TECHNICAL FILE
R03.001_25/06/2010
Novonivel® Aluminum is a made of aluminium transition prole
designed to be installed as a separator between oorings with
different thickness. This prole protects and decorates the oor and
provides with the resistance and lightness of aluminium. Easy to
install, is delivered with matt silver nish, so you can get a perfect
and aesthetic nish.
Novonivel® Aluminum
Material: Anodized aluminum
Lenght: 8ft2in / 2,5 m.l.
Dimensions: h: 5/16”, 3/8”, 1/2” / 8, 10, 12 mm.
a: 9/16”, 3/8”, 1/2” / 15, 19, 20 mm.
Packaging: 50 u/box
Color: 13 - Matt silver
Applications
Novonivel® Aluminum is a prole designed to its placement in pavements, to avoid discontinuities
safely. This prole has a wide non-slip face side and it is suitable for pedestrian or trafc. Some of its
applications, for example, are:
- Discontinuities in pavements outdoors or indoors.
- Entrances of garages
- Entrances of stablishments
- Public areas.
Alloy: 6063 (L-3441/38-337)
Fire resistance: M0 (UNE 23-727-90)
Abrasion resistance: Very good
Lightfastness Excellent
Appearance and color EN 12373-1
Materials
Aluminium
Technical Features and tests
General Features
Page 1 of 2
Novonivel® aluminium is a prole made by extrusion of aluminium. These proles have been anodized,
improving mainly by this process their corrosion and mechanical resistance and their appearance.. The
anodized applied, has the quality seal “Qualanod” which guarantees the quality of the process and the
resulting proles. This seal regulates several tests: appearance and color, thickness measurements,
sealing and impregnation control, abrasion resistance, lightfastness, acetic saline chamber and nitric
acid immersion.
TECHNICAL FILE
R03.001_25/06/2010
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in [email protected].
Technical information
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Novonivel® Aluminum
Page 2 of 2
1. Spread a big amount of gripping material on the surface where you will install the prole.
2. Then, place the prole and press it to let gripping material pass through the mechanized holes of
the xing wing.
3. Place a tile on the xing wing and press it to achieve an optimal contact with the gripping material.
4. Repeat the process, placing tiles along the xing wing of the prole.
5. Finally, clean the remaining material and let dry.
Placement
To see the video, capture this
image with your mobile phone
(software QR code reader is
necessary)or click on it.
1 2
3
4 5
Cleaning and maintenance
The product must be cleaned periodically with a soft mop. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry it to remove the humidity excess. The persistent dirtiness can
be removed by using cleaning approved agents lightly abrasive or a grid covered with polished powder
neutral.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
Indoors Outdoors
Floorings
Recyclable
The aluminium is a material with excellent chemical, physical and mechanical properties. It is lightweight,
tough, ductile, malleable and highly durable.
-
1
-
2
Emac NVA13516 Guide d'installation
- Taper
- Guide d'installation
dans d''autres langues
- English: Emac NVA13516 Installation guide
Documents connexes
-
Emac NVAF1312 spécification
-
-
-
-
-
-
-
Emac NR4131 spécification
-
-