Sanyo CE42LH2R Manuel utilisateur

Marque: Sanyo

Modèle: CE42LH2R

Catégorie: Affichages publics

Taper: Manuel utilisateur

Ce manuel convient également à

INSTRUCTION MANUAL CE42LH2R

CE42LH2DPB

CE42LH2WP

LCD Monitor

Please read this Instruction book before using your LCD monitor.

We wish you many hours of pleasure from your new LCD monitor.

TABLE OF CONTENTS ........................ 2

SAFETY PRECAUTIONS ....................... 3

Installation and Use.............................. 3

SERVICING .................................. 4

Servicing...................................... 4

Federal Communications Commission Notice ......... 4

AC Power Cord Requirement ...................... 5

End-User License ............................... 5

INSTALLATION .............................. 6

Step: 1 Mains Connection......................... 6

Step: 2 Connections ............................. 6

Remote control ................................. 7

Remote control battery installation.................. 7

Controls and Menus ............................. 8

Menu Operation................................. 8

Picture menu................................... 8

MENU OPERATION ........................... 9

Picture menu................................... 9

Sound menu ................................... 9

Time menu..................................... 9

Setup menu.................................... 9

PC Adj. menu...................................

INSTALLATION MODE ........................11

Installation Mode................................11

OPERATION ................................ 12

Selection of picture size ..........................12

PIP/POP Operation..............................13

OPERATION (IN TEXT MODE) ................. 14

Teletext Operation...............................14

SPECIFICATIONS/HELPFUL HINTS ............. 15

6SHFL¿FDWLRQ ...................................15

Helpful hints....................................15

DIMENSIONS ............................... 16

PC/DVI-D/COMPONENT SIGNAL SUPPORT

TIMING LIST .................................17

RS232C COMMAND TABLES .................. 18

TABLE OF CONTENTS

Robust monitor (CE42LH2R CE42LH2DPB)

The robust monitor can be used in a wide variety of environments for dusty and oily circumstance such as fast food, digital signage, industrial

and public display.

LALUMINUM CABINET & NON HOLES DESIGN

This monitor set uses Anodized aluminum and it has quite unique “Non-Holes” ventilation design which protects against mischief in the

public display applications and less maintenance when used in a dusty or oily environment.

Weather proof monitor (CE42LH2WP)

Weather resistant and water proof in accordance with the IP66 standard.

LANTI REFLECTION TAMPER GLASS

This monitor set has a tough anti refection tampered glass. This offers the protection for the panel surface in the public display circum

stance.

LALUMINUM CABINET & NON HOLES DESIGN

This monitor set uses Anodized aluminum and it has quite unique “Non-Holes” ventilation design which protect against mischief in the

public display applications and less maintenance from dust and oil circumstance, and having perfect protection of IP66 weather-resistant

approval.

LEXTENSIVE INPUT & OUTPUT TERMINALS (for all products)

This monitor set has various input and output terminals including component (Y,Pb,Pr) or RGBHV input and output with 5-BNC, compos

ite video input and output with BNC, and RS-232 control port (serial D-Sub 9) input and output which offer the daisy chain connection.

7KHUHDUHFRPSXWHULQSXWVD'6XE5*%WHUPLQDODQG'9,'LQSXWZLWK+'&3IRU+LJKGH¿QLWLRQVLJQDOV7KHUHDUHDOVRMDFNVIRU

H[WHUQDOVSHDNHUV

Trademarks

(DFKQDPHRIFRUSRUDWLRQVRUSURGXFWVLQWKLVERRNLVHLWKHUDUHJLVWHUHGWUDGHPDUNRUDWUDGHPDUNRILWVUHVSHFWLYHFRUSRUDWLRQ

GB GB

CAUTION: Please read and retain for your safety. This unit has been designed and manufactured to assure your personal safety, but

LPSURSHUXVHFDQUHVXOWLQSRWHQWLDOHOHFWULFVKRFNRU¿UHKD]DUGV,QRUGHUQRWWRGHIHDWWKHVDIHJXDUGVLQFRUSRUDWHGLQWKLVPRQLWRUREVHUYHWKH

following basic rules for its installation, use and servicing.

Installation and Use

Do not allow anything to rest on the power

cord. Do not locate this LCD monitor where the

FRUGZLOOEHGDPDJHGE\SHRSOHZDONLQJRQLW

Do not overload wall outlets and extension

FRUGVDVWKLVFDQUHVXOWLQ¿UHRUHOHFWULFVKRFN

$VXLWDEOHVRFNHWRXWOHWPXVWEHSURYLGHGQHDU

to the monitor and shall be easily accessible.

Do not place this LCD monitor near any heat

sources such as radiators, heaters, stoves and other heat-generating

SURGXFWVLQFOXGLQJDPSOL¿HUV

Do not place your LCD monitor on an unstable stand, shelf or table.

Serious injury to an individual, and damage to the LCD monitor may

result if it should fall. Your sales person can recommend an approved

ZDOOPRXQWLQJNLW$VSHFLDOZDOOPRXQWLQJNLWLVDYDLODEOHIRUWKLV

model.

This LCD monitor should be operated only from the type of power

source indicated on the monitor or as indicated in the Operating In-

structions. If you are not sure of the type of power supply, consult your

sales person or your local power company.

For added protection it is strongly recommended that this LCD

monitor has its mains supplied via an approved earth fault protection

device.

WARNING: To prevent injury the LCD monitor must be securely

attached to the wall in accordance with the manufacturers installation

instructions.

IMPORTANT:

This product must be earthed.

This unit is not disconnected from the mains unless the mains lead

LVXQSOXJJHG7KHLQVWDOOHUPXVWPDNHVXUHWKDWWKHZDWHUSURRILQOLQH

coupler is easily accessible.

(CE42LH2WP model only)

This monitor is tested to IP66 standard rating.

This monitor is not protected against temporary or continuous

immersion in liquid.

Do not use immediately after moving the LCD monitor from a low

temperature to a high temperature environment, as this causes con-

GHQVDWLRQZKLFKPD\UHVXOWLQ¿UHHOHFWULFVKRFNRURWKHUKD]DUGV

%HIRUHFOHDQLQJXQSOXJWKHPRQLWRUIURPWKHZDOOVRFNHW

Do notPRXQWQHDUDQRSHQÀDPHVRXUFH2SHQÀDPHVPXVWQHYHU

be used near this LCD monitor.

This LCD monitor should not be built in or enclosed in any way, heat

build up will reduce the life of the monitor.

This LCD monitor should have a minimum distance of 5cm away from

the wall and the monitor should have 10cm distance around the top

and sides.

AlwaysPRXQWXVLQJUHFRPPHQGHGDQGVXEVWDQWLDO¿[WXUHVDQG¿W-

tings.

10cm

5cm

7KHUHDU¿QQHGVHFWLRQDURXQGWKHFDELQHWIXQFWLRQVDVDKHDWVLQN

removing heat away from the monitor. The external surface of the

FDELQHW¿QQHGDUHDPXVWQRWEHFRYHUHGRUWKHDLUÀRZUHVWULFWHGLQ

anyway by enclosing the LCD monitor.

(CE42LH2WP model only)

The operating temperature range of this monitor is guaranteed 0°C

~ 40°C/32°F ~ 104°F. It is not recommended to install the screen

in direct sunlight without adequate shading, as this will cause the

WHPSHUDWXUHRIWKHSDQHOWRULVHDERYHWKHPD[LPXPVSHFL¿HG'R-

LQJVRPD\FDXVHDEODFNVKDGRZWRDSSHDURQWKHVFUHHQZKLFK

will disappear when the screen temperature returns to within the

VSHFL¿FDWLRQ7KLV³RIFRXUVH´GRHVQRWSURGXFHDQ\KDUPIXOHIIHFW

on the lifetime of the monitor.

Do not apply liquid cleaners or aerosol cleaners directly onto the LCD

monitor. Use a damp cloth for cleaning.

ADDITIONAL FOR NORTH AMERICA AND CANADA:

This monitor must NOT be permanently mounted to the building

structure. It must be mounted in such a way that it can be removed

using basic tools.

The power supply cord must NOT be attached to the building surface.

The power supply cord must NOT be routed through walls, ceiling,

ÀRRUVRURWKHUVLPLODURSHQLQJVLQWKHEXLOGLQJVWUXFWXUH

The power supply cord MUST be positioned so as to prevent physical

damage.

Important: (UK only)

THIS PRODUCT MUST BE EARTHED.

7KLVHTXLSPHQWLV¿WWHGZLWKDQDSSURYHGPDLQVOHDGDQGDQ

approved non rewireable UK mains plug. To change a fuse in this

type of plug proceed as follows:

1. Remove the fuse cover and fuse.

2. Fit a new fuse which should be a BS1362 13 Amp A.S.T.A. or

BSI approved type.

3.(QVXUHWKDWWKHIXVHFRYHULVFRUUHFWO\UH¿WWHG

If the fuse cover is lost or damaged the plug must NOT be used

but replaced with a serviceable plug.

,IWKH¿WWHGSOXJLVQRWVXLWDEOHIRU\RXUVRFNHWRXWOHWVLWVKRXOGEH

FXWRIIDQGDQDSSURSULDWHSOXJ¿WWHGLQLWVSODFH,IWKHPDLQVSOXJ

contains a fuse, this should have a rating of 13 Amp, ensure the

IXVHFRYHULVFRUUHFWO\¿WWHG,IDSOXJZLWKRXWDIXVHLVXVHGWKH

fuse at the distribution board should not be greater than 13 Amp.

Note: The severed plug must be destroyed to avoid a possible

VKRFNKD]DUGVKRXOGLWEHLQVHUWHGLQWRD$PSVRFNHWHOVH-

where.

The wires in this mains lead are coloured in accordance with the

following code:

Blue Neutral

Brown Live

Green and Yellow Earth

1. The Blue wire must be connected to the terminal which is

PDUNHGZLWKWKHOHWWHU³1´RUFRORXUHG%/$&.

2. The Brown wire must be connected to the terminal with the

letter “L” or coloured RED.

3. The Green and Yellow wire must be connected to the terminal

ZKLFKLVPDUNHGZLWKWKHOHWWHU³(´RUFRORXUHG*5((1RU

GREEN and YELLOW.

%HIRUHUHSODFLQJWKHSOXJFRYHUPDNHFHUWDLQWKDWWKHFRUGJULSLV

clamped over the sheath of the lead - not simply over the wires.

Do not attempt to bypass the safety purpose of the grounding

type plug.

THIS UNIT IS NOT DISCONNECTED FROM THE MAINS UN-

LESS THE MAINS LEAD IS UNPLUGGED.

THE INSTALLER MUST MAKE SURE THE MAINS LEAD IS

EASILY ACCESSIBLE.

SAFETY PRECAUTIONS

GB GB

Servicing

Your monitor is fully transistorised and does not contain any user serviceable components.

You must not remove the rear cover of the monitor by yourself. The apparatus is working with high voltages and could damage

objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively

use such spare parts that are complying with the same safety standards as applicable to the original parts. The use of original

VSDUHSDUWVFDQSUHYHQW¿UHVKRFNDQGRWKHUKD]DUGV

8QSOXJWKH/&'PRQLWRUIURPWKHZDOORXWOHWDQGUHIHUVHUYLFLQJWRTXDOL¿HGVHUYLFHSHUVRQQHOXQGHUWKHIROORZLQJ

conditions:

NIf the power cord or plug is damaged.

NIf liquid has been spilt in to the LCD monitor.

NIf the LCD monitor has been dropped or the cabinet has been damaged.

NIf the LCD monitor exhibits a distinct change in performance.

NIf the LCD monitor does not operate normally by following the operating instructions.

NIf the LCD monitor has been exposed to rain or water. (CE42LH2R/CE42LH2DPB model only)

Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage.

7KLVZLOORIWHQUHTXLUHH[WHQVLYHZRUNE\DTXDOL¿HGWHFKQLFLDQWRUHVWRUHWKHPRQLWRUWRQRUPDORSHUDWLRQ

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits

are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,

PD\FDXVHKDUPIXOLQWHUIHUHQFHWRUDGLRFRPPXQLFDWLRQV2SHUDWLRQRIWKLVHTXLSPHQWLQDUHVLGHQWLDODUHDLVOLNHO\WRFDXVHKDUPIXOLQWHUIHU-

ence in which case the user will be required to correct the interference at his own expense.

'RQRWPDNHDQ\FKDQJHVRUPRGL¿FDWLRQVWRWKHHTXLSPHQWXQOHVVRWKHUZLVHVSHFL¿HGLQWKHLQVWUXFWLRQV,IVXFKFKDQJHVRUPRGL¿FDWLRQV

should be made, you could be required to stop operation of the equipment.

Canadian Radio Interference Regulations

This Class A digital apparatus meets all requirements of the Canadian ICES-003.

WARNING

7KLVLVD&ODVV$SURGXFW,QDGRPHVWLFHQYLURQPHQWWKLVSURGXFWPD\FDXVHUDGLRLQWHUIHUHQFHLQZKLFKFDVHWKHXVHUPD\EHUHTXLUHGWRWDNH

adequate measures.

Important recycling information.

Your SANYO product is designed and manufactured with high quality materials and components

which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should be dis-

posed of separately.

In the European Union there are separate collection systems for used electrical and electronic

products.

Please help us to conserve the environment we live in!

Note:7KLVV\PEROPDUNDQGUHF\FOHV\VWHPDUHDSSOLHGRQO\WR(8FRXQWULHVDUHQRWDSSOLHGWR

other countries of the world.

SERVICING

GB GB

AC Power Cord Requirement

The AC Power Cord supplied with this LCD monitor meets the requirement for use in the country in which you

purchase it.

AC Power Cord for the United States and Canada:

$&3RZHU&RUGXVHGLQWKH8QLWHG6WDWHVDQG&DQDGDLVOLVWHGE\WKH8QGHUZULWHUV/DERUDWRULHV8/DQGFHUWL¿HG

by the Canadian Standard Association (CSA).

$&3RZHU&RUGKDVDJURXQGLQJW\SH$&OLQHSOXJ7KLVLVDVDIHW\IHDWXUHWRPDNHVXUHWKDWWKHSOXJZLOO¿WLQWRWKHSRZHURXWOHW

Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician.

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE

End-User License

The product (meaning the equipment or appliance to which this documentation relates) incorporates Software (the software applications, utili-

ties and modules embedded within the Product) which is owned by Sanyo or its licensors. Before using the product, please read the End-User

License Conditions detailed below. If you do not agree to the terms and conditions of the End-User License, Please do not proceed to use the

3URGXFWUHSDFNWKH3URGXFWXQXVHGDQGUHWXUQLWWR\RXUVXSSOLHUWRJHWKHUZLWKSURRIRISXUFKDVHIRUDIXOOUHIXQG%\XVLQJWKHSURGXFW\RX

agree to be bound by the terms and conditions of the End-User License.

/LFHQVH*UDQW&RQGLWLRQVDQGUHVWULFWLRQV

1. Sanyo grants you a non-exclusive, world-wide (subject to export controls), non-transferable (except as permitted by 2 below), royalty-free

license to use the Software upon and with the Product.

2. You may not transfer any of your license rights in the Software without the prior written consent of SANYO and if consent is provided then

the Software shall only be transferred in conjunction with the transfer of the Product AND provided that the transferee has read and agreed

to accept the terms and conditions of this license.

3.<RXPXVWHQVXUHWKDWWKHFRS\ULJKWWUDGHPDUNDQGRWKHUSURWHFWLYHQRWLFHVFRQWDLQHGLQWKH6RIWZDUHDUHPDLQWDLQHGDQGQRWDOWHUHGRU

removed.

4. The Software provided hereunder is copyrighted and licensed (not sold). SANYO especially does not transfer title or and ownership rights

in the Software to you. The Software provided hereunder may contain or be derived from portions of materials provided to SANYO under

license by a third party supplier.

5. Except as expressly permitted by statute you may not;

L use the Software in conjunction with any other computer hardware other than the product;

L copy all or part of the Software;

L incorporate all (or any of) the Software into other programs developed by (or on behalf of) you and/or used by you;

L reverse-engineer, decompile or disassemble the Software;

L PDNHWKH6RIWZDUHRUDQ\SDUWRILWDYDLODEOHRUSHUPLWLWVUHGLVWULEXWLRQIRUXVHZLWKDQ\FRPSXWHUKDUGZDUHRWKHUWKDQWKH3URGXFWRU

rent, lease, gift, loan, sell, distribute or transfer possession of the whole or any part of the Software.

Termination

This license is effective until terminated. This license will terminate automatically without notice if you fail to comply with any of its provisions.

Disclaimer

1. The Software is(to the extent permitted by law) supplied “as is” and SANYO and its suppliers expressly exclude all warranties, express or

LPSOLHGLQFOXGLQJEXWQRWOLPLWHGWRZDUUDQWLHVRIVDWLVIDFWRU\TXDOLW\¿WQHVVIRUSXUSRVHDQGQRQLQIULQJHPHQWVDYHWRWKHH[WHQWWKDWWKH

same are not capable of exclusion at law).

2.,QQRFLUFXPVWDQFHVZLOO6$1<2EHOLDEOHIRUDQ\GLUHFWLQGLUHFWFRQVHTXHQWLDORULQFLGHQWDOGDPDJHLQFOXGLQJORVVRISUR¿WVEXVLQHVV

interruption, loss of data or the cost of procurement of substitute goods, technology or services) arising out of the use or the inability to use

the Software (save to the extent that such liability is not capable of exclusion at law).

General

1. This End-User License will be governed by laws of England and the User may only bring claims in the English Courts and SANYO shall be

entitled to bring a claim in the courts of any jurisdiction.

2. This End-User License is governed by the laws of the State of California. The End-User and Sanyo agree that any action to enforce or inter-

pret the terms of this End-User License shall be brought only in the appropriate state or federal court located in Los Angeles County, Califor-

nia.The End-User and Sanyo hereby submit to the exclusive jurisdiction and venue of such court.

3. The above terms and conditions supersede any prior agreement, oral or written, between you and SANYO relating to the Software.

SERVICING

GROUND

GB GB

Step: 1 Mains Connection

N&RQQHFWWKHGLVSOD\XQLWWR9*$%1&DQG6FDUWFRQ-

nector as required.

1. Connect the in-line power connector to the Mains Inlet as shown

above.

2. Connect the power cord of the LCD monitor to a suitable wall outlet.

 As this product does not have a mains On/Off switch, please

ensure your mains plug is easily accessible.

 The LCD monitor is prepared for a mains voltage AC100 ~ 240V,

50Hz/60Hz. To completely switch off the mains, or when the

display unit is not to be used for an extended period of time, it is

advisable to disconnect the power cord from the power outlet.

 Please use the correct mains lead supplied with the set for your

area.

3. Warning:

To prevent injury, the unit must be securely attached to

the wall in accordance with the installation instructions.

WARNING! High voltages are used in the

RSHUDWLRQRIWKLVVHW5HIHUVHUYLFHWRTXDOL¿HG

service personnel.

Step: 2 Connections

NINPUT selection

7RVZLWFKHLWKHU$95*%$9$93&'9,RU1HWZRUNE\SUHVV-

ing the INPUT button on your remote control repeatedly.

1. AV1

SCART connection/CVBS/RGB/S-VIDEO.

2. RGB

TTL input (5V RGB signals) into SCART terminal.

<3E3U5*%+9FRQQHFWLRQ$9

Choose Y, Pb, Pr or RGB H/V connection by selecting AV2 Setting

in Set up menu (see page 10). You can connect your DVD player

to the Y, Pb, Pr terminals instead of using a scart lead. This can

VXSSRUWKLJKGH¿QLWLRQLQDQDORJXHFRPSRQHQWIRUP5*%+9FDQ

be used as a PC input via the BNC terminals. Both options support

a large range of resolutions (page 17). AV2-OUT can be used to

output the incoming AV2 signal to the other monitor.

4. AV3

Composite (CVBS) signal input.

AV3-OUT can be used to output the incoming AV3 signal to the

other monitor.

5. DVI-D (Digital Video Interface)

DVI-D supports a large range of resolutions as shown on page 17.

6. PC connection

PC input (PC-IN D-SUB). This input supports a large range of reso-

lutions as shown page 17. Audio can be connected via the 3.5mm

PC-AUDIO IN.

7. External Speaker

Output the audio signal from AV1, AV2, AV3, PC and DVI.

7KHVSHDNHULPSHGDQFHLVRKPV

8. AV2 / DVI AUDIO IN

Connect the audio output (stereo) from a computer or video equip-

ment connected AV2 or DVI.

9. Monitor Audio OUT

7KLVWHUPLQDOVRXWSXW¿[HGOHYHOIURP$8',2,1

10. RS232C IN/OUT

:KHQWKHPRQLWRULVFRQWUROOHGE\DFRPSXWHUFRQQHFWWRWKLVMDFN

with serial control cable.

You can connect to another monitor with RS232C OUT.

:KHQ\RXFRQQHFW3&ZLWK56&VHOHFW³21´DW1HWZRUN

standby in Installation mode.

If it is selected “OFF”, RS232C terminals do not functional. Also

select push button to “SERIAL PORT”.

INSTALLATION

7KLV¿JXUHLV&(/+:3

AC Mains Outlet

LD-Net

GB GB

Input

To switch input source from AV1, RGB, AV2, AV3,

PC, DVI or Network mode.

Standby

To switch the monitor on and off. Also see page 8.

To enter and exit the main menu, and sub menu.

Wide

To select the screen mode Full, Full All, Zoom

16:9, Title in 16:9, Zoom 14:9, Title in 14:9,

Normal or Natural wide.

Refer to page 12.

Recall

To display input selection information and the Time

set.

You can also select colour systems in AV1/AV3

mode as follows: AUTO

í PAL í SECAM í

NTSC í NTSC4.43 í PAL M í PAL N.

Auto PC

It can also be automatically adjusted in PC mode

by pressing this button for twice .

Back

Used to return to the previous menu.

Up and Down

To select the next or previous item.

Sound Mute

7RPXWHWKHVRXQGIURPWKHVSHDNHUV

The sound changes as follows: Normal volume

Mute.

Bass Expander

To get an emphasised bass sound ON or OFF.

TXT/TV

To select Teletext mode.

Main/Sub Picture Swap

To swap Main and Sub picture.

ON/OFF

To switch OFF í PIP(1) í PIP(2) í POP mode

in turn.

Refer to page 13.

Level Up/Down

To adjust the sound volume level or enter sub

menus.

F/OK

7RFRQ¿UPWKHLQLWLDOVHWWLQJLQWKHPHQX

Picture mode selector

Press the  button repeatedly to select the fol-

lowing picture mode.

Personal - Personal preference mode.

Standard - Normal viewing mode.

Dynamic - Suitable for brightly lit rooms.

Soft - Low contrast setting

Eco - Suitable for dimly lit rooms and gives a cin-

HPDOLNHHIIHFW

)UHH]H

To switch picture still on or off.

Green

Press this button for more than 5 seconds, installa-

tion mode will appear.

Remote control

Remote control battery installation

,QVWDOOWZR³$$´YROWEDWWHULHVVRWKDWWKH³´DQG³±´PDUNVRQWKH

EDWWHULHVPDWFKWKH³´DQG³±´PDUNVLQVLGHWKHXQLWLQWRWKHUHPRWH

control handset.

FOR EU USERS

7KHV\PEROPDUNDQGUHF\FOLQJV\VWHPVGHVFULEHGEHORZDSSO\WR(8

countries and do not apply to countries in other areas of the world.

Your SANYO product is designed and manufactured with high quality

materials and components which can be recycled and/or reused.

7KHV\PEROPDUNPHDQVWKDWHOHFWULFDODQGHOHFWURQLFHTXLSPHQW

batteries and accumulators, at their end-of-life, should be disposed of

separately from your household waste.

Note:

,IDFKHPLFDOV\PEROLVSULQWHGEHQHDWKWKHV\PEROPDUNWKLVFKHPL-

cal symbol means that the battery or accumulator contains a heavy

metal at a certain concentration. This will be indicated as follows: Hg:

mercury, Cd: cadmium, Pb: lead

In the European Union there are separate collection systems for used

electrical and electronic equipment, batteries and accumulators.

Please, dispose of them correctly at your local community waste col-

lection/recycling centre.

Please, help us to conserve the environment we live in!

INSTALLATION

GB GB

INSTALLATION

Controls and Menus

The LCD display has a Standby light to show there is power.

Switching into/from standby mode

The Standby mode is used for switching the LCD monitor off for short

periods of time. In standby mode the monitor is switched off but is still

receiving mains power.

L To turn the monitor into standby mode, press the  button.

The blue power indicator illuminates more brightly.

L To turn the monitor ON from standby mode, press the  button

again.

,I\RX¿QGWKHSRZHULQGLFDWRUÀDVKLQJGLVFRQQHFW

power cord from the power outlet and contact our

6HUYLFHGHVN

7KLVZDUQLQJLVDVLJQWROHW\RXNQRZWKDWWKH

power protection function of this TV set is now

operating.

Control buttons (bottom corner of back cover)

Menu button: Used to display or cancel main menu.

Input/4 button: Switch between AV1, RGB, AV2, AV3, PC , DVI

RU1HWZRUNPRGH,WLVDOVRXVHGWRSURYLGHVXE

menu selection from the Main Menu.

 or  buttons: provide up and down adjustments.

 button: To switch to standby mode (to switch off completely

disconnect the monitor from the power supply).

Menu Operation

Many of your monitors functions are controlled through the menu

function, using the remote control.

Picture

Brightness

Contrast

Color

Tint (only if NTSC equipment is detected)

Sharpness

White Tone

White Tone / R / G / B

Advanced Setting

DCDi / ACC/ACM / CCS / DNR / MPEG NR / Film Mode

Sound

Treble

Bass

Balance

Bass Expander

On / Off

Time

Setup

PC Adj.

Current Time

Schedule

Weekday

On Program

AV1 / RGB / AV2 / AV3 / PC / DVI / Network

Menu Setup

PIP / POP Setup

Initial Settings

Text Language

Tile Mode

AV2 Setting

Western / Eastern / Russian / Arabic / Farsi

Tile Mode Active / H/V_Sets / H/V Location / Bezel H/V Adjustment

RGBHV / YPbPr

Auto Adjust

H-Position

V-Position

Clock

Phase

Language / H/V-Position / Duration / Transparence

PIP/POP Mode / Main/Sub Source / PIP Position

Time

Action

Active

Power On / Power Off

On / Off

1 - 20

Current Weekday

XGA Mode

PC Power save

XGA / WXGA 1366x768

On / Off

During menu operation the bottom of the on screen display will show

which controls can be used for menu navigation.

Press the MENU button to enter the main menu. Whenever main

menu is accessed initially, PICTURE will be the default selection.

A sub menu is selected using the  or  button and pressing

the  or  button when the required sub menu is highlighted.

:KHQ\RXKDYH¿QLVKHG\RXFDQSUHVVWKHBACK button to return to

the previous menu, press the MENU button to exit the menu operation.

Picture menu

1. Press the MENU button. PICTURE will be the default selection.

Press the  or  button to enter.

Set the picture settings for your “personal” preference.

2. Use the  or  button to select eg. Brightness and the  or

 button to adjust levels.

N White Tone

May be used to adjust the color tone of the picture. Use the  or

 button to select White Tone and press the  or  button

to enter the sub menu. You can select Personal, Cool, Standard or

Warm settings by using the  or  button. To adjust the color

tone of the picture by using the  or  button to select Red(R),

Green(G) or Blue(B) and the  or  button to adjust levels.

These settings will be stored in personal mode automatically.

GB GB

MENU OPERATION

Picture menu

NAdvanced settings

Use the  or  button to select Advanced settings and press

the  or  button to enter the sub menu as follows.

DCDi (Directional Correlational Deinterlacing) is used to process

moving angled edge in deinterlacing to get the smoothest and most

natural image. Press the  or  button on the remote control to

select On or Off.

ACC/ACM (ACC: Adaptive Contrast and Color; ACM-II: Active Color

Management-II) is used to select adaptive Brightness, Contrast and

tone control. Press the  or  button on the remote control to

select suitable mode either Vivid, Cinema, Sport or Off.

CCS (Cross Color Separation) is used to remove residual chroma

information from luminance signal which is the result of imperfect

decoding of composite video. Press the  or  button on the

remote control to select either Auto, Standard or Off.

DNR (Digital Noise Reduction) is available for noise reduction. Press

the  or  button on the remote control to select either Auto,

Low, Mid, High or Off.

MPEG NR (MPEG Noise Reduction): Removes unwanted ringing and

EORFNQRLVHIURPLPDJHVWKDWKDYHXQGHUJRQH03(*RU-3(*FRP-

pression and decompression. Press the  or  button on the

remote control to select On or Off.

Film Mode,QYHUVHSXOOGRZQ)LOPYV9LGHR'HWHFW¿OP3HUIRUPHG

on material which underwent technologic conversion to video. Press the

 or  button on the remote control to select On or Off.

Sound menu

Press the MENU button and select Sound using the  or  but-

tons, press the  or  button to enter.

Select and adjust to obtain the best sound settings for your environ-

ment using the  or  button to select Treble, Bass or Balance

and the  or  button to adjust levels.

Bass Expander can also be selected using the  or  button

and pressing the  or  button to select On or Off.

These settings automatically store when you exit the menu.

Press the BACK button to return to the previous menu.

Press the MENU button to exit menu operation.

Time menu

Press the MENU button and select Time using the  or  but-

tons, press the  or  button to enter. Press the BACK but-

ton to return to the previous menu. Press the MENU button to exit

menu operation.

N Current Weekday

8VHWRVHWFXUUHQWZHHNGD\XVLQJWKH or  button.

N Current Time

Use to set the current time using the Numeric buttons.

 Other items in Time Menu should not be selected until Current

Time has been set.

N Schedule

Use to set up to 20 separate time schedules for “Power On” or “Power

Off”, select 1 ~ 20 using the  or  button.

N Weekday

8VHWRVHWWKHVFKHGXOHIRU³3RZHU2Q´RU³3RZHU2II´RIDQ\ZHHNGD\

from Sunday through to Saturday or Everyday using the  or 

button.

N Time

Use to set the schedule for “Power On” or “Power Off” of any time us-

ing the Numeric buttons.

N Action

Use to set the schedule for “Power On” or “Power Off” active using

the  or  button.

You can set Power On timer in Time menu selecting “ON” in “On

Timer Function” in Installation Mode. If it is selected “OFF”, Power On

display in Time menu does not functional.

N On Program

Use to select AV1, RGB, AV2, AV3, PC, DVI or Network for the

schedule of “Power On” using the  or  button.

N Active

Use to select ON or OFF using the  or  button. When set

³2))´WKHDERYHLWHPV³6FKHGXOH´³:HHNGD\´³7LPH´³$FWLRQ´RU³21

Program” will be inactive.

Use NUMERIC buttons [0 ~ 9] to set On Time. (Action “Power On”

– 00:00 ~ 23:59)

 Once On Time has been set, when the set time is reached, the

monitor will leave the stand-by status and enter to the source

automatically.

 After On Time has been set, you can go on watching other pro-

grams. When the set time is reached, the monitor will automatically

switch to the preset program.

 On Program can only be selected whenAction (Power On) has

been set.

 Action (Power Off) can be set to turn the monitor into standby at a

selected time

Once On Program has been set, when the set time is reached, the

monitor will enter to the preset source automatically.

Use the  or  button to select On program, AV1, RGB, AV2,

AV3, PC, DVI or Network.

Setup menu

Press the MENU button and select Setup using the  or  but-

tons, press the  or  button to enter. Press the BACK but-

ton to return to the previous menu. Press the MENU button to exit.

N Menu Setup

Whenever Setup menu is accessed initially, Menu Setup will be the

default selection. Press the  or  button to enter the sub menu.

GB GB

MENU OPERATION

Language is used to select the preferred language. Use the  or

 button to select English, French, German, Italian, Spanish or

Dutch.

H-Position changes the OSD position horizontally by using the 

or  button.

V-Position changes the OSD position vertically by using the  or

 button.

Duration is used to set the display time of the MENU by using the

 or  button. (5 ~ 120 seconds)

Transparence is used to adjust transparence of menu display. Use

the  or  button to adjust levels.

N PIP/POP Setup

Use the  or  button to select PIP/POP Setup and press the

 or  button to enter the sub menu.

PIP/POP Mode: Using the  or  button select the most suit-

able mode PIP1, PIP2, POP or Off. (Please refer to page 13.)

 When Mode is set to Off, Sub Source and PIP Position will not

ZRUN

Main Source is used to select input source (AV1, RGB, AV2, AV3, PC,

'9,RU1HWZRUNIRUPDLQSLFWXUHE\XVLQJWKH or  button.

Sub Source is used to select input source (AV1, AV2, AV3, PC or

DVI) for sub picture by using the  or  button.

For a combination of main picture and sub picture: only DVI or

1HWZRUNLQSXWFDQDVVHPEOHZLWKRWKHULQSXWVRXUFH)RUH[DPSOH

if main source is selected as AV1 input, then the sub source must

EH'9,RU1HWZRUNLQSXW

PIP Position: Using the  or  button it can be selected Top

Left, Top Right, Bottom Right or Bottom Left.

N Initial Settings

This function returns all setting values except for Installation Mode.

N Text Language

Use the  or  button to select Tex t Language and press the

 or  button to select Western, Eastern, Russian, Arabic or

Farsi.

N Tile Mode

This function allows you to split an image to suit your monitor grid

format to create a video wall.

Use the  or  button to select Tile Mode and press the  or

 button to enter the sub menu as follows.

Tile Mode Active can be set On or Off using the  or  but-

ton.

H_Sets is used to divide the horizonal picture into more than one

part, but the most is 5 parts (5 monitors).

V_Sets is used to divide the vertical picture into more than one part,

and the most is also 5 parts (5 monitors). Using the  or  but-

ton to set.

H Location is used to select one part of the horizonal picture to dis-

play on the current LCD Monitor using the  or  button.

V Location is used to select one part of the vertical picture to display

on the current LCD Monitor using the  or  button.

%H]HO+$GMXVWPHQW is used to align the image horizontally with

respect to the other monitors in the video wall to accommodate the

bezel width using the  or  button. (0 ~ 10)

%H]HO9$GMXVWPHQW is used to align the image vertically with respect

to the other monitors in the video wall to accommodate the bezel

width using the  or  button. (0 ~ 10)

N AV2 Setting

Use the  or  button to select AV2 Setting and press the 

or  button to select YPbPr or RGBHV.

Connect your PC to either PC-IN or RGBHV on the rear of the set.

Once connected select PC mode or AV2 (RGBHV, see page 6 for AV2

input settings) via the INPUT button on your remote control.

The set will become a monitor for the PC.

N XGA Mode

Use the  or  button to select XGA Mode and press the  or

 button to select XGA or WXGA 1366 x 768.

N PC Power Save

The monitor set automatically turns off with no PC input signal and

ZDNHVXSZLWKVLJQDOZKLOH3&3RZHU6DYHLVDFWLYH

Use the  or  button to select PC Power Save and press the

 or  button to select ON or OFF.

PC Adj. menu

Press the MENU button and select PC Adj. using the  or 

buttons, press the  or  button to enter. Press the BACK

button to return to the previous menu. Press the MENU button to

exit menu operation.

Auto Adjust is used to automatically detect incoming signal, and

adjust itself to optimize its performance by using the  or 

button. If the image is not displayed properly, a manual adjustment is

required (Refer to following adjustments).

H-Position is used to move the horizontal picture position by using

the  or  button.

V-Position is used to move the vertical picture position by using the

 or  button.

ClockLVXVHGWRHOLPLQDWHÀLFNHUIURPWKHLPDJHE\XVLQJWKH or

 button.

Phase is used to eliminate disorder from the image by using the 

or  button.

GB GB

INSTALLATION MODE

Installation Mode

On program

Tuner Menu

Max Volume

Winter mode

RC inhibition

Child Lock

Address

Baud rate

Panel protection

AV Auto shut off

Network Standby

On Timer Function

LED light setting

DCR

Network initial

Temperature Error

IP Address

Subnet

Gateway

DNS

Off

19200

Off

>>>

000000000000

G2.02 0000

Select Adjust

Exit

This LCD monitor allows you to set up the following:

SETTING PROCEDURE

1. Press and hold the GREEN button on the remote control for 5

seconds. (Installation Mode will appear)

2. Use the  or  button to highlight each option, use the  or

 button to adjust each option. Press the MENU button to exit

the mode.

N On Program

Select ON program using the  or  button, select the start up

position using the  or  buttons.

2II$95*%$9$93&'9,RU1HWZRUN

N Max Volume

Select Max volume using the  or  button, use the  or 

buttons to set the maximum volume required.

N Winter mode

This Function can be activated when the LCD monitor is used dur-

LQJFROGWHPSHUDWXUHFRQGLWLRQVDSSUR[LPDWHO\Û)Û&RUEHORZWR

maintain picture performance.

Using the  or  button select winter mode, once highlighted you

can select ON or OFF by pressing the  or  button.

IMPORTANT: The AC cord should not be disconnected during the

operation of Winter mode function.

When in winter mode, power consumption is higher than normal

standby consumption. This is entirely due to the operation of heating

circuitry. We strongly recommend to turn off Winter mode when the

DPELHQWWHPSHUDWXUHLVDERYHÛ)Û&

N RC inhibition

You can prevent unwanted remote control operation by selecting RC

Inhibition.

Select using the  or  button. Press the  or  button to

select On or Off.

To re-instate RC operation press and hold the green button on the

remote control and select RC inhibition OFF.

N Child Lock

You can prevent unwanted operation of the LCD monitor via the

buttons on the rear of the monitor.

Select using the  or  button. Press the  button to select

2QRU2))7KH³&KLOG/RFN´26'ZLOODSSHDULIEXWWRQVDUHSUHVVHG

ZKHQFKLOGORFNLV2Q

6WDQGE\RSHUDWHVQRUPDOO\ZKHQFKLOGORFNLVVHW³2Q´

N Address

Set the address for the LCD monitor (0 ~ 999).

LSetting the monitor address in RS232 mode

(DFKPRQLWRUFDQKDYHDVSHFL¿F$GGUHVVZKLFKKHOSVFRPPDQG

that monitor individually and will not effect to other monitors con-

nected to a controlling PC Address format command.

The addressing format command is used for operating multiple

monitor sets from a single PC via the RS232C command line.

N Baud rate

Select Baud rate using the  or  button. To set transmission

speed RS232 or LD-NET communication for 19200 or 9600 Baud rate

by pressing the  or  button.

N Panel protection

7RSUHYHQWLPDJHVWLFNLQJZKLFKPD\RFFXUVKRZLQJVWLOOSLFWXUHIRUD

long time, select “Panel Protect” using the  or  button, once

highlighted you can select ON or OFF by pressing the  or 

button.

N AV Auto shut off

With no picture input signal to AV1, RGB, AV2(YPbPr), AV3, DVI,

1HWZRUNVHWWXUQVRIIDXWRPDWLFDOO\6HOHFW³$9$XWR6KXW2II´XVLQJ

the  or  button, once highlighted you can select On or Off by

pressing the  or  button.

N Network Standby

<RXFDQVDYHSRZHUFRQVXPSWLRQVHOHFWLQJ³2II´DW1HWZRUN6WDQGE\

in Installation mode, both RS232C and LD-NET do not functional. To

PDNHWKHPIXQFWLRQDOVHOHFW³21´LQWKLVPHQX

N On Timer Function

You can save power consumption selecting “Off” at On Timer function

in Installation mode. On Timer in Time menu does not functional. To

PDNHWKHPIXQFWLRQDOVHOHFW³21´LQWKLVPHQX

N LED Light setting

Select LED Light setting using the  or  button, once highlight-

ed you can select On or Off by pressing the  or  button.

N DCR

The picture contrast improved while DCR is ON. Select DCR using

the  or  button, once highlighted you can select On or Off by

pressing the  or  button.

N Network Initial

This function automatically installs the IP Address, Subnet, Gateway

and DNS information.

N Temperature Error

The recorded number of abnormal temperature is occurred is indi-

cated here.

N IP Address/Subnet/Gateway/DNS

These 4 items display the LD-Net information. If LD-NET is NOT con-

nected, all the items would be displayed as “000000000000”.

 Disconnecting the mains supply before exiting Installation Mode will

cancel the following features On program, RC inhibition, Address

and Baud Rate.

GB GB

OPERATION

6HOHFWLRQRISLFWXUHVL]H

Select screen size from FULL, FULL ALL, ZOOM 16:9, TITLE IN 16:9,

ZOOM 14:9, TITLE IN 14:9, NORMAL or NATURAL WIDE by pressing

the WIDE button repeatedly on the Remote Control.

 When in AV2 (RGBHV) or PC mode FULL or NORMAL can be

selected.

Note: Full - Set display area 100%

 Only in DVI or AV2 (YPbPr) displaying high resolution content

FULL and FULL ALL are selectable.

Note: FULL - Set display area 95%

FULL ALL - Set display area 100%

All other inputs AV1, AV3, DVI or AV2 (YPbPr) (displaying lower reso-

lutions) can select all picture sizes.

N Full/Full All

N Zoom 16:9

N Title in 16:9

N Zoom 14:9

N Title In 14:9

N Normal

N Natural Wide

4:3 14:9 16:9 Letterbox Video

The whole screen

LV¿OOHGVWUHWFKLQJ

the width.

The whole screen

LV¿OOHGVWUHWFKLQJ

the height slightly

at the edges.

The whole screen

LV¿OOHGZLWKWKH

corrrect picture

ratio.

7KHEODFNEDUV

top and bottom

are present and

the height is

compressed.

4:3 14:9 16:9 Letterbox Video

The correct

picture width is

maintained but

the top and bot-

tom are cropped.

Zooms in slightly

cropping the top

and bottom.

Zooms in slightly

cropping the top

and bottom.

7KHEODFNEDUV

top and bottom

are smaller and

the picture height

is compressed

slightly.

4:3 14:9 16:9 Letterbox Video

TITLES ON SCREEN

As Zoom (16:9),

but bottom is

compressed even

more to allow

subtitles to be

seen.

As Zoom (16:9),

but bottom is

compressed even

more to allow

subtitles to be

seen.

As Zoom (16:9),

but bottom is

compressed even

more to allow

subtitles to be

seen.

As Zoom (16:9),

but bottom is

compressed even

more to allow

subtitles to be

seen.

4:3 14:9 16:9 Letterbox Video

The correct

picture width is

maintained but

the top and bot-

tom are cropped.

Zooms in slightly

cropping the top

and bottom.

Zooms in slightly

cropping the top

and bottom.

7KHEODFNEDUV

top and bottom

are smaller and

the picture height

is compressed

slightly.

4:3 14:9 16:9 Letterbox Video

TITLES ON SCREEN

As zoom (14:9),

but bottom is

compressed even

more to allow

subtitles to be

seen.

As zoom (14:9),

but bottom is

compressed even

more to allow

subtitles to be

seen.

As zoom (14:9),

but bottom is

compressed even

more to allow

subtitles to be

seen.

As zoom (14:9),

but bottom is

compressed even

more to allow

subtitles to be

seen.

4:3 14:9 16:9 Letterbox Video

The correct ratio

is maintained with

EODFNEDUVRQWKH

left and right.

%ODFNEDUV

left and right,

picture height is

stretched.

%ODFNEDUV

left and right,

picture height is

stretched.

%ODFNEDUVOHIW

right, top and

bottom.

4:3 14:9 16:9 Letterbox Video

Stretches the pic-

ture horizontally

WR¿OOWKHVFUHHQ

The picture is

more stretched at

the edges.

The height is ex-

SDQGHGWR¿OOWKH

whole screen.

7KHSLFWXUH¿OOV

the screen and

is proportionally

correct.

7KHEODFNEDUV

top and bottom

remain and the

height is com-

SUHVVHGWR¿WWKH

picture area.

GB GB

OPERATION

PIP/POP Operation

Using this function, you can enjoy a DVI or Network program and an

image (AV1, AV2, AV3 or PC input) at the same time.

Press the ON/OFF button on the Remote Control repeatly to select

PIP1, PIP2, POP or OFF mode.

During the PIP/POP mode, press the Main/Sub Picture Swap but-

ton will switch the location for main and sub picture.

 Only the sound on the main picture is heard from the monitor

VSHDNHU7KHVRXQGRQWKHVXESLFWXUHFDQQRWEHKHDUG

 The details for PIP/POP operation (eg,location for sub picture or

input source for any picture,etc.), please refer to page 10.

N PIP1 mode

N OFF mode

N PIP2 mode

N POP mode

The left picture is main picture, the right picture is sub picture.

GB GB

OPERATION (IN TEXT MODE)

Teletext Operation

Teletext is only available via external sources.

Teletext mode can be operated by the following buttons on the Re-

mote Control.

 Some buttons have dual functions.

TXT/TV

Press TXT/TV button to select teletext. Press again will display:

AV mode: AV/TEXT mode/MIX mode/AV.

Note:

MIX mode: AV (broadcast image) screen and the contents of TEXT

(superimposed) are displayed simultaneously.

CANCEL mode: TEXT/MIX MODE is cancelled temporarily and AV

image is displayed.

If the signal is removed or disconnected, the monitor will revert to a

EOXHEDFNJURXQGZLWK³1RVLJQDO´PHVVDJHRQWKHVFUHHQ

If the TXT/TV button is pressed during the CANCEL mode, the CAN-

CEL mode will be cancelled, and full text will resume.

Text Subcode

Press this button, “110/....” will be displayed (e.g. the current page is

110).

And press the NUMERIC buttons(0 ~ 9) to enter the sub page.

For example, to select sub page 4, press NUMERIC buttons 0 - 0 - 0

- 4, and “110/0004” will be displayed.

:KHQ¿QLVKHGSUHVVWKHWH[WVXEFRGHEXWWRQWRUHWXUQWRQRUPDO

operation.

Text Index

Press this button to select one of the teletext index pages in TEXT,

MIX or CANCEL mode.

Text Red

Use to select the red topic or page number at the bottom of the text

page.

Text Green

Use to select the green topic or page number at the bottom of the text

page.

Text Yellow

Use to select the yellow topic or page number at the bottom of the text

page.

Text Blue

Use to select the blue topic or page number at the bottom of the text

page.

Text Cancel

Press the TEXT CANCEL button in TEXT or MIX mode, the TV pic-

ture appears on the screen.

Press this button once again or press TXT/TV button, CANCEL mode

will be cancelled.

In CANCEL mode, “CAN” is always displayed on the upper left of the

screen.

Text Hold

Press Text Hold button to stop page request and updating.

HOLD ON:

The Hold symbol will appear instead of the page number.

Update of TELETEXT is forbidden. It holds on the current TEXT

screen display now.

HOLD OFF:

The hold symbol is replaced with the page number.

TELETEXT page data is updated.

The present page is re-requested. (header roll)

7H[W+ROGEXWWRQZLOORQO\ZRUNZKLOVWLQ7(;70RGH

Text Reveal

Press Text Reveal button to reveal hidden items on the text page.

Some pages such as quiz pages have the answers hidden. The button

PD\KDYHWREHKHOGWRNHHSWKHDQVZHURQWKHVFUHHQRUSUHVVDJDLQ

to remove the answer.

In Reveal OFF, this indication is not given.

Text Reveal buttonZLOORQO\ZRUNZKLOVWLQWH[WPRGH

Page Up and Down

To select the next or previous page.

Volume Up/Down

To adjust the sound volume level.

7H[W6L]H

Press Text Size button to enlarge the top half of the text page.

Press Text Size button again to enlarge the bottom half of the text

page.

Press Text Size button again to return to the normal size page.

(Normal/top half enlargement/bottom half enlargement/normal)

Note:

During the top half or bottom half enlargement mode, if a page re-

quest is performed by [0 ~ 9] numeric buttons or the TEXT INDEX

button, it will return to normal mode and a page will be requested.

If HOLD ON/OFF is performed during the top half enlargement mode,

it will hold the top half enlargement mode. (HOLD symbol will display)

If HOLD ON/OFF is performed during the bottom half enlargement

mode, it will hold the bottom half enlargement mode. (HOLD symbol

will NOT display)

GB GB

SPECIFICATIONS/HELPFUL HINTS

6SHFL¿FDWLRQ

&RPPRQVSHFL¿FDWLRQ

Power source: 100 ~ 240V 50Hz/60Hz

Colour system: PAL/NTSC/NTSC4.43/SECAM

AV terminal

AV1: Scart CENELEC Standard

Input: Composite video, RGB (5V RGB with 5V sync to pin 14)

and audio-L/R

Output: composite video from AV3 and audio L/R

AV2: BNC

Input: RGB, H and V/Y, Pb, Pr and audio L/R

Output: RGB, H and V/Y, Pb, Pr

AV3: BNC

Input: Composite video

Output: Composite video

Audio Monitor Out: CINCH L/R

Audio Speaker Out: 2 x 6W

DVI

Input: DVI-D GROUP Standard

Input:0LQL'68%3,1DQG$XGLRPP-DFN

Serial Port: RS232C: Input/Output

Net Organiser: POA-LN02 (optional)

When ordering these products, give the Name and Type No. to the

sales dealer.

Helpful hints

N NO PICTURE NO SOUND

L&KHFNLIPRQLWRULVSOXJJHGLQ

L&KHFNPRQLWRULVQRWLQVWDQGE\PRGH

N POOR PICTURE

LAdjust BRIGHTNESS/CONTRAST levels (too low).

N12&2/2853,&785(2.

LAdjust COLOUR control.

L&KHFNOHDGFRQQHFWLRQV

LDoes the signal input have colour.

N REMOTE CONTROL DOES NOT WORK

L&KHFNEDWWHULHVDUHLQVHUWHGFRUUHFWO\

L&KHFNFRQGLWLRQRIEDWWHULHV

L&KHFNWRVHHLIUHPRWHFRQWUROLQKLELWLVVHW21

N3,&785(2.126281'

L&KHFNH[WHUQDOVSHDNHUVDUHFRQQHFWHGFRUUHFWO\

L&KHFNOHDGFRQQHFWLRQVWRH[WHUQDOHTXLSPHQW

L&KHFNYROXPHWXUQHGGRZQRUPXWHVHOHFWHG

Model name Contrast Ratio

Screen

(inches/cm)

(viewing measured

diagonally)

Display Native

Resolution

Veiwing angles

Dimension

(W x H x D)

Weight (kg)

CE42LH2R

1000:1 42"/106.7 cm 1920 x 1080 H: 178°, V: 178°

1027 x 620 x 178.5 mm

32.8

CE42LH2DPB 33.8

CE42LH2WP 1027 x 620 x 183 mm 37.5

L7KHVSHFL¿FDWLRQVDUHVXEMHFWWRFKDQJHZLWKRXWQRWLFH

LLCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels

(0.01% or less) may be ineffective by the characteristics of the LCD panels.

GB GB

DIMENSIONS

989.0

1027.0

165.9

418.4 418.4

200.0

400.0

200.0

400.0

100.0

41.8

126.0

50.8

17.6

953.0

402.9

417.9

292.0

300.6

178.5

43.7

930.25

925.4

(WALL MOUNT SCREW)

10 x M6, 1.0 PITCH x 12MM

ø4.2

(RC RECEIVER)

VIEWING AREA(H)

620.0

546.0

523.0

VIEWING AREA(V)

Control buttons

ø4.2

(LED INDICATOR)

Handles x 2

Cables exit terminal cover

Unit: mm

N CE42LH2WP

GB GB

PC/DVI-D/COMPONENT SIGNAL SUPPORT TIMING LIST

N DVI-D signal support timing

N Component signal support timing

Resolution

+RUL]RQWDO

Frequency

N+]

Vertical

Frequency

+]

Remark

720 x 480 15.735 60i SDTV 480i

720 x 576 15.625 50i SDTV 576i

720 x 480 31.25 60p SDTV 480p

720 x 576 31.25 50p SDTV 576p

1280 x 720 45.00 60p HDTV 720p

1280 x 720 37.50 50p HDTV 720p

1920 x 1080 33.75 60i HDTV 1080i

1920 x 1080 28.13 50i HDTV 1080i

Resolution

+RUL]RQWDO

Frequency

N+]

Vertical

Frequency

+]

Remark

640 x 480 31.43 59.88 VGA VESA 60Hz

640 x 480 37.86 72.81 VGA VESA 72Hz

640 x 480 37.5 75 VGA VESA 75Hz

640 x 480 34.97 66.6 MAC LC 13"

640 x 480 35 66.67 MAC_NORMAL 13"

800 x 600 35.16 56.25 SVGA VESA 56Hz

800 x 600 37.88 60.32 SVGA VESA 60Hz

800 x 600 46.875 75 SVGA VESA 75Hz

832 x 624 49.72 74.55 MAC_NORMAL 16"

1024 x 768 48.36 60 XGA VESA 60Hz

1024 x 768 60.23 75.03 XGA VESA 75Hz

1024 x 768 56.47 70.07 XGA VESA 70Hz

1024 x 768 60.24 75.08 MAC_NORMAL 19"

1152 x 870 68.68 75.06 MAC_NORMAL 21"

1280 x 1024 63.98 60.02 SXGA VESA 60Hz

720 x 480 31.7 59.94 480p

720 x 480 15.73 59.94 480i

768 x 575 31.25 50 575p

768 x 575 15.63 50 575i

1280 x 720 37.5 50 720p - 50Hz

1280 x 720 45 60 720p - 60Hz

1366 x 768 48.36 60 WXGA

1360 x 768 47.7 60 WXGA

1920 x 1080 28.125 50 1080i - 50Hz

1920 x 1080 33.75 60 1080i - 60Hz

1920 x 1080 56.25 50 HDTV 1080p - 50Hz

1920 x 1080 67.5 60 HDTV 1080p - 60Hz

1920 x 1080 27.00 24 HDTV 1080p - 24Hz

1920 x 1080 28.13 25 HDTV 1080p - 25Hz

1920 x 1080 33.75 30 HDTV 1080p - 30Hz

N PC signal support timing

Resolution

+RUL]RQWDO

Frequency

N+]

Vertical

Frequency

+]

Remark

720 x 400 31.47 70.09 DOS (VGA)

640 x 480 31.43 59.88 VGA VESA 60Hz

640 x 480 37.50 75.00 VGA VESA 75Hz

640 x 480 37.86 72.81 VGA VESA 72Hz

640 x 480 43.27 85.00 VGA VESA 85Hz

640 x 480 35.00 66.67 Mac. 13

640 x 480 34.97 66.60 Mac LC 13"

800 x 600 35.16 56.25 SVGA VESA 56Hz

800 x 600 37.88 60.32 SVGA VESA 60Hz

800 x 600 46.875 75.00 SVGA VESA 75Hz

800 x 600 34.50 55.38 SVGA

800 x 600 38.00 60.51 SVGA

800 x 600 53.67 85.06 SVGA VESA 85Hz

832 x 624 49.72 74.55 Mac. 16

1024 x 768 48.36 60.00 XGA VESA 60Hz

1024 x 768 56.47 70.07 XGA VESA 70Hz

1024 x 768 60.02 75.03 XGA VESA 75Hz

1024 x 768 48.50 60.02 XGA

1024 x 768 60.31 74.92 XGA

1024 x 768 61.00 75.70 XGA

1024 x 768 68.68 85.00 XGA VESA 85Hz

1024 x 768 60.24 75.08 MAC_Normal 19"

1280 x 720 37.5 50.00 720p - 50Hz

1280 x 960 60.00 60.00 SXGA VESA 60Hz

1280 x 1024 79.976 75.025 SXGA VESA 75Hz

1280 x 1024 63.370 60.01 SXGA

1280 x 1024 63.34 59.98 SXGA

1280 x 1024 63.74 60.01 SXGA

1280 x 1024 63.79 60.18 SXGA

1280 x 1024 63.90 60.00 SXGA

1280 x 1024 81.13 76.107 SXGA

1152 x 900 61.20 65.20 SXGA

1152 x 900 61.85 66.00 SXGA

1152 x 900 71.40 75.60 SXGA

1400 x 1050 65.35 60.12 SXGA +

1400 x 1050 65.12 59.90 SXGA +

1152 x 870 68.68 75.06 MAC_Normal 21"

1280 x 1024 80.00 75.00 Mac II

1600 x 1200 75.00 60.00 UXGA VESA 60Hz

1366 x 768 48.36 60.01 WXGA

1360 x 768 47.73 60.03 WXGA

1920 x 1080 28.125 50.00 1080i - 50Hz

1920 x 1080 33.75 60.00 1080i - 60Hz

The monitor can be automatically adjusted in pc mode when receiving a stan-

dard VESA signal. It will be displayed as XGA when the monitor is receiving a

XGA or WXGA signal.

Depending on the condition of signals and the type and length of cables, these

signals may not be properly viewed.

To save the XGA Mode 1366 x 768 setting switch the monitor off then on using

the standby button.

GB GB

RS232C COMMAND TABLES

N Functional Execution Command Table

Command Item

C00 POWER ON

C01 POWER OFF

C03 POWER ON/ OFF (toggle)

C10 Wide toggle

C22 Input

C24 Wide “Natural” direct

C25 Wide “Zoom 16:9” direct

C26 Wide “Title in 16:9” direct

C27 Wide “Zoom 14:9” direct

C28 Wide “Title in 14:9” direct

C29 Wide “Full” direct

C30 Picture

C0F Wide “Normal” direct

C70 AV1 direct

C71 RGB direct

C72 AV2 RGBHV direct

C73 AV2 YPbPr direct

C74 AV3 direct

C75 DVI direct

C76 PC direct

C64 PC Auto adjust

C92 Factory settings

CF PSAVE ON Power save ON

CF PSAVE OFF Power save OFF

CF CLOK ON &KLOGORFN21

CF CLOK OFF &KLOGORFN2))

CF DEA RMCY RC inhibition OFF

CF DEA RMCN RC inhibition ON

N Image control Read Command Table

Status read command Item

CR BRIGHT Status of Brightness.

CR CONT Status of Contrast.

CR COLOR Status of Color.

CR TINT Status of Tint.

CR SHARP Sharpness.

CR WBAL

Status of White Balance Mode informa-

tion.

CR WBAL-R Status of White Balance Red.

CR WBAL-G Status of White Balance Green.

CR WBAL-B Status of White Balance Blue.

CR NZRED Status of Noise reduction setting.

CR FILM Status of Film mode setting.

CR IMAGE

Status of Image selection.

(The same as PICTURE mode)

CR DCDI Status of DCDi setting.

CR ACCACM Status of ACC/ACM setting.

CR CCS Status of CCS setting.

CR MPEGNR Status of MPEG NR setting.

N PC Read Command Table

Status read command Item

CR H-POS Status of Horizontal position.

CR V-POS Status of Vertical position.

CR PHASE Status of PHASE value.

CR CLOCK Status of CLOCK value.

N Input Read Command Table

Status read command Item

CR INPUT Status of Input selection.

CR SOURCE Status of Input source mode.

CR SYSTEM Status of system of Input mode.

N Screen Read Command Table

Status read command Item

CR SCREEN

Status of screen size.

(The same of WIDE mode)

GB GB

RS232C COMMAND TABLES

N Time Read Command Table

Status read command Item

CR PANELH

Status of accumulated lifetime of panel.

(The same as CR_LAMPH Command)

CR MONH

Status of accumulated lifetime of monitor.

7KHVDPHDV&5B352-+&RPPDQG

N UK5 Read Command Table (Basic Command)

Command Item Note

CR0 Power On, Standby, power error,

CR1 Input Mode AV1, AV2, . . . , DVI, PC

CR WIDE Wide mode Auto, Normal, Full, . . .

CR PICTURE Picture mode Dynamic, Standard, . . .

CR SIGNAL Signal existence Signal/No signal

CR CHILD &KLOGORFN On/Off

CR PSAVE Power save On/Off

CRTM Panel usage time –––

CR RMC RC inhibition On/Off

CR MDL Model number Model number

N Error code Table

Error code Note

• Receiving the data that cannot be decoded.

• The wrong indication of parameter.

:URQJ¿JXUHGQXPEHURUZURQJZRUGLVLQFOXGHG

000 Normal receiving. (no error)

102

If the command of out of range is directly entered

valuable parameter.

103

No matching with Hardware.

(Command for optional function which is not

equipped)

201

If the command of “Out of range” is entered by

inclement or decrements by numeric value.

301

While capturing the picture, no execution. Wait and

transmit command again.

402

While PIN code is in operation, no execution.

Wait and transmit command again.

101 The errors not including above.

N Sound control Read Command Table

Status read command Item

CR VOLUME Status of volume value.

CR MUTE Status of MUTE.

N Other Read Command Table

Status read command Item

CR STATUS Status of the operation of the monitor.

CR SIGNAL Status of with or without signal.

CR FREEZE Status of Freeze setting.

CR FANLOCK 6WDWXVHVRIIDQORFNHUURU

CR TEMP Status of current temperature value.

N Setting Read Command Table

Status read command Item

CR LANG Status of Language selection.

CR P-MANE Status of Power management setting.

CR TILE Status of Tile mode ON/OFF setting.

CR TILE-HSETS

Status of Tile mode, the number of

Horizontal array.

CR TILE-VSETS

Status of Tile mode, the number of

Vertical array.

CR TILE-HLOCAT

Status of Tile mode, the number of

Horizontal allocation.

CR TILE-VLOCAT

Status of Tile mode the number of Verti-

cal allocation.

&57,/(%=/+$'-

Status of Tile mode, the width of bezel

(Horizontal).

&57,/(%=/9$'-

Status of Tile mode, the width of bezel

(Vertical).

CR ONPROG Status of On Program information.

CR WINTERMODE Status of Winter mode Information.

CR PANELPROTECT Statuses of Panel protect Information.

CR LEDLIGHT Status of LED light Information.

CR AVAUTOSHUT Status of AV auto shut OFF Information.

CR CHILDLOCK 6WDWXVHVRI&KLOGORFN,QIRUPDWLRQ

CR RCINHIBITION Status of RC Inhibit Information.

GB GB

N7RAK/ N7RBK/ N7RPK

6$1<2(OHFWULF&R/WG

La page charge ...

Sanyo CE42LH2R Manuel utilisateur

Marque: Sanyo

Modèle: CE42LH2R

Catégorie: Affichages publics

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Sanyo CE42LH2R User manual

Sanyo CE42LH2R Manuel utilisateur

Ce manuel convient également à

Sanyo CE42LH2R Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents