Casselin CAP600L Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

Armoire positive / négative
CAN400L
CAN400LB
CAN600LB
CAN600L
CAP400L
CAP400LB
CAP600L
CAP600LB
SAS CASSELIN
83 rue Marcel Mérieux 69960 Corbas FRANCE
Tél : +33 (0)4 82 92 60 00 - Mail : contact@casselin.com
P2M058STD-Ver1.1
Instruction Manual
Bedienungsanleitung
Manuel d’utilisation
Manual de instrucciones
Manual de instruções
Istruzioni d’uso
GB
DE
FR
ES
PT
IT
1 P2M058STD-Ver1.1
P2M058STD-Ver1.1 2
Dear Customer,
Congratulations on your purchase of this product.
Please take a few minutes before starting operation of the appliance and read the following operating
instructions.
Table of Contents
Product Overview ............................................................................................................... 3
Safety Tips ........................................................................................................................... 4
Intended Use ...................................................................................................................... 5
Location and Installation .................................................................................................... 6
Operation ............................................................................................................................ 7
Cleaning, Care & Maintenance ......................................................................................... 12
Troubleshooting ................................................................................................................ 13
Disposal ............................................................................................................................. 14
Technical data ................................................................................................................... 15
Warranty ........................................................................................................................... 15
3 P2M058STD-Ver1.1
Product Overview
Article Description
Upright Chiller 200Lt. / 400Lt. / 600Lt.
Upright Freezer 200Lt. / 400Lt. / 600Lt.
P2M058STD-Ver1.1 4
Safety Tips
IMPORTANT: For your safety read the manual
carefully before installing or using this product. Save
this manual for future reference.
Consult Local and National Standards to comply with the following:
1. Health and Safety at Work Legislation
2. Fire Precautions
3. IEE Wiring Regulations
4. Building Regulations
5. DO NOT use the appliance outside.
6. DO NOT attempt to service the item yourself.
7. DO NOT use damaged appliances. If you are in any doubt, consult service
agent.
8. DO NOT use electrical appliances inside the appliance (e.g. heaters, ice-
cream makers etc.), unless they are of the type recommended by the
manufacturer.
9. Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
10. DO NOT use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
11. DO NOT damage the refrigerant circuit.
12. DO NOT stand or support yourself on the base, drawers or doors.
13. DO NOT allow oil or fat to come into contact with the plastic components
or door seal. Clean immediately if contact occurs.
14. This unit can be used by children aged above 8 years and persons with
reduced physical, sensory or mental capabilities or lacking of experience
and knowledge who have been given supervision or using instruction of
the device and understand the resulting risks (for European market).
15. Do not let children play with the appliance.
16. Cleaning and user maintenance must not be carried out by children
without supervision.
17. DO NOT place combustible, explosive or volatile articles, corrosive acids
or alkalis or liquids in the appliance.
5 P2M058STD-Ver1.1
Safety Tips
18. DO NOT use this appliance to store medical supplies.
19. DO NOT use jet/pressure washers to clean the appliance.
20. DO NOT allow children to play with the packaging, and dispose plastic
bags safely.
21. Bottles that contain a high percentage of alcohol must be sealed and
placed vertically in the refrigerator.
22. Always carry, store and handle the appliance in a upright orientation and
move by holding the base of the appliance.
23. Always switch off and disconnect the power supply to the unit before
cleaning.
24. If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
25. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety
(for market beyond European).
26. Children should be supervised to ensure that they do not play with the
appliance.
27. For indoor use only. Not suitable for installation in an area where a water
jet could be used. Shall not be cleaned by a water jet.
28. To guarantee safe operation, ensure that the appliance is set up and
connected as described in the instruction manual.
29. Any repairs and work on the appliance should only be carried out by the
customer service department/ qualified technician.
30. The key to the electrical cabinet should be kept out of the reach of
children and users.
31. Do not store explosive substances such as aerosol cans with a flammable
propellant in this appliance.
Intended Use
Only use this appliance for cooling and storage of food and beverage for commercial purposes.
P2M058STD-Ver1.1 6
Location and Installation
Remove the appliance from the packaging. Make sure that all protective plastic film and coatings are
thoroughly removed from all surfaces. To prevent injury or damage to the unit, we recommend that the
appliance should be unpacked and set up by two people.
The climatic class can be found on the rating plate. It specifies the ambient temperatures at which the
appliance may be operated. The rating plate can be found inside the appliance.
Climate Class
Max. Ambient Temperature
Relative Humidity
3
25
60%
4
30
55%
5
40
40%
Maintain a distance of 20 cm (7 inches) between the appliance and walls or other objects for ventilation.
Increase this distance if the obstacle is a heat source.
The appliance should be placed on a solid flat and stable floor to reduce noise and vibration. Level the
appliance by adjusting the feet.
Avoid locating the unit in direct sunlight or near heat sources such as ovens or radiators.
Please make sure the appliance is properly ventilated.
Check that the power supply and voltage used comply with the details on the rating plate. The plug
must be accessible after installation.
Correctly connect and disconnect the plug. When inserting ensure the plug is fully engaged. While
unplugging hold the body of the plug. Never pull the supply cord directly.
If the unit is to be shut down for long period, switch it off and disconnect the plug from socket outlet.
Clean the appliance and leave the door open to prevent odour.
Important! For your personal safety, this appliance must be properly grounded (earthed). This
appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be
inserted into an outlet that is properly grounded and installed. Consult a qualified electrician or service
centre if you do not completely understand the grounding instructions. If doubt exits whether the
appliance is properly grounded, have a qualified electrician check the circuit to make sure the outlet is
properly grounded.
If the cable does not reach the nearest socket, either rearrange your store layout or ask a qualified
electrician to fix a new socket.
If power is cut off, wait for at least 3 minutes before restarting the appliance to avoid damaging the
compressor.
Slide the shelf/drawer into place.
Note: If the unit has not been stored or moved in an upright position, let it stand upright for
approximately 12 hours before operation.
Note: Before using the appliance for the first time, clean the shelves and interior with soapy water.
7 P2M058STD-Ver1.1
Operation
Turn on
Close the door of the appliance.
Plug in the cabinet.
The display shows the actul cabinet temperature.
P2M058STD-Ver1.1 8
Operation
Temperature Setting and Control (Mechanical Thermostat)
The front panel of the thermostat display:
How to change the set point
Turn the mechanical knob to adjust the Temperature.
Turn clockwise to lower the temperature
Turn anti clockwise to increase the temperature
Manual Defrost
Unplug the unit from the Powersupply
9 P2M058STD-Ver1.1
Operation
Temperature Setting and Control (Dixell)
The front panel of the thermostat display:
1. Defrost indicator
2. Compressor operation indicator
3. SET key
4. Temperature modification keys
5. Defrost button
How to see the set point
• Push and immediately release the SET key, the set point will be showed;
• Push and immediately release the SET key or wait about 15s to return to normal visualisation.
How to change the set point
• Push the SET key for more than 2 seconds to change the set point value;
• The value of the set point will be displayed and the “°C” starts blinking;
• To change the set value push the „ “ (up) or “ ” (down) arrows within 15s.
• To memorise the new set point value push the SET key again or wait 15s.
Automatic defrost
• The appliance will automatically run defrost cycles.
Note: The cycle starts from the time the appliance is initially powered up.
Manual Defrost:
• Press and hold the DEFROST button for 5 seconds.
• The defrost cycle will start immediately and the Defrost LED illuminates.
Note: Starting a manual defrost also resets the automatic defrost timer.
How to turn ON / OFF the light
Press and release the key, the light will switch ON or OFF.
Note: Light logo is present and active only for model with glass door.
P2M058STD-Ver1.1 10
Operation
How to reverse the door
11 P2M058STD-Ver1.1
Operation
How to install high feet
Procedure: Follow the 8 steps below to change the feet.
Note: If you intend to purchase optional accessories, please ask our sales staff for advice.
Caution:
Unplug the appliance from main socket before change.
Securing the fork lift before change.
Securing all drawers, shelves, lids and doors before change.
Empty the cabinet before change.
P2M058STD-Ver1.1 12
Cleaning, Care & Maintenance
Routine maintenance
Switch off and disconnect from the power supply before cleaning.
Clean the enclosure and interior of the appliance as often as possible.
Clean the unit with moist cloth. Never allow the switch, control panel, cable or plug to get wet.
Do not use abrasive cleaning agents. These can leave harmful residues. Use only mild soapy water.
Clean the door seal with water only.
Ensure that no cleaning water penetrates into the electrical components.
Must not be cleaned by a water jet.
Always wipe dry after cleaning with soft cloth.
Do not allow water used in cleaning to run through the drain hole into the evaporation pan.
Take care when cleaning the rear of the appliance.
An agent or technician must carry out repairs if required.
If the appliance is to be left inactive for long periods, unplug the appliance after having turned the
switch to OFF position, empty the refrigerating compartment and clean thoroughly.
Special maintenance
The instructions given in the following paragraph can be followed from qualified technicians
Periodically clean the condenser using suitable tools (vacuum cleaner or soft brushes) can extend
the life of the appliance.
Check that the electrical connections are not loose.
Check that the thermostat and the sensor are in proper working order.
13 P2M058STD-Ver1.1
Troubleshooting
Fault
Potential Failure
Problem solving action
The appliance is not
working
The unit is not switched on
Check the unit is plugged in correctly and
switched on
Plug and/ or lead are damaged
Call your agent or qualified technician
Fuse in the plug has blown
Replace the fuse (UK Plug)
Power supply
Check power supply
The appliance turns
on, but the
temperature
is too high/ low
Too much ice on the evaporator
Defrost the appliance
Condenser blocked with dust
Call your agent or qualified technician
Doors are not shut properly
Check doors are shut and seals are not
damaged
Appliance is located near a heat
source or air flow to the condenser is
being interrupted
Move the refrigerator to a more suitable
location
Ambient temperature is too high
Increase ventilation or move appliance to
a cooler position
Unsuitable foodstuffs are being
stored in the appliance
Remove any excessive hot foodstuffs or
blockages to the fan
Appliance is overloaded
Reduce the amount of food stored in the
appliance
The appliance is
unusually loud
Loose nut/ screw
Check and tighten all nuts and screws
The appliance has not been installed
in a level or stable position
Check installation position and change if
necessary
The appliance is
leaking water
The appliance is not properly leveled
Adjust the screw feet to level the
appliance (if applicable)
The discharge outlet is blocked
Clear the discharge outlet
Movement of water to the drain is
obstructed
Clear the floor of the appliance (if
applicable)
The water container is damaged
Call your agent or qualified Technician
The drip tray is overflowing
Empty the drip tray (if applicable)
P2M058STD-Ver1.1 14
Disposal
If the appliance is no longer of use and you wish to dispose of it, remove doors to prevent any small child
from be trapped inside. Then please do in an environmentally correct way.
Contact a qualified service technician:
1. To recover all Freon/refrigerant
2. To remove the compressor or remove the oil from the compressor
3. To remove the flammable insulation blowing gases
Then the distributor/ retailer can contact their local metal recycling center to pick up the remaining cabinet,
shelves, etc.
There may be special requirements or conditions. You can obtain information on the disposal of
refrigeration appliances from:
Your supplier
Government authorities (The local council, Ministry of the Environment, etc.)
By law, disposal of hazardous wastes may be subject to fines and imprisonment under the provisions of the
environmental regulations.
1. The refrigerant of this unit is a hydrocarbon refrigerant and is covered by the Kyoto Protocol.
2. Releasing the refrigerant to the atmosphere will harm the environment by contributing to the
global warming. The Global Warming Potential (GWP) of R134a is 1430, of R404a is 3922, of
R600a/R290 is 3.
Disposal
Discarded electric appliances are recyclable and should not be discarded in the domestic
waste! Please actively support us in conserving resources and protecting the
environment by returning this appliance to the collection centres (if available).
Dispose of packaging in accordance to applicable legal regulations.
15 P2M058STD-Ver1.1
Technical data
Model
Upright Chiller / Freezer 200Lt. / 400Lt. / 600Lt.
Climate Class
Please refer to the information indicated on the product. You will find
the information on the rating label on the back of the unit as well as
inside the cooling compartment. The circuit diagram is displayed on the
back of the unit as well as inside the cooling compartment
Refrigerant Gas
Refrigerant Charge
Temperature Range (°C)
Input Power
Rated Frequency
Rated Voltage
Internal volume
Net Weight
Gross Weight
Foaming Agent
External Dimension (mm)
CAUTION: RISK OF FIRE AND EXPLOSION WITH FLAMMABLE
REFRIGERANT R600a/R290.
Warranty
A statutory warranty applies for this product.
Damages caused by wrong treatment or operation, by false placement or storage, improper connection or
installation, as well as force or other external influences are not covered by this warranty. We recommend
careful reading of the operating instructions as it contains important information.
Note:
1. In case this product does not function correctly, please firstly check if there are other reasons, e.g. for
electrical appliances interruption of the power supply, or generally incorrect handling are the cause.
2. Please note that, where possible, the following documents or rather information should be provided
together with your faulty product:
Purchase receipt
Model description/ Type/ Brand
Describe the fault and problem as detailed as possible
In the case of a claim for guarantee or defects, please contact the seller.
GWL 8/14 EN
P2M058STD-Ver1.1 16
17 P2M058STD-Ver1.1
P2M058STD-Ver1.1 18
Übersetzung der Originalbetriebsanleitung
Sehr geehrte Kundin,
sehr geehrter Kunde,
herzlichen Glückwunsch zum Kauf dieses Produktes.
Bitte nehmen Sie sich einige Minuten Zeit, bevor Sie das Gerät in Betrieb nehmen und lesen Sie die
nachfolgende Gebrauchsanweisung durch.
Inhaltsverzeichnis
Produktübersicht .............................................................................................................. 19
Sicherheitshinweise .......................................................................................................... 20
Bestimmungsgemäßer Gebrauch ..................................................................................... 22
Platzierung und Installation .............................................................................................. 23
Funktion und Handhabung ............................................................................................... 24
Reinigung, Pflege und Wartung ........................................................................................ 29
Fehlerbehebung ................................................................................................................ 30
Entsorgung ........................................................................................................................ 31
Technische Daten ............................................................................................................. 32
Gewährleistung ................................................................................................................. 32
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98

Casselin CAP600L Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à