KEESON RF396B Manuel utilisateur

Taper
Manuel utilisateur
Issue Department
Bedding
Division
Date 2021-12-11
System Instruction
Author
User Manual of RF396B
Edition
1.0
Page 1 of 4
User Manual of RF396B
Figure 1 button ofremote
Child lock
Lumbar up
Head up
Lumbar down
Head down
massage
Flat
Zero position
TV position
Bed lamp
Antisnore
Foot up
Doot down
1 /4
Item
1.1 Child Lock 1
Click the Child Lock button for 3 second to lock or unlock the remote.
1.2 Bed lamp 2
Click the bed lamp button to open or shut the light under the bed.
1.3 Antisnore 3
Click the Antisnore button, the bed moves to Antisnore position, press and hold Antisnore
button for 5s, until backlight flashes, the control set the current position as Antisnore position
1.4 TV 4
Click the TV button, the bed moves to TV position, press and hold TV button for 5s, until
backlight flashes, the control set the current position as TV position.
1.5 LUMBAR UP 5
Press and hold LUMBAR UP button, Lumbar actuator moves out, stop when released.
1.6 LUMBAR DOWN 6
Press and hold LUMBAR DOWN button, Lumbar actuator moves in, stop when released.
2 /4
1.7 HEAD UP 7
Press and hold HEAD UP button, head actuator moves out, stop when released.
1.8HEAD DOWN 8
Press and hold HEAD DOWN button, head actuator moves in, stop when released.
9FOOT UP 9
Press and hold FOOT UP button,foot actuator moves out, stop when released.
1.10 FOOT DOWN 10
Press and hold FOOT DOWN button, foot actuator moves in, stop when released.
1.11 ZG 13
Click the ZG button, the bed moves to zeroG position, press and hold zeroG button for 5s,
until backlight flashes, the control set the current position as zeroG position
1.12 MASSAGE
Click the MASSAGE button, massage motor switches massage intensity, massage
intensityswitches among 0-1-2-3
3 / 4
1.13 FLAT 13
Click the FLAT button, the bed goes flat.
FCC
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the users authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
ISED RSS Warning:
This device complies with Innovation,Science and Economic Development Canada licenceexempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radioexempts de
licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
4 /4
ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled
environment.The device has been evaluated to meet general RF exposure requirement.
Le matériel est conforme aux limites de dose d'exposition aux rayonnements énoncés
pour fac un autre environnement.ce dispositif a été évalué à satisfaire l'exigence
générale de l'exposition aux rf.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

KEESON RF396B Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues