NOUJ9 - pallet ordering HF3670/60 Manuel utilisateur

Philips SleepMapper app

HF367X series

3

2

1

14

13

1

12

6

5 39

10

11

4

87

English 6

Español 29

Français (Canada) 53

English

IMPORTANT SAFETY INSTRUCTIONS

Read and follow all instructions in this user manual and heed all warnings.

WARNING

To reduce the risk of burns, fire, electric shock, or injury to persons:

-

This appliance is for indoor use only.

-

If the adapter, cord or appliance has been damaged in any way, liquid has spilled or objects

have fallen into and/or onto the appliance, the appliance has been exposed to rain or

moisture, does not operate normally or has been dropped or damaged, it should not be

operated and needs servicing by qualified service personnel (see 'Service and assistance').

-

Water and electricity are a dangerous combination. Do not use this appliance in wet

surroundings (e.g. in the bathroom or near a shower or swimming pool).

-

Make sure the adapter does not get wet.

-

Do not let water run into the appliance or spill water onto the appliance.

-

Do not immerse the appliance in water or rinse under the tap.

-

The adapter contains a transformer, which converts an unsafe 100-240V AC to a safe 24V DC

low voltage. Do not cut off the adapter to replace it with another plug, as this causes a

hazardous situation.

-

Only use the original adapter. Do not use the adapter or any of the other accessories if they

are damaged. Call 1-866-832-4361 for assistance.

-

Do not use the adapter in or near a power outlet that contains an electric air freshener to

prevent damage to the adapter.

-

Protect the power cord from being walked on or pinched, particularly at plugs, outlet and

point where they exit from lamp.

-

The appliance has no on/off switch. To disconnect the appliance from the power source,

remove the plug from the wall outlet.

-

This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for

their safety.

-

Do not install near any heat sources such as radiators, stoves, or other apparatus that

produce heat.

-

Do not impair the cooling of the appliance by covering the appliance with items such as

blankets, curtains, clothes, papers, etc.

CAUTION

-

Do not drop the appliance on the floor, hit it hard or expose it to other heavy shocks.

-

Place the appliance on a stable, level and non-slippery surface.

-

This appliance is only intended for household use, including similar use in hotels. Do not use

attachments not recommended by Philips North America LLC.

-

Check if the voltage indicated on the appliance corresponds to the local voltage before you

connect the appliance.

6

English

-

Unplug this appliance during lightning storms or when unused for long periods of time.

GENERAL

-

Do not use this appliance as a means to reduce your hours of sleep. The purpose of this

appliance is to help you wake up more easily. It does not diminish your need for sleep.

-

Consult your doctor before you start using the appliance if you have suffered from or are

suffering from depression.

-

If you feel uncomfortable at any point while using RelaxBreathe in the breathing exercise,

just go back to breathing normally.

-

If you often wake up too early or with a headache reduce the set light intensity level and/or

the set Sunrise simulation time.

-

If you often wake up by the alarm sound, increase the set light intensity level or the set

Sunrise simulation time.

-

If you share a bedroom with someone else, this person may unintentionally wake up from

the light of the appliance, even though this person is further removed from the appliance.

This is the result of differences in light sensitivity between people.

-

The power consumption of the appliance is lowest if no device is connected to the USB port

and the lamp, radio, display and Wi-Fi are turned off.

SAVE THESE INSTRUCTIONS

Contents

IMPORTANT SAFETY INSTRUCTIONS________________________________________________________ 6

Introduction ___________________________________________________________________________________ 8

General description___________________________________________________________________________ 8

Intended use__________________________________________________________________________________ 9

The effects of the connected Sleep & Wake-Up Light_______________________________________ 9

Display icons__________________________________________________________________________________ 9

Connecting your appliance to Wi-Fi__________________________________________________________ 10

Navigating the menu__________________________________________________________________________ 12

Setting wake-up profiles______________________________________________________________________ 12

PowerBackUp+________________________________________________________________________________ 13

Snoozing_______________________________________________________________________________________ 13

Dismissing the alarm__________________________________________________________________________ 14

Using the appliance as a reading light________________________________________________________ 14

Midnight light__________________________________________________________________________________ 14

Settings________________________________________________________________________________________ 15

Listening to radio or your own music_________________________________________________________ 16

Wind-down programs_________________________________________________________________________ 17

Sunset simulation_____________________________________________________________________________ 18

RelaxBreathe__________________________________________________________________________________ 18

Bedtime function______________________________________________________________________________ 19

7

English

Charging your mobile phone__________________________________________________________________ 19

Cleaning and storage__________________________________________________________________________ 19

Disposal________________________________________________________________________________________ 20

Service and assistance________________________________________________________________________ 20

90-Day Money-Back Guarantee _____________________________________________________________ 20

Full Two-Year Warranty_______________________________________________________________________ 20

Troubleshooting_______________________________________________________________________________ 21

Safety and compliance________________________________________________________________________ 25

Electromagnetic fields (EMF)_________________________________________________________________ 25

FCC Information_______________________________________________________________________________ 26

Specifications__________________________________________________________________________________ 26

Introduction

The Philips connected Sleep & Wake-Up Light helps you wake up

more pleasantly. If the Sunrise simulation is active (default is 30

minutes), the light intensity of the lamp gradually increases to the set

level and the light color changes from deep morning red to bright

daylight. The light gently prepares your body for waking up at the set

time. To make waking up an even more pleasant experience, you can

use natural wake-up sounds or the FM radio to wake up to.

The light-guided breathing function, personalized sun settings,

bedroom environment tracking and several other features make this

Connected Sleep & Wake-Up Light the perfect companion for your

bedroom.

Tip: Using the Philips SleepMapper app will enable extra features. Any

information about these features is explained in the app.

General description

1 Deco ring

2 Lamp housing

3 Display

4 Sound pressure sensor

5 USB charging port

6 Reset button

7 Radio antenna

8 AmbiTrack sensor: Humidity and temperature sensor

9 Auxiliary (AUX) inlet

10 Adapter DC-inlet

11 Speaker

12 Snooze/Midnight Light

13 Adapter

14 Small plug

8

English

Intended use

The Philips connected Sleep & Wake-Up Light is intended to give you

a more natural and refreshed wake-up and a relaxed feeling before

falling asleep.

This is not a general illumination product.

The effects of the connected Sleep & Wake-Up

Light

The Philips connected Sleep & Wake-Up Light gently prepares your

body for waking up during the last 5 to 40 minutes of your sleep,

depending on the Sunrise simulation time you set. In the early

morning hours, our eyes are more sensitive to light than when we are

awake. During this period, the relatively low light levels of a simulated

natural sunrise prepare our body for waking up and getting alert.

People who use the connected Sleep & Wake-Up Light report waking

up more easily, have a better overall mood in the morning and feel

more energetic. Because the sensitivity to light differs per person, you

can set the light intensity of your appliance to a level that matches

your light sensitivity for an optimal start of the day. For more

information about the connected Sleep & Wake-Up Light, see

www.philips.com.

Display icons

Wake-up profile / Alarm Light intensity and light on/off

Settings Radio or your own music

Wind-down program Wi-Fi

Wi-Fi disabled Audio feedback

Display brightness Enable automatic display on

Disable automatic display off Radio

AUX inlet Sunset simulation

9

English

RelaxBreathe RelaxBreathe rythms

Light or sound guidance Start bedtime

Snooze/Midnight Light

Connecting your appliance to Wi-Fi

The firmware of your appliance might be automatically updated when

you connect to Wi-Fi. If your appliance is updated, the information in

this user manual may not be up to date. Find the latest user manual

online.

Easy Wi-Fi setup

Download the Philips SleepMapper app from Google play or the App

store on your smartphone. See the information in Google play or the

App store to check if your smartphone is compatible with the app. You

can easily set up the Wi-Fi connection to your connected Sleep &

Wake-Up Light.

The setup to install your Sleep & Wake-Up Light and connect to your

home Wi-Fi network only needs to be done once. This setup will take

approximately 5-10 minutes.

Setup wizard of the connected Sleep & Wake-Up Light

1 When you use your connected Sleep & Wake-Up Light for the first

time, a setup wizard starts on the appliance.

2 After selecting your language on the display of the appliance,

continue in the app. Make sure that you have the app open on your

smartphone.

3 Follow the instructions in the app to connect your appliance to the

Wi-Fi network. If you have trouble connecting your appliance,

check the items mentioned in the troubleshooting section (see

'Troubleshooting').

10

English

-

If you previously chose to set up your appliance without the app,

but now want to connect your appliance to the app you press and

hold the Wi-Fi icon for 8 seconds. The access point mode icon will

be shown on the display

. Open the app on your smartphone to

connect.

-

If you have changed your Wi-Fi home network or changed your

password, you also need to press and hold the Wi-Fi icon for 8

seconds

. You will see the access point mode icon on the display

.Open the app on your smartphone to connect.

Note: Make sure your smartphone is connected to the Wi-Fi network

you use in your bedroom.

Note: The app on your smartphone and your connected Sleep &

Wake-Up Light can ONLY communicate with each other when both

appliances are connected to the same home Wi-Fi network.

Note: You cannot remotely control the device through the app (e.g. set

an alarm) if you are not connected to your home Wi-Fi network or if

your smartphone is connected to 4G.

This Wi-Fi connection issue icon might appear on the display if a

connection cannot be established. Check the troubleshooting section

to solve the problem (see 'Connectivity troubleshooting').

AmbiTrack sensors

The connected Sleep & Wake-Up Light collects input from its

surroundings through the AmbiTrack sensors. AmbiTrack sensors

measure light, humidity, temperature and sound pressure. These

factors can influence your sleep. Only in the app you can see

information on the recommended values for ideal sleep conditions.

The measurements of the sensors can be influenced by the

surroundings of the connected Sleep & Wake-Up Light.

For example, if you place the appliance next to a window or near a

heating source such as a radiator, the temperature and humidity

sensors might not represent the temperature / humidity of the entire

room.

Setting up your appliance without the app

You can set up the Sleep & Wake-Up Light without the app. Before

you can use the appliance, a setup wizard on the appliance needs to

be completed first. You can connect the appliance to the app later

(see 'Easy Wi-Fi setup').

We strongly recommend you to set up your appliance with the

SleepMapper app in order to enjoy all functionalities the app offers.

11

English

1 Start the setup wizard by tapping on the start icon on the display of

the appliance.

2 You will be guided through the setup wizard on the appliance,

where you set the desired settings, a wake-up profile and a

winddown program.

Note: The wake-up profile and the wind-down program can be set

later. Skip these settings by tapping the arrow repeatedly. However,

we advise you to set your wake-up profile and your wind-down

program during this setup. This can help you explore the different

functions of the appliance.

Navigating the menu

If you have set up your appliance with the help of the SleepMapper

app (see 'Easy Wi-Fi setup') or through the setup wizard (see 'Setting

up your appliance without the app') on the appliance, you will see the

menu as described in the following sections.

On the display of the appliance you can select and set the wake-up

profile, reading light, settings, sound (source) or the unwind program.

Note: All your personalized settings and profiles will be permanently

stored in the memory, they will not be erased by removing the

adapter from the electrical outlet. You can change all settings at any

time, the last setting will be stored.

Note: If the display is blank, move your hand towards the lower part of

the Sleep & Wake-up Light to show the display menu. You will see the

menu icons.

Setting wake-up profiles

In your wake-up profile on the appliance you can set the alarm time,

the maximum light intensity and type of wake-up sound you prefer.

With the SleepMapper app, you can set more wake-up profiles.

Note: The main display of the appliance shows if the alarm has been

set.

To disable the alarm, press on the disable alarm icon .

Note: Press and hold the alarm icon to deactivate all set alarms at

once.

12

English

Set wake-up profile

You can set 2 different wake-up profiles on the appliance. For each

profile, you can set the time, light intensity, wake-up curve duration,

type of sound and volume. With the SleepMapper app you can set 16

alarms in total, giving you more options to choose the time and day

on which the alarm should go off.

Duration of the wake-up profile

The default duration of the wake-up curve (brightness increase to the

set maximum light intensity) is 30 minutes. The duration can be

changed to your preference by pressing the icon on the appliance.

With the Sleepmapper app you can set different wake-up profiles.

Light intensity of the wake-up profile

The lamp of the appliance simulates a sunrise. Like a sunrise, the

brightness of the lamp increases gradually. During this wake-up curve,

the color of the light changes from soft red to warm orange to bright

yellow. You can choose one of the 25 light intensity levels.

Type of sound

You can choose between three options. Select one of the natural

sounds

, no sound or the FM radio .

PowerBackUp+

In the event of a power failure, all functions of the appliance, including

the display, do not work. However, the internal clock and a back-up

alarm remain active for at least 8 more hours.

If during the power failure the set alarm time is due, a back-up alarm

goes off generating a beeping sound for approximately 1 minute.

Snoozing

When the wake-up curve has ended (when the set maximum light

intensity has been reached) and the alarm sound is playing, you can

tap the top of the appliance to snooze.

The lamp stays on, but the sound is muted. After 9 minutes, the alarm

sound starts playing again.

Note: The light and sound automatically turn off 60 minutes after the

alarm has gone off or 60 minutes after the last snooze action.

13

English

Dismissing the alarm

When the alarm goes off, you can dismiss it by pressing this icon on

the appliance. If you dismiss it, this alarm profile is deactivated for that

day.

Using the appliance as a reading light

You can use the connected Sleep & Wake-Up Light as a reading light.

Press the reading light icon on the display to switch on the reading

light.

Note: You can increase and decrease the brightness intensity. You can

select a brightness between 1 (low) and 25 (high). The default

brightness setting is 18.

To switch off the light, press the cross icon in the menu.

Tip: When the light is on, you can also turn off the light with a single

tap on the top of the appliance. All active programs will stop. Set

alarms are still active.

Midnight light

If you wake up during the night, you can tap the top of the appliance

to activate a dim light. This dim, subtle orange light provides you with

just enough light to find your way in the dark. Switch off the Midnight

light by tapping the top of the appliance again.

Note: The Midnight light cannot be activated directly when the main

light is already on. In that case, first tap the top of the appliance to

deactivate the main light. Then tap again to activate the Midnight

light.

14

English

Settings

In this menu, you can adjust the clock time, the audio feedback, the

display brightness of the appliance and enable/disable Wi-Fi.

Note: Press and hold the settings icon for 8 seconds to open a new

menu, in which you can select DEMO mode (accelerated wake-up

curve) or VERSION (firmware version of the appliance).

If you have updated the appliance through connection to the app, the

information in this document may not be up to date. Find the latest

user manual on www.philips.com/support

Philips reserves the right to update the firmware of the appliance.

Time

You can change the time and switch between a 12-hour clock

(AM/PM) and a 24-hour clock by pressing on the toggle icon (12/24).

Note: This option is not available when the appliance is connected to

Wi-Fi.

Wi-Fi

Turn Wi-Fi on or off by pressing on the Wi-Fi icon. When Wi-Fi is

disabled

, any update made in the app will not be implemented

until the Wi-Fi connection is restored.

Note: Press and hold the Wi-Fi icon for approximately 8 seconds to

return to access point mode. Open access point mode when you want

to connect your appliance to a different Wi-Fi network or if you have

changed your Wi-Fi password.

If you accidentally activated access point mode, press the Wi-Fi icon

in the Wi-Fi menu twice to activate Wi-Fi again. Your connected Sleep

& Wake-Up Light remembers the network you were connected to.

Audio feedback

If you do not want to hear clicks when you press an icon, press the

audio feedback icon to turn off the audio feedback. You hear one click

as a confirmation. To reactivate the audio feedback, press this icon

again.

15

English

Display

Display brightness

You can adjust the display brightness from level 1 to level 6. We advise

you to set the display contrast in a dark bedroom. Choose a contrast

level that is optimal for you to see the display at night. The display

contrast will increase to a higher level when the Connected Sleep &

Wake-up Light measures a lot of light in the bedroom. This happens

automatically, so you will always be able to see the display, even

when the surroundings are lighter.

Display on/off

If you do not want the appliance to produce any light (including time

indication), you can turn off the display completely by pressing the

automatic display off icon.

Normally, if you do not touch the display for some time in any menu,

the display reverts to time and status indication only. When the

display is off, no time indication is shown.

Disable automatic display off by pressing the crossed-out icon.

Tip: If you want to check the time or select a function while the display

is off, just place your hand near the display to turn it on for a few

seconds.

Listening to radio or your own music

Tip: When the radio or music is on, you can turn off the sound with a

single tap on top of the connected Sleep & Wake-Up Light. All active

programs will stop. Set alarms are still active.

Radio

You can listen to the FM radio with the connected Sleep & Wake-Up

Light. If you have set the radio function in the setup wizard, it shows

the selected radio station. You can manually change the radio station

by changing the FM frequency.

Tip: Make sure that you unwind the antenna fully and move it around

until the radio has the best reception.

16

English

You can preset 5 radio stations. Within each radio preset, you can

manually set the FM frequency. Press the radio preset icon, then

longpress the double arrow icon to automatically search for the next

radio station. To save the radio frequency, press the check mark icon.

After setting a radio station, you can easily add another preset radio

station by selecting the toggle icon. With this process, you can preset

5 radio stations.

Set the preferred volume. To save the volume setting, press the check

mark icon.

Music via Auxiliary (AUX) inlet

You can use the connected Sleep & Wake-Up Light as a speaker for

music by connecting a music playing device (for instance your mobile

phone) to the AUX inlet.

Note: You cannot wake up to music from a device connected to the

AUX inlet.

If the sound is not loud enough when you have set the connected

Sleep & Wake-Up Light to maximum volume, increase the volume of

your music playing device.

If the sound is too loud or distorted when you have set the connected

Sleep & Wake-Up Light to a low volume setting, decrease the volume

of your music playing device.

Note: Press and hold the music note icon to activate/deactivate the

sound via the menu. You can also deactivate the sound by tapping

the top of the appliance.

Note: You need an AUX cable to connect the connected Sleep &

Wake-Up Light to a music playing device.

Wind-down programs

The appliance features two wind-down programs to help you relax

before you fall asleep.

You can deactivate the active wind-down program by tapping the top

of the appliance.

17

English

Sunset simulation

During the sunset simulation, the brightness of the light decreases

gradually with colors changing from bright yellow to warm orange to

soft red. You can set the duration of the sunset simulation and the

initial light intensity of the sunset simulation.

You can also select a sound that fades away during the sunset

simulation. You can set the sound source and the initial volume. You

can either choose a natural sound, radio or no sound. You can also

play your own music by connecting a music playing device to the AUX

socket.

RelaxBreathe

RelaxBreathe uses the belly breathing technique as a basis for the

breathing program. You can choose one of the breathing programs,

guided by light or sound. The combination of the belly breathing

exercise and the guidance of the connected Sleep & Wake-Up Light

helps you slow down and feel relaxed.

You can select one of seven relaxation programs with preset

breathing rhythms. Each relaxation program has a different breathing

rhythm. The program '4 breaths' is preset to 4 breaths per minute.

Program '5 breaths' is preset to 5 breaths per minute. Each next

program has one additional breath per minute. The last program (10

breaths) is preset to 10 breaths per minute.

You can select light or sound to guide you during the selected

relaxation program. Follow the light or sound when you inhale and

exhale.

-

For guidance with light, inhale when the light intensity increases. In

between the two subtle light flashes, hold your breath. Exhale

slowly when the light intensity decreases.

-

For guidance with sound, inhale when the intensity of the sound of

the waves increases. When the intensity of the sound pauses, hold

your breath. Slowly exhale when the intensity of the sound of the

waves decreases.

Follow your preferred rhythm with the help of light or sound for a

more relaxed feeling. You can even do this with your eyes closed.

Note: You can find an instruction video of RelaxBreathe in the app

and on the Philips website.

Belly breathing for relaxation

Belly breathing is the most recognized breathing exercise technique

to help people relax. When you breathe from your belly, your

diaphragm pulls down automatically. This pulls down your lungs and

allows you to inhale fully and deeply.

18

English

Caution: If you feel uncomfortable at any point during this breathing

exercise, just go back to breathing normally.

How to do belly breathing

1 Lie down comfortably on your back.

2 Inhale through your nose, exhale through your nose or mouth.

3 Place one hand on your stomach and your other hand on your

chest.

You should see your hand on your stomach move up with each

inhale and move down with each exhale. The hand on your chest

should only move slightly.

4 Your breath should only come from your belly. Try to make your

exhale longer than your inhale as this will quickly make you feel

more relaxed.

Note: The RelaxBreathe function of the appliance can guide you

during belly breathing.

Bedtime function

You can track your time in bed by longpressing the top of the

appliance for approximately 2 seconds before going to sleep to

activate the bedtime function. Or activate bedtime in the unwind

menu. You can also start the bedtime function by pressing 'start

tracking' in the SleepMapper app.

A moon icon will appear on the display of the appliance to let you

know bedtime tracking has started. You can find more information

about the bedtime function in the app.

Charging your mobile phone

You can use the USB port (see 'General description') to charge your

smartphone (max 1000 mA).

Cleaning and storage

-

Clean the appliance with a soft, dry cloth.

-

Do not use abrasive cleaning agents, pads or cleaning solvents like

alcohol, acetone, etc., as this may damage the surface of the

appliance.

-

If you are not going to use the appliance for an extended period of

time, remove the adapter from the wall outlet and store the

appliance in a safe, dry location where it will not be crushed,

banged, or subject to damage.

19

English

-

Do not wrap the cord around the appliance when storing it.

Disposal

Your product is designed and manufactured with high quality

materials and components, which can be recycled and reused. For

recycling information, please contact your local waste management

facilities or visit www.recycle.philips.com.

Service and assistance

This appliance has no other user-serviceable parts. For assistance visit

our website: www.philips.com/support or call toll free:

1-866-832-4361.

Online information is available 24 hours a day, 7 days a week.

90-Day Money-Back Guarantee

If you are not fully satisfied with your product send the product back

and we’ll refund you the full purchase price.

The product must be shipped prepaid by insured mail, insurance

prepaid, have the original sales receipt, indicating purchase price and

date of purchase, and the money-back guarantee return authorization

form enclosed.

We cannot be responsible for lost mail.

The product must be postmarked no later than 90 days after the date

of purchase. Philips reserves the right to verify the purchase price of

the product and limit refunds not to exceed suggested retail price.

To obtain money-back guarantee return authorization form, call

1-866-832-4361 for assistance.

Delivery of refund check will occur 6–8 weeks after receipt of returned

product.

Full Two-Year Warranty

Philips North America LLC (USA) and Philips Electronics Ltd (Canada)

warrant this new product against defects in materials or workmanship

for a period of two years from the date of purchase, and agree to

repair or replace any defective product without charge.

IMPORTANT: This warranty does not cover damage resulting from

accident, misuse or abuse, lack of reasonable care, or the affixing of

any attachment not provided with the product or loss of parts or

subjecting the product to any but the specified voltage or batteries.*

NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL

OR CONSEQUENTIAL DAMAGES.

20

English

In order to obtain warranty service, go to www.philips.com/support

for assistance. It is suggested that for your protection you return

shipments of product by insured mail, insurance prepaid. Damage

occurring during shipment is not covered by this warranty.

NOTE: No other warranty, written or oral, is authorized by Philips

North America LLC.

This warranty gives you specific legal rights, and you may also have

other rights which vary from state to state, province to province or

country to country. Some states do not allow the exclusion or

limitation of incidental or consequential damages, so the above

exclusion and limitations may not apply to you.

* Read enclosed instructions carefully.

In US manufactured for: Philips Personal Health, a division of Philips

North America LLC, P.O. Box 10313, Stamford, CT 06904.

In Canada imported by: Philips Electronics LTD, 281 Hillmount Road,

Markham, Ontario L6C 2S3.

PHILIPS and Philips shield are registered trademarks of Koninklijke

Philips N.V.

Troubleshooting

This chapter summarizes the most common problems you could

encounter with the appliance.

If you are unable to solve the problem with the information below,

visit www.philips.com/support or call 1-866-832-4361 for assistance.

Connectivity troubleshooting

Problem Solution

I cannot download

the app on my

smartphone.

The app is available for Android and IOS smartphones. The app is not

available for Windows phones.

21

English

Problem Solution

I cannot connect my

Wake-Up Light to my

home-Wi-Fi network,

what should I do?

If you cannot connect your Wake-Up Light to your home Wi-Fi

network and still see the flashing icon for access point mode

, it

could be one of following issues:

1. Wrong password. Make sure that you entered the correct Wi-Fi

network password and try again.

2. Is your router suitable for connection with your Wake-up Light?

Your router must have a 2.4 GHz band to communicate with the

appliance. For the first time setup make sure your smartphone and

the appliance are both connected to the same 2,4 GHz Wi-Fi network,

otherwise you will not be able to connect the appliance and your

smartphone. The appliance cannot connect to a 5 Ghz network.

Temporarily switch off the 5 Ghz network to connect the appliance to

2.4 Ghz network. Afterwards you can switch on the 5 Ghz network

again.

3. Check the signal strength of the Wi-Fi. If the signal is weak, the

appliance cannot connect properly. Move the appliance closer to the

router to make sure that a good Wi-Fi signal is available.

4. If the previous steps are not the issue, call 1-866-832-4361 for

assistance.

Connecting my

connected Sleep &

Wake-Up Light to a

Wi-Fi guest network

does not work.

Within a Wi-Fi guest network, different devices (e.g. your smartphone

and connected Sleep & Wake-Up Light) are often not allowed to

communicate with each other. You will see the flashing icon for

access point mode

on the display of the appliance.

If you want to change this setting within your own Wi-Fi guest

network, enable universal Plug and Play (uPnP) on your router.

22

English

La page charge ...

NOUJ9 - pallet ordering HF3670/60 Manuel utilisateur

Ce manuel convient également à

NOUJ9 - pallet ordering HF3670/60 Manuel utilisateur

dans d''autres langues

Autres documents