Freeman PE1GCCK Manuel utilisateur

Catégorie
Cloueuse
Taper
Manuel utilisateur
HTTP://WWW.FREEMANTOOLS.COM
1-888-669-5672
PRIME GLOBAL PRODUCTS, INC.
SAVE THIS MANUAL FOR FUTURE REFERENCE
WARNING:
HTTP://WWW.FREEMANTOOLS.COM
1-888-669-5672
PRIME GLOBAL PRODUCTS, INC.
IMPL31-V1 05/20
Failure to follow warnings could result in DEATH OR SERIOUS INJURY.
MODEL: PL31
16 GA & 18 GA
16 GA & 18 GA
3-IN-1 NAILER / STAPLER
3-IN-1 NAILER / STAPLER
16 GA & 18 GA
3-IN-1 NAILER / STAPLER
Keep this manual for the safety
warning, precautions, operations,
i n s p e c t i o n s a n d m a i n t e n a n c e
information. Keep this manual and
the receipt in a safe and dry place for
future reference.
02
HTTP://WWW.FREEMANTOOLS.COM 1-888-669-5672
WARNING:
The warnings and precautions discussed in this manual cannot cover all possible conditions
and situations that may occur. Please be aware of the potential hazards, and take all
necessary precautions to avoid risk of injuries.
To avoid serious personal injury,
do not att e m p t t o u s e t his
product until you read the manual
thoroughly and understand it
completely. Save this manual and
review frequently for continuing
safe operation and instructing
others who may use this tool.
!
WARNING:
SAVE THIS MANUAL
03
The following signal words and meanings are intended to explain the levels of risk
associated with this tool, and can be found in the manual, packaging, labeling, and
all other information provided with this tool:
SYMBOLS SIGNAL MEANING
!
!
WARNING:
CAUTION:
CAUTION:
Indicates a potentially hazardous situation,which, if
not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation, which, if
not avoided, may result in minor or moderate injury.
(Without symbol) Indicates a situation that may result
in property damage.
HTTP://WWW.FREEMANTOOLS.COM 1-888-669-5672
SYMBOLS
CALIFORNIA PROPOSITION 65
!
GENERAL SAFETY RULES
SINSTRUCTIONS PERTAINING TO A
RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS.
!
W h e n u s i n g t o o l s , b a s i c
precautions should always be
followed, including the following:
WARNING:
WARNING:
WORK AREA
Keep the work area clean and well
lit. Cluttered benches and dark areas
increase the risks of accidents.
Do not operate the tool in explosive
at m o sp heres, su c h a s in th e
presence of flammable liquids,
gases, or dust. The tool creates a
spark which may ignite flammable
liquids, gases or dust.
Keep bystanders, children, and
others away while operating the
tool. Distractions could result in
improper use and cause injury.
Av oi d un in t e n t i on al m i s f ir e s.
A l w a y s u s e c a u t i o n t o a v o i d
accidentally firing. Do not point at
yourself or anyone else regardless if
it contains fasteners or not.
Do not nail on top of another nail. This nail
can cause the nail to be deflected and hit
someone, or cause the tool to react and
result in a risk of injury to persons.
Remove finger from the trigger when not
driving fasteners. Never carry the tool with
finger on trigger, the tool is able to fire a
fastener.
Always wear eye protection. Operator and
others in the work area should always wear
ANSI-approved safety goggles with side
shields. Eye protection is used to guard
against flying fasteners and debris, which
may cause severe eye injury.
Always wear hearing protection when
using the tool. Prolonged exposure to high
intensity noise may cause hearing loss.
Use safety equipment. A dust mask, non-
skid safety shoes and a hard hat must be
used for the applicable conditions. Wear a
full face shield if you are producing metal
filings or wood chips.
Dress properly. Do not wear loose clothing
or jewelry. Contain long hair. Keep your long
hair, clothing, and gloves away from moving
parts. Loose clothes, jewelry, or long hair
can be caught in moving parts.
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use tool while tired or
under the influence of drugs, alcohol, or
medication. A moment of inattention while
operating the tool may cause serious injury.
Avoid unintentional firing. Keep fingers
away from trigger when not driving
fasteners, especially when connecting the
tool to the air supply.
Keep proper footing and balance at all
times. Proper footing and balance enables
better control of the tool in unexpected
situations.
PERSONAL SAFETY
ADJUSTING THE EXHAUST
LOADING FASTENERS
UNLOADING FASTENERS
CLEARING JAMS
NON-MARRING PAD
DEPTH ADJUSTMENT
SETTING THE AIR PRESSURE
FIRING THE TOOL
WORK CONTACT ELEMENT (WCE)
P3
P6
P6
P7
P7
P8
P8
P8
P9
P9
P9
P9
P10
P11
P12
P12
P13
GENERAL SAFETY RULES
UNPACKING
FEATURES
OPERATION
MAINTENANCE
RECOMMENDED HOOKUP
TROUBLESHOOTING
WEARABLE PARTS
WARRANTIES
This product can expose you to
chemicals including lead, which is
known to the State of California to
cause cancer and birth defects or
other reproductive harm. For more
information, go to
www.P65Warnings.ca.gov.
MODEL: PL31
MODEL: PL31
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42

Freeman PE1GCCK Manuel utilisateur

Catégorie
Cloueuse
Taper
Manuel utilisateur

dans d''autres langues