Pioneer FS-W40 Manuel utilisateur

English

Français

Español

Italiano Deutsch Nederlands

Language select / Sélection de la langue / Selección de idioma / Selezione lingua / Sprachauswahl / Taal selecteren

FS-W40

E

N

Before Start

What's in the box .................................................................... 2

Part Names

Front Panel ............................................................................. 3

Rear Panel .............................................................................. 4

Remote Controller .................................................................. 5

Display .................................................................................... 6

Wireless Satellite Speakers .................................................... 7

Install

1. Install the Wireless Satellite Speakers ................................ 8

2. Connect the TV ................................................................... 9

3. Connect the AV Components ........................................... 10

4. Connect Other Cables .......................................................11

Setup

Initial Setup with Auto Start-up Wizard ................................. 12

System Setup ....................................................................... 14

AV Adjust .............................................................................. 23

Playback

AV Component Playback ...................................................... 25

Internet Radio ....................................................................... 26

Spotify ................................................................................... 27

Music Server ......................................................................... 28

USB Storage Device ............................................................. 30

BLUETOOTH

®

Playback ......................................................32

Listening to the FM Radio ..................................................... 33

Listening Modes ................................................................... 35

Supplementary information

Supplementary information for player functions ................... 45

Firmware Update

Update Functions ................................................................. 46

How to update firmware ........................................................ 47

Others

Troubleshooting .................................................................... 50

License and Trademark ........................................................ 55

General Specifications .......................................................... 56

About HDMI .......................................................................... 58

> Before Start > Part Names > Install > Setup > Playback

Supplementary information | Firmware Update | Others

Freestyle Sound System

FS-W40

Instruction

Manual

SN29402599_FS-W40_En_1606XX.book 1 ページ２０１７年３月２９日　水曜日　午後９時３１分

2

> Before Start > Part Names > Install > Setup > Playback

Supplementary information | Firmware Update | Others

E

N

What's in the box

0 The power cord of sound system controller must be connected only after all other cable

connections are completed.

0 We will not accept responsibility for damage arising from the connection of equipment

manufactured by other companies.

0 Functionality may be introduced by firmware updates and service providers may cease

services, meaning that some network services and content may become unavailable in

the future. Furthermore, available services may vary depending on your area of

residence.

0 Specifications and appearance are subject to change without prior notice.

0 When submitting the sound system controller or the speakers for repairs, please submit

both the sound system controller and the speakers.

Sound System Controller AC-400 (1)

Wireless Satellite Speakers FS-400 (2)

Remote controller (RC-932S) (1), batteries (AAA/R03) (2)

Indoor FM antenna (1)

Power cords (2)

Before Start

SN29402599_FS-W40_En_1606XX.book 2 ページ２０１７年３月２９日　水曜日　午後９時３１分

> Before Start >Part Names > Install > Setup > Playback

Supplementary information | Firmware Update | Others

3

E

N

Front Panel

1. Remote control sensor

2. Display (P6)

3. Í/l button: Turns the unit on or into standby mode.

4. VOLUME button: Allows you to adjust the volume. These buttons also cancel muting.

5. ON indicator: This lights blue when the power is on and goes out when the unit switches

to standby. It lights red if the unit enters standby mode when the features are enabled that

continue to work when this unit is in standby, such as HDMI Standby Through and

Wireless Speaker Standby.

6. NETWORK indicator: This lights blue when network features are being used. It will flash if

the connection to the network is not correct.

7. DIMMER button: You can switch the display off or adjust the brightness of the display in

three steps.

8. INPUT button: Switches the input to be played. (BD/DVD / CBL/SAT / GAME /

STRM BOX / DIGITAL IN / ANALOG IN / TV / FM / NET / USB / BT AUDIO)

 

  

Part Names

SN29402599_FS-W40_En_1606XX.book 3 ページ２０１７年３月２９日　水曜日　午後９時３１分

4

> Before Start >Part Names > Install > Setup > Playback

Supplementary information | Firmware Update | Others

E

N

Rear Panel

1. ANTENNA FM 75 jack: Connect the supplied antenna.

2. ANALOG IN jacks: Input audio signals from a TV, for example, with an analog audio

cable.

3. DIGITAL IN OPTICAL jack: Input digital audio signals from a TV, for example, with a digital

optical cable.

4. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH enabled

device. The diagram shows the movable range for the wireless antenna. Do not try to

force it beyond this range otherwise you may break it.

5. Power cord

6. USB port: A USB storage device is connected so that music files stored in it can be

played. You can also supply power (maximum 5V/1A) to USB devices with a USB cable.

7. NETWORK port: Connect to the network with an Ethernet cable.

8. HDMI OUT jack: Connect a HDMI cable to transfer video signals and audio signals to a

TV.

9. HDMI IN jacks: Input video signals and audio signals with a HDMI cable connected to an

AV component.



 















180°

90°

SN29402599_FS-W40_En_1606XX.book 4 ページ２０１７年３月２９日　水曜日　午後９時３１分

> Before Start >Part Names > Install > Setup > Playback

Supplementary information | Firmware Update | Others

5

E

N

Remote Controller

1. Í button: Turns the unit on or into standby mode.

2. Input selector buttons: Switches the input to be played.

3. (AV ADJUST) button: You can perform common settings on the TV screen. (P23)

4. Cursors, ENTER button: Select the item with the cursors and press ENTER to confirm.

5. (SETUP) button: Displays the System Setup screen.

(



P14)

6. Volume buttons: Allows you to adjust the volume. This button also cancels the muting.

7. button: Temporarily mutes audio. Press again to cancel muting.

8. LISTENING MODE buttons: Allows you to select the listening mode. (P35)

9. Play buttons: You can start play of the Music Server or USB.

10.

button: You can start repeat or random play of the Music Server or USB.

CLEAR button: Deletes all characters you have entered when entering text on the TV

screen.

11.

(STATUS) button: Switches the information on the display.

12.

button: Returns the display to the previous state during setting.

13.

MODE button: Switches tuning to an FM station between automatic tuning and manual

tuning.

14.

+Fav button: Used to register FM radio stations.





























30°

Approx.5 m (16 ft.)

SN29402599_FS-W40_En_1606XX.book 5 ページ２０１７年３月２９日　水曜日　午後９時３１分

6

> Before Start >Part Names > Install > Setup > Playback

Supplementary information | Firmware Update | Others

E

N

Display

1. Lights in the following conditions.

HDMI: HDMI signals are input and selected.

ARC: Audio signals from the ARC compatible TV are input and selected.

USB: When "USB" is selected with the input selector and the unit is connected by USB

and the USB device is selected. Flashes if the USB is not properly connected.

NET: When "NET" is selected with the input selector and the unit is connected to the

network. It will flash if the connection to the network is not correct.

DIGITAL: Digital signals are input and the digital input selector is selected.

2. Lights when operating the "NET" or "USB" input selector indicating remote controller

cursor operations are possible in screens showing list of tracks, for example.

3. Lights when operating the "NET" or "USB" input selector when tracks are played or

paused.

4. Lights according to the type of input digital audio signals and the listening mode.

5. Lights in the following conditions.

RDS: Receiving RDS broadcasting.

AUTO: When tuning mode is auto.

TUNED: Receiving FM radio.

FM STEREO: Receiving FM stereo.

SLEEP: Sleep timer has been set.

ASb: When Auto Standby function is enabled.

6. Flashes when muting is on.

7. Displays various information of the input signals. Characters that cannot be displayed on

this unit are replaced with asterisks ( ).

AAC

Neo:6





 

SN29402599_FS-W40_En_1606XX.book 6 ページ２０１７年３月２９日　水曜日　午後９時３１分

> Before Start >Part Names > Install > Setup > Playback

Supplementary information | Firmware Update | Others

7

E

N

Wireless Satellite Speakers

1. Speaker grill

2. CONNECT LED: This flashes red when unpaired with the sound system controller and

lights blue when pairing is complete. Also, when "Wireless Speaker Standby" has been

set to "On" on the sound system controller, this lights red when the sound system

controller is in standby mode.

3. Locations to attach fittings to hang from the wall: Use commercially available fittings to

attach to a wall or hang from the ceiling. Make sure the fittings you choose are capable of

sufficiently sustaining the weight of the Speaker. Refer to the instruction manual for the

fittings for information about installation.

4. AC IN: Connect the supplied power cord.

CONNECT









60 mm



M5 (Depth 12 mm)

SN29402599_FS-W40_En_1606XX.book 7 ページ２０１７年３月２９日　水曜日　午後９時３１分

8

> Before Start > Part Names >Install > Setup > Playback

Supplementary information | Firmware Update | Others

E

N

1. Install the Wireless Satellite Speakers

1 2

First install the speakers and connect their power cords. On

the rear of the speakers you will see "L" or "R" on the label.

Place the speaker with "L" at the left of the listening position.

Place the speaker with "R" to the right of the listening position.

The sound system controller and the speakers are connected

wirelessly. Setup inside within a maximum 9 m (30 ft.) square.

The optimum is to put the speakers at ear height, at an even

distance from the listening position.

When also installing the wireless subwoofer and wireless

satellite speakers (sold separately), make sure you put

them in place and connect their power cords. Refer to the

instruction manuals for the other equipment for the location

and power connections for them.

1: The optimum is between 22 e and 30 e.

1

Install

SN29402599_FS-W40_En_1606XX.book 8 ページ２０１７年３月２９日　水曜日　午後９時３１分

9

> Before Start > Part Names >Install > Setup > Playback

Supplementary information | Firmware Update | Others

E

N

2. Connect the TV

a HDMI cable, b Digital optical cable

a

b

DIGITAL

OPTICAL OUT

1

To ARC TV

For a TV that supports the ARC (Audio Return Channel)

feature, use an HDMI cable and connect according to

illustration "a". Choose an HDMI IN jack on the TV that

supports ARC when connecting.

To Non-ARC TV

For a TV that does not support the ARC (Audio Return

Channel) feature, connect both the HDMI cable in illustration

"a" and the digital optical cable in "b". If the TV doesn't have

a DIGITAL OPTICAL OUT jack, use an analog audio cable

and connect the TV's ANALOG AUDIO OUT jack to the

AUDIO IN jack on the sound system controller.

Connection with a digital optical cable or analog audio cable

is not necessary if you will watch TV through a device such

as a cable set-top box (that is, not use a tuner built into the

TV) that you have connected to the HDMI IN jack on the

sound system controller.

Setup

0 Settings are required to use the ARC function. Make

settings after all connections are complete. Settings are

made in the System Setup (P14) menu displayed by

pressing on the remote controller. The ARC function is

enabled by setting "Hardware" - "HDMI CEC" (P17) in

the System Setup menu to "On".

0 Please refer to the TV’s operation manual for directions

on connections and setup for the TV.

SN29402599_FS-W40_En_1606XX.book 9 ページ２０１７年３月２９日　水曜日　午後９時３１分

10

> Before Start > Part Names >Install > Setup > Playback

Supplementary information | Firmware Update | Others

E

N

3. Connect the AV Components

a HDMI cable

Use HDMI cables to connect AV components. With

connection to an AV component that conforms with the CEC

(Consumer Electronics Control) standard, you can use

features such as the HDMI CEC feature that links with the

input selector, and the HDMI Standby Through feature

which allows you to play video and audio from AV

components on the TV even when this unit is in standby

mode. (P58)

0 To play 4K or 1080p video, use the high speed HDMI

cable.

Setup

0 Settings are required to use the HDMI CEC and HDMI

Standby Through features. Make settings after all

connections are complete. Settings are made in the

System Setup (P14) menu displayed by pressing

on the remote controller. In the System Setup menu,

enable both "Hardware" - "HDMI CEC" (P17) and

"HDMI Standby Through" (P18).

0 To enjoy digital surround sound including Dolby Digital,

audio output should be set to "Bitstream output" on the

connected Blu-ray Disc player or other device.

e.g. BD

a

1

HDMI OUT

GAMEBD/DVD

Cable/Satellite

set-top box

Streaming

media player

SN29402599_FS-W40_En_1606XX.book 10 ページ２０１７年３月２９日　水曜日　午後９時３１分

11

> Before Start > Part Names >Install > Setup > Playback

Supplementary information | Firmware Update | Others

E

N

4. Connect Other Cables

a FM indoor antenna, b Ethernet cable, c Power cord

1 2

3

b

cc

a

Antenna Hookup

Connect the supplied FM indoor antenna to the ANTENNA

FM 75 terminal. Move the FM indoor antenna around

while playing the radio to find the position with the best

reception.

Network Hookup

You can enjoy network features such as internet radio by

connecting the unit to the network via a LAN or Wi-Fi

(wireless LAN). If you connect by wired LAN, connect the

router with an Ethernet cable to the NETWORK port. To

connect by Wi-Fi, follow the on-screen instructions in Initial

Setup (P13).

Power Cord Hookup

Connect the power cord of the sound system controller only

after all other connections are completed.

SN29402599_FS-W40_En_1606XX.book 11 ページ２０１７年３月２９日　水曜日　午後９時３１分

12

> Before Start > Part Names > Install >Setup > Playback

Supplementary information | Firmware Update | Others

E

N

Initial Setup with Auto Start-up Wizard

1 2

3 4

Initial Setup starts automatically

1. Switch the input on the TV to that assigned to the unit.

2. Put batteries into the remote controller of this unit.

3. Press Í on the remote controller. When power is turn on

for the first time, an Initial Setup screen is automatically

displayed on the TV to allow you to make settings

required for start up.

4. Follow the on-screen instructions to select the item with

the cursors of the remote controller and press ENTER to

confirm your selection.

0 To return to the previous screen, press .

To redo Initial Setup: If you terminate the procedure on the

way or want to change a setting made during Initial Setup,

press on the remote controller, select "Miscellaneous" -

"Initial Setup", in the System Setup screen and press

ENTER. To select the language displayed again, change

"OSD Language". (P14)

Initial Setup

Language Select

English

Deutsch

Français

Español

Italiano

Nederlands

Svenska

Русский язык

Setup

SN29402599_FS-W40_En_1606XX.book 12 ページ２０１７年３月２９日　水曜日　午後９時３１分

13

> Before Start > Part Names > Install >Setup > Playback

Supplementary information | Firmware Update | Others

E

N

1. Registration of wireless Speakers

Pair the speakers and sound system controller. It takes

about 30 seconds to detect the speakers. When all the

speakers you will use have been detected, select "Save" to

save the pairing information.

If there are speakers that cannot be detected, make sure

that the speaker's power cord is properly plugged into the

wall outlet, then select "Retry".

2. Easy Setup

Adjust the audio output of the speakers. By just selecting

the positions of speakers as you see them from the listening

position, you can automatically and easily set the output

levels, etc., for each of the speakers.

0 You can also make more advanced settings for output

levels and distances from the listening position for each

of the speakers. (P15)

3. Network Connection

Set up Wi-Fi connection with an access point such as a

wireless LAN router. There are the following two methods of

connecting by Wi-Fi:

"Enter Password": Enter the password (or key) of the

access point to connect.

"Push Button": If the access point has an automatic

connection button, you can connect without entering a

password.

0 If the SSID of the access point is not displayed, then in

the screen listing the SSIDs, select "Other..." with the

button on the remote controller and press ENTER, then

follow the on-screen instructions.

Keyboard input: To switch between upper and lower case,

select "A/a" on the screen and press ENTER. To select

whether to mask the password with " " or display it in plain

text, press +Fav on the remote controller. Pressing CLEAR

will delete all the input characters.

Privacy policy: A confirmation screen asking you to agree

to the privacy policy is displayed during network setting.

Select "Yes" and press ENTER to indicate agreement.

Scan

The follwoing speakers were detected.

Front Left : Yes

Front Right : Yes

Surround Left : No

Surround Right : No

Subwoofer : No

Ensure all speakers are connected to the power supply.

Save

Retry

Easy Setup

Which speaker is closest to your listening

position?

Front Left or Front Right?

Same Distance

Front Left

Front Right

Wi-Fi Setup

When finished, select the "OK" key.

Ɵơ

OKA/a

abcdef gh i j k l m

nopqr s t uvwxy z

1234567890- ^ \

,./;:@[] ̺

A/aAll Erase Hide/Show

+Fav

Password

SN29402599_FS-W40_En_1606XX.book 13 ページ２０１７年３月２９日　水曜日　午後９時３１分

14

> Before Start > Part Names > Install >Setup > Playback

Supplementary information | Firmware Update | Others

E

N

System Setup

The unit allows you to configure advanced settings to provide you with an even better

experience.

1. Switch the input on the TV to that assigned to the unit.

2. Press on the remote controller.

3. After the System Setup screen is displayed, select the content with  /  /  /  on the

remote controller and press ENTER to confirm your selection.

0 Change the initial values for each of the settings with the cursors  / .

0 To return to the previous screen, press .

4. To exit the settings, press .

TV Out

TV Out / OSD

1 2

System Setup

TV Out

Wireless Speaker

Hardware

1080p -> 4K Upscaling When using a TV that supports 4K, video signals input at 1080p

can be automatically upscaled to 4K for output.

"Off (Default Value)": When not using this function

"Auto": Use this function

0 Select "Off" if your TV does not support 4K.

Super Resolution When you have set "1080p -> 4K Upscaling" to "Auto", you can

select the degree of video signal correction from "Off" and

between "1" (weak) and "3" (strong).

OSD Language Select the on-screen display language.

English, German, French, Spanish, Italian, Dutch, Swedish,

Russian, Chinese

Impose OSD Set whether or not to display the information on the TV when the

volume is adjusted or input is changed, for example.

"On (Default Value)": OSD displayed on the TV

"Off": OSD not displayed on the TV

0 OSD may not be displayed depending on the input signal

even if "On" is selected. If the operation screen is not

displayed, change the resolution of the connected device.

Screen Saver Set the time to start the screen saver.

Select a value from "3 minutes (Default Value)", "5 minutes", "10

minutes" and "Off".

SN29402599_FS-W40_En_1606XX.book 14 ページ２０１７年３月２９日　水曜日　午後９時３１分

15

> Before Start > Part Names > Install >Setup > Playback

Supplementary information | Firmware Update | Others

E

N

Wireless Speaker

This setting cannot be selected if audio is being output from the speakers of the TV.

Setup Mode

Easy Setup

You can easily set the distance and volume level for each of the speakers. To make more

detailed settings, set "Setup Mode" to "Standard", then set the distance and volume level for

each speaker individually.

Distance

This can only be selected when the "Setup Mode" is "Standard".

0 Distance units can be switched by pressing MODE on the remote controller. When the

unit is set as meters, you can set between 0.03 m and 9.00 m in increments of 0.03 m.

When the unit is set as feet, you can set between 0.1 ft and 30.0 ft in increments of 0.1ft.

Channel Level

This can only be selected when the "Setup Mode" is "Standard".

Scan

Use this to rescan for speakers when wireless satellite speakers and wireless subwoofer

(sold separately) are added to the system. When performing this operation, first switch the

power of the sound system controller to standby, then connect the power cords of all the

speakers, then proceed.

Setup Mode Select how to setup the audio output of the speakers.

"Easy (Default Value)": To use "Easy Setup" for a simplified

setup

"Standard": When you want to set the Distance and Channel

Level for each speaker individually

Front Left Specify the distance between each speaker and the listening

position. (Default Value is 3.00m (10.0ft))

Front Right Specify the distance between each speaker and the listening

position. (Default Value is 3.00m (10.0ft))

Surround Right Specify the distance between each speaker and the listening

position. (Default Value is 3.00m (10.0ft))

Surround Left Specify the distance between each speaker and the listening

position. (Default Value is 3.00m (10.0ft))

Subwoofer Specify the distance between each speaker and the listening

position. (Default Value is 3.00m (10.0ft))

Front Left Select a value between "–12 dB" and "+12 dB" (in 1 dB

increments). A test tone will be output each time you change the

value. Select the desired level. (Default Value is 0 dB)

Front Right Select a value between "

–12 dB" and "+12 dB" (in 1 dB

increments). A test tone will be output each time you change the

value. Select the desired level. (Default Value is 0 dB)

Surround Right Select a value between "

–12 dB" and "+12 dB" (in 1 dB

increments). A test tone will be output each time you change the

value. Select the desired level. (Default Value is 0 dB)

Surround Left Select a value between "

–12 dB" and "+12 dB" (in 1 dB

increments). A test tone will be output each time you change the

value. Select the desired level. (Default Value is 0 dB)

Subwoofer Select a value between "

–15 dB" and "+12 dB" (in 1 dB

increments). A test tone will be output each time you change the

value. Select the desired level. (Default Value is 0 dB)

SN29402599_FS-W40_En_1606XX.book 15 ページ２０１７年３月２９日　水曜日　午後９時３１分

16

> Before Start > Part Names > Install >Setup > Playback

Supplementary information | Firmware Update | Others

E

N

Information

Subwoofer

Audio Adjust

Dual Mono / Mono

Dolby

Volume

Transmission Status This indicates the communication status of the sound system

controller.

Front Left The connection status of the front left speaker is displayed.

"---": Not paired

"Connected": Successfully connected

Front Right The connection status of the front right speaker is displayed.

"---": Not paired

"Connected": Successfully connected

Surround Left The connection status of the surround left speaker is displayed.

"---": Not paired

"Connected": Successfully connected

Surround Right The connection status of the surround right speaker is displayed.

"---": Not paired

"Connected": Successfully connected

Subwoofer The connection status of the subwoofer is displayed.

"---": Not paired

"Connected": Successfully connected

Subwoofer Set whether a subwoofer is connected or not.

"Yes (Default Value)": When using a subwoofer

"No": When not using a subwoofer

Dual Mono Set the audio channel or language to be output when playing

multiplex audio or multilingual TV broadcasts etc.

"Main (Default Value)": Main channel only

"Sub": Sub channel only

"Main / Sub": Main and sub channels will be output at the same

time.

0 If multiplex audio is being played, "1+1" will be displayed on

the display of the sound system controller when on the

remote controller is pressed.

Mono Input Channel Set the input channel to use for playing any 2 ch digital source

such as Dolby Digital, or 2 ch analog/PCM source in the Mono

listening mode.

"Left": Left channel only

"Right": Right channel only

"Left + Right (Default Value)": Left and right channels

Loudness

Management

When playing Dolby TrueHD, enable the dialog normalization

function which keeps the volume of dialog at a certain level. Note

that when this setting is Off, the DRC function that allows you to

enjoy surround at low volumes is fixed to off when playing Dolby

Digital Plus/Dolby TrueHD.

"On (Default Value)": Use this function

"Off": Do not use this function

Volume Limit Set the maximum value to avoid too high volume. Select "Off

(Default Value)" or a value between "30" and "49".

SN29402599_FS-W40_En_1606XX.book 16 ページ２０１７年３月２９日　水曜日　午後９時３１分

17

> Before Start > Part Names > Install >Setup > Playback

Supplementary information | Firmware Update | Others

E

N

Source

Input Volume Absorber

Adjust the volume level difference between the devices connected to the unit. Select the

input selector to configure.

Fixed PCM

0 The setting cannot be changed when "NET", " ", "USB", "TUNER", or "ANALOG IN"

input is selected.

Hardware

HDMI

Input Volume Absorber Select a value between "–12 dB" and "+12 dB". Set a negative

value if the volume of the target device is larger than the others

and a positive value if smaller. To check the audio, start playback

of the connected device. (Default Value is 0 dB)

Fixed PCM Select whether to fix digital audio input signals to PCM (except

multi-channel PCM). Set this item to "On" if noise is produced or

truncation occurs at the beginning of a track when playing PCM

sources. Select "Off" normally. (Default Value is Off)

HDMI CEC Setting to "On" enables the input selection link and other link

functions with HDMI connected CEC compliant device.

"On": Use this function

"Off (Default Value)": Do not use this function

When changing this setting, turn off and then on again the power

of all connected components.

0 Depending on the TV set, a link may need to be configured on

the TV.

0 Setting to "On" and closing the on-screen menu displays the

name of the CEC-compatible components and "CEC On" on

the display of the sound system controller.

0 Power consumption in standby mode may increase if "On" is

set. (Depending on the TV status, the unit will enter the

normal standby mode.)

0 If you operate the VOLUME buttons on the unit when this

setting is "On" and audio is output from the TV speakers,

audio will be output also from the speakers connected to the

unit. If you want to output from only either of them, change the

unit or TV settings, or reduce the volume of the unit.

0 If abnormal operation occurs when you set the setting to "On",

set it to "Off".

0 When connecting a non-CEC compatible component, or when

you are not sure whether it is compatible, set the setting to

"Off".

SN29402599_FS-W40_En_1606XX.book 17 ページ２０１７年３月２９日　水曜日　午後９時３１分

18

> Before Start > Part Names > Install >Setup > Playback

Supplementary information | Firmware Update | Others

E

N

HDMI Standby

Through

When this is set to anything other than "Off", you can play the

video and audio of an HDMI connected player on the TV even if

the unit is in standby mode. Only "Auto" and "Auto (Eco)" can be

selected if "HDMI CEC" is set to "On". If you select anything

else, set "HDMI CEC" to "Off". (Default Value is Off)

0 Setting to anything other than "Off" increases the power

consumption even when the unit is on standby. However, the

increase in power consumption is kept to a minimum by

automatically entering the HYBRID STANDBY mode, where

only the essential circuit is operating.

"BD/DVD", "CBL/SAT", "GAME", "STRM BOX": For example, if

you select "BD/DVD", you can play the equipment connected to

the "BD/DVD" jack on the TV even if the unit is in standby mode.

Select this setting if you have decided which player to use with

this function.

"Last": You can play the video and audio of the input selected

immediately prior to the unit being switched to standby on the

TV. When "Last" is selected, you can switch the input of the unit

with the remote controller even in the standby mode.

"Auto", "Auto (Eco)": Select one of these settings when you have

connected equipment that conforms to the CEC standard. You

can play the video and audio of the input selected on the TV,

irrespective of what input was selected immediately prior to the

unit being switched to standby, using the CEC link function.

0 To play players on the TV that do not conform to the CEC

standard, you will need to turn the unit on and switch to the

relevant input.

0 When using TV that complies with the CEC standard, you can

reduce the power consumption in standby mode by selecting

"Auto (Eco)".

Audio TV Out You can enjoy audio through the speakers of the TV while this

unit is on.

"On": Use this function

"Off (Default Value)": Do not use this function

0 The setting is fixed to "Auto" if "HDMI CEC" is set to "On". If

you change this setting, set "HDMI CEC" to "Off."

0 Listening mode cannot be changed while "Audio TV Out" is

set to "On" and audio is being output through the speakers of

the TV.

0 Depending on your TV set or input signal of the component,

audio may not output through the speakers of the TV even if

this setting is set to "On". In such case, audio is output from

the speakers of the unit.

0 If you operate the VOLUME buttons on this unit when audio

that is being input through this unit for output from the TV

speakers, audio is output from this unit. If you do not want to

output audio from the unit, change the unit or TV settings, or

reduce the volume of the unit.

Audio Return Channel You can enjoy sound of the HDMI connected ARC compatible

TV through the speakers connected to the unit.

To use this function, set "HDMI CEC" to "On" in advance.

"Auto": When enjoying the TV sound through the speakers

connected to the unit

"Off": When not using the ARC function

Auto Delay This setting automatically corrects any desynchronization

between the video and audio signals based on data from the

HDMI LipSync compatible TV.

"On (Default Value)": Automatic correction will be enabled.

"Off": Automatic correction will be disabled.

SN29402599_FS-W40_En_1606XX.book 18 ページ２０１７年３月２９日　水曜日　午後９時３１分

19

> Before Start > Part Names > Install >Setup > Playback

Supplementary information | Firmware Update | Others

E

N

Network

0 When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the setting

automatically. To assign fixed IP addresses to each component, you must set "DHCP" to

"Disable" and assign an address to this unit in "IP Address" as well as set information

related to your LAN, such as Subnet Mask and Gateway.

0 Wait for a while if "Network" cannot be selected. It will appear when the network feature is

started.

Wi-Fi Connect the unit to network via wireless LAN router.

"On": Wireless LAN connection

"Off(Wired) (Default Value)": Wired LAN connection

Wi-Fi Setup You can configure wireless LAN settings by pressing ENTER

when "Start" is displayed.

Wi-Fi Status The information of the connected access point will be displayed.

"SSID": SSID of the connected access point.

"Signal": Signal strength of the connected access point.

"Status": Status of the connected access point.

MAC Address This is the MAC address of this unit.

This value is specific to the component and cannot be changed.

DHCP "Enable (Default Value)": Auto configuration by DHCP

"Disable": Manual configuration without DHCP

If selecting "Disable", you must set "IP Address", "Subnet Mask",

"Gateway", and "DNS Server" manually.

IP Address Displays/Sets the IP address.

Subnet Mask Displays/Sets the subnet mask.

Gateway Displays/Sets the gateway.

DNS Server Displays/Sets the primary DNS server.

Proxy URL Displays/Sets the proxy server URL.

Proxy Port Displays/Sets the proxy server port number when you enter

"Proxy URL".

Friendly Name Change the device name for this unit which is shown on other

devices connected to the network to an easily recognized name.

This is set to Pioneer AC-400 at the time of

purchase. (" " stand for alphanumeric characters identifying

each unit)

1. Press ENTER to display the Edit screen.

2. Select a character or symbol with the cursors and press

ENTER.

Repeat it to input 31 or less characters.

"A/a": Switches between upper and lower cases. (Pressing

MODE on the remote controller also toggles between upper

and lower cases.)

" " " ": Moves the cursor to the arrow direction.

" ": Removes a character on the left of the cursor.

" ": Enters a space.

0 Pressing CLEAR on the remote controller will remove all the

input characters.

3. After inputting, select "OK" with the cursors and press

ENTER.

The input name will be saved.

Usage Data As a means of improving the quality of our products and

services, our company may collect information about your usage

over the network. Select "Yes" if you agree to our collecting this

information. Select "No" if you do not want us to collect this

information. (Default Value is No)

You can set this after confirming the Privacy Policy. When you

select "Usage Data" and press ENTER, the Privacy Policy is

displayed. (The same screen is displayed once also when

setting up the network connection.) If you agree to the collection

of the information, this setting also becomes "Yes". Note that if

you agree to the Privacy Policy but select "No" for this setting,

the information will not be collected.

Network Check You can check the network connection.

Press ENTER when "Start" is displayed.

SN29402599_FS-W40_En_1606XX.book 19 ページ２０１７年３月２９日　水曜日　午後９時３１分

La page est en cours de chargement...

Pioneer FS-W40 Manuel utilisateur

Pioneer FS-W40 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents