with the HDMI logo attached. If you do

not use a certied HDMI cable, the screen may not display or a

connection error may occur.

y Recommended HDMI cable types

- High-Speed HDMI

/™ cable

- High-Speed HDMI

/™ cable with Ethernet

*A 10 mm (0.3 inches)

*B 18 mm (0.7 inches)

y This Smart TV is for VOD (Video On Demand) service, some smart

functions may not be supported including web browser.

CAUTION

y Do not use any unapproved items to ensure the safety and

product’s lifespan.

y Any damages or injuries by using unapproved items are not

covered by the warranty.

y When attaching the stand to the TV set, place the screen facing

down on a cushioned table or at surface to protect the screen

from scratches.

ENGLISH

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the

TV from being scratched or damaged and for safe transportation

regardless of its type and size.

y It is recommended to move the TV in the box or packing material

that the TV originally came in.

y Before moving or lifting the TV, disconnect the power cord and

all cables.

y When holding the TV, the screen should face away from you to

avoid damage.

y Hold the top and bottom of the TV frame rmly. Make sure not to

hold the transparent part, speaker, or speaker grille area.

y When transporting the TV, do not expose the TV to jolts or

excessive vibration.

y When transporting the TV, keep the TV upright; never turn the TV

on its side or tilt towards the left or right.

y Do not apply excessive pressure to cause exing /bending of frame

chassis as it may damage screen.

CAUTION

y Avoid touching the screen at all times, as this may result in

damage to the screen.

y Do not place the product on the oor with its front facing down

without padding. Failure to do so may result in damage to the

screen.

y When handling the TV, be careful not to damage the protruding

buttons. (Depending upon model)

Setting up the TV

CAUTION

y When attaching the stand to the TV set, place the screen facing

down on a cushioned table or at surface to protect the screen

from scratches.

y Do not carry the TV upside-down by holding the stand body (or

stand base) as this may cause it to fall o, resulting in damage

or injury.

y Do not apply foreign substances (oils, lubricants, etc.) to the screw

parts when assembling the product. (Doing so may damage the

product.)

NOTE

y Remove the stand before installing the TV on a wall mount by

performing the stand attachment in reverse.

ENGLISH

Using the button

You can simply operate the TV functions, using the button.

y Image shown may dier from your TV.

Basic Functions

Power On (Press)

Power O

(Press and hold)

Menu Control (Press

)

Menu Selection (Press and Hold

)

1 All running apps will close.

2 You can access and adjust the menu by pressing the button when

TV is on.

3 You can use the function when you access menu control.

Adjusting the Menu

When the TV is turned on, press the button one time. You can adjust

the menu items using the buttons.

Turns the power o.

Changes the input source.

Adjusts the volume level.

Scrolls through the saved channels.

Mounting on a table

1 Lift and tilt the TV into its upright position on a table.

- Leave a 100 mm (3.9 inches) (minimum) space from the wall

for proper ventilation.

100 mm (3.9 inches)

100 mm

2 Connect the AC-DC Adapter and Power Cord to a wall outlet.

CAUTION

y Do not place the TV near or on sources of heat, as this may result in

re or other damage.

y Please be sure to connect the TV to the AC/DC power adapter

before connecting the TV’s power plug to a wall power outlet.

ENGLISH

Using the kensington security system

(optional)

(This is not available for all models.)

y Image shown may dier from your TV.

The Kensington security system connector is located at the rear of

the TV. For more information of installation and using, refer to the

manual provided with the Kensington security system or visit

http://www.kensington.com. Connect the Kensington security system

cable between the TV and a table.

NOTE

y The Kensington security system is optional. You can obtain

additional accessories from your local dealer.

Mounting on a wall

An optional wall mount can be used with your LG Television. Consult

with your local dealer for a wall mount that supports the VESA

standard used by your TV model. Carefully attach the wall mount

bracket at the rear of the TV. Install the wall mount bracket on a solid

wall perpendicular to the oor. If you are attaching the TV to other

building materials, please contact qualied personnel to install the

wall mount. Detailed instructions will be included with the wall

mount. We recommend that you use an LG brand wall mount. The LG

wall mount is easy to adjust or to connect the cables. When you do

not use LG’s wall mount bracket, use a wall mount bracket where the

device is adequately secured to the wall with enough space to allow

connectivity to external devices. If you are using a non-adjustable

mount, attach the mount to the wall. Attach the cables to the TV rst,

then attach the TV to the mount.

100 mm (3.9 inches)

100 mm

Make sure to use screws and wall mounts that meet the VESA

standard. Standard dimensions for the wall mount kits are described

in the following table.

Model

24LM520S

24LM500S

24LM530S

28LM520S

Wall mount (A x B)

75 x 75 100 x 100

Standard screw M4 x L10

Number of screws 4

Wall mount bracket

(optional)

LSW149

ENGLISH

CAUTION

y Must use the enclosed screw in the box. (Depending upon model)

y Disconnect the power before moving or installing the TV.

Otherwise electric shock may occur.

y Remove the stand before installing the TV on a wall mount by

performing the stand attachment in reverse.

y If you install the TV on a ceiling or slanted wall, it may fall and

result in severe injury. Use an authorized LG wall mount and

contact the local dealer or qualied personnel. When using a third-

party wall mount, it is not covered by the warranty.

y Do not overtighten the screws as this may cause damage to the TV

and void your warranty.

y Use the screws and wall mounts that meet the VESA standard. Any

damages or injuries by misuse or using an improper accessory are

not covered by the warranty.

y Screw length from outer surface of back cover should be less than

8 mm (0.3 inches).

Wall mount Pad

Back Cover

Standard screw:

M4 x L10

Wall mount Pad

Back Cover

Max. 8 mm (0.3 inches)

NOTE

y Use the screws that are listed on the VESA standard screw

specications.

y The wall mount kit includes an installation manual and necessary

parts.

y The wall mount bracket is optional. You can obtain additional

accessories from your local dealer.

y The length of screws may dier depending upon the wall mount.

Make sure to use the proper length.

y For more information, refer to the manual supplied with the wall

mount.

ENGLISH

Connections (Notications)

You can connect various external devices to the TV. Supported

external devices are: HD receivers, DVD players, VCRs, audio systems,

USB storage devices, PC, gaming devices, and other external devices.

For more information on an external device’s connection, refer to the

manual provided with each device.

NOTE

y The external device connections shown may dier slightly from

illustrations in a manual.

y Connect external devices to the TV regardless about the order of

the TV port.

y If you record a TV program on a DVD recorder or VCR, make sure to

connect the TV signal input cable to the TV through a DVD recorder

or VCR. For more information about recording, refer to the manual

provided with the connected device.

y If you connect a gaming device to the TV, use the cable supplied

with the gaming device.

y Refer to the external equipment’s manual for operating

instructions.

y In PC mode, there may be noise associated with the resolution,

vertical pattern, contrast, or brightness. If noise is present,

change the PC output to another resolution, change the refresh

rate to another rate, or adjust the brightness and contrast on the

[PICTURE] menu until the picture is clear.

y Depending upon the graphics card, some resolution settings may

not allow the image to be positioned on the screen properly.

Connecting to an antenna or cable

Connect an antenna, cable, or cable box to watch TV. The illustrations

may dier from the actual items and an RF cable is optional.

CAUTION

y Make sure not to bend the copper wire of the RF cable.

Copper wire

y Complete all connections between devices, and then connect the

power cord to the power outlet to prevent damage to your TV.

NOTE

y Use a signal splitter to use 2 TVs or more.

y DTV Audio Supported Codec: MPEG, Dolby Digital.

PC connection

When connecting your PC to the HDMI input, set the HDMI input’s

[Input Label] to [PC].

(Inputs) [All Inputs] [EDIT ICON] [PC]

Other connections

Connect your TV to external devices. For the best picture and audio

quality, connect the external device and the TV with the HDMI cable.

Some separate cable is not provided.

y USB port supports 0.5 A electric current. If you need more electric

current in case of HDD, use the separate power adaptor.

y Supported HDMI Audio format:

Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz),

DTS (44.1 kHz, 48 kHz), PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz,

192 kHz) (Depending upon model)

ENGLISH

Remote control

(Some buttons and services may not be provided depending upon

models or regions.)

The descriptions in this manual are based on the buttons on the

remote control. Please read this manual carefully and use the TV

correctly.

To install batteries, open the battery cover, replace batteries (1.5

V AAA) matching the

and ends to the label inside the

compartment, and close the battery cover. To remove the batteries,

perform the installation actions in reverse.

Make sure to point the remote control toward the remote control

sensor on the TV.

* To use the button, press and hold for more than 3 seconds.

(Power) Turns the TV on or o.

(Inputs) Changes the input source.

Activates or deactivates the subtitles.

(User Guide) Sees user-guide.

(Search) Shows the search mode.

Returns to the last TV channel.

Number buttons Enters numbers.

(Dash) Inserts a dash between numbers such as 2-1 and 2-2.

Accesses the saved channel list.

Alternates between the two last channels selected.

(pressing repeatedly)

* You can access apps or Live TV using the number

buttons corresponding to the features.

Adjusts the volume level.

Accesses your favorite channel list.

Views the information of the current program and screen.

(Mute) Mutes all sounds.

* Accesses the [Accessibility] menu.

Scrolls through the saved channels.

Moves to the previous or next screen.

Streaming Service buttons Connects to the Video Streaming

Service.

(Home) Accesses the Home menu.

* Shows the previous history.

(Settings) Accesses the settings.

By zooming in on the selected area, you can view it

in full screen.

Navigation buttons (up/down/left/right) Scrolls through

menus or options.

Selects menus or options and conrms your input.

Returns to the previous screen.

Clears on-screen displays and returns to TV viewing.

Enables SAP (Secondary Audio Program) Feature.

Sets the length of time until the TV to turns o.

* Provides content related to the program you are

currently watching.

(Control buttons) Controls the media

contents.

These access special functions in some menus.

ENGLISH

Troubleshooting

Cannot control the TV with the remote control.

y Check if anything such as tape has been placed over the receiver.

y Check if there is any obstacle between the product and the remote

control.

y Replace the batteries with new ones.

No image display and no sound is produced.

y Check if the product is turned on.

y Check if the power cord is connected to a wall outlet.

y Check if there is a problem in the wall outlet by connecting other

products.

The TV turns o suddenly.

y Check the power control settings. The power supply may be

interrupted.

y Check if the auto-o function is activated on the settings related

time.

y If there is no signal while the TV is on, the TV will turn o

automatically after 15 minutes of inactivity.

When connecting to the PC (HDMI), no signal is detected.

y Turn the TV o/on using the remote control.

y Reconnect the HDMI cable.

y Restart the PC with the TV on.

If TV is turned o automatically.

y If [Timer Power On] is enabled, the TV will be turned on at the

specied time. If you do not operate the TV for two hours, the TV

will be turned o automatically.

y To disable this function, use your remote control to go to (Settings)

[General] [Timers] [2 Hours Auto Power O] [O].

ENGLISH

Specications

Product specications may be changed without prior notice due to upgrade of product functions.

Models

Dimensions (W x H x D) Weight

Power

consumption

(Outgoing

condition)

Power

requirement

With stand Without stand

With

stand

Without

stand

24LM520S

24LM500S

563.1 x 367 x 150.1 (mm) 563.1 x 340.9 x 58 (mm) 3.3 (kg) 3.25 (kg)

26 W 19 V

2.0 A

22.1 x 14.4 x 5.9 (inches) 22.1 x 13.4 x 2.2 (inches) 7.2 (lbs) 7.1 (lbs)

28LM520S

649.4 x 420 x 150.1 (mm) 649.4 x 393.8 x 61.4 (mm) 4.55 (kg) 4.5 (kg)

30 W 19 V

2.0 A

25.5 x 16.5 x 5.9 (inches) 25.5 x 15.5 x 2.4 (inches) 10.0 (lbs) 9.9 (lbs)

24LM530S

563.1 x 393.8 x 148.6 (mm) 563.1 x 340.9 x 58 (mm) 3.6 (kg) 3.25 (kg)

26 W 19 V

2.0 A

22.1 x 15.5 x 5.8 (inches) 22.1 x 13.4 x 2.2 (inches) 7.9 (lbs) 7.1 (lbs)

Wireless module (LGSWFAC71) Specications

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency Range Output Power (Max.)

2400 to 2483.5 MHz

5150 to 5725 MHz

5725 to 5850 MHz

15 dBm

14.5 dBm

y As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is congured for the regional

frequency table.

y For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the

device and the body.

y FCC ID: BEJLGSWFAC71 / IC: 2703H-LGSWFAC71

AC/DC Adapter

Manufacturer: Lien Chang

Model: LCAP16B-A

Manufacturer: Honor

Model: ADS-45FSN-19 19040GPCU

In: AC 100 – 240 V ~ 50/60 Hz

Out: DC 19 V

2.1 A

Environment condition

Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)

Operating Humidity Less than 80 %

Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F)

Storage Humidity Less than 85 %

Television system ATSC, NTSC-M, 64 & 256 QAM

Program coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135

External antenna impedance 75 Ω

ENGLISH

FCC Radio Frequency Interference

Requirements (for UNII devices)

High power radars are allocated as primary users of the 5.25 to 5.35

GHz and 5.65 to 5.85 GHz bands. These radar stations can cause

interference with and/or damage this device. This device cannot be

co-located with any other transmitter.

FCC RF Radiation Exposure Statement

[For having wireless function (WLAN, Bluetooth,...)]

This equipment complies with FCC radiation exposure limits set

forth for an uncontrolled environment. This transmitter must not be

co-located or operating in conjunction with any other antenna or

transmitter.

This equipment should be installed and operated with minimum

distance 20 cm (7.8 inches) between the antenna and your body.

Users must follow the specic operating instructions for satisfying RF

exposure compliance.

Industry Canada Statement

(For Canada)

[For having wireless function (WLAN, Bluetooth,...)]

This device contains licence-exempt transmitter(s)/receiver(s)

that comply with Innovation, Science and Economic Development

Canada’s licence-exempt RSS(s). Operation is subject to the following

two conditions:

1) This device may not cause interference.

2) This device must accept any interference, including interference

that may cause undesired operation of the device.

IC Radiation Exposure Statement

(For Canada)

[For having wireless function (WLAN, Bluetooth,...)]

This equipment complies with IC radiation exposure limits set forth

for an uncontrolled environment. This equipment should be installed

and operated with minimum distance 20 cm (7.8 inches) between

the antenna & your body.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO

OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS

TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S

AUTHORITY TO OPERATE THE EQUIPMENT.

Regulatory

FCC Notice

(For USA)

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment o

and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the

receiver.

- Connect the equipment to an outlet on a circuit dierent from

that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for

help.

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not cause

harmful interference and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Any changes or modications in construction of this device which are

not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

ENGLISH

RSS-247 Requirement

(For Canada)

[For product having the wireless function using 5 GHz frequency

bands]

i. the device for operation in the band 5150–5250 MHz is only for

indoor use to reduce the potential for harmful interference to co-

channel mobile satellite systems;

ii. for devices with detachable antenna(s), the maximum antenna

gain permitted for devices in the bands 5250-5350 MHz and 5470-

5725 MHz shall be such that the equipment still complies with the

e.i.r.p. limit;

iii. for devices with detachable antenna(s), the maximum antenna

gain permitted for devices in the band 5725-5850 MHz shall be

such that the equipment still complies with the e.i.r.p. limits as

appropriate; and

iv. [for devices operating in the band 5250-5350 MHz having an e.i.r.p.

greater than 200 mW] antenna type(s), antenna models(s), and

worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p.

elevation mask requirement set forth in section 6.2.2.3 of RSS-247

shall be clearly indicated.

Users should also be advised that high-power radars are allocated as

primary users (i.e. priority users) of the bands 5250-5350 MHz and

5650-5850 MHz and that these radars could cause interference and/or

damage to LE-LAN devices.

Note to Cable/TV Installer

(For USA and Canada)

This reminder is provided to call the CATV system installer’s attention

to Article 820-40 of the National Electric Code (U.S.A.). The code

provides guidelines for proper grounding and, in particular, species

that the cable ground shall be connected to the grounding system of

the building, as close to the point of the cable entry as practical.

ENGLISH

Service

Unplug the monitor from the wall outlet and refer servicing to

qualied service personnel when:

y The power cord or plug is damaged or frayed.

y Liquid has been spilled into the monitor.

y The monitor has been exposed to rain or water.

y The monitor does not operate normally following the operating

instructions. Adjust only those controls that are covered in the

operating instructions. An improper adjustment of other controls

may result in damage and often requires extensive work by a

qualied technician to restore the monitor to normal operation.

y The monitor has been dropped or the cabinet has been damaged.

y The monitor exhibits a distinct change in performance.

y Snapping or popping from the monitor is continuous or frequent

while the monitor is operating. It is normal for some monitors to

make occasional sounds when being turned on or o, or when

changing video modes.

Do not attempt to service the monitor yourself, as opening or

removing covers may expose you to dangerous voltage or other

hazards. Refer all servicing to qualied service personnel.

WARNING!

Never place a television set in an unstable location. A television set

may fall, causing serious personal injury or death. Many injuries,

particularly to children, can be avoided by taking simple precautions

such as:

y Using cabinets or stands recommended by the manufacturer of

the television set.

y Only using furniture that can safely support the television set.

y Ensuring the television set is not overhanging the edge of the

supporting furniture.

y Not placing the television set on tall furniture (for example,

cupboards or bookcases) without anchoring both the furniture and

the television set to a suitable support.

y Not placing the television set on cloth or other materials that may

be located between the television set and supporting furniture.

y Educating children about the dangers of climbing on furniture to

reach the television set or its controls.

If your existing television set is being retained and relocated, the

same considerations as above should be applied.

Symbols

Refers to alternating current (AC).

Refers to direct current (DC).

Refers to class II equipment.

Refers to stand-by.

Refers to “ON” (power).

Refers to dangerous voltage.

ENGLISH

La page charge ...

LG 24LM520S-WU Manuel utilisateur

Marque: LG

Modèle: 24LM520S-WU

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: LG 24LM520S-WU User manual

LG 24LM520S-WU Manuel utilisateur

Ce manuel convient également à

LG 24LM520S-WU Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents