USB-C
CHARGING
PORT
INTERNAL RECHARGEABLE LITHIUM-ION BATTERY
This device uses an internal non-replaceable rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery
may be dead, try charging it for an extended period of time and try resetting the unit.
WARNING/DISPOSAL OF UNIT
Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device. To dispose of the unit,
follow the instructions below:
• Never dispose of used batteries/electronics with ordinary solid wastes, since they may contain toxic substances.
• Always dispose of used batteries/electronics in accordance with the prevailing community regulations.
• Many electronics retailers now recycle batteries and other electronic components at no charge. To find a drop-o location near you, visit
www.call2recycle.com
GENERAL BATTERY PRECAUTIONS
• Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
• Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substances.
• Avoid charging a rechargeable battery when the temperature is not within 5°C - 35° C (41° - 95° Fahrenheit).
• Never expose a battery to any liquid.
• Never expose a battery to excessive heat such as direct sunlight or fire. Never use a battery pack in an unventilated vehicle where excessive internal
temperatures may be encountered.
• Always keep batteries out of the reach of infants and small children.
IMPORTANT SAFETY INSTRUCTIONS
Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.
1. Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the
unit.
2. Do not block any ventilation openings.
3. Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers)
that produce heat.
4. Only use attachments/accessories specified by the manufacturer.
5. Unplug this product during lightning storms or when unused for long periods of time.
6. Damage Requiring Service – This product should be serviced by qualified service personnel when:
- Plug has been damaged.
- Objects have fallen into or liquid has been spilled into the enclosure.
- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
- The unit exhibits a marked change in performance or does not operate normally.
7. No naked flame sources, such as lighted candles, should be placed on this product.
8. Attention should be drawn to the environmental aspects of battery disposal.
9. This product is suitable for use in tropical and/or moderate climates.
10. Never leave the device unattended when charging. Always charge lithium devices on a non-flammable surface - wooden tables, carpeted floors
and bedding are not recommended charging surfaces.
WARNING:
- Do not dispose of batteries in the household trash or fire.
- The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable.
- If the unit is to be unused for an extended period of time, such as a month or longer, charge the unit fully before storage.
- Always use a UL/ETL certified charging adapter (not included), and the supplied USB charging cable.
FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
ISED Information
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et
la conformité.
Tout changement ou modification non expressément approuvé par la partie responsable de la conformité peut annuler l'autorité de l'utilisateur à
utiliser l'équipement.
CAN ICES-3(B) / NMB-3(B)
iBT550_IS-071123-A Printed in China
© 2023 SDI Technologies, Inc.
All rights reserved
For questions, full instructions, warranty, and additional
safety information, please scan the QR code or visit:
www.ihome.com/help/ibt550
PLAYTOUGH MINI
Waterproof Portable Speaker
iBT550 - Instruction Sheet - English
Color: Black text on white paper (1C + 1C)
Size: 102 W x 150 H mm
Material: 85gsm wood free paper
July 11 2023 v4
* Back* Front
Use the extended tip of a
paper clip or other thin tool
to push in the reset button
RESET BUTTON
CHARGING THE SPEAKER
USB AC
adaptor
(not included)
USB-C charging
cable (included)
CHARGE UNIT
BEFORE USE
ABOUT 4 HOURS
LED STATUS INDICATORS
pairing (flashing)
connected to Bluetooth
BLUE
BLUE
BLUETOOTH STATUS
charging (left side)
fully charged (left side)
low battery (fast flash)
(right side)
RED
OFF
RED
BATTERY STATUS
TRUE WIRELESS PAIRING (TWS)
(REQUIRES 2 SPEAKERS)
1) Pair one iBT550 unit to your device via Bluetooth.
2) Power on the second iBT550 unit.
3) Press and hold the Play Button for 5 seconds on each
unit (unit would have a prompt tone).
4) When both units are linked, will announce ‘Left Channel’,
‘Right Channel’ respectively.
5) Both units will link TWS automatically next time both
units are powered on within 20 sec.
6) To remove TrueWireless pairing, press & hold Bluetooth
Pairing button for 10 seconds.
SPLASHPROOF COVER
Before using near water, make sure the splashproof cover is
completely flush with the unit. Press along the entire edge
of the cover until it is securely in place.
Blue LED = Bluetooth Status
Red LED = Battery Status
Green LED = TWS Status
BLUETOOTH PAIRING
- Press & Hold until the LED
flashes blue to enter
pairing mode
- Select ‘iHome iBT550’
on your device to connect
Press and hold 10s to clear Bluetooth
POWER
ON/OFF
- Press to turn ON/OFF
- Press & Hold to check
battery status (when
unit is ON)
BACK
Battery Charing LED BT: Blue LED
Battery Low: Red LED flash
TWS: Green LED
PLAY/PAUSE/
SPEAKERPHONE
VOLUME
UP
VOLUME
DOWN FRONT
- Press to Play/Pause
- Short press to answer or end a
call/ Press & hold to reject call.
Note: Using the
control on your
devics to navigate
tracks.
Model: iBT550
-
1
dans d''autres langues
- English: iHome iBT550 User guide
Documents connexes
Autres documents
-
HeadRush HRB 5029 True Wireless In-Ear Earbuds Manuel utilisateur
-
JVC SP-SQ4BT Manuel utilisateur
-
EDIFIER TWS200 Pro Mode d'emploi
-
EDIFIER TWSNB5 True Wireless Earbuds Mode d'emploi
-
PORSCHE DESIGN PDT40 Mode d'emploi
-
HeadRush HRB 5028 True Wireless Bluetooth® In-Ear Earbuds Le manuel du propriétaire
-
HeadRush HRB 5037 Manuel utilisateur
-
eKids WH-115 Manuel utilisateur
