Whirlpool WGD94HEXW1 Le manuel du propriétaire

Marque: Whirlpool

Modèle: WGD94HEXW1

Catégorie: Sèche-linge électriques

Taper: Le manuel du propriétaire

CareGui

ELECTRONICDRYER

SI_CHEUSEI_LECTRONIQUE

Para obtener acceso

al Manual de uso y

cuidado en espaffol, o para

obtener informaci6n adicional

acerca de su producto, visite:

www.whirl pool.com.

If you have any problems or questions, visit us at www.whirlpool.com

Pour tout probl_me ou question, consulter www.whirlpoolappEances.ca

W10305730B

W10305731B =SP

ELECTRONICDRYER

TABLEOFCONTENTS

DRYER SAFETY .................................................................................... 2

ACCESSORIES...................................................................................... 4

CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW ............................ 5

CONTROL PANELAND FEATURES........................................................ 6

CYCLEGUIDE ....................................................................................... 8

USING YOUR DRYER.......................................................................... 10

CYCLESTATUSINDICATORS ............................................................... 12

ADDITIONAL FEATURES ................................................................... 12

DRYER CARE...................................................................................... 13

TROUBLESHOOTING ......................................................................... 15

WARRANTY ....................................................................................... 18

ASSISTANCE OR SERVICE..................................................... Back Cover

SI CHEUSEI LECTRONIQUE

Tablede Ma_res

SECURITE DE LA SECHEUSE............................................................... 19

ACCESSOIRES.................................................................................... 21

VITRIFICATION D'UNE CIRCULATION D'AIR AD¢QUATE

POUR LESYSTEME D'¢VACUATION ................................................... 22

TABLEAU DE COMMANDE ET CARACT¢RISTIQUES ........................... 23

GUIDE DES PROGRAMMES ............................................................... 26

UTILISATION DE LASt_CHEUSE.......................................................... 28

TEMOINS LUMINEUX DE PROGRAMME ........................................... 30

CARACTI_RISTIQUESSUPPLt_MENTAIRES .......................................... 31

ENTRETIEN DE LA SECHEUSE............................................................ 32

D¢PANNAGE ..................................................................................... 34

GARANTIE ......................................................................................... 38

ASSISTANCE OU SERVICE........................................ Couverture arri&re

DR %R SAFETY

Your safety and the safety of others are very important,

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't

follow instructions,

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

" ==Risk of Fire"

- Clothes dryer installation must be performed by a qualified installer.

- Install the clothes dryer according to the manufacturer's instructions and local codes.

- Do not install a clothes dryer with flexible plastic venting materials or flexible metal

(foil type) duct. If flexible metal duct is installed, it must be of a specific type identified

by the appliance manufacturer as suitable for use with clothes dryers. Flexible venting

materials are known to collapse, be easily crushed, and trap lint. These conditions will

obstruct clothes dryer airflow and increase the risk of fire.

- To reduce the risk of severe injury or death, follow all installation instructions.

- Save these instructions.

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

In the State of Massachusetts, the following installation instructions apply:

[] Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by

the State of Massachusetts.

[] If using a ball valve, it shall be a T-handle type.

[] A flexible gas connector, when used, must not exceed 3 feet.

WARNING: For your safety, the information in this manual must be followed to minimize

the risk of fire or explosion, or to prevent property damage, personal injury, or death.

- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this

or any other appliance.

- WHAT TO DO IF YOU SMELL GAS:

® Do not try to light any appliance.

• Do not touch any electrical switch; do not use any phone in your building.

® Clear the room, building, or area of all occupants.

• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

® If you cannot reach your gas supplier, call the fire department.

- installation and service must be performed by a qualified installer, service agency, or

the gas supplier.

WARNING: Gas leaks cannot always be detected by smell.

Gas suppliers recommend that you use a gas detector approved by UL or CSA.

For more information, contact your gas supplier.

If a gas leak is detected, follow the "What to do if you smell gas" instructions.

iMPORTANT: The gas installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas

Code, ANSI Z223.1iNFPA 54.

The dryer must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National

Electrical Code, ANSl/NFPA 70.

iMPORTANT SAFETY iNSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the dryer, follow basic precautions,

including the following:

[] Read all instructions before using the dryer.

[] Do not place items exposed to cooking oils in your dryer.

Items contaminated with cooking oils may contribute to

a chemical reaction that could cause a load to catch fire.

[] Do not dry articles that have been previously cleaned in,

washed in, soaked in, or spotted with gasoline, dry-

cleaning solvents, or other flammable or explosive

substances as they give off vapors that could ignite or

explode.

[] Do not allow children to play on or in the dryer. Close

supervision of children is necessary when the dryer is

used near children.

[] Before the dryer is removed from service or discarded,

remove the door to the drying compartment.

[] Do not reach into the dryer if the drum is moving.

[] Do not install or store the dryer where it will be exposed

to the weather.

[] Do not tamper with controls.

[] Do not repair or replace any part of the dryer or attempt

any servicing unless specifically recommended in this

Use and Care Guide or in published user-repair

instructions that you understand and have the skills to

carry out.

[] Do not use fabric softeners or products to eliminate static

unless recommended by the manufacturer of the fabric

softener or product.

[] Do not use heat to dry articles containing foam rubber or

similarly textured rubber-like materials.

[] Clean lint screen before or after each load.

[] Keep area around the exhaust opening and adjacent

surrounding areas free from the accumulation of lint, dust,

and dirt.

[] The interior of the dryer and exhaust vent should be

cleaned periodically by qualified service personnel.

[] See "Electrical Requirements" located in the installation

instructions for grounding instructions.

SAVE THESE iNSTRUCTIONS

Enhance your new washer and dryer with the following genuine

Whirlpool accessories. For more information on options and

ordering, call 1-800-901-2042, or visit us at:

www.whirlpool.com/accessories. In Canada, call

1-800-807-6777 or visit us at www. whirlpoolparts.ca

15" Pedestal

Color matched pedestals raise

the washer and dryer to a more

comfortable working height.

The large drawer provides

convenient storage.

Available in matching colors.

Stack Kit

If space is at a premium,

the stack kit allows the dryer

to be installed on top of

the washer.

Worksurface

The worksurface bridges

the washer and dryer, and

provides a convenient working

and storage area.

CHECK YOUR $YSTBI FOR GOOD AIR FLOW

Fire Hazard

Use a heavy metal vent,

Do not use a plastic vent.

Do not use a metal foil vent,

Failure to follow these instructions can result in death

or fire.

Good air flow

Along with heat, dryers require good air flow to efficiently

dry laundry. Proper venting will reduce your drying times

and improve your energy savings. See Installation

instructions.

The venting system attached to the dryer plays a big role in

good air flow.

Service calls caused by improper venting are not covered

by the warranty and will be paid by the customer, regardless

of who installed the dryer.

Maintain good air flow by:

[] Cleaning your lint screen before each load.

[] Replace plastic or foil vent material

with 4" (102 mm) diameter heavy, rigid

vent material.

[] Use the shortest length of vent possible.

[] Use no more than four 90° elbows in a vent system;

each bend and curve reduces air flow.

[]

Remove lint and debris from the exhaust hood.

Remove lint from the entire length of the vent system

at least every 2 years. When cleaning is complete, be

sure to follow the Installation Instructions supplied with

your dryer for final product check.

Clear away items from the front the dryer.

Use Auto cycles for better fabric care and energy savings

Use the Auto Cycles to provide the most energy savings and enhanced fabric care from the dryer. During Automatic Cycles,

drying air temperature and moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the dryer

shuts off when the load reaches the selected dryness. Use the NORMAL DRY dryness level to provide optimal energy savings.

With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to

over-drying. Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.

Tips for getting the best performance from your steam dryer

[] Results may vary depending on fabric. 100% cotton []

garments with wrinkle-free finish may yield better results

than those without. 100% cotton items may require

additional touching up after the Steam Cycle. []

Use of fabric softener sheet is not recommended with

Steam Cycles. It may cause temporary staining on clothes.

It is not recommended to use Steam Cycles for items that

have been starched. Wash any starched or new garments

prior to using a Steam Cycle.

The Quick Refresh Cycle is best for smoothing out wrinkles

and reducing odors from loads consisting of one to four

dry items of wrinkle-free cotton, cotton-polyester blend,

common knits, and synthetic garments.

[]

The Enhanced Touch Up Cycle is best for smoothing out

wrinkles from clothes that have been left in the dryer too

long. For best results, do not overload the dryer.

On some models, the Quick Refresh Cycle time is set for 15

minutes and is not adjustable. Under certain environmental

or installation conditions, you may experience under drying

with the Quick Refresh Cycle. Select Enhanced Touch Up

Cycle which can be customized to select High Temperature

and/or additional cycle time by pressing the Timed Dry

Adjust More Time button.

CONTROL P&NEL _ND FEATURES

Not all features and cycles are available on all models.

11=cycle models

T NORMAL _ T

CASUAL BULKY ITEMS

DELICATE JEANS

Cycles

POWER HEAVY START/PAUSE

Static Reduce

0 TOWELS

Menual

Cycles_\_ _g_ Ho,d,oSTART

TIMEOORY" "C_D

Wrinkle Shield

QUICK DRY I QUICK REFRESH

Steam Cycles [ Select hum bet of Garments

with Steam

6_ EcoBoost Damp Dry Drum Light Control Lock

I 1

8-cycle models

POWER

CASUAL

DELICATE

Cycles

NORMAL

Manual

TIMED

QUICK DRY

QUICK REFRESH

BULKY ITEMS

HEAVY DUTY

START/PAUSE

Hold to START

l_ EcoBoost Wrinkle Doum Light Control Lock

Shield pressand hold

for 3 seconds

POWER BUTTON

Press to turn the dryer on and off.

Press to stop/cancel a cycle at any time.

CYCLE CONTROL KNOB

Use your dryer's cycle control knob to select available

cycles on your dryer. Turn the knob to select a cycle

for your laundry load. See Cycle Guide for detailed

descriptions of cycles.

START/PAUSE BUTTON

Press and hold to start a cycle, or press once while a

cycle is in process to pause it.

TIMED DRY ADJUST for MANUAL CYCLES

Use these buttons with Manual Cycles to increase or

decrease the length of a Timed Dry or Quick Dry cycle.

LED DISPLAY AND SETTINGS BUTTONS

When you select a cycle, its default settings will light

up and the Estimated Time Remaining (for Auto Cycles)

or actual time remaining (for Manual Cycles) will be

displayed.

Use the buttons along the bottom of the display to adjust

settings. See Cycle Guide for available settings on each

cycle. Not all settings are available with all cycles.

Cycle Status Lights

The indicator bar at the top of the display will let you

know what stage the drying cycle is in process.

For more information on each stage, see "Cycle Status

indicators".

Temperature

When using Manual Cycles or Enhanced Touch Up, you

may select a dry temperature based on the type of load

you are drying. Use the warmest setting safe for the

garments in the load. Follow garment label instructions.

NOTE: Eco Auto Cycles use a preset temperature that

is not adjustable.

Dryness Level

You may adjust the Dryness Level on Eco Auto Cycles,

if desired.

NOTE: Dryness Level is for use with Eco Auto

Cycles only.

Garment # (on some models)

Use this button with the Quick Refresh cycle to select

the number of garments being refreshed. When START

is pressed, the cycle time will be displayed. See Cycle

Guide for more information.

Cycle Signal

Use this button to turn the buzzer indicating the

end of a drying cycle on or off, or to adjust the

volume of the buzzer.

NOTE: You may also turn off the tones that sound

when a button is pressed. Press and hold the

EcoBoost button for about one second to turn

button sounds on or off.

OPTION BUTTONS

Use these buttons to select available options for your

dryer. Not all cycles and options are available on all

models.

EcoBoost

Press to activate the EcoBoost option. The EcoBoost

option allows you to increase your energy savings by

using a slightly lower heat level. This may increase dry

times somewhat.

NOTE: Press and hold the EcoBoost button for about

one second to turn button sounds on or off.

Damp Dry Signal

Press to hear the Damp Dry Signal when the load is

damp, but not completely dry. This will allow you to

take clothes out of the load that do not need to dry

completely. This option is available on Heavy Duty,

Normal, Jeans, Bulky items, Casual, and Delicate

cycles.

Drum Light

Press to turn the LED drum light on or off. The light

will also turn on when the door is open, and turn off

automatically after about 5 minutes.

Control Lock

Use this button to lock the controls of the dryer

and avoid an accidental change in cycle options or

preferences during a drying cycle.

WRINKLE SHIELD/WRINKLE SHIELD with Steam

(on some models)

If you will be unable to remove a load immediately,

press Wrinkle Shield to add up to 120 minutes of periodic

tumbling to help reduce wrinkling. On models with Wrinkle

Shield with Steam, a short steam cycle is added after 60

minutes to help smooth out wrinkles.

NOTE: On models with Wrinkle Shield with Steam. you

may turn off Steam by pressing and holding the Wrinkle

Shield button until - St appears in the display. The dryer

will remember this setting for future loads. To turn Steam

back on, press and hold the Wrinkle Shield button again

for several seconds.

STATIC REDUCE {on some models)

Press to add the Static Reduce option to select Auto

cycles. The dryer will automatically tumble, pause, and

introduce a small amount of moisture into the load to help

reduce static. This option adds approximately 8 minutes

to the total cycle time.

CYCLE GUIDE AUTO CYCLES

Settings and options shown in bold are default settings for that cycle.

Not all features and cycles are available on all models.

Not all settings and options are available on each cycle.

Use Auto Cycles for better fabric care and energy savings

The dryer senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.

Use the NORMAL dryness level to provide optimal energy savings.

temsto cyde:"

, Temperature:

Heavyweight items

such as towels or

heavy work clothes

Work clothes, casual

wear, mixed cottons,

sheets, corduroys

Jeans and denims

Jackets, comforters,

pillows

Shirts, blouses,

permanent press,

synthetics,

lightweight items

Undergarments,

blouses, lingerie,

performance wear

Large loads of cotton

towels, heavyweight

items

Heavy

Duty

Normal

Jeans

Bulky

Items

Casual

Delicate

Towels

High

Medium

Low

Extra Low

High

Dryness

Leveh

Normal

Less

Normal

Less

Normal

Less

Normal

Less

Normal

Less

Normal

Less

Normal

Default Available Cycle Details:

Time: Options: =

Damp Dry Signal

Wrinkle Shield t

Static Reduce

EcoBoost

Damp Dry Signal

Wrinkle Shield t

Static Reduce

EcoBoost

Damp Dry Signal

Wrinkle Shield t

Static Reduce

EcoBoost

Damp Dry Signal

Wrinkle Shield t

Static Reduce

EcoBoost

Damp Dry Signal

Wrinkle Shield t

Static Reduce

EcoBoost

Damp Dry Signal

Wrinkle Shield t

Static Reduce

EcoBoost

Wrinkle Shield

Offers stepped drying starting

with High heat followed by Medium

heat for enhanced fabric care

and energy savings.

Uses Medium heat to dry large

loads of mixed fabrics and items.

Normal is the preferred energy

cycle.

Stepped driving uses High heat

initially, followed by Medium heat

to drive moisture from jeans and

denims.

Use for drying large, bulky items;

do not overfill dryer drum. Partway

through the cycle, the signal will

sound for 2 minutes to indicate

when it is time to rearrange items

for optimal drying.

Uses a stepped drying temperature

from Medium to Low for improved

moisture removal and enhanced

fabric care.

Uses Extra Low heat to gently

dry delicate items.

This is a long cycle with high heat,

which has been proven to reduce

household bacteria. This cycle is

not recommended for all fabrics.

Use for large loads of heavyweight

fabrics such as cotton towels.

t Or Wrinkle Shield with Steam (on some models). Wrinkle Shield with Steam is available only with High and Medium Drying Temperature settings.

Load Size Recommendations

For best results, follow the wet load size recommendations noted

for each cycle.

_ mall load: Fill the dryer drum with 3-4 items,

not more than 1/4 full.

_ Medium load: Fill the dryer drum up to about 1/2 full.

Large load: Fill the dryer drum up to about 3/4 full.

Do not overload. Items need to tumble freely.

CYCLE GUIDE CYCLES

Settings and options shown in bold are default settings for that cycle.

Not all features and cycles are available on all models.

Not all settings and options are available on each cycle.

Adjusting drying time on Manual Cycles

When you select a Manual Cycle, the default

time appears in the display. Use the A and V

buttons to increase or decrease the time in 1

minute increments. Press and hold to change

the time in 5 minute increments.

The maximum dry time is 100 minutes.

Selecting the Drying Temperature

A High heat setting may be used for drying heavyweight items

such as towels and work clothes.

A Low to Medium heat setting may be used for drying

medium-weight items such as sheets, blouses, dresses,

underwear, permanent press fabrics, and some knits.

Use a no heat (air dry) setting for foam, rubber, plastic, or heat-

sensitive fabrics.

Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for

various loads, refer to the care label directions.

i/iii_i_iii _ _ i iii

Items to dry: Cycle:

Small loads and Quick Dry

sportswear

Any load Timed Dry

NOTE: Select Air

Onlyto dry foam,

rubber,plastic, or

heat-sensitive

fabrics.

Temperature:

High

Medium

Low

Extra Low

Air Only

High

Medium

Low

Extra Low

Air Only

Default

Time:

Available

Options:

Wrinkle Shield t

Cycle Details:

For small loads of 3-4 items.

li_ Use to dry items to a damp level for items that do

i_ not require an entire drying cycle. Select a drying

temperature based on the type of fabrics in your

load. If you are unsure of the temperature to select

for a load, select the lower setting rather than the

higher setting.

Or Wrinkle Shield with Steam (on some models). Wrinkle Shield with Steam is available only with High and Medium Drying Temperature settings.

CYCLE GUIDE CYCLES

Settings and options shown in bold are default settings for that cycle.

Not all settings and options are available on each cycle.

Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.

Items to

refresh:

Shirts, blouses,

and slacks

Mixed Loads

i i i

i iiii

Cycle:

Quick Refresh

with Steam

Enhanced

Touch Up

(on some

models)

Temperature:

Medium

High

Medium

Default

Time:

12(15)*

Available

Options:

Wrinkle Shield t

Static Reduce

Wrinkle Shield t

Static Reduce

i(_ Use to reduce odors andgarmentlightwrinkleS.to

i Select the number of be refreshed

i (onsome models). Do not add dryer sheets.

Use to remove wrinkles, including from loads left in

the dryer too long. Dry time will automatically adjust

when the load size is sensed. Cycle run time cannot

be manually adjusted, but Temperature is selectable.

Do not add dryer sheets

12 minutes on 11-cycle models. 15 minutes on 8-cycle models.

t Or Wrinkle Shield with Steam (on some models). Wrinkle Shield with Steam is available only with High and Medium Drying Temperature settings.

Load Size Recommendations

For best results, follow the load size recommendations noted for

each cycle.

_ mall load: Fill the dryer drum with 3-4 items,

not more than 1/4 full.

Medium load: Fill the dryer drum up to about 1/2 full.

Large load: Fill the dryer drum up to about 3/4 full.

Do not overload. Items need to tumble freely.

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from dryer.

Do not dry anything that has ever had anything

flammable on it (even after washing).

Failure to follow these instructions can result in death,

explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to

persons, read the iMPORTANT SAFETY iNSTRUCTiONS before

operating this appliance.

1, Clean the lint screen

Clean the lint screen before each load. Pull the lint screen

straight up. Roll lint off the screen with your fingers. Do not rinse

or wash screen to remove lint. Wet lint is hard to remove. Push

the lint screen firmly back into place.

For additional cleaning information, see Dryer Care.

2, Load the dryer

Fire Hazard

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on

it (including cooking oils).

items containing foam, rubber, or plastic must be dried

on a clothesline or by using an Air Cycle.

Failure to follow these instructions can result in death

or fire.

3. Press POWER

POWER

Press the POWER button to turn on the dryer.

4, Select the desired cycle

NORMAL

CASUAL BULKY toTEMS

DELICATE JEANS

Cydes

HEAVY

DUTY

_ TOWELS

Manual

@des

TIMED DRY_ _/ENHANCED

n, %_ _/ TOUCH U P

QU,CK DRY I QUICK REFRESH

_te_m Cycles I S.le_ t Furn_er of Garments

shown

Select the desired cycle for your load. See the Cycle Guide for

more information about each cycle. Not all cycles are on all

models.

Open the door by pulling on the handle. Place laundry in the

dryer. Add a dryer sheet to wet load, if desired. Close the door.

IMPORTANT: Do not overload the dryer. Items need to tumble

freely. Overloading can lead to poor drying performance and

may increase wrinkling and tangling.

5. Adjust cycle settings, if desired

11-cycle model shown

You may adjust different settings, depending on whether you

have selected an Auto Cycle, Manual Cycle, or Steam Cycle.

See the Cycle Guide for detailed information.

NOTE: Not all options and settings are available with all cycles.

Not all cycles are on all models.

Auto Cycles:

You can select a different dryness level, depending on your

load, by pressing the button for More, Normal, or Less.

Selecting More, Normal, or Less automatically adjusts the

dryness level at which the dryer will shut off. Once a dryness

level is set, it cannot be changed without stopping the cycle.

Automatic cycles give the best drying in the shortest time.

Drying time varies based on fabric type, load size, and

dryness setting.

Manual Cycles:

When you select a Manual Cycle, the default

time appears in the display. Use the A and V

buttons to increase or decrease the time in

1 minute increments. Press and hold to

change the time in 5 minute increments.

The default temperature may be changed

by pressing the Temperature button until the

desired dry temperature is lit.

Quick Refresh with Steam:

Press the Garment # to select the number of garments in

the load (on some models). The dryer will automatically set the

drying time and temperature. For models without Garment #,

the cycle time is preset to 15 minutes and is not adjustable.

6, Select any additional options

Static Reduce

Wrinkle Shield

with Steam

11-cycle model shown

Add additional options such as Static Reduce, Wrinkle Shield/

Wrinkle Shield with Steam and/or EcoBoost by pressing the

button for that option.

NOTE: Not all options and settings are available with all cycles.

7, Press and hold START/PAUSE

to begin cycle

START/PAUSE

Hold to START

Press and hold the START/PAUSE button to begin the cycle.

8, Remove garments promptly

after cycle is finished

11-cycle model shown WrinkleShield

Promptly remove garments after cycle w_,hSt_m

has completed to reduce wrinkling. If

you will be unable to remove the load

promptly, select the Wrinkle Shield/Wrinkle Shield with Steam

option before pressing START/PAUSE.

the Auto Cycle settings

to increase drying time

If all your loads on all Auto Cycles are consistently not as

dry as you would like, you may change the default

settings to increase the default dryness level.

Your automatic drying settings can be adjusted to adapt to

different installations, environmental conditions or personal

preference. This change is retained and will affect all of your

Automatic cycles, not just the current cycle/load. There

are 3 drying settings, which are displayed using the time

display:

01 Factory preset dryness level.

02 Slightly drier clothes, 15% more drying time.

03 Much drier clothes, 30% more drying time.

To change the drying settings:

NOTE: The settings cannot be changed while the dryer is

running or paused. The dryer must be in standby mode (the

power button is off) to adjust the default settings.

1. Before starting a cycle, press and hold the TEMP button

for 6 seconds.

2. Press the TEMP button to select the dryness level

shown in the time display: 01,02, or 03.

3. Press START/PAUSE to save the new dryness level

setting.

CYCLE STATUSINDICATORS DITIONAL FEATURES

11-cycle model shown

The Cycle Status Indicators show the progress of a cycle.

Check Lint Screen

The Check Lint Screen indicator will light when the drying

cycle is complete as a reminder to clean the lint screen.

Sensing

The Sensing indicator will light during Eco Auto Cycles to

indicate that the moisture sensor on the dryer is operating.

This indicator will not light during Manual Cycles or options

such as Wrinkle Shield 'M,

Wet

The load is still wet and/or the cycle just started.

Damp

This indicator shows that the load is partially dried and items

that you may wish to hang up or iron while still damp may

removed,

Cool Down

The dryer has finished drying with heat, and is now tumbling

the load without heat to cool it down and reduce wrinkling.

Steam (on some models)

This indicator will light when the Steam function is active.

NOTE: Steam is not available on all models or on all cycles.

Static Reduce (on some models)

This indicator will light when the Static Reduce function is

active.

NOTE: Static Reduce is not available on all models or on

all cycles.

Done

This will indicate that the selected cycle has ended and the

load may be removed from the dryer. If the Wrinkle Shield

option has been selected, the dryer may continue to tumble

the load, even if the Done indicator is lit.

Wrinkle Shield TM

This indicator will light if the Wrinkle Shield option has been

selected and is running. The dryer will continue to tumble the

load for up to 150 minutes after the cycle has ended.

USING THE DRYING RACK

To obtain a drying rack for your dryer, follow the instructions

included in your dryer drum. Remove and discard any

packing material before use.

Use the Drying Rack for items that you do not want to

tumble dry, such as sweaters and tennis shoes. When you

use the drying rack, the drum continues to turn, but the rack

remains stationary.

The drying rack is intended for use with the Manual Dry/

Timed Dry cycles only. The drying rack cannot be used

with Automatic cycles.

To use the drying rack:

IMPORTANT: Do not remove the lint screen.

1. Open dryer door.

2. Align the two hooks on the front of the drying rack with

the holes in the dryer door opening and press down fully

into holes. Rest the rear support on the dryer back ledge.

3. Place wet items on top of the drying rack. Allow space

around items for air to circulate. The drying rack does

not move, but the drum will rotate; be sure to leave

adequate clearance between items and the inside of

the dryer drum. Make sure items do not hang over the

edges or between drying rack grille.

4. Close the door.

5. Select a Timed Dry/Air Only, or Low Temperature cycle.

Items containing foam, rubber, or plastic must be dried

on a clothesline or by using the Air Only setting.

6. When the cycle is selected, the Estimated Time

Remaining display shows the default time. You can

change the actual time in the cycle by increasing or

decreasing the cycle time.

7. Start the dryer.

NOTE: Check the lint screen and remove any lint

accumulated from items dried on the drying rack

after the cycle is finished.

DR R CARE

CLEANING THE DRYER LOCATION -'_

l Keepdryerareaclearandfreefromitemsthatwouldblockthe I

air flow for proper dryer operation. This includes clearing piles

of laundry in front of the dryer.

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from dryer.

Place dryer at least 18 inches (460 ram) above the floor

for a garage installation.

Failure to do so can result in death, explosion, or fire.

CLEANING THE DRYER iNTERiOR

To clean dryer drum

1. Use a mild hand dish detergent mixed at a low

concentration with very warm water, and rub with

a soft cloth.

2. Rinse well with a wet sponge or towel.

3. Tumble a load of clean clothes or towels to dry drum

Use a microfiber cloth and hot water in a spray bottle

to clean the drum and a second microfiber towel to dry.

NOTE: Garments that contain unstable dyes, such as

denim blue jeans or brightly colored cotton items, may

discolor the rear of the dryer interior. These stains are

not harmful to your dryer and will not stain future loads

of clothes. Dry unstable dye items inside out to avoid

transfer of dye.

REMOVING ACCUMULATED LINT

From Inside the Dryer Cabinet

Lint should be removed every 2 years, or more often,

depending on dryer usage. Cleaning should be done by a

qualified appliance servicer or ventilation system cleaner.

From the Exhaust Vent

Lint should be removed every 2 years, or more often,

depending on dryer usage.

CLEANING THE LiNT SCREEN

Every load cleaning

The lint screen is located in the door opening of the dryer.

The control panel has an indicator light to remind you to

clean the lint screen after each load. A screen blocked

by lint can increase drying time.

To clean:

1. Pull the lint screen straight up. Roll lint off the screen

with your fingers. Do not rinse or wash screen to remove

lint. Wet lint is hard to remove.

2. Push the lint screen firmly back into place.

IM PORTANI"."

[] Do not run the dryer with the lint screen loose,

damaged, blocked, or missing. Doing so can cause

overheating and damage to both the dryer and fabrics.

[] If lint falls off the screen into the dryer during removal,

check the exhaust hood and remove the lint. See

"Venting Requirements."

As needed cleaning

Laundry detergent and fabric softener residue can build

up on the lint screen. This buildup can cause longer drying

times for your clothes, or cause the dryer to stop before

your load is completely dry. The screen is probably clogged

if lint falls off while the screen is in the dryer.

Clean the lint screen with a nylon brush every 6 months,

or more frequently, if it becomes clogged due to a residue

buildup.

To wash:

1. Roll lint off the screen with your fingers.

2. Wet both sides of lint screen with hot water.

3. Wet a nylon brush with hot water and liquid detergent.

Scrub lint screen with the brush to remove residue

buildup.

4. Rinse screen with hot water.

5. Thoroughly dry lint screen with a clean towel.

Reinstall screen in dryer.

NON=USE, STORAGE, AND MOVING CARE _

Install and store your dryer where it will not freeze. Because

some water may stay in the hose, freezing can damage

your dryer. If storing or moving your dryer during freezing

weather, winterize it.

Non-Use or Storage Care

Operate your dryer only when you are at home. Ifyou will

be on vacation or not using your dryer for an extended

period of time, you should:

1. Unplug dryer or disconnect power.

2. Clean lint screen. See "Cleaning the Lint Screen."

3. Turn off the water supply to the dryer. This helps to

avoid unintended flooding (due to a water pressure

surge) while you are away.

Moving Care

For power supply cord-connected dryers:

1. Unplug the power supply cord.

2. Gas models only: Close shutoff valve in gas supply line.

3. Gas models only: Disconnect gas supply line pipe and

remove fittings attached to dryer pipe.

4. Gas models only: Cap the open fuel supply line.

5. Steam models only: Shut off water faucet.

6. Disconnect the water inlet hose from faucet, then drain

the hose. Transport hose separately.

7. Make sure leveling legs are secure in dryer base.

8. Use tape to secure dryer door.

SPECIAL INSTRUCTIONS

FOR STEAM MODELS

Water inlet Hose

Replace inlet hose and hose screen after 5 years of use

to reduce the risk of hose failure. Periodically inspect and

replace inlet hose if bulges, kinks, cuts, wear, or leaks

are found.

When replacing your inlet hose, record the date

of replacement.

To Winterize the Dryer

1. Unplug dryer or disconnect power.

2. Shut off water faucet.

3. Disconnect water inlet hose from faucet and drain.

To Use the Dryer Again

1. Flush water pipes. Reconnect water inlet hose to faucet.

Turn on water faucet.

2. Plug in dryer or reconnect power as described in the

Installation Instruction.

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

For direct-wired dryers:

1. Disconnect power.

2. Disconnect wiring.

3. Steam models only: Shut off water faucet.

4. Steam models only: Disconnect the water inlet hose from

faucet, then drain the hose. Transport hose separately.

5. Make sure leveling legs are secure in dryer base.

6. Use tape to secure dryer door.

Reinstalling the Dryer

Follow the "Installation Instructions" to locate, level, and

connect the dryer.

First try the solutions suggested here or visit our website at www.whirlpool.com/help

for assistance and to possibly avoid a service call.

mfyou experience Possibme Causes

Dryer will not run

Door not closed completely.

START/PAUSE button not pressed

firmly or held long enough.

Make

Press

sure the dryer door is closed completely.

and hold the START/PAUSE button 2-5 seconds.

Household fuse is blown or circuit There may be 2 household fuses or circuit breakers for the

breaker has tripped, dryer. Check that both fuses are intact and tight, or that both

circuit breakers have not tripped. Replace the fuses or reset the

circuit breaker. If the problem continues, call an electrician.

Incorrect power supply. Electric dryers require 240-volt power supply.

Check with a qualified electrician.

Wrong type of fuse. Use a time-delay fuse.

Dryer will not heat The drum may be turning, but you may not have heat. Electric

dryers use 2 household fuses or circuit breakers. Replace the

fuses or reset the circuit breaker. If the problem continues, call

an electrician.

Humming or whining

noise with Steam cycle

selected

Thumping noise

Household fuse is blown or circuit

breaker has tripped.

Incorrect power supply.

Supply line valve not open.

Water pump on dryer is running.

Dryer hasn't been used in a while.

A small object caught between the

edges of dryer drum.

Dryer isn't properly leveled.

Clothing is balled up in dryer.

Gas valve operating.

Lint screen is clogged with lint.

The exhaust vent or outside

exhaust hood is clogged with lint,

restricting air movement.

Rattling or vibrating

noise

Clicking noise

Clothes are not drying

satisfactorily or drying

times are too long

The exhaust vent is not the correct

length.

Electric dryers require 240-volt power supply.

Check with a qualified electrician.

For gas dryers, make sure that the valve on the gas supply line

is open.

The water pump on the dryer is used during the Steam function. If

the dryer has just been installed or unused for an extended period,

the pump may be louder and run longer. This is normal.

This is normal. The thumping sound should diminish after afew

minutes of use.

Check the front and rear edges of the drum for small objects. Clean

out pockets before laundering.

The dryer may vibrate if not properly installed. See the

Installation Instructions. All four dryer feet should be in firm

contact with the floor.

When balled up, the load will bounce, causing the dryer to

vibrate. Separate the load items and restart the dryer.

On gas dryers, you may hear the gas valve clicking as it opens and

closes. This is normal.

Clean lint screen before each load.

Run the dryer for 5-10 minutes. Hold your hand under

the outside exhaust hood to check air movement. If you

do not feel air movement, clean exhaust system of lint

or replace exhaust vent with heavy metal or flexible metal vent.

See the Installation Instructions.

Check that the exhaust vent is not too long or has

too many turns. Long venting will increase drying times.

See the Installation Instructions.

The exhaust vent diameter is not Use 4" (102 mm) diameter vent material.

the correct size.

The dryer is not level.

The Air Only temperature setting

has been selected.

Clothes not contacting the moisture sensors during Automatic

cycles. See "Level the Dryer" in the Installation Instructions.

Select the right temperature for the types of garments

being dried. See "Cycle Guide".

First try the solutions suggested here or visit our website at www.whirlpool.com/help

for assistance and to possibly avoid a service call.

mfyou experience Possibme Causes Somution

Clothes are not drying

satisfactorily or drying

times are too long

Cycle time is too short

Lint on load

Stains on load

Stains on drum

Loads are wrinkled

The load is too large and heavy

to dry quickly.

Fabric softener sheets are blocking

the grille.

The dryer is located in a room with

temperature below 45°F (7°C).

The dryer is located in a closet.

The load may not be contacting

the sensor strips on Auto Cycles.

Clothes are coming out of the

Refresh cycle with damp or wet

spots.

The automatic cycle is ending

early.

Lint screen is clogged with lint.

improper use of fabric softener.

Loose dyes in clothes.

The load was not removed from

dryer at the end of the cycle.

The dryer was overloaded.

For steam cycles, the water is not

properly connected with the dryer.

Separate the load to tumble freely.

The air outlet grille is just inside the door, behind the lint screen.

Check that it is not blocked by a fabric softener sheet.

Use only one fabric softener sheet, and use it only once.

Proper operation of dryer cycles requires temperatures above

45°F (7°C).

Closet doors must have ventilation openings at the top

and bottom of the door. The front of the dryer requires

a minimum of 1" (25 mm) of airspace, and, for most

installations, the rear of the dryer requires 5" (127 mm).

See the Installation Instructions.

Level the dryer. See the installation instructions. All four dryer

feet should be in firm contact with the floor.

Under certain environmental or installation conditions you

may experience underdrying. Select the Touch Up cycle

(22 min. default time), which can be customized by selecting

High temperature. The cycle time will automatically be

calculated based on the size of your load.

Change the dryness level setting on Automatic Cycles.

Increasing or decreasing the dryness level will change the

amount of drying time in a cycle. If loads are consistently

ending too early, see also "Changing the Auto Cycle settings to

increase drying time".

Clean lint screen before each load.

Add dryer fabric softener sheets at the beginning of the cycle.

Fabric softener sheets added to a partially dried load can

stain your garments. Do not use fabric softener sheets with

steam cycles.

Drum stains are caused by dyes in clothing (usually blue

jeans). These will not transfer to other clothing.

Select Enhanced Touch Up Cycle to tumble the load with

water and heat. This cycle is best for smoothing out wrinkles

and reducing odors from loads consisting of wrinkle-free

cotton, cotton polyester blends, common knits and synthetic

garments.

NOTE: Refer to garment care label instructions. Dry clean only

garments are not recommended.

Dry smaller loads that can tumble freely. When using the

Quick Refresh cycle, select the correct number of garments

(1-9). Results may also vary depending on fabric type. This

cycle is best for reducing wrinkles and odors from loads

consisting of wrinkle-free cotton, cotton polyester blends,

common knits and synthetics.

Make sure water is connected to the dryer. Check that water

inlet hose is connected to both the faucet and dryer's water

inlet valve. Check that the water supply is turned on.

First try the solutions suggested here or visit our website at www.whirlpool.com/help

for assistance and to possibly avoid a service call.

Odors

Load too hot

Recent painting, staining, or

varnishing in the area where your

dryer is located.

For steam cycles, the water is not

properly connected with the dryer.

Odors are left in garments after

wearing.

Load removed before cooldown

portion of cycle complete.

Using Timed Dry cycle with a high

temperature setting.

Ventilate the area. When the odors or fumes are gone from

the area, rewash and dry the clothing.

Make sure water is connected to the dryer. Check that water

inlet hose is connected to both the faucet and dryer's water

inlet valve. Check that the water supply is turned on.

To remove odors left in garments after wearing, select Quick

Refresh for small loads of up to 9 garments. This cycle is

best for reducing wrinkles and odors from loads consisting of

wrinkle-free cotton, cotton polyester blends, common knits,

and synthetics.

Allow the dryer to complete the cooldown portion of the cycle

before removing the load.

Select an Auto Dry cycle with a lower heat setting to avoid

overdrying the load.

"PF" (power failure)

"L2" Diagnostic Code

(low or no line voltage

condition)

"AF" (low airflow

condition)

"F# E#" (F1 El, F3 El, etc.)

variable service codes.

The drying cycle has been

interrupted by a power failure.

There may be a problem with your

home power supply keeping the

dryer's heater from turning on.

The lint screen or vent is clogged;

the vent is crushed or kinked or

has too many turns.

The dryer is in need of service.

Press and hold START to restart the dryer.

The dryer will continue to run when this diagnostic code is

present. Press any key to clear the code from the display and

return to the estimated time remaining.

Try the following:

Check to see if a household fuse has blown or circuit breaker

has tripped. Electric dryers use two household fuses or

breakers. Replace the fuse or reset the circuit breaker.

Confirm the power cord is properly installed. Refer to

the Installation Instructions for details.

Select a Timed Dry heated cycle, and restart the dryer.

if the message persists, consult a qualified electrician.

The dryer will continue to run when this diagnostic code is

present. Press any key to clear the code from the display and

return to the estimated time remaining.

Try the following:

Clean lint screen.

Check to see if the vent run from the dryer to the wall is

crushed or kinked.

Confirm the vent run from the dryer to the wall is free of lint

and debris.

Confirm the exterior vent exhaust hood is free of lint and debris.

Confirm your vent system falls within the recommended run

length and number of elbows for the type of vent you are using.

Refer to "Plan Vent System" in the Installaton instructions for

details.

Select a Timed Dry heated cycle, and restart the dryer.

if the message persists, have your entire home venting run

cleaned.

if a code beginning with an "F" appears in the display.

Alternating between F# and E#, the dryer control has

detected a problem that requires service. Call for service.

WHIRLPOOLCORPORATIONLAUNDRYWARRANTY

LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or

furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter "Whirlpool") will pay for Factory Specified Parts

and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased. Service must be

provided by a Whirlpool designated service company. YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY

SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. This limited warranty is valid only in the United States or Canada and applies

only when the major appliance is used in the country in which it was purchased. Proof of original purchase date is required to obtain

service under this limited warranty.

ITEMS EXCLUDED FROM WARRANTY

This limited warranty does not cover:

1. Replacement parts or repair labor if this major appliance is used for other than normal, single-family household use or when it is

used in a manner that is inconsistent to published user or operator instructions and/or installation instructions.

2. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or

repair house fuses, or to correct house wiring or plumbing.

3. Service calls to repair or replace appliance light bulbs, air filters or water filters. Consumable parts are excluded from warranty

coverage.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in

accordance with electrical or plumbing codes, or use of products not approved by Whirlpool.

5. Cosmetic damage, including scratches, dents, chips or other damage to the finish of your major appliance, unless such damage

results from defects in materials or workmanship and is reported to Whirlpool within 30 days from the date of purchase.

6. Pick up and delivery. This major appliance is intended to be repaired in your home.

7. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

8. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an

authorized Whirlpool servicer is not available.

9. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance

with Whirlpool's published installation instructions.

10. Replacement parts or repair labor on major appliances with original model/serial numbers that have been removed, altered, or

cannot be easily determined.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR

A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces

do not allow limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This

warranty gives you specific legal rights, and you also may have other rights that vary from state to state or province to province.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.

WHIRLPOOL SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow

the exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This

warranty gives you specific legal rights, and you also may have other rights that vary from state to state or province to province.

If outside the 50 United States and Canada, contact your authorized Whirlpool dealer to determine if another warranty applies.

If you think you need repair service, first see the "Troubleshooting" section of the Use & Care Guide. If you are unable to resolve the

problem after checking "Troubleshooting," additional help can be found by checking the "Assistance or Service" section or by calling

Whirlpool. In the U.S.A., call 1-800-253-1301. In Canada, call 1-800-807-6777. 7/08

Keep this book and your sales slip together for future

reference. You must provide proof of purchase or installation

date for in-warranty service.

Write down the following information about your major appliance

to better help you obtain assistance or service if you ever need it.

You will need to know your complete model number and serial

number. You can find this information on the model and serial

number label located on the product.

Dealer name

Address

Phone number

Model number

Serial number

Purchase date

Votre s_curit_ et celle des autres est tr_s importante.

Nous donnons de nombreux messages de s_curit_ importants darts ce manuel et sur votre appareil m_nager. Assurez-vous de

toujours life tousles messages de s6curit6 et de vous y conformer.

Voici le symbole d'Nerte de securit6.

Ce symbole d'alerte de securite vous signNe les dangers potentiels de deces et de blessures graves & vous

et & d'autres.

Tousles messages de s6curit6 suivront le symbole d'alerte de securit6 et le mot "DANGER" ou

"AVERTISSEMENT". Ces mots signiflent :

Risque possible de d_c_s ou de blessure grave si vous ne

suivez pas imm_diatement les instructions.

Risque possible de d_c_s ou de blessure grave si vous

ne suivez pas les instructions.

Tousles messages de s6curite vous diront quel est le danger potentiel et vous disent comment reduire le risque de Nessure et

ce qui peut se produire en cas de non-respect des instructions.

L'installation de la s_cheuse a linge doit _tre effectu_e par un installateur qualifi&

installer la s_cheuse conform_ment aux instructions du fabricant et aux codes Iocaux.

Ne pas installer de s_cheuse & linge avec des mat_riaux d'_vacuation en plastique

souple ou un conduit m_tallique souple (de type papier d'aluminium). Si un conduit

m_tallique souple est installS, celui-ci doit 6tre d'un type sp_cifique identifi_ par le

fabricant de I'appareil et convenir a une utilisation avec les s_cheuses a linge. Les

mat_riaux d'_vacuation souples sont connus pour s'affaisser, _tre facilement _cras_s

et bloquer la charpie. Ces situations obstrueront le d6bit d'air de la s_cheuse & linge et

augmenteront le risque d'incendie.

Pour r6duire le risque de blessure grave ou de d6c_s, suivre routes

les instructions d'installation.

Conserver ces instructions,

Avertissements de la proposition 65 de I'E_tatde Californie •

AVERTISSEMENT ' Ce produit contient au moins un produit chimique connu par I'€:tat de Californie pour 6tre & I'origine de

cancers.

AVERTISSEMENT • Ce produit contient au moins un produit chimique connu par I'#tat de Californie pour 6tre & I'origine de

malformations et autres deficiences de naissance.

Dans I'#:tat du Massachusetts, les instructions d'installation suivantes sont applicables :

[] Les travaux d'installation et reparation doivent 6tre execut6s par un plombier ou tuyauteur qualifie ou licencie, ou par le

personnel qualifi6 d'une entreprise licenci6e par I'Etat du Massachusetts.

[] Si une vanne & boisseau spherique est utilis6e, elle doit comporter une manette "T".

[] Si un conduit de raccordement flexible est utilise, sa Iongueur ne dolt pas depasser 3 pi.

AVERTISSEMENT : Pour votre s6curit6, les renseignements dans ce manuel doivent

_tre observes pour r_duire au minimum les risques d'incendie ou d'explosion ou pour

_viter des dommages au produit, des blessures ou un d6c_s.

- Ne pas entreposer ou utiliser de I'essence ou d'autres vapeurs ou liquides

inflammables & proximit_ de cet appareil ou de tout autre appareil _lectrom_nager.

- QUE FAIRE DANS LE CAS D'UNE ODEUR DE GAZ :

• Ne pas tenter d'allumer un appareil.

® Ne pas toucher & un commutateur _lectrique; ne pas utiliser le t_l_phone se trouvant

sur les lieu×.

= Evacuer tous les gens de la piece, de 1'6difice ou du quarrier.

• Appeler imm_diatement le fournisseur de gaz d'un t_l_phone voisin. Suivre ses

instructions.

®A defaut de joindre votre fournisseur de gaz, appeler les pompiers.

- L'installation et I'entretien doivent _tre effectu6s par un installateur qualifi_, une

agence de service ou le fournisseur de gaz.

AVERTISSEMENT : L'odorat ne permet pas toujours la d6tection d'une fuite de gaz.

Les distributeurs de gaz recommandent remploi d'un detecteur de gaz (homologation UL ou CSA).

Pour d'autre information, contacter le foumisseur de gaz local.

En cas de detection d'une fuite de gaz, executer les instructions "Que faire dans le cas d'une odeur de gaz".

IMPORTANT : L'installation du gaz dolt se conformer aux codes Iocaux, ou en I'absence de codes Iocaux, au code canadien

d'installation B149.1 du gaz naturel ou du propane.

La s6cheuse dolt _tre 61ectriquement reli6e b,la terre conformement aux codes Iocaux, ou en I'absence de codes Iocaux, au Code

canadien de 1'61ectricit6,CSA C22.1.

La page charge ...

Whirlpool WGD94HEXW1 Le manuel du propriétaire

Marque: Whirlpool

Modèle: WGD94HEXW1

Catégorie: Sèche-linge électriques

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Whirlpool WGD94HEXW1 Owner's manual

Whirlpool WGD94HEXW1 Le manuel du propriétaire

Whirlpool WGD94HEXW1 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents