Danby DDR060BDCWDB Le manuel du propriétaire

Catégorie
Déshumidificateurs
Taper
Le manuel du propriétaire

Ce manuel convient également à

OWNER’S USE AND CARE GUIDE
GUIDE D’UTILISATION ET D'ENTRETIEN
02'(/02'Ê/(
DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9
DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840
PORTABLE DEHUMIDIFIER
DESHUMIDIFICATEUR PORTATIF
DESHUMIDIFICADOR PORTÁTIL
DDR060BDCWDB / DDR070BDCWDB
DDR060BDWDB / DDR070BDWDB
2016.11.08
DO NOT RETURN THIS UNIT TO THE RETAILER
WITHOUT FURTHER INSTRUCTIONS
Dear valued customer, we hope your Danby product purchase fulfills all
your requirements. Your satisfaction is our priority!
Please contact us at our toll free consumer service number for any inquiries
you may have about your new unit.
NE PAS RETOURNER CET APPAREIL CHEZ LE
DÉTAILLANT SANS CONSIGNES SUPPLÉMENTAIRES
Cher(ère) client(e) important(e), nous espérons que votre produit Danby
répond à tous vos besoins. Votre satisfaction est notre priorité!
Veuillez nous contacter au numéro gratuit de service après-vente, si
vous avez des questions quelconques à propos de votre nouvel appareil.
NO DEVUELVA ESTA UNIDAD A LA TIENDA SIN
INSTRUCCIONES ADICIONALES
Estimado cliente, esperamos que el producto Danby que ha comprado
satisfaga completamente sus necesidades. Su satisfacción
es nuestra prioridad!
Por favor, contáctenos gratuitamente a nuestro número de Servicio al
Cliente para cualquier pregunta que tenga sobre su nuevo electrodoméstico.
1-800-263-2629
(1-800-26-DANBY)
Danby 28.08.2014
TO OBTAIN WARRANTY SERVICE YOU MUST PROVIDE A VALID PROOF OF
PURCHASE. PLEASE STAPLE YOUR RECEIPT TO THIS PAGE FOR FUTURE
REFERENCE.
POUR OBTENIR LE SERVICE SUR GARANTIE, VOUS DEVEZ FOURNIR UNE
PREUVE D’ACHAT VALIDE. VEUILLEZ AGRAFER VOTRE REÇU À CETTE PAGE
POUR RÉFÉRENCE FUTURE.
PARA OBTENER SERVICIO DE GARANTÍA, DEBE PROVEER UN RECIBO ORIG-
INAL. POR FAVOR ENGRAPE SU RECIBO A ÉSTA PÁGINA EN CASO QUE
NECESITE HACER UN RECLAMO.
This product is factory equipped with a power supply cord that has a three-pronged grounded plug. It must
be plugged into a mating grounding type receptacle in accordance with the National Electrical Code and
applicable local codes and ordinances. If the circuit does not have a grounding type receptacle, it is the
responsibility and obligation of the customer to exchange the existing receptacle in accordance with the
National Electrical Code and applicable local codes and ordinances. The third ground prong should not,
under any circumstances, be cut or removed. Never use the cord, the plug or the appliance when they show
any sign of damage. Do not use your appliance with an extension cord unless it has been checked and test-
ed by a quali ed electrician or electrical supplier.
IMPORTANT - GROUNDING METHOD
Ce produit arrive d’origine avec un cordon d’alimentation équipé d’une prise à trois ches. Il doit être
branché dans une prise avec une che de mise à la terre en conformité avec le Code national de l’électricité
et les codes et règles locaux applicables. Si la prise murale n’a pas de mise à la terre, il est de la
responsabilité et l’obligation du client de changer la prise existante pour la rendre conforme au Code
national de l’électricité et aux codes et règles locaux applicables. La che de mise à la terre ne doit pas, en
aucune circonstance, être coupée ou retirée. Si vous apercevez des signes de dommage, n’utilisez jamais le
cordon d’alimentation, la prise ou l’appareil. N’utilisez jamais l’appareil avec une rallonge sauf si elle a été
véri ée et testée par un électricien quali é ou un fournisseur de matériel électrique.
IMPORTANT - MÉTHODE POUR LA MISE À LA TERRE
Este producto viene equipado con un cable eléctrico que tiene un enchufe de tres patas conexión a tierra.
Este debe colocarse en una toma de corriente con conexión a tierra de acuerdo con el Código nacional de
electricidad y códigos y ordenanzas locales correspondientes. Si el circuito no cuenta con una toma de
corriente con conexión a tierra, es responsabilidad y obligación del cliente sustituir la toma de corriente
actual de acuerdo con el Código nacional de electricidad u códigos u ordenanzas locales correspondientes.
Bajo ninguna cicunstancia se debe cortar o eliminar la tercera pata de conexión a tierra. Nunca utilice el
cable, el enchufe o el artefacto cuando muestre un signo de daño visible. No utilice el artefacto con una
extensión salvo que un proveedor eléctrico o electricista cali cado la inspeccione y la pruebe.
IMPORTANTE- MÉTODO DE CONEXIÓN A TIERRA
PORTABLE DEHUMIDIFIER
Owner’s Use and Care Guide .................................................1-13
• Welcome
• Important Safety Information
• Features
• Installation Instructions
• Operation Instructions
• Care and Maintenance
• Troubleshooting
• Warranty
DÉSHUMIDIFICATEUR PORTATIF
Guide d’utilisation et d’entretien..............................................14-27
• Bienvenue
• Consignes de sécurité importantes
• Caractéristiques
• Consignes d’installation
• Consignes d’utilisation
• Soins et entretien
• Dépannage
• Garantie
DESHUMIDIFICADOR PORTÁTIL
Guía del utilización y cuidado para el propietario...................28-41
• Bienvenido
• Instrucciones de seguridad importantes
• Instrucciones d’instalación
• Características
• Instrucciones operadoras
• Cuidado y maintenimiento
• Solucion sugerida
• Garantía
CONTENTS
CAUTION:
Read and follow all safety rules and operating
instructions before rst use of this product.
PRÉCAUTION :
Veuillez lire attentivement les consignes de
sécurité et les instructions d’utilisation avant
l’utilisation initiale de ce produit.
TABLE DES MATIÈRES
ÍNDICE
PRECAUCIÓN:
Veuillez lire attentivement les consignes de
sécurité et les instructions d’utilisation avant
l’utilisation initiale de ce produit.
Model Modèle Modelo
DDR060BDCWDB / DDR070BDCWDB / DDR060BDWDB / DDR070BDWDB
WARNING
Improper connection of the grounding plug can
result in risk of re, electric shock and/or injury to
persons associated with the appliance. Check with
a quali ed service representative if in doubt that
the appliance is properly grounded.
AVERTISSEMENT
Une che de mise à la terre mal branchée peut
entraîner un risque d’incendie, de choc électrique
ou de blessures aux personnes qui utilisent
l’appareil. Si vous n’êtes pas certain que l’appareil
est correctement mis à la terre, consultez un
préposé du service quali é.
ADVERTENCIA
El conectar indebidamente el enchufe de conexión
a tierra puede crear riesgos de incendio, descarga
eléctrica y/o oscasionar lesiones a las personas
que usen el aparato. Si tiene dudas sobre la
debida conexión a tierra del aparato, consulte un
representante de servicios cali cado.
1
Welcome
Welcome to the Danby family. We are proud of our quality products, and we believe in dependable service, like you will
find in this Owner’s Use and Care Guide, and like you will receive from our friendly customer service department. Best
of all, you will experience these values each and every time you use your Danby appliance. That is important, because
your new appliance will be a part of your family for a long time.
Note the information below; you will need this information to obtain service under warranty.
To receive service, you must provide the original receipt.
Model Number:
Serial Number:
Date of Purchase:
NEED HELP?
Before you call for service, here are a few things you can do to help
us serve you better:
Read this Owners Use and Care Guide:
It contains instructions to help you use and maintain your
appliance properly.
If you received a damaged appliance:
Immediately contact the retailer (or builder) that sold you the
appliance.
Save time and money:
Check the Troubleshooting section at the end of the guide before call-
ing. This section helps you solve common problems that may occur.
If you do need service, you can relax, knowing help is only a phone
call away.
1-800-26-
(1-800-263-2629)
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
NOTE
The WARNING instructions issued in this manual are not meant to cover all possible conditions and situations that may
occur. Person(s) installing, maintaining, or operating the appliance must exercise caution and care. Failure to install,
maintain, and/or operate the equipment according to the manufacturer’s instructions may result in conditions which can
produce personal injury and damage to your unit and/or property damage. Contact your dealer, service agent, and/or the
manufacturer about any problems or conditions you do not fully understand. For Danby Consumer Service call (1-800-
263-2629).
To reduce the risk of re, electric shock, or personal injury, all wiring and grounding must conform with the latest edition of
Local and National Electrical codes.
• It is the customer’s responsibility to have the wiring and fuses checked by a quali ed electrician to make sure adequate
electrical power is available.
• This appliance is designed to operate on an effectively grounded, separately branched, polarized, 3-wire, 120 Volt
60 Hertz (alternating current) circuit protected by a 15 ampere fuse, equivalent fuse or circuit breaker. The three-prong
grounding plug on the power cord should be plugged directly into the aforementioned receptacle rated 110/120 V.A.C.
• Do not connect the dehumidi er to a multiple socket outlet that is also being used for other electrical appliances.
FOR YOUR SAFETY: To reduce the risk of re or explosion, do not store or use gasoline or other ammable va-
pors or liquids in the vicinity of this or any other appliance.
ELECTRICAL REQUIREMENTS
Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a quali ed
electrician or serviceperson if you are in doubt as to whether your appliance outlets are properly grounded.
• This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electrical
shock by providing a path of least resistance for electrical current. This appliance is equipped with a cord that has an
equipment-grounding conductor and 3 prong grounding plug. The plug must be connected into an outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
• Do not modify the plug provided with this appliance. If it will not t the outlet, have a proper outlet installed by a quali ed
electrician.
• If the household electrical supply does not meet the above speci cations, or if you are not sure your home has an
effective ground, have a quali ed electrician or your local electrical utility company check it and correct any problems.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
2
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAFETY PRECAUTIONS
When using this dehumidi er, always follow basic safety precautions, including the following:
• Use this appliance only for its intended purpose as described in this Owner’s Manual.
• Do not remove the Styrofoam in the oat which is located in the bucket.
• This dehumidi er must be properly installed and grounded as described in this manual before it is used.
• Never operate this dehumidi er in an area that is likely to accumulate standing water. If this condition develops, for your
safety disconnect the power supply before stepping into the water.
• Never unplug your dehumidi er by pulling on the power cord. Always grip the plug rmly and pull straight out from the
receptacle.
• Replace immediately all electric service cords that have become frayed or otherwise damaged. A damaged power
supply cord must be replaced with a new power supply cord obtained from the manufacturer and not repaired. Do not
use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.
• If the receptacle does not match the plug, the receptacle must be changed out by a quali ed electrician.
• Turn the dehumidi er OFF and unplug it before cleaning.
• For your safety, do not store or use combustible materials, gasoline or other ammable vapors or liquids in the vicinity of
this or any other appliance.
• All dehumidi ers contain refrigerants, which under federal law must be removed prior to product disposal. If you are
disposing of a product with refrigerants, check with the company handling disposal about what to do. Check for
local regulatory compliance regarding the approved and safe disposal of this appliance.
• Do not use outdoors.
• This dehumidi er is intended for indoor residential applications only. This dehumidi er should not be used
for commercial or industrial applications.
SAVE THESE INSTRUCTIONS
3
Installation Instructions
• Select a suitable location, making sure you have easy access to an electrical outlet (avoid the use of extension cords).
• Make sure there are no obstructions restricting air ow through the front air intake grill. Maintain a minimum clearance
of at least 20 cm (8”) between adjacent walls and the back of the unit, to allow for proper air circulation and maximum
ef ciency. To achieve maximum operating ef ciency from your dehumidi er, the recommended (room ambient) operating
temperatures should be between 5°C (41°F) and 35°C (95°F).
• It is important to remember the ef ciency of a dehumidi er will be affected/in uenced by the rate at which new humid
air (moisture) is allowed to in ltrate the same space/area. To maintain ef ciency, the dehumidi er must be operated in an
enclosed area. Keep all doors and windows closed.
• Do not use this unit outdoors. This dehumidifer is intended for indoor residential applications only. This dehumidi er
should not be used for commercial or industrial applications.
• Place the dehumidi er on a smooth, level oor strong enough to support the unit with a full bucket of water.
• Place the unit where it has access to an electrical outlet.
• This unit has 4 castors which can move freely. Do not force castors to move over carpet, and refrain from moving the
unit with water in the bucket (the unit may tip over and spill water). Protect wood oors from possible spillage or
scratches when moving unit.
• Remove accessory bag from bucket and store it in a safe place.
LOCATION
FEATURES
4
1
3
4
5
2
6
10
9
7
8
11
1. Control Panel
2. Front Panel
3. Water Bucket
4. Water Level Window
5. Carrying Handle (both sides)
6. Continuous Drain Hose Outlet
7. Air Outlet Grill
8. Air Filter
9. Power Cord Buckle
10. Caster
11. Power Cord and Plug
Operating Instructions
NOTE: The control panel of the unit you purchased may be slightly different depending on the model number.
CONTROL PANEL INSTRUCTIONS
CASTOR INSTALLATION (some models)
Castor installation is recommended to avoid damage to oors.
1. Remove the castors from the bucket of the dehumidi er.
2. Position the dehumidi er on its side.
3. Locate the arrow on the bottom of the dehumidi er and insert the castor
according to the arrow direction.
4. Slide the castor in as far as it will go. The castor will snap into place.
5. Repeat steps 1 to 4 for the other 3 castors.
5
When you push the button to change operation modes, the unit will make a beeping sound to indicate that it is
changing modes.
1. Continue Button: Press to activate the continuous dehumidifying operation.
2. Filter Button: This product has a check lter feature that is a reminder to clean the air lter for more ef cient oper-
ation. The check lter light will illuminate after 250 hours of operation. To reset this function after cleaning the lter,
press the reset lter button and the light will go off.
3. Fan button: Controls the fan speed. Press to select either high (turbo) or normal fan speed. Set the fan control to
high for maximum moisture removal. When the humidity has been reduced and quiet operation is preferred, set the
fan control back to normal.
4. Power Button: Press to turn the dehumidi er on or off.
5. ( / ) Buttons: The humidity level can be set within a range of 35% RH (Relative Humidity) to 85% RH in 5%
increments using these buttons. For drier air, press the ( ) button and set to a lower percentage value (%). For more
damp air, press the ( ) button and set a higher percentage value (%).
6. Timer Button: Press to initiate the auto-start and auto-stop feature. Set a start or stop time from 0.0 to 24 hours using
the ( ) and ( ) keys.
7. Display: Shows the actual (± 5% accuracy) room humidity level in a range of 30% RH to 90% RH. Otherwise, dis-
plays selection when programming humidity or timer.
8. Comfort: This function allows you to be comfortable by automatically adjusting the humidity level with the uctuating
room temperatures. The humidity level cannot be adjusted in this setting.
Note: The fan does not shut off the moment you remove the bucket, the fan will shut off after 2-3 minutes.
1
6
3
2
7
4
5
8
10
9
Operating Instructions
TIMER FUNCTIONS
Follow these steps to program the Auto-on or Auto-off feature using the control panel:
Auto-off:
1. When the unit is on, and the TIMER button is pressed, the timer off indicator light illuminates to indicate that the auto-
off program is initiated.
2. Press or hold the UP or DOWN button to change the ‘Auto’ time by 0.5 hour increments, up to 10 hours (then at 1 hour
increments up to 24 hours). The unit control will count down the time remaining until start.
3. Within 5 seconds of setting auto-off time, press the TIMER button again to complete the auto-off program.
Auto-on:
4. When the unit is off, and the TIMER button is pressed, the auto-on program is initiated. Set the auto-on time as in step
2 above. Within 5 seconds of setting auto-on time, press the TIMER button again to complete the auto-on program.
NOTE: When the auto-on and auto-off times are set, within the same program sequence, TIMER ON OFF indicator lights
illuminate indicating that both ON and OFF times are now programmed.
NOTE: Turning the unit ON or OFF at any time, changing the on/off timer setting to 0.0, and a P2 error code will cancel the
Auto-on/off functions.
6
INDICATOR LIGHT FUNCTIONS
AS - Humidity sensor error -- Unplug the unit and plug it back in. If error repeats, call for service.
ES - Temperature sensor error -- Unplug the unit and plug it back in. If error repeats, call for service.
P2 (or Eb) - Bucket is full or the bucket is not in correct position -- Empty the bucket and/or adjust it to the proper position.
EC - Please ensure that the room ambient temperature matches the recommended operating temperature for the unit,
5°C (41°F) - 35°C (95°F). If the temperature is within this range, call for service.
E3 - Unit Malfunction, unplug the unit and plug it back in. If error repeats, call for service.
ERROR CODES
Note: Depending on the humidity conditions of the surrounding environment, the dehumidi er may not start automatically
when the “on/off” button is pressed (see dehumidifying mode instructions for details).
9. Bucket Full Indicator Light: When the bucket is full and/or incorrectly positioned inside the cabinet, the bucket full
light will turn on and remain on until the bucket is emptied and/or correctly re-positioned. This condition will result in the
immediate shut down of the dehumidifying system (both compressor and fan motor operation are terminated). This is a
safety feature. When the bucket is emptied and/or correctly re-positioned, the dehumidi er will resume operation automat-
ically. NOTE: It may take several minutes before operating conditions resume.
10. Auto-defrost: When frost builds on the evaporator coils, the compressor will cycle off and the fan will continue to run
until the frost disappears.
NOTE:
Memory Setting: Each time the unit is disconnected / re-connected and/or in the event of a power failure, the electronic
circuit board automatically defaults to the last program setting that was used. After the unit has stopped, it may take sev-
eral minutes before operating conditions resume.
Auto-restart: If the unit shuts off unexpectedly due to a power outage, it will restart with the previous function settings
automatically when the power resumes.
WATER TANK OPERATION
The water tank holds accumulated condensed water and, by means of a safety switch, controls both the water level and
operation of the dehumidi cation process.
When the water tank is full and/or accidentally displaced inside the cabinet, the oat switch actuator (inside the tank)
breaks contact with the safety switch. This condition results in the immediate shut down of the compressor and fan motor
system, preventing moisture from being condensed.
Note: On some models, the fan will continue to run for approximately 2-3 minutes after the unit has stopped and
the bucket has been removed. As a result, water may drip from the tray onto the base of the unit, and then onto
the oor. Please ensure that you protect your wood and carpet from such leakage.
IMPORTANT
Never tamper with or attempt to defeat the water level (safety) oat switch system. Proper installation
of the water tank is crucial in maintaining reliable dehumidi er operation.
Operating Instructions
7
DEHUMIDIFYING
Dehumidifying is a means of removing moisture from the air. A dehumidi er will help to protect your home and valued
possessions from damage due to swelling caused by moisture in the air. Essentially a dehumidi er removes moisture from
air as moist air passes over a dehumidifying (evaporator) coil. Moisture is condensed on the evaporator coil, drained, and
collected inside an internal (removable) water tank located at the front of the unit. The exhausted air being returned into
the room environment is elevated several degrees causing the surrounding air temperature to increase (slightly). This
process also contributes to lowering the relative humidity of the surrounding air.
Note: For optimal performance, ensure that the unit is set at least 10% lower than the relative humidity level. It is normal
for the humidity to vary by 5% above or below the set humidity. It is recommended that in normal conditions, the humidity
be set at 40-45%.
DEHUMIDIFYING MODE INSTRUCTIONS
When the unit is rst connected to the electrical outlet, the power light will not light up until the “on/off” button is pressed.
When the “on/off” button is pressed, the power light turns on and the dehumidi er automatically defaults to:
Display: Current ambient room humidity (RH%)
Humidity Setting: 60% RH
Fan Speed: High.
Note: Depending on humidity conditions of the surrounding environment, the dehumidi er may not start automatically
under the default setting (this is an indication that the humidity level of the surrounding environment is lower than the
“default” setting of 60% RH). Therefore, it may be necessary to scroll through each of the different dehumidi er settings
35%-55% until the “humidistat” (sensor) recognizes conditions that will allow the unit to operate.
Dehumidifying Mode Selection:
1. The unit enters dehumidify mode when the ON/OFF button is pressed.
2a. Press the / buttons to select a desired RH operating value (35%-85%).
OR
2b. Press the continuous button. When continuous mode is selected, the humidistat (sensor) will be by-passed and the
compressor will operate non-stop regardless of humidity conditions.
Fan Speed Selection:
3. You can choose a fan speed (normal/turbo) using the keypad. The speed you select is identi ed by the (illuminated)
indicator light located directly above the selection made.
Your dehumidi er features a removable Air Filter. This lter is located at the front of the unit (behind the air intake grill)
directly above the water tank compartment. The air lter plays an important role in helping to reduce (minimize) dust/
dirt particles from the surrounding environment. A blocked/clogged air lter reduces air intake, impacting negatively on
operating ef ciency. To maintain maximum operating ef ciency, the lter must be checked and cleaned regularly (every 2
weeks). More frequent cleaning may be required depending upon indoor air quality.
IMPORTANT: Never operate the unit without the air lter in place.
AIR FILTER REMOVAL:
1. Pull lter outwards.
2. Clean the lter thoroughly using a vacuum cleaner or wash using lukewarm water and mild detergent. Dry thoroughly
before re-installing.
3. To re-install the air lter, slide the lter back inside the tracks.
AIR FILTER
8
Operating Instructions
Note: All the pictures in the manual are for explanatory purposes only. The actual shape of the unit you purchased may be
slightly different, but the operation and functions are the same.
There are two ways to remove collected water:
1. Use the bucket
When the unit is off and the bucket is full, the unit will beep 8 times, the
bucket full indicator light will ash, and the digital display shows P2.
When the unit is on and the bucket is full, the compressor turns off and
the fan turns off after drying the water off the condenser for 30 seconds.
The unit will then beep 8 times and the bucket full indicator light will
ash, and the digital display shows P2.
To empty the full bucket, slowly pull out the bucket. Grip the left and
right handles securely, and carefully pull it straight out so water does
not spill. Do not put the tank on the oor because the bottom of the
bucket is uneven. Otherwise the bucket will fall and cause water to spill.
Discard the water and return the bucket to the unit. The bucket must
be placed and properly positioned for the dehumidi er to operate. The
machine will restart when the bucket is restored in its correct position.
Note: When you remove the bucket, do not touch any parts inside of
the unit. Doing so may damage the product. Be sure to push the bucket
gently all the way into the unit. Banging the bucket against anything or
failing to push it in securely may cause the unit not to operate. When
you remove the bucket, if there is some water inside the unit you must
dry it. The power button ashes when the bucket is not properly in
place.
2. Continuous draining:
Water can be automatically emptied into a oor drain by attaching the
unit to an ID 5/16” water hose with a ID:M=1 female threaded end (not
included, a standard garden hose works well). Install the drain hose.
Remove the plastic cover from the back drain outlet of the unit and set it
aside.
Install the female threaded end of the water hose into the adaptor A
(see B4), then lead the water hose to the oor drain or a suitable drain-
age facility. Make sure the hose is secure so there are no leaks. Direct
the hose toward the drain, making sure that there are no kinks that will
stop the water from owing. Place the end of the hose into the drain and
make sure the end of the hose is level or declining to let the water ow
smoothly. Select the desired humidity setting and fan speed on the unit
for continuous draining to start.
Operating Instructions
REMOVING COLLECTED WATER
9
1. Pull out the bucket a little.
2. Hold both sides of the
bucket with even strength and
pull it out from the unit.
3. Pour the water out.
Remove the plastic
cover by turning it
counter-clockwise.
Drain hose
If the pump hose drops when you
remove the bucket, ensure it is reinstalled properly.
Operating Instructions
CAUTION
1. DO NOT pull on the power cord to avoid breakage, potential danger or
injury.
2. DO NOT use insecticide/ repellents, oil or paint/spray paint around the
machine, these might cause damage to plastic parts or start a re.
3. DO NOT place the unit on uneven ground to avoid shaking, noise and
water leakage.
4. Always keep the unit 20 cm or more from the wall to dissipate heat
properly.
5. DO NOT drop anything into the machine.
6. Close all windows to allow for the maximum possible ef ciency for
removing moisture.
7. Keep the machine away from any type of heat source.
8. When moving or putting in storage, do not place the dehumidi er on its
side or upside down.
1.
2.
3.
4.
5.
6.
7.
8.
10
Care and Maintenance
IMPORTANT
1. Be sure to unplug the unit before cleaning or servicing.
2. Do not use gasoline, paint thinner or other chemicals to clean the
unit.
3. Do not wash the unit directly under a tap or using a hose. It may
cause electrical damage.
4. If the power cord is damaged, contact the service depot immediately.
CLEANING
11
1. Clean the grill and case
Use water and a mild detergent. Do not use bleach or abrasives. Do
not splash water directly onto the main unit. Doing so may cause an
electric shock, cause the insulation to deteriorate, or cause the unit
to rust. The air intake and outlet grills become dirty easily, so use a
vacuum attachment or brush to clean.
2. Clean the bucket
Every few weeks, clean the bucket to prevent growth of mold, mil-
dew and bacteria. Partially ll the bucket with clean water and add a
small amount of mild detergent. Swish it around in the bucket, empty
and rinse. Note: Do not use a dishwasher to clean the bucket. After
cleaning, the bucket must be placed and properly positioned for the
dehumidi er to operate.
3. Clean the air lter
Remove and clean the lter every two weeks based on normal oper-
ating conditions.
Caution: DO NOT operate the dehumidi er without a lter be-
cause dirt and lint will clog it and affect performance.
4. When not using the unit for long periods of time
After turning the unit off, wait one day before emptying the bucket.
Clean the main unit, water bucket and air lter. Cover the unit with a
plastic bag. Wrap the cord around the power cord buckle. Store the
unit upright in a dry, well ventilated place.
Power cord buckle
Troubleshooting
Occasionally, a minor problem may arise, and a service call may not be necessary- use this troubleshooting guide for a
possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby’s Toll Free Num-
ber for assistance.
Tel: 1-800-26 - (1-800-263-2629)
PROBLEM POSSIBLE CAUSE SOLUTION
Dehumidi er does
not start
• The dehumidi er is un-
plugged
The fuse is blown/circuit
breaker is tripped
• Dehumidi er has reached
its preset level or bucket is
full
Bucket is not in the proper
position
• Power failure
Make sure the plug is pushed completely into the outlet
Check the house fuse/circuit breaker box and replace the fuse or
reset the breaker
The unit turns off automatically when either condition occurs.
Change to a lower setting or empty the bucket and replace prop-
erly
The bucket must be in place and securely seated for the unit to
operate.
There is a protective time delay (up to 3 minutes) to prevent trip-
ping of the compressor overload. For this reason, the unit may
not start normally for 3 minutes after it is turned back on.
Dehumidi er does
not dry the air as it
should
Did not allow enough time
to remove the moisture
• Air ow is restricted
• Dirty lter
The humidity control may
not be set low enough
Doors and windows may
not be closed tightly
Clothes dryer may be blow-
ing moisture-laden air into
the room
Room temperature is too
low
• When rst installed, allow at least 24 hours to maintain the de-
sired dryness
Make sure there are no curtains, blinds or furniture blocking the
front or back of the dehumidi er. See the “Location” section.
See the “Air lter” section
For drier air, press the button and set to a lower percent value
(%)
Check that all doors, windows and other openings are securely
closed
Install the dehumidi er away from the dryer. The dryer should be
vented to the outside.
Moisture removal is best at higher room temperatures. Lower
room temperatures will reduce the moisture removal rate. Modes
are designed to be operated at temperatures above 5°C (41°F)
Dehumidi er runs
too much but does
not collect water
Need to reset controller Set to 40% RH. Allow bucket to ll and then empty bucket. Adjust
controller to desired % RH.
Dehumidifer runs
too much collects
water
Area to be dehumidifed is
too large
Doors and windows are
open
The capacity of your dehumidi er may not be adequate
Close all doors and windows
Frost appears on
the coils
Unit has been recently
turned on, or room tempera-
ture is below 5°C (41°F)
This is normal. Frost will usually disappear within 60 minutes.
See the “Defrost” section
Controls cannot be
set
The compressor will turn
off and the fan will auto-
matically continue to run for
approx. 3 minutes at a xed
setting
This is normal. Wait approximately 3 minutes and set the fan as
desired.
Fan noise Air is moving through the
dehumidi er
This is normal
Water on oor Hose connection may be
loose
Bucket used to collect wa-
ter, but the hose is attached
Check the hose connection. See “Continuous Drain” section
Disconnect the hose if using the bucket to collect water, see
“Continuous Drain” section.
12
LIMITED IN-HOME APPLIANCE WARRANTY
This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating
conditions intended by the manufacturer.
This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter
“Danby”) or by an authorized distributor of Danby, and is non-transferable.
TERMS OF WARRANTY
Plastic parts, are warranted for thirty (30) days only from purchase date, with no extensions provided.
First Year
During the rst twelve (12) months, any functional parts of this product found to be defective, will be repaired or replaced, at warrantor’s
option, at no charge to the ORIGINAL purchaser.
To obtain
Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an Authorized Service Depot. Any app liance
Service
requiring service outside the limited boundaries of “In Home Service” , it will be the consumer’s responsibility to transport the appliance (at
their own expense) to the original retailer (point of purchase) or a service depot for repair. See “Boundaries of In Home Serv ice” below.
Contact your dealer from whom your unit was purchased, or contact your nearest authorized Danby service depot, where service
must be performed by a qualied service technician.
If service is performed on the units by anyone other than an authorized service depot, or the unit is used for commercial appli cation, all
obligations of Danby under this warranty shall be void.
Boundaries of
If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest service center your unit must be
In Home Service
delivered to the nearest authorized Danby Service Depot, as service must only be performed by a technician qualied and certif ied for
warranty service by Danby. Transportation charges to and from the service location are not protected by this warranty and are t he
responsibility of the purchaser.
Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other c ontents of this appliance, whether due
to any defect of the appliance, or its use, whether proper or improper.
EXCLUSIONS
Save as herein provided, Danby, there are no other warranties, conditions, representations or guarantees, express or implied, m ade or intended by Danby or its
authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditio ns, representations or guarantees
under any Sale of Goods Act or like legislation or statue is hereby expressly excluded. Save as herein provided, Danby shall no t be responsible for any damages
to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction o f the unit and by the purchase of
the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or propert y caused by the unit.
GENERAL PROVISIONS
No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:
1) Power failure.
2) Damage in transit or when moving the appliance.
3) Improper power supply such as low voltage, defective house wiring or inadequate fuses.
4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating con ditions
(extremely high or low room temperature).
5) Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).
6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, oods etc.
7) Service calls resulting in customer education.
8) Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for out door application).
Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event warranty service is required, present this document to our
AUTHORIZED SERVICE DEPOT.
Danby Products Limited
PO Box 1778, Guelph, Ontario, Canada N1H 6Z9
Telephone: (519) 837-0920 FAX: (519) 837-0449
Danby Products Inc.
PO Box 669, Findlay, Ohio, U.S.A. 45840
Telephone: (419) 425-8627 FAX: (419) 425-8629
04/09
1-800-263-2629
Warranty Service
In-home
If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest
service center your unit must be delivered to the nearest authorized Danby Service Depot, as service
must only be performed by a technician qualified and certified for warranty service by Danby. Transpor-
tation charges to and from the service location are not protected by this warranty and are the responsi-
bility of the purchaser.
During the first twenty four (24) months, any functional parts of this product found to be defective, will be
repaired or replaced, at warrantor’s option, at no charge to the ORIGINAL purchaser.
Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an Authorized
Service Depot. Any appliance requiring service outside the limited boundaries of “In Home Service” ,it
will be the consumer’s responsibility to transport the appliance (at their own expense) to the original
retailer (point of purchase) or a service depot for repair. See “Boundaries of In Home Service” below.
Contact your dealer from whom your unit was purchased, or contact your nearest authorized Danby
service depot, where service must be performed by a qualified service technician. If service is performed
on the units by anyone other than an authorized service depot, or the unit is used for commercial
application, all obligations of Danby under this warranty shall be void.
First 24 months
To obtain
service
Boundaries of
in-home service
LIMITED CARRY-IN APPLIANCE WARRANTY
This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is
used under the normal operating conditions intended by the manufacturer.
This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or
Danby Products Inc. (U.S.A.) (hereafter “Danby”) or by an authorized distributor of Danby, and is non-transferable.
TERMS OF WARRANTY
Plastic parts, are warranted for thirty (30) days only from purchase date, with no extensions provided.
Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other
contents of this appliance, whether due to any defect of the appliance, or its use, whether proper or improper.
EXCLUSIONS
Save as herein provided, by Danby, there are no other warranties, conditions, representations or guarantees, express or
implied, made or intended by Danby or its authorized distributors and all other warranties, conditions, representations or
guarantees, including any warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation
or statute is hereby expressly excluded. Save as herein provided, Danby shall not be responsible for any damages to persons
or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit
and by the purchase of the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for
damages to persons or property caused by the unit.
GENERAL PROVISIONS
No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:
1) Power failure.
2) Damage in transit or when moving the appliance.
3) Improper power supply such as low voltage, defective house wiring or inadequate fuses.
4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating
conditions (extremely high or low room temperature).
5) Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).
6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods etc.
7) Service calls resulting in customer education.
8) Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for
outdoor application). Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event
warranty service is required, present this document to our AUTHORIZED SERVICE DEPOT.
Warranty Service
Carry-In
Danby Products Limited
PO Box 1778, Guelph, Ontario, Canada N1H 6Z9
Telephone: (519) 837-0920 FAX: (519) 837-0449
Danby Products Inc.
PO Box 669, Findlay, Ohio, U.S.A. 45840
Telephone: (419) 425-8627 FAX: (419) 425-8629
1-800-263-2629
07/14
14
Merci d’avoir choisi Danby
Nous savons que vous êtes excité. Nous sommes aussi! Cependant, le plus que vous vous familiarisez avec votre
nouvel appareil, le mieux va être votre expérience. Nous suggérons donc de lire ces instructions avant connecter votre
nouvel appareil. Ce manuel contient des informations opérationnel important qui vous aidera à faire un usage pleine de les
caractéristiques techniques disponibles dans votre appareil Danby. Le manuel contient également des informations conçu
pour améliorer la fiabilité et la sécurité de votre appareil ainsi que des conseils pour le maintien, pour vous assurez des annees
de bonheur.
Se il vous plaît visitez www.danby.com pour accéder les outils libre-service, FAQ et plus encore. Si jamais vous avez besoin
d'aide supplémentaire, s’il vous plaît appelez 1-800-26-Danby (1-800-263-2629). S’il vous plaît ayez votre facture d’achat, le
numéro de modèle, et le numéro de série près durant l'appel.
Remarque : Ces renseignements seront nécessaires si votre appareil a besoin d’entretien ou pour les demandes de
renseignements généraux. Pour bénéficier d’une opération de maintenance ou de dépannage, le reçu
original sera exigé.
Numéro de modèle :
Numéro de serie :
Date d’achat :
BESOIN D’ASSISTANCE ?
Veuillez trouver quelques conseils avant de faire appel à nos services, cela
nous aidera à mieux vous servir :
Lisez ce guide :
Il comprend des instructions pour l’utilisation et l’entretien adapté de votre
appareil.
Si votre nouvel appareil est endommagé :
Contactez immédiatement le revendeur (ou le fabricant).
Gagnez du temps et de l’argent :
Avant de faire appel à nos services, consultez à nouveau la section
« Dépannage ». Cette section vous aidera à résoudre des problèmes courants.
Si une réparation est nécessaire, ne vous inquiétez pas, la solution est au
bout du fil.
Tel: 1-800-26-
(1-800-263-2629)
15
Consignes de sécurité importantes
LISEZ TOUTE L’INFORMATION DE SÉCURITÉ AVANT UTILISATION
REMARQUE
Les consignes d'AVERTISSEMENT publiées dans ce manuel ne sont pas supposées couvrir toutes les conditions et situ-
ations éventuelles qui peuvent se produire. La ou les personnes qui installent, entretiennent ou utilisent l’appareil doivent
faire preuve de précaution et de prudence. Si vous n’installez pas, n’entretenez pas ou n’utilisez pas l’appareil conformé-
ment aux instructions du fabricant, il peut se produire des situations présentant des risques de blessures corporelles, de
dommages à l’unité ou autres dommages matériels. Communiquez avec votre concessionnaire, votre représentant ou le
fabricant en cas de problèmes ou de conditions que vous ne comprenez pas bien. Pour parler au service à la clientèle
de Danby, composez le (1-800-263-2629).
A n de réduire le risque d'incendie, de choc électrique ou de blessures, tout le câblage et toute la mise à la masse
doivent se conformer à la dernière édition des codes d'électricité locaux et nationaux.
• Il incombe au client de faire véri er le câblage et les fusibles par un électricien quali é pour s'assurer que l'alimentation
électrique disponible est appropriée.
• Cet appareil est conçu pour fonctionner avec un circuit bien mis à la masse, à branchement séparé, polarisé, à trois ls
de 120 volts et 60 hertz (courant alternatif). Ce circuit doit être protégé par un fusible de 15 ampères, un fusible équivalent
ou un coupe-circuit. La che à trois broches mise à la masse sur le cordon d'alimentation doit être branchée directement
dans la prise susmentionnée de puissance nominale 110/120 V (c.a.).
• Ne branchez pas le déshumidi cateur à une prise femelle multiple qui sera également utilisée pour d'autres appareils
électriques.
POUR VOTRE SÉCURITÉ : A n de réduire le risque d'incendie ou d'explosion, n'entreposez pas ou n'utilisez pas
d'essence ou d'autres vapeurs ou de liquides in ammables à proximité de cet appareil.
ALIMENTATION ÉLECTRIQUE
Le mauvais branchement d'un conducteur mis à la masse d'équipement peut résulter dans un risque de choc électrique.
Véri ez avec un électricien ou un technicien quali é si vous n'êtes pas certain que les prises de vos appareils sont bien
mises à la masse.
Cet appareil doit être mis à la masse. En cas de mauvais fonctionnement ou de panne, la mise à la masse réduira le
risque de choc électrique en offrant un circuit avec le moins de résistance au courant électrique. Cet appareil est équipé
d'un cordon électrique avec un conducteur et une che à trois broches mis à la masse. La che doit être branchée dans
une prise bien installée et mise à la masse conformément aux codes et ordonnances locaux.
• Ne modi ez pas la che livrée avec cet appareil. Si elle ne s'adapte pas à la prise, faites installer une prise adéquate par
un technicien quali é.
• Si l'alimentation électrique de votre maison ne satisfait pas aux spéci cations susmentionnées ou si vous n'êtes
pas certain que votre maison a une mise à la terre ef cace, demandez à un technicien quali é ou à une compagnie
d'électricité de le véri er et de recti er tous les problèmes.
GARDEZ CES INSTRUCTIONS
MISE À LA TERRE CONSIGNES
Consignes de sécurité importantes
LISEZ TOUTE L’INFORMATION DE SÉCURITÉ AVANT UTILISATION
16
MESURES DE SÉCURITÉ
Lors de l’utilisation de ce déshumidi cateur, suivez toujours les mesures de sécurité de base, y compris les suivantes :
• N’utilisez cet appareil qu’aux ns pour lesquelles il est conçu, tel que décrit dans ce guide d’utilisation.
• Ne pas retirer le morceau de styromousse dans le récipient, puisque celui-ci agit comme indicateur du niveau d’eau.
• Ce déshumidi cateur doit être installé et mis à la terre correctement, tel que décrit dans ce guide, avant d’être utilisé.
• Ne faites jamais fonctionner ce déshumidi cateur à un endroit où de l’eau stagnante est susceptible de s’accumuler.
Dans une telle situation, pour votre sécurité, débranchez l’alimentation avant de marcher dans l’eau.
• Ne débranchez jamais votre déshumidi cateur en tirant sur le cordon d’alimentation. Tenez toujours la che fermement
et tirez bien droit pour la retirer de la prise.
• Remplacez immédiatement tous les cordons d’alimentation ef lochés ou qui présentent d’autres dommages. Un
cordon d’alimentation endommagé doit être remplacé par un nouveau cordon obtenu auprès du fabricant; il ne doit
pas être réparé. N’utilisez pas un cordon qui présente des ssures ou des dommages causés par l’abrasion, soit sur le
cordon lui-même, soit à l’extrémité de la che ou du raccord.
• Si la prise ne correspond pas à la che, la prise doit être changée par un électricien quali é.
• Éteignez le déshumidi cateur et débranchez-le avant de le nettoyer.
• Pour votre sécurité, n’entreposez et n’utilisez pas de matières combustibles, d’essence ou d’autres liquides ou vapeurs
in ammables à proximité de cet appareil ou de tout autre appareil.
• Tous les déshumidi cateurs contiennent des uides frigorigènes qui, en vertu des lois fédérales, doivent être enlevés
avant que le produit soit mis au rebut. Si vous vous débarrassez d’un produit contenant des uides frigorigènes,
demandez conseil à l’entreprise qui s’occupe de la mise au rebut pour connaître la marche à suivre. Véri ez le respect
des réglementations locales concernant la mise au rebut approuvée et sécurisée de cet appareil.
• N’utilisez pas cet appareil à l’extérieur.
• Le déshumidi cateur est uniquement conçu pour des utilisations résidentielles à l’intérieur. Ce déshumidi cateur ne doit
pas servir à des utilisations commerciales ou industrielles.
GARDEZ CES INSTRUCTIONS
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Danby DDR060BDCWDB Le manuel du propriétaire

Catégorie
Déshumidificateurs
Taper
Le manuel du propriétaire
Ce manuel convient également à