User Guide
XTP T VGA
XTP Systems
XTP VGA Transmitter
68-2091-01 Rev. E
01 19
Safety Instructions
Safety Instructions • English
WARNING: This symbol, ,when used on the product, is
intended to alert the user of the presence of uninsulated dangerous
voltage within the product’s enclosure that may present a risk of electric
shock.
ATTENTION: This symbol, , when used on the product, is intended
to alert the user of important operating and maintenance (servicing)
instructions in the literature provided with the equipment.
For information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and
Regulatory Compliance Guide, part number 68-290-01, on the Extron
website, www.extron.com.
Sicherheitsanweisungen • Deutsch
WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer
darauf aufmerksam machen, dass im Inneren des Gehäuses dieses
Produktes gefährliche Spannungen herrschen, die nicht isoliert sind und
die einen elektrischen Schlag verursachen können.
VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in
der im Lieferumfang enthaltenen Dokumentation besonders wichtige
Hinweise zur Bedienung und Wartung (Instandhaltung) geben.
Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,
EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in
den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer
68-290-01) auf der Extron-Website, www.extron.com.
Instrucciones de seguridad • Español
ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,
avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del
producto, lo que puede representar un riesgo de descarga eléctrica.
ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa
al usuario de la presencia de importantes instrucciones de uso y
mantenimiento recogidas en la documentación proporcionada con el
equipo.
Para obtener información sobre directrices de seguridad, cumplimiento
de normativas, compatibilidad electromagnética, accesibilidad y temas
relacionados, consulte la Guía de cumplimiento de normativas y seguridad
de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.
Instructions de sécurité • Français
AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le
produit, signale à l’utilisateur la présence à l’intérieur du boîtier du
produit d’une tension électrique dangereuse susceptible de provoquer
un choc électrique.
ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,
signale à l’utilisateur des instructions d’utilisation ou de maintenance
importantes qui se trouvent dans la documentation fournie avec le
matériel.
Pour en savoir plus sur les règles de sécurité, la conformité à la
réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets
connexes, lisez les informations de sécurité et de conformité Extron, réf.
68-290-01, sur le site Extron, www.extron.com.
Istruzioni di sicurezza • Italiano
AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di tensione non isolata pericolosa
all’interno del contenitore del prodotto che può costituire un rischio di
scosse elettriche.
ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di importanti istruzioni di funzionamento
e manutenzione nella documentazione fornita con l’apparecchio.
Per informazioni su parametri di sicurezza, conformità alle normative,
compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento
alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo
68-290-01, sul sito web di Extron, www.extron.com.
Instrukcje bezpieczeństwa • Polska
OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma na celu
poinformować użytkownika o obecności izolowanego i niebezpiecznego
napięcia wewnątrz obudowy produktu, który może stanowić zagrożenie
porażenia prądem elektrycznym.
UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do
ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji
(obsługi) w literaturze, wyposażone w sprzęt.
Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji
wzajemnej zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne,
zobacz Extron bezpieczeństwa i regulacyjnego zgodności przewodnik, część
numer 68-290-01, na stronie internetowej Extron, www.extron.com.
Инструкция по технике безопасности • Русский
ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан
на продукте, предупреждает пользователя о наличии
неизолированного опасного напряжения внутри корпуса
продукта, которое может привести к поражению электрическим
током.
ВНИМАНИЕ: Данный символ, , если указан на продукте,
предупреждает пользователя о наличии важных инструкций
по эксплуатации и обслуживанию в руководстве,
прилагаемом к данному оборудованию.
Для получения информации о правилах техники безопасности,
соблюдении нормативных требований, электромагнитной
совместимости (ЭМП/ЭДС), возможности доступа и других
вопросах см. руководство по безопасности и соблюдению
нормативных требований Extron на сайте Extron: ,
www.extron.com, номер по каталогу - 68-290-01.
安全说明 • 简体中文
警告： 产品上的这个标志意在警告用户该产品机壳内有暴露的危险 电压，
有触电危险。
注意： 产品上的这个标志意在提示用户设备随附的用户手册中有
重要的操作和维护(维修）说明。
关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍
使用的特性等相关内容，敬请访问 Extron 网站 , www.extron.com，参见
Extron 安全规范指南，产品编号 68-290-01
。
안전 지침 • 한국어
경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는
접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을
경고합니다.
주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와
있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.
안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에
대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및
규제 준수 안내서, 68-290-01 조항을 참조하십시오.
安全記事 • 繁體中文
警告: 若產品上使用此符號，是為了提醒使用者，產品機殼內存在著
可能會導致觸電之風險的未絕緣危險電壓。
注意 若產品上使用此符號，是為了提醒使用者，設備隨附的用戶手冊中有
重要的操作和維護（維修）説明。
有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關主題的詳細資
訊，請瀏覽 Extron 網站：www.extron.com，然後參閱《Extron 安全性與法規
遵守手冊》，準則編號 68-290-01。
安全上のご注意 • 日本語
警告: この記号 が製品上に表示されている場合は、筐体内に絶縁されて
いない高電圧が流れ、感電の危険があることを示しています。
注意:この記号 が製品上に表示されている場合は、本機の取扱説明書に
記載されている重要な操作と保守(整備)の指示についてユーザーの注意
を喚起するものです。
安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目に
つ い て は 、エ ク スト ロ ン の ウ ェブ サ イト www.extron.com よ り 『 Extron Safety
and Regulatory Compliance Guide』 ( P/N 68-290-01) をご覧ください。
Copyright
© 2014-2019
Extron Electronics. All rights reserved. www.extron.com
Trademarks
All trademarks mentioned in this guide are the properties of their respective owners.
The following registered trademarks (
®
), registered service marks (
SM
), and trademarks (
TM
) are the property of RGBSystems, Inc. or
ExtronElectronics (see the current list of trademarks on the Terms of Use page at www.extron.com):
Registered Trademarks
(
®
)
Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Glitch Free, Global
Configurator, GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink,
MediaPort, NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, Show Me, SoundField, SpeedMount, SpeedSwitch,
StudioStation, SystemINTEGRATOR, TeamWork, TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP,
XTPSystems, and ZipClip
Registered Service Mark
(SM)
: S3 Service Support Solutions
Trademarks
(
™
)
AAP, AFL (Accu-RateFrameLock), ADSP(Advanced Digital Sync Processing), Auto-Image, AVEdge, CableCover, CDRS(ClassD
Ripple Suppression), Codec Connect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,
DSPConfigurator, DSVP(Digital Sync Validation Processing), eLink, EQIP, Everlast, FastBite, FOX, FOXBOX, IP Intercom HelpDesk,
MAAP, MicroDigital, Opti-Torque, PendantConnect, ProDSP, QS-FPC(QuickSwitch Front Panel Controller), RoomAgent, Scope-Trigger,
ShareLink, SIS, SimpleInstructionSet, Skew-Free, SpeedNav, Triple-Action Switching, True4K, Vector™ 4K , WebShare, XTRA, and
ZipCaddy
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference. This interference must be corrected at the expense of the user.
ATTENTION: The Twisted Pair Extension technology works with unshielded twisted
pair (UTP) or shielded twisted pair (STP) cables; but to ensure FCC Class A and CE
compliance, STP cables and STP Connectors are required.
For more information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the “Extron Safety and Regulatory
Compliance Guide” on the Extron website.
Conventions Used in this Guide
Notifications
The following notifications are used in this guide:
WARNING: Potential risk of severe injury or death.
AVERTISSEMENT : Risque potentiel de blessure grave ou de mort.
ATTENTION:
• Risk of property damage.
• Risque de dommages matériels.
NOTE: A note draws attention to important information.
TIP: A tip provides a suggestion to make working with the application easier.
Software Commands
Commands are written in the fonts shown here:
^AR Merge Scene,,0p1 scene 1,1 ^B 51 ^W^C.0
[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]
E X! *X1&* X2)* X2#* X2! CE}
NOTE: For commands and examples of computer or device responses used in this
guide, the character “0” is used for the number zero and “O” is the capital letter
“o.”
Computer responses and directory paths that do not have variables are written in the font
shown here:
Reply from 208.132.180.48: bytes=32 times=2ms TTL=32
C:\Program Files\Extron
Variables are written in slanted form as shown here:
ping xxx.xxx.xxx.xxx —t
SOH R Data STX Command ETB ETX
Selectable items, such as menu names, menu options, buttons, tabs, and field names are
written in the font shown here:
From the File menu, select New.
Click the OK button.
Specifications Availability
Product specifications are available on the Extron website, www.extron.com.
Extron Glossary of Terms
A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.
xiXTP T VGA Transmitter • Contents
Contents
Introduction ...............................................1
Guide Overview ................................................... 1
XTP T VGA Transmitter Description ...................... 1
System Compatibility ........................................... 2
Features .............................................................. 2
Installation .................................................4
Rear Panel Connectors ........................................ 4
Connection Details .............................................. 6
Universal Video Wiring ..................................... 6
TP Cable Termination and
Recommendations ......................................... 7
RS-232 and IR Over XTP Communication ....... 9
Power Connection ......................................... 10
Operation .................................................13
Front Panel Features .......................................... 13
EDID .................................................................. 13
Reset Mode ....................................................... 14
SIS Configuration and Control .................15
Host Device Connection .................................... 15
SIS Overview ..................................................... 15
Host-to-Device and Device-to-Host
Communication ............................................ 15
Error Responses ............................................ 15
Using Command and Response Tables
for SIS Commands ....................................... 16
Symbol Definitions ......................................... 16
Command and Response Tables for SIS
Commands ...................................................... 17
Input Commands ........................................... 17
Audio Configuration Commands .................... 17
Picture Adjustment Commands ..................... 18
Preset Commands ......................................... 19
EDID Commands ........................................... 19
Advanced Configuration Commands ............. 20
XTP System Configuration Software ........21
Software Installation........................................... 21
Software Download Center Page ................... 21
Software Product Page .................................. 22
Software Operation............................................ 23
Connections .................................................. 23
Menu Bar ...................................................... 24
Device Settings .............................................. 27
EDID Minder .................................................. 31
Reference Information ............................. 33
Mounting ........................................................... 33
Tabletop Mounting ......................................... 33
Furniture Mounting......................................... 33
Rack Mounting .............................................. 33
XTP T VGA Transmitter • Contents xii
XTP T VGA Transmitter • Introduction 1
Introduction
This section contains general information about this guide and the Extron XTP T VGA
Transmitter. Topics in this section include:
• Guide Overview
• XTP T VGA Transmitter Description
• System Compatibility
• Features
Guide Overview
This guide provides installation, operation, control, and reference information for the
XTP T VGA Transmitter. In this guide, the terms “transmitter” and “XTP T VGA” are used
interchangeably to refer to the XTP T VGA Transmitter.
XTP T VGA Transmitter Description
The Extron XTP T VGA is a universal XTP transmitter that sends multi-format analog video,
audio, control, and Ethernet up to 330 feet (100 meters) over a single shielded twisted pair
(STP) cable. It digitizes all incoming analog formats and applies SD Pro™ processing to
deinterlace 480i and 576i video signals for reliable display on a variety of output devices. To
simplify integration, the XTP transmitter features VGA loop-through for source monitoring. It
also allows Ethernet extension and insertion of bidirectional RS-232 and IR for LAN access
and AV device control at remote locations. The XTP T VGA Transmitter works with
XTP Systems for signal distribution and long-distance transmission to remote endpoints.
It can be powered locally or remotely through an Extron XTP Power Injector or XTP matrix
switcher (see Power Connection on page 10).
To configure and control the XTP T VGA locally, connect a computer to the USB
configuration port and either enter Extron Simple Instruction Set (SIS) commands (see SIS
Configuration and Control on page 15) or use the Extron XTP System Configuration
Software (see XTP System Configuration Software on page 21).
XTP T VGA Transmitter • Introduction 2
The following diagram shows one way the XTP T VGA can be integrated in an XTP
point-to-point application. The transmitter can also be used with an XTP matrix switcher
(see the XTP matrix switcher user guide for more details on matrix applications and
configuration).
Ext
ron
XT
P T VGA
Univ
ersal XTP
T
ransmitter for VGA
POWER
12V
HDMI
--A MAX
R
x G
T
x
RS
-23
2
IR
RL
R
xT
x
-+ -
+
1
2
AUDIO
OFF
ON
AUDIO
S/PDIF
RESET
LAN
SIG
LINK
XTP IN
OVER XTP
OUTPUTS
RELAYS
ACT
L
IN
K
SIG
LINK
XTP IN
POWER
12V
--A MAX
Rx GTx
RS-232
IR
RxTx
AUDIO
LOOP-THRU
UNIVERSAL
XTP T VGA
LAN
SIG LINK
XTP OUT
RESE
T
INPUTS
OVER XTP
Extron
XTP R HDMI
XTP Receiver
Shielded Twisted Pair
Cable
Laptop
Monitor
Display
HDMI
VGA
VGA
Audio
Figure 1. Typical XTP T VGA Point-to-Point Application
System Compatibility
The XTP T VGA is compatible with XTP systems, but the maximum video resolution may be
limited with different XTP devices. See the table below for maximum video resolutions and
refresh rates for various XTP systems.
Output
Non-4K 4K Fiber 4K PLUS
Input
Analog 1920x1200 @ 60 Hz 1920x1200 @ 60 Hz 1920x1200 @ 60 Hz
Non-4K Digital 2048x1080 @ 60 Hz 2048x1080 @ 60 Hz 2048x1080 @ 60 Hz
4K Fiber 2048x1080 @ 60 Hz 4096x2160 @ 24 Hz 4096x2160 @ 24 Hz
4K PLUS 2048x1080 @ 60 Hz 4096x2160 @ 24 Hz 4096x2160 @ 60 Hz
Features
Reliable cable infrastructure — Provides high reliability and maximum performance on an
economical and easily installed cable infrastructure.
Support for Computer-video to 1920x1200, including HDTV 1080p/60 — Maintains
superior image quality at the highest resolutions.
Shielded twisted pair cable compatibility — Optimized for use with common shielded
twisted pair cable types. XTP systems fully support a maximum transmission distance of
330 feet (100 meters) for all compatible resolutions when used with shielded twisted pair
cable. Shielded twisted pair cabling with solid center conductor sizes of 24 AWG or better is
recommended for optimal performance.
Bidirectional RS-232 and IR insertion — Allows a remote display to be controlled without
the need for additional cabling through bidirectional RS-232 control and IR signals inserted
into the XTP output.
XTP T VGA Transmitter • Introduction 3
RGB, HD component video, S-video, and composite video signals support
SD Pro processing — Provides deinterlacing of 480i and 576i signals for compatibility with
HDMI and DVI-equipped displays, without the need for additional scalers.
Digital conversion of analog video and audio input signals — Digitizes analog signals,
ensuring that a reliable, high quality digital video signal is sent to the output destination. The
universal input supports RGB, HD component video, S-video, and composite video signals.
Auto input format detection — Detects the incoming signal format and automatically
converts it to a digital TMDS signal for routing. This feature can reduce the number of
required outputs for an XTP CrossPoint matrix switcher, lowering system cost while
improving manageability.
Universal 15-pin HD input loop-through — Provides a local monitor output, enabling the
input signal to be monitored without the need for a separate distribution amplifier.
EDID Minder — Automatically manages EDID communication between connected devices.
It ensures that all sources power up properly and reliably outputs content for display.
Ethernet extension — Centralized 10/100Base-T Ethernet communication can be
implemented via an Ethernet pass-through port to reduce the amount of independent
network drops required within a system.
Remote power capability — Allows the XTP T VGA to be powered by an XTP matrix
switcher or XTP power injectors to simplify integration.
Audio input gain and attenuation — Allows the level of gain or attenuation to be set,
eliminating noticeable volume differences when switching between sources.
Internal test patterns — Include five test patterns for calibration and setup.
XTP system compatibility — Provides a flexible signal switching and distribution solution
that is completely integrated, ensuring reliable routing of multiple digital and analog formats.
XTP T VGA Transmitter • Installation 4
Installation
This section contains installation procedures for the XTP T VGA and wiring details. Topics in
this section include:
• Rear Panel Connectors
• Connection Details
The XTP T VGA can be placed on a tabletop or mounted in a rack or under a desk (see
Mounting on page 33).
Rear Panel Connectors
POWER
12V
1.0 A MAX
Rx GTx
RS-232
IR
RxTx
AUDIO
LOOP THRU
UNIVERSAL
XTP T VGA
LAN
SIG LINK
XTP OUT
RESET
INPUTS
OVER XTP
ABCDEF
G
A
Universal video connector
B
Analog 15-pin HD loop-through
connector
C
Analog audio input connector
D
RS-232 and IR Over XTP connector
(page 5)
E
XTP output connector (page 5)
F
LAN connector (page 5)
G
Power connector and LED
(page 5)
Figure 2. XTP T VGA Rear Panel Connectors
A
Universal video connector — Connect a video source to the 15-pin HD connector. It
accepts RGBHV, RGsB, RsGsBs, RGBS, RGBcvS, YUVi or YUVp/HDTV, S-video, and
composite video (see Universal Video Wiring on page 6) signals.
B
Analog 15-pin HD loop-through connector — Connect a video display to the
15-pin HD connector for a local monitor display of the universal analog video input.
C
Analog audio input connector — Connect an analog stereo audio source to the
3.5 mm tip-ring-sleeve (TRS) jack.
Tip (+)
Sleeve ( )
Sleeve ( )
Ring (
-
)
Tip (+)
Audio Plugs.eps
RCA Connector
3.5 mm Stereo Plug Connector
(balanced)
Sleeve ( )
Ring (R)
Tip (L)
3.5 mm Stereo Plug Connector
(unbalanced)
Figure 3. Wiring for the Analog Audio Connector
XTP T VGA Transmitter • Installation 5
D
RS-232 Over XTP port — To pass bidirectional serial signals between
XTP-compatible devices, connect a control device to the 5-pole captive
screw connector (see figure 2,
D
on the previous page). The port includes
only the 3 poles labeled “RS-232.”
IR Over XTP port — To transmit and receive IR signals (up to 56 kHz),
connect a control device to the 5-pole captive screw connector (see
figure 2,
D
). This port includes the 2 poles labeled
“IR” and shares the ground pole with the RS-232 port.
NOTE: RS-232 and IR data can be transmitted simultaneously (see RS-232 and IR
Over XTP Communication on page 9 for wiring details).
E
XTP output connector — Connect a twisted pair cable to the RJ-45 connector
labeled “XTP OUT” on the XTP T VGA (see figure 2,
E
on the previous page) and the
XTP input connector on an XTP receiver or XTP matrix switcher to pass all signals (see
TP Cable Termination and Recommendations on page 7). This cable carries the
following signals:
• Digital video
• Digital audio
• Bidirectional RS-232 and IR commands
• Remote power
• Ethernet communication
• System communication
Signal LED indicator — Lights green when the XTP T VGA outputs a
video signal or a test pattern.
Link LED indicator — Lights yellow when XTP devices are connected
and communication is established.
ATTENTION:
• Do not connect this connector to a computer data or telecommunications
network.
• Ne connectez pas ce connecteur à un réseau de données informatiques ou à
un réseau de télécommunications.
• XTP remote power is intended for indoor use only. No part of the network that
uses XTP remote power should be routed outdoors (see Remote power on
page 12).
• XTP à distance est destiné à une utilisation en intérieur seulement. Aucune
partie du réseau qui utilise l’alimentation XTP à distance ne peut être routée en
extérieur (voir Remote power à la page 12).
F
LAN connector — Connect a control device or device to be controlled to the RJ-45
connector labeled “LAN” (see figure 2,
F
on the previous page) for 10/100Base-T
Ethernet communication through this pass-through port. LEDs on the connector
indicate link and activity status.
G
Power connector and LED — Connect the external 12 V, 1.0 A power supply to the
2-pole captive screw connector (see figure 2,
G
on the previous page). For wiring
considerations, see Power Connection on page 10. The Power LED lights to
indicate the device is receiving power.
NOTE: The XTP T VGA can also be powered remotely (see Remote power on
page 12).
IR
Tx Rx G Tx Rx
RS-232
Signa
l
Link
IR
Tx Rx G Tx Rx
RS-232
XTP T VGA Transmitter • Installation 6
Connection Details
Universal Video Wiring
Use the following pin configurations for the 15-pin HD connector.
1
2
3
4
5
51
15 11
610
FunctionPin FunctionPin FunctionPin
Red video
Green video
Blue video
Monitor ID bit
H. sync return
6
7
8
9
10
Red return
Green return
Blue return
Not used
V. sync return
11
12
13
14
15
Monitor ID bit
Monitor ID bit
H. sync
V. sync
Monitor ID bit
Figure 4. 15-Pin HD Connector Pins
Pinout Table for 15-pin HD Connectors
Pin RGBHV RGBS RGsB Component S-video Composite
1 Red Red Red R-Y
2 Green Green Green/Sync Y Luma Video
3 Blue Blue Blue B-Y Chroma
4 No
connection
No
connection
No
connection
5 No
connection
No
connection
No
connection
6 Red return Red return Red return R-Y return
7 Green return Green return Green
return
Y return L return Video return
8 Blue return Blue return Blue return B-Y return C return
9
10 Ground Ground Ground
11 No
connection
No
connection
No
connection
12 EDID/DDC EDID/DDC EDID/DDC
13 H sync C sync
14 V sync
15 EDID/DDC EDID/DDC EDID/DDC
XTP T VGA Transmitter • Installation 7
TP Cable Termination and Recommendations
Use the following pin configurations for twisted pair cables.
12345678
RJ-45
Connector
Inser
t Twisted
Pair Wires
Pins:
Pin
1
2
3
4
5
6
7
8
Wire color
White-green
Green
White-orange
Blue
White-blue
Orange
White-brown
Brown
Wire color
T568A T568B
White-orange
Orange
White-green
Blue
White-blue
Green
White-brown
Brown
TIA/EIA-T568B
Pin Wire Color
1 White-orange
2 Orange
3 White-green
4 Blue
5 White-blue
6 Green
7 White-brown
8 Brown
Figure 5. Twisted Pair Cable Termination
Supported cables
The XTP T VGA is compatible with shielded twisted pair (F/UTP, SF/UTP, and S/FTP) and
unshielded twisted pair (U/UTP) cables.
ATTENTION:
• Do not use Extron UTP23SF-4 Enhanced Skew-Free AV UTP cable or STP201
cable to link the XTP products.
• N’utilisez pas le câble AV Skew-Free UTP version améliorée UTP23SF d’Extron ou
le câble STP201 pour relier les produits XTP.
• To ensure FCC Class A and CE compliance, STP cables and STP connectors are
required.
• Afin de s’assurer de la compatibilité entre FCC Classe A et CE, les câbles STP et
les connecteurs STP sont nécessaires.
XTP T VGA Transmitter • Installation 8
Cable recommendations
Extron recommends using the following practices for XTP communication to achieve full
transmission distances up to 330 feet (100 meters) and reduce transmission errors.
• Use the following Extron XTP DTP 24 SF/UTP cables and connectors for the best
performance:
• XTP DTP 24/1000 Non-Plenum 1000’ (305 m) spool 22-236-03
• XTP DTP 24P/1000 Plenum 1000’ (305 m) spool 22-235-03
• XTP DTP 24 Plug Package of 10 101-005-02
• If not using XTP DTP 24 cable, at a minimum, Extron recommends 24 AWG, solid
conductor, STP cable with a minimum bandwidth of 400 MHz.
• Terminate cables with shielded connectors to the TIA/EIA-T568B standard (see figure 5
on the previous page).
• Limit the use of more than two pass-through points, which may include patch points,
punch down connectors, couplers, and power injectors. If these pass-through points
are required, use shielded couplers and punch down connectors.
NOTE: When using STP cable in bundles or conduits, consider the following:
• Do not exceed 40% fill capacity in conduits.
• Do not comb the cable for the first 20 m, where cables are straightened, aligned,
and secured in tight bundles.
• Loosely place cables and limit the use of tie wraps or hook-and-loop fasteners.
• Separate twisted pair cables from AC power cables.
XTP T VGA Transmitter • Installation 9
RS-232 and IR Over XTP Communication
The RS-232 and IR Over XTP connector is for pass-through transmission of serial signals,
such as projector control signals, and infrared data. To pass bidirectional serial command
signals between XTP-compatible devices, connect a control device to the three poles
(Tx, Rx, and G) under “RS-232” of the 5-pole captive screw connector. To transmit and
receive IR signals, connect a control device to the three poles (G, Tx, and Rx) under “IR.”
The ground (G) pole is shared.
NOTE: RS-232 and IR data can be transmitted or received simultaneously (see figure 6
below for wiring considerations).
Tx/Rx
Pins
RxTx
RS-232
RxTx
TxRx
RxTx
Custom
IR Device
RS-232 Device
G
G
G
IR
Figure 6. Wiring the RS-232 and IR Over XTP Connector
ATTENTION:
• The length of the exposed wires in the stripping process is important.
• La longueur des câbles exposés est importante lorsque l’on entreprend de les
dénuder.
• The ideal length is 3/16 inch (5 mm).
• La longueur idéale est de 5mm (3/16inches).
• Any longer and the exposed wires may touch, causing a short circuit between
them.
• S’ils sont un peu plus longs, les câbles exposés pourraient se toucher et provoquer
un court-circuit.
• Any shorter and the wires can be easily pulled out even if tightly fastened by the
captive screws.
• S’ils sont un peu plus courts, ils peuvent être tirés facilement, même s’ils sont
correctement serrés par les borniers à vis.
XTP T VGA Transmitter • Installation 10
Power Connection
Apply power to the transmitter locally with the provided power supply (if necessary, see
figure 7 for wiring considerations) or remotely (through the XTP connector) with a power
injector or a matrix switcher.
Local power
SECTION A–A
AA
Power Supply
Output Cord
2-Pole Captive Screw
Connector
Ridges
Smooth
Tie
Wrap
3/16”
(5 mm) Max.
Figure 7. Power Wiring
The XTP T VGA can be powered by a local power supply. See the notifications on the next
page for local power considerations.
XTP T VGA Transmitter • Installation 11
WARNING: Electric shock hazard. The two power cord wires must be kept separate
while the power supply is plugged in. Remove power before wiring.
AVERTISSEMENT : Risque de choc électrique grave. Les deux cordons
d’alimentation doivent rester séparés tant que l’alimentation est branchée. Couper
l’alimentation avant de faire les raccordements.
ATTENTION:
• This product is intended for use with a UL Listed power source marked “Class 2”
or “LPS” rated 12 VDC, 1.0 A minimum, 48 VDC (PoE), minimum 0.35 A, or an
Extron UL Listed XTP remote power source. Always use a power supply supplied
by or specified by Extron. Use of an unauthorized power supply voids all regulatory
compliance certification and may cause damage to the supply and the unit.
• Ce produit doit être utilisé avec une source d’alimentation certifiée UL de classe 2
ou LPS avec une tension nominale de 12 Vcc, 1,0 A minimum, 48 Vcc (PoE),
0,35 A minimum, ou une source d’alimentation à distance XTP Extron certifiée UL.
Utilisez toujours une source d’alimentation fournie par Extron. L’utilisation d’une
source d’alimentation non autorisée annule toute conformité réglementaire et peut
endommager la source d’alimentation ainsi que l’unité.
• Unless otherwise stated, the AC/DC adapters are not suitable for use in air handling
spaces or in wall cavities. The installation must always be in accordance with the
applicable provisions of National Electrical Code ANSI/NFPA 70, article 725 and
the Canadian Electrical Code part 1, section 16. The power supply shall not be
permanently fixed to a building structure or similar structure.
• Sauf mention contraire, les adaptateurs CA/CC ne conviennent pas à une utilisation
dans les espaces d’aération ou dans les cavités murales. Cette installation doit
toujours être conforme aux dispositions applicables du Code américain de
l’électricité (National Electrical Code) ANSI/NFPA 70, article 725, et du Code
canadien de l’électricité, partie 1, section 16. La source d’alimentation ne devra pas
être fixée de façon permanente à la structure de bâtiment ou à d’autres structures
similaires.
• Power supply voltage polarity is critical. Incorrect voltage polarity can damage the
power supply and the unit. The ridges on the side of the cord identify the power
cord negative lead.
• La polarité de la source d’alimentation est primordiale. Une polarité incorrecte
pourrait endommager la source d’alimentation et l’unité. Les stries sur le côté du
cordon permettent de repérer le pôle négatif du cordon d’alimentation.
• The length of the exposed (stripped) copper wires is important. The ideal length is
3/16 inch (5 mm).
• La longueur des câbles exposés est importante lorsque l’on entreprend de les
dénuder. La longueur idéale est de 5 mm (3/16 inch).
TIP: Do not tin the stripped power supply leads. Tinned wires are not as secure in the
captive screw connectors and could be pulled out.
XTP T VGA Transmitter • Installation 12
Remote power
The XTP T VGA can be powered remotely through an XTP Power Injector or through an XTP
matrix switcher.
ATTENTION:
• XTP remote power is intended for indoor use only. No part of the network that uses
XTP remote power should be routed outdoors.
• XTP à distance est destiné à une utilisation en intérieur seulement. Aucune partie
du réseau qui utilise l’alimentation XTP à distance ne peut être routée en extérieur.
Power injector
To power the XTP T VGA remotely with an XTP Power Injector, power a connected receiver
locally (see Local power on page 10) and connect an XTP Power Injector to the XTP
cable run along the XTP ports (see the XTP Power Injector User Guide at www.extron.com
for more installation information).
POWER
12V
--A MAX
Rx GTx
RS-232
IR
RxTx
AUDIO
LOOP-THRU
UNIVERSAL
XTP T VGA
LAN
SIG LINK
XTP OUT
RESET
INPUTS
OVER XTP
LAN
SIG LINK
XTP IN
POWER
12V
HDMI
1A MAX
Rx GTx
RS-232 IR
RxTx
−+−+
LR
1
2
OVER XTP
AUDIO
OFF
ON
S/PDIF
RESET
XTP R HDMI
RELAYS
OUTPUTS
AUDIO
XTP
PWR
XTP PWR
100-240V
50/60 Hz
---A MAX
Power
Extron
XTP R HDMI
XTP Receiver
Extron
XTP PI 100
XTP Power
Injector
Shielded Twisted
Pair Cable
Remote
Power
12V Local Power
Supply
Ext
ron
XT
P T VGA
U
niversal XTP Transmitter for VGA
Figure 8. Typical Point-to-Point Application with Remote Power
NOTE: The power injector provides remote power up to 330 feet with a shielded twisted
pair cable with 24 AWG wire.
XTP matrix switcher
XTP matrix switchers have a fixed amount of power available to provide remote power to
connected XTP devices (see the appropriate XTP matrix switcher user guide at
www.extron.com for more details). To manage available power from the XTP matrix
switcher, use the XTP System Configuration Software with the matrix switcher.
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
dans d''autres langues
- English: Extron XTP T VGA User manual
Documents connexes
-
Extron XTP T FB 202 4K Manuel utilisateur
-
-
-
-
-
Extron XTP T USW 103 4K Manuel utilisateur
-
-
-
-