Candy FCP876X/1 Manuel utilisateur

Marque: Candy

Modèle: FCP876X/1

Catégorie: Micro-ondes

Taper: Manuel utilisateur

Ce manuel convient également à

USER INSTRUCTIONS

OVENS

NOTICE D'EMPLOI ET D'INSTALLATION

DES FOURS ENCASTRABLES

CANDY HOOVER GROUP S.R.L. • Via Comolli 16 • 20861 Brugherio (MB) - Italy

Safety Indications

EN 02

• Avoid leaving food inside the oven after cooking for more than 15/20

minutes.

• WARNING: the appliance andaccessiblepartsbecome hot during use.

Be careful not to touchanyhot parts.

• WARNING: the accessible parts can become hot when the grill is in

use. Children should be kept ata safedistance.

• Cook the vegetables in a container with a lid instead of an open tray.

• Children under 8 should be kept at a safe distance from the appliance

if not continuouslysupervised.

• The appliance can be used by those aged 8 or over and by those with

limited physical, sensorial or mental capacities, without experience or

knowledge of the product, only if supervised or provided with

instruction as to the operation of the appliance, in a safe way with

awareness of the possible risks.

• WARNING: ensure that the appliance is switched off before replacing

the bulb, to avoid the possibility of electric shocks.

• WARNING: in order to avoid any danger caused by the accidental

resetting of the thermal interruption device, the appliance should not

be powered by an external switching device, such as a timer, or be

connected to a circuitthatis regularly switched on and off.

• During cooking, moisture may condense inside the oven cavity or on

the glass of the door. This is a normal condition. To reduce this effect,

wait 10-15 minutes after turning on the power before putting food

inside the oven. ln any case, the condensation disappears when the

ovenreachesthe cooking temperature.

• Children should not play with the appliance.

• Cleaning and maintenance should not be carried out by unsupervised

children.

• Do not use rough or abrasive materials or sharp metal scrapers to

clean the oven door glasses, as they can scratch the surface and cause

the glass to shatter.

• The oven must be switched off before removing the removable parts.

Aftercleaning, reassemblethem accordingthe instructions.

EN 03

• Do not use a steamcleaner forcleaning operations.

• Only use the meat probe recommendedfor this oven.

• The disconnection may be achieved by having the plug accessible or

by incorporating a switch in the fixed wiring in accordance with the

wiring rules.

• lf the power cable is damaged, it should be substituted with a cable or

special bundle available from the manufacturer or by contacting the

customer service department. The type of power cable must be

H05V2V2-F. This operation should be carried out by a suitably qualified

professional. The earth conductor (yellow-green) must be

approximately 10 mm longer than the other conductors. For any

repairs, refer only to the Customer Care Department and request the

use of original spare parts.

• Connect a plug to the supply cable that is able to bear the voltage,

current and load indicated on the tag and having the earth contact. The

socket must be suitable for the load indicated on the tag and must have

ground contact connected and in operation. The earth conductor is

yellow-green in colour. This operation should be carried out by a

suitably qualified professional. ln case of incompatibility between the

socket and the appliance plug, ask a qualified electrician to substitute

the socket with another suitable type. The plug and the socket must be

conformed to the current norms of the installation country. Connection

to the power source can also be made by placing an omnipolar breaker

between the appliance and the power source that can bear the

maximum connected load and that is in line with current legislation.

The yellow-green earth cable should not be interrupted by the breaker.

The socket or omnipolar breaker used for the connection should be

easily accessible when the appliance is installed.

• Failure to comply with the above can compromise the safety of the

appliance and invalidatethe guarantee.

• Any excess of spilled material should be removed beforecleaning.

• A long power supply failure during an occurring cooking phase may

cause a malfunction of the monitor. ln this case contact customer

service.

• .WARNING: beforeinitiatingthe automatic cleaning cycle:

• The appliance must not be installed behind a decorative door in order

toavoid overheating.

• WARNING: Do not line the oven walls with aluminium foil or single-use

protection available from stores. Aluminium foil or any other

protection, in direct contact with the hot enamel, risk melting and

deterioratingthe enamel of the insides.

• No additional operation/setting is required in order to operate the

appliance at the rated frequencies.

- Clean the ovendoor;

• CAUTION: Do not refill the cavity bottom with water during cooking or

when the oven is hot.

• ln ovens with meat probe it is necessary, before making the cleaning

cycle, close the hole with the nut provided. Always close the hole with

the nut when the meat probe is not used.

• When you place the shelf inside, make sure that the stop is directed

upwards and in the back of the cavity. The shelf must be inserted

completely into the cavity.

- Remove large or coarse food residues from the inside of the oven

using a damp sponge. Do not use detergents;

• During the pyrolytic cleaning process, surfaces can heat up more than

usual, children must therefore be kept at a safedistance.

- Remove all accessories and the sliding rack kit (where present); -Do

not place tea towels.

• WARNING: Never remove the oven door seal.

EN 04

EN 05

General Instructions

1.1 Safety indications

1.2 Electrical safety

1.3 Recommendations

1.4 Installation

1.5 Waste management

1.6 Conformity declaration

2.1 Overview

2.2 Accessories

2.3 First use

Product Description

3.1 Display description

3.2 Cooking modes

Use of the Oven

4.1 General notes on cleaning

4.2 Pyrolysis

4.3 Aquactiva Function

4.4 Maintenance

• Instruction for removal and cleaning

of the side racks

• Removal of the oven window

• Removal and cleaning of the glass

door

• Changing the bulb

Oven Cleaning and Maintenance

5.1 F.A.Q.

Troubleshooting

Summary

1. General Instructions

NOTE: the oven functions, properties and accessories cited in this manual will vary, depending on the

model youhave purchased.

We thank you for choosing one of our products. For the

best results with your oven, you should read this

manual carefully and retain it for future reference.

Before installing the oven, take note of the serial

number so that you can give it to customer service staff

if any repairs are required. Having removed the oven

from its packaging, check that it has not been damaged

during transportation. If you have doubts, do not use

the oven and refer to a qualified technician for advice.

Keep all of the packaging material (plastic bags,

polystyrene, nails) out of the reach of children. When

the oven is switched on for the first time, strong

smelling smoke can develop, which is caused by the glue on the insulation panels surrounding the oven

heating for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to

dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where

the instructionscontainedin this document are not observed.

1.1 Safety Indications

- do not pull on the powercable to disconnect the plug fromthe socket;

The use of anyelectrical appliance implies the observance of some fundamental rules:

- do not touch the appliance with wet or damp hands or feet;

- in case of malfunction and/or poor operation,switch offthe appliance and do not tamper with it.

Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for

example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot

be held responsiblefor anydamage resultingfrom improper, incorrect or unreasonableusage.

- in generalthe use of adaptors,multiple socketsand extension cables is not recommended;

1.2 Electrical Safety

CONNECTION

ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS.

The power supply to which the oven is connected must conform with the laws in force in the country of

installation. The manufacturer accepts no responsibility forany damage causedby the failureto observe

these instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a

disconnector with multiple poles, depending on the laws in force in the country of installation. The

electrical supply should be protected with suitable fuses and the cables used must have a transverse

section thatcan ensure correctsupply to the oven.

- powervoltageindicated on the gauge;

The grounding wire connected to the oven's earth terminal must be connected to the earth terminal of

the powersupply.

- the settingof the disconnector.

WARNING

Before connecting the oven to the powersupply, ask a qualified electrician to check the continuity of the

power supply's earth terminal. The manufacturer accepts no responsibility for any accidents or other

problems caused by failure to connect the oven to the earth terminal or by an earth connection that has

defective continuity.

The oven is supplied with a power cable that should only be connected to an electrical supply with 220-

240 Vac power between the phases or between the phase and neutral. Before the oven is connected to

the electrical supply, it is important tocheck:

EN 06

EN 07

1.3 Recommendations

Aftereach use of the oven, a minimum of cleaning will help keepthe oven perfectlyclean.

Do not line the oven walls with aluminium foilor single-use protection available from stores. Aluminium

foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the

enamel of the insides. In order to prevent excessive dirtying of your oven and the resulting strong

smokey smells, we recommend not using the oven at very high temperature. It is better to extend the

cooking time and lower the temperature a little. In addition to the accessories supplied with the oven,

weadvise you only use dishes and baking moulds resistant to veryhigh temperatures.

1.4 Installation

The manufacturers have no obligation to carry this out. If the assistance of the manufactureris required

to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The

installation instructions for professionally qualified personnel must be followed. Incorrect installation

may cause harm or injury to people, animals or belongings. The manufacturer cannot be held

responsiblefor such harm or injury.

The oven can be located high in a column or under a worktop. Before fixing, you must ensure good

ventilation in the oven space to allow proper circulation of the fresh air required for cooling and

protecting the internal parts. Make the openings specified on last pageaccording tothe type of fitting.

NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available

so that the oven can be connected to this if it is removed from the space in which it is installed. The

power cable must only be substituted by technical service staff or by technicians with equivalent

qualifications.

A low light around the central main switch could be present when the oven is off. This is a normal

behavior. I can be removed just turning the plug upside down or swappingthe supply terminals.

1.5 Waste management and environmental protection

In many countries, domestic collections may be available for large WEEEs. When you buy a new

appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as

long as the appliance is of an equivalenttype and has the same functions as the purchased appliance.

- The WEEE should not be treated as domestic waste;

SAVING AND RESPECTING THE ENVIRONMENT

This appliance is labelled in accordance with European Directive 2012/19/EU regarding

electric and electronic appliances (WEEE). The WEEE contain both polluting substances

(that can have a negative effect on the environment) and base elements (that can be

reused). Itis important that the WEEE undergo specific treatments to correctly remove and

dispose of the pollutants and recover all the materials. Individuals can play an important

role in ensuring that the WEEE do not become an environmental problem; it is essential to

follow a few basic rules:

- The WEEE should be taken to dedicated collection areas managed by the town council or a registered

company.

Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently

as possible, because heat from the cavity disperses every time it is opened. For a significant energy

saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and

use the residualheat that the oven continuesto generate. Keepthe seals clean and in order, to avoid any

heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed

cooking" programme makes energy saving more simple, moving the cooking process to start at the

reducedtarifftime slot.

1.6 Declaration of compliance

• By placing the mark on the appliance, we are confirming compliance to all relevant European

safety, health and environmentalrequirementswhich are applicable in legislationfor this product.

2. Product Description

2.1 Overview

1. Control panel

2. Shelf positions

(lateral wire grid if included)

3. Metal grill

4. Drip pan

5. Fan (behind the steel plate)

6. Oven door

2.2 Accessories

Metal grill

Drip pan

Holds baking trays and plates.

Collects the residuesthat drip during the cooking

of foodson the grills.

EN 08

Lateral wire grids

It located at both sides of the oven cavity. It holds

metalgrills and drip pans.

2.3 First Use

PRELIMINARYCLEANING

Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash

all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the

empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering

smells of newness.

3. Use of the Oven

3.1 Display description

5. LCD display adjustment controls

7. Programme selector knob

6. Function selector knob

1. Timer/automatic mode

4. Temperature or clock display

3. Defrost mode

2. Fan function

HOT -> When a programme finishes, if the oven is

still hot, the display shows "HOT", alternating with

the time, even if the knobsare positioned to OFF.

200°-> The temperature LED “°” flashes until the

displayed temperature is reached.

WARNING!

The first operation to carry out after installation,

or after a power cut, is to set the time of day (a

power cut has occured if the display is flashing

12:00).

EN 09

FUNCTION HOW TO ACTIVATE

HOW TO

DEACTIVATE

WHAT IT DOES WHY IT IS NEEDED

• Enables you to turn off

the sound of the minute

minder.

• Rotate the function

selector to the position

OFF.

• To turn off the sound of the

minute minder

• Enables you to set the

time which appears on

the display

• Rotate the function

selector to the position

OFF.

• Turn the right function

selector to a cooking

function

• Rotate the left function

selector to the position

"End of cooking"

• Set the end time of

cooking by using buttons

" + " and " - "

• Lighting Auto appears

• It allows to preset the end

of cooking time you want.

• When the cooking time is

set, turn the function

selector to OFF to go back

to actual time.

• To view the cooking time

selected, turn the left

function selector to End of

cooking Time

• When the cooking time

has elapsed, the oven

switch off automatically.

• To stop the cooking

functions early, turn the

function control to OFF

• Turn the left function

selector to the position

Minute Minder.

• Set the time of cooking

by using buttons

“+”and “-”

• Allow to use the oven as

alarm even if the oven is

switch off

• The oven cannot be used.

SILENCE

MODE

COOKING

DURATION

END OF

COOKING

MINUTE

MINDER

CHILD

SAFETY

LOCK

• Rotate the left function

selector to the position

" Silence mode “

• To set the time

NB : Set the time when you

first install your oven or just

after a black out (the clock is

showing a pulsating 12.00)

function

"Cooking Time Duration”

• Turn the right function

• Rotate the left function

selector to a cooking

selector to the position

• Lighting Auto appears

• Set the time of cooking

" - "

by using buttons " + " and

turn the function control

to OFF or set the time on

00.00; by rotating the

function selector to

Cooking Time Duration

and by using the buttons "

+ " and " - “

•When the cooking time

has elapsed, the oven

switch off automatically

and the alarm rings for

few seconds To stop the

cooking functions early,

the recipe chosen.

selector to OFF to go back

Cooking Time duration.

• To view the cooking time

function selector to

selected, turn the left

• It allows to preset the

cooking time required for

• When the cooking time is

set, turn the function

to actual time.

•This function is normally

used with the COOKING

DURATION function

•For example, the desired

food needs to cook for 45

minutes and I want it to be

ready for 12.30; in this case: at

the end of the set time, the

oven automatically switches

off and an alarm sounds.

Select the desired cooking

function. Set the cooking

duration to 45 minutes (“-”

“+”). Set the end of cooking to

12:30 (“-” “+”). Cooking will

automatically begin at 11:45

(12:30 minus 45 minutes), at

the end of the set cooking

time, the oven will

automatically switch off.

WARNING: by setting only the

end of cooking time, and not

the cooking duration, the oven

will immediately switch on

and switch off at the end of

the set cooking time.

• Set the time on 00.00 by

Minute Minder, and using

selector to the position

turning the left function

the button " - “

Child lock.

• Press the button " + "

on display

• Child lock is available

during 5 seconds

• Turn the left function

selector to the position

when " STOP " appears

• Turn back the left

function selector to Child

lock and press button " +

" during 5 seconds.

• Indication STOP

disappears.

• Rotate the left function

selector to the position

• Use the buttons " + " or

“Set the time”.

" - " to set the time

• For cooking the desired

recipes.

•During operation, the

display shows the

remaining time.

•Emits an audible signal at

the end of a set time.

• This function is useful

when there are children in

the house.

SET

THE TIME

EN 10

3.2 Cooking Modes

EN 11

Function

Dial

T °C

default

Function (Depends on the oven model)

LAMP: Turns on the oven light.

PYROLYSIS

Grill: 1800 W

The top heating element is used alone and you can adjust the temperature.

Five minutes preheating is required to get the elements red-hot. Success is

guaranteed for grills, kebabs and gratin dishes. White meats should be put at a

distance from the grill; the cooking time is longer, but the meat will be tastier.

You can put red meats and fish fillets on the shelf with the drip tray

underneath.The ovenhas two grill positions:

GRILL : use the grill with the door closed.

GRILL + FAN : use the turbo-grill with the door closed.

The top heating element is used with the fan circulating the air inside the oven.

Preheating is necessary for red meats but not for white meats. Ideal for

cooking thick food items, whole pieces such as roast pork, poultry, etc. Place

the food to be grilled directly on the shelf centrally, at the middle level. Slide

the drip tray under the shelf to collect the juices. Make sure that the food is not

tooclose tothe grill. Turn the foodoverhalfwaythroughcooking.

Allow about tenminutes extra when cooking foodsat the same time.

MULTI-LEVEL: We recommend you use this method for poultry, pastries, fish

and vegetables. Heat penetrates into the food better and both the cooking and

preheating times are reduced. You can cook different foods at the same time

with or without the same preparation in one or more positions. This cooking

method gives evenheat distribution and the smells are not mixed.

CONVENTIONAL: Both top and bottom heating elements are used. Preheat

the oven for about ten minutes. This method is ideal for all traditional roasting

and baking. For seizing red meats, roast beef, leg of lamb, game, bread, foil

wrapped food (papillotes), flaky pastry. Place the food and its dish on a shelf in

mid position.

DEFROST: When the dial is set to this position. The fan circulates air at room

temperature around the frozen food so that it defrosts in a few minutes

without the proteincontent of the foodbeing changed or altered.

BOTTOM HEATING + FAN: The bottom heating element is used with the fan

circulatingthe air inside the oven. This method is ideal for juicy fruit flans, tarts,

quiches and pâté.

It prevents food from drying and encourages rising in cakes, bread dough and

other bottom-cooked food.

Place the shelf in the bottomposition.

180

220

210

190

Grill: 1800 W Super Grill : 3000 W

SUPER GRILL: the oven has two grill positions

KEEP WARM: This is recommended to reheat precooked foodstuff, positioning

the shelf on the second level from top, or to defrost bread pizza or pastry by

positioning the shelf on the lower level. The temperature is preset in 60°C

constant, no regulationis possible.

210

ECO

230

T °C

range

50 ÷ MAX

ECO÷SUPER

50 ÷ MAX

L1 ÷ L5

*Tested in accordance with the EN 60350-1 for the purpose of energy consumption declaration and energy class.

EN 12

4. Oven cleaning and maintenance

4.1 General notes on cleaning

OVENWINDOW SEAL

ACCESSORIES

The lifecycle of the appliance can be extendedthrough regularcleaning. Waitfor the oven to cool before

carrying out manual cleaning operations. Never use abrasive detergents,steel wool or sharp objects for

cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based

detergents (ammonia).

GLASS PARTS

Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive

detergents.

It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven. To

remove more obstinate stains, you can use a detergent-soaked sponge, well wrung out, and then rinse

with water.

DRIP PAN

If dirty, theseal can be cleaned with a slightly damp sponge.

If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan

in the dishwasheror use a commercial ovendetergent. Never put a dirty pan back intothe oven.

After using the grill, remove the pan fromthe oven.Pour the hot fat into a container and wash the pan in

hot water, usinga sponge and washing-up liquid.

4.2 Pyrolysis

The oven is equipped with a pyrolyser cleaning system, which destroys food residues at high

temperature. The operation is carried out automatically by means of the programmer. The resulting

fumes are rendered “clean” by passing over a Pyrolyser wich starts as soon as cooking begins. As very

high temperatures are required by the Pyrolyser, the oven door is fitted with a safety lock. The pyrolyser

canbe stopped at anytime. The door cannot be opened untilthe safetylock is displayed.

Tip : Carrying out Pyrolytic cleaning immediately after cooking allows you to take advantage of residual

heat,thus saving energy.

•Excessspillage mustbe removed before cleaning.

•Remove all the accessories from the oven because they are not able to tolerate the high

temperatures used during the pyrolytic cleaning cycle ; in particular removing grids, side racks and

the telescopic guides (refer to the chapter REMOVING GRIDS AND SIDE RACKS) . In ovens with meat

probeit is necessary, before making the cleaning cycle, close the hole with the nut provided.

•Close the oven door.

ECOPYROCLEAN : Cleans a moderately stainedoven. Operates fora period of 90 minutes.

TWO PYROLYTIC CYCLEare pre-set:

NOTE: If a hob has been fitted above the oven, neveruse the gas burners or the electric hot-plateswhile

the Pyrolyser is working, this will prevent the hob from overheating.

• Remove large or coarse food residues from the inside of the oven using a damp sponge. Do not use

detergents;

• Clean the oven door;

SUPER PYROCLEAN: Cleans a heavily stainedoven. Operates fora period of 120 minutes.

Before executing a pyrolytic cycle:

• Do not place tea towels.

•Remove any large spillages or stains as it would take too long to destroy them. Also excessively

large amounts of grease could ignite when subject to the very high temperatures of the Pyrolytic

cycle.

• Removeall accessories and the sliding rackkit (where present);

Never use commercially available cleaning products on a Pyrolytic oven!

EN 13

3- After few minutes, when the oven reaches a high temperature, the door locks automatically. The

pyrocleancycle can be stoppedat anytime byturning the function selector back to '0' (the word OFF will

be displayed for3 seconds).

1- Rotate the function selector to the position " ". On the display, appears the indication" ECO " or

" SUP ". The preset time is 90 min, this can be varied from 90 min (Eco mode) to 120 min (Sup mode) via

the programmer (setting button " + " or " - "). If the oven is verydirty, it is recommend o increase the time

to120 min, if the oven is moderatelydirty reduce the cleaning cycletime to 90 min.

Using the pyroliticcycle:

1- Rotate the function selector into position pyrolisys.The display will show either "ECO"or "SUP“

2- The pre-set time is90 minutes but it can be varied from 90 min. (Eco mode) to 120 min. (Sup mode)

using the programmer (" +" or "-" key).If the oven is very dirty, the time should be increased to 120 min.,

while if the ovenis only a slightly dirty, reduce the cleaning cycleto 90 min.

2- It is possible to defer the start time of the pyroclean cycle by changing the END time via the

programmer.

Use of the pyrolyticcycle in Touch Control ovens:

5- You can turn the function selector back to " 0 " but if the temperaure is still high, the "0--n " indication

appearsto informthat the door is locked.

4- Once the pyroclean cycle is finished, the pyrolysis will switch off automatically. On the display appears

the indication"END" until the door is locked then "0--n".

4.3 Aquactiva Function

Make sure that the appliance is cool before you touch it.

5. After 30 minutes switch off the program and allow the oven to cool down.

Care must be taken with all hot surfaces as there is a risk of burns. Use distilled or drinkable water.

6. When the appliance is cool, clean the inner surfaces of the oven with a cloth.

Warning:

N.B.: Certain pyrolytic ovens with the Precò Touch User Interface offer the Aquactiva function. To

activate it, set the function selector to the AQUACTIVA symbol ( ) and set the oven temperature

to 90°, using the “-” and “+” keys.

4. Allow the program to operate for 30 minutes.

3. Set the temperature to the Aquactiva icon

The Aquactiva procedure uses steam to help remove remaining fat and food particles from the oven.

1. Pour 300 ml of water into the Aquactiva container at the bottom of the oven.

2. Set the oven function to Static ( )or Bottom ( )heater

300 ml

2. Remove the side racksby pulling them towardsyou

INSTRUCTION FORREMOVAL AND CLEANING OF THE SIDE RACKS

3. Clean the side racksin a dishwasher or with a wetsponge and then dry them immediately.

1. Unscrewthe bolt in an anti-clockwise direction.

4. Having cleaned the side racks, put them back in and reinsert the bolts, ensuring they are fully

tightened

4.4 Maintenance

3. Replacethe window by carrying out the procedure in reverse.

REMOVAL OF THE OVEN WINDOW

1. Open the front window.

2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them

downwards.

EN 14

7. Atthe end of cleaning or substitution, reassemblethe parts in reverse order.

REMOVAL AND CLEANING OF THE GLASS DOOR

1. Open the ovendoor.

2.3.4. Lock the hinges, remove the screwsand remove the upper metalcover by pulling it upwards.

5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove

the secondand third glass (if present)).

On all glass, the indication "Pyro" must be legible and positioned on the left side of the door, close to the

left-handlateralhinge. In this way, the printedlabel of the first glass will be insidethe door.

EN 15

LOW-E

2. Undo the glass cover, unscrew the bulb and replace it with a newbulb of the same type.

1. Disconnectthe oven from the mainssupply.

3. Once the defective bulb is replaced,replace the glass cover.

CHANGING THE BULB

5. Troubleshooting

5.1 FAQ

PROBLEM POSSIBLE CAUSE SOLUTION

The oven does not heat up The clock is not set Set the clock

The child lock is on

A cooking function and

temperature has not been set

Deactivate the child lock

Ensure that the necessary

settings are correct

The oven does not heat up

EN 16

Conseils De Sécurité

FR 17

• Les enfants de moins de 8 ans doivent rester à une distance de sécurité

de l’appareil s’ils ne sont pas surveillés en permanence.

• Pendant la cuisson, de l’humidité peut se condenser à l’intérieur de la

cavité ou sur la vitre de la porte. Il s’agit d’un phénomène normal. Pour

réduire cet effet, attendez 10-15 minutes après avoir allumé l’appareil

avant de mettre les aliments au four. La condensation disparaîtra de toutes

façons dès que le four aura atteint la température de cuisson.

• Cuisez les légumes dans un récipient avec couvercle plutôt que dans un

ustensile ouvert.

• Évitez de laisser des aliments à l’intérieur du four plus de 15-20 minutes

après cuisson.

Faites attention à ne pas toucher les parties chaudes.

• Le nettoyage et l’entretien ne doivent pas être effectués par des enfants

sans surveillance.

• AVERTISSEMENT : Afin d’éviter tout risque lié à la réinitialisation

accidentelle de l’interrupteur thermique, l’appareil ne doit pas être

alimenté par un dispositif de commutation externe, tel qu’une minuterie,

ou relié à un circuit régulièrement allumé et éteint.

• AVERTISSEMENT : Les parties accessibles peuvent devenir très chaudes

quand le grill est en marche. Les enfants doivent être tenus à une distance

de sécurité.

L’appareil peut être utilisé par des enfants de plus de 8 ans et par des

personnes dont les capacités physiques, sensorielles ou mentales sont

limitées, sans expérience ni connaissance du produit, uniquement s’ils

sont surveillés ou s’ils ont été informés de la manière d’utiliser l’appareil,

en toute sécurité et qu’ils comprennent les risques possibles.

• AVERTISSEMENT : L’appareil et ses parties accessibles chauffent pendant

l’utilisation.

• AVERTISSEMENT : Vérifiez que l’appareil est éteint avant de remplacer

l’ampoule, pour éviter le risque de chocs électriques.

• Les enfants ne doivent pas jouer avec l’appareil.

• N’utilisez pas de matériaux rugueux ou abrasifs ou de racloirs

métalliques acérés pour nettoyer les vitres des portes des fours, car cela

pourrait rayer la surface et provoquer la rupture de la vitre.

FR 18

• Après le nettoyage, remontez-les selon les instructions.

• Coupez le four avant de retirer les pièces amovibles.

• Utilisez uniquement la sonde à viande recommandée pour ce four.

• Branchez le câble d’alimentation sur une prise de courant qui supporte le

voltage (le courant et la charge sont indiqués sur l’étiquette) et vérifiez la

présence d’une mise à la terre. La prise d’alimentation doit supporter la

charge indiquée sur l’étiquette et être dotée d’une mise à la terre en état

de fonctionnement. Le conducteur de mise à la terre est jaune et vert.

Cette opération doit être exécutée par le personnel qualifié. En cas

d’incompatibilité entre la prise d’alimentation et la fiche du câble de

l’appareil, demandez à un électricien professionnel de remplacer la prise

d’alimentation par un dispositif compatible.

Le conducteur jaune et vert de mise à la terre ne doit pas être bloqué par

le disjoncteur. La prise d’alimentation ou le disjoncteur multipolaire utilisé

pour le branchement doit rester à tout moment accessible après

installation de l’appareil.

• Si le câble d’alimentation est endommagé, il doit être remplacé par un

câble ou un faisceau de câbles spécial disponible auprès du fabricant ou du

service après-vente.

• N’utilisez pas un nettoyeur à vapeur pour le nettoyage.

• Le câble d’alimentation requis est le H05V2V2-F.

• Cette opération doit être exécutée par le personnel qualifié. Le

conducteur de mise à la terre (jaune et vert) doit être environ 10 mm plus

long que les autres conducteurs. Pour toutes réparations, contactez le

service après-vente en insistant sur l’utilisation de pièces de rechange

d’origine.

La fiche du câble d’alimentation et la prise d’alimentation doivent être

conformes aux normes en vigueur dans le pays d’installation.

Il est possible de brancher l’appareil à la prise d’alimentation en installant

entre l’appareil et la prise d’alimentation un disjoncteur multipolaire qui

supporte la charge électrique maximale, conformément aux lois en

vigueur.

• Le débranchement doit se faire à l’aide soit de la prise d’alimentation,

soit d’un interrupteur installé sur le circuit électrique fixe, conformément

aux normes électriques.

FR 19

- Enlevez tous les accessoires et le kit de grille coulissante (le cas échéant).

- Éliminez les résidus alimentaires importants ou grossiers de l’intérieur du

four à l’aide d’une éponge humide. N’utilisez pas de détergents.

• Le non-respect des consignes ci-dessus peut compromettre la sécurité

de l’appareil et annuler la garantie.

• Éliminez les éclaboussures importantes avant de procéder au nettoyage.

• Une coupure de courant prolongée durant une phase de cuisson peut

engendrer un dysfonctionnement de l’écran. Dans ce cas, veuillez

contacter le service après-vente.

• L’appareil ne doit pas être installé derrière une porte décorative, pour

éviter la surchauffe.

• Pour introduire la grille dans le four, vérifiez que le butoir est dirigé vers le

haut et au fond de la cavité. La grille doit être complètement insérée dans

la cavité.

• AVERTISSEMENT : Ne recouvrez pas les parois du four avec du papier

aluminium ou une protection jetable disponible dans les magasins. Le

papier d’aluminium ou toute autre protection, en contact direct avec

l’émail chaud, risque de fondre et de détériorer l’émail de la cavité

intérieure.

• AVERTISSEMENT : N’enlevez jamais le joint de la porte du four.

• PRUDENCE : Ne remplissez pas le fond de la cavité avec de l’eau pendant

la cuisson ou lorsque le four est chaud.

• Aucune autre opération ni aucun autre réglage ne sont requis pour faire

fonctionner l’appareil aux fréquences nominales.

• AVERTISSEMENT : Avant de lancer le cycle de nettoyage automatique :

- Nettoyez la porte du four.

- Ne placez pas des torchons à l’intérieur.

• Dans les fours avec une sonde à viande, avant de lancer le cycle de

nettoyage, il faut fermer le trou avec l’écrou si vous n’utilisez pas la sonde à

viande.

• Pendant le nettoyage par pyrolyse, les surfaces peuvent devenir

beaucoup plus chaudes que d’habitude, les enfants doivent donc être

tenus à une distance de sécurité.

FR 20

Instructions Générales

1.1 Indications de sécurité

1.2 Sécurité électrique

1.3 Recommandations

1.4 Installation

1.5 La gestion des déchets et la

protection de l'environnement

1.6 Déclaration de conformité

2.1 Vue d'ensemble

2.2 Accessoires

2.3 Première utilisation

Description du produit

3.1 Description de l'affichage

3.2 Mode de cuisson

Utilisation du Four

4.1 Remarques générales concernant

le nettoyage

4.2 Pyrolyse

4.3 Aquactiva Fonction

4.4 Entretien

• Retrait et nettoyage des grilles

latérales

• Retrait de la porte du four

• Retrait et nettoyage des vitres

• Remplacement de l'ampoule

Nettoyage du four et

maintenance

5.1 F.A.Q.

Dépannage

SOMMAIRE

La page charge ...

Candy FCP876X/1 Manuel utilisateur

Marque: Candy

Modèle: FCP876X/1

Catégorie: Micro-ondes

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Candy FCP876X/1 User manual

Candy FCP876X/1 Manuel utilisateur

Ce manuel convient également à

Candy FCP876X/1 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents