Robern CRAFT Series Manuel utilisateur

Marque: Robern

Modèle: CRAFT Series

Taper: Manuel utilisateur

1Part no. 209-1313 04/20/2021

IQ Digital Lock Box

800.877.2376 www.robern.com

IQ™ DIGITAL LOCK BOX

Installation Instructions

Important safety instructions - Save these instructions

Tools Needed - 2

Parts - 2

Notes - 3

Dimensions - 3

New Installation: Portray / R3 / Uplift Tech - 4

New Installation: PL / M / PC / DC / AC / YC - 6

Existing Recessed Installation - 8

Existing Surface Installation - 9

Finish the Installation - 10

Use and Maintenance - 11

Cleaning - 11

Warranty - 11

Compliance - 12

This instruction sheet contains information on how to install a lock box and shelf in a variety of applications. This product kit ts dierent

cabinet sizes. Read the specic instruction for how your lock box and shelf will be installed. Cabinet sold separately.

Save these instructions for future use and reference. An improper installation voids the warranty. Carefully inspect the lock box, shelf

and hardware for damage prior to installation. Installed products cannot be returned.

If you experience any problems with your lock box, contact your dealer or Robern directly.

Limited Warranty — One Year Term

CONTENTS

GENERAL INFORMATION

Uplift Tech 24

Uplift Tech 30, 36, 48*

(*Can only be installed on the

right side of electrical column)

Portray 16, 20, 24

PL Series 16, 20, 24

Proles 16, 20, 24

MC Series 16, 20, 24

DC Series 16, 20, 24

AiO 24, Vitality 24

R3 Series 20, 24

2Part no. 209-1313 04/20/2021

IQ Digital Lock Box

800.877.2376 www.robern.com

TOOLS NEEDED

PARTS

*Depending on installation, not all parts will be used.

[217-1382]

Quick Start Guide

Registration Card

[203-1510]

(2) Lock Box Key

Lock Box Shelf

[211-1331]

Digital Lock Box

[216-1192]

Hardware Bag*

[211-1325]

(2) Mounting Block

[211-1328]

(4) Locking Pin

[203-1492]

(4) #10 x 3/8" Screw

[203-1493]

(4) #6 x 3/8" Screw

[SS125]

(4) #6 x 3/4" Screw

[216-1193]

Quick Start Bag

US E R

S E T U P

G U I D E

™

DIGITAL

LOC K BOX

™

DIGITAL LO C K B OX

3Part no. 209-1313 04/20/2021

IQ Digital Lock Box

800.877.2376 www.robern.com

NOTES

DIMENSIONS

228.6

133.4

5-1/4"

2-7/16"

238.3

9-3/8"

WARNING! To reduce the risk of electrical shock, shut o power before installing in an electrically powered cabinet.

9-3/8"

(238mm)

2-7/16"

(62mm)

5-1/4"

(133mm)

(229mm)

4Part no. 209-1313 04/20/2021

IQ Digital Lock Box

800.877.2376 www.robern.com

NEW INSTALLATION: PORTRAY / R3 / UPLIFT TECH

NOTE: Remove door from cabinets before beginning.

NOTE: For existing installations, proceed to sections EXISTING RECESSED INSTALLATION (p. 8) or EXISTING SURFACE

INSTALLATION (p. 9).

1. Using the key provided, open the digital lock box and remove the hardware bag.

2. Position and insert mounting blocks into each side of the cabinet at your preferred height and secure with two screws [203-1493] in

each mounting block.

NOTE: Arrows on mounting blocks should be pointed toward back of cabinet box.

5Part no. 209-1313 04/20/2021

IQ Digital Lock Box

800.877.2376 www.robern.com

3. Insert lock box shelf into cabinet slightly above the mounting blocks. Gently press the shelf against the back of the cabinet box and

then slide down until the shelf engages with the mounting blocks.

4. Insert the four locking pins [211-1328] provided, two pins per side.

NOTE: Proceed to nal section, FINISH THE INSTALLATION (p. 10).

NEW INSTALLATION: PORTRAY / R3 / UPLIFT TECH

6Part no. 209-1313 04/20/2021

IQ Digital Lock Box

800.877.2376 www.robern.com

NEW INSTALLATION: PL / M / PC / DC / AC / YC

NOTE: Remove door from cabinets before beginning.

NOTE: For existing installations, proceed to sections EXISTING RECESSED INSTALLATION (p. 8) or EXISTING SURFACE

INSTALLATION (p. 9).

1. Using the key provided, open the digital lock box and remove the hardware bag.

2. R

emove two of the four screws from each

side of the lock box shelf according to your cabinet depth.

D6 /D8

D6 / D8

7Part no. 209-1313 04/20/2021

IQ Digital Lock Box

800.877.2376 www.robern.com

NEW INSTALLATION: PL / M / PC / DC / AC / YC

3. Inse

rt lock box shelf into cabinet at your preferred

height aligning it to the shelf pin holes in the cabinet box.

4. Attach the lock box shelf to the cabinet box using the four #6 x 3/4" screws [SS125] provided.

NOTE: Proceed to nal section, FINISH THE INSTALLATION (p. 10).

3D6 / D8D4

D4 D6 / D8

4a 4b

8Part no. 209-1313 04/20/2021

IQ Digital Lock Box

800.877.2376 www.robern.com

NOTE: For cabinets with electrical options, turn breaker o before beginning.

NOTE: Remove door from cabinets before beginning.

1. Remove four mounting screws from the cabinet box and save for reinstallation of cabinet.

2. Partially remove the cabinet from the rough opening until the required shelf holes are accessible.

NOTE: Proceed to previous section, NEW INSTALLATION: PL / M / PC / DC / AC / YC (p. 6).

EXISTING RECESSED INSTALLATION

2D4

D6 / D8

9Part no. 209-1313 04/20/2021

IQ Digital Lock Box

800.877.2376 www.robern.com

NOTE: For cabinets with electrical options, turn breaker o before beginning.

NOTE: Remove door from cabinets before beginning.

1. Remove four screws holding each side kit to the cabinet box and save for side kit reinstallation.

2. Remove side kits and set aside in a safe location.

NOTE: Proceed to previous section, NEW INSTALLATION: PL / M / PC / DC / AC / YC (p. 6).

EXISTING SURFACE INSTALLATION

10 Part no. 209-1313 04/20/2021

IQ Digital Lock Box

800.877.2376 www.robern.com

FINISH THE INSTALLATION

1. Once the shelf is secured, insert the lock box. If your shelf is wider than the lock box, adjust the lock box to your desired position,

side to side, within the cabinet.

2. Secure the lock box into the shelf using the four #10 x 3/8" screws [203-1492] provided.

3. Proceed according to Cabinet's Installation Instructions.

NOTE: For existing installations, re-mount the recessed cabinet or reinstall all side kits removed.

4. For setup and activation of the lock box, refer to the Quick Start Guide [217-1382].

11 Part no. 209-1313 04/20/2021

IQ Digital Lock Box

800.877.2376 www.robern.com

USE AND MAINTENANCE

CLEANING

Use only a damp cloth to clean. Ammonia or vinegar-based cleaners can damage mirrors.

A 50/50 solution of water and isopropyl alcohol is recommended for cleaning the mirrors.

When cleaning, spray the cloth, not the mirror or surround surfaces. Do not use abrasive cleansers on any part of the cabinet.

Please refer to the IQ Digital Lock Box Quick Start Guide [217-1382] for setup and use instructions.

When ordering replacement keys, have the Serial Number and Security Registration Code available.

This information can be found on the Registration Card and on the label on the rear of the Digital Lock Box.

NOTE: It is strongly recommended that the Registration Card be kept in a safe place for future reference.

No Ammonia

Sans Ammoniac

Sin Amoniaco

No Vinegar

Sans Vinaigre

Sin Vinagre

Limited Warranty One Year Term

Robern warrants to the original purchaser that, it will, at its election repair, replace, or make appropriate adjustment to products made

by this company shown to have signicant defects in material or workmanship which are reported to Robern in writing within one (1)

year from the date of delivery. Robern is not responsible for installation costs. The warranty is void in the event the product is damaged

in transit, or if damage or failure is caused by abuse, misuse, abnormal usage, faulty installation, damage in an accident, improper

maintenance, or any repairs other than those authorized by Robern. At the expiration of the one year warranty period, Robern shall be

under no further obligation under any warranty, expressed or implied, including the implied warranty of merchantability. Robern shall

not be liable for any consequential damages arising out of or in connection with the use or performance of its products. Some states

do not allow limitations on how long an implied warranty lasts or do not allow the exclusion or limitation of incidental or consequential

damages, so the above limitation or exclusion may not apply to you. Any liability against Robern under any implied warranty, including

the warranty of merchantability, is expressly limited to the terms of this warranty. Permission to return any merchandise under this

warranty must be authorized by Robern and returned prepaid by the purchaser. Claims under this warranty should be sent directly to

your dealer.

WARRANTY

12 Part no. 209-1313 04/20/2021

IQ Digital Lock Box

800.877.2376 www.robern.com

RF Exposure Statement

This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be

installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

This equipment meets the exemption from the routine evaluation limits in section 2.5 of RSS-102. It should be installed and operated

with a minimum distance of 20cm between the radiator and any part of your body.

FCC Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to wh ich the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modications to this unit not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Industry Canada Statement

This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence

exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may cause undesired operation of the device.

COMPLIANCE

No. de pièce / Pieza n.° 209-1313 04/20/2021

IQ Boîte de Verrouillage Numérique / IQ Caja de Cerradura Digital

800.877.2376 www.robern.com

Outils nécessaires - 2

Pièces - 2

Notes - 3

Dimensions - 3

Nouvelle installation: Portray / R3 / Uplift Tech - 4

Nouvelle installation: PL / M / PC / DC / AC / YC - 6

Installation encastrée existante - 8

Installation de surface existante - 9

Achever l’installation - 10

Nettoyage - 11

Garantie - 11

Utilisation et entretien - 12

Conformité - 12

Cette ﬁche d’instructions donne des informations sur la

manière d’installer un boîtier verrouillé et une étagère dans

diérentes situations. Ce kit convient à diérentes tailles

d’armoires. Lisez les instructions relatives à l’installation du

boîtier verrouillé et de l’étagère. Armoire vendue séparément.

Conservez ces instructions pour pouvoir vous y reporter et

les utiliser ultérieurement. Une mauvaise installation annule

la garantie. Avant l’installation, inspectez soigneusement

le boîtier, l’étagère et le matériel pour vériﬁer qu’ils ne sont

pas endommagés. Les produits installés ne peuvent pas être

retournés.

Si vous rencontrez des problèmes avec votre boîte verrouillée,

contactez votre revendeur ou Robern directement.

Garantie limitée — Durée d’un an

TABLE DES MATIÈRES

INFORMATIONS GÉNÉRALES

Herramientas necesarias - 2

Piezas - 2

Notas - 3

Dimensiones - 3

Nuevo montaje: Portray / R3 / Uplift Tech - 4

Nuevo montaje: PL / M / PC / DC / AC / YC - 6

Montaje en hueco existente - 8

Montaje sobre superﬁcie existente - 9

Finalización del montaje - 10

Limpieza - 11

Garantía - 11

Uso y mantenimiento - 12

Conformidad - 12

CONTENIDO

INFORMACIÓN GENERAL

BOÎTE VERROUILLÉE NUMÉRIQUE IQ™

Instructions d’installation

Instructions de sécurité importantes - Conservez ces instructions

CAJA DE SEGURIDAD DIGITAL IQ™

Instrucciones de montaje

Instrucciones importantes de seguridad - Guarde estas instrucciones

Esta hoja de instrucciones contiene información sobre cómo

montar una caja de seguridad y una estantería para diferentes

utilidades. El kit de este producto se adapta a armarios de

diferentes tamaños. Lea las instrucciones especíﬁcas sobre

cómo debe montar su caja de seguridad y estantería. El

armario se vende por separado.

Guarde estas instrucciones para consultarlas en el futuro

según sea necesario. Un montaje incorrecto anulará la

garantía del producto. Antes de iniciar el montaje, inspeccione

cuidadosamente la caja de seguridad, la estantería y los

componentes para asegurarse de que no están dañados. No se

pueden devolver aquellos productos que ya se hayan montado.

Si tiene cualquier problema con su caja de seguridad, póngase

en contacto con su distribuidor o contacte con Robern

directamente.

Garantía limitada — Plazo de un año

Uplift Tech 24

Uplift Tech 30, 36, 48*

(*Ne peut être installé que sur le

côté droit de la colonne électrique)

(*Solo se puede instalar en el lado

derecho de la columna eléctrica)

Portray 16, 20, 24

PL Series 16, 20, 24

Proles 16, 20, 24

MC Series 16, 20, 24

DC Series 16, 20, 24

AiO 24, Vitality 24

R3 Series 20, 24

No. de pièce / Pieza n.° 209-1313 04/20/2021

IQ Boîte de Verrouillage Numérique / IQ Caja de Cerradura Digital

800.877.2376 www.robern.com

OUTILS NÉCESSAIRES

PIÈCES

*En fonction de l’installation, toutes les pièces peuvent ne pas être utilisées.

*Según el montaje, no será necesario utilizar todas las piezas.

[217-1382]

Guide de démarrage rapide /

Guía de inicio rápido

Carte d’enregistrement /

Tarjeta de registro

Étagère de la boîte verrouillée /

Estantería de la caja de seguridad

[211-1331]

Boîte numérique verrouillée /

Caja de seguridad digital

[216-1192]

Sac avec composants de montage /

Bolsa con componentes de montaje*

[211-1325]

(2) Bloc de montage /

Estructura de montaje

[211-1328]

(4) Goupille de

verrouillage /

Topes de

seguridad

[203-1492]

(4) #10 x 3/8"

Vis / Tornillo

[203-1493]

(4) #6 x 3/8"

Vis / Tornillo

[SS125]

(4) #6 x 3/4"

Vis / Tornillo

[216-1193]

Kit de démarrage rapide /

Bolsa con materiales básicos

[203-1510]

(2) Clé de la boîte verrouillée /

Llave de la caja de seguridad

HERRAMIENTAS NECESARIAS

PIEZAS

US E R

S E T U P

G U I D E

™

DIGITAL

LOC K BOX

™

DIGITAL LO C K B OX

No. de pièce / Pieza n.° 209-1313 04/20/2021

IQ Boîte de Verrouillage Numérique / IQ Caja de Cerradura Digital

800.877.2376 www.robern.com

ATTENTION ! Pour réduire le risque de décharge

électrique, coupez le courant avant de l’installer dans

une armoire électrique.

NOTES

DIMENSIONS

228.6

133.4

5-1/4"

2-7/16"

238.3

9-3/8"

(238mm)

2-7/16"

(62mm)

5-1/4"

(133mm)

(229mm)

NOTAS

¡ADVERTENCIA! Para reducir el riesgo de un choque

eléctrico, desconecte la alimentación eléctrica antes de

montar el accesorio en un armario con corriente.

DIMENSIONES

No. de pièce / Pieza n.° 209-1313 04/20/2021

IQ Boîte de Verrouillage Numérique / IQ Caja de Cerradura Digital

800.877.2376 www.robern.com

REMARQUE : Retirez la porte des armoires avant de commencer.

REMARQUE: Pour les installations existantes, passez aux

sections INSTALLATION ENCASTRÉE EXISTANTE (p. 8) ou

INSTALLATION DE SURFACE EXISTANTE (p. 9).

1. Ouvrez le boîtier de la serrure numérique à l’aide de la clé fournie

et retirez le sachet de matériel.

2. Positionnez et insérez les blocs de montage dans chaque côté du

meuble à votre hauteur préférée et xez-les avec deux vis

[203-1493] dans chaque bloc de montage.

REMARQUE : Les èches sur les blocs de montage doivent être

dirigées vers l’arrière du boîtier du meuble.

NOUVELLE INSTALLATION:

PORTRAY / R3 / UPLIFT TECH

NUEVO MONTAJE:

PORTRAY / R3 / UPLIFT TECH

NOTA: Extraiga las puertas de los armarios antes de iniciar el

proceso.

NOTA: Para instalaciones existentes, proceda a las secciones

MONTAJE EN HUECO EXISTENTE (pág. 8) o MONTAJE

SOBRE SUPERFICIE EXISTENTE (pág. 9).

1. Con la llave suministrada, abra la caja de seguridad digital y

extraiga la bolsa con los accesorios de montaje.

2. Coloque e introduzca las estructuras de montaje dentro de cada

uno de los lados del armario a la altura que desee y fíjelas con

dos tornillos [203-1493] que deberá introducir en cada una de las

estructuras de montaje.

NOTA: Las echas dibujadas sobre las estructuras de montaje

deberán apuntar hacia la parte posterior de la caja del armario.

2a 2b

No. de pièce / Pieza n.° 209-1313 04/20/2021

IQ Boîte de Verrouillage Numérique / IQ Caja de Cerradura Digital

800.877.2376 www.robern.com

3. Insérez la tablette du boîtier de la serrure dans l’armoire, juste au-

dessus des blocs de montage. Appuyez doucement sur la tablette

contre l’arrière du boîtier du coret, puis faites-la glisser vers le bas

jusqu’à ce qu’elle s’engage dans les blocs de montage.

4 Insérez les quatre goupilles de verrouillage [211-1328] fournies,

deux goupilles pour chaque côté.

REMARQUE: Passez à la dernière section, ACHEVER

L’INSTALLATION (p. 10).

NOUVELLE INSTALLATION:

PORTRAY / R3 / UPLIFT TECH

NUEVO MONTAJE:

PORTRAY / R3 / UPLIFT TECH

3. Introduzca la estantería de la caja de seguridad en el armario

y ligeramente por encima de las estructuras montaje. Empuje con

cuidado la estantería hacia la parte posterior de la caja del armario

y luego arrástrela hasta que la estantería quede encajada en las

estructuras de montaje.

4 Introduzca los cuatro topes de seguridad [211-1328] que se

incluyen, dos a cada lado.

NOTA: Continúe con la sección nal, FINALIZACIÓN DEL

MONTAJE (pág. 10).

No. de pièce / Pieza n.° 209-1313 04/20/2021

IQ Boîte de Verrouillage Numérique / IQ Caja de Cerradura Digital

800.877.2376 www.robern.com

NOUVELLE INSTALLATION:

PL / M / PC / DC / AC / YC

REMARQUE : Retirez la porte des armoires avant de commencer.

1. Ouvrez le boîtier de la serrure numérique à l’aide de la clé

fournie et retirez le sachet de matériel.

2. Retirez deux des quatre vis de chaque côté de la tablette du

boîtier de la serrure, en fonction de la profondeur de votre armoire.

NUEVO MONTAJE:

PL / M / PC / DC / AC / YC

NOTA: Retirez la porte des armoires avant de commencer.

1. Con la llave suministrada, abra la caja de seguridad digital y

extraiga la bolsa con los accesorios de montaje.

2. Extraiga dos de los cuatro tornillos de cada uno de los lados de

la estantería de la caja de seguridad según la profundidad de su

armario.

D6 /D8

D6 / D8

No. de pièce / Pieza n.° 209-1313 04/20/2021

IQ Boîte de Verrouillage Numérique / IQ Caja de Cerradura Digital

800.877.2376 www.robern.com

3. Insérez la tablette du boîtier de serrure dans l’armoire à la

hauteur souhaitée en l’alignant sur les trous des goupilles de la

tablette dans le boîtier de l’armoire.

4. Fixez l’étagère du boîtier verrouillé au boîtier de l’armoire en

utilisant les quatre vis #6 x 3/4 po [SS125] fournies.

REMARQUE: Passez à la dernière section, ACHEVER

L’INSTALLATION (p. 10).

NOUVELLE INSTALLATION:

PL / M / PC / DC / AC / YC

NUEVO MONTAJE:

PL / M / PC / DC / AC / YC

3. Introduzca la estantería de la caja de seguridad en el armario a

la altura que desee, alineándola con los oricios de los topes de la

estantería que se encuentran en la caja del armario.

4. Acople la estantería de la caja de seguridad a la caja

del armario utilizando los cuatro tornillos #6 x 3/4” [SS125]

suministrados.

NOTA: Continúe con la sección nal, FINALIZACIÓN DEL

MONTAJE (pág. 10).

3D6 / D8D4

D4 D6 / D8

4a 4b

No. de pièce / Pieza n.° 209-1313 04/20/2021

IQ Boîte de Verrouillage Numérique / IQ Caja de Cerradura Digital

800.877.2376 www.robern.com

REMARQUE : Pour les armoires avec options électriques, coupez

le disjoncteur avant de commencer.

REMARQUE : Retirez la porte des armoires avant de commencer.

1. Retirez les quatre vis de montage du boîtier de l’armoire et

conservez-les pour la réinstallation de l’armoire.

2. Retirez une partie de l’armoire de l’ouverture brute jusqu’à ce

que les trous d’étagères prévus soient accessibles.

REMARQUE: Passez à la section précédente, NOUVELLE

INSTALLATION: PL / M / PC / DC / AC / YC (p.6).

INSTALLATION ENCASTRÉE

EXISTANTE

MONTAJE EN HUECO EXISTENTE

NOTA: Para aquellos armarios que cuenten con opciones

eléctricas, apague el interruptor principal antes de iniciar el

proceso de montaje.

NOTA: Extraiga las puertas de los armarios antes de iniciar el

proceso.

1. Extraiga los cuatro tornillos de montaje de la caja del armario y

guárdelos para volver a instalar el armario.

2. Extraiga parcialmente el armario de la abertura preliminar

hasta que se pueda acceder correctamente a los oricios de la

estantería.

NOTA: Pase a la sección anterior, NUEVO MONTAJE:

PL / M / PC / DC / AC / YC (pág. 6)

2D4

D6 / D8

La page charge ...

Robern CRAFT Series Manuel utilisateur

Marque: Robern

Modèle: CRAFT Series

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

español: Robern CRAFT Series Manual de usuario

Robern CRAFT Series Manuel utilisateur

Robern CRAFT Series Manuel utilisateur

dans d''autres langues

Documents connexes