Philips Car Stereo System CEM200 Manuel utilisateur
- Catégorie
- Récepteurs multimédia de voiture
- Taper
- Manuel utilisateur
Ce manuel convient également à
Register your product and get support at
www.philips.com/welcome
CEM200
EN User manual
3
English
EN
7 Adjust system settings 18
Turn demo mode on/off 18
Select start volume 18
Turn beep sound on/off 18
Turn display scroll on/off 18
Select shock-protect setting 19
Reset 19
8 Additional information 19
Detach the front panel 19
Replace fuse 20
Remove the unit 20
9 Product information 21
10 Troubleshooting 21
11 Glossary 22
Contents
1 Important 4
Safety 4
Notice 4
2 Your car audio system 6
Introduction 6
What’s in the box 6
Overview of the main unit 7
Overview of the remote control 8
3 Get started 9
Install the car audio 9
Install remote control battery 13
Turn on 14
Set clock 14
4 Listen to radio 14
Tune to a radio station 14
Store radio stations in memory 15
Tune to a preset station 15
3OD\DXGLRÀOHV 15
Play a disc 15
Control play 16
Search for an MP3/WMA track 16
View play information 16
Intro play 16
6KXIÁHSOD\ 16
Repeat play 16
Connect external sound source 16
6 Adjust sound 17
Adjust volume 17
Mute 17
Turn Dynamic Bass Boost (DBB) on/off 17
Select preset equalizer 17
Other sound settings 17
4
Notice
The making of unauthorized copies of
copy-protected material, including computer
SURJUDPVÀOHVEURDGFDVWVDQGVRXQG
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
This apparatus includes these labels:
Class II equipment symbol
This symbol indicates that the apparatus has a
double insulation system.
1 Important
Safety
Read and understand all instructions
before you use your apparatus. If damage
is caused by failure to follow instructions,
the warranty does not apply.
This apparatus is designed for negative
ground (earth) 12 V DC operation only.
To ensure safe driving, adjust the volume
to a safe and comfortable level.
Improper fuses can cause damage or
ÀUH:KHQ\RXQHHGWRFKDQJHWKHIXVH
consult a professional.
Use only the supplied mounting hardware
for a safe and secure installation.
To avoid short circuit, do not expose the
apparatus, remote control or remote
control batteries to rain or water.
Never insert objects into the ventilation
slots or other openings on the apparatus.
Clean the apparatus and frame with a
soft, damp cloth. Never use substances
such as alcohol, chemicals or household
cleaners on the apparatus.
Never place any objects other than discs
into the apparatus.
Never use solvents such as benzene,
thinner, cleaners available commercially,
or anti-static sprays intended for discs.
Visible and invisible laser radiation when
open. Avoid exposure to beam.
Risk of damage to the apparatus screen!
Never touch, push, rub or strike the
screen with any object.
Caution
Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
EN
5
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
$Q\FKDQJHVRUPRGLÀFDWLRQVPDGHWRWKLV
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
2009 © Koninklijke Philips Electronics N.V. All
rights reserved.
6SHFLÀFDWLRQVDUHVXEMHFWWRFKDQJHZLWKRXW
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment
and human health.
This product complies with the radio
interference requirements of the European
Community.
This product complies with the requirements
of the following directives and guidelines:
2004/108/EC + 2006/95/EC.
English
EN
6
a
hf
ij
g
dec
b
k
a
hf
ij
g
dec
b
k
2 Your car audio
system
Congratulations on your purchase, and
ZHOFRPHWR3KLOLSV7RIXOO\EHQHÀWIURPWKH
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With the in-car audio system, you can enjoy
your drive while you listen to:
FM or AM (MW) radio
Audio from CD or MP3 disc
Audio from external devices
What’s in the box
Check and identify the contents of your
package:
a In-car audio system
b Remote control
c Rubber cushion
d Screw (4 pieces)
e Disassembly tool ( 2 pieces)
f Front panel
g Trim plate
h Carrying case for front panel
i User manual
j Quick start guide
k Standard connector
EN
7
e MENU / DISP
Display radio frequency, clock and
radio program type (if available).
Display track, elapsed time, artist,
DOEXPWLWOHIROGHUÀOHDQGFORFN
Access system menu.
f
Return to previous menu.
Stop search.
Disable screen blackout.
g Display panel
h
Unlock the panel
i External device socket
Overview of the main unit
a
Select tuner band.
Select MP3/WMA folder.
Scroll up or down menu.
b DBB
Turn on or off Dynamic Bass Boost
(DBB) sound.
c SOURCE
Select audio source.
d
/MUTE
Turn the unit on or off.
Adjust volume.
&RQÀUPVHOHFWLRQ
Enter characters for search.
Mute or restore volume.
English
EN
8
Overview of the remote
control
a SOURCE
Select audio source.
b VOLUME +/-
Adjust volume.
c EQ
Select EQ setting.
d DBB
Turn on or off Dynamic Bass Boost
(DBB) sound.
e 3, REP
Select repeat play mode.
Select preset station no. 3.
f SEARCH
Store radio stations automatically.
Search a track or folder.
j
k
m
n
o
p
q
l
a
b
d
f
g
i
h
c
e
j
k
m
n
o
q
l
a
b
d
f
g
i
h
c
e
j 6
Select preset station no. 6
k 5
Select preset station no. 5
l SHUF, 4
$FWLYDWHRUGHDFWLYDWHVKXIÁHPRGH
Select preset station no. 4
m 3, REP
Set repeat play mode.
Select preset station no. 3
n INTRO, 2
Turn intro play on or off.
Select preset station no. 2
o 1,
Start play
Pause or resume play.
Select preset station no. 1
p
/
Tune to a radio station
Skip/search for a track.
q EQ/Audio
Select equalizer (EQ) setting.
Access audio setting menu.
r SEARCH
Store radio stations automatically.
Search a track or folder.
s Panel power connection
t Disc slot
u
Take disc out.
v RESET
Restore default settings.
EN
9
3 Get started
Caution
Use the controls only as stated in this user
manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your apparatus. The
model number and serial number are on the
bottom of your apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Install the car audio
These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
Caution
This unit is designed for negative ground
(earth) 12 V DC operation only.
Always install this unit in the car dashboard.
Other locations can be dangerous as the rear
of the unit heats up during use.
To avoid short-circuit: before you connect,
ensure that the ignition is off.
Ensure that you connect the yellow and red
power supply leads after all other leads are
connected.
Ensure that all loose leads are insulated with
electrical tape.
Ensure that the leads do not get caught under
screws orin parts that will move (e.g. seat rail).
Ensure that all ground (earth) leads are run to
a common ground (earth) point.
Use only the supplied mounting hardware for a
safe and secure installation.
,PSURSHUIXVHVFDQFDXVHGDPDJHRUÀUH
When you need to change the fuse, consult a
professional.
g DISP
Display radio frequency and clock.
Display track, elapsed time, artist,
DOEXPWLWOHIROGHUÀOHDQGFORFN
h 6
Select preset station no. 6.
i 5
Select preset station no. 5.
j SHUF, 4
$FWLYDWHRUGHDFWLYDWHVKXIÁHPRGH
Select preset station no. 4.
k 1,
Start play.
Pause or resume play.
Select preset station no. 1.
l INTRO, 2
Turn intro play on or off.
Select preset station no. 2.
m AUDIO
Access audio setting menu.
n Navigation buttons
/
Tune for radio station
Skip/search for MP3/WMA track.
/
Select tuner band.
Select MP3/WMA folder.
SEL
&RQÀUPVHOHFWLRQ
o MENU
Access system menu.
p
PWR,
Turn the unit on or off.
Mute or restore volume.
q
Return to previous menu.
Disable screen blackout.
English
EN
10
Connection: for cars with ISO
connectors
Caution
Ensure that all loose leads are insulated with
electrical tape.
1 Pull out the ISO connectors from car
dashboard and connect them to the
bigger end of the supplied standard
connector.
2 Connect the other end of the supplied
standard connector to the unit.
3 &RQQHFWWKHDQWHQQDDQGDPSOLÀHUDV
illustrated, if applicable. You can connect
WKHFDUDXGLRWRWKHDPSOLÀHUWKURXJK
RCA-TO-RCA cables (not supplied).
Note on the power supply lead (yellow)
When you connect other devices to this
apparatus, ensure that the rating of the
car circuit is higher than the total fuse
value of all the connected devices.
Notes on speaker connection
Never connect speaker wires to the
metal body or chassis of the car.
Never connect speaker wires with stripes
to one another.
Overview of parts
These are the supplied parts needed to
connect and install this unit.
a In-car audio system
b Sleeve
c Front panel
d Trim plate
e Rubber cushion
f Disassembly tools
g Screws (4 pieces)
h ISO connector
ab
c
efgh
d
EN
11
2 Cut off the bigger end of the supplied
standard connector.
3 Check the car’s wiring carefully and
connect them to the supplied standard
connector.
1 Green/black strip Left speaker (Rear)
2 White/black strip Left speaker (Front)
3 Gray/black strip Right speaker (Front)
4 Purple/black strip Right speaker (Rear)
eRED Ignition key +12V DC
when ON/ACC
fBLUE Motor/electric antenna
UHOD\FRQWUROOHDG$PSOLÀHU
relay control lead
gBLACK Ground
h ORANGE Illumination switch
i YELLOW To the +12V car battery
which is energized at all times
4 Connect the supplied standard connector
to the unit.
b
a
c
d
aa
b
c
d
a
b
e
f
c
d
g
h
i
b
c
d
Connector Connect to
1 ANTENNA Antenna
2 REAR LINE OUT R Rear right speaker
3 REAR LINE OUT L Rear left speaker
Connection: for cars without ISO
connectors
Caution
Be sure to connect the black ground (earth)
OHDGÀUVW
1 &RQQHFWWKHDQWHQQDDQGDPSOLÀHUDV
illustrated, if applicable.
Connector Connect to
1 ANTENNA Antenna
2 REAR LINE OUT R Rear right speaker
3 REAR LINE OUT L Rear left speaker
L-CHR-CH
AMP
a
c
b
L-CHR-CH
AMP
a
c
b
English
EN
12
4 Ensure that car dashboard opening is
within these measurements:
5 Install the sleeve into the dashboard and
EHQGWKHWDEVRXWZDUGWRÀ[WKHVOHHYH
Note
6NLSWKLVVWHSLIWKHXQLWLVQRWÀ[HGE\VOHHYH
but by supplied screws.
183 mm
53mm
5mm
Tip
The pin arrangement for the ISO connectors
depends on the type of vehicle you drive.
Make sure to make the proper connections to
prevent damage to the unit.
Mount in the dashboard
1 If the car does not have an on-board
drive or navigation computer, disconnect
the negative terminal of the car battery.
If you disconnect the car battery in
a car that has an on-board drive or
navigation computer, the computer
may lose its memory.
If the car battery is not disconnected,
to avoid short-circuit, ensure that
bare wires do not touch each other.
2 Remove the two screws on the top of the
unit.
3 Remove the mounting sleeve with the
supplied disassembly tools.
EN
13
2 Insert the right side of the panel in the
chassis until it is correctly engaged.
3 Press the left side of the panel and point
the left hole at the left pillar.
4 Release the panel to engage the left side.
Install remote control battery
Caution
Risk of explosion! Keep batteries away from
KHDWVXQVKLQHRUÀUH1HYHUGLVFDUGEDWWHULHV
LQÀUH
Risk of decreased battery life! Never mix
different brands or types of batteries.
Risk of product damage! When the remote
control is not used for long periods, remove
the batteries.
Perchlorate Material - special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
)RUÀUVWWLPHXVH
1 Remove the protective tab to activate the
remote control battery.
6 Place the supplied rubber cushion over
the end of the mounting bolt.
7 Slide the unit into the dashboard until you
hear a click sound.
8 Reconnect the negative terminal of the
car battery.
Attach the front panel
1 Attach the trim plate.
5mm5mm
English
EN
14
4 Listen to radio
Tune to a radio station
1
Press SOURCE repeatedly to select
Tuner.
2 Press or to select band: [FM1],
[FM2], [FM3], [AM1], or [AM2] .
3 Press or to tune to a radio station
manually.
The radio station is broadcast.»
To search for a radio station
automatically, press
or for 3
seconds.
Select tuner sensitivity
You can adjust the tuner sensitivity if you want
to receive more radio stations or only stations
with strong signal.
1 Press MENU/DISP for over 2 seconds.
2 Press or repeatedly until [LOCAL]
or [DX] is displayed.
3 Rotate to select a setting:
[ LOCAL] (local): Only stations with
strong signal can be broadcast.
[ DX] (distance): Stations with strong
and weak signals can be broadcast.
Select stereo/mono broadcasting
For stations with weak signals: to improve the
reception, change to monoaural sound.
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly until [STEREO]
or [MONO] is displayed.
3 Turn to select a setting:
[STEREO]: stereo broadcast.
[MONO]: mono broadcast.
To replace the remote control battery:
1 Open the battery compartment.
2 Insert 1 CR2025 batteries with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Turn on
1
Press to turn on the unit.
To turn off the unit, press
for 3
seconds.
Set clock
1
Press MENU/DISP for 3 seconds.
2 Press or repeatedly until the
currently time is displayed.
3 Turn clockwise to set hour.
4 Press WRFRQÀUP
5 Turn anti-clockwise to set minute.
6 Press WRFRQÀUP
View clock
1 Press MENU/DISP repeatedly until the
clock is displayed.
EN
15
5 Play audio files
Note
Ensure that the disc or device contains playable
ÀOHV
Play a disc
Note
You cannot play CDs encoded with copyright
protection technologies.
You can play commercially available audio CDs
and these discs:
CD-Recordables (CD-R)
CD-Re-writables (CD-RW)
MP3 CDs
WMA CDs
Note
Ensure that the disc contains playable content.
1 Press on the front panel to release the
panel.
2 Insert a CD with the printed side facing
up.
3 Close the panel.
Play starts automatically. »
To pause CD play, press 1
.
To resume CD play, press 1
again.
Remove the CD
To take out the CD,
1 Press .
2 Press beside the disc slot.
Tip
If the disc is blocked in the disc compartment,
press and hold until the disc comes out.
Store radio stations in
memory
You can store up to 6 stations in each band.
Store staions automatically
1 Press SEARCHÀUVWWKHQSUHVV .
The six strongest stations of the »
selected band are saved in preset
channel automatically: FM1,FM2,FM3
1-6, AM1, AM2.
Store staions manually
1 Tune to a station that you want to store.
(see ‘Tune to a radio station’ on page 14)
2 Press one of the numbered buttons 1 to
6 for 3 seconds.
The station is saved in the selected »
channel.
Tune to a preset station
1
Press or to select band.
2 Press the number button 1 to 6 to select
the preset station.
English
EN
16
Intro play
<RXFDQSOD\WKHÀUVWVHFRQGVRIHDFKWUDFN
1 During play, press INTRO, 2 to select:
[INT ON]$IWHUWKHÀUVW
seconds of each track have been
played, play stops.
[INT OFF] : Cancel intro play and
start normal play.
6KXIÁHSOD\
You can play the tracks in random order.
1 During play, press SHUF, 4 to select:
[SHUF ON]VWDUWVKXIÁHSOD\IRUDOO
tracks.
[SHUF OFF]FDQFHOVKXIÁHSOD\
Repeat play
1
During play, press 3, REP repeatedly to
select:
[RPT TRK] (repeat one track): play the
current track repeatedly.
[RPT DIR] (repeat a folder): play all tracks
in the current folder repeatedly.
[RPT ALL] (repeat all tracks): play all
tracks repeatedly.
[RPT OFF]: cancel repeat.
Connect external sound
source
1
Connect the external sound source to
MP3 LINK socket with a 3.5 mm cable.
2 Press SOURCE repeatedly until [MP3
LINK] is displayed.
3 Operate the external component (refer
to the instructions supplied with the
external component).
Control play
To select a folder, press or .
To skip to the previous/next track, press
or .
To search backward/forward rapidly
within the current track, press
or
for 3 seconds.
To pause, press 1,
.
To resume play, press 1,
again.
Search for an MP3/WMA
track
1
Press SEARCH.
Search menu is displayed.»
» [FOLD SCH]: search by folder
sequence.
» [FILE SCH]: search by track name.
2 Turn to select [FILE] and then press
WRFRQÀUP
3 Turn to enter a character and then
press
.
4 Repeat step 3 until the search term is
complete.
5 Press for 3 seconds to start search.
:KHQVHDUFKLVÀQLVKHGDOLVWRI»
matching tracks are displayed.
6 Turn to skip over the list.
7 Press to select a track.
View play information
1
During play, press MENU/DISP
repeatedly to view:
Track number and elapsed play time
Artist
Album
Title
Folder
File
Clock
EN
17
Select preset equalizer
1
Press EQ/Audio.
The current Equalizer setting is »
displayed.
2 Press EQ/Audio again repeatedly to
select a preset EQ:
[OPTIMAL] (optimal)
[FLAT]ÁDW
[POP] (pop)
[USER] (user)
[TECHNO] (techno)
[ROCK] (rock)
[CLASSIC] (classic)
[JAZZ] (jazz)
Other sound settings
You can also edit user preset EQ.
1 Press EQ/Audio for 3 seconds.
2 Press or repeatedly to select the
item to be adjusted:
[BAS] (bass) range: -7 to +7.
[TRE] (treble) range: -7 to +7.
[BAL] (balance) range: 12L to 12R. (L
= left speaker, R = right speaker)
[FAD] (fader) range: 12R to 12F. (R =
rear speaker, F = front speaker)
3 Turn to select a value.
6 Adjust sound
Adjust volume
1
Turn clockwise/anticlockwise to
increase/decrease volume.
Mute
You can turn off the sound of your audio.
1 During play, press MUTE .
To turn the sound back on, press
MUTE
again.
Turn Dynamic Bass Boost
(DBB) on/off
1
Press DBB, the current setting is
displayed:
» [DBB ON] : The Dynamic Bass Boost
(DBB) function is on.
» [DBB OFF] : The DBB function is off.
2 Press DBB again to change the DBB
setting.
English
EN
18
3 Press or repeatedly to until [A-VOL]
is displayed.
4 Turn to select a value: 0 - 47.
Turn beep sound on/off
Each time you press a button, the unit beeps.
You can turn off/on this beep sound.
1 Press MENU/DISP for3 seconds.
2 Press or repeatedly to until [BEEP
ON] or [BEEP OFF] is displayed.
3 Rotate to select a setting:
[BEEP ON]: Turn on the beep
sound.
[BEEP OFF]: Turn off the beep
sound.
Turn display scroll on/off
For track information that is longer than the
display panel: you can select to cut off the
remainder of the text, or scroll to display the
full text.
Note
If any special characters are present in the
MP3 track name or album name, it may not
display correctly on the screen because these
characters are not supported.
Some WMA is protected by Digital Rights
Management (DRM), it cannot be played on
the unit.
)ROGHUVÀOHVH[FHHGWKHVXSSRUWHGOLPLWRIWKH
unit are not displayed or played.
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly to until [ROLL
ON] or [ROLL OFF] is displayed.
3 Turn to select a setting:
[ROLL ON] (scroll on): Auto scroll
during play.
[ROLL OFF] (scroll off): No auto
scroll display.
7 Adjust system
settings
Turn demo mode on/off
When demo mode is on, when the unit is
idle for more than 2 minutes, all functions are
displayed.
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly to until [DEMO]
is displayed.
The screen shows current Demo »
mode setting.
3 Turn to select a setting:
[DEMO ON] : Turn on the demo
mode.
[DEMO OFF] : Turn off the demo
mode.
Select start volume
Each time you turn on the unit, it can play at the
last listened volume or at the preset volume.
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly to until [V -
LAST] or [V - ADJ] is displayed.
3 Turn to select a setting:
[V - LAST] : Each time you turn on
the unit, the volume remains from its
previous use.
[V - ADJ] : Each time you turn on
the unit, the volume is at the preset
level.
Store preset volume
You can turn on the unit at a preset volume.
1 Select [V - ADJ] as the start volume.
2 Press MENU/DISP for 3 seconds.
EN
19
8 Additional
information
Detach the front panel
You can detach the front panel to deter theft.
1 Press to release the panel.
2 Press the left side of the panel rightward.
3 Pull the panel towards you to detach it
from the chassis.
4 Store the panel in the supplied carry case
to protect it from dirt or damage.
Select shock-protect setting
You can select the shock protection setting,
depending on the stability of your car and the
condition of the road.
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly until [ESP] is
displayed.
3 Turn to select a setting:
[ESP 10 S]: select this when the road
is smooth and there are few bumps.
[ESP 40 S]: select this when the road
is bumpy and unstable.
Reset
You can reset the unit to its default setting.
1 Detach the front panel (see ‘Detach the
front panel’ on page 19).
2 Press the reset button by using a ball-
point pen or a similar tool.
Preset adjustments such as preset »
channels and sound adjustments are
erased.
English
EN
20
Remove the unit
You can remove the unit from the dashboard.
1 Detach the front panel.
2 Pull out the unit by using the removal
keys.
Replace fuse
If the fuse is damaged,
1 Check the electric connection.
2 Buy a fuse that matches the voltage of the
damaged fuse.
3 Replace the fuse.
Note
If the new fuse gets damaged again, there may
be an internal malfunction. Consult your Philips
dealer.
FUSE 15A
FUSE 15A
EN
21
10 Troubleshooting
Caution
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/support). When you contact Philips,
ensure that your apparatus is nearby and the
model number and serial number are available.
No power or no sound.
Car engine is not on. Turn the car engine
on.
Cable is not correctly connected. Check
connections.
Fuse is burnt. Replace fuse.
Volume is too low. Adjust volume (see
‘Adjust volume’ on page 17).
If the above solutions cannot help, press
the RESET button.
Ensure that the track played is of a
compatible format.
Noise in broadcasts.
Signals are too weak. Select other
stations with stronger signals.
Check the connection of the car antenna.
Change broadcast from Stereo to mono.
Cannot play disc
Ensure that the disc label is inserted with
the printed side facing up.
:LSHWKHGLVFZLWKÀEUHFOHDQLQJFORWK
from the centre to the edge in a straight
line.
This disc may be defective. Play another
disc.
(QVXUHWKDWWKH&'LVDÀQDOLVHG&'&'
R/CD-RW.
Ensure that the CD is not encoded with
copyright protection technologies.
9 Product
information
Note
Product information is subject to change
without prior notice.
Power supply 12 V DC (11 V - 16 V),
negative ground
Fuse 15 A
Suitable speaker
impedance 4 - 8
Maximum power
output 45 W x 4 channels
Continuous power
output
22 W x 4 RMS
(4
10% T.H.D.)
Pre-Amp output
voltage 2.0 V
Aux-in level
500 mV
Dimensions
(W x H x D) 188 x 58 x 206 mm
Weight 1.57 kg
Radio
Frequency range - FM 87.5 - 108.0 MHz
(100 kHz per step
in auto search and
50 kHz per step in
manual search)
Frequency range
- AM(MW)
522 - 1620 KHz
(9 KHz)
530 - 1710 KHz
(10 KHz)
Usable sensitivity
- FM 8 µV
Usable sensitivity
- AM(MW)
(S/N = 20 dB)
30 µV
English
EN
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
Philips Car Stereo System CEM200 Manuel utilisateur
- Catégorie
- Récepteurs multimédia de voiture
- Taper
- Manuel utilisateur
- Ce manuel convient également à
dans d''autres langues
Documents connexes
-
Philips CEM1100/00 Manuel utilisateur
-
-
-
-
-
Philips MCD107/98 Manuel utilisateur
-
-
-
-