Zebra MK3000 Guide de référence

Marque: Zebra

Modèle: MK3000

Catégorie: Lecteurs de codes à barres

Taper: Guide de référence

MK3000

Quick Reference Guide

Zebra reserves the right to make changes to any product to improve reliability, function,

or design.

Zebra does not assume any product liability arising out of, or in connection with, the

application or use of any product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under

any patent right or patent, covering or relating to any combination, system, apparatus,

machine, material, method, or process in which Zebra products might be used. An

implied license exists only for equipment, circuits, and subsystems contained in Zebra

products.

Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many

jurisdictions worldwide. All other trademarks are the property of their respective

owners.

Zebra Technologies Corporation

Lincolnshire, IL U.S.A.

http://www.zebra.com

Warranty

For the complete Zebra hardware product warranty statement, go to:

http://www.zebra.com/warranty

Zebra Technologies Corporation

Lincolnshire, IL U.S.A.

http://www.zebra.com

Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in

many jurisdictions worldwide. All other trademarks are the property of their

respective owners.

72-148309-03 Revision A — May 2015

Health and Safety Recommendations

Ergonomic Recommendations

Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the

recommendations below. Consult with your local Health & Safety Manager to ensure

that you are adhering to your company's safety programs to prevent employee injury.

•

Reduce or eliminate repetitive motion

•

Maintain a natural position

•

Reduce or eliminate excessive force

•

Keep objects that are used frequently within easy reach

•

Perform tasks at correct heights

•

Reduce or eliminate vibration

•

Reduce or eliminate direct pressure

•

Provide adjustable workstations

•

Provide adequate clearance

•

Provide a suitable working environment

•

Improve work procedures.

Regulatory Information

This guide applies to the following Model Numbers: MK3000, MK3900

All wireless information only applies to MK3900.

All Zebra devices are designed to be compliant with rules and regulations in locations

they are sold and will be labeled as required.

Local language translations are available at the following website:

http://www.zebra.com/support

Any changes or modifications to Zebra equipment, not expressly approved by Zebra,

could void the user's authority to operate the equipment.

Radio Modules

The device contains approved radio module(s). These module(s) are identified below.

Zebra SDIO Radio module with 802.11a/b/g Wireless LAN, Type: 21-92955

Wireless Device Country Approvals

Regulatory markings, subject to certification, are applied to the device signifying the

radio(s) is/are approved for use in the following countries: United States, Canada,

Japan, China, S. Korea, Australia, and Europe

Please refer to the Declaration of Conformity (DoC) for details of other country

markings. This is available at http://www.zebra.com/doc

Note

: For 2.4GHz or 5GHz Products: Europe includes, Austria, Belgium, Bulgaria,

Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain,

Sweden, Switzerland and the United Kingdom.

Country Roaming

This device incorporates the International Roaming feature (IEEE802.11d) which will

ensure the product operates on the correct channels for the particular country of use.

Ad-Hoc Operation (5 GHz band)

Ad-Hoc operation is limited to Channels 36-48 (5150-5250 MHz). Use of this band is

restricted to Indoor Use Only, any other use will make the operation of this device illegal.

Frequency of Operation - FCC and IC

5 GHz Only

The use in the UNII (Unlicensed National Information Infrastructure) band 1 (5150-5250

MHz) is restricted to Indoor Use Only; any other use will make the operation of this

device illegal.

Industry Canada Statement:

Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce

potential for harmful interference to co-Channel mobile satellite systems. High power

radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz

and 5650-5850 MHz and these radars could cause interference and/or damage to LE-

LAN devices.

Avertissement: Le dispositive fonctionnant dans la bande 5150-5250 MHz est réservé

uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage

préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.

Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-

à-d., qu'ils ont la priorité) pour les bands 5250-5350 MHz et 5650-5850 MHz et que ces

radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

2.4 GHz Only

The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The

range of channels is limited by firmware.

Warnings for Use of Wireless Devices

Please observe all warning notices with regard to the usage of wireless

devices.

Potentially Hazardous Atmospheres - Vehicles Use

You are reminded of the need to observe restrictions on the use of radio devices in fuel

depots, chemical plants etc. and areas where the air contains chemicals or particles

(such as grain, dust, or metal powders) and any other area where you would normally

be advised to turn off your vehicle engine.

Potentially Hazardous Atmospheres - Fixed Installations

You are reminded of the need to observe restrictions on the use of radio devices in fuel

depots, chemical plants etc. and areas where the air contains chemicals or particles

(such as grain, dust, or metal powders).

Safety in Aircraft

Switch off your wireless device whenever you are instructed to do so by airport or airline

staff. If your device offers a 'flight mode' or similar feature, consult airline staff as to its

use in flight.

Safety in Hospitals

Wireless devices transmit radio frequency energy and may affect medical electrical

equipement.

Wireless devices should be switched off wherever you are requested to do so in

hospitals, clinics or healthcare facilitlies. These requests are designed to prevent

possible interference with sensitive medical equipement.

Pacemakers

Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be

maintained between a handheld wireless device and a pacemaker to avoid potential

interference with the pacemaker. These recommendations are consistent with

independent research and recommendations by Wireless Technology Research.

Persons with pacemakers:

•

Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker

when turned ON.

•

Should not carry the device in a breast pocket.

•

Should use the ear furthest from the pacemaker to minimise the potential for

interference.

•

If you have any reason to suspect that interference is taking place, turn OFF your

device.

Other Medical Devices

Please consult your physician or the manufacturer of the medical device, to determine if

the operation of your wireless product may interfere with the medical device.

RF Exposure Guidelines

Safety Information

Reducing RF Exposure - Use Properly

Only operate the device in accordance with the instructions supplied.

International

The device complies with internationally recognized standards covering human

exposure to electromagnetic fields from radio devices. For information on

"International" human exposure to eletromagnic fields refer to the Zebra Declaration of

Conformity (DoC) at http:/www.zebra.com/doc

Europe

To satisfy EU RF exposure requirements, a mobile transmitting device must operate

with a minimum separation distance of 20 cm or more from a person's body.

Co-located statement

To comply with FCC RF exposure compliance requirement, the antenna used for this

transmitter must not be co-located or operating in conjunction with any other transmitter/

antenna except those already approved in this filling.

Remote and Standalone Antenna Configurations

To comply with FCC RF exposure requirements, antennas that are mounted externally

at remote locations or operating near users at stand-alone desktop of similar

configurations must operate with a minimum separation distance of 20 cm from all

persons.

Laser Devices

Complies with 21CFR 1040.10 and 1040.11 except for deviations pursuant to

Laser Notice No. 50, dated June 24, 2007 and EN60825-1:2007 and

IEC 60825-1(ED.2).

The laser classification is marked on one of the labels on the device.

Class 1 Laser devices are not considered to be hazardous when used for their intended

purpose. The following statement is required to comply with US and international

regulations:

Caution: Use of controls, adjustments or performance of procedures other than those

specified herein may result in hazardous laser light exposure.

Class 2 laser scanners use a low power, visible light diode. As with any very bright light

source, such as the sun, the user should avoid staring directly into the light beam.

Momentary exposure to a Class 2 laser is not known to be harmful.

Scanner Labeling

LED Output

This device contains LEDs for illuminating the bar code.

Illumination:

Optical Output: 0.91mW

Pulse Duration: 970uS

Emitted Wavelength: 600-630nm

Viewing the LED output with certain optical instruments (for example, eye loupes,

magnifiers and scopes) may pose an eye hazard.

Caution - Use of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous LED light exposure.

Power Supply

This device must be powered from an 802.3af or 802.3at compliant power source which

has been certified by the appropriate agencies, or by a LISTED, Type no. PWRS-14001

(24Vdc, 1.5A) , direct plug-in power supply, marked Class 2 or LPS (IEC60950-1,

SELV). Use of alternative Power Supply will invalidate any approvals given to this unit

and may be dangerous.

Radio Frequency Interference Requirements-FCC

Note: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the

FCC rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However there is

no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna

•

Increase the separation between the equipment and receiver

•

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected

•

Consult the dealer or an experienced radio/TV technician for help.

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause

undesired operation.

CAUTION- CLASS 2 LASER, 1M LED LIGHT WHEN OPEN. DO NOT STARE INTO BEAM

OR VIEW WITH OPTICAL INSTRUMENTS.

ATTENTION- LUMIÉRE LASER DE CLASSE 2 EN CAS D'OUVERTURE. NE PAS

REGARDER DANS LE FAISCEAU.

VORSICHT- LASERLICHT KLASSE 2, WENN ABDECKUNG GEÖFFNET. NICHT

IN DEN STRAHL BLICKEN.

⊼ᛣ˖ᠧᓔᯊ

᳝



㉏▔ܝ

0

㉏

/('

䕤ᇘ

࣓Ⳉ㾚

៪䗮䖛ܝᄺҾ఼Ⳉ㾚

ܝᴳ

LED light is emitted from this aperture:

Radio Frequency Interference Requirements - Canada

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Radio Transmitters

For RLAN Devices:

The use of 5 GHz RLAN's, for use in Canada, have the following restrictions:

•

Restricted Band 5.60 - 5.65 GHz

This device complies with RSS 210 of Industry & Science Canada. Operation is subject

to the following two conditions: (1) this device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux

appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions

suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce

dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de

provoquer un fonctionnement indésirable.

Label Marking: The Term "IC:" before the radio certification only signifies that Industry

Canada technical specifications were met.

CE Marking and European Economic Area (EEA)

The use of 2.4GHz RLAN's, for use through the EEA, have the following restrictions:

•

Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -

2.4835 GHz

Statement of Compliance

Zebra hereby, declares that this device is in compliance with the essential requirements

and other relevant provisions of Directives 1999/5/EC and 2011/65/EU. A Declaration of

Conformities may be obtained from http://www.zebra.com/doc.

Japan (VCCI) - Voluntary Control Council for Interference

Class B ITE

Korea Warning Statement for Class B ITE

Other Countries

Australia

Use of 5GHz RLAN's in Australia is restricted in the following band 5.50 - 5.65GHz.

Brazil

Regulatory declarations for MK3900 - BRAZIL

Declarações Regulamentares para MK3900 - BRAZIL

Nota: "A marca de certificação se aplica ao Transceptor, modelo MK3900. Este

equipamento opera em caráter secundário, isto é, não tem direito a proteção contra

interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar

interferência a sistemas operando em caráter primário."

Para maiores informações sobre ANATEL consulte o site: www.anatel.gov.br

Chile

"Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de

telecomunicaciones, relativa a radiaciones electromagnéticas.".

China

Mexico

Restrict Frequency Range to: 2.450 - 2.4835 GHz.

S. Korea

For a radio equipment using 2400~2483.5MHz or 5725~5825MHz, the following two

expressions should be displayed.

Taiwan

5.25-5.35

Waste Electrical and Electronic Equipment (WEEE)

English: For EU Customers: All products at the end of their life must be returned to Zebra for recy-

cling. For information on how to return product, please go to: http://www.zebra.com/weee.

Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се

връщат на Zebra за рециклиране. За информация относно връщането на продукти, моля

отидете на адрес: http://www.zebra.com/weee.

Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit spoleèno-

sti Zebra k recyklaci. Informace o zpùsobu vrácení produktu najdete na webové stránce:

http://www.zebra.com/weee.

Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er udtjent. Læs

oplysningerne om returnering af produkter på: http://www.zebra.com/recycling/weee.

Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum

Recycling an Zebra zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie

unter http://www.zebra.com/weee.

Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της

διάρκειας ζωής τους, πρέπει να

επιστρέφονται στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την επιστροφή

ενός προϊόντος, επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο ∆ιαδίκτυο.

Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil

Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi:

http://www.zebra.com/weee.

Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Zebra al final

de su ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un pro-

ducto, visite: http://www.zebra.com/weee.

Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être

retournés à Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consul-

tez : http://www.zebra.com/weee.

Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono

essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalità di restituzi-

one, visitare il seguente sito Web: http://www.zebra.com/recycling/weee.

Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Zebra otr-

reizējai pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Zebra, lū

dzu, skatiet:

http://www.zebra.com/weee.

Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti utilizuoti į

kompaniją „Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite:

http://www.zebra.com/weee.

Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell eljuttatni újra-

hasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a

http://www.zebra.com/weee weboldalra.

Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu

rritornati għand Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk

jogħġbok żur: http://www.zebra.com/weee.

Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar

Zebra te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer

informatie over het terugzenden van producten.

Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ do firmy

Zebra w celu ich utylizacji. Informacje na temat zwrotu produktów znajduj¹ siê na stronie internetowej

http:/www.zebra.com/weee.

Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Zebra para

reciclagem. Para obter informações sobre como devolver o produto, visite:

http://www.zebra.com/weee.

Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare, trebuie retur-

nate la Zebra pentru reciclare. Pentru informaţii despre returnarea produsului, accesaţi:

http://www.zebra.com/weee.

Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby ich životnosti

vrátené spoločnosti Zebra na recykláciu. Bližšie informácie o vrátení výrobkov nájdete na:

http://www.zebra.com/weee.

Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Zebra za

reciklažo. Za informacije o vraèilu izdelka obišèite: http://www.zebra.com/weee.

Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Zebra-

yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa

http://www.zebra.com/weee.

Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Zebra för

återvinning. Information om hur du returnerar produkten finns på

http://www.zebra.com/weee.

Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Zebra'ya iade

edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin:

http://www.zebra.com/weee.

Unpacking

Remove the MK3000 from its packing and inspect it for damage. Keep the packing, it is

the approved shipping container and should be used if the device needs to be returned

for servicing.

MK3000 Parts

You must place a ferrite core on the Ethernet cable as follows:

1. Open the ferrite core and place it on the cable.

2. Route the cable outside the ferrite core once and then close the ferrite core.

Mounting

Use a standard VESA mount to mount the device:

1. Select a VESA mount that conforms to the 100 mm VESA specification.

2. The device’s mounting inserts are M4 x 8.1 mm. When selecting an appropriate

screw type, ensure its length does not penetrate the device’s back housing more

than 8.1 mm after going through the mounting plate.

3. Align the VESA mounting holes with the mounting holes on the back of the device.

4. Insert the screws through each of the four aligned mounting holes.

Service Information

If you have a problem using the equipment, contact your facility’s Technical or Systems

Support. If there is a problem with the equipment, they will contact Zebra Support at:

http://www.zebra.com/support

For the latest version of this guide go to: http://www.zebra.com/support

Touch Screen / LCD

Speakers

Scanner Window

Microphone

Function Buttons

Cable Run

Power

Mini-USB Host/

Client Port

RJ45 (Ethernet)

MicroSD Card Slot

Headset Jack

Cable Run

Mounting Hole (4)

Cable Run

Mini-USB

Host Ports (2)

Reset Button

Back View

Zebra MK3000 Guide de référence

Marque: Zebra

Modèle: MK3000

Catégorie: Lecteurs de codes à barres

Taper: Guide de référence

Télécharger le PDF

rapport

dans d''autres langues

English: Zebra MK3000 Reference guide

Zebra MK3000 Guide de référence

Zebra MK3000 Guide de référence

dans d''autres langues

Documents connexes

Autres documents