Haier QPCA10 Le manuel du propriétaire
- Catégorie
- Climatiseurs mobiles
- Taper
- Le manuel du propriétaire
49-5000614 Rev. 2 10-22 GEA
Owner’s Manual and
Installation Instruction
Manuel d’utilisation et
instructions d’installation
Manual del propietario y
instrucciones de instalación
QPCA10
QPCA11
Design may vary by model number. La conception peut varier
en fonction du numéro de
modèle
El diseño puede variar según
el número de modelo
Portable Air Conditioner
Climatiseurs portables
Accondicionadores De Aire Para Sala
249-5000614 Rev. 2
ENGLISH
49-5000614 Rev. 2 3
ENGLISH
TABLE OF CONTENTS
RECORD KEEPING
Thank you for purchasing this Haier product. This user manual
will help you get the best performance from your new air
conditioner.
Para referencia futura, registre el modelo y el número de serie
ubicados en el deshumidificador y la fecha de compra.
Staple your proof of purchase to this manual to aid in
obtaining warranty service if needed.
____________________________________________________
Model number
____________________________________________________
Serial number
____________________________________________________
Date of purchase
HAIER WEBSITE
Have a question or need assistance with your appliance? Try the Haier Website 24 hours a day, any day of the year! You
can also shop for more great Haier products and take advantage of all our on-line support services designed for your
convenience. In the US: Haierappliances.com
IMPORTANT SAFETY INFORMATION .............................................................................. 4
CONTROLS .......................................................................................................5
CARE AND CLEANING ............................................................................................ 8
INSTALLATION INSTRUCTIONS ................................................................................. 10
TROUBLESHOOTING ........................................................................................... 14
WIFI SETUP ..................................................................................................... 15
LIMITED WARRANTY .............................................................................................16
449-5000614 Rev. 2
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
WARNING To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the air conditioner,
follow basic precautions, including the following:
• Read all of the instructions before using this appliance.
• Plug into a grounded 3 prong outlet.
• Do not remove ground prong.
• Do not use an adapter.
• Do not use an extension cord.
• Do not operate the air conditioner if it has a damaged
cord or plug, if it is not working properly, or if it has been
damaged or dropped.
• Haier does not support any servicing of the air conditioner.
Refer to warranty information for refund or exchange
options.
• Service of all other components may ONLY be completed
by a qualified technician.
• Disconnect power before servicing or cleaning.
NOTE: Turning off power by pressing the Power button does
NOT disconnect the appliance from the power supply.
• Do not install or use the air conditioner in any area where
the atmosphere contains combustible gases or where the
atmosphere is contaminated. Avoid any chemicals coming
in contact with your air conditioner.
• Do not store anything directly on top of the air conditioner.
• Use two or more people to move and install air conditioner.
• Never operate the air conditioner without the filters in
place.
• Do not use the air conditioner near a bathtub, shower or
wash basin or other wet area.
READ AND SAVE THESE INSTRUCTIONS
SAFETY INFORMATION
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
• Do not use means to accelerate the defrosting process
or to clean, other than those recommended by the
manufacturer.
• The appliance shall be stored in a room without
continuously operating ignition sources (for example:
open flames, an operating gas appliance or an operating
electric heater.
• Do not pierce or burn refrigerant tubing. Be aware that
refrigerants may not contain an odor.
• Keep ventilation openings clear of obstruction.
• When handling, installing, and operating the appliance, care
should be taken to avoid damage to the refrigerant tubing.
• Do not drill holes in the unit.
• Maintenance, cleaning, and service should only be
performed by technicians properly trained and qualified in
the use of flammable refrigerants.
• GE Appliances does not support any servicing of the air
conditioner.
• Dispose of air conditioner in accordance with Federal and
Local Regulations. Flammable refrigerants require special
disposal procedures. Contact your local authorities for the
environmentally safe disposal of your air conditioner.
WARNING
Risk of Fire or Explosion. This unit contains flammable refrigerant.
Additional safety precautions must be followed.
WARNING
How to Insert the Batteries in the Remote Control
• Remove the battery cover by sliding it according to the
arrow direction.
• Insert new batteries, making sure that the (+) and (-) of
battery are installed correctly.
• Reattach the cover by sliding it back into position.
NOTES:
• Use 2 “AAA” (1.5 volt) alkaline batteries. Do not use
rechargeable batteries
• Remove the batteries from the remote control if the
system is not going to be used for a long time.
•
Do not mix old and new batteries. Do not mix alkaline,
standard (carbon-zinc) or rechargeable (ni-cad, ni-mh,
etc) batteries.
WARNING
Caution for Ingestion. The battery may cause suffocation if swallowed by children.
49-5000614 Rev. 2 5
ENGLISH
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
A. Control Panel Display
Displays the Set Temperature in degrees Fahrenheit
or degrees Celsius. The corresponding indicator light
will illuminate.
B. Power Button
Turns ON/OFF power to the air conditioner.
NOTE: Turning off power by pressing the Power button
does NOT disconnect the appliance from the power
supply.
• Press the Power button. The Power indicator will
illuminate.
C. Mode Button
Press the Mode button to toggle among the operating
options. The corresponding indicator will illuminate:
Heat (on some models) - Heats the room to the set
temperature
Cool – Cools the room to the set temperature
DRY – Reduces the humidity in the room
Fan – Circulates the air in the room without cooling
D. Timer / Temperature Set Controls
Adjusts the Temperature or Hours in Time Delay.
To Set the Temperature:
The temperature can be set between 64ºF and 86ºF (17ºC
and 30º C) when the air conditioner is in Cool mode.
1. Press the Mode button until the Cool mode is selected.
2. Press the Up Arrow or Down Arrow buttons to select the
Temperature.
NOTE: The temperature cannot be set when the air
conditioner is in either Fan or DRY mode.
E. Fan Speed Button
The fan speed can be adjusted from Low, Medium, to High
speed when the air conditioner is in operation.
NOTE: The fan speed cannot be adjusted when the unit is
in DRY mode.
• Press the Fan Speed button to toggle among the three
speeds. The corresponding fan speed indicator will
illuminate.
1. Continuous Fan Mode
To activate continuous fan mode, press and hold Fan
Speed button for 3 seconds and release. “CF” will
show on display for continuous fan mode. When set
temperature is achieved, indoor fan will continue to run.
F. Timer Button
Program a time from (1-hour to 24-hours) for the air
conditioner to turn Off or On. When a Time Delay is
programmed, the Timer indicator light will illuminate.
While the air conditioner is operating:
1. Press the Timer button.
2. Press the Up/Down arrow buttons to select the number of
hours you want the air conditioner to continue to operate
before turning Off.
NOTE: Wait approximately 5 seconds for the Turn-Off time
to be saved.
While the air conditioner is off:
1. Press the Timer button.
2. Press the Up/Down arrow buttons to select the number
of hours you want the air conditioner to remain off before
turning On.
NOTE: Wait approximately 5 seconds for the Turn-On time
to be saved.
To cancel the timer:
• Press the Timer button once, the hours remaining will
flash, press the timer button again and the timer will be
canceled.
CONTROLS
A
BC EF
D
649-5000614 Rev. 2
ENGLISH
Cool Mode
Use the COOL mode for cooling.
To set the COOL mode:
1. Press the MODE pad until the COOL indicator light is lit.
2. Press the FANóäç÷òöè÷ÑÒÐÑÖÎÍÒÞÖòõÕØàéäñ
speed.
3. Press + or - to set the desired temperature between 64°F
and 86°F in 1°F increments.
After settings have been made, the display will not change
back to show the room temperature.
The temperature control is used to maintain the room
temperature. The compressor will cycle on and off to keep
the room at the set level of comfort. Set the temperature
control at a lower number and the indoor air will become
cooler. Set the temperature control at a higher number
and the indoor air will become warmer. NOTE:Òé÷ëèäìõ
conditioner is off and is then turned on while set to COOL,
it will take approximately 3 minutes for the compressor to
start and cooling to begin.
Cooling Descriptions
For Normal Cooling—Select the COOL mode and HIGH,
MEDIUM, or LOW fan speed with a middle set temperature.
For Maximum Cooling—Select the COOL mode
and HIGH fan speed with a lower set temperature.
For Quieter & Nighttime Cooling—Select the COOL mode
and LOW fan speed with a middle set temperature.
×ØÝÎIf you switch from COOL or DRY mode setting to
OFF, wait 3 minutes before restarting.
DRY Mode—Dehumidification
Use the DRY mode to provide dehumidification only. The
fan will run at a fixed speed at this setting, so a fan speed
cannot be set. Keep windows and doors closed for the best
dehumidifying effects.
To set the DRY mode:
•Press the MODE pad until the DRY indicator light is lit.
Òñ÷ëèÍÛâðòçèäöè÷÷èðóèõä÷øõèúìïïñò÷åèçìöóïäüèç
Êé÷èõÍÛâðòçèëäöåèèñöè÷÷ëèçìöóïäüúìïïæëäñêèåäæî÷ò
show the room temperature.
NOTE: Òéüòøöúì÷æëéõòðäÍÛâöè÷÷ìñê÷òØÏÏòõ÷òäéäñ
setting, wait at least 3 minutes before switching back to a
ÍÛâöè÷÷ìñê
If using the unit in the DRY mode as a dehumidifier for an
extended time.
1. Unplug the power cord.
2. Connect a ½” Outer diameter flexible drain hose to the
upper drain port and drain to floor drain.
3. Reconnect the power cord and press the MODE pad until
the DRY indicator light is lit.
FAN Mode
Use the FAN mode to provide air circulation and filtering
without cooling.
To set the FAN mode:
• Press the FAN pad until the desired indicator light for high,
medium, or low fan speed is lit.
Since fan only settings do not provide cooling, a set
÷èðóèõä÷øõèúìïïñò÷åèçìöóïäüèçÊé÷èõÏÊ×öóèèçëäö
been set, the display will change back to show the room
temperature.
The exhaust hose and window kit do not need to be installed
when operating in fan mode.”
Power Outage Recovery Feature
In the case of a power outage or interruption, the unit will
automatically re-start in the settings last used after the
power is restored.
NOTE: If the TIMER was set before the power outage, it will
need to be reset after power is restored.
CONTROLS
Set Temperature will be shown when unit is in operation.
49-5000614 Rev. 2 7
ENGLISH
Features and appearance may vary.
Icons on the remote control indicate the selected settings
ć
C
A
B
C
D
E
F
REMOTE CONTROL
1. Insert the two batteries (provided).
2. Aim the remote control at the signal receiver on the
control panel to operate the air conditioner.
A. Power
Turns ON/OFF power to the air conditioner.
NOTE: Turning off power by pressing the Power button does
NOT disconnect the appliance from the power supply.
• Press the Power button. The Power indicator will illuminate.
B. Mode
Press the Mode button to toggle among the operating
options. The corresponding indicator will illuminate:
Cool – Cools the room to the set temperature
DRY – Reduces the humidity in the room
Fan – Circulates the air in the room without cooling
C. Temperature
Adjusts the Temperature or Hours in Time Delay.
To Set the Temperature:
The temperature can be set between 61ºF and 89ºF (17ºC
and 30º C) when the air conditioner is in Cool mode.
1. Press the Mode button until the Cool mode is selected.
2. Press the Up Arrow or Down Arrow buttons to select the
Temperature.
NOTE: The temperature cannot be set when the air
conditioner is in either Fan or DRY mode.
D. Fan Speed
The fan speed can be adjusted from Low, Medium, to High
speed when the air conditioner is in operation.
NOTE: The fan speed cannot be adjusted when the unit is in
DRY mode.
• Press the Fan Speed button to toggle among the three speeds.
The corresponding fan speed indicator will illuminate.
E. Timer
Program a time from (1-hour to 24-hours) for the air
conditioner to turn Off or On. When a Time Delay is
programmed, the Timer indicator light will illuminate.
F. Swing Button
The louvers on your portable air conditioner will open
automatically (do not pry them open or push them shut).
Use the Swing Button on your remote to adjust the louvers
in the position you would like them to be in, or to operate
in Swing mode the louvers will continue to move up and
down.
Cool
Swing Fan Speed
Fan
Dry
Heat
CONTROLS
849-5000614 Rev. 2
ENGLISH
Air Filter
The air filters should be cleaned at least every two weeks for
your unit to operate at optimum efficiency.
CAUTION DO NOT operate the air conditioner
without a filter because dirt and lint will clog it and reduce
performance.
To remove:
1. Unplug or disconnect power.
2. Pull to remove upper filter panel.
3. Wash or vacuum the dust from the air filters.
NOTE: If washed, gently shake the filter to remove the
excess water and dust particles trapped in the filter.
4. Reinstall the filters.
5. Plug in or reconnect power.
CLEANING 1. Unplug or disconnect power.
2. Use only a soft cloth dampened with water to clean the
cabinet.
NOTE:
•Do not use a liquid or spray cleaner to clean the air
conditioner.
•DO NOT use chemicals, abrasives, ammonia, chlorine
bleach, concentrated detergents, solvents or scouring
pads. Some of these chemicals/items may damage and/or
discolor your air conditioner.
3. Dry thoroughly with a soft cloth.
4. Plug in or reconnect power.
WARNING
Electrical Shock Hazard
Disconnect power before cleaning.
Failure to do so can result in death or electrical shock.
CARE AND CLEANING
49-5000614 Rev. 2 9
ENGLISH
How to Insert the Batteries in the Remote Control
1. Remove the battery cover by sliding it according to the
arrow direction.
2. Insert new batteries, making sure that the (+) and (–) of
battery are installed correctly.
3. Reattach the cover by sliding it back into position.
NOTES:
• Use 2 “AAA” (1.5 volt) alkaline batteries. Do not use
rechargeable batteries.
• Remove the batteries from the remote control if the
system is not going to be used for a long time.
• Do not mix old and new batteries. Do not mix alkaline,
standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc)
batteries.
Storage
If the unit is not being used for a long period of time:
To Empty the Internal Water Tank:
1. Unplug or disconnect power.
2. Drain the water from the water tank. (See “Internal Water
Tank section” above.)
3. Use the original packaging to repack the unit to avoid a
buildup of dust or dirt.
4. Store the air conditioner in a cool, dry location.
Internal Water Tank
The Water Full indicator (“FL” on the control panel display)
illuminates when the internal water tank has filled with
condensed water.
To Empty the Internal Water Tank:
1. Unplug or disconnect power.
2. Place a shallow 1 quart or larger pan (not included) below
the lower drain located on the back (near the bottom) of
the air conditioner.
3. Remove the cap and the rubber plug and drain the water
tank.
4. Re-insert the drain plug and screw the cap snugly into
place.
5. Plug in or reconnect power.
CARE AND CLEANING
10 49-5000614 Rev. 2
ENGLISH
LOCATION REQUIREMENTS
• Place the air conditioner on a flat, level surface. For
optimal performance place portable 20” from exterior
wall. For all other sides a minimum distance of 30” should
be maintained.
• Keep the air conditioner free of any obstructions such as
drapes, curtains, blinds, etc.
• The exhaust hose should be free of any obstructions.
• Do not place the air conditioner on an unstable or raised
surface because it could fall and cause damage or injury.
• Do not place the air conditioner in direct sunlight or near
a heat source such as baseboard heaters, stoves, etc.
• The window panel can be installed in a window with a
minimum 20” (55.88 cm) to a maximum 46” (121.92)
opening.
Questions? Call Haier at 866.907.1566 or visit our Website at: haierappliances.com.
BEFORE YOU BEGIN
Read these instructions completely and carefully.
• IMPORTANT — Save these instructions for local
inspector’s use.
• IMPORTANT — Observe all governing codes and
ordinances.
• Note to Installer – Be sure to leave these instructions
with the Consumer.
• Note to Consumer – Keep these instructions for future
reference.
• Skill level – Installation of this appliance requires basic
mechanical skills.
• Completion time – Approximately 1 hour
• We recommend that two people install this product.
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not
covered under the Warranty.
• You MUST use all supplied parts and use proper
installation procedures as described in these
instructions when installing this air conditioner.
ÎÕÎÌÝÛÒÌÊÕÛÎÚÞÒÛÎÖÎ×ÝÜ
Some models require a 115/120-volt AC,
60-Hz grounded outlet protected with a 15-amp
time-delay fuse or circuit breaker.
The 3-prong grounding plug minimizes the possibility of
electric shock hazard. If the wall outlet you plan to use is
only a 2-prong outlet, it is your responsibility to have it
replaced with a properly grounded 3-prong wall outlet.
CAUTION
Do not, under any circumstances, cut or remove the third
(ground) prong from the power cord.
Do not change the plug on the power cord of this air
conditioner.
Aluminium house wiring may present special problems—
consult a qualified electrician.
Power cord includes a current
interrupter device. A test and reset
button is provided on the plug case. The
device should be tested on a periodic
åäöìöåüéìõö÷óõèööìñê÷ëèÝÎÜÝåø÷÷òñ
äñç÷ëèñ÷ëèÛÎÜÎÝåø÷÷òñúëìïè
plugged into the outlet. If the
ÝÎÜÝåø÷÷òñçòèöñò÷÷õìóòõìé÷ëè
ÛÎÜÎÝåø÷÷òñúìïïñò÷ö÷äüèñêäêèç
discontinue use of the air conditioner
and contact a qualified service
technician.
RESET
TEST
INSTALLATION INSTRUCTIONS
49-5000614 Rev. 2 11
ENGLISH
1. Control Panel
2. Swing Air Louvers
3. Casters
4. Exhaust Hose Assembly
5. Window Sealing Plate Assembly
6. Remote Control
7. Filter Panel
8. Power Cord Hook (2)
9. Handle (2)
10. Air Vent - Exhaust
11. Continuous Drainage Hole
12. Air Inlet Grille
13. Drainage Hole
14. Power Cord and Plug
15. Small Screw
PARTS INCLUDED (Appearance may vary)
INSTALLATION INSTRUCTIONS
1
3
6
7
9
11
12
14
13
8
10
2
12 49-5000614 Rev. 2
ENGLISH
2. INSTALL EXHAUST HOSE
ASSEMBLY TO BACK OF UNIT
Install the exhaust hose assembly by twisting the round
adapter counterclockwise into the exhaust port on the
back of the Air Conditioner.
1. UNPACK AIR CONDITIONER
• Remove packaging materials. Save the carton and
the foam packaging for storing the air conditioner
when not in use.
NOTE: There are NO packing materials inside the air
conditioner to remove—Do Not open the cabinet.
• Properly dispose of/recycle all packing material.
• Handle the air conditioner gently.
• Keep the air conditioner upright and level. Do not
set the air conditioner on its side, front, back or
upside down.
WARNING
Excessive Weight Hazard
Use two or more people to move and install air
conditioner.
Failure to do so can result in back or other injury.
3. INSTALL WINDOW PANELS
A. Measure the window opening. For a 20”
opening, use just the middle panel of the
Window Kit with the opening for the Exhaust
Hose Adapter. For openings from 20” to 33”,
insert one side panel to the middle panel, for
openings from 33” to 46”, insert both side
panels.
B. Place the Window Kit into the window opening
(the Cam Locks should be towards you) and
slide the side panels (if being used) outward to
fill the opening. Lock the panels in place with
the Cam Locks. Apply the foam seals to the
top, bottom and ends to provide the best seal.
Slide the window shut against the Window Kit.
Indoor
Indoor
Cam lock
INSTALLATION INSTRUCTIONS
49-5000614 Rev. 2 13
ENGLISH
4. CONNECT EXHAUST HOSE TO THE
WINDOW PANEL
Place the Air Conditioner 20” (55.88 cm) from the wall
and any other obstructions. Extend the hose so that
it reaches the Window Kit. Insert the Exhaust Hose
Adapter into the opening in the Window Kit and slide
it into the locking position. Ensure that the hose runs
straight to the window with no excess extension. Use
the small screw to attach the exhaust hose assembly to
the window sealing plate assembly.
Important: The Air Conditioner must be vented to the
outside. Do not use a longer hose or extend the hose
included with the Air Conditioner or the unit will not cool
properly and will overheat.
5. COMPLETE INSTALLATION
A. Plug the power cord into a grounded 3 prong
outlet.
B. Press the Reset button on the plug to ensure
the safety plug is providing power to the Air
Conditioner.
C. When removing the Air Conditioner, be sure to
remove the Window Kit.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power
cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or
electrical shock.
RESET
TEST
INSTALLATION INSTRUCTIONS
20”
50cm
14 49-5000614 Rev. 2
ENGLISH
Problem Possible Causes Solution
Unit does not start or
operate Power supply cord is not plugged into an
outlet. Plug the power cord into a grounded 3 prong
outlet.
Power supply cord has tripped. Press and release the RESET button on the power
supply cord.
The Power button has not been pressed. Press the Power button on the Control Panel or
Remote Control to turn ON the air conditioner.
There is no power to the electrical outlet. Plug a working lamp into the outlet to check for
power.
A household fuse has blown or a circuit
breaker has tripped. Replace the fuse or reset the circuit breaker.
The control was programmed for a Time
Delay. Cancel the Time Delay. See “Control Panel.”
The batteries in the remote control are dead. Replace the batteries.
The internal water tank is full.
NOTE: The air conditioner automatically
turns off, and the Water Full indicator
illuminates to alert you of this condition.
Empty the water tank. See “Air Conditioner
Care.”
Remote control is not
working Batteries are dead. Replace the batteries.
Batteries are installed incorrectly. Make sure the batteries are inserted in the
correct position.
Air conditioner is
working but the room
is not cooling.
The room temperature is hot.
NOTE: On extremely hot and humid days,the
air conditioner will take longer to cool the
room.
Allow time for the room to cool when you first
turn on the unit.
Make sure the air conditioner has an adequate
BTU rating for the size of the room being cooled.
The control is set incorrectly to Fan or DRY
mode. Set the Mode to Cool and the Fan Speed to High.
Airflow is restricted. Remove any obstacles to the airflow and redirect
airflow for uniform cooling.
Temperature set too high. Lower the set temperature.
Air filters are dirty or restricted. Clean the air filter. See “Air Conditioner Care.”
Air conditioner installed incorrectly Check the exhaust hose and window panel for
proper installation.
Doors and windows are open. Close the doors and windows to the room being
cooled to prevent cooled air from escaping.
Error Codes
Error Codes Meaning
E1 Abnormal sense of coil pipe sensor
E2 Abnormal sense of room temperature sensor
E4 Anti-frozen protection
FL Full water
TROUBLESHOOTING TIPS
49-5000614 Rev. 2 15
ENGLISH
REGULATORY INFORMATION
FCC/IC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician
for help.
Labelling: Changes or modifications to this unit not expressly
approved by the manufacturer could void the user’s authority to
operate the equipment.
*Select Models Only
This product has WiFi capability and requires Internet connectivity
and a wireless router to enable interconnection with an Energy
Management System, and/or with other external devices, systems
or applications.
Use of the Works with Apple HomeKit™ logo means that an
electronic accessory has been designed to connect specifically to
iPod touch®, iPhone®, or iPad®, respectively, and has been certified
by the developer to meet Apple® performance standards. Apple is
not responsible for the operation of this device or its compliance
with safety and regulatory standards.
How it Works
Download the Haier Home App
Use the app to connect your room air
conditioner to WiFi Once connected, use the app to turn
down your air conditioner as you leave
work.
CHANGE TEMP
TO 65
Haier Appliances WiFi Connect (for customers in the United States)
Haier Appliances WiFi Connect Enabled*. If your Air Conditioner (AC) has a Connected Appliance Information label
located on the outside as shown below, your AC is Haier Appliances WiFi Connect Enabled. A WiFi
communication card is built
into the product allowing it to communicate with your smart phone for remote monitoring, control and notifications. Please visit
haierappliances.com/connect to learn more about connected appliance features, and to learn what connected appliance apps
will work with your smart phone.
Network: GE_MODULE_XXXX
PASSWORD: XXXXXXXX
MAC ID: XX-XX-XX-XX-XX-XX
CONTAINS FCCID: ZKJ-WCATA006 CONTAINS IC: 100229A-WCATA006
WIFI SETUP (on some models)
Getting Started
To connect your room air conditioner, you’ll need the Haier
Appliances App. The app will walk you through the connection
process. Download the app from iTunes or Google Play.
All connected appliance data is held in strict accordance with
the Haier Appliances Connected Data Privacy Policy. Visit
geappliances.com/privacy/privacy_policy_connected to
view this policy.
Questions about WiFi Connect
Get answers you need about setting up WiFi appliances and
connecting to your home network in our support articles.
Visit products.geappliances.com/appliance/gea-support-
search-content to view WiFi connect room air conditioner
support articles.
16 49-5000614 Rev. 2
ENGLISH
Staple your receipt here. Proof of the original purchase date is
needed to obtain service under the warranty.
EXCLUSION OF IMPLIED WARRANTIES - Your sole and exclusive remedy is product repair as provided in this Limited
Warranty. Any implied warranties, including the implied warranties of merchantability or fitness for a particular purpose,
are limited to one year or the shortest period allowed by law.
For US Customers: This limited warranty is extended to the original purchaser and any succeeding owner for products
purchased for home use within the USA. If the product is located in an area where service by a Haier Appliances Authorized
Servicer is not available, you may be responsible for a trip charge or you may be required to bring the product to an
Authorized Haier Appliances Service location for service. In Alaska, the limited warranty excludes the cost of shipping or
service calls to your home.
Some states do not allow the exclusion or limitation of incidental or consequential damages. This limited warranty gives
you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights
are, consult your local or state consumer affairs office or your state’s Attorney General.
Warrantor US:
GE Appliances, a Haier company
Louisville, KY 40225
• Customer instruction. This owner’s manual provides
information regarding operating instructions and user
controls.
• Improper installation. If you have an installation problem,
or if the air conditioner is of improper capacity, contact
your dealer or installer. You are responsible for providing
adequate electrical connecting facilities.
• Failure of the product resulting from modifications to the
product or due to unreasonable use including failure to
provide reasonable and necessary maintenance.
• Replacement of house fuses or resetting of circuit
breakers.
• Failure due to corrosion on models not corrosion-
protected.
• Damage to the product caused by improper power
supply voltage, accident, fire, floods or acts of God.
• Incidental or consequential damage caused by possible
defects with this air conditioner.
• Damage caused after delivery.
What Will Not Cover:
For The Period Of: Haier Appliances Will Replace:
One Year
From the date of the
original purchase
Replacement, repair, or refund of the original retail price for any product which fails due to a
defect in materials or workmanship. If the unit is exchanged, the replacement unit is warranted
for the remainder of your product’s original one-year warranty period. Haier Appliances will, at its
sole discretion, replace the product with a product of the same or comparable functionality and
quality or refund the original retail price.
• Properly pack your unit. We recommend using the original
carton and packing materials.
• Return the product to the retail location where it was
purchased.
• Include in the package a copy of the sales receipt or other
evidence of date of original purchase. Also print your name
and address and a description of the defect.
In Order to Make a Warranty Claim During the First 90 Days from the Date of Original Purchase:
• Locate your original sales receipt and make a note of your
model and serial number.
• Visit haierappliances.com to initiate the product
replacement process.
• You will be asked to provide your name, address, date of
purchase, model and serial number.
• Haier Appliances will arrange for a carton to be sent to your
home to recover the product.
• Please return all requested materials (postage pre-paid)
in the carton provided. Please include a description of the
defect.
• You should receive your replacement product or refund
within 7 to 10 business days after your package is received.
In Order to Make a Warranty Claim During the Remainder of the One-Year Warranty:
LIMITED WARRANTY
49-5000614 Rev. 2 17
FRENCH
TABLE DES MATIÈRES
CONSIGNES DE SÉCURITÉ IMPORTANTES ........................................................................ 4
COMMANDES .....................................................................................................5
ENTRETIEN ET NETTOYAGE ..................................................................................... 8
INSTRUCTIONS D’INSTALLATION ............................................................................... 10
CONSEILS DE DÉPANNAGE ..................................................................................... 14
CONFIGURATION DU WI-FI ...................................................................................... 15
GARANTIE LIMITÉE ..............................................................................................16
Nous vous remercions de votre achat de ce produit Haier. Ce manuel
d’installation vous aidera à obtenir le meilleur rendement de votre
nouvelle thermopompe.
Pour référence ultérieure, inscrivez les numéros de modèle et de série
qui figurent sur l’étiquette apposée sur le côté de votre thermopompe
avec la date de l’achat.
Brochez votre preuve d’achat à ce manuel pour faciliter le service sous
garantie le cas.
_______________________________________
Numéro de modèle
_______________________________________
Numéro de série
_______________________________________
Date de l’achat
Pour enregistrer votre nouveau système sans conduit Haier, allez sur
haierappliances.com/support/register-ductless
et saisissez les numéros de série et de modèle sur cette page. Pour
recevoir une garantie de 10 ans sur le compresseur et les pièces,
l’enregistrement est requis dans les 60 jours suivant l’installation.
CONSERVER DANS VOS DOSSIERS
18 49-5000614 Rev. 2
FRENCH
CONSIGNES DE SÉCURITÉ IMPORTANTES
INSTRUCTIONS DE SÉCURITÉ IMPORTANTES
WARNING Afin de réduire le risque d’incendie, de choc
électrique, de blessures corporelles ou de dommage lors de
l’utilisation du climatiseur, observez des précautions
élémentaires dont les suivantes:
• Lisez toutes les instructions avant d’utiliser cet appareil.
• Branchez l’appareil dans une prise à 3 trous avec mise à la terre.
• Ne retirez pas la broche de mise à la terre.
• N’utilisez pas un adaptateur.
• N’utilisez pas un cordon de rallonge.
• N’utilisez pas le climatiseur si son cordon ou sa fiche sont
endommagés, s’il ne fonctionne pas correctement ou s’il a été
échappé ou endommagé autrement.
• Haier n’offre aucun service de réparation du climatiseur.
Consultez les renseignements de la garantie pour voir les
options de remboursement ou d’échange.
• Coupez l’alimentation électrique avant une réparation ou un
entretien.
• Coupez l’alimentation électrique avant le nettoyage.
REMARQUE : Mettre l’appareil hors tension (OFF) en appuyant
sur le bouton Power NE coupe PAS l’alimentation électrique au
climatiseur.
• N’installez pas et n’utilisez pas le climatiseur dans une zone où
l’atmosphère contient des gaz combustibles ou est contaminée.
Évitez de mettre un produit chimique en contact avec votre
climatiseur.
• Ne rangez aucune objet directement sur le dessus du
climatiseur.
• Utilisez deux personnes ou plus pour déplacer ou installer le
climatiseur.
• Ne faites pas fonctionner le climatiseur sans que le filtre ne soit
en place.
• N’utilisez pas le climatiseur près d’une baignoire, d’une douche,
d’un lavabo ou d’un autre endroit mouillé.
LIRE ET CONSERVER CES INSTRUCTIONS
• N’utilisez pas de moyens visant à accélérer le dégivrage ou le
nettoyage autres que ceux recommandés par le fabricant.
• Le produit doit être entreposé dans une pièce exempte de
sources d’allumage qui fonctionnent sans interruption (par
exemple : flammes nues, appareil d’utilisation du gaz ou
radiateur électrique en fonctionnement.
• Abstenez-vous de percer ou de brûler la tubulure de réfrigérant.
Sachez que les réfrigérants peuvent être inodores.
• Gardez les orifices de ventilation libres de toute obstruction.
• Lors de la manipulation, de l’installation et de l’utilisation de
cet appareil, prenez soin de ne pas endommager la tubulure de
réfrigérant.
• Ne percez pas de trou dans le climatiseur.
• L’entretien, le nettoyage et les réparations doivent être
effectués uniquement par des techniciens adéquatement
formés pour manipuler des réfrigérants inflammables.
• GE Appliances ne prend pas en charge l’entretien ou la
réparation du climatiseur.
• Mettez le climatiseur au rebut conformément aux
réglementations fédérale et locale. Les réfrigérants
inflammables exigent des procédures de mise au rebut
spéciales. Communiquez avec les autorités locales
compétentes pour vous départir de votre climatiseur d’une
manière qui soit sans danger pour l’environnement.
WARNING Risque d’incendie ou d’explosion. Cet appareil contient un réfrigérant inflammable.
Des mesures de sécurité supplémentaires doivent être observées.
WARNING Insertion des piles dans la télécommande
Ûè÷ìõèýïèæòøùèõæïèçèöóìïèöèñïèêïìööäñ÷çäñöïèöèñöçèïä
flèche.
ÒñöŻõèýïèöñòøùèïïèöóìïèöèñùòøöäööøõäñ÷ôøèïèøõöóƴïèö¤¥
et (–) sont placés correctement
ÛŻìñö÷äïïèýïèæòøùèõæïèèñïèêïìööäñ÷Ƒöäóòöì÷ìòñìñì÷ìäïè
REMARQUES :
Þ÷ìïìöèý"óìïèöäïæäïìñèö¯ÊÊÊ°¤!%ùòï÷¥×đø÷ìïìöèýóäöçèö
piles rechargeables.
Ûè÷ìõèýïèöóìïèöçèïä÷ŻïŻæòððäñçèöìïèöüö÷ƒðèõèö÷èõä
inutilisé durant une longue période de temps.
×èðŻïäñêèýóäöøñèñòøùèïïèóìïèäùèæøñèäñæìèññè×è
mélangez pas des piles alcalines avec des piles standard
(carbone-zinc) ou rechargeables (ni-cad, ni-mh, etc.).
WARNING Danger en cas d’ingestion. Une pile peut causer un étouffement si elle est ingérée par
un enfant.
49-5000614 Rev. 2 19
FRENCH
Les fonctions et l’apparence peuvent varier.
Les témoins lumineux vis-à-vis des touches sur le panneau de commande du climatiseur indiquent les réglages choisis.
COMMANDES
A. Écran du panneau de commande
Affiche le réglage de la température en degrés Fahrenheit.
Le témoin lumineux correspondant va s’allumer.
B. Bouton marche/arrêt (Power)
Met le climatiseur sous (ON) ou hors (OFF) tension.
REMARQUE : Mettre l’appareil hors tension (OFF)
en appuyant sur le bouton Power NE coupe PAS
l’alimentation électrique au climatiseur
• Pressez le bouton Power. Le témoin lumineux Power va
s’allumer.
C. Bouton des modes
Pressez le bouton Mode pour défiler parmi les options de
fonctionnement. Le témoin lumineux correspondant va
s’allumer :
Chauffage (Heat) (certains modèles) - Chauffe la pièce à la
température du réglage
Ûèéõòìçìööèðèñ÷¤Ìòò異Ûèéõòìçì÷ïäóìƒæèƑïä
température du réglage.
ÍŻöëøðìçìéìæä÷ìòñ¤Íõü¥¢ÛŻçøì÷ïđëøðìçì÷Żçäñöïäóìƒæè
Ventilateur (Fan) – Fait circuler l’air dans la pièce sans
refroidissement
D. Réglage de la minuterie et de la température
Ûƒêïèïä÷èðóŻõä÷øõèòøïèöëèøõèöçøçŻïäìóõòêõäððŻ
avec la minuterie.
Pour régler la température :
Vous pouvez régler la température entre 64°F et 86°F
(18°C et 30°C) lorsque le climatiseur est mode de
refroidissement.
1. Pressez le bouton Mode jusqu’à sélectionner le mode
Cool.
"Ùõèööèýïèöåòø÷òñö¤¥òø¤¡¥óòøõöŻïèæ÷ìòññèõïä
température.
REMARQUE : Vous ne pouvez pas régler la température
lorsque le climatiseur se trouve dans le mode Fan ou Dry.
E. Bouton de vitesse du ventilateur (Fan)
Vous pouvez régler le ventilateur à basse (Low), moyenne
(Medium) ou haute (High) vitesse lorsque le climatiseur
fonctionne.
REMARQUE : Vous ne pouvez pas régler la vitesse du
ùèñ÷ìïä÷èøõïòõöôøèïèæïìðä÷ìöèøõèö÷çäñöïèðòçèÍÛâ
• Pressez le bouton Fan Speed pour faire défiler les trois
vitesses du ventilateur. Le témoin lumineux de la vitesse
correspondante va s’allumer.
1. Mode de ventilateur continu
Pour activer le mode de ventilateur continu, maintenez
une pression sur le bouton Fan Speed durant 3 secondes
óøìöõèïƭæëèýÕèöïè÷÷õèö¯ÌÏ°ùòñ÷öđäééìæëèõƑïđŻæõäñ
pour signaler l’activation du mode de ventilateur
continu. Une fois la température de consigne atteinte, le
ventilateur intérieur continue de fonctionner.
F. Bouton de la minuterie (Timer)
Ùèõðè÷çèóõòêõäððèõøñçŻïäì¤çè!Ƒ"$ëèøõèö¥óòøõ
démarrer ou arrêter le climatiseur. Lorsqu’un délai
est programmé, le témoin lumineux de la minuterie va
s’allumer.
Alors que le climatiseur fonctionne :
1. Appuyez sur le bouton Timer.
"Ùõèööèýïèöåòø÷òñö¤¥òø¤¡¥óòøõöŻïèæ÷ìòññèõïè
nombre d’heures durant lequel le climatiseur doit
continuer à fonctionner avant de s’éteindre.
REMARQUE :Ê÷÷èñçèýèñùìõòñ%öèæòñçèöóòøõ
sauvegarder le délai.
Alors que le climatiseur est en arrêt :
1. Appuyez sur le bouton Timer.
"Ùõèööèýïèöåòø÷òñö¤¥òø¤¡¥óòøõöŻïèæ÷ìòññèõïè
nombre d’heures durant lequel le climatiseur doit rester
en arrêt avant de se mettre en marche.
REMARQUE :Ê÷÷èñçèýèñùìõòñ%öèæòñçèöóòøõ
sauvegarder le délai.
Pour annuler la minuterie :
• Pressez le bouton Timer une fois, les heures qui restent
vont clignoter, pressez le bouton Timer de nouveau et la
minuterie sera annulée.
A
BC EF
D
" 49-5000614 Rev. 2
FRENCH
COMMANDES
Mode de refroidissement (Cool)
Utilisez le mode COOL pour refroidir la pièce.
Pour régler le mode COOL :
1. Pressez la touche MODE jusqu’à ce que le témoin lumineux COOL
s’allume.
"Ùõèööèýïä÷òøæëèÏÊ×óòøõõŻêïèõïäùì÷èööèçøùèñ÷ìïä÷èøõƑ
ÑÒÐÑÖÎÍÒÞÖòøÕØà
#Êóóøüèýöøõ¤¥òø¤¡¥óòøõõŻêïèõïä÷èðóŻõä÷øõèçŻöìõŻèèñ÷õè
64°F et 86°F par sauts de 1°F.
Une fois les réglages terminés, l’écran ne retournera pas à
l’affichage de la température ambiante.
La commande de température est utilisée pour maintenir la
température ambiante. Le compresseur va s’allumer et s’éteindre
en alternance pour maintenir la pièce au niveau de confort que vous
äùèýõŻêïŻÛŻêïèýïäæòððäñçèçè÷èðóŻõä÷øõèƑøñèùäïèøõóïøö
åäööèè÷ïđäìõìñ÷ŻõìèøõçèùìèñçõäóïøöéõòìçÛŻêïèýïäæòððäñçèçè
température à une valeur plus haute et l’air intérieur deviendra plus
chaud.
REMARQUE : Si le climatiseur est éteint et qu’il est allumé alors
qu’il est réglé à COOL, il faudra environ 3 minutes pour démarrer le
compresseur et le refroidissement.
Réglage du refroidissement
Pour un refroidissement normal — Sélectionnez le mode COOL et
ïäùì÷èööèçèùèñ÷ìïä÷èøõÑÒÐÑÖÎÍÒÞÖòøÕØàäùèæøñõŻêïäêèçè
température moyen.
Pour un refroidissement maximal — Sélectionnez le mode COOL
è÷ïäùì÷èööèçèùèñ÷ìïä÷èøõÑÒÐÑäùèæøñõŻêïäêèçè÷èðóŻõä÷øõè
bas.
Pour un refroidissement plus silencieux et de nuit — Sélectionnez
ïèðòçèÌØØÕè÷ïäùì÷èööèçèùèñ÷ìïä÷èøõÕØàäùèæøñõŻêïäêèçè
température moyen.
REMARQUEÜìùòøöóäööèýçøðòçèÌØØÕòøÍÛâƑïäðìöèèñ
arrêt (OFF), attendez 3 minutes avant de redémarrer.
Mode DRY — Déshumidification
Þ÷ìïìöèýïèðòçèÍÛâóòøõïäçŻöëøðìçìéìæä÷ìòñöèøïèðèñ÷Êùèææè
mode, le ventilateur tourne à une vitesse fixe qu’il est impossible
de modifier. Gardez les fenêtres et les portes fermées pour une
déshumidification plus efficace.
Pour régler le mode DRY :
¬Ùõèööèýïä÷òøæëèÖØÍÎíøöôøđƑæèôøèïè÷ŻðòìñïøðìñèøûÍÛâ
s’allume.
ÍäñöïèðòçèÍÛâïèõŻêïäêèçè÷èðóŻõä÷øõèñđèö÷óäöäééìæëŻ
ÞñèéòìöïèðòçèÍÛâõŻêïŻïđŻæõäñõè÷òøõñèõäƑïđäééìæëäêèçèïä
température ambiante.
REMARQUEÜìùòøöóäööèýçèÍÛâƑØÏÏòøƑÏÊ×ä÷÷èñçèýäø
ðòìñö#ðìñø÷èöäùäñ÷çèõèùèñìõƑÍÛâ
Üìùòøöø÷ìïìöèýïđäóóäõèìïäøðòçèçèçŻöëøðìéìæä÷ìòñ¤ÍÛâ¥æòððè
déshumidificateur pendant une longue période.
1. Débranchez le cordon d’alimentation.
"Ûäææòõçèýøñ÷øüäøçđŻùäæøä÷ìòñéïèûìåïèäüäñ÷øñçìäðƒ÷õèçè
!¦"óò¤!#ðð¥èû÷ŻõìèøõƑïđòõìéìæèçèéøì÷èöøóŻõìèøõè÷ùìçèý
vers le drain de sol.
#Ûèåõäñæëèýïèæòõçòñçđäïìðèñ÷ä÷ìòñè÷äóóøüèýöøõïä÷òøæëè
ÖØÍÎíøöôøđƑæèôøèïè÷ŻðòìñïøðìñèøûÍÛâ¤çŻöëøðìçìéìæä÷ìòñ¥
s’allume.
Mode FAN (ventilateur)
Utilisez le mode FAN pour faire circuler et filtrer l’air sans
refroidissement.
Pour régler le mode FAN :
• Pressez la touche FAN jusqu’à ce que le témoin lumineux de la
vitesse de votre choix s’allume (High, Medium ou Low).
Étant donné qu’un réglage de ventilateur seul ne génère pas de
refroidissement, le réglage de température ne sera pas affiché. Une
fois la vitesse de ventilateur réglée, l’écran retournera à l’affichage
de la température ambiante.
Òïñđèö÷óäöñŻæèööäìõèçđìñö÷äïïèõïè÷øüäøçđŻùäæøä÷ìòñè÷ïä÷õòøööè
de fenêtre lorsqu’on fonctionne en mode FAN.
Fonction de récupération suivant une panne de courant
En cas de panne de courant ou d’interruption, le climatiseur va
redémarrer automatiquement dans les réglages utilisés en dernier
avant le rétablissement du courant.
REMARQUE : Si la minuterie a été réglée avant la panne de courant,
elle devra être réglée de nouveau une fois le courant rétabli.
Le réglage de la température de consigne est affiché lorsque ce climatiseur fonctionne.
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
Haier QPCA10 Le manuel du propriétaire
- Catégorie
- Climatiseurs mobiles
- Taper
- Le manuel du propriétaire
dans d''autres langues
- italiano: Haier QPCA10 Manuale del proprietario
- English: Haier QPCA10 Owner's manual
- español: Haier QPCA10 El manual del propietario
- dansk: Haier QPCA10 Brugervejledning