AT&T Marathon Cordless Headset Manuel utilisateur

AT&T Marathon™ Cordless Headset

User's manual

Congratulations

on your purchase of this AT&T product. Before using this AT&T

product, please read the Important safety information on pages

44-48 of this manual. Please thoroughly read this user’s manual

for all the feature operations and troubleshooting information

necessary to install and operate your new AT&T product.

This telephone meets the California Energy Commission

regulations for energy consumption. Your telephone is set up to

comply with the energy-conserving standards right out of the

box. No further action is necessary.

Model name: Marathon™ (Headset and headset base)

Type: DECT 6.0 cordless headset

Serial number:

Purchase date:

Place of purchase:

Both the model and serial numbers of your AT&T product can be

found on the bottom of the headset base.

Save your sales receipt and original packaging in case it is

necessary to return your product for warranty service.

the AT&T logo are trademarks of AT&T Intellectual Property licensed to

Advanced American Telephones, San Antonio, TX 78219. Printed in China.

Marathon™ is a trademark of Headsets.com, licensed to Advanced American

Telephones.

Parts checklist

Check to make sure the package includes the following items.

Save your sales receipt and original packaging in the event

warranty service is necessary.

Over the

head band

Behind the

neck band

Headset base

power adapter

Line

splitter

Colored

label

(light blue)

User's manual Quick start guide Cordless

headset

Over the ear hook

Headset base Battery

compartment

cover

Battery for

headset

Telephone line cords

(4-conductor and

2-conductor)

AT&T Marathon™ Cordless Headset

User's manual

AT&T Marathon™ Cordless Headset

Quick start guide

Optional accessories

The following optional accessories are compatible with your

headset and base:

The AT&T Handset Lifter with optional external ring detector.

The AT&T Wireless Remote Dial Pad allows you to place calls

when away from your telephone. The dial pad also allows

you to use the headset as a stand-alone product without a

connection to a telephone.

The remote dial pad does not work with an AT&T Marathon

cordless headset system that is connected to a telephone that

is part of a digital business system, unless there is an analog

adapter on the line. Contact your IT department, telephone

administrator, or your telephone service provider to determine if

the remote dial pad is compatible with your telephone system.

•

AT&T MarathonAT&T Handset lifter Remote Dial Pad

User’s manual

AT&T Marathon™

Cordless Headset

Table of contents

Getting started

Quick reference guide -

headset ......................................... 1

Headset indicator lights ....... 1

Alert tones ...................................... 3

Headset alert tones ................ 3

Quick reference guide -

headset base ............................. 4

Headset base indicator

lights .............................................. 6

Installation ...................................... 7

Battery installation ..................... 8

Installation preparation ........ 9

Battery charging ......................... 10

No lifter mode or

lifter mode .................................11

Cord labels .................................12

Digital subscriber line

(DSL) ..............................................12

Installation options ................13

Option 1: Headset base

with corded or cordless

phone installation ..................14

Option 2: Headset base

stand-alone installation ...... 15

Option 3: Headset base

with corded phone for

multiple line

system or

digital business system

installation .................................... 16

Adjust the lifter audio ..........17

Adding and registering

a headset....................................18

Registration options ..............18

Option 1: To register a

previously deregistered

Marathon headset to the

headset base ............................19

Option 2: To register the

headset to an AT&T DECT

6.0 cordless telephone

base ...............................................20

Deregistering a headset ........21

To deregister the headset

from the headset base ........21

Headset attachments ............... 22

Over the ear hook ..................22

Over the head band ..............25

Behind the neck band ..........27

Operation

Headset operation .....................29

Making a call.............................29

Answering a call on the

headset ........................................30

Ending a call on the

headset ........................................31

Auto off .......................................31

Temporary ring tone

silencing ......................................31

Options while on calls ............. 32

Volume control ........................32

Call waiting ................................32

Switch a call between a

handset and headset ............33

Multiple headset/

handset use ...............................34

Intercom calls and

transfers ...................................... 34

Mute ..............................................35

Appendix

Troubleshooting ..........................36

Important safety

information ................................44

Safety information..................44

Especially about cordless

headsets .....................................46

Precautions for users

of implanted cardiac

pacemakers ...............................48

For C-UL compliance ................49

Mesures de sécurité

importantes ............................... 49

Maintenance..................................55

FCC, ACTA and IC

regulations .................................56

California Energy Commission

battery charging testing

instructions ................................61

Limited warranty .........................62

Technical specifications .......... 66

DECT 6.0 digital

technology .................................66

Operating range ......................66

Extended range and

clarity ...........................................66

Index

Index ................................................. 67

1

Quick reference guide - headset

Getting started

ON/OFF light status

On Headset is charging in the headset base.

Headset is trying to register to the headset base.

Headset is searching for the headset base.

•

Flashing Flashes slowly when an incorrect type of battery

is installed.

Flashes three times, followed by a pause. This

cycle repeats three more times and then shuts

down to indicate that the battery is very low.

Flashes twice every five seconds to indicate that

the headset is not registered.

Flashes every 20 seconds to indicate that the

battery is low and needs to be charged in the

headset base.

Flashes every three seconds to indicate that the

headset is in use.

Flashes quickly when there is an incoming call.

•

Headset indicator lights

ON/OFF

Press to make, answer, or end

a call.

2

Getting started

Quick reference guide - headset

VOLUME /+ -

Press the volume keys on the

side of the headset to adjust the

listening volume when on a call

(page 32).

MUTE/FLASH

Press to mute the microphone

during a call (page 35).

Press and hold to answer a call

waiting call while on a call

(page 32).

Press to mute the ring tone in

the earpiece when there is an

incoming call.

Battery compartment cover

Remove to install or replace

the battery (page 8).

Earpiece

Microphone

3

Getting started

Three quick beeps

A VOLUME /+ - key is pressed when

the volume is already at its highest or

lowest setting.

The headset is not registered and the

headset ON/OFF button is pressed.

The headset is out of range from the

headset base during a call.

•

One short beep

every 20 seconds

Low battery warning.

One short beep

every 15 seconds

The call is muted.

One long beep

(repeated)

Call waiting alert tone.

One short beep The headset ON/OFF key is pressed to

go on hook or off hook.

Alert tones

Headset alert tones

4

Getting started

Quick reference guide - headset base

NO LIFTER MODE light

On when NO LIFTER MODE is

selected.

Flashes while on a call, or another

telephone is in use on the same line.

Flashes quickly when there is an

incoming call.

Charging cradle

Insert the headset here for charging

(page 10)

.

PAIR

Press and hold to begin headset

registration (pages 18-20) or

deregistration (page 21).

LIFTER MODE light

On when LIFTER MODE is selected.

Flashes while on a call.

Flashes quickly when there is an

incoming call.

MUTE light

On when a call is muted.

5

Getting started

VOLUME /

Press the volume keys on the side

of the headset base to adjust the

speaking volume while on a call

(page 32).

LIFTER AUDIO ADJUST

Switch to choose the best

headset audio quality when using

LIFTER MODE. See page 17 of this

manual or the handset lifter user's

manual for more information.

Quick reference guide - headset base

MODE

Press to choose between

NO LIFTER MODE or LIFTER MODE

when the headset is not in use.

The corresponding light turns on

(page 11).

6

Getting started

NO LIFTER MODE On when NO LIFTER MODE is selected

(default mode).

Flashes quickly when there is an

incoming call.

Flashes when the headset is in use or

another telephone on the same line is

in use.

•

LIFTER MODE On when LIFTER MODE is selected.

Flashes quickly when there is anquickly when there is an

incoming call.

Flashes when the headset is in use.

•

MUTE On when a call is muted.

On when you are registering a headset.

Flashes when you are deregistering the

headset(s) from the headset base.

•

Indicator lights

Headset base indicator lights

NO LIFTER MODE

LIFTER MODE

MUTE

7

Getting started

Avoid placing the headset base too close to:

• Communication devices such as television sets, VCRs or other

cordless telephones.

• Excessive heat sources.

• Noise sources such as a window with traffic outside, motors,

microwave ovens, refrigerators or fluorescent lighting.

• Excessive dust sources such as a workshop or garage.

• Excessive moisture.

• Extremely low temperature.

• Mechanical vibration or shock such as on top of a washing

machine or work bench.

Installation

See pages 8-10

for instructions.

You must install and

charge the battery before

using the headset.

STOP!

If you subscribe to high-speed Internet service (DSL - digital

subscriber line) through your telephone line, you must install a

DSL filter between the telephone line cord and the telephone

wall jack. The filter prevents noise and caller ID problems caused

by DSL interference. Please contact your DSL service provider for

more information about DSL filters.

8

Getting started

Battery installation

Install the battery, as shown below. After installing the battery,

you may be able to make and receive short calls. For optimal

performance, charge the headset battery for at least six hours

before use. When fully charged, the headset battery provides

approximately 10 hours of talk time or five days of standby time.

When the headset is not in use, recharge by returning it to the

headset base.

If the battery compartment cover is

attached, press on both sides of the

cover and lift it up and off.

Insert the battery into the battery

compartment with the label

THIS SIDE UP facing up.

Push the battery plug into the

connector inside the compartment

according to the color-coded label.

Place the wires neatly inside

the compartment.

Insert the tab on the bottom of the

battery compartment cover into the

battery compartment.

Press down gently on the battery

compartment cover until it snaps

into place.

NOTE: Remove the ear hook from the headset (see page 24) before

battery replacement.

1.

2.

3.

4.

5.

4

2

3

1

9

Getting started

Headset base installation

Installation preparation

Before installing the headset base, remove the rear bottom piece

of the headset base by pushing it away from the base, as shown

in Figure 1.

Install the headset base, as shown on the following pages.

After completing installation option 1, 2 or 3 (see page 13), slide

the rear bottom piece into the headset base until it clicks into

place, as shown in Figure 2.

Figure 1

Figure 2

10

Getting started

Push

ON/OFF light

Battery charging

After installing the battery, charge the headset by placing it in

the headset base, as shown below. The headset ON/OFF light is

on when the headset is charging.

CAUTION:

There may be a risk of detonation if you use a wrong type of

battery. Use only the supplied rechargeable battery or a proper

replacement battery.

1. Insert the headset into

the charging cradle.

2. Push the headset downward

until the ON/OFF light on

the headset turns on.

Insert

11

Getting started

Headset base installation

No lifter mode or lifter mode

There are two answer modes available on the

headset base. The current mode is indicated

by the NO LIFTER MODE or LIFTER MODE lights

on the front of the headset base.

When plugging your headset base into the

telephone wall jack (installation option 1

or 2), make sure the headset base mode is set

to NO LIFTER MODE.

-OR-

When connecting your headset base to a multiple line corded

telephone (installation option 3), make sure the headset base

mode is set to LIFTER MODE and that the LIFTER AUDIO ADJUST

is switched for the best headset audio quality (see page 17).

To change the answer mode:

When the headset is not in use, press MODE on the headset

base to select NO LIFTER MODE or LIFTER MODE. The

corresponding light on the front of the headset base turns on to

indicate the current mode.

For complete instructions on installing and using the handset

lifter, see the handset lifter user’s manual.

NOTE: If you are using the handset lifter, you must use LIFTER MODE.

•

MODE

12

Getting started

Headset base installation

Cord labels

The cords provided with your headset are attached with colored

labels to help you plug them into the correct jacks on the

headset base. Each jack on the headset base is labeled and

marked with a colored dot, allowing you to plug in the correct

cords by matching the colors.

If you are using installation option 3, you can attach the

provided light blue colored label to the end of the curly handset

cord of your telephone that you plug into the headset base.

Digital subscriber line (DSL)

If you subscribe to high-speed Internet service (DSL - digital

subscriber line) through your telephone line, you must install a

DSL filter between the telephone base and the telephone wall

jack. The filter prevents noise and caller ID problems caused by

DSL interference. Please contact your DSL service provider for

more information about DSL filters.

13

Getting started

Headset base installation

Installation options

IMPORTANT: If you purchased a handset lifter with your headset,

follow the installation instructions in the lifter manual.

If you purchased the AT&T Marathon without the lifter, you have

three installation options:

Option 1: Connect the headset to a corded or cordless telephone

(see page 14). You can use the provided line splitter to connect the

headset to a telephone.

Option 2: Connect the headset to a telephone wall jack (see

page 15). This option enables you to use the headset with a single

telephone line with or without a telephone.

Option 3: Connect the headset base to the curly handset cord of a

corded telephone (see page 16).

For this option, you can use the headset with a multiple line corded

telephone (such as the AT&T 1080, 1070 or 1040) or a digital

business system (such as a proprietary PBX telephone system). This

option requires the Marathon to be in LIFTER MODE to operate. You

may need to change the LIFTER AUDIO ADJUST setting on the base

for the best headset audio quality (see page 17).

14

Getting started

Headset base installation

Option 1: Headset base with corded or cordless phone installation

To use this installation option, make sure the headset base mode

is set to NO LIFTER MODE.

Plug one end of the

telephone line cord into

the TEL WALL JACK (red

dot) at the back of the

headset base.

•

Telephone

line cord

Plug the other end of

the telephone line cord

into the line splitter.

•

Plug the headset

base power adapter

into an electrical

outlet not controlled

by a wall switch.

•

Line splitter

Cordless or corded

phone

Connect another

telephone line cord

between the telephone

and the line splitter.

•

Plug the line splitter

into the telephone wall

jack (or DSL filter if

you subscribe to DSL

Internet service).

•

A DSL filter

(not included) is

required if you have

DSL high-speed

Internet service.

The DSL filter must

be plugged into the

telephone wall jack.

Plug the small end

of the headset

base power

adapter into the

POWER jack

(green dot) at

the back of the

headset base.

•

La page charge ...

AT&T Marathon Cordless Headset Manuel utilisateur

Ce manuel convient également à

AT&T Marathon Cordless Headset Manuel utilisateur

Documents connexes

Autres documents