Sony HT-CT800 Mode d'emploi

K:\081\Win7 CS\New folder\4687804141_HT-CT800_GB-FR-PR-

AR\00COV-HTCT800E3\010COV.fm

masterpage:

Right

HT-CT800

4-687-804-14(1)

HT-CT800

Operating Instructions

GB

Manuel d’instructions

FR

Sound Bar

4-687-804-14(1)

Sound Bar

The software of this system may be updated in the future. To find out details on any

available updates, please visit the following URL.

http://www.sony-asia.com/section/support

Le logiciel de ce système est susceptible d’être mis à jour. Pour en savoir plus sur les

éventuelles mises à jour disponibles, visitez l’URL suivante.

http://www.sony-asia.com/section/support

K:\081\Win7 CS\New folder\4687804141_HT-CT800_GB-FR-PR-

AR\00COV-HTCT800E3\010BCO.fm

masterpage:

Right

HT-CT800

4-687-804-14(1)

HT-CT800

PR

AR

Sound Bar

2

GB

Do not install the appliance in a

confined space, such as a bookcase or

built-in cabinet.

To reduce the risk of fire, do not cover

the ventilation opening of the appliance

with newspapers, tablecloths, curtains,

etc.

Do not expose the appliance to naked

flame sources (for example, lighted

candles).

To reduce the risk of fire or electric

shock, do not expose this appliance to

dripping or splashing, and do not place

objects filled with liquids, such as vases,

on the appliance.

The unit is not disconnected from the

mains as long as it is connected to the

AC outlet, even if the unit itself has been

turned off.

As the main plug is used to disconnect

the unit from the mains, connect the

unit to an easily accessible AC outlet.

Should you notice an abnormality in the

unit, disconnect the main plug from the

AC outlet immediately.

Do not expose batteries or appliances

with battery-installed to excessive heat,

such as sunshine and fire.

Indoor use only.

Recommended cables

Properly shielded and grounded cables

and connectors must be used for

connection to host computers and/or

peripherals.

For the Bar Speaker

The nameplate is located on the bottom

of the Bar Speaker.

WARNING

3

GB

Table of Contents

What’s in the Box ..........................5

What You Can Do with the

System .....................................6

Guide to Parts and Controls ..........8

About the Home Menu ................ 13

Setup

Connecting a 4K TV and 4K

Devices .................................. 16

Connecting a TV or Portable Audio

Device via the ANALOG IN

Jack ........................................ 18

Connecting to a Wired

Network ................................. 19

Connecting to a Wireless

Network .................................20

Mounting the Main Unit on a

Wall ........................................ 22

Attaching the Foot .......................24

Listening to the Sound

Listening to the TV ......................25

Listening to the Connected AV

Device ....................................25

Listening to Music on a USB

Device ....................................26

Selecting the Sound Effect

Setting the Sound Effect that is

Tailored to Sound Sources

(SOUND FIELD) .......................28

Enjoying Clear Sound with Low

Volume at Midnight

(NIGHT) ..................................29

Making Dialogues Clearer

(VOICE) ...................................29

Adjusting the Volume of the

Subwoofer .............................30

Adjusting the Delay Between the

Picture and Sound .................30

Listening to Music/Sound

with the BLUETOOTH®

Function

Listening to Music from a Mobile

Device ....................................32

Listening to Sound of the

Connected TV or Device from

Headphones .......................... 35

Listening to Music/Sound

Using the Network Function

Listening to Music on your PC via a

Home Network ...................... 37

Listening to Music on the Mobile

Device with SongPal .............38

Using Chromecast built-in ...........39

Using Spotify ................................40

Using the MUSIC SERVICE

Button .................................... 41

Connecting the SongPal Link-

Compatible Device

(Wireless Multi Room/Wireless

Surround) ...............................42

Using the Various Functions/

Settings

Customizing the Speaker Settings

for Surround Sound ...............45

Performing the Wireless Connection

of the Subwoofer (LINK) ........46

Playing Compressed Audio Files or

CDs in Natural Sound Quality

(DSEE) .................................... 47

Enjoying Multiplex Broadcast Sound

(AUDIO) ..................................47

Deactivating Buttons on the Main

Unit ........................................48

Basic Setup



Startup Guide

(separate

document)

GB

4

GB

Changing the Brightness of the

Front Panel Display and

BLUETOOTH Indicator

(DIMMER) .............................. 48

Saving Power in Standby

Mode ..................................... 49

Using the Control for HDMI

Function ................................ 49

Using the “BRAVIA” Sync

Function .................................51

Using the Setup Display ...............53

Options Menu List ....................... 60

Troubleshooting

Troubleshooting ...........................61

Resetting the System .................. 69

Additional Information

Specifications .............................. 70

Power Consumption by the Setting

Value for Each Standby

Mode ......................................72

Playable Types of Audio Files ......73

Supported Input Audio

Formats ..................................74

Supported HDMI Video

Formats ..................................75

On BLUETOOTH

Communication .....................77

END USER LICENSE

AGREEMENT ...........................78

Precautions ................................. 82

Index ............................................ 86

5

GB

What’s in the Box

•Bar Speaker (1)

• Wall mounting bracket (2)

•Foot (2)

•Screw (2)

•Subwoofer (1)

• Remote control (1)

• R03 (size AAA) battery (2)

• HDMI cable (supports the specification

equal to Premium High Speed HDMI

cable with Ethernet) (1)

• WALL MOUNT TEMPLATE (1)

•Startup Guide

• Operating Instructions

6

GB

What You Can Do with the System

“Listening to Music

on a USB Device”

(page 26)

Blu-ray Disc™ player, cable

box, or satellite box, etc.

“Using the Control for HDMI Function”

(page 49)

“Using the “BRAVIA” Sync Function”

(page 51)

“Performing the Wireless

Connection of the Subwoofer

(LINK)” (page 46)

“Using Spotify” (page 40)*

“Using the MUSIC SERVICE Button”

(page 41)

“Listening to the TV” (page 25)

“Listening to the Connected AV Device” (page 25)

* This service may not be available in some

countries/regions.

* To play on the system, you need the Spotify

Premium account.

Connecting the TV and other devices

(refer to “Startup Guide” (separate

document) or see “Connecting a TV or

Portable Audio Device via the ANALOG

IN Jack” (page 18).)

7

GB

“Listening to Music from a Mobile

Device” (page 32)

“Listening to Music on the Mobile

Device with SongPal” (page 38)

Tip

SongPal has been updated and released as

Sony | Music Center. Sony | Music Center is

compatible with the system.

“Listening to Sound of the Connected TV or Device

from Headphones” (page 35)

“Listening to the Same Music

in Different Rooms (Wireless

Multi Room)” (page 42)

“Adding Rear Speakers

(Wireless Surround)” (page 42)

“Connecting to a Wired

Network” (page 19)

Internet

Router

Modem

Wireless LAN router

“Connecting to a Wireless

Network” (page 20)

“Listening to Music on your PC via a Home

Network” (page 37)

8

GB

Guide to Parts and Controls

Details are omitted from the illustrations.

Front

 (power) button

Turns on the system or sets it to

standby mode.

 INPUT button (page 13, 25)

 BLUETOOTH PAIRING button

(page 32)

 (MUSIC SERVICE) button

(page 41)

 VOL +/– buttons

 N-Mark (page 33)

When using the NFC function, touch

your NFC-compatible device to the

mark.

 (USB) port (page 26)

 BLUETOOTH indicator

– Flashes quickly in blue: During

pairing standby status

– Flashes in blue: BLUETOOTH

connection is being attempted

– Lights in blue: BLUETOOTH

connection has been established

 Front panel display

 Remote control sensor

Point the remote control at the

remote control sensor to operate

the system.

Bar Speaker (Main Unit)

9

GB

Rear

 LAN(100) port

 TV IN (OPTICAL) jack

 ANALOG IN jack

 HDMI IN 3 jack

For the specifications and note on

connections, see “Supported

HDMI Video Formats” (page 75).

 HDMI IN 2 jack

For the specifications and note on

connections, see “Supported

HDMI Video Formats” (page 75).

 HDMI IN 1 jack

For the specifications and note on

connections, see “Supported

HDMI Video Formats” (page 75).

 HDMI OUT (TV (ARC)) jack

For the specifications and note on

connections, see “Supported

HDMI Video Formats” (page 75).

10

GB

 Power indicator

– Lights in red: The subwoofer is in

standby mode

– Flashes in green: While

attempting link connection

– Lights in green: The subwoofer is

connected to the system with the

Link function

 (power) button

Turns on the subwoofer or sets it

to standby mode.

 LINK button (page 46)

 Ventilation holes

For safety, do not block the

ventilation holes.

Subwoofer

11

GB

 INPUT +/– (page 13, 25)

 (power)

Turns on the system or sets it to

standby mode.

 DISPLAY**

Displays playback information on

the TV screen.

Playback information is not

displayed for TV input.

 CLEAR AUDIO+ (page 28)

SOUND FIELD (page 28)

VOICE (page 29)

NIGHT (page 29)

 DIMMER (page 48)

 Color buttons

Shortcut keys for selecting items

on some menus.

 MUSIC SERVICE (page 41)

BLUETOOTH PAIRING (page 32)

 OPTIONS** (page 30, 60)

Displays the options menu on the

TV screen.

The options menu is not

displayed for the TV input.

BACK (page 13)

/// (page 13)

(enter) (page 13)

HOME (page 13)

 (muting)

Turns off the sound temporarily.

 (volume) +*/–

Adjusts the volume.

SW  (subwoofer volume) +/–

Adjusts the volume of the

subwoofer.

 Playback operation buttons

/ (rewind/fast forward)

Searches backward or forward.

/ (previous/next)

Selects the previous/next

chapter, track, or file.

 (play)*

Starts or re-starts playback

(resume play).

 (pause)

Pauses or re-starts playback.

 (stop)

Stops playback.

Remote Control

12

GB

 BLUETOOTH RX/TX (BLUETOOTH

receiver/transmitter) (page 36)

 AUDIO* (page 47)

*The AUDIO, , and  + buttons have a

tactile dot. Use it as a guide during

operation.

**When watching HDR signal and certain

4K format video, the OPTIONS and

DISPLAY buttons do not work and the

On-Screen Display (OSD) of the system is

not displayed. For details about the 4K

video format, see “Supported HDMI

Video Formats” (page 75).

13

GB

About the Home Menu

You can display the home menu on the TV screen by connecting the system and TV

with the HDMI cable (supplied). From the home menu, you can set the various

settings by selecting [Setup] or select the input or service that you want to watch

from the input list. The home menu is displayed in the language that is selected in

[Easy Setup]. (The following screen is an example when selecting English.)

1 Press HOME.

The home menu appears on the TV screen.

2 Press /// to select [Setup], an item on the input list, or [Wireless

Surround], then press .

The selected input, setup display, or setting display for the wireless

surround function appears on the TV screen.

To return to the previous screen, press BACK.

Using the Home Menu

[Setup]

Input list

[Wireless Surround]

HOME

BACK

///, (enter)

14

GB

Input list

[Setup]

See “Using the Setup Display” (page 53).

[Wireless Surround]

Displays the setting display for the wireless surround function that allows

you to use the wireless speakers (not supplied) as the surround speakers of

the system. Perform the setting by following the on-screen instructions.

For details about the supported wireless speakers, refer to the following

URL.

http://sony.net/nasite

Tip

You can also select the input by pressing INPUT +/– repeatedly.

In these Operating Instructions, the operations are described as steps that are

operated on the home menu displayed on the TV screen by using the remote control

while the system and TV are connected with the HDMI cable (supplied).

The operating steps that select items on the TV screen by using /// and are

simplified in the following way.

Example: Select [Setup] from the home menu.

The operation that selects an item by pressing /// and is expressed as

“select.”

Input name Explanation

[TV] Outputs the TV sound. (page 25)

[HDMI1] Outputs the sound of device that is connected to the HDMI IN 1

jack. (page 25)

[HDMI2] Outputs the sound of device that is connected to the HDMI IN 2

jack. (page 25)

[HDMI3] Outputs the sound of device that is connected to the HDMI IN 3

jack. (page 25)

[Bluetooth Audio] Outputs the sound of device that is connected with the

BLUETOOTH function. (page 32)

[Analog] Outputs the sound of device that is connected to the ANALOG IN

jack. (page 25)

[USB] Outputs music files stored on a connected USB device. (page 26)

[Home Network] Outputs music files on the device that is connected via the

network. (page 37)

[Music Service List] Displays the operation method for music services. (page 41)

About the Steps Description

15

GB

Example: Select [Network Settings] - [Internet Settings] - [Wired Setup] on the

home menu.

When repeating the operation that selects an item by pressing /// and , the

selected items are linked with “-.”

Tips

• You can use the buttons on the main unit if they have the same or similar names as those

on the remote control.

• Characters in brackets [ ] appear on the TV screen. Characters in quotes “ ” appear in the

front panel display.

16

GB

Basic Setup

Refer to Startup Guide (separate

document).

Connecting a 4K TV and

4K Devices

All HDMI jacks on the system support 4K

video format and HDCP2.2 (High-

bandwidth Digital Content Protection

System Revision 2.2).

To watch 4K video content, connect the

4K TV and 4K devices to the system via

an HDCP2.2-compatible HDMI jack on

each device.

You can only view 4K video content

through the HDCP2.2-compatible HDMI

jack connection.

 HDMI cable (supplied)

 HDMI cable (not supplied)

Use an HDMI cable which supports the 4K

video format that you want to watch. For

details, see “Supported HDMI Video

Formats” (page 75).

1 Check which HDMI IN jack on your

TV is compatible with HDCP2.2.

Refer to the operating instructions

of the TV.

Setup

When an HDCP2.2-

Compatible HDMI Jack on

the TV is Labeled with “ARC”

HDCP2.2-

compatible

HDMI jack

Blu-ray Disc player, cable box, or satellite

box, etc.

HDCP2.2-

compatible

HDMI jack

TV

17

GB

Setup

2 Connect the HDCP2.2-compatible

HDMI IN jack on the TV and HDMI

OUT jack on the main unit with the

HDMI cable (supplied).

TV connection is completed.

3 Connect the HDCP2.2-compatible

HDMI OUT jack of the 4K device

and HDMI IN jack of the main unit

with the HDMI cable (not

supplied).

Refer to the operating instructions

of the 4K device to check that the

HDMI OUT jack of the 4K device is

compatible with HDCP2.2.

4K device connection is completed.

If your TV’s HDCP2.2-compatible HDMI

IN jack is not compatible with ARC

(Audio Return Channel), the TV sound is

not output from the system.

In this case, connect the optical output

jack of the TV and the TV IN (OPTICAL)

jack on the main unit with the optical

digital cable (not supplied).

 HDMI cable (supplied)

 HDMI cable (not supplied)

Use an HDMI cable which supports the 4K

video format that you want to watch. For

details, see “Supported HDMI Video

Formats” (page 75).

 Optical digital cable (not supplied)

When an HDCP2.2-

Compatible HDMI Jack on

the TV is not Labeled with

“ARC”

HDCP2.2-

compatible

HDMI jack

Blu-ray Disc player,

cable box, or satellite

box, etc.

HDCP2.2-

compatible

HDMI jack

TV

18

GB

To watch 4K video content, select the

appropriate setting for the connected

4K TV and 4K device.

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [Setup] from the home

menu.

The setup display appears on the TV

screen.

3 Select [System Settings] - [HDMI

Settings] - [HDMI Signal Format].

4 Select the setting you want.

• [Standard format] (default

setting): Select when the

connected TV and devices support

standard bandwidth video

formats.

• [Enhanced format]: Select when

both the connected TV and

devices support high bandwidth

video formats such as 4K 60p

4:4:4 etc.

For the relation of the [HDMI Signal

Format] setting options, supported

video format signals, and HDMI

cables to be used, see “Supported

HDMI Video Formats” (page 75).

• Depending on the TV, the TV setting for

HDMI output may be required. Refer to

the operating instructions of the TV.

• When the picture is not displayed after

[HDMI Signal Format] is set to [Enhanced

format], set it to [Standard format].

Connecting a TV or

Portable Audio Device

via the ANALOG IN Jack

To connect following devices to the

system, connect them via the ANALOG

IN jack on the system.

– TV that does not have an HDMI jack

and optical digital output jack

– Portable audio device such as a

smartphone, WALKMAN®

If the TV’s headphone jack also serves as

an audio output jack, check the audio

output settings of the TV. For details, refer

to the operating instructions of the TV.

Setting the HDMI Signal

Format to Watch 4K Video

Content

Notes

Note

Smartphone,

WALKMAN®, other

audio devices etc.

TV

Analog audio cable

(not supplied)

Analog

audio out

19

GB

Setup

Connecting to a Wired

Network

Prepare the network by connecting the

system and PC to your home network

with a LAN cable.

The following illustration is the example

for connection of the system and PC to

your home network.

The server needs to be connected to the

same network as that of the system.

Tip

We recommend that you use a shielded

straight interface cable (not supplied).

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [Setup] from the home

menu.

The setup display appears on the TV

screen.

3 Select [Network Settings] -

[Internet Settings] - [Wired Setup].

4 Select [Auto].

The system starts network settings

and the network setting status

appears.

Press / to browse information,

and then press .

5 Select [Save & Connect].

The system starts connecting to the

network. For details, refer to the

messages that appear on the TV

screen.

Connecting to a PC or Router

with a LAN Cable

Internet

LAN cable

(not supplied)

Server

Router

Modem

Note

Connecting by Obtaining

the Network Information

Automatically

20

GB

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [Setup] from the home

menu.

The setup display appears on the TV

screen.

3 Select [Network Settings] -

[Internet Settings] - [Wired Setup].

4 Select [Manual].

5 Perform the setting by following

the on-screen instructions.

The system starts network settings

and the network setting status

appears.

Press / to browse information,

and then press .

6 Select [Save & Connect].

The system starts connecting to the

network. For details, refer to the

messages that appear on the TV

screen.

Connecting to a Wireless

Network

Prepare the network by connecting the

system and PC to your wireless LAN

router.

The server needs to be connected to the

same network as that of the system.

When your wireless LAN router (access

point) is Wi-Fi Protected Setup (WPS)-

compatible, you can easily set the

network settings with the WPS button.

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [Setup] from the home

menu.

The setup display appears on the TV

screen.

3 Select [Network Settings] -

[Internet Settings] - [Wireless

Setup] - [Wi-Fi Protected Setup™

(WPS)].

4 Select [Start].

5 Press the WPS button on the

access point.

The system starts connecting to the

network.

Connecting by Using a

Fixed IP Address

Note

Connecting with the WPS

Button

La page charge ...

Sony HT-CT800 Mode d'emploi

Sony HT-CT800 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents